Hello guys, i have a problem with my sgs .. after downgrade from jv9 to froyo i've got my sgs bricked.. cannot enter do download mode by 3 button combo and by usb jiig is well ( jig is working, checked on sgs2) only thing happening is when i connect it by usb cable to my laptop i getting info the windows cannot find the driver for it and after few seconds is disconnecting.
Any ideas how to get it back to life ?
Thanx.
ps. sorry for my english. Cherrs
What happens when you turn it on normally?
At what screen does it stop?
Can you enter recovery mode?
its totally dead.
Remove the battery, wait a few minutes ( In fact, 30 sec should be alright ) the put it back. Press power button, if you see the phone -- triangle -- pc image, then just remove the battery again, put it back and plug your jig. If you see nothing i'm almost sure your screwed.
Steps:
First Remove your battery and wait 60 seconds
Then put the battery back in
There will be a small hole in the right side of the camera like a soft reset hole
take a paper clip
insert it in the hole and wait 25 seconds while pressing it in
then go into the download mode but the volume down +home button + power button
If the button method doesn't work try using the jig
Now it should work
yaro014 said:
Hello guys, i have a problem with my sgs .. after downgrade from jv9 to froyo i've got my sgs bricked.. cannot enter do download mode by 3 button combo and by usb jiig is well ( jig is working, checked on sgs2) only thing happening is when i connect it by usb cable to my laptop i getting info the windows cannot find the driver for it and after few seconds is disconnecting.
Click to expand...
Click to collapse
Can you try running USBDeview from http://www.nirsoft.net/utils/usb_devices_view.html . You should see all your existing devices like mouse, keyboard etc. Then plug the phone in, and if it shows up in USBDeview tell me what it says in these columns for the phone device:
VendorID, ProductID, USB Class, USB SubClass
You may need a couple of tries to get all the numbers if it's disconnecting after a few seconds.
I'm interested because it could be the type of brick we are trying to fix in this thread where the bootloaders have been corrupted and it is going into processor recovery mode. We don't have a fix for you but if I'm right it will confirm that you need to get the phone reflashed by Samsung. Ask them how they do it while you're there.
hmm i cannot see any hole on the right side of the camera.. there is only connector looks like gps antenna.
i tried on 3 different batteries and i tried to take battery out for few minutes and still not work..
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
yaro014 said:
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
Click to expand...
Click to collapse
Just say to them i was updating my phones software via kies and my pc crashed because of some other application so it got interrupted in the half way now i can boot into my phone.
do you think they will accept it ? i mean .. if they will fix it and say this is my fault then i'll need to pay for this fix ?
anyone guys has experience with it ? how long it takes ?
yaro014 said:
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
Click to expand...
Click to collapse
Yes, they won't be able to tell what caused it, though your custom firmware could all reappear if they only reflash the bootloaders. But at least your phone will be fixed.
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
yaro014 said:
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
Try reinstalling the USB drivers from my signature.
yaro014 said:
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
The brand market can see if u rooted the phone,
But i i also got this kind of brick, when i instaled a 9000m modem to my int i9000,
what i did i heated the phone, this is not a joke, a heated the phone used adb to enter download mode and i flashed stock 2.2 from samfirmware.com
The phone newer worked well so my provider changed the phone and didn't saw that i root it.
try adb and heating than the 3button combo.
good luck
yaro014 said:
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
Yep, that confirms that your initial bootloader is trashed and the CPU has gone into USB recovery mode because it couldn't load the bootloader. The only fix currently is to get Samsung to reflash it, or get someone with a Riffbox or other JTAG equipment to fix it. Heating the phone will not help you, neither will reinstalling Samsung phone USB drivers.
yaro014 said:
hmm i cannot see any hole on the right side of the camera.. there is only connector looks like gps antenna.
i tried on 3 different batteries and i tried to take battery out for few minutes and still not work..
Click to expand...
Click to collapse
Well mate; if we are talking about the usual samsung galaxy s , when we open the lid there definitely is that small gutter with a hole in it . That little diaphragm can be pressed by a blunt pin.
Your provider should fix the phone no problem.
Sent from i9000m on cm7, with xda premium.
Try JIG it help me.
At marktplaats ( EBAY??) you can buy an usb device to help you it works great.
Search te forum "Samsung i9000 galaxy S micro USB download mode Jig"
http://forum.xda-developers.com/showthread.php?t=819551
http://cell-phones.shop.ebay.com/Ce...SB+JIG&_catref=1&_fln=1&_trksid=p3286.c0.m282
hi my phone stop working at all
not responding to any caps like volume up and down with power and home nothing at all
when i plug it to the charger it show white battery but not moving
any idea how to fix it
i cant connect the phone to download mode so i can use odin to install fresh software
i do all what i know i cant even make it login to recovery mode
is this what they call it breakdown ? and is there a way to fix it ?
any help thanks all
seen_bawl said:
hi my phone stop working at all
not responding to any caps like volume up and down with power and home nothing at all
when i plug it to the charger it show white battery but not moving
any idea how to fix it
i cant connect the phone to download mode so i can use odin to install fresh software
i do all what i know i cant even make it login to recovery mode
is this what they call it breakdown ? and is there a way to fix it ?
any help thanks all
Click to expand...
Click to collapse
Can you please enlighten us on WHAT you did to mess up your device??
If you cannot boot into download mode or recovery you will have to either arrange for a Usb Jig or make one (Google for that its easy) a Jig forces the phone into download mode.. Else service centr is your friend
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
completely dead means stuck at boot or no sign of any powering on?
first thing I would try is a JIG, force it into download mode and see if u can flash the original firmware
for firmware download, I recommend sammobile.com. They also have guides showing how to do so If you are uncertain or new to this
If u dont own a JIG and not willing to wait for one to be shipped, u can build it your own. it is pretty simple, just couple of resistors and a micro usb port
oh, and dont be shy about what you have done. Provide the essential details always for better assistance
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
Will your computer recognize it? If you connect it to your computer with the USB cable I mean. If it only makes 3 beeping noises (the computer) and doesn't recognize it, and the phone doesn't turn on at all you will need either a JIG service or a JTAG service (most likely JTAG)
Thank you 4 ur help
I will make my own Jig but can you please help with a guide 4 how to use the Jig to force flash new rom?
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
GZ0ne05 said:
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
Click to expand...
Click to collapse
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
erljayp said:
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
Click to expand...
Click to collapse
So now I really am screwed. Can you tell me how to fix the USB port, and if it damages the phone in any way?
JIG
Maybe you should try USB JIG http://usbjig.com/
How do you charge your battery?
There must be some way to use your SD card to flash something from it.
Verny if his USB is not working then how he could use the jig.
Sent from my GT-N7100
Oh, sorry, my english isn´t very well... My mistake
Here you go my friend, shouldn't be hard or expensive to find a replacement board.
http://www.ifixit.com/Guide/Samsung+Galaxy+Note+II+USB+Board+Replacement/16413
Does anyone know of any way to retrieve the phone ... just call prices Samguns J6 after that is in a black of her ... does not go into download mode .... JIG USB tb not work..
Firmware J600GTVJU5BSF3