[Q] Linux on GT-i5510 - Samsung Galaxy 551 Callisto

GT-I5510 have MHz CPU and 283MB ram.
i am trying debian on it.
debian is on sd card and using vnc method.
if anyone need information how to run debian on this phone i am here for help.
as i mentioned ram is only 283MB so i created a swap file on sd card but when i try to active swap it say function not implement.
so there is no swap support in kernel?
Model: GT-I5510
Android: 2.2
Baseband: i5510xwjk3
kernel version: 2.6.32.9-pref
Build: FROYO.BUJk6
My questions are:
1. how i can enable swap support for this phone?
2. how i can overlock CPU if possible?
anyone can help?
thanks.

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

anything new here?
asghi said:
GT-I5510 have MHz CPU and 283MB ram.
i am trying debian on it
[...]
My questions are:
1. how i can enable swap support for this phone?
2. how i can overlock CPU if possible?
anyone can help?
thanks.
Click to expand...
Click to collapse
Did you receive any response to this issue so far?

i5510 said:
Did you receive any response to this issue so far?
Click to expand...
Click to collapse
no , there is no respone.

Related

[Q]help - overclock - wifi doesnt work

Hi,
I have rooted my DHD with the [ROM] Android Revolution HD 3.1
http://forum.xda-developers.com/showthread.php?t=840040
Click to expand...
Click to collapse
It works fine.
Then, experimentally I try to overclock my DHD with the instruction from this website:
http://hemorrdroids.net/overclock-undervolt-your-desire-hd/
Click to expand...
Click to collapse
My DHD can be overclocked max. to 1,228 Ghz, but the wifi doesn't work
even after step 21 (and also factory reset), what should I do now?
Have I bricked my DHD (wifi)?
Thanx in advance.
Bricking your DHD is something else...
Ok...wifi works when you do not overclock? Have you tried to reboot your DHD and see if that helps? Or, did you try alternate programs to OC your cpu?
Posting this in two separate sections is not good. I have answered your question in the other section.
sphuyal said:
Bricking your DHD is something else...
Ok...wifi works when you do not overclock? Have you tried to reboot your DHD and see if that helps? Or, did you try alternate programs to OC your cpu?
Click to expand...
Click to collapse
Yes, it works fine, when I don't overclock it. Even after I installed the [ROM] Android Revolution HD 3.1.
andyharney said:
Posting this in two separate sections is not good. I have answered your question in the other section.
Click to expand...
Click to collapse
Sorry, I'm just too panic about what I've done.

Need Help! How to Open SWAP?

I Know G1 can have some kernel to support SWAP Partition. To our Desire, for large games, ram runs out.
I have looked for a Desire kernel to get SWAP, plz Help...
Get the sources of the kernel & compile it whit swap support.
But believe, you don't need it for Desire.
Klausgao said:
I Know G1 can have some kernel to support SWAP Partition. To our Desire, for large games, ram runs out.
I have looked for a Desire kernel to get SWAP, plz Help...
Click to expand...
Click to collapse
http://thalamus.ineige.org/kernels/2.6.35/custom/
mpqo said:
http://thalamus.ineige.org/kernels/2.6.35/custom/
Click to expand...
Click to collapse
wonderful, thx guy. is it made by yourself? and can i have wifi-n patch... really big thanks!
up up for help

[Q] App2SD Kernel for stock note 2

Does any developer know of a way to substitute the stock kernel in a note 2 with one that allows the app2sd init,d script.
my note 2 is rooted and has CWM but other than that no other changes. i am a very heavy user of apps due to the field that i work in, and 16gb internal mem is not good enough, i have a 64gb class 10 sd card fully working, but very underused.
as per the below threads
http://forum.xda-developers.com/showthread.php?t=1883125
http://forum.xda-developers.com/showthread.php?t=1888986
http://forum.xda-developers.com/showthread.php?t=1073000
http://forum.xda-developers.com/showthread.php?t=1857391
many thanks in advance to anyone that can help.
regards pj
http://forum.xda-developers.com/showthread.php?t=1772234
this is the main forum i saw the hack from
I would like the answer for this one too.
So, anyone knows how to implement the init.d on rooted stock kernel/rom with CWM recovery?
airbusecam said:
Does any developer know of a way to substitute the stock kernel in a note 2 with one that allows the app2sd init,d script.
my note 2 is rooted and has CWM but other than that no other changes. i am a very heavy user of apps due to the field that i work in, and 16gb internal mem is not good enough, i have a 64gb class 10 sd card fully working, but very underused.
as per the below threads
http://forum.xda-developers.com/showthread.php?t=1883125
http://forum.xda-developers.com/showthread.php?t=1888986
http://forum.xda-developers.com/showthread.php?t=1073000
http://forum.xda-developers.com/showthread.php?t=1857391
many thanks in advance to anyone that can help.
regards pj
Click to expand...
Click to collapse
I also prefer this way, tested and worked :good::laugh:
airbusecam said:
http://forum.xda-developers.com/showthread.php?t=1772234
this is the main forum i saw the hack from
Click to expand...
Click to collapse

[Q&A] [KERNEL] Next |Ep7.8 / 7.9| |Ep8.5| |Ep10.4| |Sense / AOSP|

Q&A for [KERNEL] Next |Ep7.8 / 7.9| |Ep8.5| |Ep10.4| |Sense / AOSP|
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] Next |Ep7.8 / 7.9| |Ep8.5| |Ep10.4| |Sense / AOSP|. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GPU OC
Hi I`m using Next EP 7.8 OC. Can i overclock GPU up tp 600 mhz?
kerim.ellezov said:
Hi I`m using Next EP 7.8 OC. Can i overclock GPU up tp 600 mhz?
Click to expand...
Click to collapse
Yes but not recommended.. Not very stable
Hey, I'm using MIUI 4.12.5 Android 4.4.4 based on CM. Is it ok if I flash Next kernel, and should I repack it or smth like this? Or just download and flash?
And which one should I dl for best battery life ? And what the differens between OC and not OC?
Pavel M said:
Hey, I'm using MIUI 4.12.5 Android 4.4.4 based on CM. Is it ok if I flash Next kernel, and should I repack it or smth like this? Or just download and flash?
And which one should I dl for best battery life ? And what the differens between OC and not OC?
Click to expand...
Click to collapse
To be safe... Repack.. Non OC.. OC mostly for games
SlowMotion Fix
Bro i`m using EP 7.9 CpuQuiet version but it seems slow motion not working. But it's working perfect in IntelliPlug 10.5
Pls fix it next CpuQuiet release
Yes bro i need too LP version audiahadi pls make this compatible
might try it tomorrow
hey smeejaytee, ive had Resurrection_remix_LP_v5.2.9 (lollipop) for a few days now and im thinking of checking this out.
I'll post my results tomorrow.
edit....
tried and failed lol
Stuck at bootlogo after flashing nextcpu kernel
I flashed the kernel as per the instructions. But after flashing it, the phone got stuck in airplane mode, tried flashing stock kernel and then the phone wont even boot up. even Nandroid backup is not working!! Help please... I need to pull out my data out of the storage but the cwm 'mount usb storage' is not working, as well as philz. Tried flashing twrp, but the touch is not working. I am totally trapped out please help. The hboot got upgraded from 1.36 to 1.72 maybe thats the culprit.
HELP ME PLEASE!!!
device is s-on
n4b33l said:
I flashed the kernel as per the instructions. But after flashing it, the phone got stuck in airplane mode, tried flashing stock kernel and then the phone wont even boot up. even Nandroid backup is not working!! Help please... I need to pull out my data out of the storage but the cwm 'mount usb storage' is not working, as well as philz. Tried flashing twrp, but the touch is not working. I am totally trapped out please help. The hboot got upgraded from 1.36 to 1.72 maybe thats the culprit.
HELP ME PLEASE!!!
device is s-on
Click to expand...
Click to collapse
Took this in Q&A section.. There maybe someone can help.. Rarely happen.. But already have some other user had similar problem
audahadi said:
Took this in Q&A section.. There maybe someone can help.. Rarely happen.. But already have some other user had similar problem
Click to expand...
Click to collapse
I found the fix !!
I had a nandroid backup stored in my pc (made 3 months ago). I extracted the boot.img and flashed it via fastboot and then cleared the cache.
Thanx anyway
Sorry for the super noob question but I'm just helping a friend. Can this be flashed on aicp ol directly? Can't understand what is going on with the repacks etc with this phone.
arvylas said:
Sorry for the super noob question but I'm just helping a friend. Can this be flashed on aicp ol directly? Can't understand what is going on with the repacks etc with this phone.
Click to expand...
Click to collapse
Not compatible with lollipop I guess.. No device anymore. Repack needed because of ramdisk. Init file needed to boot up phone
~ no signature needed ~

[Q] Kernel with binfmt_misc_kernel and 3G/1G vm split

Hello All,
My goal is to run a windows x86 executable on my Sony Z1. As far as I know I need a kernel with support for binfmt_misc_kernel module and 3G/1G vm split. Then it would be possible to run wine under qemu user mode or exagear on near native speed.
Since I'm a rookie (not even!) in kernel development or compiling I'd like to ask you if you know a way to help me? Anybody knows of any available rom compiled with those options? Or how would I find this out? As far as I can tell the CM11 does not run exagear because of the lacking binfmt_misc_kernel module...
Link to the exagear tool: http://eltechs.com/product/exagear-desktop/
Or maybe you can tell if it can be done at all / is it 'doable'?
Thank you in advance and greetings from Amsterdam, the Netherlands
Mike.
Hmm...look interesting....
Pls move to General or F&Q
Sent from my C6903 using XDA Premium 4 mobile app
meliacentrum said:
Pls move to General or F&Q
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Don't know how to do that - only an admin or moderator can I assume?
In general - I wonder if *anyone* got this exagear desktop tool running on their phone?!
mmmanus said:
Hello All,
My goal is to run a windows x86 executable on my Sony Z1. As far as I know I need a kernel with support for binfmt_misc_kernel module and 3G/1G vm split. Then it would be possible to run wine under qemu user mode or exagear on near native speed.
Since I'm a rookie (not even!) in kernel development or compiling I'd like to ask you if you know a way to help me? Anybody knows of any available rom compiled with those options? Or how would I find this out? As far as I can tell the CM11 does not run exagear because of the lacking binfmt_misc_kernel module...
Link to the exagear tool: http://eltechs.com/product/exagear-desktop/
Or maybe you can tell if it can be done at all / is it 'doable'?
Thank you in advance and greetings from Amsterdam, the Netherlands
Mike.
Click to expand...
Click to collapse
Maybe @jerpelea can point a word or two out on this? Ask him - he is with Sony since a couple of months ago and a skilled guy when it comes to advanced Android / Linux hacking.
Sounds interesting.
Ok cool I will PM @jerpelea. A while ago I also asked @DooMLoRD about this, he answered that most kernels already have the 3G/1G vm split options. No word about the binfmt_misc_kernel module though.

Categories

Resources