[Q] Anyone else have their phone freak out when typing a text? - Samsung Galaxy Nexus

I was typing out a text today (normal mode, not landscape) and out of nowhere the screen faded out and went to the lock screen. What was even more peculiar was that I had no option to unlock the phone; when I tried to swipe my finger where the unlock button should be, the screen dimmed and the letters for the time turned blue while the other stuff (signal, battery, etc) disappeared from the screen.
When I hit the home button I was able to get back into the phone, however it faded back to whatever mock lock screen was there before. The second time I hit the home button it let me get back to the text and finish it.
Has anyone else had a similar issue? I've unlocked my bootloader, rooted, and have flashed several different radios (currently on ugkl1, stock was xxkk6).

ChazzMichaelMichaels said:
I was typing out a text today (normal mode, not landscape) and out of nowhere the screen faded out and went to the lock screen. What was even more peculiar was that I had no option to unlock the phone; when I tried to swipe my finger where the unlock button should be, the screen dimmed and the letters for the time turned blue while the other stuff (signal, battery, etc) disappeared from the screen.
When I hit the home button I was able to get back into the phone, however it faded back to whatever mock lock screen was there before. The second time I hit the home button it let me get back to the text and finish it.
Has anyone else had a similar issue? I've unlocked my bootloader, rooted, and have flashed several different radios (currently on ugkl1, stock was xxkk6).
Click to expand...
Click to collapse
I have not had that happen...I am unlocked, rooted, and running a custom rom and kernel. The only thing i did not switch is the radio...So may be what is causing it?

I reset the radio to XXKK6 just for safe measure.
Anyone else seen this issue?

I had weird problems with typing messages in Handcent with weird lag and even force closes on 4.0.2. Have not had these problems on 4.0.4.

So, as it turns out, this problem was cause by my own stupidity...
What was happening as that, in a very small amount of time, my thumb hit the task manager button, and the Clock app was the one that was right under my thumb, which was subsequently selected. For some reason, if you start Clock and try to swipe your finger, the screen dims.
So, total false alarm. Move along, nothing to see here.

Related

TF3D launches at startup but have to tap screen to display home screen.

When I boot up after reset or power off, the homescreen displays top task bar, bottom soft keys, and displays "launching TouchFlo3D..." and then... nothing. The screen stays like this until I tap it, and then it displays the home screen. Anybody else seeing this?
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
I have never got no one to answer a question on here good luck...
PaulusUK said:
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
Click to expand...
Click to collapse
Does touching the screen make it start?
I know that not turning off TF3D before installing some cabs can make it behave oddly- TF3D restarts, fails to launch at boot, etc...
Mine does the same thing except its just a plain screen until I touch it then it says launching tflo
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
acrh2 said:
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
Click to expand...
Click to collapse
It has something to do with the PIN lock code, you're right.. now we just need someone to look into this further who knows how to troubleshoot these issues from the back-end.
Bump for more answers!
-mak
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile

TP2 proximity sensor returns to Home screen instead of Phone screen

So I've got a minor quibble with my new Sprint TP2. A friend and I both bought TP2s (both with Sprint) and we see different behavior with the proximity sensor. When he moves his face away from his phone, it comes back to the phone. It seems to me that should be the default behavior. My phone, however, flashes at the phone screen, then goes to the Home screen. This irritates the hell out of me since I have to hit the Send button to get back to the Phone screen. Normally, that's no biggie, but if I have to get to the keypad, I have to move my face away, wait for it to flash and go to Home, hit the Send button, then press the Keypad button just so I can start to enter my voicemail password. I'm using the stock ROM, and I've only installed Google Apps and Facebook (but this was happening before I installed any apps). Are there any reg hacks to control this behavior?
TIA,
-djb

Need help. Some problems with my slide

Hey guys, i have some problems that i hope somebody can help with. My phone isnt rooted, basically out of the box stock, but ive had it since the day it came out. So shes got some time on her.
It was working perfectly till about a day ago. Then all of a sudden the screen would not stay off for more than a second. I would push the lock button and it would turn off, but the lighted buttons (home, back, etc) would stay lit. Then the screen would turn back on a second later. But i found that if i push the lock button and immediately push it again, the lighted buttons will also turn off and the screen will stay off. If i hold the lock button it will just flash the menu with the options to power off options (airplane mode, silent mode, etc..), but immediately disappear. But if i hold the lock button till just before that menu would pop up, it wont always disappear.
Also sometimes when i try to open any app it will close automatically, popping up with a recent apps menu that ive never actually seen before. I can push back and the menu will go away and i can try to open the app again. Usually successful the second time.
And last my battery life has gone down the drain. It went from fully charged to empty in about 7 hours. It used to last much longer. The screen might be on in my pocked, so that could be the problem, but i try to check it often to see if its on.
Just hoping that someone will know if this is a hardware or software problem. The phone was perfect in the morning, and a few hours later the problems started.
I have android version 2.2.1, froyo i believe.
Any help will be really appreciated. Sorry for the long post, just trying to be specific.

[Q] Lock Screen Problem [SOLVED]

Hi,
I have a problem with my lock screen. If I lock my GS using the power button, the slide to lock screen comes up upon pressing the power button again.. fine no problem there.
But, if I let the screen timeout and the press the power button to bring the phone outta standby. There is no lock screen. I am brought straight to the home screen.
I cannot see, or have never come across and option to enable this. I had a look around the Q&A GS forms also. Anyone have any ideas?
(hope it's not something ridiculously simple I've missed)
what is selected in automatically lock? if there is for example 1 minute, and you turn your device in this minute on then there is no lockscreen, but after this minute the lockscreen is back
Ok I've played around with security settings and tried to find the "automatically lock" option. I seems this was not visible until I selected "pattern Unlock".
I set it to 30min at some stage and seem to have forgot about it.
When I set it back to "Immediately", the problem was solved.
Thanks for the reply, gave me a push in the direction I needed to go in.

Problem with notification bar pullong down randomly

Hey there
Had the phone since release
Started with this problem yesterday. It's random, the notification bar pulls down and pulls back up within a second. Sometimes it doesn't release, I have to press power button to enable me to use the phone.
I switched on "show taps" in developer options, and it appears to be a screen press from the top centre of the phone. Only from there.
I've tried replacing the screen protector, tried cleaning the phone, power cycles... I've not tried a factory reset at this point, would need to back everything up.
On 8.1
I'm at my wits end
Thanks in advance
Do you have a case installed? Sometimes phone cases trigger phantom touches on the display.
I do, since day one.
Took it off and still get same problem
I'd use a screen capture app to show the phantom touches that's keeping you from releasing the notification bar and contact Support at this point. But yeah, you should begin backing up your data.
try to use the developer menu -> show touches and see if it's software or hardware related
....actually i have been getting random, backspaces key presses.....i am typing away, and than I will sense the "phantom" key press the backspace, and look as my message get completely deleted. Never happened before, same case/same screen protector from DAY1....I just restart my phone, but still wear. happened twice since OREO update
Boot into safe mode and then turn off and start up.
Fixed my menu bar issues.

Categories

Resources