Boot stuck after flashing DoomKernel v05 / Se TWeaked 1.0 - Xperia Arc Q&A, Help & Troubleshooting

Hello everyone.
Annoyed from CM7´s eating my battery i was happy to see the release of SE TWEAKED 1.0.
I just flashed my Arc to doomkernel v05 http://forum.xda-developers.com/showthread.php?p=20335549#post20335549 and Se Tweaked 1.0 http://forum.xda-developers.com/showthread.php?t=1278758 , CWM works fine, also it says "Installation complete", but after reboot doomkernel logo goes away, and screen goes black with backlight.
So i thought it will take some time "give the rom some time to boot up after the logo goes away".
But the phone stuck in that order for hours.
-redownloaded rom and new install
-another sd card and new install
dont fixed it at all.
cwm log :
cwm-based recovery v5027 full
ro.media.enc.hprof.vid.bps=8000000
ro.lge.proximity.delay=25
ro.HOME_APP_ADJ=1
persist.radio.net_pref_0=1
persist.chargemon.active=1
persist.nvreset.notfirstboot=1
persist.radio.adb_log_on=0
persist.radio.sma_voice_3gpp=0
persist.usb.eng=0
Checking for extendedcommand
Skipped
Click to expand...
Click to collapse
If anyone has an idea how i can fix that, i would be happy
regards

You picked up the wrong kernel.[ ics 4... kernel ]
Try this one.....
http://j.mp/arc_dk_18-f1-modcwm5_h

Ah well its still doing the same -.-

Try the stock kernel... And then go back to doomkernel... Mine did not flash the new doomkernel over the old one when i went from freexperia to Xperia mod.. Which is great btw
So try a totally different kernel and then flash doomkernel again
Sent from my LT18i using XDA App

I tried that, the stock bootet, i flashed back to the ics lower, installed se tweaked - nothing.

Do not use a ics kernel ,it will not work.

jejeh said:
Do not use a ics kernel ,it will not work.
Click to expand...
Click to collapse
I used the one u posted ...

Sounds weird... What does your fastboot say when you flash?
Sent from my LT18i using XDA App

Good morning everyone,
fastboot works great without any errors, but for now i went to XperiaMod6 and the v19 doomkernel, which now runs great with the 36 baseband.
i may try it when i get my arc S in the next days

Hope you like it have a good weekend :-D
Sent from my LT18i using XDA App

mongocliqque said:
Annoyed from CM7´s eating my battery i was happy to see the release of SE TWEAKED 1.0.
I just flashed my Arc to doomkernel v05 http://forum.xda-developers.com/showthread.php?p=20335549#post20335549 and Se Tweaked 1.0 http://forum.xda-developers.com/showthread.php?t=1278758
Click to expand...
Click to collapse
I think you flashed SE TWEAKED directly on CM7.
You must first switch back to the stock rom i.e, .42 firmware.
Try flashing .42 firmware and then flash the DooMKernel followed by SE TWEAKED.

Related

Cyanogen removal

Hi guys,im a noob to android,i rooted my arc s,unlocked bootloader and installed cyanogen mod 7.
Thing is i dont like it -.-"
How to go back to original arc s rom?
with the root if possible or without
btw i have cwm thanks
Wolfarm141 said:
Hi guys,im a noob to android,i rooted my arc s,unlocked bootloader and installed cyanogen mod 7.
Thing is i dont like it -.-"
How to go back to original arc s rom?
with the root if possible or without
btw i have cwm thanks
Click to expand...
Click to collapse
You can just use the FlashTools to flash a stock firmware (FTF file).
Bazoocaze said:
You can just use the FlashTools to flash a stock firmware (FTF file).
Click to expand...
Click to collapse
As in downoload a stock ics rom,plug the phone in flashboot mode and flash it?
Yup. After flashing, you would lose root. To get it back, just flash the superuser binary using recovery from a custom kernel.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2
xtacy! said:
Yup. After flashing, you would lose root. To get it back, just flash the superuser binary using recovery from a custom kernel.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2
Click to expand...
Click to collapse
Thanks guys very much!!In these days i didn't understand cyanogen much,didiìn't know what was a kernel but now i upgraded to CM9 and it is fantastic!!
Thanks foe the help!!
Oh btw on settings,performance i overclock the cpu to about 1200 something but then it goes back to default????
No idea hy but i sure do love the new CM,looking forward to CM10,credit to FXP team too!!!
Wolfarm141 said:
Thanks guys very much!!In these days i didn't understand cyanogen much,didiìn't know what was a kernel but now i upgraded to CM9 and it is fantastic!!
Thanks foe the help!!
Oh btw on settings,performance i overclock the cpu to about 1200 something but then it goes back to default????
No idea hy but i sure do love the new CM,looking forward to CM10,credit to FXP team too!!!
Click to expand...
Click to collapse
I think you have to select "Set on boot". If it doesn't work you can try downloading no-frills CPU control or setcpu and set it there (that's what I did).

[Q] Sony Xperia S reboot problem

i have sony xperia s , android 4.0.4 stock biuld 6.1.A.2.55 , rooted unlocked boot loader , i need to ask that when every time i reboot my phone it will take a very long time , every single reboot i will get android is upgrading and it will begin optimizing system apps and user apps around 160 apps , it is so annoying , it is like when you change the kernel but it happens when i reboot my phone, please i need a solution
You flashed acid mod?
Sent from my Jellybean Xperia S
Ben36 said:
You flashed acid mod?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
yes , does it have a problem ?
Yup has for like... Ever! If you're on ICS do a fresh install of your rom and flash the older incrediblebass3.1 as that was perfect, its been rubbish ever since
Incrediblebass3.1 -
http://www.sendspace.com/file/rp8yj0
Click the blue box that says download from send space as the rest are advertising
Sent from my Jellybean Xperia S
Ben36 said:
Yup has for like... Ever! If you're on ICS do a fresh install of your rom and flash the older incrediblebass3.1 as that was perfect, its been rubbish ever since
Incrediblebass3.1 -
http://www.sendspace.com/file/rp8yj0
Click the blue box that says download from send space as the rest are advertising
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
hey thanks man , hey what jelly bean you have on your xperia s ?
The PAC rom. It's the best to have on your phone!
Sent from my Jellybean Xperia S
Ben36 said:
The PAC rom. It's the best to have on your phone!
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
Is it better then CM10?
Ben36 said:
The PAC rom. It's the best to have on your phone!
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
thanks i thought it wasn't stable but if you said that it is the best one , i'm going to download it now , and by the way the problem solved thanks ,
I experienced some random reboots after flashing AC!D on P.A.C rom.
On the other side, no problems with FXP146.
Conclusion, sony mods hardly work on custom rom, stay locked!
AC!D 5.0 is working like a charm on stock .45
zhuhang said:
Conclusion, sony mods hardly work on custom rom, stay locked!
AC!D 5.0 is working like a charm on stock .45
Click to expand...
Click to collapse
i got this issue too after i flashed ac!d v7...i didnt have it when i had v5, so i went back to my backup that had v5 but the issue was still there..not a problem though, just a bit confusing sometimes..and i'm using stock .45 fw

[Q] {Q} Problem after installing Zelly Cream Rom !!

Hello all ,,
I tried to install the zelly cream rom on my xperia arc device ( http://forum.xda-developers.com/showthread.php?t=2151648 )
I did every single step (flashed stock .587 ftf , used DoomKernal)
But after installing the rom , the phone doing restart continuously ..
Please Any Buddy Can Help ??​
mohamad1992 said:
Hello all ,,
I tried to install the zelly cream rom on my xperia arc device ( http://forum.xda-developers.com/showthread.php?t=2151648 )
I did every single step (flashed stock .587 ftf , used DoomKernal)
But after installing the rom , the phone doing restart continuously ..
Please Any Buddy Can Help ??​
Click to expand...
Click to collapse
Flash vengeance or Lupus kernel!
Sent from my LT18i using Tapatalk 2
FAdrums said:
Flash vengeance or Lupus kernel!
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
i tried now to flash lupus kernal but its not working for me ( it shows the lups kernal logo and the phone turn off after that )
can you give me a link for vengeance kernal !!
mohamad1992 said:
i tried now to flash lupus kernal but its not working for me ( it shows the lups kernal logo and the phone turn off after that )
can you give me a link for vengeance kernal !!
Click to expand...
Click to collapse
What do you mean with "the phone turn off after that"?
Do you get the light to boot on cwm? If not, do a fresh install
Here's the vengeance kernel
http://forum.xda-developers.com/showthread.php?t=2097138
mohamad1992 said:
i tried now to flash lupus kernal but its not working for me ( it shows the lups kernal logo and the phone turn off after that )
can you give me a link for vengeance kernal !!
Click to expand...
Click to collapse
Just flash back to stock then root and install CWM via x-parts and flash this custom rom.
Also its called kernEl not "kernAl"
Oh and If you are so lazy that you cant google "vengeance kernel" for yourself then you don't deserve any help.
mohamad1992 said:
i tried now to flash lupus kernal but its not working for me ( it shows the lups kernal logo and the phone turn off after that )
can you give me a link for vengeance kernal !!
Click to expand...
Click to collapse
Also lupus kernel to get into recovery wait for it to vibrate /blue light and then keep pressing back button not volume down some kernel/recoveries are accessed in different way's. :good:
pypcier said:
Just flash back to stock then root and install CWM via x-parts and flash this custom rom.
Also its called kernEl not "kernAl"
Oh and If you are so lazy that you cant google "vengeance kernel" for yourself then you don't deserve any help.
Click to expand...
Click to collapse
I Did it many times ....
and i have bad english i know that
and i searched for "vengeance kernel" on google before i asked for a link ... But i cant find it.
THANK YOU !!
[/QUOTE] Also lupus kernel to get into recovery wait for it to vibrate /blue light and then keep pressing back button not volume down some kernel/recoveries are accessed in different way's. [/QUOTE]
Thank you bro its working fine now :good:
Its literally the first result... it looks like we are using a different google.
after zellycream installation got stuck in sony screen
after installing zellycream rom my phone (xperia ray) got stuck in sony screen... help me plz..
Carefully follow the steps , zelly cream is THE BEST ROM and you may not be using recommended kernel
mohamad1992 said:
i tried now to flash lupus kernal but its not working for me ( it shows the lups kernal logo and the phone turn off after that )
can you give me a link for vengeance kernal !!
Click to expand...
Click to collapse
work smooth with vengeance kernel, amazing rom!!
rod555 said:
work smooth with vengeance kernel, amazing rom!!
Click to expand...
Click to collapse
I had the same problem as above but, mine scale through sony logo and after sony logo disappears, the screen fade and it restart all over again, coming from xperia ultimate hd from jader, with locked bootloader. I do always wipe everything. What am I really missing? And pls I always loose CWM while am trying to install any custom rom, then I have to go back to stock, then root and start all over again. What is it am wiping/formatting/cleraring etc. That make me loose CWM
PRESS my THANK button if I helped with these post
gaslaw said:
I had the same problem as above but, mine scale through sony logo and after sony logo disappears, the screen fade and it restart all over again, coming from xperia ultimate hd from jader, with locked bootloader. I do always wipe everything. What am I really missing? And pls I always loose CWM while am trying to install any custom rom, then I have to go back to stock, then root and start all over again. What is it am wiping/formatting/cleraring etc. That make me loose CWM
PRESS my THANK button if I helped with these post
Click to expand...
Click to collapse
If I got it right, you lose your CWM because you have your bootloader locked, and therefore stock kernel, most custom kernels have a CWM included and you keep it as long as you keep the kernel, even after wiping.
mohamad1992 said:
Hello all ,,
I tried to install the zelly cream rom on my xperia arc device ( http://forum.xda-developers.com/showthread.php?t=2151648 )
I did every single step (flashed stock .587 ftf , used DoomKernal)
But after installing the rom , the phone doing restart continuously ..
Please Any Buddy Can Help ??​
Click to expand...
Click to collapse
I tested kernels for Arc and the best 1 is Rush kernel (link is in ZC thread) don't use xparts etc use flashtool! Xparts etc just screw with Rom kernel! Seriously people read the WHOLE instructions and recommended kernels list! All recommended kernel links are in thread! Read people, read!
Janoee said:
If I got it right, you lose your CWM because you have your bootloader locked, and therefore stock kernel, most custom kernels have a CWM included and you keep it as long as you keep the kernel, even after wiping.
Click to expand...
Click to collapse
you surgest i unlock my bootloader? But i dont want to loose DRM%-).
R: [Q] {Q} Problem after installing Zelly Cream Rom !!
I have Xperia Arc S Lt18i with locked bootloader and I haven't Andy problem installing this rom, using X-parts. I suggest you to start form stock rom and then follow all the instruction step-by-step, I'm sure it will works
Inviato dal mio LT18i con Tapatalk 2
Version
MatteoM89 said:
I have Xperia Arc S Lt18i with locked bootloader and I haven't Andy problem installing this rom, using X-parts. I suggest you to start form stock rom and then follow all the instruction step-by-step, I'm sure it will works
Inviato dal mio LT18i con Tapatalk 2
Click to expand...
Click to collapse
May I know the version you installed on your device? I use doomlord's method to root my phone x-part never download CWM to my phone, I use other method to install CWM, of which I used to install other custom rom like xperia ultimate hd successfully. I think I should be able to install other rom as well... Anybody wanna PM me how he/she did it with locked bootloader? Thanks
Please Help Me!!!!!!!!!!!!!!!
pragadeesh said:
after installing zellycream rom my phone (xperia ray) got stuck in sony screen... help me plz..
Click to expand...
Click to collapse
Guys am a lover of this ROM but now i cannot install the latest update v3.0 on my wt19i. after i install this rom my phone got stuck at the sony screen itself.........
Please give me a good way to install it...
am dying to use it!!!!!!!!!1
+1
any one help us plz??
i read instruction and applied all point for Locked BL but still my xperia arc reboot with sony logo :crying:
moodmoody said:
+1
any one help us plz??
i read instruction and applied all point for Locked BL but still my xperia arc reboot with sony logo :crying:
Click to expand...
Click to collapse
When you got bricked like that, instaling firmware with flashtool, flashmode, with Generic Global Firmware, In Index, (link below)
I think zelly cream is fusion about ics and jb right..
Use recomended kernel from ROM thread.:good::good:
Click here for index: Click Me
I cant installing kernel with flashtool, when i installing with flashtool my pc got bluescreen and restarting, so i choose intalling kernel with cmd,
here the link: Click Me Again
Regards.
_______________________________________________________________________________________________________________________
Device' : Xperia Arc
ROM : ★ Xperia Z Jelly Bean v3 ★
Kernel :

Screen problem only lupus v13 works

I've been trying to switch from jellybean back to GB. But every time I flash another kernel no matter which one I get a blank screen with only the backlight when I turn on the phone. Not even the kernel image or boot animation show up just a backlight. I've tried every kernel I could possibly find as well as flashing stock ft for my r800x. The only kernel that works with the screen is lupus jb v13. The weird thing is lupus v8 doesn't eben work nor turbo kernel. Lupus jb v13 is the only one that does. I wsd thinking it was a hardware problem but not sure because lupus jb v13 works fine except for when I slide open game pad I have to shut screen off and on for image to show up. Its been like this for a couple days and I finally decided I need help . So if you have any suggestions please help me. Thank you for reading my really long desperate plead for help
Sent from my Xperia Play (r800x)
abdel12345 said:
I've been trying to switch from jellybean back to GB. But every time I flash another kernel no matter which one I get a blank screen with only the backlight when I turn on the phone. Not even the kernel image or boot animation show up just a backlight. I've tried every kernel I could possibly find as well as flashing stock ft for my r800x. The only kernel that works with the screen is lupus jb v13. The weird thing is lupus v8 doesn't eben work nor turbo kernel. Lupus jb v13 is the only one that does. I wsd thinking it was a hardware problem but not sure because lupus jb v13 works fine except for when I slide open game pad I have to shut screen off and on for image to show up. Its been like this for a couple days and I finally decided I need help . So if you have any suggestions please help me. Thank you for reading my really long desperate plead for help
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
Just an idea, is it any command in build.prop to disable autobrightness? So you can change rom before flashing.
Or if you know how to blindly flash a rom (positions in cwr, name folder on sd card "AAA" so it can be first in the list).
Or maybe program on pc that can take screenshots so you can somehow disable autobrightness...
But it's probably hardware fault...
Sent from my R800i using xda app-developers app
Bakisha said:
Just an idea, is it any command in build.prop to disable autobrightness? So you can change rom before flashing.
Or if you know how to blindly flash a rom (positions in cwr, name folder on sd card "AAA" so it can be first in the list).
Or maybe program on pc that can take screenshots so you can somehow disable autobrightness...
But it's probably hardware fault...
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Well its not auto brightness because that only activates in ROM not kernel
Sent from my Xperia Play (r800x)
Anybody have an idea? I tried GB and ICS again and I got the same result a barely readable screen. If its a hardware problem what does it sound like? Flex cable maybe? I'm still confused on why it works with lupus job v13
Sent from my Xperia Play (r800x)
abdel12345 said:
Anybody have an idea? I tried GB and ICS again and I got the same result a barely readable screen. If its a hardware problem what does it sound like? Flex cable maybe? I'm still confused on why it works with lupus job v13
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
Did Wedgess released any versions between v8 and v13?
In he's changelog, in v9, there is an "Undervolt LCD display" feature. Maybe, but not nececcery, a thing that is lighting up your display...
What other kernels did you tried? All of them? All versions?
Bakisha said:
Did Wedgess released any versions between v8 and v13?
In he's changelog, in v9, there is an "Undervolt LCD display" feature. Maybe, but not nececcery, a thing that is lighting up your display...
What other kernels did you tried? All of them? All versions?
Click to expand...
Click to collapse
I tried doomkernel v14, lupus v12 gb, turbo kernel, stock, full stock ftf. I'll try lupus v9 to v12 jellybean and see if they work. If they do then that might be the problem. Thanks for a suggestion I'm dying to get this fixed because my play is basically useless on jellybean
Sent from my Xperia Play (r800x)
abdel12345 said:
I tried doomkernel v14, lupus v12 gb, turbo kernel, stock, full stock ftf. I'll try lupus v9 to v12 jellybean and see if they work. If they do then that might be the problem. Thanks for a suggestion I'm dying to get this fixed because my play is basically useless on jellybean
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
I can pack and upload all kernels i have for you to test.
Did you tried CM kernels (besides doomlords, lupus and turbo kernels)?
I'm curious too why it works only on jb13.
Sent from my R800i using xda app-developers app
Bakisha said:
I can pack and upload all kernels i have for you to test.
Did you tried CM kernels (besides doomlords, lupus and turbo kernels)?
I'm curious too why it works only on jb13.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Actually no I haven't thought to try cm kernels I'll try it later and tell you. If you have any of lupus kernels between 9 and 12 that'd be great if you could upload them.
Sent from my Xperia Play (r800x)
abdel12345 said:
Actually no I haven't thought to try cm kernels I'll try it later and tell you. If you have any of lupus kernels between 9 and 12 that'd be great if you could upload them.
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
i have only Lupus V12 (other then v13 and v8), i wasn't following it much, coz i'm mostly on ics roms...
As i recall, muiu have their own kernels too.
If wedgess only know what he changed in v13 (or less versions), it would be more helpfull for you
Bakisha said:
i have only Lupus V12 (other then v13 and v8), i wasn't following it much, coz i'm mostly on ics roms...
As i recall, muiu have their own kernels too.
If wedgess only know what he changed in v13 (or less versions), it would be more helpfull for you
Click to expand...
Click to collapse
OK I'll try miui as well as cm kernels later. Right now I'm not home so I can't but I'll try later
Sent from my Xperia Play (r800x)
OK I tried lupus v10 to v13 minus v11 and they all worked. I haven't tried cm10 kernels yet. But this makes it look as if its some thing he changed in the newer versions. If only I could do the same thing in other kernels then they might work but wedgess doesn't have any time so I'm kinda stuck
Sent from my Xperia Play (r800x)
abdel12345 said:
OK I tried lupus v10 to v13 minus v11 and they all worked. I haven't tried cm10 kernels yet. But this makes it look as if its some thing he changed in the newer versions. If only I could do the same thing in other kernels then they might work but wedgess doesn't have any time so I'm kinda stuck
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
Yeah, i saw your post in kernels thread.
I found link of how build kernel at http://forum.xda-developers.com/showthread.php?t=2149508
I wanted to learn to build kernel from source, but unfortunately all my attempts to setup linux on virtual machine has failed (and linux is needed to build kernel from source).
I understand your frustration, since all jb roms have touchpad lag, and kinda kill the purpose of having Xperia play.
Sent from my R800i using xda app-developers app
Bakisha said:
Yeah, i saw your post in kernels thread.
I found link of how build kernel at http://forum.xda-developers.com/showthread.php?t=2149508
I wanted to learn to build kernel from source, but unfortunately all my attempts to setup linux on virtual machine has failed (and linux is needed to build kernel from source).
I understand your frustration, since all jb roms have touchpad lag, and kinda kill the purpose of having Xperia play.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thanks man I'll try to set it up tonight and see what I can do
Sent from my Xperia Play (r800x)
well i just tested fxps cm10 kernel and it worked now i can narrow down the problem since it has to be something they both share
abdel12345 said:
well i just tested fxps cm10 kernel and it worked now i can narrow down the problem since it has to be something they both share
Click to expand...
Click to collapse
And cm7 or cm9 kernel? So you can have gb or ics working on your phone.
I'll try again today or tommorow to set up virtual machine. It's not that i don't know how, but since i changed cpu on PC, i couldn't install any, nor windows, nor linux.
Sent from my R800i using xda app-developers app
Yesssssssssssssssss I have finally got it working after a whole week. After flashing cm10 kernel i decided to try lupus jb v8 again and it worked. Then i tried lupus v12 gb and it worked. I think the cm kernel fixed whatever the problem was :victory: yeaaaaaahhhhhhhhhhhhhhhh (as you can see im really happy) now im going to do some flashing thanks for your help and suggestions. I would have never fixed it if you didnt tell me to try fxp kernels
abdel12345 said:
Yesssssssssssssssss I have finally got it working after a whole week. After flashing cm10 kernel i decided to try lupus jb v8 again and it worked. Then i tried lupus v12 gb and it worked. I think the cm kernel fixed whatever the problem was :victory: yeaaaaaahhhhhhhhhhhhhhhh (as you can see im really happy) now im going to do some flashing thanks for your help and suggestions. I would have never fixed it if you didnt tell me to try fxp kernels
Click to expand...
Click to collapse
I'm glad i helped
Sent from my R800i using xda app-developers app
Ahhhhhhhhkhkhk it messed up again :crying:. I shut my phone off and when i turned it on it had the same problem. I tried flashing cm10 kernel and it works but now the other kernels still dont work. I know what the problem is though its the backlight. Because i flashed lupus jb v8 and a rom aand it worked but you can barely see the screen. So i think its because the backlight wont turn on. On fxp cm10 and lupus lupus jb13 it works by itself though. Ahhhhh this is so frustrating. I was just about to test dixperia 3 too and now i cant. For now im going to go back to jellybean but i really wanna get this fixed but im starting to get conviced its a hardware problem. I think ill take my phone apart and check
abdel12345 said:
Ahhhhhhhhkhkhk it messed up again :crying:. I shut my phone off and when i turned it on it had the same problem. I tried flashing cm10 kernel and it works but now the other kernels still dont work. I know what the problem is though its the backlight. Because i flashed lupus jb v8 and a rom aand it worked but you can barely see the screen. So i think its because the backlight wont turn on. On fxp cm10 and lupus lupus jb13 it works by itself though. Ahhhhh this is so frustrating. I was just about to test dixperia 3 too and now i cant. For now im going to go back to jellybean but i really wanna get this fixed but im starting to get conviced its a hardware problem. I think ill take my phone apart and check
Click to expand...
Click to collapse
-try to turn on phone with opened gamepad
-try to flash kernel with opened gamepad
-flash kernel, turn off phone, pull out battery, try to turn on after 10 minutes
-boot into (jb) rom, from flashtool, select "boot into fastboot via adb"
-flash kernel only when the Moon is in 30 degree angle between Sun and Earth lol
Sorry man, i am getting out of ideas
im going to try everything you suggested except for the last one lol. I think if none of those work i might just give up. But does anyone know if kernel affects backlight in any way because thats the problem. With other kernels the backlight is off so even highering brightness doesnt help. But with the other two kernels fxp and lupus v13 it works fine. When i flashed lupus jb v8 after fxp cm 10 kernel last time it worked. I tried the same thing again but without any results

Kernel 2in1 [ICS/GB]

Hey guyz, is there any kernel which works for both ics and gb.
There was a lupus version long time ago, but I don't remember the version. If any body know please post here.
Thanks
If I remember correctly, newest ICS Lupus (v15 or v16) can boot both ICS and GB.
Someguyfromhell said:
If I remember correctly, newest ICS Lupus (v15 or v16) can boot both ICS and GB.
Click to expand...
Click to collapse
If you can confirm? Please, TIA
I don't have the phone at hand right now, being used as temporary backup phone by a relative.
Just try it yourself. You can't really mess up anything. ICS boots definitely on that kernel, GB should, but if it doesn't, you can just flash another kernel/ROM or even stock firmware.
Someguyfromhell said:
I don't have the phone at hand right now, being used as temporary backup phone by a relative.
Just try it yourself. You can't really mess up anything. ICS boots definitely on that kernel, GB should, but if it doesn't, you can just flash another kernel/ROM or even stock firmware.
Click to expand...
Click to collapse
The thing is m not having PC availability, I have to request to my faculty for system access but only for 5-10 mins. So I can't test in that time, cause I can't stay to ics cause of its performance for long time. otherwise I wouldn't have posted this thread if I had PC.
Btw thanks mate.
Sent from my Xperia Arc S using XDA Premium 4 mobile app
DeathStroke said:
Hey guyz, is there any kernel which works for both ics and gb.
There was a lupus version long time ago, but I don't remember the version. If any body know please post here.
Thanks
Click to expand...
Click to collapse
Seems to be lupus v14. In the sticky thread for roms/root/kernels/mods etc. in arc development section (post 3, gb kernels) it's mentioned. I looked into lupus thread and in the changelog for older releases you see v14 that should boot up on ics, cm9 and gb. But I didn't test it myself :angel:
Cheers!
Lupus is ics+gb kernel (latest version) u can use both of the firmware and its based roms with this kernel.[emoji3]
So i confirm here that lupus is two in one kernel. Thanks for your response guys.
Sent from my LT18i using XDA Premium 4 mobile app

Categories

Resources