I smashed my gs 2 today and was wondering if anyone knows how much it will cost to replace i have the premium handset protection plan
http://support.t-mobile.com/docs/DOC-1722
Looks like it'll cost you around 135.
You might be able to do better if you go to a corp store.
Lets all take a moment to say a prayer for a wounded SGSII
What? It costs $135 even with the "premium" protection plan?
I paid 165.00 including shipping but had to order two of them and that was out of china... took a couple of weeks too. You might find a better price for the screen somewhere but pretty much nobody actually has them here in the US yet...
I've still got an extra screen if you want to try to talk it out of me by PM...
I also work for a small computer store locally and we do screen replacements on cell phones....
OldeCrow said:
I paid 165.00 including shipping but had to order two of them and that was out of china... took a couple of weeks too. You might find a better price for the screen somewhere but pretty much nobody actually has them here in the US yet...
I've still got an extra screen if you want to try to talk it out of me by PM...
I also work for a small computer store locally and we do screen replacements on cell phones....
Click to expand...
Click to collapse
I think he meant replaced from our carrier, the whole phone. I had a tragedy last night so I'll be needing a screen asap to replace it, use to do this for years for everyone else I knew, starting with iPhones. I may be in touch. does the replacement have the double sided tape on it already?
Sent from my SGH-T989 using XDA App
I called T mobile and i am getting a replacement phone tomorrow! it was 130
Ill upload a pic of the phone tomorrow
don't feel bad brother. The wife was in one of her moods, I had a migraine, she kept nagging. Phone went flying to the wall. After I saw what Ive done, boy was i mad. Lol. Newho using a Sensation with 4.0.3 AOSP so no complaints here. Prolly file for replacement later this week.
ALSO dude remember to get ur pics off the phone if it still turns on. I used Droid Explorer. Works like a charm and noob friendly if you don't know what you are doing.
Sent from my HTC Sensation Z710e using Tapatalk
phoenix6 said:
I think he meant replaced from our carrier, the whole phone. I had a tragedy last night so I'll be needing a screen asap to replace it, use to do this for years for everyone else I knew, starting with iPhones. I may be in touch. does the replacement have the double sided tape on it already?
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
the screen has a foam base, no adhesive, most of the adhesive is at the edges and top and bottom of the screen and will stay on the phone frame if you are careful so you only have to worry about the LCD itself, I made a couple of 1mm tape strips and put them on the back of the LCD just to keep it from vibrating or getting broke loose from the screen (like that would actually happen)...
there is a light bar at the bottom of the screen for the buttons, it's easier to let it come out with the screen and then remove it later and set it back in the phone frame. The light bar has lots of adhesive on it too.
If you preserve enough of the original adhesive in the phone frame there is no reason why a bit of contact cement (rubber cement) wouldn't hold the LCD in just fine too.
I got my screens from globaldirectparts, you have to sign up to use them but they have quite a bit of sgsII parts...
So here is what it looks like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ouch....good luck with the new one...
Wow looks like a drop to that bottom left corner huh?
Deleted
Sent from my SGH-T989 using xda premium
OldeCrow said:
the screen has a foam base, no adhesive, most of the adhesive is at the edges and top and bottom of the screen and will stay on the phone frame if you are careful so you only have to worry about the LCD itself, I made a couple of 1mm tape strips and put them on the back of the LCD just to keep it from vibrating or getting broke loose from the screen (like that would actually happen)...
there is a light bar at the bottom of the screen for the buttons, it's easier to let it come out with the screen and then remove it later and set it back in the phone frame. The light bar has lots of adhesive on it too.
If you preserve enough of the original adhesive in the phone frame there is no reason why a bit of contact cement (rubber cement) wouldn't hold the LCD in just fine too.
I got my screens from globaldirectparts, you have to sign up to use them but they have quite a bit of sgsII parts...
Click to expand...
Click to collapse
I really appreciate all of the information. I was going to buy some 3m 2mm adhesive strips (probably a roll) and a screen and have at it. I used to repair iphone screens a LOT, so I have experience in the field, I just know this phone is a little more pain in the ass.
Sucks I can't call Tmo and just get insurance, wait a week and file for it :/
how long does that site take to ship?
EDIT: Looks like you have to be a business with a fed tax ID to sign up and order, they have what I want to, the screen already in a front housing :/
rob010 said:
I work at the store. It's $130 and you get a brand new phone in box. Call asurion or visit the website.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I thought there was no guarantee on whether or not you get a refurb or a brand new in box phone?
Directly from the T-mobile PHP information on their website.
If you receive a replacement wireless device, it may be new or remanufactured.
• If the same make and model you claim is not available, a similar make and model may be substituted.
• You may also receive generic manufacturer accessories.
Oh and I don't work at the store.
Sent from my SGH-T989 using XDA App
Excuse my mistake. you are correct. I wrote my response with past experience and not policy.
Sent from my SGH-T989 using xda premium
MissMayI said:
So here is what it looks like
Click to expand...
Click to collapse
that might need the light bar for the buttons across the bottom too...
@phoenix6
The tax id field on their site you can use your SS number for it, I would suggest changing at least a couple of numbers in it though as they have no need for that info for small purchases. The sign up form is automatic and not screened so you will have access as soon as you submit the information...
It took a threatening email to them to get them to ship but i had the parts in about three days once they did ship! I would guess they are a drop shipper or had to source the parts elsewhere... they do have a US distributor too but there doesn't seem to be any stock for sgs II parts from the US distributor...
OldeCrow said:
that might need the light bar for the buttons across the bottom too...
@phoenix6
The tax id field on their site you can use your SS number for it, I would suggest changing at least a couple of numbers in it though as they have no need for that info for small purchases. The sign up form is automatic and not screened so you will have access as soon as you submit the information...
It took a threatening email to them to get them to ship but i had the parts in about three days once they did ship! I would guess they are a drop shipper or had to source the parts elsewhere... they do have a US distributor too but there doesn't seem to be any stock for sgs II parts from the US distributor...
Click to expand...
Click to collapse
Thanks! All great info. I actually found what I wanted on eBay, screen already in the front frame (lcd, digitizer, button lights, etc.) for $189 shipped. It's from Hong Kong but they promise 7 day business for US customers and they have decent reviews and still at 100%. If they don't pan out, I'll go your route. May I ask why you had to use a threatening email for them to send?
Just ordered the eBay screen, $185 - LCD, Digitizer, Frame & Bezel with tools. Steep, but hell, it's gotta get done. I'll probably take pics and do a small tut for those interested.
Just hope it doesn't take a month to come in lol.
can i have your camera lol....i dropped my phone and the protective cover is cracked..lol...jk.....
Related
So well, its been weeks since i was able to use my phone since the screen was completely shattered. Got my screen replaced today after my shipment arrive..
Used it for 30 minutes and this is what happens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, the screen is unusually "glossy"
Help!
Did I mess up something or got a fake **** shipped to me?
*sorry for bad quality image, took on a retarded phone, the only other source I have at this moment*
Sabspave said:
Did I mess up something or got a fake **** shipped to me?
Click to expand...
Click to collapse
Something similar happened to me. The day I got my phone I was cleaning the display and some of the cleaner leaked between the glass and the panel. It grew in to a big grey blob and started moving from the top of the phone to the bottom. It went completely away overnight. It just happened again a few days ago when I was putting a screen protector on. Same thing, moved from top to bottom and went away overnight. Hope your's does the same.
BTW, from the AT&T logo you're in the wrong forum. I'm guessing the displays act the same though.
BarryH_GEG said:
Something similar happened to me. The day I got my phone I was cleaning the display and some of the cleaner leaked between the glass and the panel. It grew in to a big grey blob and started moving from the top of the phone to the bottom. It went completely away overnight. It just happened again a few days ago when I was putting a screen protector on. Same thing, moved from top to bottom and went away overnight. Hope your's does the same.
BTW, from the AT&T logo you're in the wrong forum. I'm guessing the displays act the same though.
Click to expand...
Click to collapse
interesting, but I did not use any cleaner...
And I actually own the International version, I was pissed off when they shipped me the one with ATT logo but figured its just a damn logo, might as well stick to it..
I am wondering whats with the "glossy" look tho' . Nothing at all like my previous screen..Looking at it from a slightly tilted angle, it looks like those mercury mirrors! -_-
Sabspave said:
interesting, but I did not use any cleaner...
And I actually own the International version, I was pissed off when they shipped me the one with ATT logo but figured its just a damn logo, might as well stick to it..
I am wondering whats with the "glossy" look tho' . Nothing at all like my previous screen..Looking at it from a slightly tilted angle, it looks like those mercury mirrors! -_-
Click to expand...
Click to collapse
The One XL (AT&T) display is made by Sony. Maybe it's different than the Acer and Sharp in the One X? The Gorilla Glass is laminated to the display and I'd guess that would be the same part regardless of who produced the panel itself. I wonder if yours is just the display part w/o the GG glass overlay? But then what's the moisture "blob" in between? Curious.
BarryH_GEG said:
The One XL (AT&T) display is made by Sony. Maybe it's different than the Acer and Sharp in the One X? The Gorilla Glass is laminated to the display and I'd guess that would be the same part regardless of who produced the panel itself. I wonder if yours is just the display part w/o the GG glass overlay? But then what's the moisture "blob" in between? Curious.
Click to expand...
Click to collapse
I hope it doesn't matter :/
And that is my exact question, I just did some comparison with my shattered screen, the "blob" in the middle is exactly how its suppose to look like, I am guessing it is not firmly attached to lcd?
bleh I might have to visit a local phone repair shop or something.. this sucks .. Another crappy issue is that, the LEDs are way off alignment, a good centimeter off ..
day can't keep getting worse..
Since when are there AT&T branded internationals? :s
Sent from my HTC One X using xda app-developers app
4z01235 said:
Since when are there AT&T branded internationals? :s
Click to expand...
Click to collapse
It's an AT&T-branded replacement display on a Teg3 One X.
Ah that makes sense lol. I'm so out of it today.
Sent from my HTC One X using xda app-developers app
This actually makes me wonder, and as far as I once heard the designs on the at& the and the International one x may seem alike but as far as I am concerned there is a minimal design difference, but don't take my answer for 100% sure, but that's maybe a possibility. Correct me if I'm wrong.
A friend of mine just had his digitizer replaced after he smashed it and has the same issue as you. Looks like it's not bonded to the LCD properly, the screen flexes when pressed. He is sending it back for repair again.
This is why my One X repair is delayed.
I broke my One X screen over a month ago now. It's been at the repair centre for that long. The reason is that the market has been flooded with cheap, hand-made, screens that have this exact problem and they are waiting for proper screens to become available. The official screens are bonded using a machine - very few of these cheap ones are fault free.
Likewise, if you have the digitizer replaced by a 3rd party, the chances are that they will do it by hand, leading to this problem. Be careful where you send your One X for repair if you do not use HTC themselves.
Unusually glossy? Sure there isn't a protection film over it?
Dave Trouser said:
I broke my One X screen over a month ago now. It's been at the repair centre for that long. The reason is that the market has been flooded with cheap, hand-made, screens that have this exact problem and they are waiting for proper screens to become available. The official screens are bonded using a machine - very few of these cheap ones are fault free.
Likewise, if you have the digitizer replaced by a 3rd party, the chances are that they will do it by hand, leading to this problem. Be careful where you send your One X for repair if you do not use HTC themselves.
Click to expand...
Click to collapse
I think you're spot on. I'd imagine it would be almost impossible for knock-off screens to ever be produced as well as the originals based on this...
"The 4.7-inch 720p Super LCD 2 display is protected by Corning Gorilla Glass 2, which is the new version that's thinner and stronger. We first saw the Gorilla Glass 2 back at CES 2012, though the glass manufacturer did not reveal then which handsets will be featuring the technology. HTC also told us that the One X features optical lamination, a process through which the screen ends up laminated to the glass, resulting in better viewing angles. We found this to be true, and having the screen so close to the glass makes it appear brighter and more visible under sunlight."
Isnt there any kind of liquid glue we can use to make the screen crack invisible ?
No. If you want a perfect screen replacement, suck it up and pay for the price of an out of warranty repair.
Sent from my Inspire 4G using Tapatalk 2
nadejo said:
Isnt there any kind of liquid glue we can use to make the screen crack invisible ?
Click to expand...
Click to collapse
I put on a privacy screen and it looked great, the crack is hidden perfectly. Then I turned on my phone only to find out the image looked awful.
I havent found anyone happy with these 3rd party screen replacements. I am very sad, I love my phone but looking at a horrible crack makes me want to smash it against a wall.
From now on I am putting a heavy duty case on my phones.
I dont want to troll but my SGS2 had plenty of terrible falls including a 7 foot fall against a harsh Walmart parking lot. Not even a scratch. My hox was shattered for nothing
Howdy all!
Not sure if this would be considered the proper place for this but I figured I'd give it a shot.
I cracked the front glass of my S3. It sucks, as the part is very scarce in the US currently. I have found a few replacement parts on Amazon, but the starting price is about $210, a far cry from the $50 I used to pay for my EVO. I know its still early in the game, but does anyone know of a seller that has these replacement touchscreens for something a little more reasonable than 1/3 of the price of a brand new phone?
EDIT: Has anyone tried replacing just the glass, with one of these? http://www.ebay.com/itm/White-Digit...ultDomain_0&hash=item5895542a9b#ht_2317wt_906
Thanks!
Sorry but that might be the best you can get it for, for the gs3, because LCD replacements for the t-mobile sgs 2 is still $149 + shipping as the sgs 1 (Samsung vibrant) is still about $80 plus shipping (both on amazon) and these are all the cheapest prices I've found on the net over the span of a couple weeks of research.
So yeah, $210 is probably the best you're gonna get right now
-Sent from my T999 / T-Mobile Galaxy SIII
rock99rock said:
Howdy all!
Not sure if this would be considered the proper place for this but I figured I'd give it a shot.
I cracked the front glass of my S3. It sucks, as the part is very scarce in the US currently. I have found a few replacement parts on Amazon, but the starting price is about $210, a far cry from the $50 I used to pay for my EVO. I know its still early in the game, but does anyone know of a seller that has these replacement touchscreens for something a little more reasonable than 1/3 of the price of a brand new phone?
Thanks!
Click to expand...
Click to collapse
it is still new, and CURVED. It isn';t a simple cut and sell situation, they need to mold them.
OTAw said:
Sorry but that might be the best you can get it for, for the gs3, because LCD replacements for the t-mobile sgs 2 is still $149 + shipping as the sgs 1 (Samsung vibrant) is still about $80 plus shipping (both on amazon) and these are all the cheapest prices I've found on the net over the span of a couple weeks of research.
So yeah, $210 is probably the best you're gonna get right now
Click to expand...
Click to collapse
Thanks for the feedback, I'm starting to see that my LCD and digitizer are fine, just need to replace the glass with something like this: http://www.ebay.com/itm/White-Digit...ultDomain_0&hash=item5895542a9b#ht_2317wt_906
Have you seen that process anywhere? All the video I've seen are to replace the full glass/digitizer/amoled assembly.
scarrmrcc said:
it is still new, and CURVED. It isn';t a simple cut and sell situation, they need to mold them.
Click to expand...
Click to collapse
Thanks for the reply! What of just replacing the glass with this: http://www.ebay.com/itm/White-Digit...ultDomain_0&hash=item5895542a9b#ht_2317wt_906
Not sure if you can use this the glass and digitizer are fused together. I think this is just if you buy the screen and digitizer.
Sent from my SCH-I535 using xda premium
I wish it was that simple, then I could put a white face on my blue phone and have a hybrid. Maybe I'm wrong but that seems too easy...and cheap.
Sent from my SPH-L710
From my experience with other phones. The digitizer and glass are glued together... could be wrong for the gs3, but I would just replace the whole front end.
http://cnn.cn/shop/i9300-galaxy-c-1425_26_1412.html
$269 for the international white and blue.
$219 for the atnt red.
Shipping can take a little while but I've bought from this place before with no complaints.
Sent from my SGH-T999 using Tapatalk 2
Five0nIt said:
From my experience with other phones. The digitizer and glass are glued together... could be wrong for the gs3, but I would just replace the whole front end.
http://cnn.cn/shop/i9300-galaxy-c-1425_26_1412.html
$269 for the international white and blue.
$219 for the atnt red.
Shipping can take a little while but I've bought from this place before with no complaints.
Click to expand...
Click to collapse
Thank you for your feedback, this sucks! From your experience, is what I'd be receiving the actual Corning Glass face, or a 3rd party knockoff from cnn.cn?
raiderep said:
I wish it was that simple, then I could put a white face on my blue phone and have a hybrid. Maybe I'm wrong but that seems too easy...and cheap.
Click to expand...
Click to collapse
You're most probably correct, especially after seeing all the responses here regarding it. Easy and cheap though preferred, is not always the best approach unfortunately.
Well this happened to mine on Sunday, i looked for every way possible as mine was only the front glass too. It is possible to replace just the front glass but it is very very difficult to do! you have to use a heat gun or a hair dryer to separate the glass front from the lcd/digitizer video here http://galaxys3root.com/galaxy-s3-root/how-to-replace-broken-lcd-screen-on-galaxy-s3/
I just got it repaired on Monday for £150 as a local phone shop had everything in stock and did it n a hour there and then, insurance wanted £100 excess so didn't bother with it. Anyway good luck and i hope you sort it soon as i know the feeling and it sucks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I know how you feel, it sucks how expensive it is, it dropped 1 inch from my pocket to the cement. Luckily it only cracked a little in the corner, so I won't replace it for now until prices come down.
amoled screen have less layers than normal LCD's its because the amoled pixels are infused within the glass.
so they have to be replaced together
I ordered one from this seller on August 3 and receive it 5 days later they ship same day after place an order. I installed it and work fine looks original.
http://pages.ebay.com/link/?nav=item.view&id=170884092019
Sent from my HTC One XL using Tapatalk 2
m.nassy.uk said:
Well this happened to mine on Sunday, i looked for every way possible as mine was only the front glass too. It is possible to replace just the front glass but it is very very difficult to do! you have to use a heat gun or a hair dryer to separate the glass front from the lcd/digitizer video here http://galaxys3root.com/galaxy-s3-root/how-to-replace-broken-lcd-screen-on-galaxy-s3/
I just got it repaired on Monday for £150 as a local phone shop had everything in stock and did it n a hour there and then, insurance wanted £100 excess so didn't bother with it. Anyway good luck and i hope you sort it soon as i know the feeling and it sucks
Click to expand...
Click to collapse
after seeing this video, I think the best thing to do is not let your S3 dropped.
I work in a repair shop, and this phone seems new enough that I couldn't find a teardown anywhere.. so we snapped some quick pictures so people will know what to expect. It is pretty straight forward, not a whole lot can go wrong(for the most part).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Remove the two screws on the bottom, then with guitar picks, your finger nails, or something that won't damage the screen/frame(non metal is ideal) pull the edges of the frame away from the phone- the bottom is most difficult, that is where you have to put in the work.
Also note where the volume and power buttons are, there is flex cable behind there- do not slide tools along inside as you may rip them, just carefully pry the cover from the sides avoiding those as needed.. also remember part of the back is glass(at least that is what I read and it appears to be).
Pull this frame off by removing the screws from the holes that you can obviously see. If I get time later I may circle them in red, but it should be obvious.
Two screws to remove from the mic/speaker at the bottom, then it can be pried off- be careful, but not a lot of risk of damage.
You should be able to see the connectors that were removed to remove the board- as I said, this is a quick walkthru, not a detailed teardown- enough to give the general idea.
This is with the screen removed- basically you heat the front of the screen and the back of the frame to loosen the glue that holds the lcd/digitizer in- there IS glue around the edges of the LCD(and on our replacement) which makes it nearly impossible to remove without breaking.. but you likely wouldn't be removing it unless it is broken. As you can see, there is no special connectors or board on the bottom to light up the digitizer you have to be careful of, so this isn't that difficult.
Here is our replacement screen, there weren't many vendors that had them, but this was found on ebay and appeared to be quality very close to the one removed, enough we couldn't see a difference. Make sure you use plenty of adhesive if it wasn't already applied before you purchased it.
Reverse to put back together- we had 0 issues, the most difficult part is removing the shell without breaking the glass on the back of the phone.
Hopefully this is helpful to someone, or at least will show them it isn't TOO difficult. Feel free to hit the thanks button if it was helpful, if it is appreaciated I may throw a more detailed guide up when we get another in for repair.
-SBD
great info. a video would be awesome?
thks
I have tried to replace the screen as well. I think the hardest part is to take off the back cover. The place near the power and volume is actually pretty easy to break.
Sent from my Nexus 7 using xda premium
gentledroid17 said:
great info. a video would be awesome?
thks
Click to expand...
Click to collapse
Well, the tech who was doing the work wanted to take his time to make sure nothing was harmed in the process.. now that we see it is like the average teardown, we could definitely do a video on the next one- that was the plan.
athris said:
I have tried to replace the screen as well. I think the hardest part is to take off the back cover. The place near the power and volume is actually pretty easy to break.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Do you mean the power and volume flex cables that are glued to the edges beneath the back cover? We've done so many phones at this point we sort of forget how simple it is to make a mistake there.. I'll note that in the teardown instructions above.
If anyone else has any feedback or suggestions, or want to provide better pictures, let me know and I will gladly update- I just wanted to make sure there was SOMETHING out there for people who may be looking for it..
Since this phone is susceptible to glass cracks on the back due to temperature change (Like the one I purchased), a tutorial on how to replace just the glass on the back would be helpful.
Thanks!
Sent from my LG-E971 using Tapatalk 2
Well i'm part of the replacement group.
Dropped my phone a few days ago, bottom right quarter of the screen has no touch now and a nasty crack in my screen.
Which seller did you buy your replacement screen from? And was quality good?
I will try and post a video, but this is my business phone and am in a rush to get it back to fully usable condition. Thinking i may end up buying the LCD/Digitizer/Glass as I have never separated a digitizer/glass from the LCD before.
I just got mine back today from an LG service centre. I had the same crack about 3/4" from the bottom with no functionality below that. Total cost of repair was $95. Not too bad since I saw the LCD/Digitizer for $50 on ebay. Plus I retain my mfg warranty.
foster6a said:
I just got mine back today from an LG service centre. I had the same crack about 3/4" from the bottom with no functionality below that. Total cost of repair was $95. Not too bad since I saw the LCD/Digitizer for $50 on ebay. Plus I retain my mfg warranty.
Click to expand...
Click to collapse
Which provider? I wouldn't mind sending mine away and having some warranty still.
btbcomp said:
Which provider? I wouldn't mind sending mine away and having some warranty still.
Click to expand...
Click to collapse
Sasktel. LG uses a company out of Ontario for the phone repairs in Canada. Their name is All Tech Neek. I also contacted them independantly and they will fix your phone without dealing with your service provider. I just let Sasktel handle the shipping and stuff. Also, they require a deposit prior to cover shipping and assessment labour incase you decide not to have the phone fixed, but the deposit goes toward the repair if you decide to have them repair it.
Hope this helps!!
atne.ca/contact
Is the back piece of gorilla glass replaceable for sure?
Sent from my LG-E970 using xda app-developers app
I am trying to change a cracked screen. What would you say is the easiest or best way to heat the phone up to remove the front screen?
I just ordered a new lcd/digitizer and it didn't come with any adhesive. What kind of adhesive should I use and do you know of any stores that sell it. Really don't feel like having to wait longer while I order it.
Btw, I am I Canada (Calgary area) if there are any canucks that know where I can pickup what I need?
Thanks!
anyone with cracked e975 model?
Not sure if this operation can be in the DIY work. Better go to a gsm service.
Sent from LG E975 pwd by CM 10.1
JaymzBond said:
anyone with cracked e975 model?
Click to expand...
Click to collapse
bump
JaymzBond said:
bump
Click to expand...
Click to collapse
tear down on pg. 219
d-h.st/agQ
Hi folks.
Dropped my phone yesterday and completely shattered the screen. Phone still works fine so I'm sure it's just the glass that's broke.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
Going to try fix it myself but was wondering if any members have had success in repairing a cracked screen.
What I want to know is is it possible to just buy and replace the glass? It does look possible going by some of the youtube tutorials but others say the only way to get a proper fix is to buy both the glass and digitizer. Thing is though I'm looking at a bill of a little over £10 for the glass or about £130 (cheapest I've seen) for both.
Anyone had success repairing only the glass and was the screen just as responsive? I've also heard it's very hard to get it perfect with air bubbles becoming an issue. Every single mobile repair shop have quoted me for both as they won't even attempt just replacing the glass so I guess it must be hard.
PS. I notice from searching that these threads can lead to a "gorilla glass shouldn't break" discussion. Really hope it can be avoided here as it usually ends up with the original question not getting answered. I do my best to look after my phone but don't like covers bulking up my phone so I take the chance. I have a screen protector on and that's it. As much as I try to be careful with my phone I have dropped it on a few occasions and it's been fine but I guess my luck ran out this time. The phone fell flat on it's screen onto mono block and I just knew this time it wasn't going to be ok when I picked it up
Thanks
Mate, if you try to only replace the glass, you have to get rid of old glue and use new glue for the new glass, will be hard, but if you find a solution for this I might be interested too.
I have a small crack on the top corner of screen which does not come over the screen or cam, but I also would want to change my phones bezel to dark grey. It's so freaking cool! :d
Sent from my GT-N7100 using xda premium
Just wondering if either of you had a case on when it happened?
I'm trying to ascertain if/which covers are a waste of time for protecting the screen.
Best of luck fixing them though.
Sent from my GT-N7100 using xda app-developers app
johnbhoyc said:
Hi folks.
Dropped my phone yesterday and completely shattered the screen. Phone still works fine so I'm sure it's just the glass that's broke.
Going to try fix it myself but was wondering if any members have had success in repairing a cracked screen.
What I want to know is is it possible to just buy and replace the glass? It does look possible going by some of the youtube tutorials but others say the only way to get a proper fix is to buy both the glass and digitizer. Thing is though I'm looking at a bill of a little over £10 for the glass or about £130 (cheapest I've seen) for both.
Anyone had success repairing only the glass and was the screen just as responsive? I've also heard it's very hard to get it perfect with air bubbles becoming an issue. Every single mobile repair shop have quoted me for both as they won't even attempt just replacing the glass so I guess it must be hard.
PS. I notice from searching that these threads can lead to a "gorilla glass shouldn't break" discussion. Really hope it can be avoided here as it usually ends up with the original question not getting answered. I do my best to look after my phone but don't like covers bulking up my phone so I take the chance. I have a screen protector on and that's it. As much as I try to be careful with my phone I have dropped it on a few occasions and it's been fine but I guess my luck ran out this time. The phone fell flat on it's screen onto mono block and I just knew this time it wasn't going to be ok when I picked it up
Thanks
Click to expand...
Click to collapse
I had a case of broken glass, watched a lot of videos thinking about doing it myself but in the end decided to just let someone else do it. About screen responsiveness, I have a personal feeling that it's more responsive than before, maybe there is less glue (or none at all now) than before so the glass is closer to a screen. There are no air bubbles so maybe no glue Personally I think it would be enough to put glue on the sides of screen just to create a seal against dirt getting between glass and display, it would also be easier in case of another broken glass
Here in Poland it cost me 75$ (UPS 2 way + glass + repair) and took 4 days total. I'm quite happy with the results
? Should have used a case...
FinancialWar said:
? Should have used a case...
Click to expand...
Click to collapse
No case can protect you if your phone lands display down on uneven ground.....
Try dx.com
They generally sell spare parts of everything quite cheap. They do deliver free aswell (international) but waiting period could be 10 - 20 days.
Sent from my GT-N7100 using xda premium
Happened to me too.
I took it to the Samsung Repair Center and they did the assessment and told me that I could take the phone and that they'd call when they had the glass for the repair. 3 days later they called, I took the the phone there, 40 minutes later it was brand new.
They charged $80 for the service.
mat9v said:
No case can protect you if your phone lands display down on uneven ground.....
Click to expand...
Click to collapse
Op's phone landed flat....
Thanks for the replies guys. Looks like not many have actually done this.
Think I'm going to give separating the glass a chance. If I mess up the digitizer I can always just order another one anyway
I've had a single line crack right across the screen for a couple of months now. Phone still works like there is no crack, and the cost of a repair (plus the chance of a botched repair) is too high to make me want to do it. Got a Galaxy Note 8 to replace it - but then its sim slot went faulty, so back to the Note 2 while that gets fixed under warranty.
My honest advice is to let a pro repair your screen. On my previous phone I tried to replace the glass. Then I tried to replace glass and didgitiser. I warched the tutorials. Bought all the right tools. In the end my phone was "lost" so I got a new one on my insurance.
Save your self time money and stress. Send it to a pro.
Sent from my GT-N7105 using Tapatalk 2
It ain't worth just replacing the glass, way too footery and likely to get dust/fingerprints between the display and the digitiser, if you can even get it separated without damaging the display.... I cracked the glass on mine, a Samsung service centre in the UK called Regenersis tried to rip me off and quoted for a new display + glass and a new main logic board, all to the tune of £300! There's absolutely nothing wrong with the main board and the phone works perfectly, they were just trying to make a quick buck or didn't want to do the work, figuring I was some n00b and would just say go-ahead.....
Wow for £300 you can buy another one and sell the cracked screen one on eBay
Sent from my GT-N7100 using xda app-developers app
My Note 2 also met an unfortunate fate of glass-floor impact. I went down the cheap route after a lot of research and paid £30 for a glass, tools and 2M tape kit. It did the job, but I find that after a day or two, especially in this heatwave we're having at present in the UK the screen does start to lift a bit and the responsiveness of the screen does drop considerably. Pressing the screen down brings it back to normal however.
Also the cheap route brings about what looks like moisture under the screen. (attached) It's actually just where the glass is touching the digitiser, and only occurs in the middle of the screen. I assume this is only because the repair tape is on the outside of the digitiser so has some wiggle room. It'd probably not exist, or lift, if a LOCA glue was used or an all over repair adhesive was applied to the entire glass. Downside to both of these is future repairs are just as tricky as the initial repair, with lots of headgun/hairdryer use. Also with the adhesive I heard that it's very hard to get on without imperfections. I guess it depends on how well you can repair tech and/or how flush with cash you are at the time.
Hey guys.
Today I noticed I have these 4 really tiny bubbles under my screen on the bottom. I thought it was the screen protector, but I took it off and they are still there! They look like 4 miniscule dots. I can't really take a pic with my crappy phone camera but I'll try with a good camera.
Should I file a warranty claim with samsung? I think my retailer return period is up. It has been over a month since I bought it.
C2Q said:
Hey guys.
Today I noticed I have these 4 really tiny bubbles under my screen on the bottom. I thought it was the screen protector, but I took it off and they are still there! They look like 4 miniscule dots. I can't really take a pic with my crappy phone camera but I'll try with a good camera.
Should I file a warranty claim with samsung? I think my retailer return period is up. It has been over a month since I bought it.
Click to expand...
Click to collapse
I also have a line of bubbles at the edge of my screen that spans from the menu button to the back button. I'll be contacting Samsung after the holidays to request a replacement.
Systers1 said:
I also have a line of bubbles at the edge of my screen that spans from the menu button to the back button. I'll be contacting Samsung after the holidays to request a replacement.
Click to expand...
Click to collapse
Oh wow. That's exactly where mine is, but not as far reaching. Right above the back button to middle of the home button. I'm gonna try returning it tomorrow to the retailer, otherwise RMA with Samsung.
I exchanged mine twice where i got it because of this. The one i have now is good and j hope it stays that way.
I think they are dead pixels
Sent from my SAMSUNG-SM-N900A using Tapatalk
Mayonesa said:
I exchanged mine twice where i got it because of this. The one i have now is good and j hope it stays that way.
I think they are dead pixels
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Hm, pretty sure these aren't dead pixels on mine though because I can see it clearly when the screen is off. When the screen is on, there is a little bit of distortion where they are. Pretty sure its small air bubbles or dust under the screen. Don't even know how that happened.
The bubbles nay be encapsuled in the glass of the touchscreen or lcd, or the note has a gapless screen, touchscreen glued on the tft, with bubbles in the glue. Definitely a warranty case.
I noticed the same bubbles. It doesnt bother me and I need my tablet for studying so I cant wait for a replacement. I might return it of we get a knpx 0x0 root once the holidays start.
Sent from my GT-P6800 using XDA Premium HD app
Found the same near Back button. Warranty bit 1 =(
Could also be reflections of the backlight leds, visible probably on any Note under certain circumstances(viewing angle etc.) Check whether they are still there when the Note is off.
lecorbusier said:
Could also be reflections of the backlight leds, visible probably on any Note under certain circumstances(viewing angle etc.) Check whether they are still there when the Note is off.
Click to expand...
Click to collapse
Yep, they were there when the screen is off. Oh well, returned it now and just gotta buy another one from somewhere.
C2Q said:
Yep, they were there when the screen is off. Oh well, returned it now and just gotta buy another one from somewhere.
Click to expand...
Click to collapse
Hi Guys,
Anybody with tripped KNOX got any replacements or refunds? As it is a hardware problem, KNOX shouldn't be a problem. Hopefully Sammy has the same point of view...
Balázs
Solyomszem said:
Hi Guys,
Anybody with tripped KNOX got any replacements or refunds? As it is a hardware problem, KNOX shouldn't be a problem. Hopefully Sammy has the same point of view...
Balázs
Click to expand...
Click to collapse
Samsung cannot deny you warranty on a problem like this if you tripped the KNOX fuse. Refund from a retailer? Depends if they check, which I doubt
I went on a trip last week and they started showing up for me as well spanning from above the home button to beyond the back button. I was gonna sent it back as soon as I got back in Belgium, but now that I see this thread it has got me worried. I don't want to be replacing the tablet every half year if this is a recurring/common problem. Might just sell it when I get the replacement.
Samsung is just giving me more and more reasons to stay away from their products...
Honestly I'm very dissapointed with this tablet so far. Don't get me wrong, for those who want to use it as is you're probably very happy with it, but I personally customise the **** out of my devices and experiment a lot. My S1, Note1, Oppo Find5 have seen a ****load of roms and were fun to play with. I've always liked samsung because they usually have the best spects out there. But lately they have become expensive and hostile towards the community.
I've been talking to the wacom guys last week, and been asking them about their tech in the samsung note line. The reason you don't have configurable settings for your pen and stuff like that (offset, sensitivity, etc) is because samsung won't allow them to have a custom app in there. The stuff get licenced out and from there on samsung has full control.
At this point I'm actually considering just getting a 1+ One and a Microsoft Surface Pro 3, maybe have some Android dual boot action going on...
/RANT
Is there any way to remove this bubble under the glass myself?
I may have problem with warraty, also don't want to send the tablet back :/
Hi Guys,
I do not know the technical details behind these bubbly issues but - beeing an engineer, I am a lasy dude - after some days my bubbles have just disappeared.
Cheers
Sent with Tapatalk from SM-P600
This sucks
I have now sent my tablet in twice for this issue. Repair is normally fast but it sucks being without my tablet. I'm hoping they will actually replace it this time around.
Same problem with my tab pro 8.4, it started off as one but keeps spreading (it is much worse now then in this picture I took a week ago), I also thought it was screen protector but I removed it and they are still present, I handled this tablet with extreme care so this is bs, will try to return it, I really don't want to RMA it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought mine off amazon in July 2014 so its been about 3 months, It has always been used with the Official Samsung Book case, and the military shield screen protector from armorsuit.
This tablet never had any issues at all so I am furious a great tablet is going to waste over a defect like this (what did they use cheap glue?), and once samsung repair service mucks with it I doubt it will ever be right again....in my opinion all these tablet lines should be recalled as these cases all seem related bubbles start above the home button, clearly a trend here.
My P605 has this issue as well since three months ago. Annoying.
What color was every ones tab that this happened to, I can't help but notice all the black ones are no longer being sold by amazon or newegg ..etc, I asked samsung if they were already discontinued but they said its still a new tablet, But I don't get why they are out of stock everywhere?
maybe the black bezel ones have some glue defect or lcd defect
Could you tell whether these are bubbles of air in a fluid film, or lil' drops of liquid surrounded by air?
Under the colored rim of the screen there should be some foam tape, and I wonder whether the gap between touchscreen and tft is filled with something to improve contrast and clarity and to keep out moistness(will produce rainbow effects in narrow gaps, or both are directly glued together over the whole space.
Either way, the bubbles should come from pressure on the touchscreen while hitting the hardware buttons. Will squeeze out glue from the foam tape, or whatever they use, or pump air from the out- to the inside.