[Recovery] Unofficial CWM Recovery 5.5.0.4 Mar. 12, 2012 - Hero, G2 Touch Android Development

Code:
#include <std_disclaimer.h>
/*
* I am not part of the Cyanogenmod Team
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the most recent recovery image for the HTC Hero GSM compiled from CyanogenMod source repo. These builds are UNOFFICIAL and are not supported by CyanogenMod.
Also these are flashable from recovery.

thanks, I've flashed it but I can't go into recovery. Nothing happens. I've restored my old CWM recovery from Rom Manager, I've downloaded the unofficial recovery again I've tried to reflash it , no success. I keep the Home button pressed when I power up my phone but the phone just boots the rom. If I select reboot to recovery from the rom it just restarts the phone and puts it into bootloop and I have to take the battery out so it can boot into the rom. The Unofficial CWM Recovery 5.5.0.4 is not working for me

Ciprilik said:
thanks, I've flashed it but I can't go into recovery. Nothing happens. I've restored my old CWM recovery from Rom Manager, I've downloaded the unofficial recovery again I've tried to reflash it , no success. I keep the Home button pressed when I power up my phone but the phone just boots the rom. If I select reboot to recovery from the rom it just restarts the phone. The Unofficial CWM Recovery 5.5.0.4 is not working for me
Click to expand...
Click to collapse
Let me do a new build then.

Ciprilik said:
thanks, I've flashed it but I can't go into recovery. Nothing happens. I've restored my old CWM recovery from Rom Manager, I've downloaded the unofficial recovery again I've tried to reflash it , no success. I keep the Home button pressed when I power up my phone but the phone just boots the rom. If I select reboot to recovery from the rom it just restarts the phone and puts it into bootloop and I have to take the battery out so it can boot into the rom. The Unofficial CWM Recovery 5.5.0.4 is not working for me
Click to expand...
Click to collapse
Same problem as here, awaiting new build

dastin1015 said:
Let me do a new build then.
Click to expand...
Click to collapse
ok, I wait for next build to test

dastin1015 said:
Code:
This is the most recent recovery image for the HTC Hero GSM compiled from CyanogenMod source repo. These builds are UNOFFICIAL and are not supported by CyanogenMod...
[/QUOTE]
Man of his word :) Thanks
Click to expand...
Click to collapse

is the OP updated? does it work now?

darkmansd said:
is the OP updated? does it work now?
Click to expand...
Click to collapse
No, not yet. Sorry I'm busy right now with finals.
私のEVO 3Dから送信される。

Sorry for the questions, the OP was updated? Is it working?

1ceb0x said:
Sorry for the questions, the OP was updated? Is it working?
Click to expand...
Click to collapse
Sorry I haven't updated yet. I'm been busy quite a lot recently. I've been busy with usual college work load and whatnot

Related

[RECOVERY][jason] Official TWRP touch recovery for Xiaomi Mi Note 3

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
All function in a normal TWRP
Multi-language support
Support USB OTG!
Support decrypt /data!
Tips:
For unknown reason, after formatting userdata in TWRP, you won't be able to boot stock MIUI as encryption will fail. The fix is flashing factory images via MiFlash or just flash factory userdata.img via fastboot.
Decrypt Oreo userdata is NOT supported, I'll release an Oreo compatible build after it's a thing.The latest version already supports decrypting Oreo data
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot flash recovery twrp.img" in command line
5. Reboot and enjoy it
Download:
https://twrp.me/xiaomi/xiaomiminote3.html
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/TeamWin/android_device_xiaomi_jason
Thank you for your work.Do you think you will continue this project?
We will be pleased if you continue...Best regards...
Great is this TWRP with OTG, thankyou very much!
Not working otg for me!!
Enviado desde mi Mi Note 3 mediante Tapatalk
Somebody has Test with xiaomi.eu rom 8.1.11? Touch in recovery works?
Does OTG still work with one of the newer dev ROMs installed?? After installing Xiaomi.eu ROM 8.1.11, OTG stopped working for me with a different TWRP version, TWRP_3.2.1-3_jason-v2, that I downloaded from another site.
@dianlujitao could you please update this recovery to the latest source? Thank you very much!
quyleanh said:
@dianlujitao could you please update this recovery to the latest source? Thank you very much!
Click to expand...
Click to collapse
yea would be very nice!
Vihru said:
yea would be very nice!
Click to expand...
Click to collapse
Here are links to newer builds I've come across.
http://www92.zippyshare.com/v/9LsITy1z/file.html
https://yadi.sk/d/Z9ollcvX3RbiZg
https://mega.nz/#F!CUhgUIia!_QSBBwWFvtgtP3DuIl4SmQ
Pumpino said:
Here are links to newer builds I've come across.
http://www92.zippyshare.com/v/9LsITy1z/file.html
https://yadi.sk/d/Z9ollcvX3RbiZg
https://mega.nz/#F!CUhgUIia!_QSBBwWFvtgtP3DuIl4SmQ
Click to expand...
Click to collapse
https://xiaomi.eu/community/index.php?threads/43306/
Here's another one, Im using this and it works so far I used it.
Skickat från min Mi Note 3 via Tapatalk
exionen said:
https://xiaomi.eu/community/index.php?threads/43306/
Here's another one, Im using this and it works so far I used it.
Click to expand...
Click to collapse
That's the second (direct) link I posted.
Its better you post the authors threads so users can read what to expect and the authors gets credited for their work
Skickat från min Mi Note 3 via Tapatalk
Wish someone could bring the Red Wolf Recovery Project to our Mi Note 3 devices...
Do the same thing as red wolf.
Twrp_3.2.1-0
yadi.sk/d/Z9ollcvX3RbiZg
hello,
I am not allowed to start a new topic (at least not yet) so I will ask here, maybe someone can help me.
I have unlocked my MiNote3 (official way). I have installed all needed drivers on the PC (win 7) and tried to install latest TWRP on the phone.
I managed to install it but is not booting in TWRP when I press power and Vol+ or any other buttons combination.
Any idea why is not working?
I also tried to install another ROM (global developer instead of stable) but the phone is not entering in EDL mode. It's just restarting.
Any idea why?
Thanks
I am using this TWRP and the unlock pattern always appears before starting the android. Do you know how to turn it off?
nicolae.fratila said:
hello,
I am not allowed to start a new topic (at least not yet) so I will ask here, maybe someone can help me.
I have unlocked my MiNote3 (official way). I have installed all needed drivers on the PC (win 7) and tried to install latest TWRP on the phone.
I managed to install it but is not booting in TWRP when I press power and Vol+ or any other buttons combination.
Any idea why is not working?
I also tried to install another ROM (global developer instead of stable) but the phone is not entering in EDL mode. It's just restarting.
Any idea why?
Thanks
Click to expand...
Click to collapse
When you flash TWRP using adb and if everything went well type after this command :
fastboot boot twrp.img
You need to immediately after flashing twrp ,boot into it and set it up so on the next restart it wont get overwritten by stock recovery.
So the full process should be like this :
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot boot twrp.img
Yep i use that one too. Works like a charm!
dimi89 said:
When you flash TWRP using adb and if everything went well type after this command :
fastboot boot twrp.img
You need to immediately after flashing twrp ,boot into it and set it up so on the next restart it wont get overwritten by stock recovery.
So the full process should be like this :
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot boot twrp.img
Click to expand...
Click to collapse
Thank you for advice. It's working now but the TWRP doesn't stay installed.
After first reboot in Miui Stable is deleting it.
I tried everything but is just removed.
Shall I install custom rom (from Xiaomi.eu) when I enter first time in TWRP?
Will there be any issue when booting after the new ROM will be installed?
I just want to avoid bricking the devices.
Has anyone had trouble with the screen not registering touches in TWRP? I tried two different versions of TWRP and when my phone boots into it, the screen won't respond to any presses. It only worked the first time when I flashed xiaomi.eu.
Edit: I've realised that TWRP is unresponsive only if my phone doesn't vibrate when it restarts prior to entering TWRP. When it's unresponsive, I force a restart into TWRP by pressing the power button and volume up button simultaneously. The phone is never unresponsive when booting normally, so it's not clearly a hardware issue. However, it occurs in two different builds of TWRP that I've tried. Any suggestions?
Edit 2: I see I'm not the only one. https://xiaomi.eu/community/threads/twrp-3-1-1-0-no-working-touch-with-new-roms.42800/

[RECOVERY][3.2.3][NX589J] Unofficial TWRP touch recovery for Nubia Z17 Mini S

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is not void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
All function in a normal TWRP
Multi-language support
USB OTG
Decrypt /data
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot flash recovery imgfilename.img" in command line
5. Reboot and enjoy it
Download:
TWRP 3.2.3
Stock Recovery
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_nubia_nx589j_TWRP
Credits:
Thanks to www.chinadeals.it to send me the device. You can find their telegram channel here: https://t.me/ChinaDeals2017
Created 2018-08-20
Hello,
I tried to use the TWRP 3.2.3. but cannot update my installed custom ROM CNcommon V216.
What can I do with stock rom? > With that I can install Chinese version?
JoernZ17MiniS said:
Hello,
I tried to use the TWRP 3.2.3. but cannot update my installed custom ROM CNcommon V216.
What can I do with stock rom? > With that I can install Chinese version?
Click to expand...
Click to collapse
You can't use the twrp to update a stock rom, you should use the stock recovery
mauronofrio said:
You can't use the twrp to update a stock rom, you should use the stock recovery
Click to expand...
Click to collapse
Ok thanks for tip. I can boot in stock recovery, but update fails here. Must I deinstall TWRP before?
Iam afraid to loose also backup on SD card Incl. TRWP, if I install stock rom or? (Sorry for maybe easy question, but Iam not clear if TRWP is never touched...)
JoernZ17MiniS said:
Ok thanks for tip. I can boot in stock recovery, but update fails here. Must I deinstall TWRP before?
Iam afraid to loose also backup on SD card Incl. TRWP, if I install stock rom or? (Sorry for maybe easy question, but Iam not clear if TRWP is never touched...)
Click to expand...
Click to collapse
deinstall twrp? You should only flash stock recovery
mauronofrio said:
deinstall twrp? You should only flash stock recovery
Click to expand...
Click to collapse
Thanks, from OTG the install works fine for stock rom!
What is drawback from stock rom? Google play store stayed installed & also Englisch is available...?
Hello,
so Google app was still installed (like all other apps) but connection cannot be established.
ROM seems to work otherwise & also OTA works.
Do you know a working tutorial for installing again google App Store on Nubia Z17 Mini S? Rest seem to work fine!

[CLOSED] TWRP 3.3.1-1 for Pixel 3A [OFFICIAL]

Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
[I]#include <std_disclaimer.h>
/*
* Your warranty is not void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/[/I]
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
Note: Please be aware that you cannot install this without a kernel with LZMA compression support, I believe most ROMs have included my commit for this so you should be good for all custom ROMs and kernels (Not Android 10), if not please file a request to the maintainer.
To follow up, please be aware that TWRP is currently not compatible with Android 10. If you would like to use TWRP you will need to go back to Android 9. If you would like more information you can read at the link here.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. Use ADB or MTP to transfer the zip onto your device.
Go to install and browse to the zip and install the zip. The zip will install TWRP to both boot slots. Installing TWRP at this time will remove root if you are currently rooted.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
Changelog:
[BETA]
3.3.1-0: Initial release for Pixel 3A devices
3.3.1-1: Fixed having to manually change slots before rebooting.
3.3.1-2: Updated to July blobs!
3.3.1-3: Can now install TWRP to boot image. ADB, MTP, LOGD, Repack Tools and Logcat have all been removed to save the necessary space for this to work. You can grab stuff while in the OS, then flash it in TWRP (Keep in mind I have only tested this on stock as of now, feel free to test it on whatever ROM you use. It should work, but let me know if it doesn't).
3.3.1-4: Changed back to LZMA compression, also added back all the features besides ADB/Logcat. As long as your kernel supports LZMA you will be able to take advantage of installing it permanently without having to worry about space restrictions.
3.3.1-5:
Add persist entry to fstab
* To allow TWRP to store a backup settings file on /persist
and also to be used as QCOM time fix source during early boot.
Revert "Don't include logcat."
Revert "Don't include repack tools."
3.3.1-6:
Revert "Revert "Don't include repack tools.""
Add haptics firmware.
* This obviously on it's own isn't enough to get haptics working for the 3A in TWRP, but its a start.
Don't include a precompiled update_engine_sideload
* This should fix the issue of flashing officials for StatiXOS
[STABLE]
3.3.1-0: Initial official release!
Download:
https://twrp.me/google/googlepixel3a.html
XDA:DevDB Information
TWRP, Tool/Utility for the Google Pixel 3a
Contributors
ZVNexus, janjan
Source Code: https://github.com/TeamWin/android_device_google_bonito
Version Information
Status: Beta
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-07-17
Current Beta Version: 3.3.1-6
Beta Release Date: 2019-06-27
Created 2019-06-27
Last Updated 2019-11-15
Reserved
Incredible job thank you!
Thank you for all your guys hard work. I can't imagine the work involved
Congratulations and thank you for your time and effort.
This is awesome brother,,,if it werent for you we would not have a custom recovery! Thank you!
Thanks mate
Thank you!!!!!!!!
Shoud we allow Modifications or Keep Read Only when we boot for the first time?
WOOHOO!!! Thank you for this, it's so exciting!!!
Quick question: the instructions say there is also a zip to download but I didn't see it in anywhere. Do we really need it? TWRP did boot up temporarily just fine!
zombioptic said:
WOOHOO!!! Thank you for this, it's so exciting!!!
Quick question: the instructions say there is also a zip to download but I didn't see it in anywhere. Do we really need it? TWRP did boot up temporarily just fine!
Click to expand...
Click to collapse
Read the note
Fentadroid said:
Read the note
Click to expand...
Click to collapse
Ah yes... My bad!
Thank you for TWRP mate
Sent from my Pixel 3a using Tapatalk
Great job, now all we need is some proper rooting/with magisk, and everything will be golden!
jayyskittles said:
Great job, now all we need is some proper rooting/with magisk, and everything will be golden!
Click to expand...
Click to collapse
Magisk pushed a cannery build that roots for the Pixel 3s on Q4 last night.
Also, the Magisk dev has a Pixel 3 on Q4 (not 3a) that is his daily driver. So because of the similar file systems, it's good news for us on P3a.
Edit:
https://twitter.com/topjohnwu/status/1144159892430659584?s=09
12paq said:
Magisk pushed a cannery build that roots for the Pixel 3s on Q4 last night.
Also, the Magisk dev has a Pixel 3 on Q4 (not 3a) that is his daily driver. So because of the similar file systems, it's good news for us on P3a.
Edit:
https://twitter.com/topjohnwu/status/1144159892430659584?s=09
Click to expand...
Click to collapse
Does that canary build work for us?
jayyskittles said:
Does that canary build work for us?
Click to expand...
Click to collapse
Only if we get a Q compatible twrp. Or if someone can provide the Q beta 4 boot.img
jayyskittles said:
Does that canary build work for us?
Click to expand...
Click to collapse
For root It should even without TWRP. Pull the boot.img from the beta, modify it with Magisk Manager then Fastboot flash the modified boot image.
I have not tried it yet. I am still trying to spell canary correctly. :laugh:
Not sure how many of you have tested this thing out, but I can confirm it works on the stock rom. I had to root for a Titanium Backup, so I flashed Magisk through TWRP and rebooted just fine.
Finnaly!! Good work to OP who worked hard to get us this TWRP!
12paq said:
For root It should even without TWRP. Pull the boot.img from the beta, modify it with Magisk Manager then Fastboot flash the modified boot image.
I have not tried it yet. I am still trying to spell canary correctly. :laugh:
Click to expand...
Click to collapse
I wanted to try it tomorrow, but it seems ill better wait for a new update on the canary build:
https://github.com/topjohnwu/magisk_files/blob/master/canary_builds/notes.md
-> see the notes for the latest build. Afaik we need logical partition support or root will not work (correctly)
I'm also thinking if i can just pull boot.img via twrp backup (then extract if needed) or should i pull it via fastboot.
Really the userdata wipe holds me back (when OEM unlocking the device.)
Guess i will wait when root is successfully reported on P3 by topjohnwu, just to be sure.

[RECOVERY][UNOFFICIAL] TWRP 3.4.0.0

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.​
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Install guide:
Boot :
Code:
fastboot boot <twrp.img>
Install :
Code:
fastboot flash recovery <twrp.img>
Download:
twrp-3.4.0-0-def-test2.img
XDA:DevDB Information
TWRP, Tool/Utility for the Motorola One Hyper
Contributors
vache
Source Code: https://github.com/TeamWin/android_bootable_recovery
Version Information
Status: Beta
Beta Release Date: 2020-08-29
Created 2020-08-29
Last Updated 2020-09-14
So who is going to be the 1st to try this? I am afraid to muck up my phone
jharkness316 said:
So who is going to be the 1st to try this? I am afraid to muck up my phone
Click to expand...
Click to collapse
I'm not the first to test it, but I booted into it and flashed some stuff. It won't brick your phone, thats for sure.
Does this mean we can finally do backups of our roms like other phones along with installing like other roms?
I thought that I read there was no way to do an Android 10 backup due to different? ways of the architecture of Android and permissions.
It works
jharkness316 said:
Does this mean we can finally do backups of our roms like other phones along with installing like other roms?
I thought that I read there was no way to do an Android 10 backup due to different? ways of the architecture of Android and permissions.
Click to expand...
Click to collapse
Ive tested it on my Motorola one Hyper (Model: XT2027-3) and it works!
After booting into the twrp.img file you can make a backup.
Cause of a stupid mistake i had bricked my phone, but the backup i made fixed to normal again.
Ive installed magisk 20.4 and the 'Disable_Dm-Verity zip' after that, no problems at all.
Joepeke3 said:
Ive tested it on my Motorola one Hyper (Model: XT2027-3) and it works!
After booting into the twrp.img file you can make a backup.
Cause of a stupid mistake i had bricked my phone, but the backup i made fixed to normal again.
Ive installed magisk 20.4 and the 'Disable_Dm-Verity zip' after that, no problems at all.
Click to expand...
Click to collapse
Thank you so much
This weekend's project
Booting TWRP is working for me but can't seem to flash it permanently no matter what I try. I even booted into TWRP and flashed the TWRP image file. Any ideas?
Edit: HELP! I tried flashing the latest OmniRom through TWRP and the phone no longer turns on. There's no response when I connect it to my PC or power directly. Please, please, please help me.
2nd Edit: The dev helped me get phone working again. This recovery doesn't seem to play nice with my variant.
Update : https://drive.google.com/file/d/1s1uPhCMuybw7ognlvUGWi5MEaVEa4XgQ/view?usp=sharing
Fix booting TWRP when flashed
vache said:
Update : https://drive.google.com/file/d/1s1uPhCMuybw7ognlvUGWi5MEaVEa4XgQ/view?usp=sharing
Fix booting TWRP when flashed
Click to expand...
Click to collapse
Can confirm, it does persist.
Very good! it works normally!
m666p said:
Can confirm, it does persist.
Click to expand...
Click to collapse
I have to flash it on fastbootd?
Zaisxda said:
I have to flash it on fastbootd?
Click to expand...
Click to collapse
Yup or regular fastboot
m666p said:
Yup or regular fastboot
Click to expand...
Click to collapse
And can i flash omnirom via recovery?
Zaisxda said:
And can i flash omnirom via recovery?
Click to expand...
Click to collapse
Yup, just wipe and flash it twice.
m666p said:
Yup, just flash it twice.
Click to expand...
Click to collapse
how twice? can you explain more?
Zaisxda said:
how twice? can you explain more?
Click to expand...
Click to collapse
Go the the omnirom thread, I was just talking to someone else about it.
MicrosoftBug said:
Booting TWRP is working for me but can't seem to flash it permanently no matter what I try. I even booted into TWRP and flashed the TWRP image file. Any ideas?
Edit: HELP! I tried flashing the latest OmniRom through TWRP and the phone no longer turns on. There's no response when I connect it to my PC or power directly. Please, please, please help me.
2nd Edit: The dev helped me get phone working again. This recovery doesn't seem to play nice with my variant.
Click to expand...
Click to collapse
i've also got a brick here now for the same reason. didn't realize it was a specific variant, especially since flashing unofficial with fastbootd worked fine before. can i get some help?
ashkitten said:
i've also got a brick here now for the same reason. didn't realize it was a specific variant, especially since flashing unofficial with fastbootd worked fine before. can i get some help?
Click to expand...
Click to collapse
Check the OmniROM thread.
Sent from my BLA-L29 using Tapatalk
MicrosoftBug said:
Check the OmniROM thread.
Sent from my BLA-L29 using Tapatalk
Click to expand...
Click to collapse
thank you! i didn't see that.
TWRP can't decrypte the data when Omni have system password.

RMX2061, the current image(boot/recovery) have been destroyed

whenever i am trying to add twrp on my phone, realme 6 pro, RMX2061, it doesnt flash and says the current image(boot/recovery) have been destroyed, i wrote the right command, even disabled vbmeta but it wont. i had to install stock recovery and factory reset to get my phone back, but is there any other way to install twrp or any other custom recovery, or fix my problem.
Deadshot3219 said:
whenever i am trying to add twrp on my phone, realme 6 pro, RMX2061, it doesnt flash and says the current image(boot/recovery) have been destroyed, i wrote the right command, even disabled vbmeta but it wont. i had to install stock recovery and factory reset to get my phone back, but is there any other way to install twrp or any other custom recovery, or fix my problem.
Click to expand...
Click to collapse
I've faced the same issue.At first you have to unlock your bootloader then flash an appropriate version of orange fox recovery for your device.I've tried twrp recovery but didn’t work.
fardinrafi88 said:
I've faced the same issue.At first you have to unlock your bootloader then flash an appropriate version of orange fox recovery for your device.I've tried twrp recovery but didn’t work.
Click to expand...
Click to collapse
i have unlocked bootloader, what version of orange fox would be suitable, i have latest android 11 on my phone
Deadshot3219 said:
i have unlocked bootloader, what version of orange fox would be suitable, i have latest android 11 on my phone
Click to expand...
Click to collapse
Google it up
Deadshot3219 said:
i have unlocked bootloader, what version of orange fox would be suitable, i have latest android 11 on my pphonnm
Click to expand...
Click to collapse
Deadshot3219 said:
i have unlocked bootloader, what version of orange fox would be suitable, i have latest android 11 on my phone
Click to expand...
Click to collapse
You can check this link and download from the drive according to your need
[RECOVERY][RMX2061][RMX2170][Unofficial]OrangeFox Recovery Project [R11.X]
OrangeFox Recovery Project /* * Your warranty is now void. * * We're not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com

Categories

Resources