Related
have downloaded update rom v 1.40 form the imate site. and connected my device to my PC via bluetooth link and sync through active sync4.5 and then run the update setup setup found the device v 1.22 and ready to update it to v1.4. and then after the restart (which the setup automaticlly does) a display with out back light appers which says (Serial v2.07). i tried to soft reset and hard reset but nothing happens, on the short i am unable to load os on my device and stucked to this display (Serial v2.07). i do not have data cable or cradel. any solution Please.
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
I have an imate pocket pc phone edition I have some how wiped out the rom and when i try to install another one i ge error 101 connection error I have tried another rom downloads but get the same result. the rom im trying to install is the RUU172126WWE_imate.exe. The only screen I have up on the imate at the moment is USB v1.06
Can anyone please tell me what im doing wrong and how to fix this problem.
Very stressed out
Remove the handset from the cradle and put it again..after u remove u shd see serial instread of USB..if u see this then yr phone is Good alive..else press Power+Action+reset to get into bootloader mode again and cradle yr device..RUN the proper ROM update..
For more details visit wiki
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
gun said:
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
Click to expand...
Click to collapse
Hi,
Is your solution apply on JAMin mobile, also can you guide me how to download the Romupdate file?
Thank you,
Easiest unlock ever (works on i780 and Omnia):
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*#
If anyone wants me to dig for the codes for Omnia, please send me DialParserGSM.dll file from Omnia ROM dump...
_TB_TB_ said:
Easiest unlock ever:
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Click to expand...
Click to collapse
Great. I'll try that ;-)
GREATS! it works very well!!!
Voila!!! Work on i780. Does it will work on others ?
_TB_TB - thanks!.. you're a guru in i780.. hopefully you can do something about the keypad lock
I think it should work for all Samsung devices, since the device can have only one lock of given type at one time, namely it is enough to overwrite the existing lock with a new one (actually, its stupid that they left the simlocking tool in ROM...)
Huh!!! Unlocking boxes are killed now The trick is in litle .exe file. I'll test on omnia as soon as possible
edit: Can you upload here this litle .exe file ?
The Personalize.exe should be in any ROM
Hi, great post! Thanks!
So this will unlock samsung Omnia for use with other sim?
My Omnia Vodafone arrives in 10 days... wait for your answer.
It's work on my samsung player addict @_TB_TB_ you're the GUY,very thanks happy new year.
_TB_TB_ said:
Easiest unlock ever (works on i780 and Omnia):
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*#
If anyone wants me to dig for the codes for Omnia, please send me DialParserGSM.dll file from Omnia ROM dump...
Click to expand...
Click to collapse
W00t Works! Samsung Omnia Vodafone Dutch Locked --> now Dutch KPN
Today Unlock is the easyest thing Work on i900 - tested before 5 mins, 3 pieces succesfully done
_TB_TB_ said:
Easiest unlock ever (works on i780 and Omnia):
1) Download attached ZIP file
2) copy all three .lnk files to your PPC
3) run Lock.lnk
4) enter valid MCC/MNC of any carrier (I used my "real" SIMLock carrier ID, list: http://en.wikipedia.org/wiki/Mobile_Network_Code ; eg. 26001 for Poland, Plus)
5) As NCK, enter 12345678
6) tap OK (it should tell that SIMLock enabled)
7) run Status.lnk to see if its locked
8) run Unlock.lnk
9) enter code entered in point 5 (12345678)
10) voila
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*#
If anyone wants me to dig for the codes for Omnia, please send me DialParserGSM.dll file from Omnia ROM dump...
Click to expand...
Click to collapse
Don´t worked in my Omnia
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*# it says: Fail to Set Locking Status
Any sugestion?
spartakus said:
Don´t worked in my Omnia
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*# it says: Fail to Set Locking Status
Any sugestion?
Click to expand...
Click to collapse
Same here, when entering any mcc/MNC other than the good one I get a "You entered Incorrect MCC/MNC",
when entering the real SFR 20810 I get "Fail to Set Locking status"
thank you very much.
did you have a solution to bricked omnia after update the device ?
thank you so much
it worked in my omnia i900
Hi, same for me too as spartakus (Omnia). Carier ID: 21620.
It would be fine to have the right code. Thanks.
Thanks for this !!
I made it ON MY OMNIA and it tells me that the phone is unlocked.
I will say that you must enter your PIN code of your SIM card before !
If you don't it doesn't work
carabaothai said:
Thanks for this !!
I made it and it tells me that the the phone is unlocked.
I will say that you must enter your PIN code of your SIM card before !
If you don't it doesn't work
Click to expand...
Click to collapse
I think all of us have done that, but doesn´t worked anyway...
Alternative method, works on i780, no copying of anything required:
- in 3), instead of launching .lnk, type the following code in the Phone app: *7465625*638*00000000*00000000#
- in 7), instead of launching .lnk, type the following code in the Phone app: *#7465625#
- in 8), instead of launching .lnk, type the following code in the Phone app: #7465625*638*00000000#
00000000 оR any 8-digit number and should work fine
For those having problem with installing Chevron, specifically, the "uh oh" error.
IF METHOD 1 doesnt Work, Try method 2!
TWO METHODS.
METHOD 1:
1. Click the Windows Icon.
2. On the search box, type device manager, click enter
3. Click continue when prompted
4. On the device manager window, find "Portable Devices"
5. Right click on your Leo. Uninstall
6. Unplug your device. if you can find another "Portable Devices" uninstall it also (as it was for my case)
7. Restart PC
8. Plug device again (Do not open Zune software yet)
9. Windows should try to install driver for the device. Click on it. After installing there should be two things in there... the other one is your Leo
ready to use. I can't remember the other one, but I think it is "storage card ready to use"
10. When done correctly. Zune will open up on its own.
11. See the device sync
12. Your free space should appear in the zune software
13. Run Chevron
14. It should open now without the "uh oh" error
Then follow the original instruction on how to install chevron
METHOD 2
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to
windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
Attention: if port 443 is used (see on your list) stop IIS or exit Skype program
Hope this helps
both method doesn't work especially the host after deleting as stated save it when open it again still the windows still exist.
but nvr mind i don't have any problem using third party software like register edit etc.
Perefect. i had trouble but option 2 work like a charm! one suggestion, instead of opening an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to, it is easier to Open up "Notepad" as administrator" Then click on File > Open (in the file name)
%windir%\system32\drivers\etc\hosts and and delete any references to
windowsphone developer services, you save it and you are done.
for me both of this methods don t work i have 7.0.7394 os version!!!what to do please HEALP!!
This guide is only for Android smartphones who has problems with IMEI number on MTK chipsets….
“I am not responsible for any damage caused to your phone by using this”
Method 1 – Using Engineer Mode (You must have rooted your device before doing this procedure)
Open the Dialer and type *#*#3646633#*#* you will enter the MTK Engineering Mode or using Mobile Uncle APP Hit the Engineer Mode option and choose the Engineer Mode (MTK).
On EngineerMode Chosee Connectivity and click the CDS information option.
You will see Radio information there and after tapping on it. If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Click Phone 1
At “AT+” line add : AT+EGMR = 1,7,”my_first_IMEI_code”
Click on “SEND AT” button below
For second SIM tap Phone 2 and type this command
AT+EGMR=1,10,”my_second_IMEI_code”
Click on “SEND AT COMMAND” button below a second time
Reboot phone
Verify codes with *#06#* if IMEI codes are ok
Method 2 – Using Terminal Emulator (You must have rooted your device before doing this procedure)
change imei with terminal emulator
Install Terminal Emulator
Launch the Terminal Emulator app
Type SU then press ENTER button to get Superuser permission
After that, type this command then press ENTER button
echo ‘AT+EGMR=1,7,”IMEI_NUMBER”‘ >/dev/pttycmd1
If you have dual SIM add this line
echo ‘AT+EGMR=1,10,”IMEI_NUMBER”‘ >/dev/pttycmd1
Last step, reboot your phone/tablet and DONE!
Method 3 – Using MTK Droid Tool
Download MTK droid tools and Extract on your PC/Laptop
Download Universal USB Driver
Enable USB debugging on the phone then connect it to the PC (don’t enable mass storage)
Install Universal USB Driver on the PC with the phone connected; you should get a message saying drivers installed successfully.
Launch MTK droid tools on the PC (still with phone connected to PC)
MTK droid tools should detect and display your phones details
Next you need to click the ROOT button so that it will temporary have Root shell access on your phone in order for it to make the script work on the background.
Click on IMEI/NVRAM
change imei mtkdroid tool
Put your 15 Digits IMEI Number that you can get at the back of your phone inside not the back cover if you have 2 IMEI you need to put that.
Then click Replace IMEI
Restart your phone if it isn’t automatically restarted
Your IMEI issue should have been resolved
I am not responsible for any damage to your phone,do it at your own risk.
Instead we can use mobileuncle tools application from play store for this we need root
Fix Found .
Ghostrider26 said:
This guide is only for Android smartphones who has problems with IMEI number on MTK chipsets….
“I am not responsible for any damage caused to your phone by using this”
Method 1 – Using Engineer Mode (You must have rooted your device before doing this procedure)
Open the Dialer and type *#*#3646633#*#* you will enter the MTK Engineering Mode or using Mobile Uncle APP Hit the Engineer Mode option and choose the Engineer Mode (MTK).
On EngineerMode Chosee Connectivity and click the CDS information option.
You will see Radio information there and after tapping on it. If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Click Phone 1
At “AT+” line add : AT+EGMR = 1,7,”my_first_IMEI_code”
Click on “SEND AT” button below
For second SIM tap Phone 2 and type this command
AT+EGMR=1,10,”my_second_IMEI_code”
Click on “SEND AT COMMAND” button below a second time
Reboot phone
Verify codes with *#06#* if IMEI codes are ok
Method 2 – Using Terminal Emulator (You must have rooted your device before doing this procedure)
change imei with terminal emulator
Install Terminal Emulator
Launch the Terminal Emulator app
Type SU then press ENTER button to get Superuser permission
After that, type this command then press ENTER button
echo ‘AT+EGMR=1,7,”IMEI_NUMBER”‘ >/dev/pttycmd1
If you have dual SIM add this line
echo ‘AT+EGMR=1,10,”IMEI_NUMBER”‘ >/dev/pttycmd1
Last step, reboot your phone/tablet and DONE!
Method 3 – Using MTK Droid Tool
Download MTK droid tools and Extract on your PC/Laptop
Download Universal USB Driver
Enable USB debugging on the phone then connect it to the PC (don’t enable mass storage)
Install Universal USB Driver on the PC with the phone connected; you should get a message saying drivers installed successfully.
Launch MTK droid tools on the PC (still with phone connected to PC)
MTK droid tools should detect and display your phones details
Next you need to click the ROOT button so that it will temporary have Root shell access on your phone in order for it to make the script work on the background.
Click on IMEI/NVRAM
change imei mtkdroid tool
Put your 15 Digits IMEI Number that you can get at the back of your phone inside not the back cover if you have 2 IMEI you need to put that.
Then click Replace IMEI
Restart your phone if it isn’t automatically restarted
Your IMEI issue should have been resolved
I am not responsible for any damage to your phone,do it at your own risk.
Click to expand...
Click to collapse
Please thank me if i helped you.
Fix found : -> http://forum.xda-developers.com/canvas-a1/general/fix-imei-perfect-fix-android-imei-t2943567
this will work in old versions, I tried in Engineer Mode v1.8.0, CDS Information is gone, had to flash my device with Android 5.1 and probably an older version of Engineer Mode app
Imei change mtk 6753 homtom ht20 pro android 6.0 sdk 23
NO ROOT
In dialler
*#*#12306#*#*
bring you to secret sub menu in mtk engineering mode
not available in this menu by using this code to *#*#3646633#*#* that option change imei is not available in NORMAL MTK Engineering MODE as CDS information witch one REQUIRED ROOT PERMISSION TO ADD CDS information IN SUB MENU IN NORMAL MTK Engineering MODE
Error shown this command is not allowed in user build. please tell what to do next
Error shown this command is not allowed in user build. please tell what to do next
kbsoni156 said:
Error shown this command is not allowed in user build. please tell what to do next
Click to expand...
Click to collapse
Put a space after AT like "AT +" and not "AT+". Rest should be written as above..
I recently found a problem while doing method 1
"This command is not allowed in user build"
So the solution for that is:-
When we are writing
AT+EGMR = 1,7,”IMEI_code”
we have to give a space b/w AT and +
so final command will be like this
AT +EGMR=1,7,"IMEI_code"
Hit thanks if it worked for u
vinaykharayat said:
I recently found a problem while doing method 1
"This command is not allowed in user build"
So the solution for that is:-
When we are writing
AT+EGMR = 1,7,”IMEI_code”
we have to give a space b/w AT and +
so final command will be like this
AT +EGMR=1,7,"IMEI_code"
Hit thanks if it worked for u
Click to expand...
Click to collapse
FWIW, this doesn't work on a BLU Vivo 5R running Nougat. Gives the same not allowed error with or without the space.
lugnut2099 said:
FWIW, this doesn't work on a BLU Vivo 5R running Nougat. Gives the same not allowed error with or without the space.
Click to expand...
Click to collapse
And just to add on, the terminal commands don't work either. They're accepted without any kind of error, but upon reboot there's still nothing there.
Thanks
It worked perfectly on Lenovo tab 2 a8-50lc, couldn't click thank you button though, its greyed out.
P.s: must have root access. Tried without root gave not allowed in userbuild.
lugnut2099 said:
And just to add on, the terminal commands don't work either. They're accepted without any kind of error, but upon reboot there's still nothing there.
Click to expand...
Click to collapse
No error message either, but not working also.
//Tested on ZTE Blade V10, Android 9, V1.8