Develop Bugs

[Q] [Question] Going back to Stock Froyo !

Hey XDA ,
This is my first Post here , Pardon me if I sound noobish (I'm a noob but I learn fast and I'm on my way of becoming an electrical enigeneer)!
I have an HTC Wildfire , rooted using the method in this thread a few months ago
http://forum.xda-developers.com/showthread.php?t=1145035
I'm Currently on CM 7.1.0.1 , and I have CWM 5.0.2.0 flashed
I went through a few versions of CM7 and this is the one that satisfies me the most.
However , I want to go back to Stock Froyo , basically because I want more stability and I think It'd be nice to have sense back (And I think the GPS is not working but It's not too important for me) , and I thought , I already have the phone rooted so I can install custom kernels , OC , ... , while still having the stock ROM .
I heard that going back to Froyo would make me "Lose" the Rooting .
First of all , What does this mean ? and is there a way of doing it without "Loosing " Root or Bricking the phone ?
If not , please recommend the best Sense ROM available that could be as good as CM7 with minimal known bugs (would appreciate download links).
One last thing (Don't know if it's relevant) , I partitioned my SD and it's working great using the Link2SD App , Is my SD still a GoldCard?
I went through the forums and couldn't find an answer , And again , sorry for sounding like a noob and thanks in advance !

Hey pal your best bet is to run a custom froyo sense rom that will keep root and work with your Sdcard partition. I suggest rem puzzle as its fast stable with app2sd and GPS working. Something to note, when you install it it will reboot a few times and take up to 15 minutes. Its normal, don't panic
Sent from my HTC Sensation XE with Beats Audio using xda premium

thanks man , I guess I'll give it a shot in a few days
What about Gingerbread Sense ? Any recommendations?

Maverick5992 said:
thanks man , I guess I'll give it a shot in a few days
What about Gingerbread Sense ? Any recommendations?
Click to expand...
Click to collapse
Right now, your best bet for speed and stability would be RemPuzzle.
Gingerbread Sense Tom's like KoolSense work, but they're a bit slow.
Sent from my Ainol Novo7 Elf using xda premium

ahhh why go back to stock Sense Rom, trust me, its become a habit for me to change roms like socks! therz so many to chose from mate. and yes i must admit stability is a huge factor in choosing a rom. my major issue with sense is the lack of over clocking. I tried kwbr rom, its sense alright, with beats audio but no overclocking ability, any way I use CM 7.2 RC3 for everyday use, its super stable and fast. i use go launcher as my everyday launcher as well, but its all a matter of taste in what you like, here is a link to the various roms available to our dear wildfire
http://forum.xda-developers.com/showthread.php?t=1029318
if you really insist on going back to stock sense, i will post the RUU link but just browse these rroms for a while hey...
PS. if i helped, please click thanks

Alphabrad said:
ahhh why go back to stock Sense Rom, trust me, its become a habit for me to change roms like socks! therz so many to chose from mate. and yes i must admit stability is a huge factor in choosing a rom. my major issue with sense is the lack of over clocking. I tried kwbr rom, its sense alright, with beats audio but no overclocking ability, any way I use CM 7.2 RC3 for everyday use, its super stable and fast. i use go launcher as my everyday launcher as well, but its all a matter of taste in what you like, here is a link to the various roms available to our dear wildfire
http://forum.xda-developers.com/showthread.php?t=1029318
if you really insist on going back to stock sense, i will post the RUU link but just browse these rroms for a while hey...
PS. if i helped, please click thanks
Click to expand...
Click to collapse
You can overclock sense based roms. Rempuzzle has an overclockable kernal included. For kwbr you will have to flash a different kernal.
Sent from my HTC Wildfire using XDA

Maverick5992 said:
Hey XDA ,
This is my first Post here , Pardon me if I sound noobish (I'm a noob but I learn fast and I'm on my way of becoming an electrical enigeneer)!
I have an HTC Wildfire , rooted using the method in this thread a few months ago
http://forum.xda-developers.com/showthread.php?t=1145035
I'm Currently on CM 7.1.0.1 , and I have CWM 5.0.2.0 flashed
I went through a few versions of CM7 and this is the one that satisfies me the most.
However , I want to go back to Stock Froyo , basically because I want more stability and I think It'd be nice to have sense back (And I think the GPS is not working but It's not too important for me) , and I thought , I already have the phone rooted so I can install custom kernels , OC , ... , while still having the stock ROM .
I heard that going back to Froyo would make me "Lose" the Rooting .
First of all , What does this mean ? and is there a way of doing it without "Loosing " Root or Bricking the phone ?
If not , please recommend the best Sense ROM available that could be as good as CM7 with minimal known bugs (would appreciate download links).
One last thing (Don't know if it's relevant) , I partitioned my SD and it's working great using the Link2SD App , Is my SD still a GoldCard?
I went through the forums and couldn't find an answer , And again , sorry for sounding like a noob and thanks in advance !
Click to expand...
Click to collapse
I suggest you to flash this Rom, hope you will be happy.http://forum.xda-developers.com/showthread.php?t=878115
hit Thanks if helped

Thanks Everyone for your help, I'll go with a Froyo custom ROM from the index , Stock isn't worth the trouble anyways

saadislam said:
You can overclock sense based roms. Rempuzzle has an overclockable kernal included. For kwbr you will have to flash a different kernal.
Sent from my HTC Wildfire using XDA
Click to expand...
Click to collapse
oooohhhh, we learn everyday. thanks! will try

HELP please :eek:

hey guys is there any stable ICS rom out there for our phone ?
and everytime i use an ICS rom the kernal panicked when i watch a video without OC

lolztruck said:
hey guys is there any stable ICS rom out there for our phone ?
and everytime i use an ICS rom the kernal panicked when i watch a video without OC
Click to expand...
Click to collapse
ICS roms for p350 are still in beta condition due to our device's hardware restrictions,, but our hard-working devs are trying their best to make a fully stable rom. Try to report bugs on respective threads so that devs can rectify it.
Btw, you can try low memory roms like Minicm10, Oxygen ICS etc. ^_^
Don't say thanks, just press it...!!!

kernal panic
ankitshankar said:
ICS roms for p350 are still in beta condition due to our device's hardware restrictions,, but our hard-working devs are trying their best to make a fully stable rom. Try to report bugs on respective threads so that devs can rectify it.
Btw, you can try low memory roms like Minicm10, Oxygen ICS etc. ^_^
Don't say thanks, just press it...!!!
Click to expand...
Click to collapse
But about the kernal panic is it due to the processor or the rom ?

Probably a driver issue... Not sure, it panics even when you download anything past 1.3 MB in size...
Sent from my GT-S5830M using Tapatalk 2

I think the most stable ICS rom is this, but the battery life isn't very good.
http://forum.xda-developers.com/showthread.php?t=2112061

[Support] [FAQ] [BL7] working GB-based ROMs for green lens defys

Hi @ all.
I want to start a support thread for all those unlucky ones who flashed a BL7-sbf on their green-lensed defy.
NOT the Defy+ or red lens, because the green one is the one for real trouble.
I am aware that you can always install a CM10 by quarx, but I wanted to have a more smooth and stable solution.
You should verify, that you are on a BL7. If you don't know what that means, you should not be here, Do not use these rooting instruction unless you know, you are on BL7. If you're questionning here, what are advantages, or disadvantages, or how you can find out what BL you have, please leave NOW.
This thread is for those who know what's cookin'.
I cannot stress this enough - be sure. search the forums. Don't flood this with useless questions.
I'll try to keep the first posts updated regularly, so that there should be no reason to read the whole thread everytime.
Now let's get started:
1. As far as I know, Froyo is no longer an option.
So, your options start with GB ROMs plus the camera fix. Please comment if they work and how.
I am sure somebody already built such roms.
2. You can also use a 2ndboot-based CM7 build like ms2ginger.
I don't know how many of those exist.
3. What I need you for:
Please add your own rom, when you know it's working on BL7.
Please add the rom you're using, when you're on BL7 with working SOC cam.
Questions:
It would be really helpful to know if ANY GB ROM will work with the camera fix.
It would also be helpful to know, if we should use custom MB525 or MB526 builds as base rom.
Working Roms:
1. MS2Ginger
2. tbc.
3. tbc.
First try (all flashed via custom recovery):
1. I managed to get a working CM 7.2, from early may 2013 with GB Kernel. (cm72-20120506-NIGHTLY-Defy+.zip)
2. Rooted via Defy+ BL7 method (sig)
3. Sndinit 2.3 (you should use 2.0, because some said they had problems with the 2.3 version) i am writing this a week later, so I hope this is correct
5. camera did NOT work
What I did NOT get to work (yet):
1. update-CyanMobile-eXperience-Defy-20130502-Release.zip
2. WajkIUI_multilang_3.1.27.zip
3.
Unfortunately "not working" means usually no more bootups, no way to get into custom recovery for restoring or reflashing, so you'll have to start all over again:
1. Flash first sbf (sig)
2. Flash second sbf for root (sig)
3. Install SndInit 2.0
4. boot into recovery
5. flash your new flavour
...tbc

for supporters
If someone managed to get a custom ROM to work, please provide following informations:
Build# of the "wrong" sbf
sbf's used for root (there are already 2 known combinations, CN & CEE)
used SndInit (should be greater than 2.0 i guess)
full flash instructions
which recovery used for wiping
which one for flashing
how many reboots
approx. duration of the process
ROM Version and build
Information about 2nd boot or 2nd init and when to set it
Does the camera work?
Please, ONLY BL7 stucking ROMs, this is a special thread for special cases.

reserved
reserved.

THK For start this thread.
I am on DFP231 BL7 Green Lens.
By flashing rooted SBF BL7 AND quarx CM10 (2nd boot)
Camera Work.
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10-20130409-NIGHTLY-mb526.zip
But my Battery not work.

first CM7 known to work
Look here:

jalal-jap said:
THK For start this thread.
I am on DFP231 BL7 Green Lens.
By flashing rooted SBF BL7 AND quarx CM10 (2nd boot)
Camera Work.
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10-20130409-NIGHTLY-mb526.zip
But my Battery not work.
Click to expand...
Click to collapse
Thanks, but this thread is GB-based ROM's only.
I wanted to have a snappier / more responsive / smooth ROM instead of feature-rich slow/laggy ones. - See OP.
To clarify: 2.3.x-based ROM's only.
Thanks anyway.

mobilefirmware.com/index.php?route=product/category&path=7618_7654
Jó ez a defy+

retekevo said:
mobilefirmware.com/index.php?route=product/category&path=7618_7654
Jó ez a defy+
Click to expand...
Click to collapse
Bizony-bizony

erdnuesse said:
Thanks, but this thread is GB-based ROM's only.
I wanted to have a snappier / more responsive / smooth ROM instead of feature-rich slow/laggy ones. - See OP.
To clarify: 2.3.x-based ROM's only.
Thanks anyway.
Click to expand...
Click to collapse
Last CM7 ROM`s Epsy is custom kernel & camera work.
But that rom have a wifi bug.
http://defy.wdscript.fr/defy-cm7-releases/
Sorry For english.

defy
ToMpI97 said:
Bizony-bizony
Click to expand...
Click to collapse
jo de melyik megy onnan ?

jalal-jap said:
Last CM7 ROM`s Epsy is custom kernel & camera work.
But that rom have a wifi bug.
http://defy.wdscript.fr/defy-cm7-releases/
Sorry For english.
Click to expand...
Click to collapse
M on build number 4.5.1-134_DFP-231, (BL7) Unable to install any of the custom gingerbread Rom, You said Epsy Last Rom worked for you... can u tell me which ROM and what was the wxact procedure. M stuck on stock ROM.. It's laggy and battery hungry.. So please any one can assist me out of here.

Niteeshkanungo said:
M on build number 4.5.1-134_DFP-231, (BL7) Unable to install any of the custom gingerbread Rom, You said Epsy Last Rom worked for you... can u tell me which ROM and what was the wxact procedure. M stuck on stock ROM.. It's laggy and battery hungry.. So please any one can assist me out of here.
Click to expand...
Click to collapse
last Cm10.1 Quarx is good.
http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/cm-10.1-20130607-NIGHTLY-mb526.zip
CM7--> Set default boot to 2ndboot
http://defy.wdscript.fr/jordan-nightly/CM72-20121126-NIGHTLY-Defy.zip
CM9--> Set default boot to 2ndboot
http://defy.wdscript.fr/defyplus-cm9/CM9-NIGHTLY-121118-Defy+.zip.md5sum

http://forum.xda-developers.com/showthread.php?p=15073332
Confirmed working. :good:

Well, sorry for huuge delays, but I am now on MoKee 34.1 because Rom lags or responsiveness is no longer an issue on Android 4.3
(OK, i missed some features as well)
I might remove the restriction of GB based Roms, but basically every 2nd Boot Rom works so i might collect only Rom trees, no single versions. Any opinions on this?
Sent from my MB526 using xda app-developers app

I have BL7 and i have blocked for few days in rom 2.3.6 4.5.1-134_DFP-231.
Then i have rooted it by install fixed sbf, and found a good sbf MistyOS-BL7-4.1.2.sbf (if any one want it i will upload it)
this fixed sbf install CM10.1 and u can make it a start point to install CM10.2 and CM11
Now i have CM10.2 work fine, just battery charger only with computer

[Q&A][FAQ] PAC-man 4.3

This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE

wedgess said:
This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE
Click to expand...
Click to collapse
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??

arc_n_krizt said:
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??
Click to expand...
Click to collapse
Finally some one who uses the Q&A.yes it should support AOKP/CM themes.

I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.

setup wizard pac-man
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1

ghostmirror said:
I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.
Click to expand...
Click to collapse
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
dimmalimm said:
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1
Click to expand...
Click to collapse
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.

i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance

Bagne said:
i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance
Click to expand...
Click to collapse
See I'm pretty sure its the kernel giving random reboots. But with LuPuS or Fusion kernel, WiFi and Bluetooth will not work on 4.2.

Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?

Bobby2013 said:
Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?
Click to expand...
Click to collapse
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.

wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!

Bobby2013 said:
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!
Click to expand...
Click to collapse
Paranoid was last updated before 3.x kernels were released.
Sent from my PAC-ed LT18i.
Press the thanks button if I helped.

wedgess said:
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.
Click to expand...
Click to collapse
I instal the ROM with full gapps and it is running fine now. In one day of testing I got one fc and one random reeboot. Thanks for the info.
Sent from my Xperia Arc S using xda app-developers app

wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
yea do this as soon as possible. 2.6 kernel + cm10.1 = Super Awesome and stable
Sent from my Xperia Arc using xda premium

Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app

theNfan said:
Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app
Click to expand...
Click to collapse
Yes u can post here also. Comparing any 4.2 ROM to STOCK ICS, stock ICS would be the winner in terms of stability. 4.1 is the best if you want JB IMO. But 4.2 and especially PAC 4.2 has a lot more features, customization amongst other things. It doesn't matter on the kernel its going to be the same. This is why FXP stopped developing after CM10 for the XPERIA 2011 line-up. It will never be 100% stable as will any 4.2 ROM for Xperia 2011.

I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.

sinholueiro said:
I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.
Click to expand...
Click to collapse
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.

wedgess said:
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.
Click to expand...
Click to collapse
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium

jithuelad said:
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium
Click to expand...
Click to collapse
yes and that's instability my friend
Sent from my Xperia Arc S using xda premium

latest Custom Roms or Kernels available for htc one v

I'm not talking about which is best as per the rules.,
Just want to know which are the latest Kernels and Custom roms are available that can be flashed easily for HTC ONE V.
so i can compare and flash them .
Do help , im new to this.

funrockerz said:
I'm not talking about which is best as per the rules.,
Just want to know which are the latest Kernels and Custom roms are available that can be flashed easily for HTC ONE V.
so i can compare and flash them .
Do help , im new to this.
Click to expand...
Click to collapse
If we are talking about Sense
There are 2 kernels: Titanium-KISS and Charm-KISS (which is pimped up Titanium-KISS)... for now Tk is the best, cause ChK is in developing process and few thing may causing problems (for unknow reson, when I've flashed new adreno drivers, ChK was lagging games, sometimes as much, that I was made to restart my phone by power button)
We have 4 ROMs: myONEv (light Sense, development has stopped due to the fact, that there's nothing more to do with this ROM to make it better ), mySense (full Sense, same thing as with myONEv), and two ROMS that are in development - HTC Droid and Ignorance. They are all ICS.
We are wainting as doga will make his Sense 5 JB ROM ready for daily use
If we are talking about non-Sense
We have Hellboy kernel... and that's the only well-workin non-Sense kernel
And we have one ROM that can be use without bigger problems - Shpongle
And that's all

Kernal or Rom??
My primary objective is to speed up my mobile performance,
Do i need to flash Rom , or any directly kernel can solve my problem , example - primo u (kiss) .
i'm noob in this , do tell the procedure and links how to flash it in easy steps

funrockerz said:
My primary objective is to speed up my mobile performance,
Do i need to flash Rom , or any directly kernel can solve my problem , example - primo u (kiss) .
i'm noob in this , do tell the procedure and links how to flash it in easy steps
Click to expand...
Click to collapse
Ignorance V4 + TK is fast and smooth
And I won't U give any links, because everything U need is in ours phone section. A little bit of thinking, searching and reading won't hurt U!!!

Thanks i found this
parkourz said:
Ignorance V4 + TK is fast and smooth
And I won't U give any links, because everything U need is in ours phone section. A little bit of thinking, searching and reading won't hurt U!!!
Click to expand...
Click to collapse
Hey dude , i searched this forum , i got this :http://forum.xda-developers.com/showthread.php?t=2400633&highlight=ignorance+v4
but i couldnt find the download link for ignorance and TK..

Titanium kiss
parkourz said:
If we are talking about Sense
There are 2 kernels: Titanium-KISS and Charm-KISS (which is pimped up Titanium-KISS)... for now Tk is the best, cause ChK is in developing process and few thing may causing problems (for unknow reson, when I've flashed new adreno drivers, ChK was lagging games, sometimes as much, that I was made to restart my phone by power button)
We have 4 ROMs: myONEv (light Sense, development has stopped due to the fact, that there's nothing more to do with this ROM to make it better ), mySense (full Sense, same thing as with myONEv), and two ROMS that are in development - HTC Droid and Ignorance. They are all ICS.
We are wainting as doga will make his Sense 5 JB ROM ready for daily use
If we are talking about non-Sense
We have Hellboy kernel... and that's the only well-workin non-Sense kernel
And we have one ROM that can be use without bigger problems - Shpongle
And that's all
Click to expand...
Click to collapse
Can you pls tell me.. where can I find titanium kiss??

ranjithm said:
Can you pls tell me.. where can I find titanium kiss??
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=1765687