Develop Bugs

Car Dock Kit

http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
REVIEW:
Got the dock today. Gotta say, not too bad. Although I don’t really think it’s worth more than about $25 tops. The build quality is ok. Everything is plastic, but it feels kind of light (the suction holder). Guess that’s a good thing if it’s being mounted to the windshield.
What’s included: Phone Dock, Suction Holder, Car Charger, Sticky suction pad (to use on your dash)
Suction Holder
There are 3 main components to this. The suction it pretty heavy duty. Probably better than my Garmin windshield mount. Once positioned on the glass, there’s a lever you push down drawing the air out making for a pretty good and strong contact. To release it from the windshield is just as easy. Just pull the same lever up to release.
The holder allows for full 360 rotation of the phone. Loosen the round knob to position and tighten. Once tightened, it’s pretty snug.
Where the phone dock connects, the suction holder has a little spring loaded push lever that’s used to clamp the phone dock to the holder. Same method is used to release the phone dock.
Phone Dock
Again, it’s pretty light. I wouldn’t say it’s feels cheap but just really light. The phone fits in pretty sung. It’s definitely not going anywhere. The dock also has a cut out for the camera, which is nice if you want to take pics of the road or maybe even a video of the guy in front of you with a lowered Silverado with a mural of his trunk on his tailgate 
Once the phone is in, the bottom end of the phone dock slides in and out making the usb contact. On the back of the dock, you have a micro usb port for charging and a 3.5mm line out jack. My only concern is with time, this portion will get loose. Seems like there’s 2 positions this click into as you slide it one way or the other.
Car Charger
It’s a micro usb car charger. Nothing more to say. Always good to have a spare one.
The dock definitely DOES NOT accept the phone with any cases. Don’t know about skins though. It’s a pretty sung fit with. Going to head over to TMO sometime this week and pick up the a ZAGG Dry application skin and see.
Figured it would, but as soon as you slide the plug from the dock into the phone, it goes into car mode right away, even without it being plugged into a power source. This can be deactivated by going into notifications and clicking Deactivate Car mode.
All in all, I’d have to say I’m pretty pleased with it. Not really pleased about how much it costs, but hey…It would have been nice for them to include an audio cable with the package. I bought this to replace my older Garmin Nav. Figure it’s much easier having this than traveling with the Garmin.
Update: Looks like this is going back. The line-out doesn't work. Getting no sound

smellmyfingers said:
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
Click to expand...
Click to collapse
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?

Thinking of picking this up:
http://www.ebay.com/itm/Exogear-Exo...ccessories&hash=item588ef6bfb4#ht_4693wt_1270
Seems like a decent quality holder that will work no matter any case I use.

luckyduck69 said:
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?
Click to expand...
Click to collapse
Nope. Makes sense, T-Mobile just released the phone so they hiked up all prices on "new" accessories. It's all naming/branding my man.

Looks nice...if u get it post some pics please.
I have one but makes too much noise when the car moves.
Tmo Galaxy S2

http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.

Was feeling frisky so picked it up at the store with the phone. Works great but the phone is held rather tightly and requires two hands to remove it when getting out of your car. Might loosen a bit over time, but a PITA for now. Phone also recognizes that this is a car dock (as opposed to desktop dock) and kicks on the VoiceTalk app automatically. Kind of nice.
-- edit --
Used a universal on my last phone... have to say that having the charger plug into the mount directly is hands-down worth the extra money. I hated having to find the dangling end of the usb cord every time I got in my truck... especially in the dark. With the made-for-it mount, you sit the phone in the mount and then slide the bottom part up which engages the charge and locks in the phone. All with one hand.
-GP

Dsmwookie said:
http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.
Click to expand...
Click to collapse
Have one and the best part about this mount is that it sticks to almost part in my car. Aside from the really curved parts.

Bought my first car dock for my old Vibrant few months ago, now have to get it again for my new SGS2. Like before I am getting OEM directly from Samsung website. Not sure what TM sells but the one I saw in their store looks pretty crappy from some 3rd party vendor.
Sent from my SGH-T989 using xda premium

The car dock... excuse me, "vehicle navigation mount" I got at the t-mo store two days ago is a Samsung-branded accessory. Guy had to actually open the box that UPS delivered that morning. Perhaps your store didn't have them yet?

Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium

esdwa said:
Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium
Click to expand...
Click to collapse
they should start getting them in. There OEM it should be in green and white box with samsung all over it

$64,000 question: will it work with a case?

What do you think of these Herbert Richter German made windshield mount? The mount is used in a Pioneer AVIC-F500BT GPS which is quite heavy.

ctkatz said:
$64,000 question: will it work with a case?
Click to expand...
Click to collapse
Probably not as it is made to fit the device snugly. This is why I use a pouch belt clip as I use my phone all the time for navigation and can't be taking a case on and off every time.

My Exogear mint will be here tomorrow. I'll let you know how it is. Cost $18 shipped off Amazon.
Sent from my SGH-T989 using xda premium

Some quick shots of my Exogear mount. Sticks to just about any surface and holds most phones in a case. Video is uploading as we speak.
---------- Post added at 06:27 PM ---------- Previous post was at 05:44 PM ----------
http://youtu.be/PApQgF4Q8Lk

cheap but nice mount
Just rec this mount ordered 2 one for my s2 and one fr my wifes vibrant really pleased with them ordered one more {ebay}Samsung Galaxy S II T989 Heavy Duty Windshield Premium Car Mount Phone Holder

Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!

Splaktar said:
Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!
Click to expand...
Click to collapse
Are you referring to mine? It works with a case on.
Sent from my SGH-T989 using Tapatalk

ProClip Vehicle Mounts available for pre-order

http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I like these mounts, the page just went up today. It's much better than the crap Verizon is pushing. Anyone else ever use these docks?

I can't tell from the pics but does the one that have the charger block the audio out?
Never mind, I can see the audio jack now in the pics.

i came on to post this...I just got an email from proclip confirming this. Ive used proclip in the past and they are of good quality
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854

I'm guessing only the adjustable holder will fit our phones if we have cases on them?

bowsersoulstar said:
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
Click to expand...
Click to collapse
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.

Roroco said:
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Click to expand...
Click to collapse
I'm looking at the same problem here. I've been using a holder with the 2 amp charger for the past two years with my Incredible and absolutely love it. I've never been able to get an extended battery because of how tight it slides in, though. I'll email them and ask but I might have to just swap in the stock battery for rides I know I'll need the juice.
Pros of using this are great, though. Because it's 2 amp charger I would get ~25% in about 20 minutes of driving with my Incredible with fast charging enabled in the kernel. GPS and Bluetooth for Google Maps would slow the charge down but would still give me a full charge from 20% to full in an hour. With Cyanogen I would set my bluetooth to only turn on when connected to a wall charger so I'd slide this in and my buetooth would turn on and connect to my car automatically. Last but not least, your wires are all tucked away! Very clean look.

Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?

nomisunrider said:
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
Click to expand...
Click to collapse
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.

Roroco said:
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Click to expand...
Click to collapse
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.

nomisunrider said:
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
Click to expand...
Click to collapse
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.

My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
Indeed the added battery won't make it work in 512324. Our adjustable holder listed with the Galaxy Nexus listing might work. Our custom holders are made for the device as it comes out of the box, and indeed any added thickness will make it not work in our custom holders.
Click to expand...
Click to collapse
So I guess not?

Roroco said:
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
Click to expand...
Click to collapse
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.

Mooem7 said:
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
So I guess not?
Click to expand...
Click to collapse
Most extended batteries tend to add a lot of bulk (more than cases sometimes). The person who emailed you back may not be aware that the GN's extended battery adds about 1-2 mm of bulk to the bottom half of the phone.
Since the holder is a slide-in type, I can't see this being 'millimeter-tight'. Don't take my word for it but I'm willing to bet that this will fit even with the extended battery on.
I guess we won't know for sure until someone gets the fitted holders and try it though. I'd try, but I've a case so the fitted ones do me no good for sure.

nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
80 bucks for that dock. Ouch. Good concept, but that is a bit rich.

I wish you could buy these at a store. I've already got the whole set for the Nexus One and I've been waiting for the GN mount. I just added to my cart and it's an extra $20 in shipping (to Toronto). So after duty at the border I'm looking easy at $60 just for that one piece of molded plastic. Yeah the mount is great, but that's seriously expensive.

I've used their cases for the last 2 years, nexus s and thunderbolt, and they are great. I still have my Nexus S holder and the picture of the one on their site for the GNex looks like the same style, if so it should work with the extended battery. The slide in case is tight on the sides but leaves a gap behind the phone, see attached pic. The phone slides into that groove and the groove itself is very thin so it doesn't appear it will interfere with the rear battery cover at all.

Proclips is a great solution. I've used it for my car for years. I used them in 3 different cars. Pricey however, it works very well. A+

Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse

Hi
For those in the UK... just ordered an active mount from http://www.mountonus.com/
£59.99... bit steep but I guess thats the price you pay for a nice phone-specific/car-specific mount!

nomisunrider said:
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
It was to be expected. They are not going to design a niche product for a phone until it sells consistently in the millions. That said... Creating a Micro USB small swing arm to make it universal should be too hard....
If I feel industrial, I might see what I can make on my own.

Best Car Dock for LTE Nexus with Case and Extended Battery?

I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?

check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.

FYI I saw someone mention using the standard Garmin nuvi suction cup mount, with a GN in a case it does seem to fit.
Sent from my Galaxy Nexus using XDA App

i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well

Javillanueva67 said:
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Click to expand...
Click to collapse
This thread is about the verizon nexus. You say you have the european samsung dock with the pogo pins and the verizon phone fits in it?
If so, do the pins line up and work to put in in car mode?

I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk

p.s. I have the extended OEM battery and I also have the generic car dock (no 3 pins) and it fits no problem.
Sent from my Galaxy Nexus using Tapatalk

I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can

ProClip adjustable width mount is what I'd recommend

bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
I ordered the X-grip mount with a medium size arm and the adhesive rubber ball base(I plan on keeping my car until its run into the ground) on January 11th.
Soon after ordering they informed me that the base wasn't in stock but it would ship out in 1-2 weeks. 2 weeks past with no word, then he said it would ship out at the end of the week. Still no shipping
I figured CS people would know not to give unrealistic ETA dates(especially when ram-mount makes the damn things themselves), especially over and over again, stringing the customer along...

rickt said:
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Let us know when you get it because I read a lot on the thread about the 3-pin that some people got burned by claims of the docks having 3 pin connection when they actually didn't. Keep us updated!

bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
Can it swivel to horizontal mode? Currently, this one seems to be the best.
jcwarren217 said:
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
Click to expand...
Click to collapse
I'm really tempted. Both options above are expensive. I was worried that the attachment thing might look like ****, but from the pictures in that thread, it doesn't look too bad. Same question though, can I turn it to landscape for Navigation? Also, how sturdy is the connection? Will it fall off as my car hits a bump or something?

acr89 said:
ProClip adjustable width mount is what I'd recommend
Click to expand...
Click to collapse
+1 to ProClip! They have a mount that can adjust with different cases, and it's very sturdy. The one I have mounts to my vent though (I prefer this anyway since my windshield is so...sloped). They are kinda pricey also, but they don't look too bulky and are specifically made for your car model. I love mine.

Would like to bump this thread to see if anyone else had suggestions for good universal car mounts/docks that will work with a GNEX in a case.

Samcobra said:
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
Click to expand...
Click to collapse
try the iBolt pro dock alumina... this car dock works with just about any phone, and especially works great with the galaxy nexus.... this cardock allows you to place it on either the windshield, dashboard, or air vent since extra pins are supplied to place the dock there and theres no need to remove your case from your phone... which is a god send.. it only cost me about $35 on amazon, so i cant argue with the price... i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...

SNNTEC said:
i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
Click to expand...
Click to collapse
You're past 10 posts, pics please!

Car Mount Vehicle Windshield Holder for Samsung Galaxy S3 S 3 SIII i9300

Has anyone puchased one of these?... Any reviews?.... Does it work with a gel skin?
Thanks. Trying to find a good car mount... Thanks.
http://www.ebay.com/itm/Car-Mount-V...290868?pt=PDA_Accessories&hash=item416751d6b4

That is really cheap..
Sent from my SPH-L710 using xda premium

I'm looking for a good quality windshield mount as well. I was using this Kensington mount with my Evo and it worked really well, but it doesn't open wide enough to hold the GS3. $3.99 sounds suspiciously cheap...

4 bucks free shipping, sounds to cheap to me.

I am also looking for a car mount. I am coming from a Droid X and liked that the power cord could be just left in the dock and the phone connected to the dock. My wife has a Razr MAXX which has the same feature. I was looking for a mount like it for my S3 but haven't seen any like it.
---------- Post added at 12:51 AM ---------- Previous post was at 12:34 AM ----------
vader699 said:
I am also looking for a car mount. I am coming from a Droid X and liked that the power cord could be just left in the dock and the phone connected to the dock. My wife has a Razr MAXX which has the same feature. I was looking for a mount like it for my S3 but haven't seen any like it.
Click to expand...
Click to collapse
Oops should have searched more. I just found this
http://forum.xda-developers.com/showthread.php?t=1725013
Looks like I'll be getting this one.

I bought the iOttie one off of Amazon and like it a lot.
Very secure.

Stay away from the bendable style mounts. I had a universal similar to that and it would bounce around so much while driving. Makes it hard to see directions in nav.

_Epic said:
That is really cheap..
Click to expand...
Click to collapse
Agree. And we don't mean inexpensive (although it is that too), we mean CHEAP (as in quality).

Get this one: http://www.slipgripcarmounts.com/Sl...ier-To-Be-Used-While-No-Case-On_p_130474.html or this one if you have otterbox commuter: http://www.slipgripcarmounts.com/Sl...Using-OtterBox-Commuter-Case---_p_130841.html
I've had it for my Fascinate with commuter and it worked flawlessly for almost 2 years. I just placed an order for S3 one.

I read the ExoMount is great

vader699 said:
I am also looking for a car mount. I am coming from a Droid X and liked that the power cord could be just left in the dock and the phone connected to the dock. My wife has a Razr MAXX which has the same feature. I was looking for a mount like it for my S3 but haven't seen any like it.
Oops should have searched more. I just found this
http://forum.xda-developers.com/showthread.php?t=1725013
Looks like I'll be getting this one.
Click to expand...
Click to collapse
Hey thanks. I was in a similar boat, Droid X to S3, and didn't want to buy any of the VZW accessories until I could get home and assess the state of 3rd party accessories. Looks like I'm likely getting this one too!

CuedUp said:
Hey thanks. I was in a similar boat, Droid X to S3, and didn't want to buy any of the VZW accessories until I could get home and assess the state of 3rd party accessories. Looks like I'm likely getting this one too!
Click to expand...
Click to collapse
I picked up one of the Infuse mounts for the S3 off eBay. My only concern is since the corners are a different shape the mount presses fairly firmly on the phone in those localized spots. Yes, the phone is very secure but I'm worried that over time the rubbing will begin to mar the phone.

I like the look of the Slipgrip mount but have always been concerned about a particular aspect of windshield mounting: how does the phone hold up to 2 hours of driving in the midday sun?

paulchinnz said:
I like the look of the Slipgrip mount but have always been concerned about a particular aspect of windshield mounting: how does the phone hold up to 2 hours of driving in the midday sun?
Click to expand...
Click to collapse
Driving from Syracuse to NYC tomorrow... I'll let you know. Ha. Much more than two hours

woodant said:
I bought the iOttie one off of Amazon and like it a lot.
Very secure.
Click to expand...
Click to collapse
I also have the iOttie mount. It's secure but too cumbersome to get the phone in and out of it (which I do a lot while driving).

I have two Exogear Exomounts, one for my desk and one for my car. They are by far the best mounts I have ever used. They can fit the phone alone or with a case, I would defiantly recommend..
Sent from my SPH-L710 using xda premium

+1 for the infuse car mount.
Fits perfectly, cheap, charges and has aux out.

tgmorris said:
I picked up one of the Infuse mounts for the S3 off eBay. My only concern is since the corners are a different shape the mount presses fairly firmly on the phone in those localized spots. Yes, the phone is very secure but I'm worried that over time the rubbing will begin to mar the phone.
Click to expand...
Click to collapse
I returned mine already. I felt it was to tight to snap in.
I think I will just find a generic one.
Not much available specific to the S3.

I have the exo gear mount and its awesome. I would give it a try if I were you. You can get it off of amazon so if you don't like it you can return it.

exo gear exomount is awesome..so simple and it just works...im getting another one.

Best Car Mount I've used yet...and it's $7.

Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.

Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
I love this thing, it grips the device great, and the suction cup will go almost anywhere you want. I have mind suctioned to the top of my dash of my 08 dodge caliber. Even tho the dashboard is textured with some pretty deep ridges it sticks great!
Only con i would give it is that the grip is a little too tight, making one hand operation difficult. you can remove the device from the mount with one hand, however installing the phone into it usually requires use of your second hand to open the drip far enough. However it is a comfort knowing that it moto x isn't going to fall out.

SubliminalME said:
the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Teksu said:
Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
Click to expand...
Click to collapse
My local Costco was selling a 2 pack of mounts that looked identical to this for $25 (after $5 instant savings) about 2 months ago. I'm not sure if they still have them, but of they do they aren't prominently displayed.
Sent from my Nexus 7 using Tapatalk

I think it would fit, actually.
Sent from my XT1049 using Tapatalk

Has it fallen off on you?
SubliminalME said:
Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.
Click to expand...
Click to collapse

SubliminalME said:
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Hey @SubliminalME, I recently picked one of these up, it does fit very well. Problem is that it either blocks the headphone jack or the charging port, depending on which way you put the phone in the mount. Have you found a way around this?

i bet you could drill a hole in the single mount pretty easily.
the better question (for me) is whether the phone can be positioned in the mount without blocking the camera. a windshield mount is only useful to me if i can use the camera. otherwise, it's going in a cupholder.

The Monoprice one is showing out of stock!! :/

UncleMike said:
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Click to expand...
Click to collapse
SubliminalME said:
I think it would fit, actually.
Click to expand...
Click to collapse
I ordered two of these and they came in the other day. Surprisingly, it fits well with the Seidio Dilex case. My concern was that there wouldn't be room for the integrated kickstand on the back of the case, bit there's just enough room for it.
I have an adhesive mounted Garmin-compatible ball (~17mm) on my dash that works perfectly with it.

i've got mine, but haven't taken it out of the box yet!

In for one
Thanks for the heads-up! Always have loved Monoprice and I can't bring myself to go the imagnet route (ie pop off the back) on the X. This should be a nice cheap compromise, especially since I already have the garmin ball installed in both my cars.

The best that I've ever used is the Tetrax Xway. PRevents the phone from overheating by clipping in front of the A/C, and works with nearly every phone/case combo. I've used it through my Droid Incredible, Galaxy S2, and Galaxy S4 GPE with numerous cases.
http://www.tetrax.com/us/products/iphone-ipod/tetrax-xway
https://www.youtube.com/watch?v=awh6QP8-BBE