replacing screen glass - Xperia Play Q&A, Help & Troubleshooting

Hi All
had a bit of a mishap this morning and dropped my phone off the couch, normally it would of landed on the floor (carpet) but it bounced off my morning cuppa so i now have an Xperia play with a cracked screen
luckily (sort of anyway) the main chip is on the side and the screen only has 4 very clean cracks across it and it is still perfectly smooth and still works fine
ive looked on ebay and it seems you can get the replacement glass for around £20, my main question is it hard to replace as they all come with some tools and a guide, i am very good with fiddly things so i would be happy doing it but i dont want to waste £20 if it ends up not looking right
so any advice please guys

Sorry I can't give you a link but try to.search youtube on how to.dissamble your xplay model. You need to take the whole phone apart to get to the damn screen. A very long looking process
Sent from my R800x using XDA

Check with your carrier and ask about repairs outside of warranty. The carrier I'm with, Rogers, pays a subsidy for repairs that warranty doesn't cover. For example, screen costs 50 bucks at a repair centre, they cover it. Main board costs 150, they make me pay part of it.
Just a shot in the dark, but if a greedy company like Rogers will do that, yours might too.
Sent from a Galaxy far, far away

Hi,
unfortunatly my phone contract is for a Samsung Galaxy S as they didnt have the XP in stock at the time so i took it home sold it on ebay and purchased an XP so i dont think they will help
ive seen the vid on youtube and it seems a long and fiddly process to remove the screen so i think i will pass and come payday sell the cracked one and just buy a good condition new one looking on ebay it will end up costing me less then £50 so its not too bad

Dude, i dont know if is the best thing to do but i disassembled my XP and it is not hard, the only problem that i see is the dusty, it enters on screen and you dont realize, after assembled you will see and cry. Now deppending of the time of use and price i m a candidate to buy your cell . By any way if you decide change by your self take a look on the advice of the Hair Cleaner, it softens the glue that hold the screen.
And do not tighten the screw of the mother board too much, this will save your gamepad.

Related

Broken screen/digitizer

I unfortunately dropped my Desire this morning and managed to break the glass/digitizer.
Can anyone recommend a repairer preferably in the north East, UK.
I have seen replacement digitizers already fitted into the front housing for £19.99 on a well known auction site.
Looking at videos on how to replace the digitizer it doesn't look too difficult just looks intricate and unsure if i should have a go at replacing or just take it to a local repairer.
What's everyone's opinions?
Thanks
In the past I've found buying the digitizer and then getting a shop to fit it best for me
Sent from my HTC Desire using xda premium
i did it last week, not bad for a copy digitizer.
little fiddly but if u take your time and be careful, you should be fine
there is a photo show on youtube somewhere, gives u a better breakdown.
ayu452.blogspot.com/2011/11/htc-desireg7-screen-replacement.html
found this even better than the one i saw originally...
its a video
youtube.com/watch?v=sXZqIjtFoAU&feature=related
I did exactly the same a few months ago and took the route of buying a replacement and fitting myself.
I have to be honest there were a few moments when I thought that was a mistake and I should have taken it to a shop. I found it VERY fiddly and was convinced i was going to break it, the insides are really delicate.
If you decide to do it, get as many instructions from google, youtube as you can and read/watch them all before starting. I seem to remember the ones I followed ware unclear at a certain stage. The ones from ayu452 look good tho. Have the right tools and allow plenty of time. Good Luck.
Just wondering if its worth buying this to avoid removing the digitizer from fascia?
http://www.ebay.co.uk/itm/220871890...X:IT&_trksid=p3984.m1423.l2649#ht_1674wt_1037
Whats peoples opinions on it?
Yeah may as well. Will make it easier. I may even do that just to get rid of scratches on digitizer and fascia
Ive ordered that digitizer with fascia off above auction website link
A local phone repair guy said he would fit it for £20 just gotta decide if i should let him fit it then if he messes up its his responsibility ??
That was my reason behind doing that. Still much cheaper than if you asked HTC to do it.
Digitizer arrived next day in post.
Looks good quality with black surround rather than that bronze colour. Like it
Took it to my local phone repair guy who fitted it.
Hit power button phone booted up, one BIG problem.. the digitizer wasnt working!
He checked all connections again and concluded the digitizer was DOA.
Not good and still without my phone.
Have let the phone guy order a digitizer himself as im going to have to return faulty one for refund.
Hopefully it should be sorted today.
Good luck.
New digitizer fitted and working perfect!
Credit to Paul ThePhoneGuy repairer in Durham who sorted it for me.
Just realised I need a new speaker now. It must have damaged it when it was dropped.
Thats a minor job though. Just pleased phone is working again.
Good news!
rootSU said:
Good news!
Click to expand...
Click to collapse
Yeah. Just pleased to have it back working again.

n7100 owner in the USA, dropped my phone and cracked screen

Hello fellow n7100 owners. All input welcome, but especially from other US residents who own n7100s.
So I did something stupid this weekend. I wore these loose shorts with loose pockets and dropped my phone when I sat in my car.
The screen is cracked now at the top right. It turns on just fine, works as usual, and the touch sensitivity also seems to be normal in the area of the crack. So it seems like the problem is just cosmetic at this point, , and in a darkly lit room, it's hard to even see the cracks when the screen is own.
But it's bothering me to look at it, I really liked the way this phone looked and kept my screen and everything in absolutely immaculate condition before this. What are my options?
I figure I can't send it to samsung, since I bought it off ebay, and obviously it's not a domestic galaxy note 2.
I'm thinking self repair is a no go, unless it's very easy and doesn't require a lot of tools because I am not handy at all with those types of things. I was thinking of taking it to a local repair shop that I found online, but I don't know how much it's gonna cost...and if I do take it there, if I should buy the parts I need beforehand so they don't overcharge me on those.
Any thoughts?
Anyone? Someone?
I wouldn't even think of trying it yourself. I wouldn't even try it myself. Your out of luck when it comes to warranty as you bought the device second hand. Your best bet is to find a store like you have and get an estimate
If I am correct, I know you could go to Samsung and let them repair it. Just say you'll pay for it.
I changed only the glass on my 2nd s3 it cost me £15 for the glass and £20 for the heatgun. Check out youtube for tuts
Sent from my GT-N7105 using xda app-developers app
Call up mobiletechvideo.com. they're located in Texas. They swap out emmc chips in Samsung phones so I would assume they can do screens too unless they can't source them.
Sent from my GT-N7100
I got my note 2 as a gift, but when I received it, the screen near the front camera was cracked out the box. So, called Samsung service centre, they say they wouldnt repair it because it was out of their warranty, and if I wanna fix it, it will cost approximately $200 dollars (converted from Indonesian Rupiah).

Need advice with a bad digitizer from ebay

http://db.tt/ANyYkLH1
That link is a video that I filmed with my amaze. I made it to prove to a guy that sold me the digitizer from ebay that I didnt damage it during installation. Basically, I installed the digitizer assembly last week, and I noticed the dead spot when texting a friend, and everytime that I try to type thw S or E key, a W would pop up, and also, while in recovery, I cant select any options that appear in the spot that is, in this video, a horizontal line where the day of the week is displayed on my weather widget in the lock screen.
I informed the guy of this problem, and he offered me $50 partial refund (it cost me $150) or if I can remove the assembly without damaging it, he will exchange it. Here is the problem, if I do damage it in the slightest, not only will he not warranty it out, but I would have to just throw my phone in the trash, because $300 is too much money to pay for just the screen. So I told him that I cant take the chance of removing it if I will be penalized for damaging a defective screen. So I was thinking about sending him that link to show him that the screen is good, the amoled isnt pierced, and the ribbon isnt damaged. I mean, I would know if I damaged the assembly, because I installed it myself, besides, unless he is accusing me of damaging this digitizer/amoled assembly with psychic powers professor x style, he has to know that he is just discouraging me to pursue a refund/exchange. I even offered to send him my phone, so that he can see for himself that its defective, yet not physically damaged before its removed. If he damages it during removal, atleast he will know that it was originally defective when I recieved it, before I ever installed it.
This is doing the same thing that happened to a friend of mine when he didnt line up the lcd to the digitizer, and I paid so much for this assembly for the very comfort of knowing that it was done right. He still insist that he tested that screen before he shipped it (he claims that all digitizer assemblies are tested before being shipped on his ebay page), but from watching the video, atleast in my opinion, its pretty obvious that something is wrong here. I opened a case with ebay, but until june third, I cant escalate the case to ebay, and it says that I should try to work it out by ourselves, but he is stalling and discouraging me. I think this is all bs man. So if anyone has any advice on how to get this situation resolved, please chime in. I am stuck at a stalemate now. Plus, I need my phone fixed. Thanks.
cuiltheory said:
http://db.tt/ANyYkLH1
That link is a video that I filmed with my amaze. I made it to prove to a guy that sold me the digitizer from ebay that I didnt damage it during installation. Basically, I installed the digitizer assembly last week, and I noticed the dead spot when texting a friend, and everytime that I try to type thw S or E key, a W would pop up, and also, while in recovery, I cant select any options that appear in the spot that is, in this video, a horizontal line where the day of the week is displayed on my weather widget in the lock screen.
I informed the guy of this problem, and he offered me $50 partial refund (it cost me $150) or if I can remove the assembly without damaging it, he will exchange it. Here is the problem, if I do damage it in the slightest, not only will he not warranty it out, but I would have to just throw my phone in the trash, because $300 is too much money to pay for just the screen. So I told him that I cant take the chance of removing it if I will be penalized for damaging a defective screen. So I was thinking about sending him that link to show him that the screen is good, the amoled isnt pierced, and the ribbon isnt damaged. I mean, I would know if I damaged the assembly, because I installed it myself, besides, unless he is accusing me of damaging this digitizer/amoled assembly with psychic powers professor x style, he has to know that he is just discouraging me to pursue a refund/exchange. I even offered to send him my phone, so that he can see for himself that its defective, yet not physically damaged before its removed. If he damages it during removal, atleast he will know that it was originally defective when I recieved it, before I ever installed it.
This is doing the same thing that happened to a friend of mine when he didnt line up the lcd to the digitizer, and I paid so much for this assembly for the very comfort of knowing that it was done right. He still insist that he tested that screen before he shipped it (he claims that all digitizer assemblies are tested before being shipped on his ebay page), but from watching the video, atleast in my opinion, its pretty obvious that something is wrong here. I opened a case with ebay, but until june third, I cant escalate the case to ebay, and it says that I should try to work it out by ourselves, but he is stalling and discouraging me. I think this is all bs man. So if anyone has any advice on how to get this situation resolved, please chime in. I am stuck at a stalemate now. Plus, I need my phone fixed. Thanks.
Click to expand...
Click to collapse
It'll be your word against his on weather you damaged it during install. EBay will probably stay out of it if his feedback on eBay is overall positive.
Afraid it sounds to me like your best option is to remove it carefully and go for the exchange. Or take his 50 and cut your losses.
Sorry, but that is how I see it going. If he has a solid eBay reputation, they aren't gonna force him to do anything.
Sent from my cell phone telephone....
kj2112 said:
It'll be your word against his on weather you damaged it during install. EBay will probably stay out of it if his feedback on eBay is overall positive.
Afraid it sounds to me like your best option is to remove it carefully and go for the exchange. Or take his 50 and cut your losses.
Sorry, but that is how I see it going. If he has a solid eBay reputation, they aren't gonna force him to do anything.
Sent from my cell phone telephone....
Click to expand...
Click to collapse
Yea, thats why I went with him, because his reputation is 99.1%, where mine is a 100%, but I only purchased items, so its really hard to get negative feedback from purchasing anything on ebay when all of your purchases are the buy now type, and your payment isnt declined.
So, what if I do remove the display without damaging it, could I send it to someone at ebay first to independantly verify that its a defect and not physical damage? Do you think that my video will suffice for evidence that no physical damage has occured? I mean, look, the screen displays fine, which these are so sensitive that if I pierced the amoled display, it wouldnt light up right? Then the glass, its not cracked, not even a scratch, so surely no physical damage there. The third possibility that he listed was a torn ribbon, but again, as I am typing this up on the phone now, if I tore the ribbon by installing it, surely it would either work, or not work right? I am not an expert, so my only recourse is applying logic using common sense.
What bothers me is that he knows that I bought this assembly to permamently install it, its not like removing a sim card. I am going to write him back and link him to the video right now. I dont know what else to say.
Well, I hope it works out for you. I just can't see eBay doing anything about it....and if they were gonna, probably take forever.
Sent from my cell phone telephone....
What country are you in?
Sent from my GT-I9100 using xda app-developers app
oL00No said:
What country are you in?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I live in the US.
http://return.phiconnect.com/id/ask_tronics
The guy told me that he doesnt want to separate the screen because if the cable rips, he cant prove that it wasnt already like that. I don't know, I just can't believe that there isn't a solution for this kind of problem. I need some objectivity here, am I just being paranoid? Its so easy to break these things, and if I damage it pulling it out, I wont get a refund or exchange, and if he would have really tested this thing, then I wouldnt have recieved a defective digitizer, and I would have no reason to remove it. Thats what really bothers me, I shouldn't even have this problem, but then again (might as well admit it before someone else says it), life isnt fair.
By the way, the guy said to process my refund or exchange by clicking on that link above, but ebay says not to respond if there is an offer to complete a transaction outside of ebay. I clicked on the link and saw the ebay logo, but the words are really fuzzy and I cant make em out. Anyone ever seen a page like this? Is this what the official ebay return page looks like? I cant get used to the screen like this, so if I have to accept the $50, then essentially I just lost $100 because I will have to buy another one, or sell this thing for $450 to be fiscally neutral.Thanks for answering back, I dont have much experience with ebay.
If it were me.. I would do a partial return and get the 50.
I don't know how hard it is to take the digitizer off but my past experience with ebay related purchases are never great. If you do manage to get it off without damaging it I'm sure he might even throw up the excuse that it is damaged on his end, and you will have to do an insurance claim through whoever did the shipment.
Speaking on the ebay site, that is definitely not a legit ebay affiliated site.
It's probably his own site use to track his sales and whatnot. I would say it's fine to use but dont put any personal information into it.
That first portal with item # and your ID seems ok to put in, but I wouldnt do any passwords or **** like that.
8Fishes said:
If it were me.. I would do a partial return and get the 50.
I don't know how hard it is to take the digitizer off but my past experience with ebay related purchases are never great. If you do manage to get it off without damaging it I'm sure he might even throw up the excuse that it is damaged on his end, and you will have to do an insurance claim through whoever did the shipment.
Speaking on the ebay site, that is definitely not a legit ebay affiliated site.
It's probably his own site use to track his sales and whatnot. I would say it's fine to use but dont put any personal information into it.
That first portal with item # and your ID seems ok to put in, but I wouldnt do any passwords or **** like that.
Click to expand...
Click to collapse
I have no clue how this guy has such a good reputation, I mean, does that short video clip not demonstrate that the glass doesnt have a single scratch, much less any cracks, the amoled display is perfect, so I obviously didnt pierce the display, and well, I dont think that the screen would show any sign of life if I tore the cable. He is pulling sneaky tricks to avoid refunding my money. I dont even want an exchange from him, because I don't want to deal with this type of situation. I have to wait until June 3rd to escalate to ebay, and I am going to stand my ground.
Hell, I really dont have a choice, it says right above his message that if I complete any transaction outside of ebay, I forfeit my buyer protection from ebay.
Thanks to everyone who responded to my thread, ebay sided with me, and told me to send the item back, and I would get a full refund, so I printed the shipping label that they supplied me, and I tried to be careful removing it, packed it up and shipped it last thursday, and just a few hours ago, it was delivered, ebay refunded the money to my prepaid credit card. So while I wait for the funds to post, im wondering, should I just keep the money, and just sell the phone without a screen, or is it worth ordering a digitizer from a different guy and try it again? You think that I could get any money for the motherboard and all of the pieces, or should I just put it back together and sell my htc amaze (what im using atm)? Thanks again for the advice!
cuiltheory said:
Thanks to everyone who responded to my thread, ebay sided with me, and told me to send the item back, and I would get a full refund, so I printed the shipping label that they supplied me, and I tried to be careful removing it, packed it up and shipped it last thursday, and just a few hours ago, it was delivered, ebay refunded the money to my prepaid credit card. So while I wait for the funds to post, im wondering, should I just keep the money, and just sell the phone without a screen, or is it worth ordering a digitizer from a different guy and try it again? You think that I could get any money for the motherboard and all of the pieces, or should I just put it back together and sell my htc amaze (what im using atm)? Thanks again for the advice!
Click to expand...
Click to collapse
Me ... for the money I would look online for a used one in your local area, online classifieds, etc. At least then if there's an obvious problem you can see it before handing over cash. I don't know about your area but the S2's come up pretty regularly where I'm at in the $125-200 price range. Everyone is onto the S3/4 band wagon. With your current phone ... if nothing else you'll have a spare for parts.
Aimless Rambler said:
Me ... for the money I would look online for a used one in your local area, online classifieds, etc. At least then if there's an obvious problem you can see it before handing over cash. I don't know about your area but the S2's come up pretty regularly where I'm at in the $125-200 price range. Everyone is onto the S3/4 band wagon. With your current phone ... if nothing else you'll have a spare for parts.
Click to expand...
Click to collapse
I live in jacksonville, florida, and typically s2's go for atleast $200-$225, sometimes even $275 if the screen and bezel don't have a bunch of scratches, so I have been looking online for those digitizers that include the midframe, and they are around $175, but it seems pike all that I have to do at this point is transfer the motherboard, front facing camera and earpiece/mic jack, and it would be mint. I just sanded down the bezel since it was all apart, and what a pita to get that chrome off, and make it all look uniform!
Btw, whats up with the led for the charging light? I never noticed it light up when I plugged it into charge. My htc amaze shines green when fully charged, and orange when charging. I already read that we dont have a notification led, but I see these tiny little round crystal looking dots next to the front facing camera, but no ribbon coming off of them, are those just samsung ricing out their phones like a civic with an exhuast tip?
I thought those were sensors.
Sent from my SAMSUNG-SGH-T989 using xda premium

Broken Screen Replacement Options!! Please help! :(

Hi,
I dropped my S2X today and broke the screen.
The picture is okay in the back.. but the glass on the front is broken. So, is it called digitizer or LCD? and how much should I pay to repair it? People are asking from $100 to $175!! And seriously, the price for the new phone when I bought outright was $150!!
I found something on eBay for around $15..
http://www.ebay.ca/itm/New-Black-Di...cement_Parts_Tools&hash=item3f1b029e5d&_uhb=1
So, is this what I am looking for? or something else?
I live in GTA, so I was thinking there might be more options to repair the thing in some store or something but no luck on Kijiji! Asking for 3 digits is insane!!
Let me know what should I do!
Thanks,
lex4ever said:
Hi,
I dropped my S2X today and broke the screen.
The picture is okay in the back.. but the glass on the front is broken. So, is it called digitizer or LCD? and how much should I pay to repair it? People are asking from $100 to $175!! And seriously, the price for the new phone when I bought outright was $150!!
I found something on eBay for around $15..
http://www.ebay.ca/itm/New-Black-Di...cement_Parts_Tools&hash=item3f1b029e5d&_uhb=1
So, is this what I am looking for? or something else?
I live in GTA, so I was thinking there might be more options to repair the thing in some store or something but no luck on Kijiji! Asking for 3 digits is insane!!
Let me know what should I do!
Thanks,
Click to expand...
Click to collapse
Well, the cost of a smartphone can easily be $500-$800, so paying only $100 to get it fixed can be a deal. I see people complain all the time that Apple charges $149 for Out-of-warranty work, when they "only" paid $199 for the phone. An iPhone can cost $649-$849, the "$199" paid is the on-contract, subsidized price.
And, if the design of Samsung's phones are similar to the iPhone, you may need more than just the digitizer. The iPhone 4 and newer have the Digitizer (the outside part that you touch) and the LCD (the inside part the displays the picture) fused together, as one piece. You cannot replace "just" the digitizer or "just" the LCD. You must purchase a "display assembly" - both pieces together, as a single unit.
When I check eBay for "T989 Display Assembly", I see many going for around $250.
Again, if people are only asking for $100 - $175 to fix it, I'd go for it. Consider it a lesson learned and try to be more careful with the device.
Another 100 and you can buy a new N4.
Sent from my cellular telephone
The glass is separate from the digitizer. If it is anything like the s3/s4/note2, the glass is attached with a layer of adhesive to the front of the entire lcd. You can order just the glass for $10 USD. It is possible to change. It just takes patience. You must heat up the front of the glass using either a heat gun or hair dryer in order to soften the glue that holds it all together.
Yes its a pain, but very doable. Look at the YouTube guides carefully. Heres a link for the white and the black glass both under 10 bucks on ebay.
http://pages.ebay.com/link/?nav=item.view&id=330905398170
http://pages.ebay.com/link/?nav=item.view&id=290795376084
If you aren't careful, you can and will crack your LCD, in which case you are SOL. Always keep the glass heated ( roughly 185 degrees ) and work slow prying upwards, not downwards.
Sent from my SGH-T889 using xda app-developers app

Cracked Screen? Repairing the Samsung Galaxy TabPro 8.4 LTE (SM-T325)

Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Not good when you crack your screen
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
Zakanam said:
Hey guys, I bought the Samsung Galaxy TabPro 8.4 LTE variant (SM-T325) and unfortunately, just after 2 weeks of use, my friend dropped it and cracked the screen and scratched the bezels. I live in the UK and I bought this tab online. I know dropping the tab is out of warranty and I have to pay for the damages but I have contacted Samsung which they referred me to some of their repair centres but with no hope as they couldn't replace/repair the damage because my tab is the LTE variant and it's not of European Region.
I'm pretty pissed that my beautiful TabPro 8.4 is cracked and I'd do anything to fix it.
I just want to ask you guys for advice on how I should fix my tab if official samsung repair centres here can't do it because they don't have the parts? Or is my best bet taking it to a repair centre in Asia (where it's most likely from)?
Thank you if anyone replies ;_;
Click to expand...
Click to collapse
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
The only and best advice i can give you is check Ebay, look up LCD & Digitizer for Galaxy Tab Pro 8.4 LTE, you should find it there. The best of luck Buddy..
Click to expand...
Click to collapse
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Wow.
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
LowaEastSide said:
Im sorry to read the situation the both of you are in, as for the first post i replied to i did mention the LCD & Digitizer, however doing the research on Ebay the Digitizer Cant be found, that really sucks, just makes me MUCH MORE aware of NOT dropping my device, they do feel really light a delicate, with that said I love watching movies on it in 1080p, the clarity is unbelievable. I'm loving this device, But on the other hand there isn't any development for it out, really sucks cause i was looking to switch it to the Google Addition of Android.. Or if a developer can cook up a Custom Rom from the S5 Operating System that would be SICKKK... That how i have my Note 3 running, exactly like the S5, its hottt... the best of Luck to you both, hope it works out. BLESS..!!
Click to expand...
Click to collapse
I actually replied to your thread about custom roms with something I was working on before the incident happened...its an extremely basic test build so its probably no where near what u want (no s5 setup) but if u want to test it out I posted the link in the other thread. I wish it was just my glass that was broken right now because it would already be fixed....I was able to find the digitizers on ebay althought there are only a few listings I'll post the lowest link below
EDIT: nevermind...probably should have checked my pm first. As far as the selinux function...if u go to "settings-general-about device" and scroll down to the very bottom u should see "se for android device" which will probably say "enforcing" although hopefully it will be set to "permissive" which would allow us to connect NTFS(WINDOWS) formatted hard drives to our device as well as other things
Zakanam said:
Thanks guys for replying, I totally appreciate it but yeah, my LCD itself isn't broken, just the glass so the touch screen digitizer is what I need. However, if I buy from eBay or from the given link, will the glass be of the same quality/made from the same thing? Cause the touch screen glass on the TabPro 8.4 feels so smooth and not cheap so I don't really wanna change that :/
And also, do you guys now if they sell the bezels? since they scratched too
Thanks again!
Click to expand...
Click to collapse
@Zakanam as for the quality of the part as far as I know most lcds are factory originals while most digitizers are usually aftermarket reproductions although I haven't EVER had an issue with any I've replaced as far as registering touches or smoothness. As I stated above device repair is part of what I do for a living although i'll admit I may have just been lucky...u will most likely have to wait until someone puts an 8.4 up for parts on ebay before u can find the bezels however I hope this helps
http://www.ebay.com/itm/Touch-Screen-Digitizer-Glass-For-Samsung-Galaxy-Tab-Pro-8-4-T320-T321-T325-/201077168569?pt=Other_Tablet_eReader_Accessories&var=&hash=item2ed12219b9
^CHEAPEST DIGITIZER ON EBAY
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
THEDEVIOUS1 said:
I hate that it happened to u too but if all u did was crack the digitizer glass then consider yourself lucky because that part can be found all over the internet for as low as $40 (i'll link to a site below but as the user above said they are also on ebay...although for a higher price)...how about I also have the lte version BUT I broke the actual lcd display and somehow managed NOT to shatter the glass (weird but true). The crazy thing is I didn't even drop it...just picked it up and it was cracked/bleeding inside...not even sure if its something I did & not looking forward to arguing with Samsung about it either not to even mention the fact that's its actually a hong kong unit. The ironic part is I actually fix these things for a living but I cant find the screen anywhere online yet...if u decide to get rid of it for whatever reason then I would be willing to purchase the lcd from u (assuming u didn't break both screens) for a reasonable price & in order to help u make your money back. I could also part it out & put it on ebay for u...the motherboard alone should get a pretty penny
http://www.parts4repair.com/touch-screen-digitizer-for-samsung-galaxy-tab-pro-8-4-t320-t325-t321-black/?ref=lexity&_vs=google&_vm=productsearch&gclid=CK-_8fLzhL4CFe5aMgodskEASQ
^cheapest link I found (I cant vouch for the credibility of the sute bit as I stated above the part can be found at mor popular places as well)
Click to expand...
Click to collapse
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
stoney73 said:
In the same predicament. The lcd display on my 8.4 LTE T325 is broken, but the digitizer still recognizes touch. Finding a replacement screen is a pain, especially in the UK. Only quote I've managed to get is for £169, which is more than what I paid for it on ebay....decisions decisions...
Click to expand...
Click to collapse
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
redpoint73 said:
Similar situation when I broke the screen on my Note 8. While glass was available at a reasonable price, the process to get it unglued from the digitizer looked too involved for me. The price for screen + digitizer was similar to the price of buying a new Note 8. So my solution . . . was to buy the Pro 8.4!
Click to expand...
Click to collapse
Lol. My solution was to buy the tab S 8.4 LTE. Still wondering whether it's worth fixing the tab pro or not
Hello, i broke my lcd a week after buying it and found only one place that has the digitizer and lcd as one unit. Its costly! $159.00 + $10.00 shipping from Singapore! here is the link
http://www.parts4repair.com/samsung-galaxy-tab-pro-8-4-t320-parts/
I did it on mine but proly could have found a new tablet for the cost! The repair was very easy.
Hi I have a similar problem but with a different tablet thr tab 4 7 inch which does not have gorilla glass so whatever glass is put in it does the tabpro have gorilla glass?
Anyway 2 days after buying it I sat on my tab 4 by accident while it was sitting in its box on my bed, the tablet just sunk to 1 side and collapsed in the box so I am hoping I didn't do any damage. Ive been so worried about it when I look at the screen and lcd thrre is no damage or cracks I can see is it possible the lcd at thr back of it cluld be cracked? Or is it pretty obvious if it is cracked?
Looking at youtube for vids I see cracked screens but if thr lcd is cracked even just a little bit will it show?
I put thr tablet back in thr box an d pushed down on it with my fingers to try to see how mufh pressure it takes to collapse in the box again..and I heard a crack sound im so stupid..I don't see any damage still and I think the crack sound was from the see through plastic sheet inside rhe box and the cardboard pressing dosn against it.
If I dont see any cracks or damage to thr lcd is it most likely ok? Im so paranoid now. Maybe I should return it just ij case and get a replacement seeing as I am in my 28 day returns period
Is it safe to assume if I can't see any cracks its unlikely to br damaged?
i may say had a bad luck when buying online via lazada.my , CANT claim warranty . still under warranty, not caused by dropping, its factory defect.. sent to singapore but not fixed, send to local seller and returned back. this is my timeline https://www.youtube.com/watch?v=9DD4dz3VTUs
no choice i gotta put aside till have enough money by myself. looking at aliexpress and dhgate, price still beyond my budget
fyi, aliexpress and dhgate i had good purchase track record
please watch and spread this https://www.youtube.com/watch?v=9DD4dz3VTUs
price complete set http://www.aliexpress.com/item/For-...2272498413.html?spm=2114.32010308.5.11.WBmYM2
might be mean but if your friend dropped it, he should be paying
this happened to me to, but about a month, and a half latter.
THE ONLY ADVICE I would give you is to go take it somewhere and get it fixed by a professional. If you follow that one YouTube Video, all your going to manage is cracking the Actual Display underneath the Glass. As it is these pieces are fused and, are essentially one unit. While it might be possible to just replace the Glass. It's doubtfull that finding the right fixer (i.e. Glue) would-be that simple. It also (to me) seems like the Tab Pro also has a thin polarising film between the Glass and the LCD display. Which was too easily damaged with the String technique. Not so much a problem if you have an extra 50.00€ for a pack of 25 Strips @ 8.4"
About your best option is to locate the next Samsung Depot (for myself that would be in the Netherlands), and they want ca. ~120.00€ (Before Tax!), for a replacement unit. (i.e. the Touchscreen + LCD + Frame. e.g. more like 169~€ by the time you work out shipping & tax.
Having a thought about it... It was just cheaper in the end to by a totally new neused Device. Which then set me back a 175.00€.
but those Displays from Fleebay, are as I gather chepo counterfeit Chinese Displays which are not as good as the original ones. Be that as it may... I'd have yet to find one that came with the Frame (i.e. with the Home Button.), cause for ~115€ they sure don't, and again you'd have to figure out how to reglue that bit without destroying the new Display.
1miracle2 said:
Does anyone know where I can buy the OEM backplate and possibly the cheap silver trim between the backplate and the screen?
I wrote a review on Amazon about what happened under the same name. Got nowhere with Samsung support, while looking for parts I found this post. Figured someone here may know.
Click to expand...
Click to collapse
My guess is your supposed to recycle the Backplate from the Original Screen. I guess getting it off the old one may be one thing. But how you'd go about regluing it back to the new Screen is to me questionable.
The 'Silver' bit is the rear cover. So One would think you already had that bit. in fact it's between this and the Glass Panel where you need to take a thin but very stiff like a Driver's License. To pry open the Device.
Again the best way to go is either though Samsung Direct, or one of its other partners.
It would also be helpful to know the Part Nr. Which are:
GH97-15740A (White)
GH97-1574B (Black)
Needless to say at those prices... You may well be better off buying a whole new Device.
I have an excellent condition digitizer but the glass is cracked. If wants to buy it they will have to remove the glass. Its from a T705
I too have a replacementWhite Digitizer Screen (White), still in the Envelope it came in with. Which I bought in a panic, after having also dropped my first T325. T_T.
Unless your very skilled, or know someone who is, at removing said Damaged Digitizer. I would forget this exercise. As you will at the least of it damage the Polarising Filter (Between the Digitizer, and the LCD Display), and at worst actually damage the LCD Display.
Having replaced a few Chinese Devices with their cheap plastic Digitizers is nothing like the way Samsung have done it. Unfortunately both the Digitizer, and the LCD have been fused together, as One unit. Again with a sandwiched Polarising Filter in the Middle.
There have been some Videos of People fixing the T320 that way, but the T320 doesn't have a Speaker Grill on it either. When I tried it on m, first One, the Dental Floss kept getting caught on it, an eventually damaged the underlying Filter (Which if you had done this would appear as just White Light.) Eventually in that game of tug, and war the LCD completely disintegrated.
I eventually found the Part Number (from a Samsung Tech Manual) p, and was able to locate two possible locations from which to order a replacement Screen from. Samsung in the Netherlands, and some other 3'erd Party from Poland. But either way you were looking at about 160€'s before Postage, and VAT (e.g. Sales Tax, which was higher in the NL). Making a total replacement, both simplier, and more cost effective.
Did you try heating it up like in the videos? I think the key is getting the glue loosened up

Categories

Resources