Hello,
Recently I've flashed Arco's CM9 version. It all went well for a couple of weeks until today. When I booted my phone, suddenly all apps started crashing and then it rebooted. But, the problem is, it is now stuck on a flashing Samsung logo.
Before I've started this thread, I've read many many similar threads about this, and started a 'rescue operation' by my own by using the tutorials for flashing back a stock rom with ODIN and other possibilities.
Unfortunately, after I've tried twice using ODIN, my phone is still stuck in the Samsung logo loop. I also can't enter Recovery mode, but am able to enter Download mode, as you've probably noticed.
As this is my first Android phone, I've always carefully read the tutorials and disclaimers about possible failures. I'm aware that the maker of the rom is not responsible for this.
Since I tried to flash back to stock android 2.3.6 from CM9 kernel, I've read that this could give some problems. My question is:
- Would flashing CM9 back worth a shot, or totally useless?
I hope you can help me, and if there isn't a solution, I hope the shop can cover this as I've got warranty for one year and 9 months.
Care to share how you had flashed it at first...
And you can still boot to recovery rite ?
Sent from my GT-I8150 using xda premium
countdown93 said:
Hello,
Recently I've flashed Arco's CM9 version. It all went well for a couple of weeks until today. When I booted my phone, suddenly all apps started crashing and then it rebooted. But, the problem is, it is now stuck on a flashing Samsung logo.
Before I've started this thread, I've read many many similar threads about this, and started a 'rescue operation' by my own by using the tutorials for flashing back a stock rom with ODIN and other possibilities.
Unfortunately, after I've tried twice using ODIN, my phone is still stuck in the Samsung logo loop. I also can't enter Recovery mode, but am able to enter Download mode, as you've probably noticed.
As this is my first Android phone, I've always carefully read the tutorials and disclaimers about possible failures. I'm aware that the maker of the rom is not responsible for this.
Since I tried to flash back to stock android 2.3.6 from CM9 kernel, I've read that this could give some problems. My question is:
- Would flashing CM9 back worth a shot, or totally useless?
I hope you can help me, and if there isn't a solution, I hope the shop can cover this as I've got warranty for one year and 9 months.
Click to expand...
Click to collapse
it happened to my friends phone also, he can go to DL mode but not recovery mode, he flashed a stock rom via odin, but that didnt help, he was still stuck at samsung logo, and about flashing CM9 again, i guess u cant bcoz u cant go to recovery mode, if youve flashed a stock rom again and that didnt work for you too, i guess u need to send to samsung for repair, i remember my friend said it was a hardware problem, good luck
vanir29 said:
it happened to my friends phone also, he can go to DL mode but not recovery mode, he flashed a stock rom via odin, but that didnt help, he was still stuck at samsung logo, and about flashing CM9 again, i guess u cant bcoz u cant go to recovery mode, if youve flashed a stock rom again and that didnt work for you too, i guess u need to send to samsung for repair, i remember my friend said it was a hardware problem, good luck
Click to expand...
Click to collapse
I've read elsewhere that it was a hardware problem that appeared on 1:10 Wonders... I'm really disappointed since this was my first smartphone...
A small question though: Since I've (tried to) flash it back to stock rom, if I bring it back to the shop where I bought it, would they notice that there was another rom, which could give them a reason that I've void the warranty? I really don't want to pay another amount of cash for this (faulty) phone.
Also in reply to andynroid: I've flashed CM9 the first time with CWM, as adviced by Arco68.
Can you still go to recovery ?
Sent from my GT-I8150 using xda premium
countdown93 said:
I've read elsewhere that it was a hardware problem that appeared on 1:10 Wonders... I'm really disappointed since this was my first smartphone...
A small question though: Since I've (tried to) flash it back to stock rom, if I bring it back to the shop where I bought it, would they notice that there was another rom, which could give them a reason that I've void the warranty? I really don't want to pay another amount of cash for this (faulty) phone.
Also in reply to andynroid: I've flashed CM9 the first time with CWM, as adviced by Arco68.
Click to expand...
Click to collapse
well in my friend's case, samsung accept it and repair it, if the stock rom is flash successfully, i think they wont notice that you've flash i custom rom, good luck though
Am I being dense.... but what is 1:10 Wonder???
I saw this also mentioned by Rio S. (I think)....but did not think anything about it.... but, is it HW version??
Where can I see it on device.
Andy....
Guy says in OP...
can't get Recovery!!!
:banghead:
Sent from my GT-I8150 using Tapatalk
irishpancake said:
Am I being dense.... but what us 1:10 Wonder???
I saw this also mentioned by Rio S. (I think)....but did not think anything about it.... but, is it HW version??
Where can I see it on device.
Andy....
Guy says in OP...
can't get Recovery!!!
:banghead:
Sent from my GT-I8150 using Tapatalk
Click to expand...
Click to collapse
Hi...
I wrote in this thread
http://forum.xda-developers.com/showpost.php?p=25616419&postcount=17
The only solution seems to be to flash an Asian rom with multi package.
Sent from my GT-I8150 using Tapatalk
when you try to enter recovery mode, what is the image you first see? is there an image that look like an android? i cant remember the exactly image but if you see that image, i think you must reflash the CWM via odin. Because every time i reflash the stock rom, my recovery mode will gone. So try to reflash CWM via odin. Nothing wrong if you give it a try
irishpancake said:
Am I being dense.... but what is 1:10 Wonder???
Click to expand...
Click to collapse
i think it is one(1) out of ten(10) or 1 is to 10 sgw has a hardware problem, i guess thats what he meant, but isnt it kinda high
Experienced this as well. Just sent it for warranty and they swapped out the motherboard.
alidsd said:
The only solution seems to be to flash an Asian rom with multi package.
Sent from my GT-I8150 using Tapatalk
Click to expand...
Click to collapse
I've heard and read about that, I thought that Rio did that, but it wasn't succesful.
tomatoman23 said:
when you try to enter recovery mode, what is the image you first see? is there an image that look like an android? i cant remember the exactly image but if you see that image, i think you must reflash the CWM via odin. Because every time i reflash the stock rom, my recovery mode will gone. So try to reflash CWM via odin. Nothing wrong if you give it a try
Click to expand...
Click to collapse
I wished I could enter Recovery mode, but the problem is: I can't
. But I also didn't know that if I flash back to stock rom, the recovery would be gone too. Maybe I should reflash CWM via odin. Nice advice.
vanir29 said:
i think it is one(1) out of ten(10) or 1 is to 10 sgw has a hardware problem, i guess thats what he meant, but isnt it kinda high
Click to expand...
Click to collapse
Jup. One out of ten => 10%. Such an error rate may not appear for such a great brand. That is ridiculously high. Even 1% is too high in my opinion.
Deathmax said:
Experienced this as well. Just sent it for warranty and they swapped out the motherboard.
Click to expand...
Click to collapse
Yeah, but what I've heard from others in the Netherlands: they will say that your device has been damaged by water, which isn't protected by warranty. And the bill is equal to a new device, or even more expensive. I hope they're in 'good mood', otherwise I maybe have to search for another device.
Hey Bro... this happen to me a while ago.... but covered by warranty , just simply told them at the SSC that you do an update via Kies and sxxt happen , coz in my place there are cases that the phone hang after update via Kies not only this model , it happen to others model too.
I suggest that you flash it back to stock before you send it back to SSC , without CWM .
cheers
vanir29 said:
i think it is one(1) out of ten(10) or 1 is to 10 sgw has a hardware problem, i guess thats what he meant, but isnt it kinda high
Click to expand...
Click to collapse
My friend!!!
I think you have solved the mystery of 1:10......
but can Rio S. confirm??
I don't have bricked phone....
but I try to understand what is causing these, so to be of some help....
and 1:10 was a puzzle to me, so thank you...
Sent from my GT-I8150 using Tapatalk
Related
Hello everyone,
My phone was working fine until it starts an infinit loop when I tried to fix it, I downloaded and flashed a CDMA rom (mysid) on my GSM Galaxy nexus GT-I9250 (yakju) by mistake.
I tried ODIN to flash it back but it always stuck when it starts to write the bootloader
ODIN post that I used:
http://forum.xda-developers.com/showthread.php?t=1586807
I attached a screenshot of my current phone state
Is there a way to fix this mistake?
Please note that I don't have warrantee on my phone :'(
if you have a CWM recovery try that first. andifthat doesnt work then try flashing with fastboot. thats what i would do
mohio said:
Hello everyone,
My phone was working fine until it starts an infinit loop when I tried to fix it, I downloaded and flashed a CDMA rom (mysid) on my GSM Galaxy nexus GT-I9250 (yakju) by mistake.
I tried ODIN to flash it back but it always stuck when it starts to write the bootloader
ODIN post that I used:
http://forum.xda-developers.com/showthread.php?t=1586807
I attached a screenshot of my current phone state
Is there a way to fix this mistake?
Please note that I don't have warrantee on my phone :'(
Click to expand...
Click to collapse
I'm not totally involved in all the modding, but I do know that if you can get something to pop up(like that screen), you didn't destroy your device. Just keep playing around with tools and what not until it starts working.
freebordjunky said:
if you have a CWM recovery try that first. andifthat doesnt work then try flashing with fastboot. thats what i would do
Click to expand...
Click to collapse
Unfortunately CMW can't start and I think it been wiped out after I CDMA rom..
fastboot is not detecting nor recognizing the device.. I need to get to recovery mode to use fastboot which I can't go further than the attached screen..
Thanks though for your suggestion
Jmurph3 said:
I'm not totally involved in all the modding, but I do know that if you can get something to pop up(like that screen), you didn't destroy your device. Just keep playing around with tools and what not until it starts working.
Click to expand...
Click to collapse
I believe so too.. Thanks for your support..
If you wont have any luck fixing it and If you are in the US, try going to mobiletechvideos.com. They will fix it for about 30$
Sent from my SAMSUNG-SGH-I957 using xda premium
mohio said:
Hello everyone,
My phone was working fine until it starts an infinit loop when I tried to fix it, I downloaded and flashed a CDMA rom (mysid) on my GSM Galaxy nexus GT-I9250 (yakju) by mistake.
I tried ODIN to flash it back but it always stuck when it starts to write the bootloader
ODIN post that I used:
http://forum.xda-developers.com/showthread.php?t=1586807
I attached a screenshot of my current phone state
Is there a way to fix this mistake?
Please note that I don't have warrantee on my phone :'(
Click to expand...
Click to collapse
Happened to me with my Epic 4G Touch... flashed the wrong image and ruined my mood. Tried everything but unfortunately, I had to get it jtagged by some guy online.
Have you tried running Odin as administrator? Usually works for me.
Sent from the future.
Ghostello88 said:
If you wont have any luck fixing it and If you are in the US, try going to mobiletechvideos.com. They will fix it for about 30$
Sent from my SAMSUNG-SGH-I957 using xda premium
Click to expand...
Click to collapse
Thanks! I'll keep them in mind.. Though they have another service for bricked phone cost 50$.. I might need to contact and ask them.
SocialReject said:
Happened to me with my Epic 4G Touch... flashed the wrong image and ruined my mood. Tried everything but unfortunately, I had to get it jtagged by some guy online.
Have you tried running Odin as administrator? Usually works for me.
Sent from the future.
Click to expand...
Click to collapse
I tried the administrator privilege.. Same result.
Thanks for sharing.. do you mind if you send me the online guy contact in case I can't fix it.
First, try flashing whatever ODIN file you HAVEN'T tried flashing. It may successfully flash...
Your phone still probably won't boot...but you might have access to the bootloader at that point.
If not:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Make a jig.
Or find one on amazon.com.
This will get you into download mode and make ODIN usable.
Don't worry if our device doesn't list as a "working device" if you decide to purchase one...it'll work.
Edit:
Oh, and the "counter reset" that people talk about online with these jigs...
Ya, our phones don't have a flash counter. So that is irrelevant. FYI.
Jubakuba said:
First, try flashing whatever ODIN file you HAVEN'T tried flashing. It may successfully flash...
Your phone still probably won't boot...but you might have access to the bootloader at that point.
If not:
Make a jig.
Or find one on amazon.com.
This will get you into download mode and make ODIN usable.
Don't worry if our device doesn't list as a "working device" if you decide to purchase one...it'll work.
Edit:
Oh, and the "counter reset" that people talk about online with these jigs...
Ya, our phones don't have a flash counter. So that is irrelevant. FYI.
Click to expand...
Click to collapse
I downloaded everything and even created my own combination but always get stuck at the point when it needs to write.
I have ordered:
amazon. com/gp/product/B005UUCT0Y/
it should be delivered by tuesday..
Thank you Jubakuba! for your suggestions and support.. The Youtube video seems to be very identical to my situation but with the galaxy S. I hope the jig helps me to get to download mode.
It's really amazing to see this kind of support and assuring around here.. I truly love you guys! :')
help.i flashed a galaxy s 2 skyrocket rom by mistake.after the flash i reboot system now from recovery and my phone just died.will not boot not even a battery symbol while charging.also laptop will not recognise and no download mode. is this a hard brick?only 3 weeks old can someone help me please.sorry my phone is the canadian koodo version believe its i989d
I had almost the same exact problem, except mine was from trying to flash a zImage that I built. My symptoms were exactly like yours. The phone is hard bricked and can only be revived through jtag. Also a usb jig had no effect on my bricked phone.
what is jtag
jamesrfraser said:
what is jtag
Click to expand...
Click to collapse
Didn't mean to thank you wanted to quote. Can you get into recovery at all. The sr forum roms can be without an issue be installed into our devices even koodoo. Might need a rotation fix but they are all compatible. Pls post what recovery, what rom and the steps taken to flash the aforementioned rom. I will try my best to help you out and get you back to flashing again...
Sent from my SGH-T989 using xda app-developers app
datrapstar said:
Didn't mean to thank you wanted to quote. Can you get into recovery at all. The sr forum roms can be without an issue be installed into our devices even koodoo. Might need a rotation fix but they are all compatible. Pls post what recovery, what rom and the steps taken to flash the aforementioned rom. I will try my best to help you out and get you back to flashing again...
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
no recovery at all.phone is completely dead.i cant remember what rom it was sorry brain fart.i flash new roms all the time and followed to a tee.after i flashed i i hit reboot system frolm recovery mode and my phone and screen went blank and thats when it died.like i mean absolutely nothing.600 dollar paper weight
2 options.. mobiletechvideos.com or warranty exchange... or last resort you can try and jig it yourself...
On the other hand is there anyway to test the battery? Could be a dead cell and that could cause you not to be able to turn on. ... try this, go into your nearest tmo store and see if you can test with one of their batteries. They should do that without any charge.
Sent from my SGH-T989 using xda app-developers app
I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!
still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?
phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:
Issue
1. Phone won’t boot beyond the Samsung Logo.
2. It won’t boot into recovery (download mode works).
3. Can flash rom using Odin but phone still won't boot.
Type of Phone
Type: AT&T Samsung Galaxy Note 2
Model: i317
Ownership: Bought in Nov 2012 brand new. Warranty is up but it is insured through AT&T.
History: Rooted and then un-rooted and returned to stock in January 2014.
Actions leading up to Issue
Updated to Samsung’s newest firmware Android 4.3 but didn’t like it. I rooted my phone and tried a custom rom but wasn’t happy. Un-rooted by flashing original stock rom via Odin 3.07. Worked great and I was back in business. But then the phone went through an update and never booted back up.
Detail
I’ve rooted all my other phones but never felt the need to root this one until I updated to Samsung’s new Android 4.3. I wasn’t happy with the decreased battery life and poor performance. So I used the method at http://forum.xda-developers.com/showthread.php?t=2004650 to root my phone using “root66_ATT_I317UCALJ2.tar.md5” with Odin 3.07 and it worked. I then tried a custom Cyanogen Mod rom but it still left something to be desired.
After more research I flashed the original stock rom “KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5” via Odin 3.07 and my phone worked beautifully, at least for a day. Then I started getting the AT&T update window for Android 4.3 and the only way to get rid of it was to pull my battery. It was happening so much that I couldn’t even make a phone call. Out of pure frustration I decided to accept the update.
After the update installed it rebooted and never made it past the Samsung logo. So I figured I would just go into recovery and perform a factory reset as well as wipe the cache. The problem here is that it won’t boot into recovery. Only download mode works. I’m also seeing a red LED which I’ve read is a sign of SDS.
I’ve tried re-flashing the original stock rom again. Every time I do I get the green “Pass” display but my phone still won’t boot. The binary count is now at 21 since I’ve tried flashing so many times. I’ve been working on this and researching for 3 weeks. I’ve never had an issue that I couldn’t resolve when it comes to any of my past phones but this is beyond my skill or understanding. I also tried Samsung keys but it says my device is not supported.
Short of digging a hole in my back yard and burying it, is there anything I can do to fix this?
(Note) My wife has the same phone and also didn’t like the update so I flashed the same original stock rom to her phone via Odin and it has been working just fine. Only difference is I never rooted hers. I should have gone that route with mine.
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
josh3josh3 said:
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
Click to expand...
Click to collapse
Here's the link to TWRP (you want the Odin link toward the bottom):
http://teamw.in/project/twrp2/124
Here's the direct link to the latest philz cwm (you want the md5 file):
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt
I prefer philz, but you will likely need TWRP to follow the dicksteele guide. You should also track down a CWM flashable recovery package for MH3 recovery to flash back should you need to return the phone for repairs. You can get this by following the i317 link in my sig.
If flashing this in Odin doesn't work that would tend to support the emmc fail scenario. (i.e. you flash it, Odin behaves as if it flashed ok, you power off, attempt to boot recovery with home-VolUp-power and it still doesn't boot). If it does boot recovery, you can try the guide as I mentioned before. Good luck!
Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
josh3josh3 said:
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
Click to expand...
Click to collapse
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
So, there appear to be many people who see this update as a bad joke. Like me.
I had a thread a couple days ago about how to kill the notification from att
Without root. Nothing can be done as far as ive heard/seen. Im a bit confused
About needing a battery pull to remove pp note, I have been just reboot and it
Goes away until next data use/net access. When my 8 hrs is up I turn data on
(Data off as 8hrs expires) and immediately get note and then I hit home- get
another 8 hrs. Im sorry to hear they wore you down with the note- im going to
fight and resist for the duration. And keep stock. Its a game now!
R, john
qkster said:
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
Click to expand...
Click to collapse
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
josh3josh3 said:
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Click to expand...
Click to collapse
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
dicksteele said:
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
Click to expand...
Click to collapse
Have tried that many times with no luck. Wish it were that simple.
josh3josh3 said:
Have tried that many times with no luck. Wish it were that simple.
Click to expand...
Click to collapse
Have you tried this yet ?
http://forum.xda-developers.com/showpost.php?p=49826416&postcount=9
Zen Arcade said:
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
josh3josh3 said:
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
Click to expand...
Click to collapse
That would be the Thanks button by the Quote...
OUTSTANDING !!!
Glad you're back among the living.
This will get you back to 4.1.2
http://forum.xda-developers.com/showpost.php?p=49616718&postcount=2
EDIT:
I just did this and it worked perfectly .....
I'm actually doing that step right now also. I flashed back to stock testing the ATT update server.
EDIT #2:
At this step when the phone reboots the script will run. When it completes you want to boot to system. The next prompt will be do you want to install ROOT. If you do the swipe it will install ROOT, there is a DO NOT INSTALL button on the middle of the screen. Just a heads up, don't know if you are turning your phone back in or not now.
- Second step is:
You will need to download TWRP 2.6.3.1 and flash it in ODIN.
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
This is necessary for an openrecovery script to run that is stored in the /cache directory from the update.
- Put your Note 2 in Download Mode.
- Open ODIN, put openrecovery-twrp-2.6.3.1-t0lteatt.img.tar in PDA slot. Click Start and let the phone reset.
- Your phone will reboot in TWRP. If not, pull battery and enter recovery mode boot into TWRP recovery (HOLD VOL UP+HOME+POWER). The script will run by itself.
sgh-i317 EFS seems like its gone
could anybody help me out with my note 2. ive tried just about everything i can think of. im getting pretty desperate. i can get everything to work fine (recovery,download mode,) but something is keeping it from booting up to the main screen, it will just hand at the boot animation, or the att logo. in twrp it tells me failed to mount efs. ive looked around in the file folders and its like it got wiped out? im not sure how though. could that be why its not booting up?
any ideas??
Im Sorry guys to bother you but i need to root/flash custom roms and modify some stuff in my sister's galaxy w and i dont know anything about samsung system because im using sony since i was born and the system in sony was that i have to unlock bootloader then root then flash kernel then flash custom rom and if something goes wrong i hold the volume up and go into fastboot mode and get everything back to normal
So please if anyone can help me on how to root and flash and what are the right steps and if i got into a bootloop or something how can i get the phone back to stock
thanks in advance
aliiahmed.20 said:
Im Sorry guys to bother you but i need to root/flash custom roms and modify some stuff in my sister's galaxy w and i dont know anything about samsung system because im using sony since i was born and the system in sony was that i have to unlock bootloader then root then flash kernel then flash custom rom and if something goes wrong i hold the volume up and go into fastboot mode and get everything back to normal
So please if anyone can help me on how to root and flash and what are the right steps and if i got into a bootloop or something how can i get the phone back to stock
thanks in advance
Click to expand...
Click to collapse
Search before you ask any questions, by the way here is a link for the tread on how to root the phone : HERE
You dont have to unlock bootloader for the samsung phones, you just press the button and pray for the phone to work after that
Hope you got your answer here, Enjoy
Click the link below to go to my A to Z beginners guide.....
http://forum.xda-developers.com/showthread.php?t=1941028
it tells you EVERYTHING you need to know about rooting, recovery and custom ROMs..... all in one place.....
Sent from my Infected KitKat bar.....
MayB4ck said:
Search before you ask any questions, by the way here is a link for the tread on how to root the phone : HERE
You dont have to unlock bootloader for the samsung phones, you just press the button and pray for the phone to work after that
Hope you got your answer here, Enjoy
Click to expand...
Click to collapse
Yea thanks for the info but if anything go wrong or i get into a bootloop or a software brick how to fix the phone ?
(in sony i use flashtool to reflash the stock software even if the phone doesnt have a rom/kernel/recovery the flash mode will work)
aliiahmed.20 said:
Yea thanks for the info but if anything go wrong or i get into a bootloop or a software brick how to fix the phone ?
(in sony i use flashtool to reflash the stock software even if the phone doesnt have a rom/kernel/recovery the flash mode will work)
Click to expand...
Click to collapse
Odin is the Samsung equivalent of Sony's Flashtool. CWM is another lifesaver as it has wipe options built in that can help to get a phone to boot. CWM remains installed even if the main OS is removed........
Sent from my Infected KitKat bar.....
keithross39 said:
Odin is the Samsung equivalent of Sony's Flashtool. CWM is another lifesaver as it has wipe options built in that can help to get a phone to boot. CWM remains installed even if the main OS is removed........
Sent from my Infected KitKat bar.....
Click to expand...
Click to collapse
Yeah I have used sony phone for a while and i have broken it (Hard bricked) when unlocking the bootloader, then I picked up a galaxy w and I am still in love with it, Its a single core but it can do miracles. I have soft bricked my phone many times, I sometimes delete the ROM i put on the sd card to have room for the kernel and other tweaks so i use Odin to just return the stock OS and then get a new ROM and flash it inside. There is not much risk and you cant go wrong with the phone. I fixed mine many times and i know how many frustration you get when doing such thing. I remember the first time when i bricked my phone by installing kernel for another android version, and then i booted up to CWM and wiped data/cache and flashed a new rom. Because of the long booting time i thought that its over, i broke my phone, but after sitting there for 10 mins. it finally booted up. Damn i was so happy then, i rooted my phone and installed a new rom for first time :victory:
MayB4ck said:
Yeah I have used sony phone for a while and i have broken it (Hard bricked) when unlocking the bootloader, then I picked up a galaxy w and I am still in love with it, Its a single core but it can do miracles. I have soft bricked my phone many times, I sometimes delete the ROM i put on the sd card to have room for the kernel and other tweaks so i use Odin to just return the stock OS and then get a new ROM and flash it inside. There is not much risk and you cant go wrong with the phone. I fixed mine many times and i know how many frustration you get when doing such thing. I remember the first time when i bricked my phone by installing kernel for another android version, and then i booted up to CWM and wiped data/cache and flashed a new rom. Because of the long booting time i thought that its over, i broke my phone, but after sitting there for 10 mins. it finally booted up. Damn i was so happy then, i rooted my phone and installed a new rom for first time :victory:
Click to expand...
Click to collapse
So can you give me a small guide on how to use Odin ?
You don't NEED to use Odin. The link I provided gives you easy to understand information about how to root, CWM and flash cusROMs 'in phone'......
It's how I did it, and it really is very easy to do/follow.......
Sent from my Infected KitKat bar.....