Develop Bugs

Worst Case and no more ideas (no rom, no recovery)

Hi!
I just tried to change from RCMixHD (D2EXT) to CM7.
As first, I flashed the AlphaRev CM7 image via Android Flasher and right after that the newest radio version via recovery (32.54.00.32U_5.14.05.17). Since the radio is flashed, i was unable to flash anything in recovery mode, so i decided to format everything, wipe all data so that I just lost my current ROM. It still didn't work, so i decided to reflash the Recovery via Android Flasher and now I can't even boot into the recovery menu. For now I can only boot into the HBOOT and use the fastboot. I got Micro-SD adapter to put anything to my SD-Card, but currently i got no idea what to do. Are there any ROMs i can flash with fastboot?
Got any hints to unbrick the recovery?
Current overview of information:
Desire is S-OFF
No current ROM (full data wipe)
Recovery unbootable (stucks at AlphaRev splashscreen)
HBOOT bootable
SD Card formatted with 5,5gb FAT32 and 2gb EXT4
Got Android SDK installed on my computer

Flash CWM 2.5.0.7 or amon ra via fastboot, make sure it's the desire version and md5 matches. Then install a rom.
Sent from my HTC Desire using XDA Premium App

Or go back to stock with RUU for your phone and start again

Thanks for now!
Just flashed the CWM manually with fastboot and i can boot into the recovery again.
However, the recovery is still hanging up when I do any actions related to the sdcard. No update.zip, no manual chooses possible, no wipe.
But for me, it looks like it's not the sdcard which currently ****s up everything, it seems to be the phone itself. I can still mount my sd in recovery, i can also format everything manually, but as soon as i try to install or choose a factory reset, the recovery ends up in a black screen.
--------
edit:
Okay. Looks like i fixed it now by wiping dalvik, battery stats, cache and then wiping data.
Still confused why it works now, but thank you for pushing me into the right direction. Now i can get everything back to work. Thanks!

why hello there!
Has been a while since i had to recover a phone from a worst case scenario, so i thought i could just revive this thread, as there is no desire 310 subforum yet
Rooted it successfully, read a lot of threads regarding MTK-based phones and thought i might be able to get more out of it, as i wasn't completely fine with 4.2.2 installed on a brand new phone.
However, i ended up with trying to install a custom recovery as described [here(would be a link if i were allowed to post them)]. The whole process gave no error, everything looked fine, ending with a "success!"-message, followed by a reboot, showing just the HTC splash... and a reboot... and a reboot... and.. well i guess you know what happened next.
Based on a whole lot of different threads, this might not be the end of my phone, as i can still see the [preloader(would be a picture if i were allowed to link it)] in my device manager, which basically means "hi, i'm not completely dead and you might find a way to recover me".
The question is: how?
I tried out SP Flash tool and MTK Flash tool so far. both programs find the phone when i get it ready to download my previously made backup (hey. i might not exactly know what i'm doing there, but at least i saved everything before i wrecked it! ).
The problem is: I just get an[error message(look above)] about some failed download to SRAM sorcery, which sounds cool and important but doesn't give me a clue about what i'm doing wrong or how to fix it. (cable ok tested 3 different cables, including the one the device was shipped with, also tested it on my PC running win 8.1 x64 and another one running win 7 x86)
Does anyone have an idea how i could get at least a working bootloader/recovery back to my device?
Tell me if you need any extra information
I also link an attachment including the log file created by SP Flash Tool.
View attachment SP_FT_Dump_05-31-2014-12-45-24.zip
Well. That's it. Thanks in advance for anything that may be posted in here
edit:
pictures mentioned above
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

HELP Please!

Hello,
I upgraded to 2.3.3 and now i cant get back to 2.2
I have tried http://revolutionary.io but i keep getting Invalid Beta key
So all i ask is 1: is there any other way to return to 2.2?..... or 2: anyone know how to sort http://revolutionary.io out?
Cheers Guys/Girls
Flunk

Check Rom Manager in Market
You can download ROMs and save em to SD Card
Install ClockWorkMod Recovery
And Flash ROMs from SD Card

NeroBoron said:
Check Rom Manager in Market
You can download ROMs and save em to SD Card
Install ClockWorkMod Recovery
And Flash ROMs from SD Card
Click to expand...
Click to collapse
no... just.. no.. please don't give false advice and false hope.
Are you sure you're entering your serial number correctly on the revo site? Just to make sure, take out your battery and type in the number labelled S/N:
when you've done that, copy the number given to you on the site, and when you're in cmd paste it (on the top left corner press the cmd icon, edit, paste) when you're running the revo program

yeah it was me putting the wrong code in (Face Palm)
Ok iv done that how do i revert back to 2.2 from here ? (still stuck on 2.3.3)
Bortak you got Thanks

1. Download the downgrader
(CHECK MD5!! 6c482ccfa6b7093de4ee1a5804ccbdfc) and put it in your c:\
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Download attachment names "fastboot.zip", and unzip it into your c:\
3. Reboot into fastboot mode (power off, hold back & power), open cmd (start menu, accessories) and type
Code:
cd\
fastboot flash hboot bravo_downgrade.img
fastboot erase cache
fastboot reboot-bootloader
4. Once you have flashed that. Run the latest WWE RUU
You will now have the stock android 2.2, however, I personally would recommend using custom ROMs with a rooted phone.

ok im lost im really sorry....
Is there another simpler tutorial?
Sorry im a big noob lol

thats pretty much as simple as it gets... let me edit it a little for you to make it easier I'll put some images in too

i get this error..... fastboot failed to start because AdbWinApi.dll was not found?

flunkyou2 said:
i get this error..... fastboot failed to start because AdbWinApi.dll was not found?
Click to expand...
Click to collapse
oooohhhhh...
okay well lets try to use this application then.
Download it from that site ^
boot into fastboot mode and plug in via usb
tick "hboot" and browse for the "downgrader" you put in your c:\ and then press begin.
Once you've done that, use the volume keys on your phone to navigate to REBOOT BOOTLOADER and press power
then, run the latest WWE RUU (link in previous post)

i didnt have to reboot it... it did itself is that ok ?

flunkyou2 said:
i didnt have to reboot it... it did itself is that ok ?
Click to expand...
Click to collapse
yes that's fine, I don't know android flasher that well cos I personally don't use it.
So now, when you go into bootlaoder, it should say REVOLUTIONARY UNLOCK.
you should now be able to flash the 2.2 RUU

it says AlphaRev Unlock

flunkyou2 said:
it says AlphaRev Unlock
Click to expand...
Click to collapse
yeah, my mistake
so yeah, now all you have to do is flash the 2.2 RUU from fastboot.

how is that done as i keep getting a error saying Bootloader version error [140]
:S

i swear im going to be crying in a min lol I have lost S-OFF and now its S-ON and also the HBOOt is 0.93.0001

so wait.. what exactly is the situation?

i tried to 2.2 in fastboot it never worked it rebooted.... so i tryed flashing through windows (never worked) and now i lost the AlphaRev Unlock writing in Fast boot and S-ON is back.

but does it boot into android?????

yeah 2.3.3

oh ok thank god you scared the sh*t out of me... ummm... okay well if that didn't work then I dunno what to do... I'd just recommend a custom ROM.. you'd have to S-OFF, and then flash it through recovery.. that's my best advice.

WTF!!!!!!!

I recently sold my Wildfire S, and because of that I wanted to wipe the phone out. So, I went to install a ROM, the same m1 mix I have been using for months, and I tried to install it again.
> Stays at HTC white screen and will forever if I let it.
> Tried installing another ROM to see if it was just corrupt. No go.
> I can get to the HBoot screen and move around but I can't get past HTC screen after installation is complete!!!
> Tried installing CWM again to see if it was an issue there, but now I get a "Install Fail" message because the ID is incorrect (I assume it has to do with the golf card)
I just want the damn thing to boot and work, I don't even care if it goes back to stock, I just need it to work. What are my options here? Any help would be great. An important factor I should mention is that I am on a Mac, and only have access to a Mac.
Thanks!

I have an evo so I'm not sure how things work on your phone but have you tried an ruu? It should help
Sent from my PC36100 using xda premium

Are you wiping data/factory reset, cache and dalvik? You need to do this in cwm

Yes, I always wipe both system and cache, as well as dalvik.
I will try a RUU, see where that gets me. Thanks. And if anyone else has suggestions please let me know!

I think you can only run an ruu under windows.
I could be wrong though.

I can't just have the ZIP on my SD Card and install it from there?

You can but I think it will give you the same issue.
Try it though, its worth a shot

I just want the easiest way to get this back to functioning. I don't need any of the data on the phone or the SD card. I just wanted it to work. Period.

Easiest and safest is ruu
Do you not know anyone that will let you run it on their windows machine?
It would take 10 mins topps and is almost guaranteed to get you back up and running.
By the way are you a GSM or cdma user?
Edit: is that rom overclocked by default? The reason I ask is a lot of people have been having issues like you when installing Rom's that are pre overclocked.
Check if there's a default clock speed kernel on his op

GSM Virgin Mobile Canada.

nootered said:
GSM Virgin Mobile Canada.
Click to expand...
Click to collapse
Also your bootloader must be locked in order for the ruu to work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I am unlocked currently. I have been running it just fine with the m1xd ROM, all the stats are in my sig.
I just want this facking thing to function!!!!!!!!!!!! :O

nootered said:
I recently sold my Wildfire S, and because of that I wanted to wipe the phone out. So, I went to install a ROM, the same m1 mix I have been using for months, and I tried to install it again.
> Stays at HTC white screen and will forever if I let it.
> Tried installing another ROM to see if it was just corrupt. No go.
> I can get to the HBoot screen and move around but I can't get past HTC screen after installation is complete!!!
> Tried installing CWM again to see if it was an issue there, but now I get a "Install Fail" message because the ID is incorrect (I assume it has to do with the golf card)
I just want the damn thing to boot and work, I don't even care if it goes back to stock, I just need it to work. What are my options here? Any help would be great. An important factor I should mention is that I am on a Mac, and only have access to a Mac.
Thanks!
Click to expand...
Click to collapse
Hello ,
this will return your phone to stock state (means that you will no longer have CWM recovery and you will have to install it again after this. If unlocked with XTC Clip YOU WILL STAY S-OFF ,I didn`t tried it with device unlocked via HTC Dev)
STEP BY STEP instructions what you should do :
1. go to http://forum.xda-developers.com/showthread.php?t=1432474
2. download http://www.mediafire.com/?ksa9k8dmxexdkdo
3. follow the instructions from 1
4. click thanks button
credits to Gig11gs & Ping192
P.S. I`m not responsible if you do any damage to your device.

if you have a backup or something then flash it through hboot
or if you have a extracted zip file from an ruu (rom.zip file in c:/temp when you run the installer) then extract it to desktop and flash it through hboot(if the file name of system is system.yaffs2.img then change it to system.img , you require only two files boot.img and system.img so no need to extract everything just extract these two)
the codes for both are
(locate the adb files first.)
in my case i have copied fastboot file from tools folder of sdk on desktop and also adb and adbbin.dll on desktop.. if you also copy these files on desktop then run the following exact commands when you are on bootloader the fastboot option will be highligted press power buton to select it .. when you in fastboot menu connect phone to pc and then write these command in dos prompt (go to start menu , run then write cmd and press enter you will have a dos prompt open)
Code:
cd desktop
fastboot flash boot boot.img
fastboot flash system system.img
when done go to recovery and now do all format data , clear chache and dalvik chace your phone will be un rooted total stock
It worked for me.. credits to EOgan

Or you can go to this tutorial that will downgrade everything even hboot and radio at http://forum.xda-developers.com/showthread.php?t=1540952 and remember o thank me

Just a thought but have you wiped everything before flashing the ROM? I've had a weird experience once with pretty much the same issue (stuck on splash screen). Wiping everything (system, data, cache, boot AND SD Card) seemed to have resolved the issue. If you're using an already partitioned card, I'd recommend powering off after CWM flashing, unmounting the SD and then turning it on.
This should work actually (don't see a reason not to). Also, if you've modified the ROM.zip file in any way after downloading it, I'd advise flashing one which is freshly downloaded rather (would eliminate any user tweaks causing the issue).
PS. I've attached a flashable superwipe script which you can run before flashing the ROM. Let me know how it worked out for you.

[HELP] Wont go to Recovery

Hey guys
ive a problem
i have a rooted one x i already flashed android revolution 3.0 over it
but i wanted to change to android revolution lite 4.0
thats what ive done:
-download the "install-boot.bat"
-got to fastboot mode on my phone
-try to install the boot.bat ...but faild
-i think ive forgoten to superwibe... so ive done that
-again try to install boot.bat...wont work again
-try to go to recovery ...but just get a kind of a boot loop
-reinstall recovery
-still the same problem
i cant get into the recovery mode and cant boot the phone i never had this problem befor whit my android hd2
kind of "progress": now i can go to (i think it is) the start of the recovery mode: there is a lying htc phone whit a green circle with arrows but afer a while it turns into a standing htc phone whit a red exclamation mark
so what ive to do now??? i hope i havent broke the phone!!!! plz help me

Try erasing your cache in fastboot "fastboot erase cache" and see if that helps.

thanks for your reply but it says:
erasing 'cash' ...
FAILD <remote: not allowed>
finished. total time 0.067s
DAMNN no more guarantee

Okay I'm assuming that you have used fastboot before. And I assume that you have HTC drivers installed. I think your phone is going into bootloop because of the boot.img failed to flash.
I'm assuming that you are on the "fastboot USB" mode in your phone when you try to install the "install-boot.bat" right?
Because going into bootloader you start of with just HBOOT. You need to be in fastboot USB to flash boot.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yes i was on fasboot usb mode ...
so i have to try intall "install-boot.bat" again?
i get this error report
which says that AdbWinAbi.dll is missing

You can try I guess. But if it fails again I am stumped on what to do? Maybe start from scratch and return to stock and then flash ARHD 4.0.0

ok and how can i do that?...becaus factory reset wont work either(i think because of the bootloop)

please i need your help!!!

I can't read what ever the text is but it looks like its failing due to a missing DLL
Sent from my HTC One X using xda premium

Why do you want to do that .bat thing? For changing ROM you go via CWM after you put the downloaded zip on the storage card...
And flashing the appropriate boot.img the particular chef is providing via fastboot and cmd window.
Did you do a backup of your original ROM via CWM? Did you do one of the rooted ROM?
You probably have to start from scratch...read the sticky in the devs section first..excellent guides put up there...good luck
Sent from my HTC One X using xda premium

Hi guys!
I've read a lot around the forums and can't find any info on my problem.
This topic was closest to my problem, so i hope i don't annoy anyone with posting here.
I've followed every step to unlock phone (and it's unlocked) everything went successfully until i came to the recovery part.
Every time i try to start recovery from bootloader my phone hangs on the HTC screen. No matter what i try to do, (tried to erase cache and install recovery again and again) it just hang.
Tried with two different CWM recoveries.
Anyone got an idea why that is? And what i can do to get into recovery mode?
Any help would be greatly appreciated!
I'm new to Android, but man, i love this forum. So much info!
In advance, thank you!
MrD

ive done a backup for my original rom but just a titum backup for the costumrom(so just the apps)
android revolution hd 3.1 and above need to flash the boot.bat thing..i know it sucks
when i stard from scratch..will it format the sd card?

MrDTrack5 said:
Hi guys!
I've read a lot around the forums and can't find any info on my problem.
This topic was closest to my problem, so i hope i don't annoy anyone with posting here.
I've followed every step to unlock phone (and it's unlocked) everything went successfully until i came to the recovery part.
Every time i try to start recovery from bootloader my phone hangs on the HTC screen. No matter what i try to do, (tried to erase cache and install recovery again and again) it just hang.
Tried with two different CWM recoveries.
Anyone got an idea why that is? And what i can do to get into recovery mode?
Any help would be greatly appreciated!
I'm new to Android, but man, i love this forum. So much info!
In advance, thank you!
MrD
Click to expand...
Click to collapse
which rom you tried to flash?

Diaeko said:
ive done a backup for my original rom but just a titum backup for the costumrom(so just the apps)
android revolution hd 3.1 and above need to flash the boot.bat thing..i know it sucks
when i stard from scratch..will it format the sd card?
Click to expand...
Click to collapse
starting from scratch won't format your SD card.

i found this... http://forum.xda-developers.com/showthread.php?t=1609190
but after a try my fastboot just let me reinstall recovery (which still wont work) but clear cash etc it keep saying FAILD (remote: not allowed)

what command are you typing? Are you typing "fastboot flash boot boot.img"? Or "fastboot flash recovery endeavoru_recovery_signed.img"?

im typing "fastboot flash recovery recovery.img" (i renamed the file from "..._recovery_...img" into "recovery.img")
and thats the only command that work
EDIT: i tried "fastboot flash boot boot.img" work to...but what does it change?

Okay. Well I am lost. Don't know how to help you out.

thank you for your help till now!!! but did you read the edit?
"EDIT: i tried "fastboot flash boot boot.img" work to...but what does it change?"

Flashing the boot.img only changes the kernel and of course boot.img of the ROM. Wrong boot.img can cause problems too.

[Updated 9/23/2015] A hard bricked N1! Please help me to find the solution!

Hi there I bought Chinese version of N1 and flashed with Taiwan system.img which was great everything was awesome~!
but somehow I was curious what would happen if I install layer manager onto N1 that triggered tragedy of hard brick incident of owning N1 within 3 days. After I install some layer it asked me to reboot to apply the layers so I did and bootloop started.
I could see my tablet as MTP and ADB at that time so I could use ADB command to get bootloader but I couldn't get into recovery so I dug more around on xda-forum and installed it. Some said factory reset will fix all my issues especially bootloop so I didn't worry about what I was doing pressed couple time to navigate Yes factory reset/wipe all in stock recovery mode.
After it wiped it all I didn't know that the bootloop is still exist but I can't find my tablet in computer as ADB anymore but moorefield device with unknown driver exclamation mark so I googled more some suggest to use Intel Phone Flash tool.
So I could install right driver for moorefield also I could navigate the N1 as some device so I can flash something into tablet but I need components to fresh install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes I'm stuck on here now please help or command me what to do!!
updated 09/05/2015 - Still waiting for solution now I will donate who will find out unbrick my N1 through paypal donation. Please help me out!
updated 09/23/2015 - Couldn't find help from anyone so I ordered one more N1 from now, is there any possible to use the data from new tablet to flash or install onto bricked tablet? I heard linux or ubuntu can connect the bricked N1 even it only shows the tablet as MTP on Windows which I can't even see the device's file or folder. Also Intel phone flash tool doesn't support N1 yet and there are nothing possible without ADB connection on Windows which is probably many boot-loop users have the issue.

i'm here with you, same problem T_T, havent got a solution
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
i found dnx and ifwi firmware in Ifwi.zip , but it can not flash

kaikool said:
i'm here with you, same problem T_T, havent got a solution
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
i found dnx and ifwi firmware in Ifwi.zip , but it can not flash
Click to expand...
Click to collapse
Can you give links to these files?

you can download and extract your firmware, here: http://forum.xda-developers.com/showpost.php?p=59750742&postcount=2 , you'll see ifwi.zip. Extract it, then you'll find 4 files:
1.bom-token_ann_a0-mofd_v1-N1.bin, => i dont know
2.dnx_fwr_ann_a0-mofd_v1-N1.bin, => dnx firmware (guess)
3.ifwi_ann_a0-mofd_v1-N1.bin, => iwifi firmware (guess)
4.version => i dont know

daion said:
Hi there I bought Chinese version of N1 and flashed with Taiwan system.img which was great everything was awesome~!
but somehow I was curious what would happen if I install layer manager onto N1 that triggered tragedy of hard brick incident of owning N1 within 3 days. After I install some layer it asked me to reboot to apply the layers so I did and bootloop started.
I could see my tablet as MTP and ADB at that time so I could use ADB command to get bootloader but I couldn't get into recovery so I dug more around on xda-forum and installed it. Some said factory reset will fix all my issues especially bootloop so I didn't worry about what I was doing pressed couple time to navigate Yes factory reset/wipe all in stock recovery mode.
After it wiped it all I didn't know that the bootloop is still exist but I can't find my tablet in computer as ADB anymore but moorefield device with unknown driver exclamation mark so I googled more some suggest to use Intel Phone Flash tool.
So I could install right driver for moorefield also I could navigate the N1 as some device so I can flash something into tablet but I need components to fresh install.
Yes I'm stuck on here now please help or command me what to do!!
updated 09/05/2015 - Still waiting for solution now I will donate who will find out unbrick my N1 through paypal donation. Please help me out!
Click to expand...
Click to collapse
How to flash the Taiwan system. img . I need your help .

Velunce said:
How to flash the Taiwan system. img . I need your help .
Click to expand...
Click to collapse
soondin said:
Thank you for your upload.
I was successfully change to taiwan version.
I use ADB Shell and restore use your file.
My one's build number be A5FM51C.
If any chinese version user already rooted N1.
May be can change from china to taiwan.
1. Move system.img to N1's internal storage
2. ADB shell (enabled debug mode)
3. SU (need accept at your N1)
4. dd if=/sdcard/system.img of=/dev/block/pci/pci0000:00/0000:00:01.0/by-name/system
(/pci/pci0000:00/0000:00:01.0 is my one's directory name but I don't know other N1 is same or not)
5. wait some minute. until done shell command.
6. ignore some error message.
7. exit su and adb shell
8. reboot to recovery (adb reboot recovery)
9. wipe cache.
10. reboot N1 and it will update.
I don't try wipe data partion at recovery.
Cause My one is A5CN51C.
I will make some more screen shot like can find google Chrome at playstore.
Click to expand...
Click to collapse
I followed the way it's in Nokia N1 general forum.

daion said:
I followed the way it's in Nokia N1 general forum.
Click to expand...
Click to collapse
I would not recommend any further, i have flashed alot with that program (custom flashing) as i had the layers theme brick too, and after like 30 flashings of recovery, system, iwifi etc (flashed but without success) my bootloader now shows a locked state where i cannot flash anything anymore (i was on 5.0.2 but i wiped my system by accident instead of factory reset to recover from layer theme), so don't flash to much or to reckless as this will lock down your nokia completly like mine. (I now regret buying it though)