Related
I installed this version to my phone yesterday (see the attachment) and since I have nothing to complain about (has there ever been ), I decided to share this release with the community.
Few facts about this version:
INTERNAL release (not official, obviously)
It is 2.1 Eclair
Build time: 2010.08.06 23:20:57 KST
Changelog: Unknown
PDA version I9000XWJM6, MODEM version I9000XXJM3
All CSC versions are I9000???JM1 and unbranded, but CSC´s for specific operators (Vodafone for example) are included.
I have not modified the code in any way, although I have repacked the release to make CSC selection possible.
Usually Odin3 images are provided in a single integrated .tar package which contain all of the necessary files. This way the CSC cannot be selected separately.
That is why I splitted the release in three different parts (CODE, MODEM, CSC).
Since Odin3 has flashfile checksum support I also added md5 hash tail to the .tar files. This way is more secure because Odin will not allow flashing corrupted images. Flashing takes a bit longer thou because the checksums are checked in the beginning of the update process.
You need to download two files.
GT-I9000_I9000XWJM6_I9000XXJM3_CODE-MODEM.rar
CSC_I9000???JM1 (CSC of your selection)
I know this is not nearly all of the excisting variants, but repacking the softwares is quite a slow process for certain reasons. I have access to pretty much any Samsung firmware, so if you find a variant missing you can send me pm. I can have a look.
Here is the description of CSC´s (included country variants):
DBT (Germany specific)
OXA *Multi CSC* (for France, Germany, Italy, Poland, UK, UK & Ireland)
OXE *Multi CSC* (for Baltic, Kazakhstan, Russia, Ukraine)
OXX *Multi CSC* (for Austria, Baltic, Bulgaria, Croatia, Czech Republic, Greece, Hungary, Ireland, Macedonia, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, South Africa, Switzerland)
BMC *Multi CSC* Unbranded / Custom apps: (Canada)
HUI Branded: (Tre - H3G Italy)
OLB *Multi CSC* Unbranded / Branded: (Indonesia, Malaysia, Philippines, Singapore, Thailand, Vietnam)
OPS Unbranded / Custom apps: (Optus Australia)
XEE - Nordic: (Denmark, Finland, Iceland, Norway, Sweden).
TMN Branded: (TMN Portugal)
Download links:
GT-I9000_I9000XWJM6_I9000XXJM3_CODE-MODEM.rar
CSC_I9000DBTJM1.rar
CSC_I9000OXAJM1.rar
CSC_I9000OXEJM1.rar
CSC_I9000OXXJM1.rar
CSC_I9000BMCJH2.rar
CSC_I9000HUIHUI.rar
CSC_I9000OLBJG4.rar
CSC_I9000OPSJG1.rar
CSC_I9000XEEJM1.rar
CSC_I9000TMNJM1.rar
Special request:
I9000OXAJF6
Mock-up, check post #182 for further information.
Extract the downloaded .rar archives to the same folder.
The archives are contain .tar.md5 files. Do not open them with Winrar for example. They are compressed Odin images which do not need unpacking.
So how to proceed:
Put your phone to download mode (hold down: volume down, home key, power)
DO NOT plug in your phone yet, Odin / driver does not like it at this stage.
Start Odin3
Tick "Re-Partition", check that "Auto Reboot" and "F. Reset Time" have been ticked.
Click "PIT" button and select s1_odin_20100512.pit file.
Plug in the phone and wait until Odin finds it.
Click "Start" button... <Firmware update start...> <Get PIT for mapping...> appear. The phone will turn off and the screen indicates "Reset". Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
Click "PDA" button and select "CODE_I9000XWJM6.tar.md5" file.
Click "MODEM" button and select "MODEM_I9000XXJM3.tar.md5" file.
Click "CSC" button and select the desired version "CSC_I9000???JM1.tar.md5".
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
When using *Multi CSC* you need to type *#272*????# after the flash (in dialer). ???? being the current time displayed by phone. For example if the time is currently 6.25pm you need to type *#272*0625#. Then select the desired CSC version from the list and press "Install".
Regards.
- Nottingham
Looks good, but mind if I ask where you're getting the FWs?
ShezUK said:
Looks good, but mind if I ask where you're getting the FWs?
Click to expand...
Click to collapse
I guess from the same place pretty much every release is.
Cannot go into the specifics, sorry.
anybody tried this one ??!! how does it compare to JM5 and samset 1.9f ??
Downloading.
Will you be providing regular FW releases? apparently the guy from samsung-firmwares isn't getting any so it'd be nice to have a regular source for newer versions
Spybreak said:
Will you be providing regular FW releases? apparently the guy from samsung-firmwares isn't getting any so it'd be nice to have a regular source for newer versions
Click to expand...
Click to collapse
Maybe.
One user requested a CSC for T-Mobile Hungary.
Here is the link.
CSC_I9000TMHJM2
Ah nice I'll give this a bash after work tomorrow in the name of science and fannying around!
Does anybody fancy sticking Quadrant benchmark results up in the mean time?
Installing now and doing 1 click lag fix 4.0+SU Access+89 apps so i can post in 30 min my quadrant results
Richthofen said:
Maybe.
Click to expand...
Click to collapse
I think everyone wants a froyo firmware, any chance of that happening?
Just flashed. Looks identical to JM2. I cannot try many things now (it's 2 AM here ).
You may want to add that spanish carrier Movistar is also supported. Detected the SIM and connected. Calls working. Wifi working. GPS unknown, I'm not going outside to try it now...
vcespon said:
You may want to add that spanish carrier Movistar is also supported. Detected the SIM and connected. Calls working.
Click to expand...
Click to collapse
Yes, CSC is not critical for the phone.
It just contains (possible) operator customizations, country specific operator infos (APN´s etc) and sets preferences like default language.
Identical to JM2?!
Turn off the phone and you´ll see a difference
There is any difference compared to JM5?
What about GPS and lag?
Wait, don't tell me this has a built-in lag fix?!
cba1986 said:
There is any difference compared to JM5?
What about GPS and lag?
Click to expand...
Click to collapse
Same Question
Improvments
I understand that some tweaks were put into one of the latest roms (forgotten the name) such as improved ram management and better battery life to name a few. Are this improvements also incoroprated into this rom? And would you be able to give a froyo release at the end of the month, i mean samsung should have deffinitly completed the rom by the last week of August if they want to test it and allow carries to mod it in time for end of september... right?
Quadrant says:
863
No lagfix
Just flashed and there's definitely an improvement in apploading speed(running 15 apps doesn't result in a black screen anymore when launching new ones). This is without any lagfix applied(was running jm5 + oneclick 2-3). Gonna try the gps now!
Numbers means anything. JH2 also gets that numbers and people reports that this FW it's much more fluid.
jim_panse said:
Quadrant says:
863
No lagfix
Click to expand...
Click to collapse
Quadrant scores mean zilch. Had 2358 before and the phone ran noticeably slower than my friend's desire.
Hi All
Im looking for a specific CSC file if any of you have it plz could you upload it for me so i could DL it from somewhere
The CSC file i need is for the XFV region
From what i could tell in version histories there are only a few of them out but i would like to see if there is a easier way to fix the you cannot update the firmware issue so we could probably document it properly.
The firmware dont really matter as i have most of them from samfirmware but i would like to replace the CSC to see if that would fix the problem.
This is for experimental purposes only and in no way will i or have a need to downgrade to a official firmware but seeing as i live in SA its hard to get the local CSC if everything is in the XEU region
Please check if you have one and let me know. I have a treory in terms of assisting ppl to get back on track with official firmware if they want to upgrade that way seeing as Bada 2.0 is close and a lot of ppl will want to go to the official release.
Have you tried the new Kies 2 hack found in the galaxy forum? it works well with bada due to there are all on the same server. I dont know yet how to find it, the forum is to huge.
larioteo said:
Have you tried the new Kies 2 hack found in the galaxy forum? it works well with bada due to there are all on the same server. I dont know yet how to find it, the forum is to huge.
Click to expand...
Click to collapse
No idea. I was looking around but the CSC file still reffers in registry to the Kies software. The problem with that is that your geographical location gets picked up by the Kies software and if that dont match your CSC you wont be able to trick it in updating your FW over Kies.
I want to test that and see if that makes a difference because your productcode can also still be changed in the registry but you need the correct CSC
If it works everyone that want to manually flash has a 5 step fix to revert to original. Im just testing a theory
Please see if you can find that and share it Thanks
That with geographical is not true, i am using german firmwares and i can update through kies in austria, already flashed korean versions and everything works.
Manually you cannot change the settings, maybe your firmware configuration is mismatched.
larioteo said:
That with geographical is not true, i am using german firmwares and i can update through kies in austria, already flashed korean versions and everything works.
Manually you cannot change the settings, maybe your firmware configuration is mismatched.
Click to expand...
Click to collapse
Last night i tested this and flashed back to XXJEG witch was one of the 1st firmwares out and knowing there is a update after that it still stated the same that the FW cant be updated. I have also tested multiple CSC FW combinations and cant get it to simulate my region to be able to update from Kies
Currently my Config looks like this
FW: S8500XXJL2
CSC: S8500OXDJL1
I installed JID and updated to JL2 witch atm is the most stable build i could find.
I can give you my xxji5 multi which contains every csc for open europe.
It is one combilation that i have made, in this time slyfer (my firmware downloader) have given me access to every samsung firmware.
It should solve your problems A bada 1.2 firmware with all csc i don't have, after the JL2 the downloader stopped to work, sorry.
You can choose what you want.
larioteo said:
I can give you my xxji5 multi which contains every csc for open europe.
It is one combilation that i have made, in this time slyfer (my firmware downloader) have given me access to every samsung firmware.
It should solve your problems A bada 1.2 firmware with all csc i don't have, after the JL2 the downloader stopped to work, sorry.
You can choose what you want.
Click to expand...
Click to collapse
OMG dude you are a legend
Add me on skype: bubblethe1
I need the last 3 on that list as they are all to my country area
The XFA, XFE and XFM of you could just upload them somewhere so i could DL them if you dont mind
Here is the list i could use in terms of CSC
South Africa.
XFA = SOUTH AFRICA
XFC = SOUTH AFRICA
XFM = SOUTH AFRICA
XFV = SOUTH ARFICA
XFE = SOUTH AFRICA
Hello toxicdust, you can use the Kies Registry Patcher as suggested by larioteo to install any firmware of your choice from kies.
It works and it's very simple to use. Like larioteo, I have also installed several firmwares from different regions from kies without problems.
I will give you a short tutorial on how to do this. You can also save the firmware that kies uses when upgrading your phone by extracting the files.
Now here is the tutorial. A screenshot is also attached.
HOW TO USE KIES PATCHER TO UPGRADE WAVE
1. Launch Samsung Kies.
2. Connect phone in kies mode (make sure phone is detected by kies).
3. With phone connected to kies, launch Kies Registry Patcher as Administrator
(Note: If you have previously connected more than one phone in kies,
you will be prompted that you need to cleanup regustry.
Accept/say yes, and then continue from nº 3 above, that is, start over again).
In kies Registry patcher,
- Click on the menu "Basic"
- In the option, "Enable Spoof" select "True"
- In the option, "Spoof Product Code as" Select "XFC" (e.g South Africa).
- In the option, "Spoof Software Revision as" enter any previous firmware version/csc for South Africa
example with Europe OXC previous firmware, "S8500XXJF7/S8500OXCJF3" (without the quotes).
- In the option, "Kies Version" enter the installed kies version. (By default, displays automatically).
4. After entering above information, now click on the button "Write Registry" to enter the data to registry.
5. Finally, go to kies and click on "Upgrade Firmware" and "Accept".
6. Kies will display that there is a new firmware version (e.g. S8500XXJL2/S8500OXCJL1).
7. Just click on accept and the upgrade process in kies will begin. That's all.
CAUTION:
Make sure you return kies patcher back to "False" after using, otherwise the app will be active at the background.
- In the option, "Enable Spoof" select "False"
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Download kies2.0 Registry Patcher from here: http://www.megaupload.com/?d=Q3ZWSE0O
Thanks a lot. Will try that tonight quick to see what the results are. Will let you know
OK then i wait, i am currently developing if you need the files i will post it for you or send you via skype.
Ok just checked now on this list for the release referances
http://www.scribd.com/doc/47859691/Samsung-Firmware-Langpacks-Descriptions-09-2010
The last official update combination was
PHONE: S8500JBJI2 CSC: S8500XFVJI2 - Bada 1.0
and
PHONE: S8500XXJF1 CSC: S8500XFVJF1 - Bada 1.0
Using both the combinations it says that there is no firmware update and this is the latest version.
Should i update to one of them to find out what the latest combination is because both cant be right right ?
Cross Version Updates can go in a bad way, you need first a full open firmware that is also available in your firmware revision.
Firmware Version Example: S8500XXJI5 (The base)
Config Version Example: S8500OXAJI5
The configs are not important if a other is available for your country, if not, then it it also important,
Litte differences can cause also a reboot loop.
toxicdust said:
The last official update combination was
PHONE: S8500JBJI2 CSC: S8500XFVJI2 - Bada 1.0
and
PHONE: S8500XXJF1 CSC: S8500XFVJF1 - Bada 1.0
Using both the combinations it says that there is no firmware update and this is the latest version.
Should i update to one of them to find out what the latest combination is because both cant be right right ?
Click to expand...
Click to collapse
Yes, wrong combination of firmware(PDA) and CSC can lead to an endless booting of phone.
Please use a correct combination of the firmware files for South Africa. If possible, install an earlier version of kies
[say, Kies_1.5.3.10103_102_1 (19 Nov 2010) or Kies_2.0.0.11011_16_5 (05 Jan 2011)].
This is because most recent versions of kies read firmware versions direct from the phone.
I have personally used the above versions with Kies Patcher and they worked successfully.
But when I tried with the latest kies version [Kies_2.0.1.11053_66_6 (15 June 2011)],
hoping to trick kies by entering an old firmware version (S8500XXJF4/S8500XENJF3) into Kies Patcher,
kies deteted that there is a firmware upgrade for my phone. When I clicked to upgrade, kies stopped half-way,
displaying that the latest firmware XXJL2 is already installed on my phone.
So to avoid this happening in your case, install an earlier kies version, and use kies patcher to upgrade your phone.
I include below some firmware combinations for South Africa. Try the combinations one by one (starting from the unbranded firmwares).
Hopefully one of them will work for you. Best of luck.
1. NOT BRANDED FIRMWARE
CODE * COUNTRY * FIRMWARE * CSC
==========================================
XFM (SOUTH AFRICA) S8500XXJL2/S8500XFMJL1
XFM (SOUTH AFRICA) S8500XXJL4/S8500XFMJL3
XFA (SOUTH AFRICA) S8500XXJL2/S8500XFAJL1
XFA (SOUTH AFRICA) S8500XXJL4/S8500XFAJL3
XFE (SOUTH AFRICA) S8500XXJL3/S8500XFEJL2
XFE (SOUTH AFRICA) S8500XXJL2/S8500XFEJL1
XFE (SOUTH AFRICA) S8500XXJI5/S8500XFEJH1
XFC (SOUTH AFRICA) S8500XXJF1/S8500OXXJEG
XFC (SOUTH AFRICA) S8500XXJH3/S8500XFAJH1
XFM (SOUTH AFRICA) S8500XXJH3/S8500XFMJH1
XFE (SOUTH AFRICA) S8500XXJH3/S8500XFEJH1
XFA (SOUTH AFRICA) S8500XXJF1/S8500OXXJEG
XFA (SOUTH AFRICA) S8500XXJH3/S8500XFAJH1
2. BRANDED FIRMWARE
CODE * COUNTRY * FIRMWARE * CSC
==========================================
XFV (SOUTH AFRICA) S8500JBJL2/S8500XFVJL2
XFV (SOUTH AFRICA) S8500JBJL1/S8500XFVJL1
Thanks a lot for the most recent combinations... I'll have a look at these. Seeing as i have JL2 installed i will see if i cant trinck it in updating to JL4
Hi, I have a Note2 (n7100) for almost a month now and I cannot update its software to the latest which is 4.1.2.
My phone keeps saying that I already have the latest one but I still have the 4.1.1... I also installed Kies on my PC also shows that I have the latest firmware.
My phone is not rooted. Could please help me? Do I need to change some settings on it.
Not only you but many others also having this, likely this is from samsung server issue not on your device. Or may be your country have not received update yet.
Simply download latest ROM and flash using it Odin, really odin is much safer and stable then Kies.
you can get more info from my signature, read N7100 All in One.
dr.ketan said:
Not only you but many others also having this, likely this is from samsung server issue not on your device. Or may be your country have not received update yet.
Simply download latest ROM and flash using it Odin, really odin is much safer and stable then Kies.
you can get more info from my signature, read N7100 All in One.
Click to expand...
Click to collapse
Thanks for the reply. I would like to know where can I download the official firmware that fit to my phone? Can I use firmware based in Regions Supported: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom. OR I need to download a different one.
below is the information of my phone
Baseband version: N7100XXALJ2
Kernel version: 3.0.31-310959 [email protected] #1 SMP PREEMT
Build number : JRO03C.N7100XXALJ3
Hope to hear from you soon.
*** Using ODIN means just only update the firmware not rooting it? Because I do not want to root my phone. Just update it to the latest one.
Can you input here what you are getting by dialing *#1234#
minitokyo said:
Thanks for the reply. I would like to know where can I download the official firmware that fit to my phone? Can I use firmware based in Regions Supported: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom. OR I need to download a different one.
below is the information of my phone
Baseband version: N7100XXALJ2
Kernel version: 3.0.31-310959 [email protected] #1 SMP PREEMT
Build number : JRO03C.N7100XXALJ3
Hope to hear from you soon.
*** Using ODIN means just only update the firmware not rooting it? Because I do not want to root my phone. Just update it to the latest one.
Click to expand...
Click to collapse
Search 'samsung update' using Google, download any note 2 firmware you desire... (Don't worry I flashed France firmware although my phone is from Korea, it works perfectly)
Flash the firmware using ODIN...
1. DOWNLOAD Note 2 firmware (any)
2. Extract the zip file (Firmware that you downloaded)
3. Open ODIN, browse the md5 file in PDA...
4. Flash it
Done, easy... This WILL NOT ROOT your device... DON'T WORRY!
GOOD LUCK
SORRY FOR MY BAD ENGLISH
Sent from my GT-N7100 using xda premium
Samsung Note2 unable to update
I have e same problem as minitokyo. I bought my note2 when 1st launched (1st batch), and software version is now 4.1.1. My phone is registered in Singapore with service provider Starhub. My phone runs on the generic platform instead of the service provider Starhub's platform . When i tried to update to 4.1.2 a few weeks ago, it says that i have "have the latest software installed". I just cant get it updated via phone (ota) or via computer (kies). I called Samsung , they cant explain too, other than offering to reset my phone to factory settings , which will erase all my data, so i do not want that. Until today, .i also cannot update. Where is the problem ?
hi, i have problem with display a want send my phone to repair center,
but a forgot oficial firmware location csc/pda and others
i have 3.oficial stock rom
Region: O2C (Czech Republic (O2C)) PDA: I9195XXUAMG4 Changelist: 1097013
O2C (Czech Republic (O2C)) PDA: I9195XXUAMF7 Changelist: 891972
TMZ (Czech Republic (T-Mobile)) PDA: I9195XXUAMF6 Changelist: 876741
samebody help witch rom flash to my phone ?
i have buy in alza.cz
Diego009 said:
hi, i have problem with display a want send my phone to repair center,
but a forgot oficial firmware location csc/pda and others
i have 3.oficial stock rom
Region: O2C (Czech Republic (O2C)) PDA: I9195XXUAMG4 Changelist: 1097013
O2C (Czech Republic (O2C)) PDA: I9195XXUAMF7 Changelist: 891972
TMZ (Czech Republic (T-Mobile)) PDA: I9195XXUAMF6 Changelist: 876741
samebody help witch rom flash to my phone ?
i have buy in alza.cz
Click to expand...
Click to collapse
Hi,
I personally bought in O2, so I am sure I have got I9195XXUAMG4. In order to get Cyanogenmod, I had to rooted it. Now I want to go completely back, original recovery and ROM, but did not find any guide for it
hy,
look on the box of mobile, is a code like GT-I9195ZKACOA for my case; then code for my region is COA;
if your region is O2C then flash I9195XXUAMG4 firmware
b0g said:
hy,
look on the box of mobile, is a code like GT-I9195ZKACOA for my case; then code for my region is COA;
if your region is O2C then flash I9195XXUAMG4 firmware
Click to expand...
Click to collapse
on box of mobile is nothig but this one
hy,
if you buy from www.alza.cz , i find in this site 4 models of samsung i9195:
GT-I9195ZKAETL, GT-I9195ZBAETL, GT-I9195ZRAETL and GT-I9195ZWAETL , all models has region ETL you can check your self;
now you check on http://www.sammobile.com/firmwares/2/ your firmware for ETL region and you will find
Latest firmware info
GT-I9195 Galaxy S4 mini LTE
PDA: I9195XXUAMG8
CSC: I9195OXXAMG4
MODEM: I9195XXUAMG8
Added: 2013-08-15
downloaded and flashed to your mobile, good luck
b0g said:
hy,
if you buy from www.alza.cz , i find in this site 4 models of samsung i9195:
GT-I9195ZKAETL, GT-I9195ZBAETL, GT-I9195ZRAETL and GT-I9195ZWAETL , all models has region ETL you can check your self;
now you check on http://www.sammobile.com/firmwares/2/ your firmware for ETL region and you will find
Latest firmware info
GT-I9195 Galaxy S4 mini LTE
PDA: I9195XXUAMG8
CSC: I9195OXXAMG4
MODEM: I9195XXUAMG8
Added: 2013-08-15
downloaded and flashed to your mobile, good luck
Click to expand...
Click to collapse
Yes, I believe he is right, because you should remember it when the phone starts, it shows O2 carrier blue screen... if you do not remember that, you definitely do not have O2C... the same with T-Mobile version.
boot loop
thanks for info , now i tried flashed with odin v3.07 in log odns: ok sucesfuly but after reboot phone
boot loop !
Diego009 said:
thanks for info , now i tried flashed with odin v3.07 in log odns: ok sucesfuly but after reboot phone
boot loop !
Click to expand...
Click to collapse
go to recovery, make full wipe data
przem00 said:
go to recovery, make full wipe data
Click to expand...
Click to collapse
its works thanks
If you bought your TabPro 10.1 Wifi (SM-T520) in Sweden, What is your firmware?
My states:
Kompileringsnr
KOT49H.T520ZSUANE1
But I boght mine in Hong Kong (TGY). This is a problem for me, when I trie to connect a bluetooth keyboard, it will be english, can't have the layout in swedish.
TabProUser said:
If you bought your TabPro 10.1 Wifi (SM-T520) in Sweden, What is your firmware?
My states:
Kompileringsnr
KOT49H.T520ZSUANE1
But I boght mine in Hong Kong (TGY). This is a problem for me, when I trie to connect a bluetooth keyboard, it will be english, can't have the layout in swedish.
Click to expand...
Click to collapse
The Swedish (Nordic) firmware for your device is T520XXUANF4.
You can download it at SamMobile.
Thank you Luxation. I acctually went to the store today, brought my phone and photoed a SM-T520 and it showed KOT49H.T520XXXUANA7_LLK. But if I take a guess, it would be the NEE down below not the SEB.
Nordic countries - NEE
Latest firmware info
PDA: T520XXUANF4
CSC: T520NEEANF2
MODEM: T520XXUANF4
or Baltic - SEB
Latest firmware info
PDA: T520XXUANF4
CSC: T520SEBANF1
MODEM: T520XXUANF4
Just want to say to who ever it may consern. If u brought a SM-T520 abroad and have problem with external devices such keyboards and such. For me living in sweden the NEE upgrade did it.
Download firmware from Sammobile and Odin from any of the links of this forum. Do NOT google it and download, cause they are often full of malware.
Here is a link when those above is downloaded to follow: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Also, I used Odin 3.09 where PDA changed name to AP. When flashing new firmware, you will not need to root the device. Also, KNOX still remain 0 and there should not be any intrusion in warranty.
Just, before upgrading I pushed HOME. Volume + (not -) and then POWER to go to ehm.... well not Downloading mode. I whiped cache, and then factory reset. Just to ensure no problems.
Kind Regards