Develop Bugs

My Seidio Spring-Clip Holster (belt clip) review.

Review: HTC EVO 4G Seidio Spring-Clip Holster (non-cased phone) (MSRP: US$29.95)
Photo Gallery:
Easy to remove!
Tight, close fit to show off your shiny, new EVO!
High-quality plastic makes this one tough case and holds the EVO nicely!
Felt backing unlike anything that I have seen in a holster to protect the screen!
Introduction:
I would just like to start off by saying that, like many of you, I absolutely could not wait to get my hands on the brand new Sprint HTC EVO 4G. Also like many of you, the thought of scratching, dinging, or cracking my brand new EVO just makes me cringe. Also, the dust issues that the HTC Hero had drove me crazy, and I couldn’t stand having any dust in or on my EVO. This is precisely why I’ve chosen not to carry my EVO in my pocket (as I have done with every phone I’ve owned before) in favor of carrying it on my belt. The Seidio Spring-Clip Holster provides the exact remedy to my situation, and it does its job wonderfully.
Initial Impressions:
The first thing that I noticed when I opened my holster was the fact that, unlike any that I had used or seen before, it had a felt interior to protect the EVO’s large glass screen from any sort of scratches or potential dust build-up that tends to find its way into plastic cases. The plastic is very solid, and it is fairly hard to flex. Both the belt clip and the spring-clip used to hold the EVO in place are very sturdy and snappy.
Daily Use:
The slanted ridge on the spring-clip makes sliding the EVO into place a breeze. It felt very natural to just slide my EVO into place after just a couple minutes of use. The clip locks it firmly into place, and it even features a tiny groove in the plastic to ensure that it does no come into contact with the EVO’s power button (I didn’t even notice this until I became curious as to why it never triggered standby mode off). In order to make sure that nothing would become of my EVO in some high-speed conditions, I even tested some rapid, short movements to make sure there was no chance of the phone slipping out. The belt clip itself is able to be positioned in seven different positions for whatever you prefer. Personally (as a fairly thin person), I prefer to keep the holster in the upright position for the most comfortable feel. The EVO, being the heavy-weight it is, adds a fair amount of weight to your belt, but everything just feels natural. I actually prefer the weight because it lets me know everything is still there.
Conclusion:
I’d definitely recommend this to anyone getting an EVO who is either concerned about damaging their device or just wants a nice, professional way to carry (and show off!) their EVO. I find that it is worth every cent because the craftsmanship and quality of materials of Seidio products is second to none! I’ve never had any issues with one of their cases, and I don’t expect to have any with my belt clip. I would also like to remind everyone that there is also a holster available that is compatible with Seidio’s Innocase so you can protect your phone with a solid case and carry it on your hip to protect it from dust, dirt, and lint in your pocket.

I'm impressed!

I have the holster/case combo for my Nexus and it is awesome. Best holster i've ever owned for a phone the springloaded top clip is the bees knees LOL Plan to get this same one you have for my EVO.

I just ordered my case and holster combo from Amazon (half the price than the Seido site)

I had a holster like this for my Treo and really liked it, especially how it tightly hugged my side rather than sticking out like many other clip/holster cases.
The one question I have is how well it will work if you have one of those full-body super-thin skins (like Inivisible Shield or the cheaper versions from BestSkinsEver).
From past experience I found that the corners of the skins sometimes tend to peel away from the repeated sliding in/out of the holster. But I love those skins because they completely prevent scratches and add almost no bulk (but no drop-protection).
Hoping they get the caseless model of the Seidio holster on Amazon (less expensive and free shipping with Prime).

I can't take the cover off for the life of me lol
Any tips?
-------------------------------------
Sent via my EVO using XDA Tapatalk

hchavarria said:
I just ordered my case and holster combo from Amazon (half the price than the Seido site)
Click to expand...
Click to collapse
Thanks for the tip, ordered my combo for 39.

I just got this earlier today. Took pics, and was going to write a review, but I see a great one is already up. I really like this.
I wanted a Krusell case, but they don't make the style I want, big enough for the evo. http://krusell.se/products/1/?catid=50&productid=2854
I found this on Amazon, and it comes in a close second, for me. Wanted a way to carry the phone, but did not want a snap on case adding to the considerable size of the evo. Frankly, drop a phone with the Seidio snap on case, and your Evo will be just as well off, without the case.
Anyway, really just a bump to the review. I jumped all around, and could not get the phone to fall off

Great review. I had just ordered my Spring Clip and Phantom Skinz Carbon Fiber skin yesterday and can't wait to get them. Thanks for the great review as it seems I made the right choice.

Does anyone know if full body zagg or the like can be used with these holsters?
Sent from my Evo 4g using XDA app!

dynasty77 said:
Does anyone know if full body zagg or the like can be used with these holsters?
Sent from my Evo 4g using XDA app!
Click to expand...
Click to collapse
Yes. I have the Chromatic Carbon Fiber skin and clear screen guard from Phantom Skinz and it fits perfect.

Excellent write up, thank you. Based in large part on this thread I just got the combo set from amazon. I hope I didn't just get evo_rick_rolled.

dynasty77 said:
Does anyone know if full body zagg or the like can be used with these holsters?
Sent from my Evo 4g using XDA app!
Click to expand...
Click to collapse
you should be ok, might be a little tight tho
also, the holster will leave some marks on the screen protector... where the screen touches the holster on the inside. this is the reason i went with a hard plastic screen protector like http://www.clarivue.com/htc-evo-4g-screen-protector.html
over all i love these holsters, i have used them on 3 diff phones so far... i do have one of these for the naked Evo im not using that im willing to sell... im using the active case and holster now and i have the rugged on its way.

Mayonesa said:
you should be ok, might be a little tight tho
also, the holster will leave some marks on the screen protector... where the screen touches the holster on the inside. this is the reason i went with a hard plastic screen protector like http://www.clarivue.com/htc-evo-4g-screen-protector.html
over all i love these holsters, i have used them on 3 diff phones so far... i do have one of these for the naked Evo im not using that im willing to sell... im using the active case and holster now and i have the rugged on its way.
Click to expand...
Click to collapse
I haven't had mine make any marks on my naked screen. Given, that may be because there is no extra thickness from the screen protector and the case it just designed that well.

Universal sleeve for the Captivate?

I'm looking for a universal sleeve (like with BlackBerrys) that fit the Captivate. The inner material has to be really soft, so as not to scratch the phone (obviously). Does anyone know of an easily obtainable and inexpensive product that meets this description?

Is this () what you may be looking for? I had bought this for the Samsung Blackjack II. It fits the Captivate nice and snug too. Samsung branded, good quality, its on Amazon for $6.46.
If the link does not show up in this post put a general search on Amazon for "Samsung i607 Blackjack Flat Lthr Pouch".

I got the neoprene case on ebay for the htc evo
hxxp://cgi.ebay.com/Original-Neoprene-Case-Pouch-HTC-EVO-4G-4-G-/280537161004?pt=PDA_Accessories&hash=item4151515d2c
it fits the captivate perfectly, but it does have the htc logo on the front that may bother you

pdair makes one specifically for the captivate
http://goo.gl/RYhF
I've been looking for the same thing... EVERYWHERE.... so far this is the only one I can find, and I believe at this point I'm just going to give in and buy it

got my case from pdair... while not what I really wanting it will work...
some more info for those who care:
the inside isn't lined, it's just soft leather.
sides are not solid and by that I mean like this: http://goo.gl/m6Ry obviously different styles but the side is constructed the same, with the top and bottom portions open and a bit of elastic in the middle.
it fits perfect, and it's about as thick/bulky as you'd expect. which leads me to believe it would help a lot in a fall/drop.
seems sturdy and well made all in all a good product.

You could try something like this over at Fommy: http://bit.ly/dAoHBI
I had one like this on my Tilt2 before and worked out pretty well. I was thinking of getting one for my Captivate before I ended up going with a TPU case.
I believe they also have horizontal cases, and other pouches that fit our phones.

they have a case like this at walmart and it didn't fit very well... I guess I'm just worried that a generic case wont fit the phone properly since every generic case Ive tried to fit it in so far has failed to come close to a decent fit.
at $15 I might give it a go though, thanks

This is exactly what I've been looking for. Has any one found one that fits nice and is made for the captivate. I've gone to fry's, bestbuy, radio shack, and walmart, even ones I've found in gas stations don't fit right. Bout to break down and make one.
From a phone on an app

http://bit.ly/c64f91
I bought this when i got my captivate. You can fit the phone in it, but the sleeve is too short for captivate, which block the top part of the sleeve that is meant to close to keep the phone from coming out easily. The phone will slide out if you put the sleeve upside down, but its not a problem for me, so i am still using it.

I too wanted a BlackBerry style sleeve. This is what I use-
krusell-gaia-mobile-pouch
I can't post a link or I would, but I got mine at the AndroidCentral store.
The BB sleeve has those nice rubberized edges to help cushion a fall, and those sleeves are a "little" more stiff than this one, which is mostly just pseudo-leather with a soft inner lining. The edge may still help on a drop, but the most important part...
It goes in and out of your pants pocket nicely while in the sleeve.

Accessories Suck

The accessories suck for this phone, like 2 crappy cases available. maybe 3.
anyone find anything descent?

I agree, this phone is largely being ignored by that accessory makers in favor of the hotter, sexier phones. Still, I managed to find this case on Amazon: http://www.amazon.com/gp/product/B003NY7CVU . Very well made and fits the phone perfectly. I did a slight mod on mine and cut a small rectangle out of the side so I can charge the phone without having to take it out of its case. Otherwise, have only tried one screen protector, which turned out to be junk.

bandroidx, I think I have most of the cases available on the market. The Amzer rubber cases are inexpensive (9.95) on Amazon. They are grippy and secure on the phone. The Otterbox Commuter is nice also and available at Amazon. It is a two piece design with a hard plastic exterior that wraps around a rubber inner liner. I also got a Speckcase from AT&T when I first got the phone. The case was an early production and lacked a cutout in the rear for the speaker. This has since been remedied. I didnt care for it as much because it is so secure around the phone that it is hard to get in and out to access battery. Hope this helps.

I got a nice rubber form fitting case with all the cutouts and a wide selection of colors on Amazon for $1.25+$2.95 shipping, as far as a screen cover, I haven't needed one with the gorilla glass it features.
amazon.com search for Cbus wireless, they ship quick too!

The only case we have at ATT Cor stores are the *speck cases. They look great and fit well but they cover the speakerphone so if you rely SP your out of luck.
I use an invisible shield case on mine. Works great and has definitely helped protect my phone and makes it easier to wipe down.

I got an otter box and love it and they're only like thirty three at amazon which isn't much more than the spec. The defender.
Sent from my MB520 using XDA App

i got the hard plastic cover case from ATT pretty suckish and i really dont use it at all, i only use the screen protector

It would be nice to see some sort of car dock for music/nav in the car. Im not a huge fan of cases because of the rubber-like outside already on the phone.

You tried googlin international online stores?

Otterbox
+1 for Otterbox, great case with good protection and fit

I just don't like how the proximity sensor is just open. Dust gets in like crazy.
Sent from my MB520 using XDA Premium App

given that its not high end phone its no surprise there few accessories are available at the moment.
i'd love an extended battery more than anything else. i'm a heavy user.

can anyone recommend a nice one? i'm not sure what to get.

I wiah we had better accessories

the used bravo i just got has a otter box commuter case on it, im really not imppressed with the fit, its big. on my friends evo 4g is big too.
so anyways im buying a couple of ebay rubber cases. if there are good, i will post the link and some pics when i get them

Having an idea to make my own car and home docks. Phone reacts to magnet around the usb port. Idea idea. Also I saw a dock at an AT&T store that looked like one for the bravo but one little detail, the usb would be backwards from our phone. Take it apart and just turn it around? Hmm.......

after 3 days ordered i got these cases, i got them from this seller http://myworld.ebay.com/shipmaster8/?_trksid=p4340.l2559
link to item
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230700814358#ht_888wt_1037
they are 5.75 for 2 free shipping, really good fit maybe just 1-2 mm off, doesnt effect anything, its real good for the price fast shipping. i wound say much better quality than the otter box commuter. beefier too, not very bulky
i also got these films, very good too
http://www.ebay.com/itm/26084281342...X:IT&_trksid=p3984.m1439.l2649#ht_1509wt_1037
here are the pics

Here's some good accessories!
Of course everything is on eBay.
Desktop Charging Dock
Wall Dock + Extra BF5X Battery, Cheap! I would buy it just for the battery.
Search Results for the tons of cases now available + Screen protectors too. I really like the look of the Carbon Fiber case. Going on a shopping spree in February. Budgeted $800 for eBay stuff.

Review: "Grid" exercise armband works with cases!

If you search for "galaxy s3 grid armband" on eBay, you'll find it. I bought from "wanghaostore".
It's also listed under other names, you can search further under "galaxy s3 sport armband" once you know what the auction picture looks like.
The armband came a bit folded in half probably from shipping, I need to set something heavy on it to flatten it out....
Fit
The armband fits really good. All the buttons are accessible. You can change the volume while running, as well as easily access the ports and power button.
The armband also works with cases! As you can see in the last picture I have my diztronic TPU case on it.
Feel
The material is a little scratchy, but overall it's comfortable and will stay put on the arm. It's a tech-fabric material with what looks like a nylon weave "cushion" underneath.
It should be pretty sweat-resistant, the material where the phone sits is neoprene, so it shouldn't absorb sweat or scratch the phone.
The strap length is a bit on the short side. It fits for me, I have 13-14 inch biceps. It could probably go up to 19-20 inch biceps, but beyond that you might need a different holster. Smallest it could go is probably around 11-12 inches.
Usability
I always have problems with the plastic screen protector on armbands bubbling up. With this one the case stretches it, so I can easily use the phone while its on my arm. I don't anticipate issues being able to slide or use Pandora.
The main benefit of the armband is also its biggest detriment: All the ports are exposed. Don't plan on using it in the rain. But for a sunny day, or indoors at the gym, it's a great holder.
Price - $1.99 + $1.50 shipping on eBay.
So buy 5, so you can replace it if it becomes stanky from sweat.

Good review. Do you think it will fit those with extended batteries with a tpu case?
Sent from my GT-I9300 using xda premium

Maybe. Its thick enough, there's plenty of vertical space.
My friends phone with incipio silicrylic case fits. Bit tight (width-wise, height has plenty of room),
May even fit with otter box.
Sent from my SPH-L710 using Tapatalk 2

Thanks. Don't mind taking a risk since the price is good
Sent from my GT-I9300 using xda premium

RavinShubh said:
Thanks. Don't mind taking a risk since the price is good
Click to expand...
Click to collapse
Ah, yeah, same here. I was pleasantly surprised, I would say it is the best armband on the market right now.
It may not work with extended battery + TPU case (depends how thick), but I'm fairly confident in saying it'll at least work with the extended battery.
There are a lot of complaints about the Belkin armbands absorbing water/sweat.
I had the iArmbands style for my last phone, they suck.
I might get one of the iGadgitz or CrazyOnDigital type for rain, but this will be my primary-use one, since I don't have to take off the case.

Looks like it's $4. shipped now.
http://www.ebay.com/itm/Grid-Armban...ccessories&hash=item3378fcaad3#ht_6128wt_1163

CZ Eddie said:
Looks like it's $4. shipped now.
http://www.ebay.com/itm/Grid-Armban...ccessories&hash=item3378fcaad3#ht_6128wt_1163
Click to expand...
Click to collapse
There's a few that are at the cheaper price.
Gray (this is the link I bought):
http://www.ebay.com/itm/Arm-Band-Ca...605370?pt=PDA_Accessories&hash=item4d031b57ba
Other colors (lime green/blue/red/pink) (searching his store):
http://stores.ebay.com/wanghaostore/_i.html?_nkw=galaxy+s3&submit=Search&_sid=878187300

Nice review !
Is it possible you could post a picture with the arm holster on, just to see how it fits ?
And how long was the shipping time ? From where to where ?

ShironLive said:
Nice review !
Is it possible you could post a picture with the arm holster on, just to see how it fits ?
And how long was the shipping time ? From where to where ?
Click to expand...
Click to collapse
Shipped from hong kong. I bought it on the 24th (weekend), shipped on the 28th, in america on the 30th, and delivered on august 3rd (midwest).
I'll try to get a picture with it on my arm.

I was thinking of actually making a custom armband, any thoughts? I've seen people do it for their iphones

Intercrew said:
I was thinking of actually making a custom armband, any thoughts? I've seen people do it for their iphones
Click to expand...
Click to collapse
I've thought of this too. I'm intrigued by the Tetrax and whether it would be stable (mostly because I've been thinking about getting one for my car).
http://www.tetrax.com/us/products/iphone-ipod/tetrax-xway
It'd be interesting to get one of the FIX connectors and epoxy it to some sort of strap, like the TuneBand.
Or you could get a cheap case and make your own TuneBand

Is this the same armband? http://www.amazon.com/JKase-Armband...&keywords=armband+galaxy+s3#productPromotions
Much rather do $10 for 2 day delivery then have to wait. But the bigger question is, do you think SGP Neo Hybrid case fit (well that is, not ridiculously tight!)? http://www.amazon.com/SPIGEN-SGP-Protection-Protector-International/dp/B008MEIQHA

xiaosongshu said:
Is this the same armband? http://www.amazon.com/JKase-Armband...&keywords=armband+galaxy+s3#productPromotions
Click to expand...
Click to collapse
Wrong button, enjoy the thanks.
NO. That is not the right one.
I actually bought that one through eBay, it sucks. The one I got, the phone doesn't fit in it (not even without the case, it kept pressing the volume button). And the strap is huge, the arm band wouldn't fit on my arm. I ended up throwing it away.
As far as the arm band goes, it should easily fit with the SGP Neo. The diztronic, despite being thin on the back, is quite thick around the sides.

Looking for a belt clip style case! Anyone?!

I have a few cases for my GS3 and only have one with a belt clip (Otterbox Defender). I'm looking for a case, maybe even a leather wallet case, that has a belt clip somehow already attached to the case itself. Anyone come across one or know of anywhere I could find one??
Please help... Thanks! :fingers-crossed:

I like the Large Nite Ize Sideways case when my GSIII is naked or wearing a slim case. The velcro closure is secure but noisy, and the clip is slim and just pliable enough to minimize the effect of having a near tablet strapped to your waist. Around here REI carries them for ~$13.

I appreciate the responses guys.. I really do.. :highfive:
...Although, what I'm really searching for would be one of a kind. You guys post links to simple leather pouches or cases that slide out from a seperate belt clip. What I really want to find is a case that combines the two (nothing seperated). I want a case that has the belt clip feature embedded into the case itself.
Is what I'm asking for make sense or even economical? Thanks again..

Try the rokbed case. there's a thread here for it.

:good: There we go! That's as close as we're gonna get to what I'm describing! Thanks bro :highfive:
And for others who are still curious of what I was looking for.. rokform.com/cart/Galaxy-S3-Cases/
Any one else still know of any other options thats just like the rokform case? Please post!

if you search amazon for "samsung s3 clip" you'll get a few results to choose from. $45 is a bit much for a case..

what's your budget?

Go to bestbuy and they have yge platinum series xase for like 35$ it a case with belt clip
Sent from my SAMSUNG-SGH-I747 using xda premium

Budget isn't really a concern as of right now.. I just want to see what's out there first then make a decision then.
Remember this post is only about a case with a clip attached to the case itself. Not one with a separate belt clip! I can find a million of those!!
Sent from my SPH-L710 using XDA Premium App

Willfx17 said:
I have a few cases for my GS3 and only have one with a belt clip (Otterbox Defender). I'm looking for a case, maybe even a leather wallet case, that has a belt clip somehow already attached to the case itself. Anyone come across one or know of anywhere I could find one??
Please help... Thanks! :fingers-crossed:
Click to expand...
Click to collapse
Try PDair.com, they've got a neat set of belt clip cases for GS3

I've been quite tempted to get one of those RokForm cases. They may be expensive, but they have a great design to them. Somehow i find the addition of the magnet to the back of the case to be quite interesting and potentially very useful. Though i doubt it would really help with NFC use.... i don't really ever use NFC, so that wouldn't really bother me. Still.... $45 IS quite a lot for a case.

read Amazon belt clip reviews
I was going to order the v3 until I read the Amazon belt clip reviews (since it's sold separately these reviews are only on the belt clip not the case itself), about 10 or 11 out of 13 are negative for various reasons. Shame because I need a belt clip case that allows the screen to face outward and very, very few cases that offer a reasonable amount of protection do that. After now spending over 20 hours online researching for one I am all ears for anybody's suggestions. I have dismissed the Otterbox Defender & Griffin Survivor because I use anti fingerprint screen protectors and their built in screen protectors really load up with fingerprint smudges. Only case I've found so far is the aluminum Monaco and it has the exact features I want but I'm trying to get some user feedback from those with aluminum cases as I've read they can effect the phone radio and GPS.
In essence, I'd like to find and order a case immediately and move on with my life..........lol

mty msi said:
I was going to order the v3 until I read the Amazon belt clip reviews (since it's sold separately these reviews are only on the belt clip not the case itself), about 10 or 11 out of 13 are negative for various reasons. Shame because I need a belt clip case that allows the screen to face outward and very, very few cases that offer a reasonable amount of protection do that. After now spending over 20 hours online researching for one I am all ears for anybody's suggestions. I have dismissed the Otterbox Defender & Griffin Survivor because I use anti fingerprint screen protectors and their built in screen protectors really load up with fingerprint smudges. Only case I've found so far is the aluminum Monaco and it has the exact features I want but I'm trying to get some user feedback from those with aluminum cases as I've read they can effect the phone radio and GPS.
In essence, I'd like to find and order a case immediately and move on with my life..........lol
Click to expand...
Click to collapse
Have you thought about going with the Griffin or Otterbox Defender and the using an "exacto" knife to remove the plastic covering they come with? I use my Otterbox all the time with the screen out, and even though I have the stock screen cover on it because I work part time at an ice rink and don't want the extra moisture exposure that would come with doing this. However, I did it to my wife's Skyrocket Defender case and she loved it when she was running because it was both outward facing and still in a super-secure clip / case.

nrhpd527 said:
Have you thought about going with the Griffin or Otterbox Defender and the using an "exacto" knife to remove the plastic covering they come with? I use my Otterbox all the time with the screen out, and even though I have the stock screen cover on it because I work part time at an ice rink and don't want the extra moisture exposure that would come with doing this. However, I did it to my wife's Skyrocket Defender case and she loved it when she was running because it was both outward facing and still in a super-secure clip / case.
Click to expand...
Click to collapse
I was going to order the Otterbox Defender last night until I viewed Otter's website and 29 of 46 reviewers stated they would not recommend it to a friend. There were many complaints about the rubber outer case coming lose after 2-3 months and various other complaints. Many stated they were longtime Otter users and were very disappointed in the overall quality. Also, on another forum a user stated you can't effectively remove the built in screen protector because there isn't a way to remove the adhesive residue. I was going to live with the fingerprint smudges until I watched a You Tube Griffin Survivor review tonight and I'm thinking you'd have the same adhesive residue issues trying to remove its screen. I honestly can not believe I'm having this much difficulty finding a screen outward facing belt clip case. My Captivate has a Body Armor case that is exactly what I want in terms of protection and features but most unfortunately Body Glove does not offer the same case for the S3.
I'm going to start a new thread asking for suggestions, thanks for your reply.

mty msi said:
I was going to order the Otterbox Defender last night until I viewed Otter's website and 29 of 46 reviewers stated they would not recommend it to a friend. There were many complaints about the rubber outer case coming lose after 2-3 months and various other complaints. Many stated they were longtime Otter users and were very disappointed in the overall quality. Also, on another forum a user stated you can't effectively remove the built in screen protector because there isn't a way to remove the adhesive residue. I was going to live with the fingerprint smudges until I watched a You Tube Griffin Survivor review tonight and I'm thinking you'd have the same adhesive residue issues trying to remove its screen. I honestly can not believe I'm having this much difficulty finding a screen outward facing belt clip case. My Captivate has a Body Armor case that is exactly what I want in terms of protection and features but most unfortunately Body Glove does not offer the same case for the S3.
I'm going to start a new thread asking for suggestions, thanks for your reply.
Click to expand...
Click to collapse
i removed the screen protector on my defender. The glue is more like cling u just pull and it comes off clean. But i would consider the ballistic sg maxx over the defender. Im gonna order it soon.

I watched a You Tube review of the Ballistic SG Maxx and most unfortunately it is a screen facing inward case only. There's a sticker stating that on the holster. That is a fine looking case and I'd buy one tonight if it were screen outward. If I can't find an outward facing one (and after all the research I've done am thinking I won't find one) I will probably buy either the Seidio Active Extended if it fits my Akron car dock and if not the Ballistic.

mty msi said:
I watched a You Tube review of the Ballistic SG Maxx and most unfortunately it is a screen facing inward case only. There's a sticker stating that on the holster. That is a fine looking case and I'd buy one tonight if it were screen outward. If I can't find an outward facing one (and after all the research I've done am thinking I won't find one) I will probably buy either the Seidio Active Extended if it fits my Akron car dock and if not the Ballistic.
Click to expand...
Click to collapse
Sorry for the late reply lol, i now have the bodyglove toughsuit and imo its better than the defender in all aspects.. the case clips face in or out on the holster
Sent from my Galaxy S3 using neighbors wifi

Willfx17 said:
I have a few cases for my GS3 and only have one with a belt clip (Otterbox Defender). I'm looking for a case, maybe even a leather wallet case, that has a belt clip somehow already attached to the case itself. Anyone come across one or know of anywhere I could find one??
Please help... Thanks! :fingers-crossed:
Click to expand...
Click to collapse
I'm a sales rep at a Verizon store, one of our customers came in with this weird gadget on the back of their phone. I asked them about it and apparently they invented it. To make a long story short I'm currently testing it out for them and one of it's features is a belt clip, or rather a pocket clip that works with some belts too. The advantage is that it can turn almost any case into a belt/pocket clip without ruining the case. I'm not supposed give out too much information about the product but it's really wicked cool and should be out sometime next "year" they say.

That's a solution I'd be interested in! Could you find out a better eta from the people you got it from and possibly post a pic of what it looks like.. Thanks!
Sent from my SPH-L710 using xda premium