Hi,
On this thread I'll put my unofficial CM9 builds. They are fully vanilla, except for the volume slider in the status bar, they are exactly the same as Hashcode builds and they include the latest CM source changes. According to this, the issues and bugs are exactly the same.
Read this thread before posting: http://forum.xda-developers.com/showthread.php?t=1615355. DO NOT report any problem in the main discussion/dev thread! You can report them here and pray .
Disclaimer :
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Changelog: http://review.cyanogenmod.com/#/q/status:merged+branch:ics,n,z
June 08 build (Source updated to IMM76L (http://review.cyanogenmod.com/#/c/17291/)): http://d-h.st/CiD
June 07 build: http://d-h.st/TMO
md5: f660a370a0a25e0961aea0551c09b911
June 06 build: http://d-h.st/B60
md5: 832b4f2a70c7cb9366cec8520c224738
Instructions:
Comming from Hashcode's CM9 or another build:
1) Reboot into Recovery (you must use TWRP 2.X or Hashcode's CWMR 5.5.0.4, otherwise flashing will fail)
2) Backup your current ROM
3) Wipe cache
4) Flash the ROM
5) Optionally flash GApps
6) Reboot
Comming from any other ROM:
1) Reboot into Recovery (you must use TWRP 2.X, otherwise flashing will fail. DO NOT try to use Hashcode's CWMR since some users report serious partitioning issues when wiping data/factory reseting as of 05-12 CWMR 5.5.0.4 build)
2) Backup your current ROM
3) Wipe data/factory reset (highly recommended but should work without if comming from a CM9 ROM. At least please DO NOT report any issue if you didn't wipe)
4) Flash the ROM
5) Optionally flash GApps
6) Reboot
Enjoy .
Thanks to:
Hashcode
pokey9000
twa_priv
JackpotClavin
icemank21
Diaruga
...
Much others.
Trojan38 said:
No volume slider for now, I'll try to add it in the next one .
Enjoy .
Click to expand...
Click to collapse
Hey Trojan38, please check your PM.
Appreciate you doing this, one of the main reasons I tend to stay with Hashcode's builds is that I like them plain vanilla. I like to customize them myself, so again, thanks for doing this.
Only thing I will mention is that d/l is really slow. LOL
Mike T
webdroidmt said:
Appreciate you doing this, one of the main reasons I tend to stay with Hashcode's builds is that I like them plain vanilla. I like to customize them myself, so again, thanks for doing this.
Only thing I will mention is that d/l is really slow. LOL
Mike T
Click to expand...
Click to collapse
Hey thank you .
Yes I'll try to chose another uploader next time .
Reserved
Sent from my Galaxy Nexus using xda premium
Trojan38, if I replace the systemUI apk with the one from Hashcode's latest build, will that give me the volume slider? Thanks.
Mike T
I don't know, try to backup the build's one and to replace with Hash's build one yep .
Trojan38 said:
I don't know, try to backup the build's one and to replace with Hash's build one yep .
Click to expand...
Click to collapse
Ok! Cool, thanks. Just finished the d/l, was able to take a nap, get up, shower and shave. J/K
Mike T
New build ready, will upload it tomorrow in the morning, including (I hope) twa_priv's volume slider .
Envoyé depuis mon GT-I9000 avec Tapatalk
I tried to download, took 45 minutes to get to 60% then the download failed.
webdroidmt said:
Trojan38, if I replace the systemUI apk with the one from Hashcode's latest build, will that give me the volume slider? Thanks.
Mike T
Click to expand...
Click to collapse
Didn't work, systemUI FCs. I'll wait for your new release. Thanks.
Mike T
Here's the new build including the volume slider, and without Bluetooth and Airplane Mode toggles (thanks to twa_priv) :
May 20 build (the name says May 21) : http://d-h.st/dQc
md5 : 8ca044b9d1289762e8d16a5318f22e0c
Thanks! Just installed the latest ROM and it works like a charm. Love the Volume Slider and the fact that those unnecessary Bluetooth and Flight Mode sliders are gone.
The only thing missing now is a fully functional sleep mode. ATM the screen does come on every few minutes which diminishes battery life.
Shahpur.Azizpour said:
ATM the screen does come on every few minutes which diminishes battery life.
Click to expand...
Click to collapse
Never seen this on any build. Could be related to an app you have installed.
You could do the following:
Install better battery stats (available on xda for free or if you want to support the dev also on the market) and check your wakelocks.
Or, you could make a nandroid backup, also backup all user apps using titanium backup, and start over. Full wipe (cache, dalvik, data and system) and flash again. The observe if this still happens.
Then restore your apps one by one and observe.
Trojan38 said:
Here's the new build including the volume slider, and without Bluetooth and Airplane Mode toggles (thanks to twa_priv) :
May 20 build (the name says May 21) : http://d-h.st/dQc
md5 : 8ca044b9d1289762e8d16a5318f22e0c
Click to expand...
Click to collapse
New build up and running well. Thanks and also thanks twa_priv. Btw, I've never had issues with the screen coming on as referenced by Shahpur.Azizpour on any of the builds.
Also, I use Green Power which overrides system settings for turning off wifi. When the screen is off, Green Power turns off the wifi and has been pretty effective at saving battery for me.
Mike T
webdroidmt said:
New build up and running well. Thanks and also thanks twa_priv. Btw, I've never had issues with the screen coming on as referenced by Shahpur.Azizpour on any of the builds.
Also, I use Green Power which overrides system settings for turning off wifi. When the screen is off, Green Power turns off the wifi and has been pretty effective at saving battery for me.
Mike T
Click to expand...
Click to collapse
I checked again and the problem was the app 'screen off and lock' after reinstall everything works fine.
But i noticed that charging was much much faster with the latest Hashcode build. Right now I'm charging with the stock kindle wall charger and it seems awfully slow....
The kernel is excatly the same, so there is no reason for .
In case anyone was wondering, I officially approve this thread.
It's been hell devving the kernel, recovery, bootloader and keeping a CM ROM up-to-date w/ the latest CM changes when I'm really just looking to test new kernel changes on a semi-currently CM build.
I will probably get the rest of the device tree good for merging w/ CM and then change my official build to something a bit different: A straight AOSP build from OmapZoom (TI) sources as a bleeding-edge build for testing new source changes on the device.
I was wondering a bit but figured Trojan38 would do the right thing by you before posting this up. Speaking of wondering, I've been wondering how you've been managing to keep all these pots cooking at the same time, with kernel, rom, bootloader and even recovery. Oh and I guess I forgot you also "tinker" a bit in the NT forum. WHEW!
You've been Super Man and I'm sure you realize that the KF community really appreciates your work. Looking forward to your future kernel development and thanks again.
Mike T
twa_priv said:
Never seen this on any build. Could be related to an app you have installed.
You could do the following:
Install better battery stats (available on xda for free or if you want to support the dev also on the market) and check your wakelocks.
Or, you could make a nandroid backup, also backup all user apps using titanium backup, and start over. Full wipe (cache, dalvik, data and system) and flash again. The observe if this still happens.
Then restore your apps one by one and observe.
Click to expand...
Click to collapse
thanks for the hints. screen off and lock was the app causing the problems!
Related
Cyanogen Forum topic
Haven't seen another topic about it here
In any case if it's not correct for me to post this, please, move/remove this post.
CyanogenMod is a free, community built distribution of Android 2.2 (Froyo) which greatly extends the capabilities of your phone.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* The CM team is not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting fired because the alarm app failed, or anything whatsoever.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github! Send pull requests with your changes!
INSTRUCTIONS:
- First time flashing CM 6.1 (or coming from another ROM)?
1. Unlock/root your device - http://forum.xda-developers.com/showthread.php?t=753910
2. Do a Nandroid backup!
3. Update your radio if necessary
4. WIPE
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
Latest version: 6.1.0-Hero - 12/07/2010
Download: http://android.d3xt3r01.tk/cyanogen/hero/update-cm-6.1.0-Hero-signed.zip
MD5Sum: c93b45ce4f9d52be2d5dba9156055f02
Google Addon: MDPI-20101020
Mirror: http://goo-inside.me/google-apps/
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Click to expand...
Click to collapse
First impression:
- Feels slower then nightly 188 with Flykernel-12 pre1, So i installed Flykernel-12 Pre1 back and noticed right away the little speed improvement over the stock kernel that comes with CM 6.1.0 stable
- When turning on GPS in house, (WiFi already on) Data connection pops up alongside the WiFi (is this normal?, never noticed it this doing with the nightly)
I just installed but now when connected via USB cable the phone is no longer being recognized by may laptop The phone as well does not come up with a notification, yet is starts charging?!
anyone...suggestions?
Perfect. I'm testing battery Life.
Waiting for themes cause i don't like the white bar
yellowt said:
Perfect. I'm testing battery Life.
Waiting for themes cause i don't like the white bar
Click to expand...
Click to collapse
settings -> cyanogen settings -> user interface -> tweaks extras -> select theme
there's a black theme there.
EDIT: sorry wrong thread!
obyn said:
settings -> cyanogen settings -> user interface -> tweaks extras -> select theme
there's a black theme there.
Click to expand...
Click to collapse
Thanks!
Finally we have a stable version of the best rom around here. New life for our heroes.
Already downloaded this at cyanogen not tried the nightly roms, but have used RC version, looks good
Will give this a shot, coming from RC1, Fly kernel 11c...tell ya if its faster
Go Cyanogen!!
What kernel does this ROM use? Is it based on... FlyKernel or some other kernel from a rom on XDA. Or is this CM's own work?
If the kernel isn't great, is it possible to replace it with something nice like FlyKernel?
FunkTrooper said:
What kernel does this ROM use? Is it based on... FlyKernel or some other kernel from a rom on XDA. Or is this CM's own work?
If the kernel isn't great, is it possible to replace it with something nice like FlyKernel?
Click to expand...
Click to collapse
correct me somebody if I'm wrong but it is highly recommended to flash flykernel right after you flash the ROM... at least I do it this way and then linpack shows nicer numbers )
CM6.1 flashes it's own kernel, and it is slower, so after the test i flashed Flykernel-12 Pre1 and this is way faster.
seems i cannot connect to WiFi using this bad boy...anyone else suffering this?
to upgrade my rc1 to this one, I just make a nandroid backup and i directly flash the 6.1.0 ? or I've to make a wipe etc...?
thanks
so is this rom working solid or is it slow?
DjoeN said:
CM6.1 flashes it's own kernel, and it is slower, so after the test i flashed Flykernel-12 Pre1 and this is way faster.
Click to expand...
Click to collapse
where have you found the flkernel 12 ?
tr05 said:
where have you found the flkernel 12 ?
Click to expand...
Click to collapse
http://floyo.desean.net/FlyKernel-12pre1.zip
Exchange
Is Exchange sync working in this? Only reason that has prevented me from using the earlier version(s)
UPDATE: Yes, Exchange sync works!
Works just fine for me
Sent from my HTC Hero
Know of any themes that can be used with this? I tried the HTC Black that was referred on the [COLLECTION] thread under Hero GSM General, but it did NOT work - I had to revert to a Nand backup to get things back to normal! However the white standard android is a bit grating on my eyes. If anyone knows of good themes that work with this please let me know! Thanks!
SGT7 is the custom ROM by the guys who brought ICS/CM9 to the OG Galaxy Tab
Initially it supported only the first tab, but now we've decided to support other tablets as well, so here it is!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
It's based on CyanogenMod 9, and will continue being to be so.
In short, it's a heavily modded CyanogenMod for tablets, fully opensource
The Team :
Click to expand...
Click to collapse
cdesai
humberos
sbradymobile
Downloads :
Click to expand...
Click to collapse
http://sgt7.tk
Mirror : http://goo.im/devs/cdesai/jenkins
zips with tf300t in it are for the transformer pad
Also available via Goo Manager
Installation and bugs are also same as CyanogenMod 9
So, download the zip, transfer it to the sd, reboot into Recovery and do a backup (always preferred, but optional), then install the zip.
Install GApps afterwards if you aren't coming from a CM9 / CM9 based ROM
Also read the CM9 thread : http://forum.xda-developers.com/showthread.php?t=1669827 (has some useful info)
Since neither of us has the device personally, the builds are untested, and we rely on you, the users, to help us.
Report anything wrong with the ROM, and what you'ld like to see in it.
Report issues here : http://code.google.com/p/sgt7/issues/list
(Do not report device-specific issues, i.e. stuff not working on CM9, report only stuff that you saw as a setting and didn't work as expected)
Lastly, thanks to the CyanogenMod team, for all their work, and thanks to the guys who ported ics to this tab.
It's just meant to be an addition of tablet specific tweaks to CM, and we might look forward to merging this functionality into CM later on, but for now, have fun with this.
Screenshots :
Click to expand...
Click to collapse
https://plus.google.com/photos/116129314276967903080/albums/5746721274320679521
(taken on my Galaxy Tab, if some user flashes this ROM and uploads some screenshots, i'ld be more than happy to link em in the first post)
Source Code:
Click to expand...
Click to collapse
http://github.com/sgt7
I plan on doing weekly builds on my personal pc, or when a big feature is released / something big is fixed (device specific), i'll try to release a new build
Awesome thank you! Gonna try this out now.
*EDIT*
Okay so after playing around with the rom, I have no sound. Made sure it wasn't muted or anything.
*EDIT again*
Not sure what's going on, now I lost my sound regardless of what rom I'm on. Tried wiping data and everything. Gonna keep on checking out to see what's wrong.
oo3 said:
Awesome thank you! Gonna try this out now.
*EDIT*
Okay so after playing around with the rom, I have no sound. Made sure it wasn't muted or anything.
*EDIT again*
Not sure what's going on, now I lost my sound regardless of what rom I'm on. Tried wiping data and everything. Gonna keep on checking out to see what's wrong.
Click to expand...
Click to collapse
My bad, sorry, the vendor sync failed, re building now, will re upload shortly.
Thank you. I had to restore my original Asus nandroid backup to get my sound back. Then from there wiped and loaded the CM9 experimental version.
Just a few questions, does sound work now? Does MTP work? Thanks!
Fire Mars said:
Just a few questions, does sound work now? Does MTP work? Thanks!
Click to expand...
Click to collapse
Sound should with the build i just uploaded, although it's untested as i don't have the device myself.
MTP is still broken, but that's upto xplodwild, again no device, so nothing i can do for that.
cdesai said:
Sound should with the build i just uploaded, although it's untested as i don't have the device myself.
MTP is still broken, but that's upto xplodwild, again no device, so nothing i can do for that.
Click to expand...
Click to collapse
No worries man, i'll just use Airdroid!
thx
Thx Team for starting another great rom on our tf300!
Downloading now. Can't wait to check it out. Thank you!
cdesai said:
SGT7 is the custom ROM by the guys who brought ICS/CM9 to the OG Galaxy Tab...
I plan on doing weekly builds on my personal pc, or when a big feature is released / something big is fixed (device specific), i'll try to release a new build
Click to expand...
Click to collapse
Welcome to the tf300 Kingdom Thank you for bringing this great development to us.
I guess I should've posted this on the first page lol but anyway...
Hey Folks! I have a YouTube Channel where I post ROM overviews for the LG G2x and the HTC Sensation. I recently bought me a TF300 and loving it so far! So I'll use this Post for my videos and I hope you like them!
Sent from my LG-P999 using xda premium
Just attempted to reinstall the new version and it won't get past the boot screen. Tried to wipe and install.
oo3 said:
Just attempted to reinstall the new version and it won't get past the boot screen. Tried to wipe and install.
Click to expand...
Click to collapse
Same here. Sitting on boot screen for 10 minutes now.
Same issue, sent logcat when bootloop occured to cdesai, waiting for fix now
oo3 said:
Just attempted to reinstall the new version and it won't get past the boot screen. Tried to wipe and install.
Click to expand...
Click to collapse
Natemz said:
Same here. Sitting on boot screen for 10 minutes now.
Click to expand...
Click to collapse
Shooshka said:
Same issue, sent logcat when bootloop occured to cdesai, waiting for fix now
Click to expand...
Click to collapse
Pretty sure it's the same error as a few other tablets, seems to be an upstream bug, will try fixing, and do a clean build later today (morning here)
Sorry for the trouble.
EDIT: rebuilt and reuploaded, should boot.
cdesai said:
Pretty sure it's the same error as a few other tablets, seems to be an upstream bug, will try fixing, and do a clean build later today (morning here)
Sorry for the trouble.
EDIT: rebuilt and reuploaded, should boot.
Click to expand...
Click to collapse
Confirm, now all good, flashed over cm9 ex2. Thanks!
UPD: Question - what difference between 1) Settings-->Performance (interactive, ondemand etc) and 2) Settings --> Extended Settings --> Cpu Settings --> Cpu Mode switch.
Who's "the boss" of these two?
The CPU in extended settings is "boss" if you set it lower you will see that the CPU never reaches 1500 even if you set it in performance
Sent from my EPAD using XDA Premium HD app
Shooshka said:
Confirm, now all good, flashed over cm9 ex2. Thanks!
UPD: Question - what difference between 1) Settings-->Performance (interactive, ondemand etc) and 2) Settings --> Extended Settings --> Cpu Settings --> Cpu Mode switch.
Who's "the boss" of these two?
Click to expand...
Click to collapse
Those settings (performance, interative, ondemand, conservative) rule how fast and when does the CPU goes up a notch. If you have it on performance you CPU will be at the highest stepping set by the CPU Settings (e.g. 1500mhz). Conservative takes more time to step up the CPU so you might see some lag there. The most used one is interactive, it steps up quickly when needed (for example, when running a game).
In summary, the CPU Settings say how high and low can the pad go, and the governos say how fast can the cpu power up the device to higher CPU speeds.
jgaf said:
In summary, the CPU Settings say how high and low can the pad go, and the governos say how fast can the cpu power up the device to higher CPU speeds.
Click to expand...
Click to collapse
Yep, I understand and know it, but then I don't understand why we need options in "Extended settings" if we can use any CPU control to do that.
And ok, I got answer - CPU Control is the "boss" and has higher priority)
Great ROM! Only issue so far is that system ui crashes when flipping the combined bar in tablet tweaks, have tried every other tweak and they work like a dream though!
Sent from my GT-I9000 using XDA Premium HD app
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/D710_Info
INSTALLATION
Click to expand...
Click to collapse
First time installing CyanogenMod 11 to your Epic 4G Touch, or coming from another ROM:
- Copy GApps and CM 11 zip's to your internal SD Card
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG
- Make sure you're running a proper working ClockworkMod-Recovery
- Make sure you're not running a JB modem
- Boot into recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
Upgrading from earlier version of CyanogenMod 11:
- Copy CM 11 zip to your internal SD Card
- Boot into recovery
- Flash CM11 zip from internal SD Card
- Reboot
Upgrading from CyanogenMod 10.2:
- Copy 4.4.4 GApps and CM 11 zip's to your SD Card
- Boot into recovery
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
DOWNLOAD
Click to expand...
Click to collapse
CM 11 official nightly builds:
http://download.cyanogenmod.org/?device=d710
Google Apps:
https://goo.im/gapps/gapps-kk-20140105-signed.zip/
CHANGELOG
Click to expand...
Click to collapse
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
http://changelog.bbqdroid.org/#/d710/next
DONATIONS
Click to expand...
Click to collapse
If you want to donate a few bucks for the work:
Thanks to all donators!
Hey! thank you for your work! I just recently got an S2, and I love cyanogenmod. However, I tried installing the 2014-08-18 nightly, and I got a status(7) Installation aborted. set_metadata_recursive failed. I used to dev back in the day as well, and I know it has something to do with updater scripts. So I just wanted to give you a heads up! Thank you for your work again!
EDIT: I just tried the liquid smooth rom, and the same thing happened, it's probably just my device, I will investigate
EDIT EDIT: Did some research got it working, again, thank you for all of your great work!
torch2424 said:
Hey! thank you for your work! I just recently got an S2, and I love cyanogenmod. However, I tried installing the 2014-08-18 nightly, and I got a status(7) Installation aborted. set_metadata_recursive failed. I used to dev back in the day as well, and I know it has something to do with updater scripts. So I just wanted to give you a heads up! Thank you for your work again!
EDIT: I just tried the liquid smooth rom, and the same thing happened, it's probably just my device, I will investigate
EDIT EDIT: Did some research got it working, again, thank you for all of your great work!
Click to expand...
Click to collapse
Which recovery were you using? What ended up being the problem?
unknownsoldierx said:
Which recovery were you using? What ended up being the problem?
Click to expand...
Click to collapse
Um I was using the Agat recovery, I followed this guys guide(After following his rooting guide) https://www.youtube.com/watch?v=9W-1FPfgclM
What ended up being the problem, is that I've never had a phone where every rom and kernel install an entirely new recovery, so I didn't understand that and messed some thing up, but I solved the problem by simply installing the blasphemy kernel, rebooting into recovery for the new recovery, and then installing this rom. Which I must say, is very sleek and smooth, much props the CM team and the dev!
dastin1015 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/D710_Info
First time installing CyanogenMod 11 to your Epic 4G Touch, or coming from another ROM:
- Copy GApps and CM 11 zip's to your internal SD Card
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG
- Make sure you're running a proper working ClockworkMod-Recovery
- Make sure you're not running a JB modem
- Boot into recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
Upgrading from earlier version of CyanogenMod 11:
- Copy CM 11 zip to your internal SD Card
- Boot into recovery
- Flash CM11 zip from internal SD Card
- Reboot
Upgrading from CyanogenMod 10.2:
- Copy 4.4.4 GApps and CM 11 zip's to your SD Card
- Boot into recovery
- Flash CM 11 zip from internal SD Card
- Flash GApps zip from internal SD Card
- Reboot
CM 11 official nightly builds:
http://download.cyanogenmod.org/?device=d710
Google Apps:
https://goo.im/gapps/gapps-kk-20140105-signed.zip/
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-11.0,n,z
http://changelog.bbqdroid.org/#/d710/next
If you want to donate a few bucks for the work:
Thanks to all donators!
Click to expand...
Click to collapse
@dastin1015 You're utterly amazing! :good::good::good::good::good:
Thanks dastin. Everybody make sure you're running the latest cwm recovery. Search first.
Yo! by the way, I don't know if it's my device or kit kat, but I've tried liquid smooth and this rom, and for some reason everything displays kinda blurry, or like low res on the screen. Is it because my dpi is too high or low? or is it a setting I gotta switch. Hopefully someone can help me out here, thanks!
P.S this is my first time with a "higher-end" phone, and I'm extremely excited to be finally be using kit kat
torch2424 said:
Yo! by the way, I don't know if it's my device or kit kat, but I've tried liquid smooth and this rom, and for some reason everything displays kinda blurry, or like low res on the screen. Is it because my dpi is too high or low? or is it a setting I gotta switch. Hopefully someone can help me out here, thanks!
P.S this is my first time with a "higher-end" phone, and I'm extremely excited to be finally be using kit kat
Click to expand...
Click to collapse
Haha 'higher end' ^ ^
What is your DPI? Should be around 220. make it lower. Peeps like 182 for this phone.
Is restoring apps + data still not recommended, like with Liquid Smooth?
unknownsoldierx said:
Is restoring apps + data still not recommended, like with Liquid Smooth?
Click to expand...
Click to collapse
You can do it if you want, but if you get issues that's a start of some of your woes
Linux guy said:
Haha 'higher end' ^ ^
What is your DPI? Should be around 220. make it lower. Peeps like 182 for this phone.
Click to expand...
Click to collapse
Well its "higher end" to me haha. All my previous phones have been single core with very little ram. So experiencing dual cores on android is mind blowing to me haha.
And does CM11 has built in DPI settings? Or should I just get closed and do it?
One last question to everybody. The battery has been acting very wonky for me. It was charging really slow, and once it was fully charged I was playing with it for about an hour, and I lost not that much percent. Then I re booted it, and I only had 5% . is this normal for kitkat? Is the ROM or my phone?
LTE is still listed as Recommended when you go to Settings > Mobile Networks > Preferred Network type
Otherwise newest nightly build is alot snappier! Keep on the good work man!
torch2424 said:
One last question to everybody. The battery has been acting very wonky for me. It was charging really slow, and once it was fully charged I was playing with it for about an hour, and I lost not that much percent. Then I re booted it, and I only had 5% . is this normal for kitkat? Is the ROM or my phone?
Click to expand...
Click to collapse
That's normal. I flashed the August 19 nightly over Villuminati and my battery dropped from 70% to 20%. Just charge it back up; the battery will stabilize in a day or two.
Ah hell yeah, CM11 going official soon after grabbing my own E4GT
Not gonna flash it though - with this 4.5' screen, I'd like to use CM11 in 320DPI glory, yet Exynos 4210 just lags under that configuration (tried in Villuminati). Sticking to CM10.2, but still huge thanks for bringing this over!
Oh, BTW, in case anyone wants to see what *my* configuration looks like, do these:
1. Change "ro.sf.lcd_density" from 240 to 320 in /system/build.prop.
2. (optional) Add a line "qemu.hw.mainkeys=0" in the same file. This gives you on-screen nav buttons. If you do this, remember to turn capacitive key backlight off in Settings-Buttons.
3. Open Terminal Emulator. Commands:
su
wm size 768x1280
reboot
DONE - E4GT is now a Nexus 4, though MUCH slower
Sent from Google Nexus 4 @ CM11
Got a weird issue. My phone was rebooting randomly, and my battery spun like a top...so I replaced it. Now with this new battery its still randomly rebooting, but not as bad. If I used my phone with that bad battery long enough, could that hurt my phone?
BBQ Log Kinda Wonky
http://changelog.bbqdroid.org/#/d710/
I like using the bbq app to follow along what is going on, it seems kind of wonky. The CM 11 nightlies are not showing up as next nightly yet. Is there something someone needs to do to "reset" the page or will it just straighten itself out as more nightlies get built?
Thanks!
fleabus
THIRSTY GNOMES said:
Got a weird issue. My phone was rebooting randomly, and my battery spun like a top...so I replaced it. Now with this new battery its still randomly rebooting, but not as bad. If I used my phone with that bad battery long enough, could that hurt my phone?
Click to expand...
Click to collapse
By chance, do you use ANKR? I bought ANKR batteries and they reboot all the time but the battery doesn't spin yet.
Double-Tap To Sleep & Go To Sleep Commands
I've been running earlier versions of this ROM since early 2014 and love it. The latest "Nightly" (08-20) seems to be working fine on my E4GT. I do have two questions, both relating to making my device work a little better in absence of a working physical "Power Button".
1. Can anyone report success or failure of utilizing the Status Bar "Double-Tap To Sleep" function? I've been trying to use it after each update of this ROM and can never seem to get it working. The Status Bar "Brightness Control" sliding gesture works fine, but not the "Double-Tap To Sleep" gesture. I was concerned that my use of Nova Launcher might be the cause, so I tested the function using both the Trebuchet and Google Now Launchers, but experienced the same problem. I'd appreciate any feedback or guidance on this issue.
2. One of the nice CM11 features is the "Go To Sleep" tile that can be found in the "Notification Drawer" Tiles, as well as being added to the Notication Screen Ribbon. What I'm looking for is the name and/or location of the file/command that initiates this "Go To Sleep" function. I'm looking for this as I'd like to assign Home Screen Shortcut and/or Nova Launcher Gesture to activate the "Go To Sleep" command, without having to pull down the Notification Screen. Nova Launcher allows you to assign "Activities" to virtually any command that can be found in your system file structure. However, I can not find the "Go To Sleep" command. If someone can point me to where that file/command is located and/or advise me of the file's name with the system, I'd really appreciate it.
As a side note... I know (and have) many apps and widgets that can switch off the display with a screen touch. However, all of them that I've tried not only turn off the screen, but also immediately lock it, as well (which I do not want to do in this case). The CM11 "Go To Sleep" command is the only one I've found that will turn of the display, but NOT lock my system.
Thanks in advance for any help and guidance you can provide!
I've noticed a couple tantalizing mentions of "soft reboot" recently, as integrated into the power reboot menu. The first link mentions the S4 specifically, but the second doesn't. It's not in our current build, so does that mean it's really only for that one family? Or maybe it just takes more time to make its way around?
http://review.cyanogenmod.org/#/c/70790
http://review.cyanogenmod.org/#/c/70811
@drk65, I could have sworn that the double-tap to sleep worked in the build a few weeks ago, but you're right that it doesn't work in the current one, so now I'm not sure if I imagined it or just forgot the trick to it.
hang after first reboot.
I wipe and install from a CWM recovery and everything is fine until I decide to reboot my device. Then I hang at Galaxy S2 screen.
My last rom was CM 10.1
Anyone have an idea what might be happening?