Develop Bugs

[App] Prepay Widget - working?

Hi guys - is it working OK? There was an update that should now make it fully compatible witg the GSM S3.
.........................................................................................................................................................................
Hello everyone! I am the developer of Prepay Widget, a small app that allows you to monitor your account balance through USSD requests.
You can find more info about USSD on Wikipedia, but basically these are short, SMS-like messages used by most GSM and some CDMA providers to deliver information
or control account services. The actual information comes to you in the form of popup toasts, which thids app hides and parses into widgets.
You can find the apps landing page on XDA at the following thread:
http://forum.xda-developers.com/showthread.php?p=12348102
However, i want to stress that its important that we get some device-specific feedback, so please post in this thread if you have issues,
this helps me keep track of bugs and requests better.
You can use the Lite version of the app - it has all the functionality of the full version apart from automatic updates (not really that important imo).
As I haven't got one of these phones in my pocket, I need some testers to track down problems. Please, use this thread to comment or
suggest features. It is my belief that addressing issues is best done individually by phone, so if something doesn't work, let me know and I will fix it ASAP.
Market link:
https://market.android.com/details?id=fahrbot.apps.ussd.widget.lite
Debugging:
Please use the "Write to developer" item in the Settings menu to send logs. Enable debugging, reproduce your error and then send the logs.
Make sure you include a description - the more detailed the description the better.
Screens:

Been usign it for quite some time now, full version. First on Razr XT910 and now on SGS3 with root.
No problems here. Widget set up to open the ap or to update balance works just fine.
Running BLG8

Thanks. Are you on a stock firmware?

ftgg99 said:
Thanks. Are you on a stock firmware?
Click to expand...
Click to collapse
Yes. Both the Razr and SGS3 stock, just rooted.

Szadzik said:
Yes. Both the Razr and SGS3 stock, just rooted.
Click to expand...
Click to collapse
Thanks, its appreciated.

Anything to report?

I downloaded your app and ran it, it updated fine whilst setting it up but now it never updates(just stuck on the circle) and my USSD codes don't work anymore when I type them in the dialer. It gives me the "connection problem or invalid MMI code" responce. Uninstalling did not help and I still get these issues dialing in the USSD code.
I was using 1.3.3.3 on Paranoid Andoid 1.992 and Siyah Kernel 1.52.

Are you in root mode?

ftgg99 said:
Are you in root mode?
Click to expand...
Click to collapse
Yes, Using SuperSU; It's says permissions have been granted.

Its probably supersu. Try this - uninstall, reboot, install. Make sure youve set ss to always grant permissions.
One a sidenote i dont recommend supersu.

ftgg99 said:
Its probably supersu. Try this - uninstall, reboot, install. Make sure youve set ss to always grant permissions.
One a sidenote i dont recommend supersu.
Click to expand...
Click to collapse
It did not work, oh well, I guess I might switch over to another SU app later. Once I do, I'll let you know if it works or not.

Im afraid i cant recommend supersu. It really sucks atm, everyone has denounced it.

Hi,
i've been using prepay widget on ICS (galaxy s 3) for long w/o any probs.
now upgraded to JB XXDLI8 and it just stuck with adding ussd code (circling without any progress)
i did a uninstall and reinstall and it did not help (baseband DLI8, supersu installed)
what can i do?
P.S. when disabled root mode it worked fine. But how can get it work with root?

We dont support leaked firmware of any kind, ever. When a final official build is released, i will look into the issue.

hi
updated to official release XXDLIB, problem still remains
when granted root it just stucks on adding ussd code, without root it works but updating screen is annoying.
should i send you error log? would you mind?

Yes, with a description.

Ok, sent it by write to developer after enabling error log.
Hope you can find the source of problem
Regards
Sent from my GT-I9300 using Tapatalk 2

An update that will deliver full TW JB compatibility is on its way. ETA is today or tomorrow.

As promised:
1.3.3.4
Fixed compatibility with SGS III Jelly Bean release

Thanks mate
Using lite version now and it runs no problem yet
Otherwise will report you
Sent from my GT-I9300

[Signed] S-Voice to S2 ODEXED

Hey Ppl
Ported S-voice App from S2 Plus (newest S-Voice version)
Fully work on S2 Stock Odexed
Instruction:
First Download the s-voice-s2+-signed.zip
Extract and install FIRST S-Voice-setup.zip (CWM)
After installing, you will not see the icons yet.
Now you install the s-voice_android_phone.apk
And voila, now you have S-Voice on your S2.
Known bugs:
Wakeup Commands does not work [FC](I think this is a S2 problem and not S-voice bugs)
"An unexpected server error occurred" on logical question, is a error from Samsung server.
Link: http://www3.zippyshare.com/v/56096836/file.html (107mb)

hello
i love the wallpaper on the screenshot. could i get it?

FC samsung TTS for me

mikemaxe said:
FC samsung TTS for me
Click to expand...
Click to collapse
Do you use Stock Rom or Custom Rom?

thomas1003 said:
i love the wallpaper on the screenshot. could i get it?
Click to expand...
Click to collapse
This is a S4 Wallpapers. Look in "Galaxy S II Themes and Apps"

i use stock rom JB 4.1.2

mikemaxe said:
i use stock rom JB 4.1.2
Click to expand...
Click to collapse
Hmmm weird. Does it work for someone??

Can u make it for Deodexed Stock 4.1.2 ??

installed and works but the functions are very limited.
You can only ask to do simple stuff like setting an alarm, messaging and etc.
When asked logical questions (i.e who is the president of US, or how old is someone, etc , etc) it just says there's a server error.
Well thank god we have google now

then I restore my phone and then I just install your APK and everything is ok, of course I uninstall voice commands with titanium backup before

[email protected] said:
installed and works but the functions are very limited.
You can only ask to do simple stuff like setting an alarm, messaging and etc.
When asked logical questions (i.e who is the president of US, or how old is someone, etc , etc) it just says there's a server error.
Well thank god we have google now
Click to expand...
Click to collapse
Have u tried Google now,, it's much better than S voice (Speed, & quality)

[email protected] said:
installed and works but the functions are very limited.
You can only ask to do simple stuff like setting an alarm, messaging and etc.
When asked logical questions (i.e who is the president of US, or how old is someone, etc , etc) it just says there's a server error.
Well thank god we have google now
Click to expand...
Click to collapse
You have right, but i think this is a S2 problem, and not S-Voice bug.

thanks

Newest S Voice version means S4 version?
BTW good job, dong

DJ_Jedi said:
Newest S Voice version means S4 version?
BTW good job, dong
Click to expand...
Click to collapse
No, the newest version for they others phones (S3, S3 mini, S2 plus Etc)
This version is 10.1.18223

[email protected] said:
installed and works but the functions are very limited.
You can only ask to do simple stuff like setting an alarm, messaging and etc.
When asked logical questions (i.e who is the president of US, or how old is someone, etc , etc) it just says there's a server error.
Well thank god we have google now
Click to expand...
Click to collapse
I found the problem. My sister has the S3 mini with S-Voice as stock, and says the same "An unexpected server error occurred", so i think this is a server problem from samsung´s server.

Thanks for the porting.. but i have a problem... everytimes i reboot my phone i have to re-install apk otherwise it doesn't work (it says "Server error, retry", while after i re install the apk it works perfectly).. Could fix this problem? thanks again..

Works with deodexed roms?
Edit: tested and works
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel

psycho123 said:
Thanks for the porting.. but i have a problem... everytimes i reboot my phone i have to re-install apk otherwise it doesn't work (it says "Server error, retry", while after i re install the apk it works perfectly).. Could fix this problem? thanks again..
Click to expand...
Click to collapse
I solved myself here the procedure for who has my issue:
1. install via CWM the zip file
2. delete with a root file manager the original SVoice.apk on system/app (mount R/W before)
3. copy the apk in system/app and apply the authorization rw--r--r
4. done

​
i think the issue is a free space in system folder
s voice setup is 80 mb

[Q] Small problem with djolivier ROM and can't post...

Hi all,
Can't post in the developer thread and the ROM creator has disabled PM's so has anyone else fixed this....?
I'm using Mervellous CM10 ROM by djolivier and firstly, no matter what settings I tweak my buttons will not backlight!
Secondly, the app OTA Update Centre will not download updates for the rom (yes it is supported). The download seems to start and then where the files being downloaded should be listed, NaN flashes up and then I get an error saying there is an error with this download, or something to that effect.
I'm using the build of the rom from April 20th and I've tried updating the app and uninstalling it which it doesn't seem to like as the app is built into the rom.
If anyone can help or even repost this in the rom thread on my behalf I'd appreciate it a lot!
Thanks!

Update
Allie1985 said:
Hi all,
Can't post in the developer thread and the ROM creator has disabled PM's so has anyone else fixed this....?
I'm using Mervellous CM10 ROM by djolivier and firstly, no matter what settings I tweak my buttons will not backlight!
Secondly, the app OTA Update Centre will not download updates for the rom (yes it is supported). The download seems to start and then where the files being downloaded should be listed, NaN flashes up and then I get an error saying there is an error with this download, or something to that effect.
I'm using the build of the rom from April 20th and I've tried updating the app and uninstalling it which it doesn't seem to like as the app is built into the rom.
If anyone can help or even repost this in the rom thread on my behalf I'd appreciate it a lot!
Thanks!
Click to expand...
Click to collapse
OK just read through the thread for the rom a little more and found that the update thing is known about and is expected so the only real unresolved issue that I have here is the backlight for the buttons if anyone has any ideas

It's a widespread bug, not even sure it can be called a bug.
Use "keyboard brightness control" or "adjbrightness".

omnomnomkimiiee said:
It's a widespread bug, not even sure it can be called a bug.
Use "keyboard brightness control" or "adjbrightness".
Click to expand...
Click to collapse
That's great I'll give them a go thanks! Otherwise hopefully the bug will get fixed

Allie1985 said:
That's great I'll give them a go thanks! Otherwise hopefully the bug will get fixed
Click to expand...
Click to collapse
Even I had the same problem. I tried doing the settings given by djoliver, but they didn't work. Then I realized that you have to turn on 'Automatic Brightness' under 'Brightness' and then the buttons worked perfectly.
S.

omnomnomkimiiee said:
It's a widespread bug, not even sure it can be called a bug.
Use "keyboard brightness control" or "adjbrightness".
Click to expand...
Click to collapse
+1 Why can't I pronounce your name? omomnonmnigkinmhomnineee

thehacka1 said:
+1 Why can't I pronounce your name? omomnonmnigkinmhomnineee
Click to expand...
Click to collapse
Mwahahaha !
Sent from my magical penguin

Problem loading Marvellous CM10
Hope someone can help me. After much experimentation with different configuration settings for installing the Marvellous CM10 ROM, I still cannot successfully install with INT2EXT+, and INT2EXT is way too laggy to be functional. I keep getting error code "7" after tying to install with INT2EXT+.
Before flashing the ROM, I always flash Superwipe first. Is there anything else that I might need to do to beforehand to ensure a successful installation? If not, can anyone suggest a setup configuration that successfully installs the ROM using INT2EXT+?
Thanks.

[MOD][XPOSED] NFC Icon Remover [HTC One/One X]

NFC Icon Remover
**You can now get NFC Icon Remover on the Xposed Framework's Download tab. In this way, if I update it, you will get update notice via Xposed framework. However, I will still post the most updated file here once available! **
I just wrote this little App for my own use to remove the ugly (IMHO) NFC icon. With the power of XPosed framework, there are no need to modify the NFC.apk and the Icon is complete GONE.
For those you may not know, the NFC icon appears on HTC One and One X (after Android 2.2 update). This take out the precious space of status bar while looking really ugly.
Please be noted to use this mod, you need XPosed framework by rovo89. You could get the Framework at http://forum.xda-developers.com/showthread.php?t=1574401
This App has no icon of it's own. Just side load attached NFCIconRemover.apk and enable it in the Xposed Installer then reboot. You will notice the NFC icon will be gone after reboot.
Since this is my first Android app (Actually my last time writing any SW is 20 years ago! Haha!) so feel free to risk your phone by installing this. I am NOT responsible if it anything went wrong after install this mod.
I had only test this on my HTC One X (international version) with MaximusHD 21.1.0 (a very good custom ROM). Please feel free to feedback on this thread and I will try to resolve as much as I could.
If you find this useful, it would be appreciated to push the "Thank" button!
Great thanks go to rovo89 for this fabulous framework!!!

When I try to install from within xposed framework, I get the following error message:
Package name is incorrect (downloaded: com.lssong.nfciconremover, expected: NFCIconRemover)
Any idea?
edit: Just noticed that manual installation of the .apk works. So more or less a non-issue, but maybe worth solving anyway.

BigBlue007 said:
When I try to install from within xposed framework, I get the following error message:
Package name is incorrect (downloaded: com.lssong.nfciconremover, expected: NFCIconRemover)
Any idea?
edit: Just noticed that manual installation of the .apk works. So more or less a non-issue, but maybe worth solving anyway.
Click to expand...
Click to collapse
Yeah, I get the same thing happening.

As said above, manual installation of the .apk worked fine. The module is now listed in xposed framework, and I could enable it. Unfortunately it's not removing the NFC icon on my device (LG G2).

Deleted due to double post

BigBlue007 said:
As said above, manual installation of the .apk worked fine. The module is now listed in xposed framework, and I could enable it. Unfortunately it's not removing the NFC icon on my device (LG G2).
Click to expand...
Click to collapse
Thanks for trying out! I just fixed the download installation issue in the Xposed framework. It should work now... *My Bad*...
As for LG G2 not working... Since I don't have a LG, could you please help by checking if the LG G2's NFC service package name is com.android.nfc? If not, what is the name?
Thanks!

Hi. How can i have the nfc back again? Thanks

Installed, works great, thanks!

rharta said:
Hi. How can i have the nfc back again? Thanks
Click to expand...
Click to collapse
If you want the NFC icon back, just disable this module in XPosed frameworks and reboot. The NFC icon will be back. (uninstalling the module then reboot will do the same trick)

SephirothXIIIX said:
Do you know if this is supposed to work with the 4.3 update? I've installed the Xposed Framework and enabled the module and rebooted, but I still have the annoying icon.
Click to expand...
Click to collapse
Since my One X doesn't have 4.3 yet, so I cannot test myself. However, as long as Xposed framework works and the NFC process is named "com.android.nfc" then it *should* work.
Feel free to install it and post your result here! It won't hurt anything and if it doesn't work, just remove it.
If it doesn't work, could you please let me know your NFC's process name so I could add it.
Thanks!

Sony Xperia Z
Process name is
com.sonymobile.nfc
Or at least it is on my rooted stock T-Mobile version. Model #C6606. Running 4.1.2 (I know, ridiculous).
Thanks for the mod. I hate that icon!

lssong99 said:
Thanks for trying out! I just fixed the download installation issue in the Xposed framework. It should work now... *My Bad*...
As for LG G2 not working... Since I don't have a LG, could you please help by checking if the LG G2's NFC service package name is com.android.nfc? If not, what is the name?
Thanks!
Click to expand...
Click to collapse
LgNfc.apk

Ok, I will add both when I can get back to my PC with the source code next week!
Sent from my HTC One X using XDA Premium HD app

Palthron said:
LgNfc.apk
Click to expand...
Click to collapse
Sorry, LgNFC.apk is the name of the apk file... Can you try to get the "process name" which looks like com.android.nfc? (I guess LG's might look like com.lge.nfcaddon ...)
If you don't know how to get a process name, try to get Android Tuner free. In that app you can see all the process name!
From the information on XDA, it seems LG had their own implementation of NFC and lot of things are changed under-hook. I had look up into the BaskSamli people provide and pull the com.lge.nfcaddon. Not sure if it's correct and even if it's correct, will it work or not.
Anyway, you can try the attached apk and check yourself! If it works, I will post it on the XPosed framework's download page
Cheers!

probablymartin said:
Process name is
com.sonymobile.nfc
Or at least it is on my rooted stock T-Mobile version. Model #C6606. Running 4.1.2 (I know, ridiculous).
Thanks for the mod. I hate that icon!
Click to expand...
Click to collapse
I have added to hook also Sony's nfc but but sure if it will work or not. Could you please side load this apk and test for me? If it works, I will post it on the XPosed Framework's download page!
Thanks!

maybe try again?
That did not work on my Xperia. But I may have flubbed the service name. Perhaps try:
com.sonymobile.nfc.NfcServiceEx
Thanks!

probablymartin said:
That did not work on my Xperia. But I may have flubbed the service name. Perhaps try:
com.sonymobile.nfc.NfcServiceEx
Thanks!
Click to expand...
Click to collapse
OK. Modified accordingly. However, it seems Sony also modified their NFC service so no guarantee my simple way will work... Anyway please let me know if it works!

sigh
lssong99 said:
OK. Modified accordingly. However, it seems Sony also modified their NFC service so no guarantee my simple way will work... Anyway please let me know if it works!
Click to expand...
Click to collapse
Nope. No luck. I guess Sony doesn't want me to control me own phone experience. But there's nothing to unique about that, I guess. Thanks for your effort and prompt responses!

lssong99 said:
Sorry, LgNFC.apk is the name of the apk file... Can you try to get the "process name" which looks like com.android.nfc? (I guess LG's might look like com.lge.nfcaddon ...)
If you don't know how to get a process name, try to get Android Tuner free. In that app you can see all the process name!
From the information on XDA, it seems LG had their own implementation of NFC and lot of things are changed under-hook. I had look up into the BaskSamli people provide and pull the com.lge.nfcaddon. Not sure if it's correct and even if it's correct, will it work or not.
Anyway, you can try the attached apk and check yourself! If it works, I will post it on the XPosed framework's download page
Cheers!
Click to expand...
Click to collapse
lssong99 thank you, I tired this but unfortunately it didn't work on LG G2 801. There was a zip somewhere to flash in recovery, but I'd love to have an xposed module that took care of it.
I appreciate your hard work!

nathanskidmore said:
lssong99 thank you, I tired this but unfortunately it didn't work on LG G2 801. There was a zip somewhere to flash in recovery, but I'd love to have an xposed module that took care of it.
I appreciate your hard work!
Click to expand...
Click to collapse
Hi, apk did not work for me either. Would love to have the icon removed. Can I help in fixing it for G2? Please let me know how. Appreciate the hard work!

[ROM] [7.1.2] [UNOFFICIAL] LineageOS-14.1 For Moto E3 Power

Mod edit: Content removed.

Mod edit: Content removed.

Great Effort Bro...Big ThumbsUp...Keep working to make it more stable

VoLTE is important for jio users

apurav.812 said:
VoLTE is important for jio users
Click to expand...
Click to collapse
Try to make a patch file :angel:

Thx soooooooo much bro...
I am waiting 10 months for this

Please help me
I got very serious problem
Is that my internal storage showing only 773MB and all other shows as system used
For me only usable is 773mb
Any solution please????

onkar.35 said:
I got very serious problem
Is that my internal storage showing only 773MB and all other shows as system used
For me only usable is 773mb
Any solution please
Click to expand...
Click to collapse
Bro....
Before u flash Twrp
Type fastboot format userdata....

spykarzzz said:
Bro....
Before u flash Twrp
Type fastboot format userdata....
Click to expand...
Click to collapse
I formatted from the twrp
Now it is showing..
Thx for the help

Mod edit: Content removed.

Keep it up man..... Good one

Some observations made in this version of ROM!
@SamarV121 Thanks for the ROM
Apart from the know issues mentioned I have a few other points:
Google Play Music pauses for 2-5 seconds whenever the home button is clicked and the app is running in the background(Only when using Google home launcher as the default launcher)
Location is inconsistent - Sometimes it gives wrong location even if "High accuracy" is enabled.
Clock app doesnt open and it crashs! Therefore not able to set alarms!
Please suggest me some solution if there are any.
Thanks in advance.

redneck37 said:
Try to make a patch file :angel:
Click to expand...
Click to collapse
How to make a patch file?

help with the apn settings bug bug
i know somebody said how to fix it before me but I don't know what he means
can somebody elxplain how to fix it please
I have encountered a bug where I cant add an apn in sim card settings
I get the message "access point name settings are not available for this user"
I'm also getting no service
also great work op
the rom itself works great

Please fix VOLTE ISSUE. thanks developers for working on moto e3 power.
Sent from my XT1706 using Tapatalk

ranjithgn said:
@SamarV121 Thanks for the ROM
Apart from the know issues mentioned I have a few other points:
Google Play Music pauses for 2-5 seconds whenever the home button is clicked and the app is running in the background(Only when using Google home launcher as the default launcher)
Location is inconsistent - Sometimes it gives wrong location even if "High accuracy" is enabled.
Clock app doesnt open and it crashs! Therefore not able to set alarms!
Please suggest me some solution if there are any.
Thanks in advance.
Click to expand...
Click to collapse
Bro mine was working fine and I tried to set alarm and its working well

the control buttons overlap the app features in several appps, for eg snapchat
please look into it
otherwise fantastic work

onkar.35 said:
Bro mine was working fine and I tried to set alarm and its working well
Click to expand...
Click to collapse
Oh then it looks like I flashed the wrong gapps package!

About Cameras’s Quality
But camera’s quality is good or there’s any issue? I want the best quality available. Someone has a photo taken with this ROM? And if it is possible someone can post a preview of this ROM? Thanks a lot.

Can you do port for Blu R1 HD? Is the same mtk6735 and 32bits