Nano screen protector - Galaxy S III Accessories

Hello guys,
So i went out to check what options I had for a good screen protector for my phone. The store guy insisted I use a new stuff that is way better than conventional screen guards and its call Proshield Nano Screen pretector.
http://proshieldindia.com/
He did exactly what was mentioned on the website. I can tell for sure the finishing on the screen now feels like its teflon coated.
Would be great to know ya'll views.

Sorry but I would NOT trust this. Seems like just applying liquid wax to the screen, like turtle wax ice. It would make the screen feel like its teflon coated but I would seriously doubt the scratch protection. Also I'm sure that would wear off, like wax.. or even like RainX

very interesting

Related

Electrostatic vs. Adhesive Screen Protectors

Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
I have no idea what is PET, or the different types. However, if you are talking about the one I got:
http://www.handhelditems.com/crystal-clear-screen-protector-p-135710.html
my experience is that this has great clarity, can get bubbles during applications, and they rarely come off by itself. On the many devices I've used this type of protector on, only one came off. It started in one corner, and over the course of a month with gradual lint build up the screen protector eventually got ruined. I could've washed it and reapplied for that month, but I had a spare so I was lazy. You can reapply the protectors as needed to get the application right. The bubbles that occur aren't the same as the rubbery kind. Air bubbles can easily be pushed out after application. The problem is dust that prevent the protector from adhering to screen, causing a little bubble. If the dust is really small, the bubble goes away over a day. Or, like me, you can live with it. You try getting something the size of an iPad dust free.
Bought Electrostatic - LOVE THESE!
Ok, as a preface I have owned and used screen protectors before.
I had an iPhone before the EVO and used the Griffin Ultraclear hard Protetctors ad the PowerSupportUSA products of every variety on my previous iPod products (iPod Mini 1G, 4G, Nano 1G, 5G, Shuffle 1G, Touch, iPhone) not to mention an invisible shield one or two. I gave up on the films towards the end of my Touch ownership. They always felt horrible and I could never get one absolutely perfect (didn't help that they usually were not perfectly cut).
For the Evo, I tried the InvisibleShield the first day because I remembered just how well the InvisibileShield had held up on my 5G. Well I think that they have changed the formula, or rather that 3M has since then because the smooth feel and smooth look of the original are most definitely gone. The new variety is rubbery (even after days of use) and is not cut well enough to be a perfect fit (it never covered edge to edge). So i skipped it. Well it seems that with this large of a glass screen, you are much more liable to getting scratches (versus using and unprotetcted iPhone/Touch screen) and I got a few ultra hairline ones that are barely if ever visible to the naked eye and just knowing that they are there bothered me. So I needed to think of getting a screen protector.
Seeing as how air moves and its nearly impossible to get a screen protectors on without any bit of dust, I decided on getting the electrostatic variety so that I could rinse if it came off or needed to be reapplied.
I bought These: Electrostatic Screen Protector - Clear Hard
- Hard variety (PET)
- Very Clear
- Silicone Layer (helps the scratches and dents heal themselves and give sturdiness to the PET)
- Electrostatic layer (holds the screen protector onto the phone)
Six pack delivered for $4? I could do much worse.
Well as it turns out, they are PERFECTLY cut and cover every inch of screen and no more. It went on smooth as butter and I got no bubbles or dust or fingerprints or anything (used a credit card to smooth it down). These were by far the easiest I have had. Not only that, but the electrostatic holds on just as strong as the sticky variety and will not get the gunk on the sides sticking to it! I have taken my TPU case on and off a bunch and had no lift whatsoever. As a bonus, THEY SHOW FINGERPRINTS MUCH LESS THAN THE GLASS SCREEN DOES!
So at $0.65 each, they are killer and having a few backups is nice as well as giving one to a friend.
Cheers!
Thanks for that post. I'm expecting my EVOs (I ordered 2) in within the next week. I've been trying hard to find cases and screen protectors without much luck, but I'm going to go ahead and order those screen protectors you mentioned since you recommend them.
Yep i ordered the same ones and love them. i have loved these from the start. they are quite easy to put on and stay on well.
Scotch tape is your friend in getting screen protectors on without a bit of dust
Childofthehorn said:
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
Click to expand...
Click to collapse
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
OneStepAhead said:
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
Click to expand...
Click to collapse
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
xlrdxrevengex said:
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
Click to expand...
Click to collapse
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
remedy22 said:
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
Click to expand...
Click to collapse
thanks for the link. Can anyone find this brand cheaper
xlrdxrevengex said:
thanks for the link. Can anyone find this brand cheaper
Click to expand...
Click to collapse
I don't think so.
But these are $13 well spent. Believe me.
~fb

Best Screen Protectors for MT4G

So what do people recommend as the best screen protectors to choose from for the MT4G?
I know everyone has their own opinions on them, but I'm hoping people can post their pros/cons and we can help us all narrow down the choice to a few.
Thanks!
the phantom skinz screen protector! pros: clear, nice feel, covers the whole front. cons: none if installed correctly.
I like the Reallook one. Clear, durable and feels like the glass.
I had the realook and phantom skinz. I settled on phantom skinz. I have the full body matte, plus clear phantom skinz. (Don't install the matte screen protector from PS).
Realook is very good with clear BUT the only thing that sucks is that you get ALOT of oils/fingerprints, etc on it. Easy install and easy clean with soap/water.
Phantom skinz gets oil on the screen too, but not as much. Screen surface is alittle "gummy". (Orange peel is very little to non existant). Watch out as the adhesive backing will attract lint (during installation) and you WILL not be able to get that off. PS also has lifetime warranty = unlimited screen protector replacements. (got the whole kit for $12 during 50% off cyber monday).
Don't bother getting invisible shield, they suck and give you orange peel, and it's thick.
@Jaylito,
Did you notice any kind of cloudiness after you cleaned your screen with alchol/towel? (assuming you've cleaned your screen with alcohol/water) For some reason, mine clouded up on the top.
yeah I have. I guess it's normal tho. goes away if u keep rubbing the screen back & fourth with ur thumb. guess since the material... if it gets wet, it'll cloud a bit cause the moisture seeps thru the inside but it'll dry out bro.
guess I have to do more rubbing then cause it's still cloudy...
oh well....
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Zagg Invisishield. Lifetime Warranty.
realook, hands down.
pros: crystal clear, feels like the glass itself, easy to clean, easy to apply, easy to reapply.
cons: a little expensive ($10 for 2, but its totally worth it)
MT4G_Slave said:
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Click to expand...
Click to collapse
Weird... for me, PS was MUCH EASIER than realook.
PS allows movement up/down/left/right with ease, and then you just squeeze out water.
For realook, it sucked to align the edges cause you can't move the film once you've "stickered" it on. Then you have to peel it back off and realign, causing lint (in my case) to adhere, and then I have to clean it again.
For me the realook was the best by far. I tried a couple of the wet app kind like invisishield and clear freak on the 4 mt4gs that I had and the realook was the best. I agree its a pain to put on, especially if you have animals because of dust and hair, but if you apply it in the bathroom after letting it steam up from the shower, I've found I can get it on without too much dust or hair falling on the screen. Also, get some extra scotch tape and place it on the front of the realook screen to keep your fingers off the adhesive side while applying it. Another nice thing is that each protector comes with two dots to apply to the camera lens in the back.
The only bad thing is that I think the realook attracts fingerprint grease worse than the wet app kind.
I have a zagg on my nexus s mostly because its all that's out right now and will put a realook on as soon as they are available.
Sent from my Nexus S using XDA App
The Boxwave screen protectores look pretty good too, though I've never tried one myself.
Ghost Armor. Just added it today on my 4G n its cut to fit perfectly, including the sensors n camera. FEELS like the real glass n doesn't take away from the display like the ones Tmo sales. Avoid those *****es like the plague.
I used Zagg for my Nexus S.
I get generic ones from a guy named lcd-protectors on ebay, 5 for $3.50. They're the stiff kind with two protective layers that you peel off, one before you apply and one after. I'm too cheap to pay more.
i just ordered a full body cover kit from stealthguards.com
choosing the clear type and none of the colored ones, it was $2.85 (full body protection, just pay shipping)
$2.85 sure beats dishing out $25 for zagg which is the same crap.
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
I love these screen protectors that I bought on Amazon. Perfect on the first try with no bubbles! Check it out here: http://www.amazon.com/gp/aw/d/B004E49TEG/ref=mp_s_a_1?qid=1294786757&sr=8-1:
BoxWare screen protector is well IDK how to rate it as it is just regular. What I did not like about it was it does "NOT" fully cover the screen as you have little gap very small which bugs me as I am neat. The feeling right now is artificial as I can tell it is there maybe cuz its still new as I applied it just 2hours ago. So lets wait and see how it turns out in long run.
I grabbed a Reallook screen protector off of amazon:
Pros: The feel and clarity are great
Cons: The cut. It has a cutout for the FFC and leaves a fair bit of space on all sides (as a result it's easy to get on) but it's really short on all sides in my opinion.
Part Four said:
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
Click to expand...
Click to collapse
Tell that to the scratch in my screen that I got the first day of having the phone... yeah, needless to say, I have a screen protector now and its helped a lot.
Sent from my HTC Glacier using XDA App

[Q] Are screen protectors really necessary?

When I first got my DROID2, the nice Verizon lady tried to sell me some screen protectors. It was like $10 for 5 or something like that, and the Verizon people put it on without any bubbles or anything. The only complaint I have is that the screen picture quality has gone down.
My question is, how durable is the screen without one? Is it easily scratchable? I'd sure like to take it off, but can't stand to have a scratched screen.
How often do you drop your phone?
A better question would be how often do you replace the screen protector? If the protector is still in good shape (they scratch hella easy) then take it off, the glass is 100x more durable than the protector. I had a screen protector on my Voyager, and when I removed it I promised I would never use one again... the screen just looks and feels better without it.
I have about 2 scratches on the protector. One is about a cm long and the other is about 2 inches, but they are light scratches. I have never replaced it.
Also, isn't the Voyager screen plastic, while the D2 screen is glass? Does that make a difference?
mehappyz said:
When I first got my DROID2, the nice Verizon lady tried to sell me some screen protectors. It was like $10 for 5 or something like that, and the Verizon people put it on without any bubbles or anything. The only complaint I have is that the screen picture quality has gone down.
My question is, how durable is the screen without one? Is it easily scratchable? I'd sure like to take it off, but can't stand to have a scratched screen.
Click to expand...
Click to collapse
I've had my D2 for over a year without a screen protector. It has zero scratches. Gorilla Glass is awesome stuff.
^This. You can't scratch this screen with a knife. I have dropped it face down on pavement and had it skid, nothing. My girl uses a protector and to me it seems like it's more difficult to use the touch screen with.
I also had a clear gloss protector on my Voyager. When I was ordering the D2 online I took a knife to the Voyager screen and couldn't scratch it, so at the time it saved me 12 bucks.
so my deep scratch must be something else
I took a "generic" screen protector, and trimmed it to fit my inspire. I probably didn't need to, but I had the screen protectors already, and figured it couldn't hurt anything.. My phone is in my pocket all day, and who knows what I throw in that pocket!
I installed a generic one, it helped with scratches and specially with fingerprints
I am very rough on phones . Another layer of protection to absorb shock and scratching can hurt anything . I use a generic screen protector and change it when it starts looking bad .

Screen Protectors

any tips or tricks to putting the screen protectors on without getting bubbles or dust and lint sticking to adhesive side of protector?
If and when you place your screen protector and notice a finger print or lint, you can repair it. I use clear packing tape, cutting two strips about 1/2" wide. Place one on the top near (but not over) the area you are working with. This is used to lift the protector so you can get under it to where the problem is. Then slip the second strip under the protector, facing up or down depending if the problem it on the protector or the glass. I do it one way then the other for good measure. Once the tape is in place, lower the protector, press on the area, raise the protector, remove the piece of tape under the protector, then lower the protector to see if the blemish is gone.
Repeat where needed. Remove the piece of tape on the top by holding the protector beside the tape, and pulling the tape off the top.
This will remove fingerprints underneath the protector whether it is on the protector or the glass. It will also remove dust, fibers, etc.
It is entirely possible to place the screen protector where it is straight and without anything caught underneath, but I have used this method many times.
If you would like to see the process, search Youtube for "removing lint from under screen protectors".
I'm lazy -- I took mine to BestBuy and had them do it. It cost around $12, but they did the job right. I always seem to screw up when putting them on myself.
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
danij3l said:
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
Click to expand...
Click to collapse
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
I purchased the Skinomi from Amazon. It did not really help with fingerprints like I had planned, nor did it look very good on the screen - contrary to the Skinomi I have on my iPhone 4...
My fire got a light scratch on it in about a week. Never dropped, lived in its case, babied.
Get a screen protector.
(I am anal and hate even the smallest defect. It was indeed a small scratch only noticeable in certain light, but was a scratch.)
brett10 said:
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
Click to expand...
Click to collapse
I disagree. I have Gorilla Glass on my Samsung Epic 4g which survived the same type of 'demonstrations' showed in that video. Not wanting to impact the beauty of the screen (touted as one of its primary features when the phone came out), I left mine unprotected. However, after less than a year of use, there are still a significant number of scratches on it, and even one 'chunk' missing that is visible from all angles.
Came here to see if anyone recommended a specific brand over another. While the anti-glare screens sound nice, I have also read that it impacts viewing in a negative way - sounds like something I don't want for a device designed for reading. Therefore I figured I'd stick with a clear protector, but was looking for reviews.
I've always loved and used the SGP Steinheil Ultra Crystal.
[I'll add link later]
The anti-fingerprint ones they sell are junk. They really muck up the screen. But the ultra-crystals are great and provide another layer of protection. I haven't installed mine on my Fire yet, but I will once I get around to it.
Though Gorilla Glass is amazing stuff, it is not scratch-proof. I'll continue using screen protectors regardless of what type of glass.
Interesting. I have a 2 year old Incredible with a perfect screen and never used a screen protector. I must be the most careful person on earth.
.46caliber said:
The anti-fingerprint ones they sell are junk. They really muck up the screen.
Click to expand...
Click to collapse
Agree and disagree. While it does hinder the quality a tiny tiny bit, I personally love the feel of the matte surface while reading a book. That, combined with anti-glare, make the clear protectors utterly useless to me. If I'm reading / watching anything, I certainly don't want to have to tilt the device to get rid of glare to see the screen clearly.
I bought the Acase matte screen protectors and absolutely recommend them to anyone. 3 pack for $12.99 shipped on Amazon. (Girlfriend loves them too)
I have an XO Skin on my Nexus and love the look of it. You really can barely tell its there and it helps a ton with the finger prints. They make one for the Fire as well: http://xoskins.com/amazon-kindle-fire-screen-protector
Be aware that this is a wet applied protector. I find the best way to apply them is the steam up the bathroom really well for a few minutes, then turn the water off for a few minutes to let any dust in the room settle. Then do a really good wipe down of the screen with a non lint towel and blow it completely clean with compressed air.
When applying the protector, use a lot of the application liquid, on the protector and your fingers.
I just installed a Skinomi protector. Still waiting for it to dry and all, but as far as I can see I removed pretty much all of the bubbles. It was around 9 bucks shipped, came well packaged with clear instructions and a lifetime warranty. As long as it the picture quality isn't disturbed, I think it's going to be a winner.
I do want to try one of those matte protectors now though...
After dealing with cheap screen protectors I ordered a couple different well reviewed protectors.
I got the armorsuit militaryshield.
It installed great, but had to apply it wet (which i don't like) and let sit for 12 hours.
It turned out very nice, you really couldn't tell it was there besides very minor screen distortion. I really didn't like how it felt, a little sticky.
I had to rma that kindle and couldn't save the shield.
So I got a greatshield ezseal
If you're looking for a protector this is the one to get.
Best protector Ive ever used.
Its basically just like the moshi ivisor for ipad.
It doesn't stick to the screen, the adhesive is on the outer edges and it basically lies on the screen -so no bubbles. you can even take it off and wash it.
I tried the Acase matte screen protectors on Amazon and they looked awful. They mute the color palette and give everything a fuzzy look. Tried the Acase clear screen protectors instead and they worked out fine. Can't see the fingerprints and the screen still looks good.
yeah matte will make it a bit fuzzy/greasy looking
the ezshield is matte
Got this:
http://www.amazon.com/gp/product/B000ALDUFG/ref=oh_o00_s00_i00_details
BoxWave Amazon Kindle Fire ClearTouch Anti-Glare Screen Protector
I really like how it fits, it really make the display look better.
Don't really care about scratches, but the reflections on the KF can be pretty annoying outside.
It's not really anti-Fingerprint but it's way more easy to clean.
It's also reusable.
I thk a screen protector is ideal if your banging it around or throwing stuff of it but other than theres no reason to really.
ive only had i protector on 1 one the phones ive had, all the rest of the stuff I dont have any SP on them.
I have never had any prob with the screen getting scratched.
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
If I could find something that would let me see the screen in the sun now that would be worth it. LOL
Is it making the screen use better outside then? And what about the use inside?
Sent from my MIUI.us Sensation 4G using XDA App
I'd definitely speak against screen protectors; I purchased a highly rated myGear one with my Fire and noticed that though fingerprints didn't seem to appear as easily, they were almost impossible to wipe off completely. It also noticeably detracts from what is such a good screen.

Screen protector, yes or not?

I have the device for some time now, I clean the screen when it dirty, and when not used, it either docked in it's dock for charge, or stored in my SENA leather pouch, is there still any need for a screen protector? I do baby my devices, I have some old SE K800, that now my mom use, and except some very little scratches, on the screen (it actually made of glass with some nice layer of anti reflect :good, it looks like new, I don't put my devices in pockets of my jeans or so, as I always go around with a backpack with all my stuff, be the smartphone in separate pocket.
I read some thread around the net, from what I understood, there a couple types of screen protectors:
dry or wet installation, and glare or anti glare, some has oleophobic layer, there even a glass protector to protect the glass to protect the glas LOL.
I do like how anti glare once, look indoors, and outdoors, but as for the quality of the display quality, it not worth it, you have an HD resolution display, even though it's a PenTile type, it still on paper has HD resolution, anti glare just make it look so bad, I don't know how the more pricey ones, work with it, but if I compare it to my 24" IPS DELL computer display, it's difference of day and night (and in negative form, DELL is much better), so yes I do hate the glare, it much easier to read from matte display, but it the manufacturer thought it need to be glare, and there no option to choose matte or glare (like you have in let say, laptops), I don't know how you guys like anti glare screen protectors.
Then there the standard screen protector we all know, the problem is, they just don't feel like the sleek cool glass, it harder to swipe, and play games with them, I know it's not Gorilla glass, but I just hate to buy a device for resale value, I like all about it, and I don't have the money to replace device every then and now, also I don't run after the newest and best devices at all, when I understood I need a NEXUS, then all I buy is NEXUS, just for the NEXUS experience, and thats basicly all I care about, not that much about the specs, as I don't have so much of a choice, because it's NEXUS.
Also, I just hate dry installation screen protectors, and the one, that we have for the device, not cover all the screen, because it curved, so I maybe consider, a wet installation protector, but then again, they from what I seed, has a weird orange peel feel, and they not feel like the glass, at all, so I just don't know, do I need or don't ? I just like to feel the device, like it is, actually I use the SENA pouch, because I use the dock to charge the device, and don't want to wear the USB port, and that the best and only choice, that feel and looks nice, and protect the device very well, also the screen. as it inside made of soft velvet material, and also, I just can't use any other type of case, as I need it be easily removed from the device, when I need a charge, if I did..the case would wear and tear very fast, and get scratched, and what not.
Thoughts?
I ran a screen protector on my old Galaxy SII and it was fine. However I tried to install a screen protector on my GNEX and because of the curved glass it just wouldnt install good enough for me. So I don't have one. I have owned the phone for almost a year now and no major scratches. I don't use a case either, a few minor dings from small drops but nothing to bad. This phone is pretty tough, at least for me.
I don't want to be paranoid it'll scratch, the thing is, that again, when it not in use, the screen get scratch protection, when in the SENA case, but I want to preserve it for at least some years, or till Google stop update it. in conclusion: anti-glare is good for direct light source, but damage the image quality; wet apply is easy to install, but feels like orange peel LOL, and looks like orange peel; so my only option is normal screen protector then, but which?
There are chapo eBay like 10 for 5$ or so, are they any good? just don't feel like wasting my money for accessory, that I may not like, and another problem, it's problematic to resell, it's not a case or bluetooth speaker..
Maybe some manufacturers has some money back program, if the customer not satisfied with they product? What is the best screen protector out there that:
1. don't cover the edges of the display
2. has oleophobic layer, just like the GNEX screen has?
3. reduce some glare, but not matte type
*If there a wet install protector, that actually feel good, and not rubbery, I also welcome it.
I have used them in the past, but the screen is so much better without them. I take the minor scratches (those you only see under a certain angle/lighting) with it. I have the phone most of the time in the pocket of my jeans. I do remove any dirt/sand from my pocket one a day.
And the oleophobic layer is good for a month ore so, it wears of quickly.
I have a Spigen SGP screen protector since I bought my GNex ad i?m totally satisfied about it.
---------- Post added at 04:26 PM ---------- Previous post was at 04:21 PM ----------
Edit.
Have just started using a extreme guard wet apply protector, but some people don't like it. It's fine with me honestly, grabbed one since it was like 5 bucks for 2 including international shipping. The oleophobic coating on the gnex wears out fast, feels good at first, then it's kind of rough when it wears out a little, one of the motivating factor I got a screen protector as well.
Beamed from my Maguro
if possible, use various films..
You may find the film you like whether it is needed or not.
Generally with a screen protector you feel more confident and convenient
i offer Buff ones.so perfect...
Had an anti-glare.....didn't like it.
My cat likes to gnaw on my phone so the screen protector now has a few scratches, unlike the screen.
Best ones I've ever used were from Bodyguardz. I had to smash my phone screen in a rock to get out of a jam and it didn't even hurt the phone. They also don't change the look of the screen at all like anti glare ones will. Only thing better would likely be the tempered glass variety.
past_pluto said:
Best ones I've ever used were from Bodyguardz. I had to smash my phone screen in a rock to get out of a jam and it didn't even hurt the phone. They also don't change the look of the screen at all like anti glare ones will. Only thing better would likely be the tempered glass variety.
Click to expand...
Click to collapse
What kind of a jam would you need to smash your phone screen to get out of???
iamsteveu2 said:
What kind of a jam would you need to smash your phone screen to get out of???
Click to expand...
Click to collapse
Taking pics too close to flood waters full of rocks and was swept into them. Had my phone in hand whole time. Even soaked the phone but worked next day after it dried. And no marks on the screen at all
Yes
Sent from my Nexus 7 using XDA Premium 4 mobile app
1 year and a half with my GNexus without screen protector, no scratches yet but I think I got luck, dropped 2 times but always on the back side
I buy this one at January of this year and for sure its best screen protector i find, The pack have 3 but i only use one and dont need to replace yet.
No marks, no texture, very good deal in my opinion.
Search on Ebay for "New 3x CLEAR Screen Protector Guard Cover Film Samsung Google Galaxy Nexus i9250" the vendor name is "rockymobile"
I
Same here.. Never used a screen protector and never had a need for one.. Even with my keys in the same pocket I've never scratched my screen.
Sent from my Galaxy Nexus using xda app-developers app
my solution is using a "smaller" size protector which is not cutting according the glass size. It avoids to fit the curved face so the protector signally smaller then the screen glass. I found this type of the protector on the shop and still using it happily. It is petty match with the soft case because the soft case will covered the curved face that protector doesn't. And you don't worry the soft case will tilt the protector up.
I vote no.
Had 1 on 6 months ago since it was included/installed when I purchased, along with a rubber case.
But after testing out another GN without it, it just felt so much smoother, so took it off, but keep the case, which helps keep a grip from slips/drops
I use protector from 1 year ago and I dont have problems using touch and everything is smooth.
Sent from my Galaxy Nexus using Tapatalk

Categories

Resources