[Q] things that can brick your phone - HTC One V

can flashing a cwm recovery brick my phone?
how about TITANIUM kernel?
ps: every thing is stock on my one v

Hi
Actually those things cannot "brick" your phone.
In the worst case you can always apply the RUU to get it back to stock.
Only really "stupid" things can do this
e.g. Power Failure during RUU or pulling the USB plug during flashing
Regards
max

alifa said:
can flashing a cwm recovery brick my phone?
how about TITANIUM kernel?
ps: every thing is stock on my one v
Click to expand...
Click to collapse
it takes a special kind of person to brick with kernel and or recovery so your fine.

maxwen said:
Hi
Actually those things cannot "brick" your phone.
In the worst case you can always apply the RUU to get it back to stock.
Only really "stupid" things can do this
e.g. Power Failure during RUU or pulling the USB plug during flashing
Regards
max
Click to expand...
Click to collapse
What is RUU?
I Know it is a really silly question.

alifa said:
What is RUU?
I Know it is a really silly question.
Click to expand...
Click to collapse
RUU = Rom Update Utility
which is HTC's way of distributing updates via the pc, also you will find a list of most of the RUU's available for this rom in the development forum (it's a sticky) which will help you revert to stock.
read this thread, might answer some future Questions

I added TITANIUM kernel to my phone, how can i use its features ?

Hi
alifa said:
I added TITANIUM kernel to my phone, how can i use its features ?
Click to expand...
Click to collapse
Install a set cpu frequency app - you will find links to some in the titanium kernel thread
Set what you like - apply on boot - ready
regards
max

Ok so for someone like you who is new to kernels let me put it this way, Titanium kernel enables your phone's processor to perform faster or slower than in your stock, to customize the speed you have to use an external app.
i use this...
https://play.google.com/store/apps/details?id=com.antutu.CpuMasterFree&hl=en
P.S: Overclocking too much is harmful for your phone so do not set it too high.

Repeatedly press power button when you fail to enter fastboot mode. If you do this, you are most likely to get a blank screen and QHSUSB_DLOAD error when you plug it into pc. if you get this error,your phone is hard brick and the only solution is phone replacement. To avoid this, you can install fast reboot or similar app as soon as your phone get rooted if you want to enter fastboot mode/recovery.
Better late than never, but never late is better.
-Drake

JalmiNyondong1933 said:
Repeatedly press power button when you fail to enter fastboot mode. If you do this, you are most likely to get a blank screen and QHSUSB_DLOAD error when you plug it into pc. if you get this error,your phone is hard brick and the only solution is phone replacement. To avoid this, you can install fast reboot or similar app as soon as your phone get rooted if you want to enter fastboot mode/recovery.
Better late than never, but never late is better.
-Drake
Click to expand...
Click to collapse
i use the tool kit, i never go to boot loader Manually.
i didn't understand the last part.

Related

[Q] Help! I think I've bricked my phone.

I think I have bricked my phone. I followed the instructions listed here:
http://forum.xda-developers.com/showthread.php?t=834228
but have when i restart the phone, it is just stuck on the words HTC
doesn't load into anything else.
What should I do?
Well as your phone powers on its not a proper brick, when it powers on and gets to the first boot screen like you say there is usually like a 99% chance it can be recovered.
Edit: stupid thanks button!
How long do you leave it on the htc bit before you power down again? maybe your just not waiting long enough.
left it on for 10 minutes.
all it says is "HTC" in green...
Are you able to get into hboot? Try holding the volume down key while you turn on the phone.
One easy thing to try would be to flash an RUU, make sure you find the correct one for your phone (Z or G2) and make sure its the latest one around.
That will return your phone to stock so you can attempt to root again.
yes, yes i can get into HBOOT.
my phone is a g2. How do I flash a RUU?
yukei said:
my phone is a g2. How do I flash a RUU?
Click to expand...
Click to collapse
my mistake, wasn't aware there appears to be no way to flash a new firmware on a g2 unless its by ota.... sucks
edit: just bare with us we will have an answer for you soon.
What about recovery? There should be a recovery option in the hboot menu.
Thank you so much!!
Have you got a custom recovery?
If so, flash a new rom
I tried recovery. It turns into a blackscreen with a phone in the middle and a read triangle with a ! on top of it.
I dunno if that is telling me to not turn off the phone.
MacaronyMax said:
Have you got a custom recovery?
If so, flash a new rom
Click to expand...
Click to collapse
I do not think I have a custom recovery.
How do I check?
yukei said:
I do not think I have a custom recovery.
How do I check?
Click to expand...
Click to collapse
no, from your description above, you just have stock.
I have an idea that you should be able to fasboot install a new recovery, then from there you will be able to flash a new rom.
Lennyuk said:
no, from your description above, you just have stock.
I have an idea that you should be able to fasboot install a new recovery, then from there you will be able to flash a new rom.
Click to expand...
Click to collapse
Oh ok. I think I'm a bit more calm now. So is there anything you need to know? In regards to the blackscreen with the red triangle warning sign in the middle. Can reset my phone?
yukei said:
Oh ok. I think I'm a bit more calm now. So is there anything you need to know? In regards to the blackscreen with the red triangle warning sign in the middle. Can reset my phone?
Click to expand...
Click to collapse
I take it you know how to use adb (based on the root process you were trying to do)?
Lennyuk said:
I take it you know how to use adb (based on the root process you were trying to do)?
Click to expand...
Click to collapse
I know some. But not everything. Only the very basics. I have had a rooted hero before. I have had some experience with it.
I am not able to use adb tho. (As in, can't get it to work currently)
when i type "adb remount"
it says "error: device offline"
I have plugged in the USB cable.
basically all you need to do is find the clockwork mod recovery image file
put it in your adb folder
turn phone on hboot, and select fastboot
then type the following into your pc
"fastboot flash recovery [recovery.img]"
obviously replace [recovery.img] with whatever your recovery is called (and no [])
then you should be able to boot into clockwork mod recovery and from there you can install a new rom.
before I really do anything wrong here, would you be able to direct me to an image file?
http://forum.xda-developers.com/showthread.php?t=834731&highlight=cwm+recovery
i have found this thread. however, there is no option to download the recovery file.
yukei said:
before I really do anything wrong here, would you be able to direct me to an image file?
Click to expand...
Click to collapse
use this one for now, you can update with a newer one after your booted back to a rom
http://forum.xda-developers.com/showthread.php?t=834731

Help ME! :(

My g2 only charges when connected to the computer and i cant sync nothing! I cant look at my files!
How do you expect someone to help you when you don't give any meaninful information?
U rooted etc etc etc
Sent from my HTC Vision using xda premium
i supposed you rooted your phone... HTC Sync won't work anymore if you flashed a custom ROM...
and please give us more info... what u tried, what did u do...
—————
|RIROZIZO|
—————
ummm i got the phone used i dont know if the previous user rooted it... im on android 2.3.4... should i just factory reset it?
sebas81 said:
ummm i got the phone used i dont know if the previous user rooted it... im on android 2.3.4... should i just factory reset it?
Click to expand...
Click to collapse
i recommend going to an IRC client, connect to freenode, go to channel #G2ROOT and talk to the guys there... they could help you
—————
|RIROZIZO|
—————
You really haven't supplied any useful information, where we could even begin to try to help you.
Have you connected your phone to your computer successfully before, and only recently not working? Did you change anything?
redpoint73 said:
You really haven't supplied any useful information, where we could even begin to try to help you.
Have you connected your phone to your computer successfully before, and only recently not working? Did you change anything?
Click to expand...
Click to collapse
no it has never connected successfully i know what im talking about lol ive rooted a htc hd 2 (other phone dont get confused) before i just cant get it to sync to the computer. It does charge though
sebas81 said:
no it has never connected successfully i know what im talking about lol ive rooted a htc hd 2 (other phone dont get confused) before i just cant get it to sync to the computer. It does charge though
Click to expand...
Click to collapse
Well, apparently you don't know what you're talking about. There is no such thing as rooting on Windows Mobile. You're talking about HardSPL.
Did you install the HTC drivers or HTC Sync?
To find out whether your phone is rooted go into the bootloader (turn phone off, then hold volume down when you power it back on). When the bootloader starts up if it says "S-OFF" at the top of the screen you are rooted. If it says "S-ON" then you are not.
jgummeson said:
To find out whether your phone is rooted go into the bootloader (turn phone off, then hold volume down when you power it back on). When the bootloader starts up if it says "S-OFF" at the top of the screen you are rooted. If it says "S-ON" then you are not.
Click to expand...
Click to collapse
i got info and its rooted... there is is an factory reset button
I got HBOOT...
Hboot0.82.0008
my Radio is-26.13.04. 19_m
I just want to be the little italian man (mario) i need to insert roms
you could still downgrade with PC10IMG.zip file (download link in rooting guide on wiki). Than it should be working fine - but you loose root!
(last time I was rerooting it took me less than 5 minutes, so it should not be such a big problem )
anyother thoughts?
sebas81 said:
anyother thoughts?
Click to expand...
Click to collapse
Try a different computer/USB cable?
Can ADB see your device when it's plugged in?
Are you S-OFF? If so, try flashing a different ROM and see if the problem goes away.
Like others said, too difficult to definitively say what's going wrong without you providing some more information.
tun4f1sh said:
try a different computer/usb cable?
Can adb see your device when it's plugged in?
Are you s-off? If so, try flashing a different rom and see if the problem goes away.
Like others said, too difficult to definitively say what's going wrong without you providing some more information.
Click to expand...
Click to collapse
i am s off
how do you flash a custom rom, im stupid and cant find it :'( and btw this has to be through an sd card cause i think cant do nothing with my usb :/
do you have root permitions ? if so - download rom manager (at market), at first click on flash clockwork recovery and when its done take "download rom" - choose which one you want to and follow the steps that will rom manager tell you.
otherwise you could (after flashing recovery) put some rom to your sdcard, go to the recovery (power button + volume up; take care to not have pc10img file on your sdcard in that moment) - go to the recovery, wipe data /cache, advanced - wipe battery status / dalvik; back , instal zip - choose zip file with rom - and you are ready to go.
... says an error occurred while attempting to run privileged commands D:
i do have recovery mode what can i do with that?
otherwise you could (after flashing recovery) put some rom to your sdcard, go to the recovery (power button + volume up; take care to not have pc10img file on your sdcard in that moment) - go to the recovery, wipe data /cache, advanced - wipe battery status / dalvik; back , instal zip - choose zip file with rom - and you are ready to go.[/QUOTE]
Is there a guide for this?

GN not starting

hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
now i am stuck on below attachment please help thnkzz so much for all reply till now
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
GSM or LTE Gnex? What ROM were you running?
Golden rule: Do a backup before doing anything to your phone!
Now all you can do is to download EXACTLY same ROM as you were using by now, wipe cache/dalvik-cache, flash this ROM once again and hope that i'll boot. If it won't you'll have to wipe /data is well.
Sleuth255 said:
GSM or LTE Gnex? What ROM were you running?
Click to expand...
Click to collapse
HI
its gsm i tried to flashed the same rom but still the same only i can access is to recovery
cordell507 said:
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
tnkz bro but i am new to android please help how to do it with Odin
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
nonione said:
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
Click to expand...
Click to collapse
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
salym said:
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
Click to expand...
Click to collapse
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Change your spark plugs.
Sent from my Nexus in Texas.
spaceman860 said:
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Click to expand...
Click to collapse
Hi bro i tired with Odin but stops on userdata any help thnkzzzz
salym said:
hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
Click to expand...
Click to collapse
i am stuck on this now please help
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
Still have a bootloader? Are you serious? You need to learn how to use an android device as well.
To the OP: Do a factory reset in Clockwork and go to mounts
and format /system. Flash the ROM zip. Profit.
Absolutely serious. Have you been reading this thread? The OP needs to start at ground zero and stop just trying every tool he/she sees. My purpose was to get this person to do some research and I was establishing a knowledge baseline. One plan I was considering was to help the OP install the GNex toolkit then locate stock images and obtain a working build. Your cryptic one liner bit should prove vastly more useful to this guy though. I'll let you have at it and go back to my dev work. lol at least this post was a good way to make sure gapps/root capabilities are properly cooked into my latest test build ....
Sent from my Full AOSP on Toro using xda premium
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
U r right i am not good in android but i tried to be and this happens, meanwhile nothing shows after i start the device it shows the !!!! mark with device the PC logo,this happens due to ODin actually the SUMSUNG ADB interface shows ! mark because i cant debug from device even no bootloader works any more thnkz for replying
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
bk201doesntexist said:
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
Click to expand...
Click to collapse
i tried more than one day on this issue its only starts with !!! mark on it nothing else, i have attached the pic i cant access any bootloader or any cwm or any thing all i did with Odin and stuck to attached pic even i start the device its shows the same pic.
http://www.youtube.com/watch?v=WdM2M8Nz6QQ this I used on Odin
thnkzz
As I suspected earlier, it appears that the OP may have trashed his bootloader partition when he tried using Odin to flash the 4.0.2 factory image (which includes a bootloader). At one point he had CWM but not any more since he can't boot to the recovery partition.
Another possibility is that the Odin tool itself places the device in this mode and it can't be manually reverted by starting up in fastboot mode. Looking at the picture, it literally appears that the phone is saying that a flashing operation is half finished but the phone has lost the PC connection... This would be a lot like what I've experienced with iPhones.
In either case, I can deduce that Odin is the tool to use to clear this softbrick.
Hopefully, it'll be flame-off now Sdobron. Perhaps you might want to help out here since I'm not up to speed on the Odin tool myself and would like to learn more about it.
@salym: I know this may be redundant but I need to establish your problem baseline empirically. Once again, can you verify that when you hold vol down/vol up then press power that you get the image you posted?
Use Fastboot!
Dude, it looks like your problem is with crappy boot sector.
While turning on your phone, hold both volume up and volume down buttons, and long press power button untill you feel single vibrate feedback.
Then connect your phone to the computer via USB, and if it doesn't detect drivers, google "samsung android usb driver". Additionally you can install PDANet application (X64 or x86 depending on you system).
THen download Fastboot - there are plenty of instructions how to flash it, and flash stock images (that come with radio, boot sector, rom itself, etc) - there are also plenty of discussions about how to do it. PM if you have any other questions!

[Q] Samsung t989 Galaxy S II - Bootloop HELP please :(

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!
still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?
phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:

[Q] One M8 Stuck on Logo...Period

I am in need of some serious help. My AT&T M8 won't boot past the HTC logo screen and won't allow me to go into recovery or the hboot screen. I believe I may have wiped the OS on it; this is the only thing I can think of that makes sense. Furthermore, when I try to power down the device by long pressing the power button, it doesn't respond at all. It just stays on the logo screen. It was so bad that I just left it plugged in overnight and I don't have a clue as to how long it took to power off because I fell asleep before it did. If there's a video tutorial out there that someone has or simply a link that can show me how to install something via backdoor on this device, that would be great!
alpinesun said:
I believe I may have wiped the OS on it; this is the only thing I can think of that makes sense. !
Click to expand...
Click to collapse
Recount as best you can, all the steps that got the phone to this point.
What were you trying to do when this happened?
Also, need much more info in order to help:
1) bootloader unlocked?
2) custom or stock recovery
3) custom ROM?
4) what hboot number?
5) s-on or s-off
6) did you make a nandroid with custom recovery?
alpinesun said:
Furthermore, when I try to power down the device by long pressing the power button, it doesn't respond at all. It just stays on the logo screen.
Click to expand...
Click to collapse
Hold power and vol up for several seconds to force a reboot. The moment the screen goes dark to reboot, let go of those buttons, and just hold vol down. Don't let go until the hboot screen appears.
Thanks already. I didn't realize I had to hold down the volume down button after it goes dark. It got me into twrp. I believe I should be good from here after I download a new rom to sideload. But to give you a run down, I was prepping the phone to sell it by wiping the data and installing the rom the guy said he wanted on it. When I was going thru the normal procedure to install the rom (wipe, flash, etc) that's when the phone started sticking on the logo screen. My assumption was that I downloaded a bad rom, so since then I've been trying to get back into twrp so I can load a new rom and finally was able to after you told me this. I'll report back if a new rom actually didn't help the situation. I only thought I wiped the OS because something similar happened with my Note when I was tinkering and that was the result.
alpinesun said:
I'll report back if a new rom actually didn't help the situation.
Click to expand...
Click to collapse
If you need any further help, please answer all the questions I previously asked.
Good luck.
redpoint73 said:
Recount as best you can, all the steps that got the phone to this point.
What were you trying to do when this happened?
Also, need much more info in order to help:
1) bootloader unlocked?
2) custom or stock recovery
3) custom ROM?
4) what hboot number?
5) s-on or s-off
6) did you make a nandroid with custom recovery?
Hold power and vol up for several seconds to force a reboot. The moment the screen goes dark to reboot, let go of those buttons, and just hold vol down. Don't let go until the hboot screen appears.
Click to expand...
Click to collapse
So, it seems I'm still having the problem, even while trying to install cyanogen. Here are the answers to those questions...
1) bootloader unlocked?... YES
2) custom or stock recovery... TWRP
3) custom ROM?... It was a custom AOSP Rom
4) what hboot number?... 3.16.0.0000
5) s-on or s-off... S-OFF
6) did you make a nandroid with custom recovery?... It was erased
Any help you can give from this point would be awesome. Thanks again!
alpinesun said:
So, it seems I'm still having the problem, even while trying to install cyanogen.
Click to expand...
Click to collapse
Failure to flash ROMs can often be solved with fastboot erase cache, then install TWRP by fastboot again. Update TWRP version, if you are using an outdated one.
Also, if you try to flash any ROMs based on Sense software beyond version 1.x (huge majority of them are past 1.x at this point) you will likely experience extremely long boot times (10 minutes or more) and broken WiFi due to outdated firmware. But CM should be okay.
alpinesun said:
6) did you make a nandroid with custom recovery?... It was erased
Click to expand...
Click to collapse
It was erased, or you wiped it?
Okay. Do you suggest trying an older sense rom to see if it works? The last time touched the phone was when I picked up my Note 4, so I will look for something that predates that.
As for the nandroid being erased, I can only assume it was my actions that caused it to be deleted, but I don't recall intentionally doing it.
alpinesun said:
Okay. Do you suggest trying an older sense rom to see if it works?
Click to expand...
Click to collapse
Sure, it couldn't hurt. With your current firmware, you will need a ROM based on 1.x software. There aren't a heck of a lot of those left. But there are a few. GoldenEye is one I can personally vouch for, since I was running it for a while back in the day:
http://forum.xda-developers.com/showthread.php?t=2705640
But I would definitely recommend just trying fastboot erase cache and re-install TWRP first. I've lost count how many times suggesting this simple fix has helped other users here on XDA, when ROMs fail to flash.
alpinesun said:
As for the nandroid being erased, I can only assume it was my actions that caused it to be deleted, but I don't recall intentionally doing it.
Click to expand...
Click to collapse
Fair enough. Just FYI, don't do a factory reset in bootloader (in the OS settings or recovery is OK). On modded phones this may cause the internal storage to become corrupted. Nandroids have sometimes been lost this way. This may or may not be what happened to you. Just wanted to throw that out there.
Also, there has been the occasional occurrence of internal storage being corrupted, possibly by TWRP. It may not even have been something you caused.

Categories

Resources