Hey everyone.
I own a Samsung Galaxy Gio GT-S5660M With Android 2.3.4 Gingerbread that I got from Bell Aliant Along With a Motorola Xoom Wifi Canadian That I bought at Wal-Mart one day.
I am intrested in flashing Custom Roms onto My Samsung Galaxy Gio Gt-S5660M. I have Rooted and Installed ClockworkMod on my Samsung Galaxy Gio Gt-S5660M. I have recently been looking up stuff on how to install them onto my Samsung Galaxy Gio Gt-S5660M. I recently attempted to install Android 4.0.3 Ice cream Sandwich onto it. and I realized that I installed the wrong one because it was for the S5660M Model Not the GT-S5660M, Resulting into a boot failure. as the screen would fade out to black when booting to the Operating System. I was still able to access the Recovery mode (I never Had ClockworkMod Installed at that time) and the Custom ROM Download mode (Vol Down + Home + Power button) but it would fail to connect to my PC (Windows 7 Home Premium & Ubuntu Linux 64-bit) So Later on I told my dad about it and he sent it to bell Aliant to get it fixed. And now I would like to know how I can install a custom ROM and If I ever come across this problem again, how can i solve it without taking it to Bell Aliant to get fixed (Since it's a software related issue)
Thank You For reading and I hope to hear a reply for someone.
When you flash a rom it is very important to do a backup before hand. You sound like your new to this so your in the right place. Whenever you do a back up and you run into a problem like the one you ran in to, it's very simple to restore back to its original state. Also, most companies won't cover software issues once they figure out your rooted. So you might run in to a problem with your company. My advice is to read read read read and ask as many questions as possible before doing anything to your phone you aren't sure about.
Sent from my SGH-T989 using xda premium
Some more things, it is very useful for you to download ROM MANAGER and TITANIUM BACKUP from the app store. These two apps are life savers when you run in to the problem you had. Also read on how to use clock work mod recovery. Try to get very acquainted with that program as it will be ure main life saver in any situation.
Sent from my SGH-T989 using xda premium
help to reistalled stock rom 2.3.6
i have gio updated to 2.3.6 from samsung kies. then i flash CM9 nightly on 12 jun-2012.
i m new to this and made a mistake did not creat backup.
now i wana reinstall gingerbird 2.3.6.
plz help me... plzzzz
[email protected] said:
i have gio updated to 2.3.6 from samsung kies. then i flash CM9 nightly on 12 jun-2012.
i m new to this and made a mistake did not creat backup.
now i wana reinstall gingerbird 2.3.6.
plz help me... plzzzz
Click to expand...
Click to collapse
hold the power button, the volume down button, and the HOME button at the same time, when the phone is off. then use a tutorial on how to flash roms with ODIN, download a rom from sammobile.com
Here's some ROM's that I am interested in installing:
http://forum.xda-developers.com/showthread.php?t=1414173&page=435
http://forum.xda-developers.com/showthread.php?t=1659450
http://forum.xda-developers.com/showthread.php?t=1708383
Would I install them something like this?:
1. Download & Place this rom on your root sdcard
2. Go to recovery mode
3. Install zip from sdcard, install rom (cwm) | Install menu, install rom (RZR)
4. Wait till installation completed
5. Reboot
7. Reboot & Play
also about Rom Manager, I read this Thread:
http://forum.xda-developers.com/showthread.php?t=1706999
but I can't get the "GT-s5660m" Option to show up on it. Maybe it's the M on the end of it
After the installation is finished, you need to do a factory reset, then reboot.
Otherwise you cant boot.
And for cm9 it may be required to have atleast a gingerbrea2.3.x rom
Sent from my GT-S5660 using xda premium
Vzqsmooth56 said:
Some more things, it is very useful for you to download ROM MANAGER and TITANIUM BACKUP from the app store. These two apps are life savers when you run in to the problem you had. Also read on how to use clock work mod recovery. Try to get very acquainted with that program as it will be ure main life saver in any situation.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Rom manager isnt good for the new ones, cause they will probably end up with a nice brick to throw at you
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!
(Frank) said:
Rom manager isnt good for the new ones, cause they will probably end up with a nice brick to throw at you
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!
Click to expand...
Click to collapse
Its Not bad for new phones, for new people, as they dont know how to use it..
Sent from my GT-S5660 using xda premium
voetbalremco said:
Its Not bad for new phones, for new people, as they dont know how to use it..
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
With new ones I was actually talking about "people"
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!
voetbalremco said:
After the installation is finished, you need to do a factory reset, then reboot.
Otherwise you cant boot.
And for cm9 it may be required to have atleast a gingerbrea2.3.x rom
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I have Android 2.3.4 on it will that work?
Also how can I backup my Stock rom on it as well.
I noticed a backup and restore option in Clockworkmod as well (I have Version 5.0.2.6) Will that work incase I mess up again?
First of all, do not use ROM Manager to install CWM, you will brick the device doing so.
The nandroid backup function in CWM should work, but having a working Odin install with your Odin-flashable stock ROM backup is always a nice plus.
While I don't have one personally, there have been reports on here of the same USB jig (a micro USB connector with the appropriate resistor between pins 4 and 5) used on the Galaxy S Vibrant working on the Gio as well. This is if it doesn't want to go into download mode anymore.
These are a few gotchas with flashing ROMs on the Gio I can think of right now:
-Don't flash the Euro baseband on the 5660M and vice versa. (The AMSS image in Odin tar files)
-Be sure to have your partitions in the appropriate file system format, and CWM to go with it. I'm talking about ext4 and Samsung's stock, and proprietary RFS format.
If you have the usual MUGK3 stock ROM all Canadian 5660Ms have been delivered with, install CWM (via Odin, or with root and the dd command), format to ext4 and install the latest CM9 nightly zip file. Nothing more to it really.
Darkshado said:
First of all, do not use ROM Manager to install CWM, you will brick the device doing so.
The nandroid backup function in CWM should work, but having a working Odin install with your Odin-flashable stock ROM backup is always a nice plus.
While I don't have one personally, there have been reports on here of the same USB jig (a micro USB connector with the appropriate resistor between pins 4 and 5) used on the Galaxy S Vibrant working on the Gio as well. This is if it doesn't want to go into download mode anymore.
These are a few gotchas with flashing ROMs on the Gio I can think of right now:
-Don't flash the Euro baseband on the 5660M and vice versa. (The AMSS image in Odin tar files)
-Be sure to have your partitions in the appropriate file system format, and CWM to go with it. I'm talking about ext4 and Samsung's stock, and proprietary RFS format.
If you have the usual MUGK3 stock ROM all Canadian 5660Ms have been delivered with, install CWM (via Odin, or with root and the dd command), format to ext4 and install the latest CM9 nightly zip file. Nothing more to it really.
Click to expand...
Click to collapse
I am not going to use ROM Manager to begin with. as my device is not listed.
I used the recovery to install Clockworkmod (CWM)
Also I noticed that some ROMs are strictly for S5660M Not the GT-S5660M.
If I want to Install a Rom That For the GT-S5660 Does it Matter if it has the "M" in the name of my model? as in GT-S5660M
Also is it possible to flash zip files with odin?
Or has the ROM only have to be in tar format?
One last thing
Well, Before I start flashing (Because I'm pretty close to knowing now)
I am going to post 5 final questions before I begin:
1) Does it matter about my Model code for a ROM?
EX: ROM Made for the S5660 or GT-S5660 And I want to Install it on my GT-S5660M
2) If I Come across the problem I had earlier that caused me to take it to bell to get it fixed, Will the Nandroid Backup & Restore fix it?
3) Is it possible to mess up installing a ROM that the phone is inaccessible to the Recovery & ROM Flasher?
4)If I forget to Factory reset my phone while installing a ROM, can I go back to the recovery and factory reset and reboot?
5)If I Choose to install this ROM:
http://forum.xda-developers.com/showthread.php?t=1414173
Can I install it on my GT-S5660M since I have Android 2.3.4?
If I Choose the Other 2 I mentioned:
http://forum.xda-developers.com/show....php?t=1659450
http://forum.xda-developers.com/show....php?t=1708383
Does it Matter what version of Android I have?
Once These questions are answered I will begin Installing Custom ROMs onto my GT-S5660M
Super Liam said:
Well, Before I start flashing (Because I'm pretty close to knowing now)
I am going to post 5 final questions before I begin:
1) Does it matter about my Model code for a ROM?
EX: ROM Made for the S5660 or GT-S5660 And I want to Install it on my GT-S5660M
2) If I Come across the problem I had earlier that caused me to take it to bell to get it fixed, Will the Nandroid Backup & Restore fix it?
3) Is it possible to mess up installing a ROM that the phone is inaccessible to the Recovery & ROM Flasher?
4)If I forget to Factory reset my phone while installing a ROM, can I go back to the recovery and factory reset and reboot?
5)If I Choose to install this ROM:
http://forum.xda-developers.com/showthread.php?t=1414173
Can I install it on my GT-S5660M since I have Android 2.3.4?
If I Choose the Other 2 I mentioned:
http://forum.xda-developers.com/show....php?t=1659450
http://forum.xda-developers.com/show....php?t=1708383
Does it Matter what version of Android I have?
Once These questions are answered I will begin Installing Custom ROMs onto my GT-S5660M
Click to expand...
Click to collapse
1 .zip files that you flash via recovery can be flashed easily, thats fine
Just watch out with odin roms like gioprio, they contain a baseband and you will have no service, but can easily be solved by flashing a m model baseband
2 I think not
3 no, unless you do it terribly wrong
Flashed 20+ roms and nothing bricked
4 yes.
Make sure partitions are ext4.. This can be done with ext4formatter zip or installing for example cm7 rom first, than cm9.
Just stay on gingerbread, android 2.3 or higher
2.3.3 or 2.3.4 doesnt make a difference
Sent from my GT-S5660 using xda premium
4 yes.
Make sure partitions are ext4.. This can be done with ext4formatter zip or installing for example cm7 rom first, than cm9.
Just stay on gingerbread, android 2.3 or higher
2.3.3 or 2.3.4 doesnt make a difference
Click to expand...
Click to collapse
So you're saying that I should install Cm7 and then CM9?
Would It matter if I choose CM7 or CM7.2?
and you're also saying I should install a ROM that has Android 2.3.X instead of one with Android 4.0.X?
OH! I forgot to ask one last question:
Where can I get a Stock ROM For my GT-S5660M?
Can I get it off my phone or would I have to download it off a website?
Yea I know I may asking a lot of questions, I just want to know how I can install a ROM properly without bricking it.
as for the last 2 ROMs i mentioned earlier, the process is the same eh?
I just need the most information that I can get.
Hi there.
There is a compiled list of all ROMs for the 5660 and 5660m Gio in the development area.
the Stock Rom for 5660M (The GT is nothing to worry about) is this link
http://forum.xda-developers.com/showthread.php?t=1385874
There are a few other custom roms made only for the 5660M.
You can absolutely use a rom that is s5560, but note:
If you are selecting a Rom that is flashed using odin, always open the .tar using winzip or 7zip and just check for a file called amss ... this is the broadband file which would cause you to lose your phone signal. if you want to use the ROM, remove that amss file.
is you are flashing a rom through clockwordmod, these don't change the broadband.
so you can freely use any of those ones, such as cm7, 7.1, 7.2 9 or other based on stock roms.
Cyanogenmod (cm) requires the internal file system to be ext4, where as most Rom based on stock can use either rfs (stock file system) or some do support ext4 internal for a bit of increased speed.
also check out this site
http://android.phiexz.com/device/galaxy-gio.html
if you need additional memory for more apps, there are such things as a2sd, link2sd and s2e you can research...
bdasmith said:
Hi there.
There is a compiled list of all ROMs for the 5660 and 5660m Gio in the development area.
the Stock Rom for 5660M (The GT is nothing to worry about) is this link
http://forum.xda-developers.com/showthread.php?t=1385874
There are a few other custom roms made only for the 5660M.
You can absolutely use a rom that is s5560, but note:
If you are selecting a Rom that is flashed using odin, always open the .tar using winzip or 7zip and just check for a file called amss ... this is the broadband file which would cause you to lose your phone signal. if you want to use the ROM, remove that amss file.
is you are flashing a rom through clockwordmod, these don't change the broadband.
so you can freely use any of those ones, such as cm7, 7.1, 7.2 9 or other based on stock roms.
Cyanogenmod (cm) requires the internal file system to be ext4, where as most Rom based on stock can use either rfs (stock file system) or some do support ext4 internal for a bit of increased speed.
also check out this site
http://android.phiexz.com/device/galaxy-gio.html
if you need additional memory for more apps, there are such things as a2sd, link2sd and s2e you can research...
Click to expand...
Click to collapse
About this Ext4formatter.zip that voetbalremco mentioned, where can I get it to, would I do this before installing the rom or after installing the ROM?
I know that I need to wipe cache partition, factory reset, and wipe Dalvik cache.
Would I do all of this first or after installation?
Like I said earlier I'm sorry for asking a lot of questions, I just need to most information I can get. lol
Super Liam said:
About this Ext4formatter.zip that voetbalremco mentioned, where can I get it to, would I do this before installing the rom or after installing the ROM?
I know that I need to wipe cache partition, factory reset, and wipe Dalvik cache.
Would I do all of this first or after installation?
Like I said earlier I'm sorry for asking a lot of questions, I just need to most information I can get. lol
Click to expand...
Click to collapse
Exformatter.zip
You use it before installing, same thing with the wipes.
By the way, this ext4formatter is a one time event.
Once it is done, its done.
The wiping is every time before you install a different rom.
WOOT!!!!!
I got CyanogenMod 7.2 sucessfully installed!!!
Thank you guys so much!!
Also I have a question:
If I ever want to upgrade from CyanogenMod 7.2 to CyanogenMod 9, How would I do it?
Related
Hello forum-members!
I have a question I really want to ask: How can I update my Samsung Galaxy Gio GT-S5660 from stock 2.3.3 to CyanogenMod 9.0.0?
With CM9, I mean the version for Gio, as found on this page:
http://forum.xda-developers.com/showthread.php?t=1414173
At the moment, my mobile is like this:
Firmware: stock 2.3.3
PDA: S5660XXKPS
PHONE: S5660XXKPA
CSC: S5660XENKP1
Rooted using the update.zip-methode, installed Titanium Backup
ClockWorkMod-based Recovery v5.0.2.6 installed (But I still have a problem with it, it says things like 'E:Can't mount /cache/recovery/command' and 'E:Can't open /cache/recovery/last_log', no idea if I have to fix this or not...)
So, how can I update this stock 2.3.3 to CM9? I only have a lot of experience with jailbreaking, but not with flashing ROMS and installing special Android tools, so a bit of step-by-step guide.
If you think updating to CM7 is better for me, since that's a more complete ROM, please say it, which CM7 ROM, and how it can be done
I hope someone is able to help me, as I would really like to use a nice ROM on my Gio
You should use cm7.2, its stable and fast..
Sent from my GT-S5660 using xda premium
markvann said:
Hello forum-members!
I have a question I really want to ask: How can I update my Samsung Galaxy Gio GT-S5660 from stock 2.3.3 to CyanogenMod 9.0.0?
With CM9, I mean the version for Gio, as found on this page:
http://forum.xda-developers.com/showthread.php?t=1414173
At the moment, my mobile is like this:
Firmware: stock 2.3.3
PDA: S5660XXKPS
PHONE: S5660XXKPA
CSC: S5660XENKP1
Rooted using the update.zip-methode, installed Titanium Backup
ClockWorkMod-based Recovery v5.0.2.6 installed (But I still have a problem with it, it says things like 'E:Can't mount /cache/recovery/command' and 'E:Can't open /cache/recovery/last_log', no idea if I have to fix this or not...)
So, how can I update this stock 2.3.3 to CM9? I only have a lot of experience with jailbreaking, but not with flashing ROMS and installing special Android tools, so a bit of step-by-step guide.
If you think updating to CM7 is better for me, since that's a more complete ROM, please say it, which CM7 ROM, and how it can be done
I hope someone is able to help me, as I would really like to use a nice ROM on my Gio
Click to expand...
Click to collapse
Taken from guide:
Flash Cyanogenmod 9:
Code:
Download and copy the latest CM9 ROM to SD Card http://bm.zxy.me/kitchen/download/gio/cm9_galaxyics-gio-ota-eng.maju-alpha3.zip
Reboot to Recovery Mode
Select Install zip from sd card
Select Choose zip from sd card
Select the new CM9 rom package
Select Yes - Install update
Wait till the Installation is finish
Now select Wipe data/factory reset
Confirm
Now reboot to phone.
Wait and enjoy CM9 on your Galaxy Gio
Good luck and yes i get those errors too in CWM
Maybe u should wait a little Maclaw said we will get a new alpha / beta this days with more fixes, up to u
Note once more: you should wait for a more stable release of cm9
Sent from my GT-S5660 using xda premium
SilviuMik said:
Taken from guide:
Flash Cyanogenmod 9:
Code:
Download and copy the latest CM9 ROM to SD Card -SNIP-
Reboot to Recovery Mode
Select Install zip from sd card
Select Choose zip from sd card
Select the new CM9 rom package
Select Yes - Install update
Wait till the Installation is finish
Now select Wipe data/factory reset
Confirm
Now reboot to phone.
Wait and enjoy CM9 on your Galaxy Gio
Good luck and yes i get those errors too in CWM
Maybe u should wait a little Maclaw said we will get a new alpha / beta this days with more fixes, up to u
Click to expand...
Click to collapse
Okay, I am still thinking what I am going to flash on my phone... But one thing; If I do it the way you just posted here, I don't have to install CM7.2 before installing CM9?
markvann said:
Okay, I am still thinking what I am going to flash on my phone... But one thing; If I do it the way you just posted here, I don't have to install CM7.2 before installing CM9?
Click to expand...
Click to collapse
No, you dont..
Sent from my GT-S5660 using xda premium
voetbalremco said:
No, you dont..
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Okay!
Well, to be honest, I think I will flash CM9 on my Gio if a new version comes out.
But what if it turns out wrong, or when the ROM does not meet my expectations? Is there a easy way to return to the stock 2.3.3 firmware?
markvann said:
Okay!
Well, to be honest, I think I will flash CM9 on my Gio if a new version comes out.
But what if it turns out wrong, or when the ROM does not meet my expectations? Is there a easy way to return to the stock 2.3.3 firmware?
Click to expand...
Click to collapse
Flash clockworkmod recovery, make a backup, wich means all dats cache system will be backed up, so you can flash cm7 or 9 without problems and restore the full rom via the backup if you dont like it
Sent from my GT-S5660 using xda premium
voetbalremco said:
Flash clockworkmod recovery, make a backup, wich means all dats cache system will be backed up, so you can flash cm7 or 9 without problems and restore the full rom via the backup if you dont like it
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Yes, I already flashed a version of ClockWorkMod (px-CWM-v2.zip), but as I mentioned in my first post, I have a problem with it... Do you maybe know a solution? I heard something about ext4 or something like that to fix it?
markvann said:
Yes, I already flashed a version of ClockWorkMod (px-CWM-v2.zip), but as I mentioned in my first post, I have a problem with it... Do you maybe know a solution? I heard something about ext4 or something like that to fix it?
Click to expand...
Click to collapse
u're installed wrong version of cwm
that cwm only work on cyanogenmod/custom rom with ext4 filesystem
u should use this one
http://www.mediafire.com/?3umwbz3gg6oo6c6
Okay, thank you!
One last question: if I update to CM9, will my baseband get updated?
If so, will my carrier still work with my phone?
It wont, so it will work
Sent from my GT-S5660 using xda premium
http://forum.xda-developers.com/showthread.php?t=1414173
download for cwm for galaxy gio: http://www.mediafire.com/?p7r2bcn9447bpc8
ClockWorkMod:
- Download: px-CWM-v2.zip
- Place it on root of your sdcard
- reboot to recovery mode
install this cwm from recovery
Flash Cyanogenmod 9:
- Download and copy the latest CM9 ROM to SD Card
- Reboot to Recovery Mode
- Select Install zip from sd card
- Select Choose zip from sd card
- Select the new CM9 rom package
- Select Yes - Install update
- Wait till the Installation is finish
- Now select Wipe data/factory reset
- Confirm
- Now reboot to phone.
- Wait and enjoy CM9 on your Galaxy Gio\
READ: If I wee you, wait for alpha 4 to release tomorrow and flash tomorrow. It fixes a lot of problems and you cant yet use the current version very good :S
Please, help me!
I installed CM9 beta 3 on my gio, after flashing the CWM-version phiexz posted here in this topic (http://www.mediafire.com/?3umwbz3gg6oo6c6). I did everything discribed in the topic of CM9 for Gio port.
Flash Special Clockworkod Recovery for CyanogenMod 9:
skip this step if you have special clockworkmod (CM7.1/CM7.2/GM9) installed on your phone
Download: px-CWM-v2.zip
Place it on root of your sdcard
reboot to recovery mode
install this cwm from recovery
I didn't have to do this first part, since I already had CWM installed on my Gio.
Flash Cyanogenmod 9:
Download and copy the latest CM9 ROM to SD Card
Reboot to Recovery Mode
Select Install zip from sd card
Select Choose zip from sd card
Select the new CM9 rom package
Select Yes - Install update
Wait till the Installation is finish
Now select Wipe data/factory reset
Confirm
Now reboot to phone.
Wait and enjoy CM9 on your Galaxy Gio
I did everything just as described here... AND I did not forget to select 'Wipe data/factory reset' as said in this short tutorial, so that's not the problem!
Click to expand...
Click to collapse
But after all this, it stucks on saying 'ANDROID'. If I turn off the phone, it automatically turns on again. I can still enter CWM Recovery, but if I click on 'restore backup' (because I made a backup of my stock ROM before flashing CM9), it says:
Code:
Checking MD5 sums...
Eresing boot before restore...
Restoring boot image...
Restoring system...
E:format_volume: format_rfs_device failed on /dev/block/stl12
Error while formatting /system!
My question now is:
Is there a way I can make CM9 work on my Gio (I prefer this one), restore my backup, or connect to Kies, so I can place a clean stock ROM on my Gio?
I hope someone can help me!
markvann said:
Please, help me!
I installed CM9 beta 3 on my gio, after flashing the CWM-version phiexz posted here in this topic (http://www.mediafire.com/?3umwbz3gg6oo6c6). I did everything discribed in the topic of CM9 for Gio port.
But after all this, it stucks on saying 'ANDROID'. If I turn off the phone, it automatically turns on again. I can still enter CWM Recovery, but if I click on 'restore backup' (because I made a backup of my stock ROM before flashing CM9), it says:
Code:
Checking MD5 sums...
Eresing boot before restore...
Restoring boot image...
Restoring system...
E:format_volume: format_rfs_device failed on /dev/block/stl12
Error while formatting /system!
My question now is:
Is there a way I can make CM9 work on my Gio (I prefer this one), restore my backup, or connect to Kies, so I can place a clean stock ROM on my Gio?
I hope someone can help me!
Click to expand...
Click to collapse
Note that cm9 is not in beta 3 but alpha status.
You can flash cm7, same instructions as cm9, much more stable.
Try installing a different version of CWM and restore
Or read tutorials how to use ODIN and flash stock rom
Sent from my GT-S5660 using xda premium
voetbalremco said:
Note that cm9 is not in beta 3 but alpha status.
You can flash cm7, same instructions as cm9, much more stable.
Try installing a different version of CWM and restore
Or read tutorials how to use ODIN and flash stock rom
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Thank you for your reply!
I was already planning to flash CM7 now, but there was only one thing I was still wondering about.
The Cyanogenmod 7 instructions topic says:
NOTE:
It's not automatically wipe your data. if you want to install fresh rom, you must wipe data before install it!
If you from stock / custom rom based on rfs filesystem, u must flash ext4-formatter.zip before flash CyanogenMod. link & instruction can fount on This Thread. otherwise you'll stuck on android logo because it cant mount rfs filesystem!
have problem after upgrade from earlier cyanogenMod? you should wipe your data!!
Click to expand...
Click to collapse
Will the part (here marked in red) still work? And, if so; how to use this? I mean: since my main system is not booting anymore...
Oh, wait!
I flashed the file ext4-formatter.zip and afterwards, I tried flashing CM9 again, and it worked!
markvann said:
Oh, wait!
I flashed the file ext4-formatter.zip and afterwards, I tried flashing CM9 again, and it worked!
Click to expand...
Click to collapse
Nice . Tell me from which country u buyed your phone and what carrier and maybe i can give u stock rom so u have it in case of trouble
Sent from my GT-S5660 using XDA App
SilviuMik said:
Nice . Tell me from which country u buyed your phone and what carrier and maybe i can give u stock rom so u have it in case of trouble
Sent from my GT-S5660 using XDA App
Click to expand...
Click to collapse
Oh, that would be really nice! I bought my phone in my own country (The Netherlands) and my carrier is BEN NL (part of T-Mobile in The Netherlands). But if it might help: I posted my baseband version etc. in my first post of this topic
markvann said:
Oh, that would be really nice! I bought my phone in my own country (The Netherlands) and my carrier is BEN NL (part of T-Mobile in The Netherlands). But if it might help: I posted my baseband version etc. in my first post of this topic
Click to expand...
Click to collapse
Cm9 booted??? All firmware is on sammobile.net , also kies firmwares, but the site is not connected to samsung
By the way if you used ext4 formatter zip you use an version of cwm wich has been removed back to construction to bugs, so you should use another one, in the same thread
Sent from my GT-S5660 using xda premium
hello, i just got my first android phone so I'm new to this sort of stuff, though I love being able to unlock hidden potential of different devices, so naturally I discovered the ability to root smart phones and all that good stuff.
The model I have is the Samsung Galaxy Gio GT-S5660M. It's running 2.3.4. Gingerbread version.
I've been reading a lot of guides and for the most part rooting and adding additional utilities like flash, etc. seems pretty simple. However, I have not yet been able to find out how to create a back of up of my stock firmware when I bought the phone in case I end up bricking it, or decide I want to return to stock.
I've read many guides that claim to show how to create back ups and recovery points, but I'm still having trouble understanding it.
To be more specific, I would like to create as opposed to download, a back up of the phone in it's current state which is, as I said earlier, stock. I did a factory reset since I had some stuff installed while I was fiddling with it for the first time.
thx
You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660
iok1 said:
You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660
Click to expand...
Click to collapse
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?
You cannot create a backup without the recovery mod CWM Clockwork Recovery Mod. But to install this you need your device rooted (modified so you can modify and view system files)
gfyrdr said:
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?
Click to expand...
Click to collapse
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...
0M3G4_ said:
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...
Click to expand...
Click to collapse
+1 That was what I wanted to say
I've already uploaded a stock ROM backup last fall of the same Gingerbread ROM you're running, along with instructions on how to make one yourself or flash mine.
The best advice I can give you is: research, research, and more research.
Good luck,
Darkshado
Sent from my Nexus S using XDA
What software do you recommend to clockworkmod Gio with?
s!mon said:
What software do you recommend to clockworkmod Gio with?
Click to expand...
Click to collapse
I use px-cwm-v2.zip recovery.
You flash it using stock recovery.
thx for the replies. I will give it a try.
Darkshadow, whats the thread's name where you posted the ROM and instructions? I'd like to check that out too.
Also, whats a good rom to consider upgrading to? Something that has the ability to play flash videos.
EDIT:
If I understand correctly, roms are basically whole operating systems that have been customized by the developer. So a rom can be already rooted and have clockwork as well as other custom stuff, and I just need to flash it. The alternative to this is to do everything manualy... root the current OS, add clockwork and whatever else. Correct?
Also, I'm not sure yet if a rooted phone has any extra options on it's own, or if it's only a set up that's sole purpose is to allow other applications to be installed who then will give the user better control over his device.
I've run into a little problem.
I'm following this guide: http://forum.xda-developers.com/showpost.php?p=16963172&postcount=1
I've got Odin and the tar downloaded, but when I go into download mode with my phone and connect it to the PC, it says that the device driver was not successfuly installed, and I get no confirmation in Odin that a connection has been made between the phone and the program.
What am I missing?
Thx.
EDIT:
Nevermind, I needed to install Kies. Don't even need to run it. Apparently it has the driver that's needed.
Okay, I've rooted my phone successfully. Now the next step is to install Clockwork and create a back up.
Now that I understand a little bit the way Odin and flashing ROM works, I think it would be better to just download a stock ROM and in case something goes wrong, I can just flash it the way I flashed the rooted one.
(I think I saw a completely stock ROM somewhere for my model but I don't remember where. A link would be appreciated if it exists.)
Correct me if I'm wrong pls.
Also, if I do that, then is there any reason to install Clockwork since I've read that many ppl have issues with installing it and it's riskier than rooting or installing other software.
Right now I think what I'm most interested in is installing Adobe Flash Player 11 or something of the sort that can play flash videos and streams.
^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
taken from the sticky
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?
I'm using Opera as my browser so from what I've learned, flash doesn't work with it period. Is skyfire a good alternative?
Also, like I said, I don't think I need the clockwork if I can get a clean stock ROM that I can just flash if something goes wrong. As I don't intend to download many apps or add many phone numbers (memorized instead), a backup isn't really needed.
nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser
anonxlg said:
nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser
Click to expand...
Click to collapse
Did you pick the ext4 + rfs version?
Sent from my GT-S5660
Clockwork is not riskier than other things you do. Just follow steps and you see no problems.
anonxlg said:
^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?
Click to expand...
Click to collapse
its an older version, its 5.0.2.7, theres also 5.0.2.8 but these give some problems after installing/wiping, so some people still use the older version.
Hello guys,
I'm new here. I have the same problem as anonxlg. It says can't mount system. I also used the version from the big thread for new users. Can anyone enlighten me on what to do? I've been searching the forum and google, but can't make it work. I feel like a compleet noob now, and I don't feel special about it.
RJ88
Edit: I kept searching, and finally found a working 5.0.2.7 version. First I had another 5.0.2.7 version, but when I tried to install it didn't work. I finally found "signed_cwm-5.0.2.7-flashablezip-ext4+rfs.zip (Flash from Recovery)" on http://forum.xda-developers.com/showthread.php?t=1421650 (through google actually. I have to get used to this site), and I'm making my backup now.
thanks RJA88, backup worked
edit/update
i used the cwm linked and backup worked, i tried installing cm9 beta8 (galaxyics), and it would get stuck after samsung bootscreen (it flashes a white pick or soemthing before full back screen)
i tried restoring backup i made, and it didnt work, some mount error again
i reverted back to 5.0.2.6 and did the restore backup again, and this time it goes up the the galaxy gio gt5660m screen and just stop..
note that i do not know what the rfs/ext4 is for for the gio if that is what is causing problems
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Flash a newer recovery prior to flashing CM10.
EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
Sent from my SGH-I747M using xda premium
such as
SaneinOne said:
Flash a newer recovery prior to flashing CM10.
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Such as...
EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.
okay
GlassRaven said:
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.
Click to expand...
Click to collapse
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?
EdwinForTheWin said:
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?
Click to expand...
Click to collapse
I don't really recommend that as that could cause unwanted trouble. From my experience, I just followed the rooting guide that I posted, flash a custom recovery, and flashed the Cyanogenmod 10. Another tip, if you don't want to lose your contacts, make a backup of it before flashing a ROM. Preferrably you write them in a paper so it would be easier. If you have important messages, use an SMS/MMS backup tool to save them. As for applications, make a list of applications that you consider are essential for you so you could just redownload them. Starting out in a custom ROM is really hard at first but you'll get used to it.
Its safety is directly proportional to your ability to follow directions.
Your first mistake was you used the app to unlock the VERIZON S3 bootloader.
All other versions of the GS 3 have unlocked bootloaders.
You should definitely do some more research before you attempt root and custom recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Can you just use ROM Manager after rooting and flashing the stock ROM to download CWM, then CM10? And is the CM10 you're using on your Rogers phone compatible? I don't see a Rogers version on the CM site. Did you use the AT&T one?
Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att
tonymtl said:
Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att
Click to expand...
Click to collapse
What does touch recovery do? And do I have to use that link to flash it, or can I use ROM Manager? And if I were to use that link, I would DL the zip, boot my phone into download mode, plug in, open Odin, make sure auto reboot and F reset time are checked, load the .tar into the PDA, and click start? What happens to the previous ROM that was there?
And when I first root my phone, and load the stock rom, do all of my apps remain? I haven't rooted yet, for my Rogers phone.
A touch recovery lets you touch the screen as apposed to using the volume rocker.
You will keep all your data.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks for the help! Another question, if I would like to unroot my phone, and decrease the flash counter, is there a thread I should see for the I747MVLLH1? I know about triangle away, but Rogers/my model isn't supported for that.
Triangle away does support Rogers gs3
Thanks! So should I flash CM10 through ROM Manager, or through the link that was posted? I'm not exactly clear on how to flash the ROM through the link though. Does flashing a new ROM erase the previous ROM? And 'wiping cache' doesn't wipe your data/apps right, only 'wipe Data and Cache'? And I don't really need to bother with kernels too right?
If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.
tonymtl said:
If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.
Click to expand...
Click to collapse
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?
Yes it will ask you if you want to wipe, if you download cm10 ROM from ROM manager it will ask you if you want the latest gapps. You can get ROM toolbox or titanium backup to backup your apps and restore them after flashing rom. Backup is just in case but you can always flash stock ROM later if anything goes wrong.
ily112 said:
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?
Click to expand...
Click to collapse
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.
s0ulja said:
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.
Click to expand...
Click to collapse
How exactly would I flash through cwm recovery?
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.
hi im a noob when it comes to phones, normally ill take it to a shop who will find one and install it for me, but i feel like trying this myself
are firmware in general like OSs? are kernels included as well or do i have to look for them? can I use any of them from any country? i dont mind resetting internet/MMS since theyre easy. im talking in computer terms to show how noobish i am
since i cant ask questions on the 'minimal by Judas' thread ill ask it here. is the 1.6 download a full OS with hardware stuff included or is it like a patch where i have to install that on top of an already working MG2? im interested in the zero patch since it removes most bloats, is it another OS or a patch on top of the minimal?
if it isnt too troublesome could someone write up a small walkthrough on using the aroma installer?
if you are alredy on MG2, you should have a working kernel for the minimalzero rom. alternatively you can use D-kernel.
as for the firmware itself, it's like an os. the package is a full rom (system installation, so installing it will first wipe your current system and then recreate it from scratch.
stuff like wifi passes and mms are on data tho, so u will keep that
for aosp based roms tho, the kernel needed will be included in the package, and a data wipe is required as well.
Flashing anything should be done by first flashing a temporary CWM via the stock recovery (look for temporary CWM by shaan in the development section) and then flashing zips from the temporary cwm once itl oads.
im still using stock 2.3.6 that came with the phone, would i need to install another firmware before hand?
and could i have some help finding an older version of CWM? weird thing is i rooted my phone but CWM is still not onstalled. ive reset my phone a lot, installed a few XXLD8 with CWM, tried to onstall standalone CWMs but none of them seem to work (failed to verofy whole package thing), tried via rom manager and it gives me the 'failed to verify whole package' thing.l
i even read a tutorial on that but its still not getting me through it
do i need CWM installed before i can upgrade using aroma/odin? can i use TWRP instead of CWM?
1. Follow this http://forum.xda-developers.com/showthread.php?p=43001497
2. Get temp CWM 6 (by Shaaan) then copy to external sdcard.
3. Reboot to recovery(you will be in stock) and chose third option from top (the line has an 'update'in it)
Find the temp CWM (will be named update.zip) and flash.
3. Make sure minimal zero file in in external/internal sd then chose flash zip from sdcard in temp CWM. And follow instructions in judas77's thread
EDIT: in 2: use power button to select
Sent from my GT-I8160 using xda app-developers app
temp CWM is working
what are the requirements for minimal/zero? im following the 'all galaxy ace 2 jelly bean firmwares' and the newest reply i saw was a person who downloaded an MF2 but requiring an MF1. seeing how zero has an MG1 CSC version and mininal has an MG2 does that mean zero is a requirement of minimal or are they both standalones? i also read elsewhere that in order to install an MG youd have ti install earlier firmwares, is that true?
sorry for such noobish questions
You can flash MB4 then MG2 to ensure 624mb ram, if you flash mg2 only most like get only 482mb ram. Follow guide to get 624mb ram on any jb rom if you have only 482mb ram after flashing your desired fw.(mc8,mg2 etc). Minimal 1.6 and minimal zero are standalone roms.
EDIT: CSC does not really matter unless you want to update through kies (what for? Use odin) and you dont need to flash another firmware just for mg2.
Sent from my GT-I8160 using xda app-developers app
thanks for the replies, theyre helping a lot
theoretically if i wanted to skip downloading other firmwares, what files for the MG2 would i have to install manually? even without a complete MG2 i could still get in to download/recovery to install them? ive so far found kernels and the 628MB (from szabys signature), would those be enough?
if i wanted to go down this road that means installing the OS first then the others right, will the order count?
*edit*
about the different CSC versions, i thought other settings would be affected as well, so its just update over kies right
Just find any fw you like (i use mg2, but may not be best either, your choice ) then flash with odin under PDA(remember to extract the .zip to obtain the .md5) different csc dont seem to do any harm for me and i dont think it should
EDIT: you must wait for the whole flashing process in odin to finish(although i have no idea what happens if you dont). Once its booted you can just head to recovery and update to temp CWM then follow instructions to flash minimal
Sent from my GT-I8160 using xda app-developers app
thanks for all the help, im not blaming you since my stupidity did it -.-
ATM i 2/3 bricked it (only download mode)
hoping the staffll keep this open since im on a side questish
If you can access download mode flash md5 again
You can ask in Q & A(new) i go there sometimes, if i can help i will
Sent from my GT-I8160 using xda app-developers app
thanks again, im currently torrenting the MG2 from szabys sig, will try flashing via odin once its done
heres the thread if youre interested http://forum.xda-developers.com/showthread.php?t=2441429
update
i feel like an ass asking how do i use this and that, but in the end i ended up flashing it to stock MG2, hope theres no hard feelings
Nope. Glad your phone works well . Just ask in Q & A next time
EDIT: but you would probably wanna learn how to flash cm10/ 4.2 roms. Stock jb is so hopelessly slow you could downgrade to gb
Sent from my GT-I8160 using xda app-developers app
again thanks for the tip, id probably try CM10.1 B2 i found on bagnzors site (full download thing ~200MB), seeing how i rarely use the things he said arent fixed yet id just jump right in
im currently using zero, do i have to reflash MG2 first or can i install it on top of zero?
littledude072 said:
again thanks for the tip, id probably try CM10.1 B2 i found on bagnzors site (full download thing ~200MB), seeing how i rarely use the things he said arent fixed yet id just jump right in
im currently using zero, do i have to reflash MG2 first or can i install it on top of zero?
Click to expand...
Click to collapse
flashing on top works fine
dont know why i waited almost a year to root but honestly CM10.1 handles like GB (both using under 200MB, whereas 412/zero uses 300, all debloated)
but there are 2 problems i cant solve, it turns on when charging and 'package access helper/fused location' always running, other than those awesome mod