I got a little case-crazy after I pre-ordered my white SGS3, and bought a total of 6 cases (for $35 total): 3 different brands of TPU cases, and 1 hard polycarb "Rock Quicksand" case.
I just wanted to post a quick comparison of the TPU cases here, in case it might help someone.
The cases:
Cruzerlite ($10 on Amazon) -- PROS: The most "well made" case of the bunch; sold by a nice guy in the USA; button holes are cut out rather than covered; Andy is on the back! CONS: it's the least grippy out of the three
S-Line ($2 on Ebay) -- PROS: The diamond/sawtooth pattern on the sides is nice and grippy; CONS: there's a hole on the bottom-right back for something (a lanyard?) that I'll never use and will just let dirt in and cause it to not lay flat; the case is also way "too common".
X-Line ($3 on Ebay) -- PROS: It's slightly (~33%) thinner than the other two, and the grippiest of the bunch overall. CONS: It's solid black (I wasn't able to find translucent gray versions of the X-Line on ebay, so I got black for some variation, but don't like it much. Clear is also available); also too common (if you care)
In the photos below the order is Cruzerlite (smoke), S-line (grey), X-line (black), from left to right and from top to bottom:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In the end, I think I'll be using the translucent android green Cruzerlite case (not pictured) day to day, and the Rock Quicksand for "special occasions".
How long did it take for the cases to get to you from china?
Mherder said:
How long did it take for the cases to get to you from china?
Click to expand...
Click to collapse
9 days (to NY)
Sent from my SGH-I897 using XDA
I ordered three of the Chinese eBay cases for my SIII.
One shipped from California. The other two from China and took two weeks to arrive.
The California one was such a piece of crap that I haven't even tried it yet.
The other two didn't even fit the freaking phone.
Three cases and all three went in the trash can.
Only about $25 down the drain but it adds up.
i have a cruzerlite sitting on my desk right now. it's awesome! was shipped on mon and i got it yesterday.
ScottyBrown said:
Thank you for the review, zmore! We certainly appreciate it... also, we'll look into other patterns to use for the grips. Currently we are developing additional styles of cases, stay tuned for more info.
If anyone is interested in ordering CruzerLite cases, you can use coupon code XDA at checkout to save 10% off of your order... and we're always running our buy 2 get 1 free promo (use code B2G1).
Thanks again for the review... take care!
--Scotty Brown
--Corporate Director of Marketing; CruzerLite
Click to expand...
Click to collapse
Wow, thanks! A slight design change for added grip would be most welcome.
ScottyBrown said:
Thank you for the review, zmore! We certainly appreciate it... also, we'll look into other patterns to use for the grips. Currently we are developing additional styles of cases, stay tuned for more info.
If anyone is interested in ordering CruzerLite cases, you can use coupon code XDA at checkout to save 10% off of your order... and we're always running our buy 2 get 1 free promo (use code B2G1).
Thanks again for the review... take care!
--Scotty Brown
--Corporate Director of Marketing; CruzerLite
Click to expand...
Click to collapse
wish i'd known about that coupon code before
also, i actually like that it's not extremely grippy. it feels great in hand except i have no phone to put in it yet lol
My S line just got here, but mine has the covering over the buttons.... unlike yours. It fits pretty well but the buttons are kinda hard to press now. Not really happy with it.
Cruzerlite TPU is a good case. I had it for the Galaxy Nexus. The only problem I have is that the clear TPU will turn yellow tint after two months. I just noticed it.
ScottyBrown said:
Thank you for the review, zmore! We certainly appreciate it... also, we'll look into other patterns to use for the grips. Currently we are developing additional styles of cases, stay tuned for more info.
If anyone is interested in ordering CruzerLite cases, you can use coupon code XDA at checkout to save 10% off of your order... and we're always running our buy 2 get 1 free promo (use code B2G1).
Thanks again for the review... take care!
--Scotty Brown
--Corporate Director of Marketing; CruzerLite
Click to expand...
Click to collapse
Mr Brown, when did you expect the persona cases in?
Sent from my SGH-I777 using xda premium
ScottyBrown said:
For which, the SGSIII? If so, they will all be shipping July 1st. Customs sucks.
Click to expand...
Click to collapse
Thanks. Those cases are awesome and can't wait to get one.
ScottyBrown said:
Thank you for the review, zmore! We certainly appreciate it... also, we'll look into other patterns to use for the grips. Currently we are developing additional styles of cases, stay tuned for more info.
If anyone is interested in ordering CruzerLite cases, you can use coupon code XDA at checkout to save 10% off of your order... and we're always running our buy 2 get 1 free promo (use code B2G1).
Thanks again for the review... take care!
--Scotty Brown
--Corporate Director of Marketing; CruzerLite
Click to expand...
Click to collapse
Scotty Brown,
have you heard of the any customer getting yellow tint on the clear TPU? I got the clear one for the galaxy nexus like 2-3 months ago, but now it has a yellow/tea tint to it. Not sure if the clear TPU just oxidize or what, but it doesn't stay clear.
My x-line seems to be a little too loose fitting around the phone. Anyone else with that problem?
laxattackdog said:
My x-line seems to be a little too loose fitting around the phone. Anyone else with that problem?
Click to expand...
Click to collapse
My S-line is a little bit loose, not to much... the buttons are IMPOSSIBLE to press though.
ScottyBrown said:
Sometimes the cases will pick up tints from clothing and such (like a blue tint from being in a pocket of jeans). I'll PM you
Click to expand...
Click to collapse
Thanks Scotty. I sent over some pics.
Scotty, I just got my Cruzerlite Androidified cases and when I put the translucent teal one on my white phone i get these dark blobs where the case is sticking to the back. Do you know of anything to do to keep these blobs from occurring?
rbj13 said:
Scotty, I just got my Cruzerlite Androidified cases and when I put the translucent teal one on my white phone i get these dark blobs where the case is sticking to the back. Do you know of anything to do to keep these blobs from occurring?
Click to expand...
Click to collapse
The material that the SGSIII is made of is very finicky stuff. Ideally, the whole phone would stick to the back, as the case fits extremely tight on these devices. Also, they take a bit of work to get them positioned just right... I'd suggest trying to work the case a bit until it's perfect and the phone is making full contact with the TPU.
Good luck!
im gonna order one today, dropped my brand new white one already
few questions
should i get the white or clear for my white phone?
also do u know of any screen protectors that will work with ur cover? thanx!
i went ahead and ordered a white one anyway lol
I ordered a white one and a translucent teal one. I really like the look of the translucent teal on the white board phone. Also B2G1 is a good code to use to get a free case. As for screen protector I got one coming in the mail so I'm not sure yet.
Sent from my SAMSUNG-SGH-I747 using xda premium
Related
Recently picked up two different Cruzer Lite Argyle Pattern TPU cases...here's what I think:
This applies to both the Clear Argyle & Smoke Argyle Cases.
Please note, I'm NOT affiliated with the maker of these cases...just LOVE a good TPU Case!
1. It fits perfectly- nice and snug. Cutouts are just right. Easy to put on / take off. No "give" doesn't feel like it'll get loose on ya.
2. The volume buttons covered with two overlays, defining the buttons nicely. A little stiff at first, but seems to be softening a little over a few days.
3. Not overly slick. Easy to put in your pocket / remove. Seems to have enough friction to prevent dropping. Some of these TPU cases are like holding a wet fish, while your hands are covered in baby oil. This one's just fine.
4. Lightweight - doesn't add any real bulk...most TPU cases don't. Having such a slim, lightweight phone is something to show off...this doesn't detract from that.
5. Great packaging - most of these type of TPU cases just come shipped to you in a plastic baggie. This had said plastic baggie, with another layer of protection inside that...plus a cardboard cutout. (it's the little things that impress)
6. I love that the SGSII logo can be seen through the argyle pattern. This and the darker of the two cases allow for this. I like it!
7. The argyle pattern itself is sharp...I feel it adds to the classy image of this phone.
I'll say in summation, that I've had an overall pleasant experience with this TPU case...and the Owner that sent it to me. Seems like decent Customer Service in my interactions. Of course, in all honesty a TPU case doesn't offer as much protection as an OtterBox...but overall it serves it's purpose!
GET ONE HERE!!
Cruzer Lite Facebook
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I like this case too. I posted a few pictures in another thread.
I didn't like how the volume rocker cover felt so I ended up using the cardboard mod that other people were using with the other TPU cases. I might consider removing that mod because I'm afraid it might damage the buttons in the long run.
I really like these as well. Looks like the smoke argyles are sold out at amazon and I cant find them on ebay. anyone know where these are in stock right now?
They will be stock in about a week. I will have nine colors total.
joelmic said:
They will be stock in about a week. I will have nine colors total.
Click to expand...
Click to collapse
Thanks for pokin yer head in!
Looking good. thanks for the pics.
leyvatron said:
Looking good. thanks for the pics.
Click to expand...
Click to collapse
Anytime Leyvatron!
bigkmoney said:
I really like these as well. Looks like the smoke argyles are sold out at amazon and I cant find them on ebay. anyone know where these are in stock right now?
Click to expand...
Click to collapse
You can get it from here. They are on fommy.
http://www.fommy.com/view-full-page...el=Samsung+Epic+4G+Touch+SPH-D710&skuno=92292
Use coupon code "fommycall10" and get a dollar off. Got mine for $13
I picked up the smoke and clear.
I love the cases, but the volume buttons are really tough. Def. need to do the piece of thick paper hack to them
received clear argyle case thanks bandage! Will post pics up soon.
This case is back in stock plus 7 other colors
I just got a clear one and a blue one from eBay. 4.99 each and free shipping. There were on my phone in 2 days. My volume buttons are easy to click. Somewhat easier than no case. It gives it more of a clicky feel. ( if that's a word?)
Sent from my SPH-D710 using XDA App
mobeast17 said:
I just got a clear one and a blue one from eBay. 4.99 each and free shipping. There were on my phone in 2 days. My volume buttons are easy to click. Somewhat easier than no case. It gives it more of a clicky feel. ( if that's a word?)
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Cruzer lite does not sell its cases on ebay, Not sure what brand you got.
joelmic said:
Cruzer lite does not sell its cases on ebay, Not sure what brand you got.
Click to expand...
Click to collapse
Oh. I'm not sure. But it looks exactly like the one in the OP.
Sent from my SPH-D710 using XDA App
mobeast17 said:
Oh. I'm not sure. But it looks exactly like the one in the OP.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
no worries, I was just trying to state that Cruzer Lite only selling there cases on Amazon and our own website
My case is in the mail today. Currently I have a silicone skin, these are horrible imo, difficult to put in and out of my pocket as well an eyesore. Cannot wait til this arrives!
g4me0v3r said:
My case is in the mail today. Currently I have a silicone skin, these are horrible imo, difficult to put in and out of my pocket as well an eyesore. Cannot wait til this arrives!
Click to expand...
Click to collapse
What color did you get?
Ordered the clear argyle case, just arrived today. The case fits like a glove, the only thing is that the argyle design is scratched and faded around the corners. Maybe I'm just being finicky. But I can't really argue with the price. Leaps and bounds better than the silicon case I had, oh and it's lighter too.
The way the cases are molded sometimes small defects can be found on the corners. I am glad to hear you like the case.
Other than those minor problems, I love this case. The case seems good enough to give me peace of mind while handling my phone.
Did anybody already find it like the one for the Galaxy S II?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com.au/itm/3-HARD-C...AU_MobilePhoneAccessories&hash=item20c040aab8 you mean something like these?
dunno about the s2 models, but the pictures for the galaxy note looks like it doesnt provide enough corner protection. when you drop a phone, its 90% likely to land on a corner first, so corner protection is important.
http://www.ebay.com.au/itm/Black-Bu...ccessories&hash=item1c21f6f076#ht_3395wt_1163 this is the case i kinda wanted but then my OCD kicked in about the missing two bubbles on the bottom row, so i stopped myself >.<
Souai
[url said:
http://www.ebay.com.au/itm/Black-Bubble-Slider-Shell-Hard-Case-Samsung-Galaxy-Note-i9220-N7000-/120828915830?pt=AU_MobilePhoneAccessories&hash=item1c21f6f076#ht_3395wt_1163[/url] this is the case i kinda wanted but then my OCD kicked in about the missing two bubbles on the bottom row, so i stopped myself >.<
Click to expand...
Click to collapse
I have ordered one of these a few days ago....hope I can get it soon and see how good it is
Hi DMax.
please please put up pics and a review as soon as u get! loved this case, very different! just wondering how thick its getting and how its fit and finish. I hope the back is like an anti-slip material.
Souai said:
http://www.ebay.com.au/itm/3-HARD-C...AU_MobilePhoneAccessories&hash=item20c040aab8 you mean something like these?
Click to expand...
Click to collapse
Exactly what I was talking about.
Apart from not having a 'Galaxy Note' label it takes forever to arrive to Italy.
Did anybody see something similar in Europe?
Insane Devil said:
Hi DMax.
please please put up pics and a review as soon as u get! loved this case, very different! just wondering how thick its getting and how its fit and finish. I hope the back is like an anti-slip material.
Click to expand...
Click to collapse
sure, will do.
I got the black mesh yesterday. I really like it. Looks good, feels good. Adds about 2mm to total width. I think it covers corners well enough to protect Pretty well, but it does leave the top and bottom and half of each corner exposed. Sure does squelch the accidental hitting of volume and power buttons, which was a major goal. Fits fine into PU "leather" belt case I got.
Sent from my GT-N7000 using xda premium
OK it looks like it's available now in Europe too.
http://www.ebay.co.uk/sch/i.html?LH...1&_ipg=200&_sop=15&_trksid=p3286.c0.m14.l1514
Insane Devil said:
Hi DMax.
please please put up pics and a review as soon as u get! loved this case, very different! just wondering how thick its getting and how its fit and finish. I hope the back is like an anti-slip material.
Click to expand...
Click to collapse
To my surprise, the bubble case has arrived today...very fast postage, only took about a week
Anyways....here are some pictures and my thoughts about it, comparing to the Nillkin TPU case.
# The black part of the back of the case is actually of hard plastic material, and the grey sides of the case are of TPU. It kind of remind me of the Commuter Series of Otterbox, but instead of being 2 pieces, it's all in one piece. It does feel cheaper than OtterBox though....well...IT IS...
# It fits the phone really well and covers the edges of the screen a bit better than the Nillkin ones.
# I'm not sure if it is because of the hard plastic at the back...but it is actually quite hard to put the case on without feeling that I might somehow scratch the sides of the phone. But if you don't have a habit of taking the case off frequently, it will not be a problem to you. If you do...then...this will definitely cause you some pain.
# I think the dimensions of this case are a bit wider, longer, and thicker than the Nillkin....but NOT that much.
# The unlock and volume buttons are HARDER to press than the Nillkin case
# The glossy back bubble offers great look and also good grip (surprisingly).
All in all...I am very happy with this case...and personally I prefer this one than the Nillkin because of it's cool looks and the mixed of materials of hard plastic and TPU (somehow I think it might provide better protection).
So, anyways...I hope this helps and also hope to hear others opinions soon...
Feel free to ask me any questions if you have any
Here's pics of the black mesh case.
Sent from my GT-N7000 using xda premium
Hi DMax!
Thanks for the wonderful review!!! i am sold over it now!
Just wanted to ask if it really is anti-slip, as the note is thin and big, its quiet slippery now.
and also if the back is glossy, do you think its so "glossy" that its going to show up scratches real soon???
Thanks mate!
EDIT:
Do you think this is the same one -
http://www.obostore.com/hole-hard-plastic-case-skin-faceplate-for-samsung-galaxy-note-p-3926.html
only for US$3.99 with free shipping!
The ebay seller mentions no shipping to India in his listing
EDIT 2:
Bought the white bubble case from Obostore, what the heck, lets see how good this is!: )
Also ordered the Black Mesh case from an eBay seller for US $4.50. hope the quality n fit is good! last time I had a mesh case for my Galaxy S and the rubber coating started peeling off in a months time!!! had to thrown it away as it started looking ugly!
hi everybody!i received today this one:
http://www.ebay.com.au/itm/Black-S-...AU_MobilePhoneAccessories&hash=item2a1646f046
it's very good,with good protection at the corner and great grip...not i'm not more afraid to lose from my hand the Phone.
Insane Devil said:
Hi DMax!
Thanks for the wonderful review!!! i am sold over it now!
Just wanted to ask if it really is anti-slip, as the note is thin and big, its quiet slippery now.
and also if the back is glossy, do you think its so "glossy" that its going to show up scratches real soon???
Thanks mate!
EDIT:
Do you think this is the same one -
http://www.obostore.com/hole-hard-plastic-case-skin-faceplate-for-samsung-galaxy-note-p-3926.html
only for US$3.99 with free shipping!
The ebay seller mentions no shipping to India in his listing
EDIT 2:
Bought the white bubble case from Obostore, what the heck, lets see how good this is!: )
Also ordered the Black Mesh case from an eBay seller for US $4.50. hope the quality n fit is good! last time I had a mesh case for my Galaxy S and the rubber coating started peeling off in a months time!!! had to thrown it away as it started looking ugly!
Click to expand...
Click to collapse
Yeah, its quite grippy....nit sure about scratches....
Wow...3.99 is a very good price...i git mine 9.99 from eBay....im pretty sure they are the same
yep mate, sure sounds a great deal.. as the ebay seller wasn't shipping to India, I started searching other sites for thi, and found it at obostore. I have bought stuff from them before, and they are good.
Will upload pics after I get it. Ordered white here so that if quality isnt good, then can order black from the ebay guy if he agrees to ship here.
I've never heard of this brand before but I heard lots of good reviews on TPU cases and need something to put my GS3 in when I get it. Was looking to stay away from black but when I seen this picture not only did it convince me to go ahead and get it, but i'm gonna end up getting a black Otterbox as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This was just $4.95 shipped
Anyone had any experience with this brands TPU cases before? I will update this thread with my review once I get it installed.
**Update 6.29.12**
I picked up my phone from BB yesterday and took this case with me to protect my phone until my Incipio Sylicrilic Dual Pro arrived...which was at home waiting for me along with my Tagsfordroid NFC tags. The case had a nice feel to it, at least on the shiny parts where it had more grip...the matte area was pretty slick/smooth/slippery. It was my first experience with a TPU case and while it added very little bulk, much like a wetsuit, it was a little difficult to stretch onto the phone. I thought I was going to damage the phone trying to get it on. But after getting it on I liked it for it's intended use, preventing cosmetic damage to the backside of the case and allowing me to set the phone face down without feat of damaging the screen. But my big complaint is that the buttons are very hard to press and you can't even tell when you've done so as you have no audible or tactile feedback upon the press. Because of this, the TPU came off as soon as I got home and noticed my SDP had arrived. I do not recommend this case unless it's just going to be used similarly to the situation I used it for.
generic cases you can get them for a buck on ebay with shipping. have used them on a lg o2x, sgs2, HOX and later today a sgs3. they usually fit really good. had no issues with them.
providing a link to the first case i found on ebay http://www.ebay.com/itm/1-5-Colors-...ain_0&var=&hash=item4166b8b83e#ht_4044wt_1018
I've ordered one for every phone I've had this past year they are super thin and have a good grip on the sides
But the white ones get super dirty really fast
916x10 said:
I've never heard of this brand before but I heard lots of good reviews on TPU cases and need something to put my GS3 in when I get it. Was looking to stay away from black but when I seen this picture not only did it convince me to go ahead and get it, but i'm gonna end up getting a black Otterbox as well.
This was just $4.95 shipped
Anyone had any experience with this brands TPU cases before? I will update this thread with my review once I get it installed.
Click to expand...
Click to collapse
Where did u order from?
Sent from my GT-I9300
Hampa_D said:
generic cases you can get them for a buck on ebay with shipping. have used them on a lg o2x, sgs2, HOX and later today a sgs3. they usually fit really good. had no issues with them.
providing a link to the first case i found on ebay http://www.ebay.com/itm/1-5-Colors-...ain_0&var=&hash=item4166b8b83e#ht_4044wt_1018
Click to expand...
Click to collapse
The black one costs $2 and ships out of Hong Kong and takes anywhere from 7-25business days to arrive....no thanks.
jpitch2415 said:
I've ordered one for every phone I've had this past year they are super thin and have a good grip on the sides
But the white ones get super dirty really fast
Click to expand...
Click to collapse
Nice, thanks for the feedback.
ronj1986 said:
Where did u order from?
Click to expand...
Click to collapse
Amazon
I bought one on eBay for 4.59 shipped. I bought clear, but other colors are on ebay as well. http://www.ebay.com/itm/290721298653 Haven't received it yet.. Here is a seller from Ireland with a variety of colors. I might just pick up a blue one.. http://www.ebay.com/itm/FOR-SAMSUNG-GALAXY-S3-I9300-HARD-GEL-CASE-COVER-FREE-SCREEN-PROTECTOR-/290720955624?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item43b051bce8
I have the white version on the white galaxy s3 and it looks really good.
Now obviously there are other cases that look better, but none for a couple of euro/dollars/pounds or what have you.
Thor said:
I have the white version on the white galaxy s3 and it looks really good.
Now obviously there are other cases that look better, but none for a couple of euro/dollars/pounds or what have you.
Click to expand...
Click to collapse
How does it feel in your hand? Does it add alot of bulk? What's the fitment like? Does it attract dust/lint? Does it add any grip? Have you dropped it at all, if so, did it fare well?
via Atrix 2/VictoryROM/XDA app
I love these types of cases. I have had one for every phone I have had over the past year and a half(and I've had a bunch) Case doesnt add too much bulk at all and it feels great in the hand. The side grips are very nice
Don't these fall off easily?
Sent from my Samsung Epic 4G Touch
916x10 said:
I've never heard of this brand before but I heard lots of good reviews on TPU cases and need something to put my GS3 in when I get it. Was looking to stay away from black but when I seen this picture not only did it convince me to go ahead and get it, but i'm gonna end up getting a black Otterbox as well.
This was just $4.95 shipped
Anyone had any experience with this brands TPU cases before? I will update this thread with my review once I get it installed.
Click to expand...
Click to collapse
I just bought a couple of TPU case for my S3 as they are my favorite type of case. I have the ones on eBay that have a slightly textured X pattern on the back and a couple identical to the flexishield case on mobilefun. I've found the ones on eBay to be to loose and move around a bit when I'm adjusting the volume or locking/unlocking my phone ect and both of them have a problem with reflecting the color of the case back into the camera lens when using the flash.It makes for some pretty interesting photo effects.
The ones you linked to look good but I would advise against getting a semi transparent color. I'm thinking about getting one in black or white to see me through until Incipio release there NGP case.
Okay, I forgot the mention this before when I posted the images.
While they feel great and look really good.
I noticed NFC doesn't work with cover on, I think this might be the same for most covers and not just this one, but none the less if you use NFC a lot. Keep in mind you need to remove the cover to do so.
wizky911 said:
Don't these fall off easily?
Sent from my Samsung Epic 4G Touch
Click to expand...
Click to collapse
TPU cases typically don't fall off. You have to pop them off. They're pretty ideal.
Big Phoney said:
I just bought a couple of TPU case for my S3 as they are my favorite type of case. I have the ones on eBay that have a slightly textured X pattern on the back and a couple identical to the flexishield case on mobilefun. I've found the ones on eBay to be to loose and move around a bit when I'm adjusting the volume or locking/unlocking my phone ect and both of them have a problem with reflecting the color of the case back into the camera lens when using the flash.It makes for some pretty interesting photo effects.
The ones you linked to look good but I would advise against getting a semi transparent color. I'm thinking about getting one in black or white to see me through until Incipio release there NGP case.
Click to expand...
Click to collapse
Thanks. Good info
Thor said:
I noticed NFC doesn't work with cover on, I think this might be the same for most covers and not just this one, but none the less if you use NFC a lot. Keep in mind you need to remove the cover to do so.
Click to expand...
Click to collapse
Ah, thanks for the heads up.
via Atrix 2/VictoryROM/XDA app
Got my case today, super fast if you ask me considering I placed my order at 11pm on the 6th. Will definitely do business again with these guys. I bought it on Amazon from "SF Planet", they're out of Minnesota and I live in California.
So I checked out the case and the first thing I noticed is how thin it is, will add very little bulk to the phone. It's thick enough to hold it's form but thin enough to be very low profile. The case has shiny and dull areas on it....the shiny areas are very grippy, the dull areas not so much. But since the edges where you would normally hold the phone are knurled and shiny, gripping it should not be a problem. It's also got cutouts for the necessary areas, including both top and bottom mic's. Can't speak on the fitment for obvious reasons but will do so hopefully soon.
So far, so good.
People that buy this case in white, it gets very dirty! Only the left half of the wave design since it's a different surface. (matte vs. gloss).
Do TPU cases provide enough front coverage?
It seems like the Commuter would do better.
if your in london you can buy it from these guys... i bought a case for my SGS1 Year and a bit ago and they were really good than http://www.londonmagicstore.co.uk/Samsung/I9300/S+Line.htm
LLStarks said:
Do TPU cases provide enough front coverage?
It seems like the Commuter would do better.
Click to expand...
Click to collapse
It certainly would, but considering the commuter wont be shipping until the week after launch I had no choice but to get something. TPU cases will guard against scratches, thats about it.
Sent from my MB865 using XDA App
OP updated with my review
Hi all,
I've been a lurker for many years here on XDA and figured I'd try and contribute for once. Sorry if someone has posted a review on this case in the other threads. I looked around for a bit but didn't find any.
I received my Speck GemShell for my HTC One http://www.speckproducts.com/smartphone-cases/htc/gemshell-for-htc-one.html about 3 days ago. It's a hard plastic case with gel incorporated around it. BTW, for those considering shipping options, mine shipped out from Oklahoma so it reached me in Chicago in a day via the free shipping option (USPS). That being said, here are my impressions so far:
Pros:
- The case still leaves the phones feeling pretty slim (though I still do prefer it nekkid).
- It's clear except for a gel around the front rim, corners, and inputs.
- The gel around the front rim elevates the phone when placing it on its face.
- The gel around the inputs will hopefully prevent wearing/cracking of the hard plastic.
- Seems well sealed enough that I haven't seen any dust or pocket enter the space between the case and phone.
- The speck logo on the back is really well done. It makes it seem like it's a part of the aluminum.
Cons:
- The power button becomes really recessed. Not a deal breaker for me but definitely something to take note of.
- Interacting with the volume buttons requires more effort.
- I'm OCD on keeping fingerprints off my phone/case and the cleaning has left micro-scratches on the case. So far it doesn't interfere with the appearance but we'll see after a longer period of time.- Wish the gel actually covered the entire sides, top, and bottom for better coverage. Even with the clear plastic, you don't really see the aluminum on the sides, top, and bottom.
So you can see the selling point of this phone is not only that it's a clear case but the gel that they've incorporated into it. I'm a bit sad on the micro-scratches but I'm not convinced there's any other case-based solution that would be cost effective. I've attached pictures of the case below.
Hope this mini-review helps!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is how reviews should be. Well done!
Red5 said:
This is how reviews should be. Well done!
Click to expand...
Click to collapse
Shame the case looks crap doe.
Great review, not too long, not too short, good display angles, thank you!
compact_bijou said:
Shame the case looks crap doe.
Click to expand...
Click to collapse
How does the case look any different then any other clear case? zzzz
Just canceled my Spigen and ordered this!
PapaRhino said:
Great review, not too long, not too short, good display angles, thank you!
How does the case look any different then any other clear case? zzzz
Click to expand...
Click to collapse
Thick, will turn yellow after a couple of weeks unlike other hard clear cases (such as the Spigen) and it's not very clear. Its very visible on the phone and defeats the purpose of it being clear.
and cturetar
It's good to look. Maybe i will have one.:fingers-crossed::fingers-crossed:
compact_bijou said:
Shame the case looks crap doe.
Click to expand...
Click to collapse
thats your opinion doe
PillPoppin said:
You sir know your cases. I definitely agree here. It may be "grippy" but this will yellow immediately... for clear cases you have to go with a hard case
Click to expand...
Click to collapse
And it'll crack at the stress points. Dirt ingress. Real slick.
CheesyNutz said:
thats your opinion doe
Click to expand...
Click to collapse
And you know what they say about opinions.
I just got this case in the mail over the weekend (still waiting on phone) and The case feels rather flimsy on its own and is incredibly thin. I have no doubt it'll protect against scratches, but feels like it'll do nothing for drops. I didn't expect Otterbox protection, but was hoping for some kind of impact absorption. Anyone have any experience with these cases and drops with previous devices?
Actually I went into the Sprint store on Thursday the 18th & purchased the white & silver speck case cor my HTC ONE that I was receiving in the mail the next day on the 19th & liked my case on it because it matches tne phone perfectly & fits it really tight like a body glove. It's hard to put on & hard to take off but I saw the clear gel case by speck o line yesterday morning & wanted that one because it will show my phone all the way around, I just dont want it to loosen up over time but this one I do have by speck is a hard shell case on the outside but a softgray rubber on the inside
Sent from my GT-N8013 using xda premium
I have ordered the black one but it is still in post. Can someone tell me whether it adds any bulk to the phone? I bought a cheap one from ebay till my speck arrived and im completely satisfied with my cheap one and i hope speck is not bulky.
Sent from my HTC One using Tapatalk 2
mareen77 said:
I have ordered the black one but it is still in post. Can someone tell me whether it adds any bulk to the phone? I bought a cheap one from ebay till my speck arrived and im completely satisfied with my cheap one and i hope speck is not bulky.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I was completely surprised at how thin the speck is. It's hardly noticeable.
Toaster Strudels said:
Thick, will turn yellow after a couple of weeks unlike other hard clear cases (such as the Spigen) and it's not very clear. Its very visible on the phone and defeats the purpose of it being clear.
Click to expand...
Click to collapse
I've had mine for two weeks and it's VERY yellow. I'll post pics when I can. I've had other clear cases before, hard and soft, but never had them turn yellow like this one.
oophlamer said:
I've had mine for two weeks and it's VERY yellow. I'll post pics when I can. I've had other clear cases before, hard and soft, but never had them turn yellow like this one.
Click to expand...
Click to collapse
Lolzzzz
Sent from my Nexus 4 using Tapatalk 4 Beta
I'm not sure of anyone has mentioned as o didn't read entire post. Leet414 u may try that compound they sell for headlight lenses to get scratches out. May be a stretch but that stuff works.
Sent from my Nokia Lumia 810 using XDA Windows Phone 8 App
mareen77 said:
I have ordered the black one but it is still in post. Can someone tell me whether it adds any bulk to the phone? I bought a cheap one from ebay till my speck arrived and im completely satisfied with my cheap one and i hope speck is not bulky.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
It's pretty thin
Was anyone else able to purchase a Nexus 5 bumper case? When I ordered my phone from the play store all of the cases EXCEPT the gray bumper said "coming soon". I assumed it was a glitch on googles website so I purchased the gray bumper to see what would happen (expected a "sorry this is backordered email").
But! Sure enough I just received my shipping confirmation email for both the phone and bumper case. Am I the only one? Just curious if this happened for anyone else?
How are you able to purchase the bumper when it says coming soon? How did you add to cart?
Sent from my HTC One XL using xda app-developers app
I find it odd that they're calling it a "bumper" case - I went to check it out because I hadn't already and it's a full body minus the display cover, when the concept of a "bumper" case means it's just "a big rubber band" of sorts that covers the edges of the phone.
I see it, I find it interesting in a way I suppose, but for $35 I'd spend my money on one of those Spigen Slim Armor cases myself - their Neo Hybrid one is pretty nice as well and still cheaper than the bumper from Google.
It's amazing just how much money these companies are making from these cases nowadays... few cents worth of raw materials, some CAD work to design 'em, few bucks for fabrication and packaging costs, wham bam profits man!
Also: that "red" one ain't red, that's orange... weird.
ethantarheels123 said:
How are you able to purchase the bumper when it says coming soon? How did you add to cart?
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
When I first went to the page. The gray one said "in stock - ships in 1/2 days". I assumed it was a hiccup since the other colors said "coming soon". But I purchased it anyways... And I just received my shipping info for both the case and phone... Weirrrrd. I feel like I'm the only one? Hah
Sent from my Nexus 4 using XDA Premium 4 mobile app
br0adband said:
I find it odd that they're calling it a "bumper" case - I went to check it out because I hadn't already and it's a full body minus the display cover, when the concept of a "bumper" case means it's just "a big rubber band" of sorts that covers the edges of the phone.
I see it, I find it interesting in a way I suppose, but for $35 I'd spend my money on one of those Spigen Slim Armor cases myself - their Neo Hybrid one is pretty nice as well and still cheaper than the bumper from Google.
It's amazing just how much money these companies are making from these cases nowadays... few cents worth of raw materials, some CAD work to design 'em, few bucks for fabrication and packaging costs, wham bam profits man!
Also: that "red" one ain't red, that's orange... weird.
Click to expand...
Click to collapse
The bumper case is actually a hybrid case with a hard shell on the outside. I think they call it a "bumper" because the back is plastic and the edges are rubber inside... Either way I'm hoping its quality. I guess we'll see when it arrives Tuesday with the phone.
Sent from my Nexus 4 using XDA Premium 4 mobile app
So basically it's a copycat of something from Diztronic like this:
http://tpu-cases.com/index.php?main_page=product_info&cPath=46_99&products_id=368
$35 for the Google bumper or... $10 (or less on Amazon) for the Diztronic, I wonder, I wonder. I could understand and deal with $19.99 for the Google one, but $35? Man, they must be learning from Apple nowadays or something.
I ordered one of these a few days ago, should be here on Tuesday:
http://www.amazon.com/SUPCASE-Google-Unicorn-Premium-Protective/dp/B00FN13EJK
Had one for my Galaxy S4 Active and loved it, it's such an awesome case, perfect tight fit, not loose anywhere at all. And it's a hard plastic shell (the yellow portion) merged with the TPU material (dark grey).
br0adband said:
So basically it's a copycat of something from Diztronic like this:
http://tpu-cases.com/index.php?main_page=product_info&cPath=46_99&products_id=368
$35 for the Google bumper or... $10 (or less on Amazon) for the Diztronic, I wonder, I wonder. I could understand and deal with $19.99 for the Google one, but $35? Man, they must be learning from Apple nowadays or something.
Click to expand...
Click to collapse
That appears to be a plain old TPU case... I have a diztronic tpu case for my N4. Googles bumper is hard plastic and rubber. A bit different. Doesn't justify the price... You definitely pay for the brand "Google". But hey... I'm a fanboy. I was just curious who was able to purchase one.
Sent from my Nexus 4 using XDA Premium 4 mobile app
dills84 said:
Was anyone else able to purchase a Nexus 5 bumper case? When I ordered my phone from the play store all of the cases EXCEPT the gray bumper said "coming soon". I assumed it was a glitch on googles website so I purchased the gray bumper to see what would happen (expected a "sorry this is backordered email").
But! Sure enough I just received my shipping confirmation email for both the phone and bumper case. Am I the only one? Just curious if this happened for anyone else?
Click to expand...
Click to collapse
I was able to get one as well. Both items shipped and have separate tracking numbers.
CruzECO13 said:
I was able to get one as well. Both items shipped and have separate tracking numbers.
Click to expand...
Click to collapse
I was also able to order one as well. Shipped out at the same time as my Nexus 5.
I managed to order at 11:06pst, but then saw the bumper was available. So I ordered again at 11:13am with the bumper to save on shipping.
I also got the gray case, it shipped at the same time as the phone but with a separate tracking number. I know it's expensive but the LG bumper for the Nexus 4 was so sweet and kept my N4 in perfect condition through much abuse. So if this one is as good, it's worth it in my opinion
CruzECO13 said:
I was able to get one as well. Both items shipped and have separate tracking numbers.
Click to expand...
Click to collapse
Same tracking number for me.
If I'm ordering an accessory without any reviews it will be a first party accessory.
Both should be here Tuesday or Wednesday. My new micro sim from StraightTalk won't be here until Tuesday so I'm not in a huge rush.
I tried and it was greyed out darn it. I'll buy one from someone if they don't like it
Sent from my SAMSUNG-SM-N900A using Tapatalk
Looking foward to some more reviews. AC has the first one up:
http://www.androidcentral.com/nexus-5-bumper-case
hmm from looking at the AC images... kind of wish I'd waited for the black one, instead of getting the gray one. oh well, looks pretty sturdy and protective
I don't know why they aren't released yet. However, I will get the black one when I can. Yes it is a lot but I'm also a Google fanboy lmao
I wish they made a true bumper like they did for the nexus 4. It was such a great fit and made with quality, that will be hard to find in 3rd party cases.
My N5 and gray bumper showed up today. The bumper is great! the back is hard plastic and the sides are soft rubber... hence the name "bumper" im assuming.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dills84 said:
My N5 and gray bumper showed up today. The bumper is great! the back is hard plastic and the sides are soft rubber... hence the name "bumper" im assuming.
Click to expand...
Click to collapse
any chance you can take some pics of it on the device?
tigercranestyle said:
mine came today also. though the case has grown on me, it does add some bulk. the back does not taper to the curves of the nexus. has a very slight trapeziodial-like shape. it seems that google was going for a simple block look. seems that it will protect from falls. buttons don't have the feedback that i look for though they're easy to press.
edit: the case is a snug fit and does had some grip that's missing from the panda nex.
can recommend this case.
Click to expand...
Click to collapse
I'm really loving the case as well. May seem over priced... however it fits really well and the materials feel top quality. headphone hole is a good size, adds a lot of grip. and its nice looking! The gray color almost comes off white... which is actually a pleasant surprise for me.
Heres some pics of the N5 in the Bumper for anyone interested. (not the greatest quality... taken with my Nexus 4)