[TWEAKS][ICS] ICS/CM9 performance tweaks! [UPDATED] - Defy General

************************************************
IF THE LINES ARE NOT ALREADY IN BUILD.PROP, JUST ADD THEM TO THE END OF THE FILE
************************************************
So i found these in the net.
I have applied them in latest Fuzz's build and it is very smooth!!
Here are just a couple of tweaks to smoothen one's UI experience in Android 4.0 Ice Cream Sandwich. (Remember these changes won't apply without a reboot and you will need a rooted device).
Improve UI frame rate and touch response:
Code:
windowsmgr.max_events_per_sec=240
Disable kernel error logging:
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
Get rid of CPU rendering:
1. Navigate to /system/lib/egl/
2. Open the file named "egl.cfg"
3. Delete the first line. It should say "0 0 android" or something similar
4. Go back into the egl folder and delete libGLES_android.so
What this does is remove the entire soft-rendering pathway from the OS.
Enable tile rendering:
Tile rendering is a more efficient form of GPU composition, and boosts performance since each frame is split into tiles.
Code:
debug.enabletr=true
Improve Scrolling FPS:
Code:
ro.max.fling_velocity=6000
Signal Tweaks:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Network Speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
Disable bootanimation for faster boot:
Code:
debug.sf.nobootanimation=1

i have only read permission bt not write...what should i do in this case
and d commands u said are not there in build.prop
i m using cm9 kangs by fuzz

you should use root file browser, e.g Root Explorer, and press mount as r/w on the top right corner.
then long press on build.prop file and select open in text editor
then add the lines to build.prop file, save and reboot

Solid explorer is another root explorer that's free and has an inbuilt text editor
Sent from my MB525

@OP, what were the specific values you used for scrolling fps and UI frame rate on your device

I found another thread on xda a stock/beta thread dealing with xperia and there were a few more tweaks.will post the link when I get to my PC.however that one had the values for deep sleepand performance.so far I am enjoying it.very fast and snappy.no boot loops nothing:thumbup:
Sent from my MB526 using xda premium

hsrars-d said:
you should use root file browser, e.g Root Explorer, and press mount as r/w on the top right corner.
then long press on build.prop file and select open in text editor
then add the lines to build.prop file, save and reboot
Click to expand...
Click to collapse
I just copied the file using drop box edited it on my PC and again synced it with my phone.just used ROM toolbox pro to set permissions
Sent from my MB526 using xda premium

syllogyking said:
@OP, what were the specific values you used for scrolling fps and UI frame rate on your device
Click to expand...
Click to collapse
windowsmgr.max_events_per_sec=240
ro.max.fling_velocity=6000
Sent from my MB525 using xda premium

http://androidforums.com/triumph-all-things-root/495620-build-prop-performance-tweaks-updated-04-14-2012-a.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/474-list-some-build-prop-tweaks.html#post8158

Cleaned OP and added some more stuff

Not working
Tried adding to end of prop file but no effect. Should i leave a space after the last entry i.e.
**********(last entry)
winowdsmgr_****
or
**********(last entry)
windowsmgr_****
obviously what a typed above is a quick example not what I typed into build prop.
Thanks.

Tile rendering makes all my launchers crash even Trebuchet. The only option then left is to restore.

GigahurtzUK said:
Tried adding to end of prop file but no effect. Should i leave a space after the last entry i.e.
**********(last entry)
winowdsmgr_****
or
**********(last entry)
windowsmgr_****
obviously what a typed above is a quick example not what I typed into build prop.
Thanks.
Click to expand...
Click to collapse
I added it with no space, above the line that reads #end of build.prop
like this :
some_line
added_line
# end build properties
And you may not feel any difference, latest build is just fine without these tweaks, just added them before HWA builds came out

these are the ones i put in build.prop, and the phone feels smoother and more responsive now.
Code:
windowsmgr.max_events_per_sec=240
debug.enabletr=true
ro.min.fling_velocity=8000
ro.max.fling_velocity=12000
persist.sys.ui.hw=1
ro.media.enc.jpeg.quality=90
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
persist.sys.purgeable_assets=1
video.accelerate.hw=1
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
ro.HOME_APP_ADJ=1
#modified lines:
#dalvik.vm.dexopt-flags=m=v,o=y
#ro.telephony.call_ring.delay=0
#hwui.whitelist=0
#hwui.blacklist=
#wifi.supplicant_scan_interval=120
sent from my cm9 defy...

Disabling the boot animation didn't work for me :/
I'm using a custom boot animation located in
/system/media/bootanimation.zip
My build.prop has it as my last entry:
http://pastebin.com/raw.php?i=EsLRbFNn

How can i use the Linaro tweaks?

Bleak3993 said:
How can i use the Linaro tweaks?
Click to expand...
Click to collapse
I'm wondering the same
btw, the bootanimation trick didn't work for me!

hsrars-d said:
************************************************
IF THE LINES ARE NOT ALREADY IN BUILD.PROP, JUST ADD THEM TO THE END OF THE FILE
************************************************
So i found these in the net.
I have applied them in latest Fuzz's build and it is very smooth!!
Here are just a couple of tweaks to smoothen one's UI experience in Android 4.0 Ice Cream Sandwich. (Remember these changes won't apply without a reboot and you will need a rooted device).
Improve UI frame rate and touch response:
Code:
windowsmgr.max_events_per_sec=240
Disable kernel error logging:
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
Get rid of CPU rendering:
1. Navigate to /system/lib/egl/
2. Open the file named "egl.cfg"
3. Delete the first line. It should say "0 0 android" or something similar
4. Go back into the egl folder and delete libGLES_android.so
What this does is remove the entire soft-rendering pathway from the OS.
Enable tile rendering:
Tile rendering is a more efficient form of GPU composition, and boosts performance since each frame is split into tiles.
Code:
debug.enabletr=true
Improve Scrolling FPS:
Code:
ro.max.fling_velocity=6000
Signal Tweaks:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Network Speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
Disable bootanimation for faster boot:
Code:
debug.sf.nobootanimation=1
Click to expand...
Click to collapse
Using above fixes I get an error unfortunately trebuchet has stopped and can't operate my phone.
any ideas?

Related

(q)speed up my phone?

Hello
how can i speed my r800i
im on stock 2.3.4 baseband 66 not unlocked, but rooted :d
so is ther aby tweaks or programs to make my phone faster?
EdvinuxxxS said:
Hello
how can i speed my r800i
im on stock 2.3.4 baseband 66 not unlocked, but rooted :d
so is ther aby tweaks or programs to make my phone faster?
Click to expand...
Click to collapse
You could overclock it, using an app like SetCPU (Free here: http://forum.xda-developers.com/showthread.php?t=505419) or SetXperia (Free on google play)
Niko of Death said:
You could overclock it, using an app like SetCPU (Free here: http://forum.xda-developers.com/showthread.php?t=505419) or SetXperia (Free on google play)
Click to expand...
Click to collapse
How do you actually overclock within SetXperia? Can't find that voltage menu tutorials seem to point to. Googled for like 10 minutes, sorry for stupidity..
EdvinuxxxS said:
Hello
how can i speed my r800i
im on stock 2.3.4 baseband 66 not unlocked, but rooted :d
so is ther aby tweaks or programs to make my phone faster?
Click to expand...
Click to collapse
Hey, if ur on stock based, i recommend deleteing any custom mods/tweaks u installed, and trying our some of these, heres some build.prop tweaks:
Code:
# Adreno Optimizations
hw3d.force=1
com.qc.hardware=1
persist.sys.ui.hw=1
video.accelerate.hw=1
hwui.disable.vsync=true
ro.config.disable.hw_accel=false
windowsmgr.max_events_per_sec=90
# BLX
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Kernel Checks
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
persist.android.strictmode=0
# ADB Notif Off
persist.adb.notify=0
# Hardware Debuging
debug.sf.hw=1
debug.egl.hw=1
debug.egl.profiler=1
debug.qc.hardware=true
debug.composition.type=gpu
debug.performance.tuning=1
debug.gr.numframebuffers=3
# Purging Access
persist.sys.purgeable_assets=1
# NLN
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
# MEM
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=4096
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=6144
ro.EMPTY_APP_MEM=8192
# ADJ
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
copy it to ur build.prop, reboot and done!, u should notice a drastic improvement if this is ur only mod u have and etc... also try this:
http://forum.xda-developers.com/showthread.php?t=2295010
Pizza_Dox said:
Hey, if ur on stock based, i recommend deleteing any custom mods/tweaks u installed, and trying our some of these, heres some build.prop tweaks:
Code:
# Adreno Optimizations
hw3d.force=1
com.qc.hardware=1
persist.sys.ui.hw=1
video.accelerate.hw=1
hwui.disable.vsync=true
ro.config.disable.hw_accel=false
windowsmgr.max_events_per_sec=90
# BLX
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Kernel Checks
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
persist.android.strictmode=0
# ADB Notif Off
persist.adb.notify=0
# Hardware Debuging
debug.sf.hw=1
debug.egl.hw=1
debug.egl.profiler=1
debug.qc.hardware=true
debug.composition.type=gpu
debug.performance.tuning=1
debug.gr.numframebuffers=3
# Purging Access
persist.sys.purgeable_assets=1
# NLN
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
# MEM
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=4096
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=6144
ro.EMPTY_APP_MEM=8192
# ADJ
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
copy it to ur build.prop, reboot and done!, u should notice a drastic improvement if this is ur only mod u have and etc... also try this:
http://forum.xda-developers.com/showthread.php?t=2295010
Click to expand...
Click to collapse
okay i don this buld.prop tweak. so how to know is it working ?
EdvinuxxxS said:
okay i don this buld.prop tweak. so how to know is it working ?
Click to expand...
Click to collapse
well try play some games, it should feel much smoother and the phone should feel more smoother + u will obtain longer battery life,
Pizza_Dox said:
Hey, if ur on stock based, i recommend deleteing any custom mods/tweaks u installed, and trying our some of these, heres some build.prop tweaks:
*code snipped*
copy it to ur build.prop, reboot and done!, u should notice a drastic improvement if this is ur only mod u have and etc... also try this:
http://forum.xda-developers.com/showthread.php?t=2295010
Click to expand...
Click to collapse
Will this work even if you have other mods installed, such as AdrenoBooster or Liquid Speed?
RoboticBuddy said:
Will this work even if you have other mods installed, such as AdrenoBooster or Liquid Speed?
Click to expand...
Click to collapse
Adreno Booster, yes it will work with it
Liquid speed, maby, im not sure, i would remove all build.prop tweaks it made first then try these,

[TWEAKS][Guide] 'build.prop' Tweaks

Most of these are BS, use if you want placebo. I don't support these anymore.
If you don't want to flash zips that makes your phone faster, or you just want to do it yourself, you should try this.
Intro:
As you know Android is open source and the development of Android is increased in today’s life. Android operating system is having some of the information which is really important . Now, whenever a user wants to do editing in the Android system, they do changes in build prop. Build prop tweaks are something which helps you to do changes in the system and customize your android.
If you are having any rooted Android device, this tweak will work absolutely fine. Every user can do editing. But while editing you have to make sure that you do it properly or else it will lead to a bricked Android device. You can easily increase the bootup time of your Android. Increase sound and much more.
Here are the working build.prop tweaks for our device:
Code:
#Better RAM management
ro.HOME_APP_ADJ=1
#Improved audio and video recording quality (works perfect on XL but still works good on X)
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
#Faster Streaming videos
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
#GPU rendering (works better if you have NULL Kernel
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
#Disables built in error reporting
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#Better net speed
net.tcp.buffersize.default=4096,87380,256960, 4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,409 6,163 84,256960
net.tcp.buffersize.umts=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,8 7380,256960,4096,163 84,256960
#Saves batery
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
#3G tweaks
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
#Better scrolling
windowsmgr.max_events_per_sec=90 #Depends on your preference
ro.min_pointer_dur=8 ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#Better signal
persist.cust.tel.eons=1
#Faster boot
ro.config.hw_quickpoweron=true
#Disables error checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#Battery life
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
#Performance
debug.performance.tuning=1
Code:
#Optional
#Disables the bootanimation
debug.sf.nobootanimation=1
That's it and thanks to ALL THE DEVS ON XDA FOR THIS
:fingers-crossed:
HOW TO TWEAK YOUR 'build.prop' :
1) Download and install root explorer on your Android device from above given requirements
2) Open the application and grant the root permissions
3) Now, simply open go to '/system/' and then you will be able to see a build.prop file
4) Now, click on the option called as Mount R/O.
5) Long press on 'build.prop' and you will get a pop-up
6) Just hit open with text editor and then you are good to go
7) Copy the code given above of your choice and simply paste on your build.prop
8) Click on the save changes and then reboot your Android device.
9) To double check, you must set the permissions of build.prop to rw-r-r, so that you will not encounter some kind of error.
thanks, i was looking for this for a long time
flashed the veez tweaks zip. does I need to add these build prop tweaks or already included in the zip
pyumredkar said:
flashed the veez tweaks zip. does I need to add these build prop tweaks or already included in the zip
Click to expand...
Click to collapse
its quite optional, it's up to you:good:
Works on nougat??
vjendra said:
Works on nougat??
Click to expand...
Click to collapse
not all, but some of them

[GUIDE] ★ Build Prop Edit Tweak ★ Any Android (2018)

Here is my Build Prop Tweaks from Jumping from Various Android Phones
Which seem to be useful for all my phones
If it doesnt work for you please post or if I am missing something please let me know
Just sharing as it helps me, so trying to help others
Please try this at you own risk :fingers-crossed:
Just use Build Prop Editor from G'play (needs to be rooted)
Its how I do it
Copy and Paste the below under the Last line, Save it and reboot to take affect
ro.HOME_APP_ADJ = 1
debug.performance.tuning=1
ro.ril.power_collapse=1
ro.ril.disable.power.collapse=0
pm.sleep_mode=1
ro.config.hw_power_saving=true
persist.cust.tel.eons=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.vc_call_steps=20
ro.config.hw_power_saving=1
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
#GOOGLE DNS*
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.wcdma.dns1=8.8.8.8
net.wcdma.dns2=8.8.4.4
net.hspa.dns1=8.8.8.8
net.hspa.dns2=8.8.4.4
net.lte.dns1=8.8.8.8
net.lte.dns2=8.8.4.4
net.ltea.dns1=8.8.8.8
net.ltea.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
wifi.supplicant_scan_interval=300
# Net speed tweak
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.hspap=4096,87380,1220608,4096,1 6384,393216
net.tcp.buffersize.hsupa=4096,87380,704512,4096,16 384,262144
net.tcp.buffersize.evdo=4096,87380,563200,4096,163 84,262144
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
ro.lge.proximity.delay=0
mot.proximity.delay=25
ro.telephony.call_ring.delay=0
ring.delay=0
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.camcorder.videoModes=true
ime_vibration_pattern=0:60
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Video streaming optimization
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
media.stagefright.enable-rtsp=true
media.stagefright.enable-qcp=true
media.stagefright.enable-aac=true
# Camera Tweaks Supports Google Camera
persist.camera.HAL3.enabled=1
camera.HAL3.enabled=1
persist.camera.eis.enable=1
camera.eis.enable=1
persist.camera.is_mode=4
camera.is_mode=4
persist.camera.disable_zsl_mode=1
camera.disable_zsl_mode=1
persist.camera.gyro.android=4
camera.gyro.android=4
persist.camera.tof.direct=1
camera.tof.direct=1
persist.camera.tnr.preview=1
camera.tnr.preview=1
persist.camera.tnr.video=1
camera.tnr.video=1
ro.camera.notify_nfc=1
camera.notify_nfc=1
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
logcat.live=disable
# Auto Dimming Issues
persist.sys.cabc.enable=0
ro.service.cabc.supported=false
#scrolling speed
windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
persist.sys.scrollingcache=3
debug.sf.hw=1
-----------------
These ones I have tried in other phones but *not this one*...... yet
Just Gaming
persist.sys.NV_FPSLIMIT=60 #or 90
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20 #or30
persist.sys.purgeable_assets=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Dalvik Virtual Machine Tweaks
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.image-dex2oat-filter=speed
Click to expand...
Click to collapse
Once copied over, Save the modified script with build.prop editor and reboot
Enjoy
I will try this for few minutes.
I think many of these are outdated
nhmanas said:
I think many of these are outdated
Click to expand...
Click to collapse
some of them are, but still, this works great!
System update enabling
My device manufacturer locked System Update by
ro.miki_ui_remove_system_update=1
I made it to 0 and then the system update appeared on the settings
ro.miki_ui_remove_system_update=0
If you don't have this line in your build.prop , search for the word update
in the editor ,read the line , if it is to disable make it 0 else 1
I prefer QuickEdit app , requires root , but can directly open from root directory and edit and modify all kind of text files.
*UPDATED*
RahulR0047 said:
My device manufacturer locked System Update by
ro.miki_ui_remove_system_update=1
I made it to 0 and then the system update appeared on the settings
ro.miki_ui_remove_system_update=0
If you don't have this line in your build.prop , search for the word update
in the editor ,read the line , if it is to disable make it 0 else 1
I prefer QuickEdit app , requires root , but can directly open from root directory and edit and modify all kind of text files.
Click to expand...
Click to collapse
Thanks for that :good:
Thank you for the tutorial, it really helped me

Half GSI 8.0/8.1/9.0

HALF GSI XA1
What's new :
-Night mode
-CPU governors
-Added support of treble for next updates (now stock GSI image brick XA1)
-IMS patch (VoLTE , ViLTE) - (disabled,turned off functions in menu from VoLTE/ViLTE turn on/off)
-Soon support for 5G networks
-Support for project Treble
-Temporarily saved stock build prop from sony with mods , for compatibility of sony apps
-LCD density is temporarily changed to 380
-Pre rooted system and kernel (magisk)
-Sdcardfs - Some devices have sdcardfs kernel panicking on 8.0 . Disable for everyone for the moment ro.sys.sdcardfs=0
-Features and fixed kernel bugs , earlier patches from earlier kernel version
-Fast Charge
-Other patches
Alpha Android 8.1 :
Kernel V2 (only 8.1) (Kernel can not working correct on 8.0 !!) :
-Faster boot
-Kernel is permissive
-VoLTE switch (You can enable) (IMS)
-ViLTE (IMS)
-VoWIFI (IMS)
-VideoCall (IMS)
-Interface UT (IMS)
-Longer battery live (few hours more)
-More free RAM
KERNEL V3 - Patched kernel and system (only 8.1) :
-Multi Window
-Performance Tweaks
-Better Ram Management
-More Battery Efficiency
-Streaming Tweaks
-Net Sped Tweaks
-DNS Tweaks
-System Tweaks
-GCAM Implementation
-Responsiveness Tweaks
Android 8.1 R2 :
-CPU tweaks
-Fonts Tweaks (fonts from pie)
-Patch for VoWIFI
-Support for 802.11r
Added Init.d Tweak
-Zipalign
-Ram_Optimize
-Sqlite_Optimize
-System_Tweaks
-Ext4_Lag_Fix
-Net_Speed_Tweak
-Remount_Full_Ext4
System 8.1 have disabled features added by google and other features for performance .
System is same as 8.0 with saved and patched build.prop .
EXTRA LINE ADDED LINES :
Code:
ro.HOME_APP_ADJ=1
persist.sys.use_dithering=1
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
persist.sys.shutdown.mode=hibernate
persist.sys.scrollingcache=3
persist.android.strictmode=0
# Audio and Video Quality Tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.mp3.enabled=1
ro.media.dec.vid.mp4.enabled=1
ro.media.enc.aud.wma.enabled=1
ro.media.enc.vid.wmv.enabled=1
ro.media.enc.aud.mp3.enabled=1
ro.media.enc.vid.mp4.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.H.264.enabled=1
ro.media.enc.aud.flac.enabled=1
ro.media.enc.vid.H.264.enabled=1
# Battery Efficiency Tweaks
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Performance Tweaks
debug.performance.tuning=1
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Steaming Tweaks
media.stagefright.enable-http=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
media.stagefright.enable-record=true
# Net Speed Tweak
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
net.ipv4.tcp_ecn=0
net.ipv4.route.flush=1
net.ipv4.tcp_rfc1337=1
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_wmem=4096 39000 187000
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv6.tcp_ecn=0
net.ipv6.route.flush=1
net.ipv6.tcp_rfc1337=1
net.ipv6.ip_no_pmtu_disc=0
net.ipv6.tcp_sack=1
net.ipv6.tcp_fack=1
net.ipv6.tcp_window_scaling=1
net.ipv6.tcp_timestamps=1
net.ipv6.tcp_rmem=4096 39000 187000
net.ipv6.tcp_wmem=4096 39000 187000
net.ipv6.tcp_mem=187000 187000 187000
net.ipv6.tcp_no_metrics_save=1
net.ipv6.tcp_moderate_rcvbuf=1
net.tethering.noprovisioning=true
# IPV4 and IPV6 Support
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# 3G/4G Tweaks
ro.ril.hsxpa=2
ro.ril.hspa=2
ro.ril.lte=2
ro.ril.lte=2
ro.ril.ltea=2
ro.ril.hep=1
ro.ril.enable.3g.prefix=1
ro.ril.enable.4g.prefix=1
ro.ril.enable.dtm=1
ro.ril.hspaclass=15
ro.ril.lteclass=15
ro.ril.gprsclass=15
ro.ril.hsupa.category=10
ro.ril.hsdpa.category=30
ro.ril.lte.category=10
ro.ril.ltea.category=30
ro.ril.enable.a51=1
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.enable.a54=1
ro.ril.enable.a55=1
persist.cust.tel.eons=1
# DNS Tweaks
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.wcdma.dns1=8.8.8.8
net.wcdma.dns2=8.8.4.4
net.hspa.dns1=8.8.8.8
net.hspa.dns2=8.8.4.4
net.lte.dns1=8.8.8.8
net.lte.dns2=8.8.4.4
net.ltea.dns1=8.8.8.8
net.ltea.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
# Gaming Tweaks
persist.sys.NV_FPSLIMIT=90
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=30
# Dalvik Virtual Machine Tweaks
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.image-dex2oat-filter=speed
# Responsiveness & Speed Tweaks
ro.telephony.call_ring.delay=0
ro.ril.enable.amr.wideband=1
ro.lge.proximity.delay=25
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.config.vc_call_default=10
# Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
# Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# System Tweaks
ro.config.hw_quickpoweron=true
ro.config.hw_fast_dormancy=1
ro.securestorage.knox=false
ro.telephony.sms_segment_size=160
ro.mot.eri.losalert.delay=1000
video.accelerate.hw=1
ro.config.disable.hw_accel=false
video.accelerate.hw=1
# Camera Tweaks Supports Google Camera
persist.camera.HAL3.enabled=1
camera.HAL3.enabled=1
persist.camera.eis.enable=1
camera.eis.enable=1
persist.camera.is_mode=4
camera.is_mode=4
persist.camera.disable_zsl_mode=1
camera.disable_zsl_mode=1
persist.camera.gyro.android=4
camera.gyro.android=4
persist.camera.tof.direct=1
camera.tof.direct=1
persist.camera.tnr.preview=1
camera.tnr.preview=1
persist.camera.tnr.video=1
camera.tnr.video=1
ro.camera.notify_nfc=1
camera.notify_nfc=1
persist.sys.debug.multi_window=true
persist.sys.overlay.nightmode=true
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
go.build.system_root_image=true
ro.config.low_ram=true
debug.sf.nobootanimation=1
persist.sys.shutdown.mode=hibernate
dalvik.vm.heapsize=72m
persist.adb.notify=0
persist.sys.debug.multi_window=true
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.telephony.call_ring.delay=0
ring.delay=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
wifi.supplicant_scan_interval=180
persist.sys.purgeable_assets=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
debug.performance.tuning=1
Some IMS options/services can don't work on your device if you are from more restricted countries , that's not a BUG .
If you are from restricted countries don't say about BUG . Check first your phone provider .
Few features can don't work in this alpha V2 rom . This is cross of new and old version of oreo 8.1 . Soon next version please wait .
This alpha is stable and ready to use . Please turn off animation (look on screenshot) , for fix all bug's in this rom , eariler rom and next releases .
First alpha of 8.1 soon . You can check in the comment screenshots from my own stability tests .
Who want to help me soon with fix any bug's in new android versions i welcome to write to me pm
First release give you oreo , after oreo i make pie for you with your help (bug fixing) . To start make a pie image for XA1 .
DOWNLOAD
MEGA 8.0
MEGA 8.1 Alpha
Drive 8.1 Alpha
MEGA 8.1 R2
LAST R4 RELEASE IS NOW AVAILABLE HERE !!
AFTER DOWNLOAD MY SYSTEM , PLEASE RESTORE ALL !!!! BOOT,RECOVERY.SYSTEM - MAKE COMPLETE RESTORE OR YOU BRICK YOUR PHONE HARD !!!! . FILE FOR RESTORE PATH : YOUR_XPERIA\SD CARD\TWRP\BACKUPS\YOUR_DEVICE_ID\MY RESTORED SYSTEM FOLDER
If you like or download my system , please press Thanks
If you want to buy me a coffee for my work you can use PayPal Thanks
https://paypal.me/marek10747
MY OWN REPO (can be unstable !!!!) :
VENDOR
Important Info for other developers :
If you want to use files from my repo I say YES , but you must : 1.say about me in you thread 2.allow me to make and publish mod this files for better my android versions 3.send me a private message . If you don't do 1,2,3 i make submit your file to XDA . Thanks for use points 1,2,3
My Facebook group :
Facebook support group , for all devices !!​
More after first alpha . First version is preview only .
This ROM don't have BUGS (possibly) . If you find BUG write comment .
reserved
for the moment it works fine! )
Very interesting.
Please post detailed step by step, I could not understand the steps of the OP.
boyrock said:
Very interesting.
Please post detailed step by step, I could not understand the steps of the OP.
Click to expand...
Click to collapse
I can't write a post step by step , because I'm from Poland and my English is not perfect and now i can't do that more better/perfect . You can help me say that better .
VoLTE switch
MAREK10747 said:
I can't write a post step by step , because I'm from Poland and my English is not perfect and now i can't do that more better/perfect . You can help me say that better .
Click to expand...
Click to collapse
You can send in your language and i can translate for you.
boyrock said:
You can send in your language and i can translate for you.
Click to expand...
Click to collapse
Ok . I do that tommorow .
No animation
8.1 Oreo alpha is coming soon !!
Battery special patch tested and working correctly . Reworked stamina mode for user's you need only make few optimizations and turn on stamina . Next time charge battery to 100% . That's all your device is ready.
who's interested project ????
Base of link's .
https://drive.google.com/file/d/18v43Z6C9EkI71huAQiYKHvyMMGEyO26s/view?usp=sharing
https://drive.google.com/file/d/1AIpGHJlglAuqRwzXMryUL3emQK2b-gvO/view?usp=sharing
https://drive.google.com/file/d/1Skqi2pp8MNnH_3t5mwHX0fxJCKmGh1bt/view?usp=sharing
https://drive.google.com/file/d/1l22chgE7JcyukVXv-nty5ApOZMjje7jr/view?usp=sharing
https://drive.google.com/file/d/1lri7Tum2Bnz2BdTcbjIybgDUjHgreX8K/view?usp=sharing
https://drive.google.com/file/d/1tNqo-33RkmJFoMz77Sf7etr17eiVtBw5/view?usp=sharing
https://drive.google.com/file/d/1xX_EyORvh53rr4OzPJFkHs735rOBiLmd/view?usp=sharing
I apologize for the inconvenience but you could add more detailed steps on how to install your ROM I'm asking you please, friend, thanks in advance
Diego057 said:
I apologize for the inconvenience but you could add more detailed steps on how to install your ROM I'm asking you please, friend, thanks in advance
Click to expand...
Click to collapse
I can help you, i tried these steps and everything works fine.
Just add a important information, before you start:
My device is G3116, and this ROM is based in G3112. Not problem here when you use this ROM but, if you want to go back to Stock ROM (flash via Flashtool), the device is no longer recognized as G3116, just G3112. I can't find a solution to this, just modify the ftf file in Flashtool to go back to stock. Please consider this, but this ROM is working fine, no problems so far. You can keep it for long time.
1. Flash TWRP (boot.img and recovery.img) from here: https://forum.xda-developers.com/xa1/development/kernel-xperia-xa1-v4-cross-t3897585
2. Download and Unzip rom from OP and save in your SDCard, in the folder named TWRP.
3. Boot in TWRP and make a backup (if you want, but i'm not sure if will work because, in my case, for now data is encrypted and i'm not able to access data or backup data)
4. Go to Restore and select the folder that you saved in SDCard (select storage, SDCard)
5. Confirm Restore, let it finish and reboot device. It will take some minutes in SONY logo (no bootanimation in this ROM)
6. When finish boot, the setup wizard will appears.
7. Configure everything you want and enjoy.
THANKYOU!!
Thank you for helping me Sir Marek ! your so kind :angel:
MAREK10747 said:
8.1 Oreo alpha is coming soon !!
Click to expand...
Click to collapse
Cheers :highfive:
No wifi
Installed on G3121 (8.1 R2), currently in setup and I can't connect to Wifi because it doesnt find any networks
Not really sure what to do now, any help appreciated
edit: 8.1 alpha doesnt work either
edit 2: would it be possible to flash stock ftf, go through setup, then restore this without wiping data? or does that make no sense and wouldnt work at all?
synx91 said:
Installed on G3121 (8.1 R2), currently in setup and I can't connect to Wifi because it doesnt find any networks
Not really sure what to do now, any help appreciated
edit: 8.1 alpha doesnt work either
edit 2: would it be possible to flash stock ftf, go through setup, then restore this without wiping data? or does that make no sense and wouldnt work at all?
Click to expand...
Click to collapse
I've solved this problem just flashing the kernel provided by the dev from this OP.
synx91 said:
Installed on G3121 (8.1 R2), currently in setup and I can't connect to Wifi because it doesnt find any networks
Not really sure what to do now, any help appreciated
edit: 8.1 alpha doesnt work either
edit 2: would it be possible to flash stock ftf, go through setup, then restore this without wiping data? or does that make no sense and wouldnt work at all?
Click to expand...
Click to collapse
Restore all , not only one file . You can hardbrick device . My system for correct work you must install from first to last update , with all files.

Speed Booster [Magisk_Module] & Tweaks

#Speed Booster All Devices v7 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging (VENDOR STOCK)
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.2 [Magisk Module]
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic Daisy v7.3 [Magisk Module]
- Good touch screen response
- Better response and speed
- Fast Charging (VENDOR STOCK)
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
[OUTHERS]
#Speed Booster All Devices v7.0.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster All Devices v7.0.2 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging (VENDOR STOCK)
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1.2 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- Power Saving
- GPU Performance
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging (VENDOR STOCK)
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.2.1 [Magisk Module]
- Better response and speed
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic Daisy v7.3.1 [Magisk Module]
- Better response and speed
- Fast Charging (VENDOR STOCK)
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.4 [Magisk Module]
- Good touch screen response
- Better response and speed
- Power Saving
- vol step
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.4.1 [Magisk Module]
- Good touch screen response
- Better response and speed
- vol step
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
Note: Do not use the speedbooster daisy magisk module in rom stock. It is recommended only for custom pie (not having custom vendor). Recommended is the "All devices" version.
If you see something wrong please let me know.
If the device does not start, use magisk uninstaller.zip
#Tested on Android 9 Custom and Android 10, Miui, GSI.
Thx pawelik by the FAST CHARGING (VENDOR STOCK PIE) file.
Thx Rom by dns code - [MODULE] CloudflareDNS4Magisk
If there is anyone else to thank let me know.
Magisk Official:
https://github.com/topjohnwu/Magisk/releases
Magisk Ianmacd stable: https://github.com/ianmacd/MagiskBuilds/tree/private?files=1
https://github.com/ianmacd/MagiskBuilds
@ Magiskplus
MAY HAPPEN FROM ENTERING IN BOOTLOOP, I NOT RESPONSIBLE FOR DAMAGE CAUSED OR DATA LOST BY USING THIS ZIP.
Telegram: @ A2liteOfficial
Outhes Tweaks/Fixes:
I recommend using RootExplorer app.
# Allowed packages to use AUX camera vendor/system
vendor.camera.aux.packagelist=com.bsgmod.camera,com.google.android.GoogleCameraWide,com.android.camera,org.codeaurora.snapcam,com.android.camera,com.huaqin.factory,org.lineageos.snap
vendor.camera.aux.packagelist2=com.android.systemui,com.huaqin.cameraautotest,com.huaqin.runtime
camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi
vendor.camera.aux.packagelist=com.dual.GCam,com.Wide.GCam,com.Tele.GCam,org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi,com.longcheertel.cit
# HAL1 apps list or force those apps to use hal1 - lagfix - vendor/system
vendor.camera.hal1.packagelist=com.android.camera,com.whatsapp,com.intsig.camscanner,com.instagram.android,com.facebook.orca,com.skype.raider,com.google.android.talk
camera.hal1.packagelist=com.skype.raider,com.google.android.talk,com.whatsapp, com.viber.voip,com.google.android.talk,com.instagram.android
# Enable Hal3 and Cam2api in build.prop and in vendor/build.prop
persist.camera.HAL3.enabled=1
persist.vendor.camera.HAL3.enabled=1
persist.vendor.camera.stats.test=5
persist.camera.stats.test=5
persist.camera.eis.enabled=1
# fix green cam
persist.camera.CDS=on
# Cam of WhatsApp and insta fix
camera.disable_treble=0
# Fix low volume in voice rec on whatsapp, telegram...
persist.vendor.audio.fluence.voicerec=false
## Camera Tweaks Supports Google Camera" >> /system/build.prop
persist.camera.HAL3.enabled=1 >> /system/build.prop
camera.HAL3.enabled=1 >> /system/build.prop
persist.camera.eis.enable=1 >> /system/build.prop
camera.eis.enable=1 >> /system/build.prop
persist.camera.is_mode=4 >> /system/build.prop
camera.is_mode=4 >> /system/build.prop
persist.camera.disable_zsl_mode=1 >> /system/build.prop
camera.disable_zsl_mode=1 >> /system/build.prop
persist.camera.gyro.android=4 >> /system/build.prop
camera.gyro.android=4 >> /system/build.prop
persist.camera.tof.direct=1 >> /system/build.prop
camera.tof.direct=1 >> /system/build.prop
persist.camera.tnr.preview=1 >> /system/build.prop
camera.tnr.preview=1 >> /system/build.prop
persist.camera.tnr.video=1 >> /system/build.prop
camera.tnr.video=1 >> /system/build.prop
ro.camera.notify_nfc=1 >> /system/build.prop
camera.notify_nfc=1 >> /system/build.prop
# Performance
sys.use_fifo_ui=1
debug.sf.latch_unsignaled=1
# Netflix custom property
ro.netflix.bsp_rev=Q660-13149-1
# bluetooth fix
persist.vendor.btstack.enable.splita2dp=false
persist.vendor.btstack.a2dp_offload_cap=false
# bt fix 2 Add this to vendor build prop
persist.bluetooth.bluetooth_audio_hal.disabled=true
# BT FIX 3 For fixing BT issue. Add this below lines in /vendor/build.prop
persist.vendor.btstack.enable.splita2dp=false
persist.vendor.btstack.a2dp_offload_cap=false
#BT FIX 4
1. Bluetooth audio connection fix
Backup the file /vendor/overlay/BluetoothResCommon.apk
Simply remove /vendor/overlay/BluetoothResCommon.apk by root explorer app
2. aptX HD
Install "Bluetooth stack audio bitrate changer for SBC + aptX & aptX-HD enabler" from Download of Magisk Manager.
3. build.prop
Open /vendor/build.prop and find "persist.vendor.bt.a2dp_offload_cap=sbc-aac" and replace "sbc-aac" to "sbc-aac-aptx-aptXHD" (Add -aptx-aptXHD)
Note: if you don't find the add "persist.vendor.bt.a2dp_offload_cap=sbc-aac-aptx-aptXHD"
add:
persist.bt.a2dp_offload_cap=sbc-aptx-aptxhd
persistent.bt.a2dp_offload_cap=sbc-aptx-aptXHD-aac-ldac
4. Restart device and test
#FIX BT(a2dp) 5:
qcom.bluetooth.soc=smd
outhers:
https://forum.xda-developers.com/pr...de-fix-bluetooth-audio-a2dp-aptx-gsi-t3950938
https://matjaz.it/simple-fix-for-bluetooth-audio-not-working-on-android-10/
https://www.reddit.com/r/oneplus/comments/d02ssd/is_aptxaptx_hd_working_for_anyone_after_the/
https://github.com/xamarin/xamarin-android/issues/3508
https://github.com/PixelExperience-...mmit/977444af69f10fc135d07e19f1e5f1183e73e9ff
##FiX BT 6 - system/buid.prop
#force disable Bluetooth AAC by default
persist.bt.a2dp.aac_disable=true
#system prop for wipower support
ro.bluetooth.emb_wp_mode=false
ro.bluetooth.wipower=false
#system prop for Bluetooth SOC type
vendor.bluetooth.soc=cherokee
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.enable.splita2dp=true
persist.vendor.btstack.a2dp_offload_cap=sbc-aptx-aptxhd-aac
ro.bluetooth.remote.autoconnect=true
ro.bluetooth.request.master=true
vendor/build.prop:
persist.vendor.bt.a2dp_offload_cap=sbc-aptx-aptxhd-aac
ro.bluetooth.a2dp_offload.supported=true
persist.bluetooth.a2dp_offload.disabled=false
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac
#Fix BT 7:
system prop for Bluetooth SOC type:
vendor.bluetooth.soc=cherokee
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.enable.splita2dp=false
persist.vendor.btstack.a2dp_offload_cap=false
#system prop for A4WP profile support
ro.bluetooth.a4wp=false
#system prop for wipower support
ro.bluetooth.emb_wp_mode=false
ro.bluetooth.wipower=false
# Navbar fix
persist.navbar_enabled=1
# fix - hide all icon
Write this in Terminal Emulator:
su
settings put secure sysui_rounded_content_padding 0
# insecure adb flag for roms
ro.debuggable=1
ro.secure=0
# Mtp fix
ro.adb.secure=0
persist.adb.notify=1
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
# Fix Call
persist.vendor.audio.fluence.voicecall=true
# Fix dp4 can't add google account or #Optimize for MSM-8996 & MSM8953 system/build.prop vendor/build.prop
ro.sys.fw.dex2oat_thread_count=4
dalvik.vm.boot-dex2oat-threads=8
dalvik.vm.dex2oat-threads=4
dalvik.vm.image-dex2oat-threads=4
dalvik.vm.dex2oat-filter=speed
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
# Spectrum support:
spectrum.support=1
# https://forum.xda-developers.com/mi-a2-lite/themes/spectrummorpho-xiaomi-devices-t3986071
# Volte FIX
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
#volstep_tweak
ro.config.media_vol_steps=25
ro.config.vc_call_vol_steps=25
# vendor fix message - there's an internal problem.. system/build.prop
ro.treble.enabled=false
#Or update defconfig and vintf
# Fix SafetyNet manually - ctsProfile work by setting this in build.prop
ro.system.build.fingerprint=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/8.1.10:user/release-keys
ro.build.description=tissot-user 8.0.0 OPR1.170623.026 8.1.10 release-keys
ro.build.fingerprint=xiaomi/tissot/tissot_sprout:8.0.0/OPR1.170623.026/8.1.10:user/release-keys
#enable wq_power_save, this can save some batterry if the tasks dont have priority
wq_power_save=1
#tweaks
echo "persist.sys.scrollingcache=3"
echo "profiler.force_disable_ulog=1"
echo "logcat.live=disable"
echo "ro.kernel.checkjni=0"
echo "ro.config.nocheckin=1"
echo "wifi.supplicant_scan_interval=300"
echo "pm.sleep_mode=2"
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.performance.tuning=1
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.sf.hw=1
#Support HDR & FHD
sys.display-size= "YOU_RESOLUTION" - Daisy is 2280x1080
video.accelerate.hw=1
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
#Tweaks for RAM
ro.config.fha_enable=true
ro.sys.fw.bg_apps_limit=32
ro.config.dha_cached_max=16
ro.config.dha_empty_max=42
ro.config.dha_empty_init=32
ro.config.dha_lmk_scale=0.545
ro.config.dha_th_rate=2.3
ro.config.sdha_apps_bg_max=64
ro.config.sdha_apps_bg_min=8
#Internet Velocity
net.tcp.buffersize.default = 4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge = 4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda = 4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa = 4096,87380,256960,4096,163 84,256960
#Signal Performance
ro.telephony.call_ring.delay=0
ring.delay=0
#Save Battery Without Performance Drop
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.security.mdpp.ux=Disabled
wifi.supplicant_scan_interval=180
persist.sys.storage_preload=0
wlan.wfd.hdcp=disable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
#Launcher Is Kept in Memory
ro.HOME_APP_ADJ=1
#Allow Purge of Assets To Free Ram
persist.sys.purgeable_assets=1
#Smooth Video Stream
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#Force GPU Render On 2D Operations
debug.sf.hw=1
#Increase General Performance
debug.performance.tuning=1
#Google Assistant
ro.opa.eligible_device=true
#Sim Slot
ro.multisim.simslotcount=2
#Enable Faster Boot
ro.config.hw_quickpoweron=true
#Boot & Shutdown Animation FPS Boost
boot.fps=32
shutdown.fps=32
#Hibernate Device
persist.sys.shutdown.mode=hibernate
#Gaming Tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
#set default rendering to opengl from skiagl
debug.hwui.renderer=skiagl
#FDE CHANGE NAME
in terminal
setprop com.feravolt.fdeai.name AI_NAME
OR
put it in build.prop
com.feravolt.fdeai.name=InsertNameHere
#force the app to use 2.0 or vulkan
debug.hwui.renderer=vulkan
#Improve performance - Adreno Gpu gamers add these lines to build.prop and then restart the device. game perfomance should get better
com.qc.hardware=true
debug.composition.type=gpu
debug.egl.hw=1
debug.egl.profiler=1
debug.enabletr=true
debug.gralloc.enable_fb_ubwc=1
debug.overlayui.enable=1
debug.performance.tuning=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
debug.sf.hw=1
debug.sf.latch_unsignaled=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
hwui.disable_vsync=true
hwui.render_dirty_regions=false
ro.config.enable.hw_accel=true
ro.fb.mode=1
ro.product.gpu.driver=1
ro.sf.compbypass.enable=0
#misc/outhers
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.min_pointer_dur=1
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
wifi.supplicant_scan_interval=600
logcat.live=disable
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
ro.mot.eri.losalert.delay=1000
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.config.nocheckin=1
windowsmgr.max_events_per_sec=150
# sys.use_fifo_ui=1
# persist.sys.scrollingcache=3
# windowsmgr.max_events_per_sec=300
# ro.max.fling_velocity=13800
# ro.min.fling_velocity=10500
# debug.kill_allocating_task=0
MIN_HIDDEN_APPS=false
ACTIVITY_INACTIVE_RESET_TIME=false
MIN_RECENT_TASKS=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
ENFORCE_PROCESS_LIMIT=false
# ro.config.fha_enable=true
# ro.config.dha_cached_max=16
# ro.config.dha_empty_max=32
# ro.config.dha_empty_init=32
# ro.config.dha_lmk_scale=0.990
# ro.config.dha_th_rate=1.4
ro.config.sdha_apps_bg_max=64
ro.config.sdha_apps_bg_min=8
# Disable fast dormancy
ro.fast.dormancy=0
ro.config.hw_fast_dormancy=0
ro.ril.fast.dormancy.rule=0
# Enable fast dormancy
ro.fast.dormancy=1
ro.config.hw_fast_dormancy=1
ro.ril.fast.dormancy.rule=1
ro.semc.enable.fast_dormancy=true
# Disable IMS debug logs
# persist.ims.disableDebugLogs=1
# Disable quality control
# persist.radio.oem_socket=false
# set prefer network type
# LTE, GSM, WCDMA(9)
ro.telephony.default_network=10
telephony.lteOnCdmaDevice=1
telephony.lteOnGsmDevice=1
telephony.lte.cdma.device=1
telephony.lte.gsm.device=1
ro.ril.def.preferred.network=10
# Doze parameters
pm.sleep_mode=1
doze.display.supported=true
doze.pulse.notifications=true
doze.use.accelerometer=0
doze.pickup.vibration.threshold=2000
doze.pulse.brightness=5
doze.pulse.delay.in=200
doze.pulse.duration.in=1000
doze.pulse.duration.out=1000
doze.pulse.duration.visible=3000
doze.pulse.proxcheck=0
doze.pulse.schedule=1s,10s,30s,60s,120s
doze.pulse.schedule.resets=3
doze.pulse.sigmotion=0
doze.shake.acc.threshold=10
doze.vibrate.sigmotion=0
debug.doze.component=0
# Doze parameters
pm.sleep_mode=1
# Faster boot mode
# persist.sys.shutdown.mode=hibernate
# ro.config.hw_quickpoweron=true
# Set default power mode to low power for encoder
# vidc.debug.perf.mode=2
# Additional modified props
ro.config.nocheckin=1
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
wifi.supplicant_scan_interval=360
#miracast props
PRODUCT_PROPERTY_OVERRIDES += \
persist.debug.wfd.enable=1
#fix video calls have an audio echo problem - Add this to vendor's prop
ro.vendor.audio.sdk.fluencetype=fluence
#How to improve better signal reception/Fix signal
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#[FIX] NEW PUBGM UPDATE NOTCH
search for this "ro.product.model" set the value from "POCO F1" to "MI 8"
##FIX GPLAY
1. Clear App Data of Google Pay
2. Reboot to TWRP
3. Go to Advanced / File Manager
4. Navigate to file /data/data/com.google.android.gms/databases/dg.db
5. Select chmod, enter "440" and confirm
6. Reboot to System and you should be able to use Google Pay
##Magisk HIDE - Fix for vendor mismatch popup:
1. Install "magsisk hide props config" module from magisk downloads.
2. Install any terminal emulator from play store, I use terminus (as I use it for my ssh too). On terminus go to terminals>connect>local terminal.
3. Type su and hit enter.
4. Type props and hit enter.
5. Follow the instructions on screen to edit the fingerprint. Select your device in later steps. Reboot.
#FP FIX
TWRP, mount persist, /persist/data or /data/persist and remove all fingerprint_0_0 etc,
#FP FIX 2
download selinux switcher app, for example https://labs.xda-developers.com/store/app/com.ibuprophen.selinux set selinux for permissive, reboot phone, add fingerprint, then set selinux back to enforcing, and finally reboot. proof.
#Fix headphone volume - incall volume when your on a phone call:
Go to vendor>etc>mixer paths tasha (with an root explorer, edit it RX0 is default set to 84, set it to 90 or 92
Change it to 90-91 or 92
Save and reboot
Only change the RX0
MAY HAPPEN FROM ENTERING IN BOOTLOOP, I DON'T RESPONSIBLE FOR DAMAGE CAUSED OR DATE LOST BY USING THIS.
yeshua77 said:
#Speed Booster All Devices v7 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Daisy v7.1 [Magisk Module]
- Memory Performance
- Rearrange Litle Core ,Big Core CPU
- DNS 1.1.1.1,1.0.0.1
- Power Saving
- GPU Performance
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Unthermal CPU, Battery
- Fast Charging
- Permission hosts for Ads blocking
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic All Devices v7.2 [Magisk Module]
- Good touch screen response
- Better response and speed
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
#Speed Booster Basic Daisy v7.3 [Magisk Module]
- Good touch screen response
- Better response and speed
- Fast Charging
- Best mobile internet signal adjustment
- Disable the error checking
- Disables the sending of usage data
- Disable stats logging & monitoring
- And other tweaks
If you see something wrong please let me know as I am still learning.
If the device does not start, use magisk uninstaller.zip
#Tested on Android 9
#Magisk stable: https://github.com/ianmacd/MagiskBuilds?files=1
https://github.com/ianmacd/MagiskBuilds
https://t.me/magiskplus
MAY HAPPEN FROM ENTERING IN BOOTLOOP, I NOT RESPONSIBLE FOR DAMAGE CAUSED OR DATA LOST BY USING THIS ZIP.
Telegram: https://t.me/A2LiteOfficial
Click to expand...
Click to collapse
Have anybody tried it out yet? Any feedbacks?
chalseu said:
Have anybody tried it out yet? Any feedbacks?
Click to expand...
Click to collapse
Okay so I have tested it out, and I can notice some boost in performance and display responsiveness. Not too much, but noticeable. Have fun trying the module guys!
Uninstalled it because I already have FDE AI app which may conflict with this module.
Using 7.1 with FDE.AI, no issues so far. Asphalt 8 runs smooth at maxed settings.
leitseleac said:
Using 7.1 with FDE.AI, no issues so far. Asphalt 8 runs smooth at maxed settings.
Click to expand...
Click to collapse
Good to know! Thanks for sharing.
I have problems with hotspot. The device connecting to my hotspot can't access internet. Probably because of the Cloudflare DNS, but works fine with the Basic version.
anyone tried this with 10 GSI?
Will this work on MIUI11 custom rom?
Good module but I hate the touchscreen response...can I revert only the touchscreen sensitivity ?
notthesun said:
Good module but I hate the touchscreen response...can I revert only the touchscreen sensitivity ?
Click to expand...
Click to collapse
Updated, thanks for your feedback.
barumbads said:
Will this work on MIUI11 custom rom?
Click to expand...
Click to collapse
use the "All Devices" version.
hi, looks like its not working for me on daisy 10.0.13.0
the 7.1 breaks my edxposed, it shows not installed in xposed manager
and the 7.3 breaks ma magisk, it also says not installed in magisk manager
rom 10.0.13.0
magisk 19.3
riru core 19.1_2
riru edxposed 0.4.5.5_beta
update
yeshua77 said:
update
Click to expand...
Click to collapse
Thank you for the update :good: . all versions working for Q ? or v7.4.X only?
barumbads said:
Thank you for the update :good: . all versions working for Q ? or v7.4.X only?
Click to expand...
Click to collapse
Only the all devices version is compatible.
how to check this module function or not when done installing?
How can i use this? should i replace it with build.prop?
i mean the first comment, check it
what version should i use in your android 10 msm extended custom rom?
How do you uninstalled it?
chalseu said:
Okay so I have tested it out, and I can notice some boost in performance and display responsiveness. Not too much, but noticeable. Have fun trying the module guys!
Uninstalled it because I already have FDE AI app which may conflict with this module.
Click to expand...
Click to collapse

Categories

Resources