Develop Bugs

Plastic Case Review

So I just got another new case.
I got it from eBay seller augustonline for $3.89 w/ free shipping.
http://cgi.ebay.com/Black-Rubber-Ha...000-GALAXY-S-/150475142893?pt=PDA_Accessories
This is similar to the mesh snap-on case that others have posted about. It's a single piece that snaps on to the back of the phone. The material is hard plastic but it has a bit of a rubberized feel which provides just a little grip.
The fit is perfect. And, unlike the mesh case, it does not have the awkward cutout for the TV antenna that the Korean cases have.
As others have pointed out with this type of case, it does not provide full protection for all sides. I was also concerned about this, but found that it wraps around the edges just enough to protect the face of the phone. So, if you place it face-down the phone doesn't touch. Also, the corners are protected but the top and bottom are exposed.
It's a solid color with no branding so if you really like the Galaxy S logo, you won't be able to see it with this case.
All in all, this is a nice case and if you like this type of case, I would definitely recommend it. It fits well, has a nice clean look to it, and is less than $5. I think this will be my daily driver for a while (or until some positive reviews of the SGP Slider case start coming in).

Sweet as I was wondering whether the fit would be good or not, so thats good news
Can't wait for my orange one to get here!

Cool good to know it fits perfectly i ordered a green one of these almost two weeks ago i should be receiving it any day now

The case isn't bad for $4 (or the $8 I paid from a US seller), but don't expect it to hold up for very long. The rubberized texture is wearing off after less than a week.

newstoneage said:
The case isn't bad for $4 (or the $8 I paid from a US seller), but don't expect it to hold up for very long. The rubberized texture is wearing off after less than a week.
Click to expand...
Click to collapse
I was just thinking about updating this post when I saw your reply. I noticed this morning that the rubberized coating is coming off on the corners of the case. It's not very noticeable at the moment, but I imagine it will start to peel off everywhere in the not so distant future.
For me the case is temporary until SGP gets their stuff together, but I don't think I would recommend this case to anyone that is looking for long-term protection.

that looks pretty gnarly. I have the snap on two piece case from T-Mobile. With the chrome bezel and rubbery back. Once I get bored of it I'll have to try that one.
Sent from my SGH-T959 using XDA App

Love this case so far. Especially with my custom logo! =D
There is no player on the warriors with the number 89. That's just the number I like personally.

I don't think this can be compared to mesh case. The quality of the korean mesh case is awesome. That is why it is like 20 bucks.
Sent from my SGH-T959 using XDA App

Rearthusa Extremely thin case(+Screen Protector) for our Galaxy Note

Ive done business with them in the past with my sgs2. I ordered about 5 different cases and used there matte screen protectors with no issues. I emailed them a month ago to release something for the galaxy note and they came through. Very high quality cases and screen protectors. Will post update once I recieve mine.
http://www.ebay.com/itm/Samsung-Gal...cessories&hash=item41609d223e#ht_15433wt_1031
pictures.
http://myrearthusa.com/product_images/spec_images/galaxy_note_slim_prd.jpg
video of the case for sgs2
http://www.youtube.com/watch?v=ME6e-hK9w0E

That material looks very slippery. Are the sides "grippy?"

I love the headphone jack and micro USB caps to protect it from dust! Might grab a metallic color one!

I want their Steel Bumper series on my Note.

I like to looks of this. Does anyone have this case yet? I know it is silicone but is it more rigid than a regular tpu case?

planoman said:
I like to looks of this. Does anyone have this case yet? I know it is silicone but is it more rigid than a regular tpu case?
Click to expand...
Click to collapse
I ordered it last night from Louisiana. I'll post up a short review when it arrives.

Just ordered mine too, looks great ! thanks for posting

Any one received the case yet?

***there is no tether included with the Rearth Note case even though it says so****
Dear ericshmerick,
Hi,
I'm really sorry for the confusion. Our design made a mistake on the
detail description. However, this Kit does not have a lanyard with the
package. We are still working on an accessories option so that you can
purchase a lanyard separately. I hope this help. If you have any other
questions feel free to let me know.
Regards
Charlie
-rearthusa
****
So in other words, they advertised to include a 0.5 cent part but will instead offer if later for sale even though it's advertised as included.
Keep it classy rearth. No sale for me (and it was in my cart ready to purchase).

wow, that looks amazing.

I received my case last week. Unlike my great experience with sgs2, I received a damaged retail box and a case with buff marks all over it. Was very unhappy but they are sending me a brand new one now. Will post a short review when I receive the new one.
Like the poster above stated it does not come with a lanyard. Screen protector is pretty good though.

Just a few quick pics. Came in the mail today. Overall has a nice fit to it. The case is quite slick(slippery), yet feels okay in the hands because of the lack of lip around the entire face. It does get smudged quickly and it is noticible. It is a soft silicon type but much more rigid once on and the slickness actually helps the feel of the unit gliding in and out of your pocket.
Around the case basically the button areas are cutout and the sides are half covered by this(bumper part) of the case, hence no lip on the sides.
The top and bottom both have a decent lip to allow faceplanting of the Note. And the Stereo Headphone port and Micro Usb both have plugs to keep the dust away, very nice touch.
The screen protector is also better than the 5pk for $4.00 ebay special, as it has the entire face covered with the exception of the ft cam notch where it is blank in the space right above the cam itself.
In the first pic my I4 with Cleave Aluminum Bumper is shown for size along with the Note with Rearth case.

This case is quite nice. I basically echo everything previously said.
It's kind of a pain to get off if you need to change the battery though, but that goes for most hard cases like this I guess. I already have a screen protector on so I'm not touching the one that came with the case yet.
- Frank

I just got mine yesterday, and I have to say I am EXTREMELY disappointed in my purchase. I paid $28.00 for a case that is sub-par to the hard shell Nillkin I bought for about $10. The case is slick, shiny, easily smudged, and provides absolutely NO protection to the Note. If there was a single good thing I could say about it, it is the fact that it IS thin. It's like having no case at all. At the very least, they could have made it a matte finish. It's worth about $10.
This is about the 3rd or 4th different brand of case I have tried for my Note.
Save your money.

I agree with yeahmon. This case is expensive!!!
Go get a Nillkin ultra slim hard case instead. Only US$9.99 and comes with a screen protector too. Free shipping.
http://www.obostore.com/Nillkin-Ult...Faceplate-for-Samsung-Galaxy-Note-p-3357.html
I bought one and measured it. Only about 11mm thick. Great and nice fitting case with good quality material.
More colours at a slightly higher price at US$12.49.
http://www.obostore.com/Nillkin-Shi...Faceplate-For-Samsung-Galaxy-Note-p-3356.html
US$27.99? I can buy 2 cases and have change left.
There are a lot of nice hard cases in obostore at a really good price. Go take a look guys and gals.

a matte version does exist
yeahmon said:
I just got mine yesterday, and I have to say I am EXTREMELY disappointed in my purchase.
...
At the very least, they could have made it a matte finish. It's worth about $10.
...
Click to expand...
Click to collapse
I have ordered this case as well but can not yet comment on it's quality, or lack thereof, since it has not yet reached me.
I will certainly comment on that once I have some experience.
They do have a matte finished black case though.
In fact I ordered a matte one, even though I visually prefer the shiny black version (they call it noble black). To avoid exactly the problems you are describing (easily smudged and scratched). As said, I can not comment on this actually being the case and certainly will report back on this.

yeahmon said:
I just got mine yesterday, and I have to say I am EXTREMELY disappointed in my purchase. I paid $28.00 for a case that is sub-par to the hard shell Nillkin I bought for about $10. The case is slick, shiny, easily smudged, and provides absolutely NO protection to the Note.
Click to expand...
Click to collapse
What case are you comparing it to? The one in ddeath's post?
Compared to that Nillkin case, the Ringke case offers better protection since the bottom has zero protection on the nillkin case. It's not only covered on the Ringke case but the Ringke also has caps for the headphone/usb ports so you don't get lint in them.
Yes, the Nillkin case is cheaper. And I also shouldn't have gotten the shiny case. But from a protection standpoint it's exactly as advertised. I don't understand the dissapointment.
I'll probably use this case as a daily driver and swap it with a thicker, higher protection case for 'heavy days' (trips or whatever).
- Frank

Disregard this post

I bought their case two weeks ago, and I am reasonably happy with it. I bought the one with "matte black" finish, so it was not slippery. Feels pretty solid in hand, actually.
All the cutouts on the case are very precise. The rubber caps help a lot. But as everyone said, the lanyard was missing, so I emailed their support and they sent me a lanyard in a separate mail very shortly. The lanyard looks exactly like what the photo shows, but I don't know how to attach the lanyard, because the case was so tight, I don't see a hole where I can attach the string. If anyone knows, please enlighten me.
Because the case is so slim, I feel its primary purpose is to prevent scratches on the front, side and back in daily use. But I personally would doubt its shock absorption capability when you drop it.

This case is more for people who like to go naked. It adds no extra bulk to the note. And it will protect it from some small drops. It will protect from the housing getting scratched.
Its not for people who need maximum protection but for people who want something that's barely there.
GALAXY NOTE

Cruzerlite VS Diztronic REVIEW

Which one to choose? which one to get? which one is better? Well i get messages all day everyday in regards of this. So I said..ima make a comparison video
Here u ll see the things I like from each case and the fitment as well
enjoy
http://youtu.be/EFGpC0KBjN4

I ordered myself the matte black tpu from Diztronic.

kch ugh
Nice quick review!
I gave both of these cases a fair go. Both of them I ran with for a week. I've decided to stick with my Diztronic TPU. Honestly. both cases are great.
Both cases are easy the slip in and out of pocket. Although slightly thicker, the Cruzerlite is still very slim. Does feel like it would offer a bit more protection in a fall. Since I have never dropped a phone my deciding factor, which might seem stupid to some people, is that the clear Cruzerlite case would get dust buildup from pocket lint and you'd visually be able to see it at the edges of the case. That can easily be fixed by purchasing a non-transparent Cruzerlite case.
The Diztronic case, my only problem with is most of the case fairly slick. What gives me a good grip on the phone is the rim of the case where you put the phone through. It's a different plastic finish from the rest of the case which is much easier to grip with your fingers. I kind of prefer it that way.
Just my opinion on these two.

DarkManX4lf said:
I ordered myself the matte black tpu from Diztronic.
Click to expand...
Click to collapse
thats my favorite diztronic color

SmokeRob said:
Nice quick review!
I gave both of these cases a fair go. Both of them I ran with for a week. I've decided to stick with my Diztronic TPU. Honestly. both cases are great.
Both cases are easy the slip in and out of pocket. Although slightly thicker, the Cruzerlite is still very slim. Does feel like it would offer a bit more protection in a fall. Since I have never dropped a phone my deciding factor, which might seem stupid to some people, is that the clear Cruzerlite case would get dust buildup from pocket lint and you'd visually be able to see it at the edges of the case. That can easily be fixed by purchasing a non-transparent Cruzerlite case.
The Diztronic case, my only problem with is most of the case fairly slick. What gives me a good grip on the phone is the rim of the case where you put the phone through. It's a different plastic finish from the rest of the case which is much easier to grip with your fingers. I kind of prefer it that way.
Just my opinion on these two.
Click to expand...
Click to collapse
Agreed. I think this cases are so similar but so different at the same time. Best part is that buying one of each won't hurt your pocket at all
Sent from my SGH-T999 using xda premium

I'll add my 2 cents even though I can't do an apples to apples comparison. I was never a fan of protective cases, I never used them with my Samsung Fascinate in the 2 years that it was my primary device. That was until the screen broke on my 3 month old SGS3.
While Samsung was repairing my phone, I did some research and decided on a Diztronic matte dark blue case. It's a great quality product. The TPU material is thin but pretty stiff and the fit on the phone is tight, removing the case causes the battery cover to get unsnapped 90% of the time. The cutouts are perfectly positioned (although I would actually prefer covered lock/power and volume buttons, read on). The matte finish actually makes the cover a little more slippery both in hand and when sitting on other surfaces, but I perfer the way the case looks. Also the case has a solid company behind it, when my case arrived, I noticed it the color was actually back and not dark blue. I emailed customer service at Diztronic and they let me know that their latest batch of dark blue covers were in fact darker than earlier batches. They sent me one from an earlier batch at no cost.
In the meantime, I acquired a CruzerLite gloss black case for my Fascinate. The TPU material is a little bit thicker and more flexible than the Diztronic. The case also fit looser than the Diztronic although there is no risk that the cover will fall off when being removed from a pocket like silicon cases. The lock/power and volume buttons are covered (raised and appears to be the same thickness as the rest of the case), but I had no issue using them. The cutouts are in the right places, but there is an extra cutout on the case on the side that does seem to have any reason for being there (maybe another phone shaped like the Fascinate has a use for it). The gloss finish is pretty sticky, especially when the phone is sitting on something smooth. I had no concerns leaving the phone sitting on the leather passenger seat in my car when driving. I would rate this case one step below Diztronic in terms of overall quailty, but will keep on using it as my Fascinate is now being used as a game system for my kids.
I also wound up buying a no-name TPU case (from Amazon) for a Pantech Burst I recently bought (from eBay). While the overall quality of the case leaves something to be desired compared to either the Diztronic or CruzerLite, it does have one feature I wish both the Diztronic and CruzerLite cases had. The lock/power and volume button on the case is covered, but the material in those locations is both raised and significantly thinner than the rest of the cover. IMHO this is the way to go for these buttons.
Hope this helps folks figure out which case to get.

I just got the Diztronic yesterday and I am quite pleased. Nice fit, nice feel, nice look. I even used the screen protector that came with it and it's not half bad.

Just dropping my 2 cents. The diztronic for the matte/clear model.. it gets rather dirty easily so if you happen to get your hands dirty regularly and need to use the phone. Just know the clear will start to change color.

arctic84 said:
Just dropping my 2 cents. The diztronic for the matte/clear model.. it gets rather dirty easily so if you happen to get your hands dirty regularly and need to use the phone. Just know the clear will start to change color.
Click to expand...
Click to collapse
Agree with this 100%. I used the case for 3 months then threw it away cause it got so dirty and ugly.

Disappointed with my SGP Spigen Neo Hybrid Case

So after seeing pictures of it for a while and finally seeing peoples reviews for the case i finally bought the infinity white case. I already had a couple of ebay cases while i was waiting to get something a little more "premium" so i pulled the trigger on the Neo Hybrid. I received it today and have to say it is not what i expected.I already knew about the buttons being too sensitive and the case being more purple than blue so no surprises there, but being advertised as a tpu case i thought this would fit the phone much more tightly the way every tpu case ive ever bought off of ebay for $2 has felt. the tpu portion of the case was either made too large or from a different kind of material because it feels loose on the phone to me. the bumper that goes around the case is meant to keep the tpu tight to the phone, and perhaps add another layer of protection but it tpu along the front of the screen feels very loose and is even a bit sharp to the touch because of its square shape. this is the case i had been using for the past month and i loved the feel, but not so much the look of it. I actually couldnt decide which color i wanted and bought the orange one as well a couple of days ago and it looks like ill be sending them both back in favor of my $4 ebay case.
http://www.ebay.com/itm/Black-PC-TP...670415?pt=PDA_Accessories&hash=item1e6f7fe08f

Just a quick question, did you get the Neo Hybrid Lumi or the Color?

it was the color series with the purple/blue case and white bumper frame, now i have an orange lumi on order and i can only assume it is going to have the same feel to it. way more bummed about how loose the case feels and the way the rim around the screen is really jagged feeling and not rounded at all.

I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger

King Shady said:
I've got an orange Lumi coming in today, I'll post anything if it disappoints. They looks so damn good in the pictures, especially with the white GS3. I just had to pull the trigger
Click to expand...
Click to collapse
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof

I don't have one yet but I am very disappointed in the colour selection. How can you not have a black/black like all the others before it? The old ones never sagged on me so I personally want a black/black with the good old silicon and polycarbonate frame.
Don't see it happening though.

SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app

misha25 said:
the case looks nice but be ready not to use it or modify it so the buttons work. I already emailed them and sent pics in. The little bumpers are way to high so it causes the sensitivity to go through the roof
Click to expand...
Click to collapse
I emailed them about the button issue too. They seem to know about it and said I'm getting an updated version of the Color in mid-August.

lsv-1 said:
SGP products suck in terms of "fit", I had an ultra thin air for my SII, the worst case ever, since then I decided not to purchase sgp again.
Case Mate for the win!!! Very recommended!!! Great quality and fit!!!
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
I ordered their leather pouch because I seriously loved their screen protectors. The pouch was so tight I had to use a razor blade to cut the seams to remove my phone. The pull tab broke off as I was trying to remove my phone with it.

i think theres something to be said for mass producing cases. all the generic ebay tpu cases seem to fit perfect, havent had an issue yet. they all fit nice and snug, cutouts are perfect, the buttons arent as tactile and clicky as more expensive cases but theyre still easy to press

I agree with the OP, I got the neo hybrid lumi in green and I think that this case just feels cheaply made, this is definitely not worth paying $26. My cheap tpu case I got off eBay for 3 bucks is 100 times better than this. The camera cut off holes for this aren't even properly aligned and the case does not fit the phone very well. And also with the issue with the buttons. I highly suggest that no one should buy this case. It's a terrible case and cheaply made and over priced. I'm disappointed with the way this case turned out. I put a bad review on SGPs website to warn other buyers but they would not even post my review. Screw you SGP lol
Sent from my SGH-T999 using xda app-developers app

Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.

Yonatanl2 said:
Was waiting for a review like this... really unsure if to order it.
How bulky is it in comparison to the Incipio Sillicrylic? I can't decide between the two.
Click to expand...
Click to collapse
I highly suggest you go with the incipio case. The Sgp case is not worth it.
Sent from my SGH-T999 using xda app-developers app

Hey Angie have you had any other cases for your gs3? If you notice while the case is on the phone the bit that runs around the edge of the screen can be moved very easily. The band is what makes the case stick to the phone and difficult to take off. My dislike is with the actual tpu case. Which is much more flimsy and soft than most tpu cases

no the band is the only thing that fits the phone well, im referring to the bit on tpu that sticks out past the band around the edge of the front glass, if you nudge it at all its very lose and also is very angular and uncomfortable to touch

angie4u said:
that is so weird because i have no issues with the cameras and holes not aligning with the cutouts, as you can see from the pictures. And the fit is very snug. This is my first SGP case purchase so did I just get lucky? I haven't use the Incipio so I cant compare the two but in terms of bulkiness, I don't find this to be bulky at all. it's very thin and sleek. However, if you are looking for something that's very durable, this might not be the case for you.
Click to expand...
Click to collapse
Yeah I think you did get lucky, because the cut out on mine was not even centered like how it is with yours. The holes on mine came down more to where the camera, lights and speakers are. And in the front, the top part of the tpu covered the silver bezel but hardly covered the bottom part. Close enough to where it looks like the tpu was sagging. I was so pissed that I literally wanted to cover the case in gasoline and burn it for how ****ty, it was lol. I honestly think that the feel of the case just feels so cheap. I have a few other tpu cases I purchased on eBay at a much cheaper price that felt more of a high quality than that piece of crap that sgp made lol. But alas, I returned it back to sgp with an e-mail stating that they did a piss poor job with the case lol.
Sent from my SGH-T999 using xda app-developers app

I guess I'm another of the lucky ones. My cutouts fit perfect, and I have no issues (besides the whole oversensitive buttons issue) but I can relate to the whole "looseness" thing.
As far as TPU cases go, the NeoHyb is definitely not cut to be "tight-fitting" like the some of the other TPU cases I've seen. Without the band, the TPU base IS loose fitting.
With the plastic band though, the entire assembly is tight enough that any attempts to pull it off usually takes the battery cover along with it.
Also, the TPU is more pliable and softer then most other TPU cases I've seen, which makes the "loose" feeling even worse, but I take it it's made that way for better impact absorption.
It's definitely not soft and stretchy like silicone though, which I hate.
So, is the NeoHybrid a perfect case? No. The plastic band is too thin, too slippery. The TPU back is not rough enough. The buttons don't really work without modifications. The TPU rim around the screen, as the OP said, feels "sharp" enough out of the box to be slightly uncomfortable.
Yet, for some God forsaken reason, I like the bloody bugger and I think 20 odd dollars is a fair price for it - considering I've dropped the phone a couple of times already and the case has been doing what it's paid for with aplomb.
YMMV though.
I DO have the Incipio Faxion - another TPU/Polycarb hybrid case I've seen out there - on order though, and plan to do a comparo as soon as it arrives.
Considering I got both at around the same price, it should be an interesting comparison.

I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.

Tomatoes8 said:
I think people are being unreasonable here. This case isn't supposed to be as hard as other TPU cases. That is why there is a polycarbonate hard frame. The whole design philosophy of the Neohybrid is super soft inside with hard shell structural support. I am glad they went for the silicon feel.
The capdase soft jacket feels basically like silicon for anyone going for that type of case. The modello is quite hard by the way. Almost as rigid as a hard snap on shell.
Click to expand...
Click to collapse
Doesn't feel super soft to me.
Sent from my SGH-T999 using xda app-developers app

angie4u said:
did you check if the reseller was selling genuine SGP product? because i almost got a GLAS.t screen protector from a site that was selling it like.. $8 cheaper than SGP but I wasn't sure so I emailed them.. they told me they were fake. maybe it was poorer quality because it was imitation.. but it boggles my mind why anyone would want to imitate $30 items...
Click to expand...
Click to collapse
I ordered it straight from SGP when they were doing the pre orders. So I'm pretty sure it's genuine unless they're lying and are just making some fake products. They gave me my money back though so it's all good. I'm pretty sure those cheap imitations probably turned out better than their genuine product lol.
Sent from my SGH-T999 using xda app-developers app

Case Review - Cruzerlite Spi-Force

Case Review – Cruzerlite Spi-Force
I was recently contacted by Cruzerlite asking if I would review a case for them. I decided to go outside of my comfort zone (TPU cases) and review a case made for protection.
For disclaimer purposes, let me start by saying I despise Otterbox and other bulky cases. I think they take away from the design of the phone and make the phone too bulky. Fortunately, I was pleasantly surprised when I opened my new Spi-Force case and put it on. The first thing I noticed was the build quality. This case is a two-piece case made of TPU and Polycarbonate and everything feels very sturdy. The white part is TPU (which we all know shows dirt after awhile) while the black part is the Polycarbonate. All ports line up perfectly and the cutouts for the back are spot on. This is something that bothers me on other cases (holes cut too big – off centered) so I was very happy when everything lined up here.
Obviously, I put the white part on first --- immediately noticing that I could rock this case without the black piece. It looks better and fits like a glove, however you lose the added protection and the kickstand. Speaking of the kickstand, it’s definitely one of the better ones I’ve tried. You won’t be able to use it vertically, but it works like a champ horizontally. The kickstand is very sturdy (made of polycarbonate) and it locks into place. I tried a Casemate case with a kickstand and this Cruzerlite one kicks it to the curb.
The front part of the case has a nice lip, so you can set your phone down and your screen will be lifted. On Cruzerlite’s website, they do have a drop test to show you how durable this case is. Needless to say, I came away very impressed.
Here is why I like it better than the Otterbox Commuter (the only one I considered buying):
*Not a lint trap
*Not slippery (has a great grip in the hand)
*Better design (IMO) and has many different color options
*Doesn’t feel as bulky in hand or pocket
This is a case I would actually rock on a daily basis, which is huge considering I hate anything other than TPU. To anyone who works construction or a similar trade that needs protection, I would recommend giving this a shot if you aren’t too keen on Otterbox or other companies. It’s a good price ($20) and by viewing the drop test, you can see how durable this case is -- not to mention the better grip and resistance to lint.
Let me know if you have any other questions!
***Drop Test: http://youtu.be/VhCkMS4GHOQ
***Link to site: http://www.cruzerlite.com/cases/samsung/galaxy-s-iii/cruzerlite-spi-force-for-samsung-galaxy-s-iii
Sorry I can't post any other pics. I'm running AOKP build 3 and my camera hates me

Ok.. but it's ugly. As hell.

ingenious247 said:
Ok.. but it's ugly. As hell.
Click to expand...
Click to collapse
Agreed

Lol.
Not NEARLY as ugly as some other protection cases. I guess it's a matter of opinion. I don't need puke orange mixed with bile green for a case

1ManWolfePack said:
Lol.
Not NEARLY as ugly as some other protection cases. I guess it's a matter of opinion. I don't need puke orange mixed with bile green for a case
Click to expand...
Click to collapse
Thanks for this review, man. I've been stuck with some crappy INCIPIO case that I bought when I got the S3 on release day. (Verizon sucks at keeping Samsung accessories in stock.) NO GRIP on that damn thing...which is something I need where I work.
I've been looking for a good case that has GRIP. This appears to be "the one". Looks cool, too. (IMO.) The little stand in the back is a huge bonus.
Thanks for the info. You hit all of the important key points instead of making some stupid, long-winded, drawn-out review.