Related
I've tried the following ROM and I ended up using ArpegGioMod 0.8 with Link2SD now.
SimplyGio 1.3
CyanogenMod 7.1 KANG (RC-3.0)
Cy4noobsMod-7.1.3.1
ArpegGioMod 0.8
I'm using cyan kang RC 3.0, phiexz
little confuse,, However still remembering my former rom, Particle, by hyriand
the former has wifi problem, but the music player n effect was excellent, and also no problem, except mount warning issue...
the RC 3.0 I'm using now is promoted to be having wifi worked,,,
but I never found this rom that way, Im stucked to decide which way should I...
hi, what about your rom,,,
can u describe and tell about those following roms by your opinion???
SimplyGio 1.3
Pretty stable and supports other language, my dad has been using it on his Gio for over a month now.
CyanogenMod 7.1 KANG (RC-3.0)
I had some issue with GPS and split camera screen, other than that it has been pretty good and I used it for about 3 weeks between RC2 and 3. I'll probably go back to this again later.
Cy4noobsMod-7.1.3.1
Had some issue with market and S2E but didn't spend too much time on this ROM.
ArpegGioMod 0.8
Having some problem with Link2SD now and I'll try the 0.8.1.1 boot and dtapps2sd later.
I'm choosing between ArpegGioMod and CM 7.1 RC3 depending on what dtapps2sd is like on the ArpegGioMod.
For your wifi problem, did you load the modem file when you load the Particle ROM?
I am using CyanogenMod 9
Im am using Cyanogenmod 7.2 because in Cyanogenmod 9 im stuck in Bootloop every time i try (i probably tryed it more than 10 times)
PS: Sorry for my bad english, im from Germany
CM 7.2, FTW
Im using te BNC rom
Sent from my Gio GT-S5660M using XDA App
Walter1997 said:
Im am using Cyanogenmod 7.2 because in Cyanogenmod 9 im stuck in Bootloop every time i try (i probably tryed it more than 10 times)
PS: Sorry for my bad english, im from Germany
Click to expand...
Click to collapse
Germany and M model ??
Tried wiping data, mount system before etc??
Sent from my GT-S5660 using xda premium
I've had success with cm7.2, cm9 and arpegiomod.
I am currently using cm7.2 because it's the one I find to be the most stable of the bunch. CM9 is quickly catching up though, looking forward to using it full-time in the near future
I'll be making one...
I've used:
Cm7.1 didn't use very long
Cm7.2 most stable custom ROM for me
ArpegGioMod 0.8 best ROM based on stock for M.
Particle ROM worked great for me as long as you preserve your baseband. Second best stock ROM for M. Kernel works great for overclocking and scripts.
Sent from my GT-S5660M using XDA App
I use this ...
particle.blurringexistence.net/samsung-gt-s5660/roms
I'm now using GioPro v1.4 and yesterday I've used CM9..
CM9 is good enough, but the battery life isn't so good..
GioPro 1.4, but I'm going back to SimpliGio, or maybe see if I can get CM7 or CM9 working.
The problem is, I was a newb and flashed by modem. Now I can't connect to Virgin/Bell (ie no SMS, phone calls, nothing).
Anybody know where I can either get a stock modem for the GT-S5660m or stock firmware for it and extract the modem? Most of the "official" firmwares I've seen have been for the non-m model only.
Go to sammobile.com
Sent from my GT-S5660 using xda premium
voetbalremco said:
Go to sammobile.com
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
In Firmwares, right?
I only see for the GT-S5660 non-M model. And a GT-S5660V version? What's that?
Edit: Nvm, it's for Oceania.
If you see regular thread, search for something with MUG baseband, its also for M model
Sent from my GT-S5660 using xda premium
If you see regular thread, search for something with MUG baseband, its also for M model,
Sent from my GT-S5660 using xda premium
I don't entirely understand your post. Do you mean search the site itself or the forum?
And what, exactly, would I search? "MUG baseband"?
Should I just make a new topic? Don't want to take over this thread...
Also, my phone is confused. I just tried flashing the GT-S5660 firmware at sammobile, and my phone shows it as being GT-S5660L. Is that because of the firmware or is that really my model number?
I meand to say this
[25.07.2011][Android 2.3.4]
http://forum.xda-developers.com/sho...[ROM] S5660MUGKG3 [25.07.2011][Android 2.3.4]
This is a stock rom for s5660m, newest if im not wrong
Sent from my GT-S5660 using xda premium
【GUIDE】[ROM Transplant ]2nd-boot rom with stock kernel support (updated)
【Before the guide】
Hi, it is my first time to write here and share my methods with you guys. So please show me your encouragements.
【What am I doing】
The reason why I want to transplant the kernel on defy is, I am now studying the multiboot feature. My main system is stock 2.3.6 so the 2nd-init rom like Quarx CM10 4.1.2, AOKP 4.1.2, new SlimBean, etc. cannot boot. ALTHOUGH you can directly change some older roms' kernel.
【Aim】
NOW with this method you can get your 2nd-boot ROM work on stock kernel as well.
【Step】
Now follows the method. You'll make this manually on your PC or Android devices. TAKE AOKP FOR EXAMPLE
【Simple-transplant】
1.Extract an older ROM of 4.1.1 that can boot on stock kernel. Copy /system/app, /system/framework , /lib/libandroid-runtime.so and prepare to transplant.
2.Extract 2nd-init ROM of 4.1.2 AOKP .
3.Copy files copied above to 4.1.2 's folder and replace those three parts.
4.CHECK IF THE BOOTMENU FOLDER'S FILES ARE THE SAME AS 4.1.1, OR you won't have your multiboot.
5.Compress and sign your ROM, Enjoy!
(Sign your rom using signapk or other tools that can be found in the forum. IF you are dong this using your PHONE, Zipsigner2.apk is recommended.)
【Advanced-transplant】
-for the brave, can keep more new features of original 4.1.2 and get multiboot compatible.
TO BE UPDATE' NOT FINISHED
【Help】
Any Question you can leave message below or PM me. You can also find me on bbs . mfunz .com @ twsk
Sent from my DEFY using xda app-developers app
No reply? So upset…
Sent from my IdeaTab A1107 using xda app-developers app
well well well, does anybody know Quarx's 4.2?
Sent from my IdeaTab A1107 using xda app-developers app
So this way we can downgrade the new custom kernel found in 2nd boot CM9/10 roms, to older stock kernel, to get multiboot compatibility. But isn't the custom kernel the main feature and advantage of 2ndboot builds?
Sent from my Defy green lense using xda-developers app
If you insist on using a more stable main system and multiboot feature, you cannot use 2nd boot kernel, since it doesn't work on stock ROM.
Sent from my DEFY using xda app-developers app
Right. By this way you may lose some of the features of 2nd boot kernel but NOT ALL. Well, because i am using stock China edition as my main system . It is more powerful in video playing, like playing RMVB films using HW. But I can try the 4.1.2 Jelly Bean because of the kernel. And Q's kernel still has bugs, therefore i share this method to help those in need.
Sent from my DEFY using xda app-developers app
Yes, video playback is definitely better on GB, as the HW decoder doesn't work on JB! I would love to see GB roms with custom kernel, to see how we could improve the already outstanding performance
Sent from my Defy green lense using xda-developers app
Haha, sure , If custom kernel can work on stock GB, all problems will be solved.
Sent from my IdeaTab A1107 using xda app-developers app
UPDATE the guide today.
Sent from my IdeaTab A1107 using xda app-developers app
Hey guys, after searching several thread about Good Battery life Kernel, i concluded that Cow kernel is the saver one. Is it right?. And, Is my Bagux ROM suitable for Cow Kernel?.
Sent from my GT-I8150 using Tapatalk 2
well,it maybe suits well for you..
however, i am on cmb4, and battery here is just so good..
how bout rocking upgrade your W?
-salute!
Sent from my GT-I8150 using xda app-developers app
Any custom kernel should be compatible with any custom rom, as long as the Android version is correct.
Ya..
Sent from my GT-I8150 using xda premium
And guys, what if we get bootloop/brick our hh bcause flashing a kernel?. How do we recover again?. Does it just re-flash the cusrom?.
Sent from my GT-I8150 using Tapatalk 2
Nanomite21 said:
And guys, what if we get bootloop/brick our hh bcause flashing a kernel?. How do we recover again?. Does it just re-flash the cusrom?.
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
Yup, or a stock, whatever you prefer flashing. To prevent bootloop/brick make sure you flash a kernel that supports your android version and read the rom's posts to see if it works completely with the kernel. Had a problem with the JB kernel and our JB MIUI, home kept foceclosing and such, but coliv_aja fixed it and posted a compatible version for the rom.
Edited: Is there any kernel for ics cm9 that we can flash?
Because i had few problems with kernel when changing frequencies etc.
First off, CM10 isn't ICS, it's JB aka Jellybean, ICS is CM9 (Android 4.0)
What kind of problems were you having?
Re: [Q] ICS cm10 kernel
O really i wrote that lol i thought cm9. Was bit in rush. I had like freq. Stay on max or on same freq when changing governor...
Sent from my HTC Wildfire using xda app-developers app
massofsin said:
O really i wrote that lol i thought cm9. Was bit in rush. I had like freq. Stay on max or on same freq when changing governor...
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
Well i also had issues with JB overclocking..
Odp: [Q] ICS cm9 kernel
Hmmm, maybe nfinity play (;
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
flash player
What is the best flash player for my HTC WILDFIRE?
http://d-h.st/Qto I uploaded the infinity play kernel for anybody needing it.
Sent from my GT-I8190 using xda premium
Yey will try it thank you
Sent from my Wildfire using xda app-developers app
Sorry I read this wrong. I thought that it was for a CM7 rom. If I'm correct I don't think your wi-fi is going to work. All you need to do is either flash another kernel or factory reset
Sent from my GT-I8190 using xda premium
CaseyS said:
Sorry I read this wrong. I thought that it was for a CM7 rom. If I'm correct I don't think your wi-fi is going to work. All you need to do is either flash another kernel or factory reset
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
ohkey Didnt flash anyway
It works very well in CM7 rom but as you said you want a kernel with good battery life and the infinity play is a bit of a drainer but you can always tweak those settings for a better battery life.
Sent from my GT-I8190 using xda premium
CaseyS said:
http://d-h.st/Qto I uploaded the infinity play kernel for anybody needing it.
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
My wifi is not working after flashing this kernel on Orion Rom by Wasimk32.
It just wont switch on.
Somebody Help, a noob here.
it won't work because it is created only for GB roms. kernel included in ics roms is the best so far...
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
No problem!
shavir Afroz said:
My wifi is not working after flashing this kernel on Orion Rom by Wasimk32.
It just wont switch on.
Somebody Help, a noob here.
Click to expand...
Click to collapse
If you want to revert to your old kernel, search for the zip you flashed (of your rom), take out boot.img and paste it into your adb/fastboot folder, reboot your buzz to bootloader, connect to pc and get a fastboot usb status on your bootloader, check connection with pc with cmd -
HTML:
fastboot devices
If it's recognized, head over and type
HTML:
fastboot flash boot boot.img
Else, if you have a nandroid backup of when you started using the rom, head to advanced restore and restore the boot partition.
Hi all, I am new to this phone and have unlocked my bootloader, rooted, and installed lupas kernel v6. I have some questions, and have tried to find answers but am coming up empty. 1. My wifi will not connect, if there a fix? 2. I can't download anything with the stock browser, it immediately fails. Fix? 3. Is there A good daemon to control over clocking? 4. Any opinions on which room to install? I'm currently on 2.3.3 stock. Thank you so much, I am no noob but new to this phone and look forward to being an active part of this community.
Sent from my R800x using xda app-developers app
jeremytn86 said:
Hi all, I am new to this phone and have unlocked my bootloader, rooted, and installed lupas kernel v6. I have some questions, and have tried to find answers but am coming up empty. 1. My wifi will not connect, if there a fix? 2. I can't download anything with the stock browser, it immediately fails. Fix? 3. Is there A good daemon to control over clocking? 4. Any opinions on which room to install? I'm currently on 2.3.3 stock. Thank you so much, I am no noob but new to this phone and look forward to being an active part of this community.
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
There aren't many gb roms for r800x they are all stock based but if you want ics or jb I would recommend cm9 for ics or slim bean or pac rom for jb. A gooz stock based gb rom is gin2 blur but id wait till the 22nd for that one because there will be a new update
Sent from my r800x using xda developers app
abdel12345 said:
There aren't many gb roms for r800x they are all stock based but if you want ics or jb I would recommend cm9 for ics or slim bean or pac rom for jb. A gooz stock based gb rom is gin2 blur but id wait till the 22nd for that one because there will be a new update
Sent from my r800x using xda developers app
Click to expand...
Click to collapse
Yeah I tried that, had the same problems though, and also every time I rebooted my user installed apps would start disappearing, leads me to think some of my problems must be kernel related. I want a gingerbread one, hows cm7? Does ask the gaming stuff asstill work with it?
Sent from my R800x using xda app-developers app
jeremytn86 said:
Hi all, I am new to this phone and have unlocked my bootloader, rooted, and installed lupas kernel v6. I have some questions, and have tried to find answers but am coming up empty. 1. My wifi will not connect, if there a fix? 2. I can't download anything with the stock browser, it immediately fails. Fix? 3. Is there A good daemon to control over clocking? 4. Any opinions on which room to install? I'm currently on 2.3.3 stock. Thank you so much, I am no noob but new to this phone and look forward to being an active part of this community.
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
hi there, first of all is this the version you are using LuPuSv6-GB-LiNaRo.img? because if so the wifi modules should be built in already, it also has a zip file that you can flash on the original post that will fix the wifi issue if not fixed i suggest go back to his original post http://forum.xda-developers.com/showthread.php?t=1849536 and start from scratch. on rom to install if you want gaming theres jokawild and auroraplay if you want eye candy ui and pure smoothness theres gin2jellybean, there are also other good roms some for ics.. hope this helps a bit
jeremytn86 said:
Yeah I tried that, had the same problems though, and also every time I rebooted my user installed apps would start disappearing, leads me to think some of my problems must be kernel related. I want a gingerbread one, hows cm7? Does ask the gaming stuff asstill work with it?
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
Cm7 doesn't support touchpads. So you should flash lupus gb/ics its newer than lupus v6 and after flashing.make sure you wipe everything before installing new rom. But for gb id recommend gin2blur or uk rom but I prefer gin2blur. Its razr themed but.if you search ATTACKS themes you can flash whatever one you want because they're all smooth and for r800x
Sent from my r800x using xda developers app
fritzbored said:
hi there, first of all is this the version you are using LuPuSv6-GB-LiNaRo.img? because if so the wifi modules should be built in already, it also has a zip file that you can flash on the original post that will fix the wifi issue if not fixed i suggest go back to his original post http://forum.xda-developers.com/showthread.php?t=1849536 and start from scratch. on rom to install if you want gaming theres jokawild and auroraplay if you want eye candy ui and pure smoothness theres gin2jellybean, there are also other good roms some for ics.. hope this helps a bit
Click to expand...
Click to collapse
Yes they'd the one but I don't remember sting anything about wifi fix in the op but I'll look again, I'll look up those roms that were mentioned, sorry this is all new to me, I'm used to htc and being able to wipe system and install a kernel from recovery and not have to worry about bands and recovery and such, thanks for the help? What about the download issue with the stock browser?
Sent from my R800x using xda app-developers app
abdel12345 said:
Cm7 doesn't support touchpads. So you should flash lupus gb/ics its newer than lupus v6 and after flashing.make sure you wipe everything before installing new rom. But for gb id recommend gin2blur or uk rom but I prefer gin2blur. Its razr themed but.if you search ATTACKS themes you can flash whatever one you want because they're all smooth and for r800x
Sent from my r800x using xda developers app
Click to expand...
Click to collapse
Thanks for the info and suggestions
Sent from my R800x using xda app-developers app
Just flashed the wifi fix, just hangs at obtaining ip address still, sucks...
Sent from my R800x using xda app-developers app
jeremytn86 said:
Just flashed the wifi fix, just hangs at obtaining ip address still, sucks...
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
Try using doomkernel I'm using it now and the wifi works fine. Also don't forget to wipe everything after flashing a new kernel that might be the problem.
Sent from my r800x using xda developers app
abdel12345 said:
Try using doomkernel I'm using it now and the wifi works fine. Also don't forget to wipe everything after flashing a new kernel that might be the problem.
Sent from my r800x using xda developers app
Click to expand...
Click to collapse
That was probably it, and by wipe e every thing, you mean data, cache, and dalvik? Does wiping data remove recovery? And I need to do this AFTER I flash the kernel and not BEFORE?
Sent from my R800x using xda app-developers app
jeremytn86 said:
That was probably it, and by wipe e every thing, you mean data, cache, and dalvik? Does wiping data remove recovery? And I need to do this AFTER I flash the kernel and not BEFORE?
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
Yes, and do it after flashing kernel because system partition sizes are different for each.kernel. and Wiping data does not remove recovery because its built in the kernel.
Sent from my r800x using xda developers app
abdel12345 said:
Yes, and do it after flashing kernel because system partition sizes are different for each.kernel. and Wiping data does not remove recovery because its built in the kernel.
Sent from my r800x using xda developers app
Click to expand...
Click to collapse
There is no wipe system option, that's a no no on this phone right?
Sent from my R800x using xda app-developers app
jeremytn86 said:
There is no wipe system option, that's a no no on this phone right?
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
Wipe system is under mounts and storage. It says format system. But you don't need to do that.
Sent from my r800x using xda developers app
abdel12345 said:
Wipe system is under mounts and storage. It says format system. But you don't need to do that.
Sent from my r800x using xda developers app
Click to expand...
Click to collapse
Thanks again for all the help buddy,
I know how it is to answer question after question, I'll have access to a computer again soon and I'm gonna pull all files and dig and try to build some stuff for this, sony has released full source have they not?
Sent from my R800x using xda app-developers app
jeremytn86 said:
Thanks again for all the help buddy,
I know how it is to answer question after question, I'll have access to a computer again soon and I'm gonna pull all files and dig and try to build some stuff for this, sony has released full source have they not?
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
Your welcome and yep sony has released all the source. It'd be nice to see some more developers for the r800x of xperia play.
Sent from my r800x using xda developers app
im in need of some help
abdel12345 said:
Your welcome and yep sony has released all the source. It'd be nice to see some more developers for the r800x of xperia play.
Sent from my r800x using xda developers app
Click to expand...
Click to collapse
i have just purchased an xperia play r800x from my local retail, my carrier is Appalachian Wireless, not verizon, my phone is stuck on 2.3.3, and i really want to update to ICS but im really not sure what to do, i paid the $15 fee to get my bootloader unlocked from alejandrissimo, nice guy i might add, and im really needing some guidance on were to go now, any help would be awesome, and im sorry to jump this thread but i really didnt think the forums wanted 3 or 4 post of noob questions like mine, i dont want to mess my phone up and i dont have insurance on it, thanks in advance
First you need to download the fastboot files from sonys website. Then find an ics kernel for play. Id recommend lupus. Then download an ics rom and put it on your sd card. Next put the kernel in the fastboot folder and shut down your phone and plug it in while holding the search button. Next type in the command for flashing the kernel in a command window (not sure what it is off the top of my head search in one of the kernel threads. Then unplug your phone and enter recovery.by powering on and pressing volume down. Choose install and pick the rom from your sd card. For more detailed instructions search how to flash rom ls and kernels. There are plenty of guides.
Sent from my r800x using xda developers app
abdel12345 said:
First you need to download the fastboot files from sonys website. Then find an ics kernel for play. Id recommend lupus. Then download an ics rom and put it on your sd card. Next put the kernel in the fastboot folder and shut down your phone and plug it in while holding the search button. Next type in the command for flashing the kernel in a command window (not sure what it is off the top of my head search in one of the kernel threads. Then unplug your phone and enter recovery.by powering on and pressing volume down. Choose install and pick the rom from your sd card. For more detailed instructions search how to flash rom ls and kernels. There are plenty of guides.
Sent from my r800x using xda developers app
Click to expand...
Click to collapse
ok i have flashed the lupus kernel with ICS, i then tried to install CM9 and it error 7's on me, im not sure what CDMA roms i can use with this kernel? would you please give me a hint as to what roms i should be looking for ? i used cyogenmod on a nook color a while back and my wife loves it, so i thought i would give 9 a shot on my PLAY lol
lilkuz2005 said:
ok i have flashed the lupus kernel with ICS, i then tried to install CM9 and it error 7's on me, im not sure what CDMA roms i can use with this kernel? would you please give me a hint as to what roms i should be looking for ? i used cyogenmod on a nook color a while back and my wife loves it, so i thought i would give 9 a shot on my PLAY lol
Click to expand...
Click to collapse
Download cm9.1 from cyangon mods official website. Then try installing it using lupus jelly bean kernel. It has a setting for aosp ICS and should work for cm9. But if you want to play games on your play you should stick to GB ROMs because they are smoother than on ICS.
Sent from my r800x using xda developers app