This thread intends to be the support thread for CM10 Android 4.1.1 for the Defy(+) ROM made by Quarx (http://forum.xda-developers.com/showthread.php?t=1768702) and Epsylon3. All the credit for this build goes to the usual suspects: Quarx, Epsylon3, maniac103, nadlabak...
- Download links: Quarx - Epsylon3 (Only Defy/mb525 at the moment)
- Kernels: GB - Froyo
- Gapps (Google Apps): http://goo.im/gapps/ - Minimal Gapps (Gmail, Market, Gtalk, Synchronisation): http://quarx2k.ru/gapps-jb-20120726-minimal.zip
- Mirrors: http://download.galatics.ro/galatics/diverse/CM10/ - http://www.longren.org/cyanogendefy/
Working: Almost everything!!
TODO: data connectivity bug affecting both CM9 and CM10, DLNA/UPnP...
Installation instructions:
- Download gapps (latest jb version) or Minimal Gapps (for those with space constraints in /system partition):
* If you have Defy red lens or Defy+:
- Download latest image at: http://quarx2k.ru/cm10-nightly-defy+/ (Thanks to Quarx)
- (Only for Defy red lens) Download GB kernel (Thanks to Epsylon3) (Defy+ owners won't need this as it's the one that came preinstalled)
- (Only for Defy red lens) Download the Defy Red Lens Battery Fix (it's only needed for new installations, because if you're upgrading to a recent version auto-backup feature will keep it). * If you have Defy green lens:
- Download latest image at: http://quarx2k.ru/cm10-nightly-defy/ (Thanks to Quarx) or http://defy.wdscript.fr/defy-cm10/ (Thanks to Epsylon3)
- Download Froyo kernel (Thanks to Epsylon3)- Reboot into recovery
- Wipe data/factory reset
- Install the kernel
- Install CM10
- Install Gapps
(If you have Defy red lens) - Install battery fix- Wipe cache
- Wipe dalvik cache
- Reboot
First boot takes its time, so be patient.
Known problems and fixes:
- GPS:
Go to Settings -> Location services, uncheck and re-check "Google's location service"
kur41 said:
* If you have Defy red lense or Defy+:
- Install battery fix
Click to expand...
Click to collapse
Battery Fix on Defy+..????
guddu2011 said:
Battery Fix on Defy+..????
Click to expand...
Click to collapse
Fixed in the OP (post is based in my experience with Defy red lense, so OP will be updated with further improvements).
kur41 said:
- To be able to install some apps that require writing to SD, you'll need to download make_ext4fs binary to /sdcard/Download (for example) and open any terminal emulator and:
Code:
$ su
# mkdir -p 0775 /data/app-asec/
# mount -o rw,remount /system
# cp /sdcard/Download/make_ext4fs /system/bin/
# chgrp shell /system/bin/make_ext4fs
# chown 0755 /system/bin/make_ext4fs
# mount -o ro,remount /system
Click to expand...
Click to collapse
It will be fixed in next releases ? Dont want to download and write on terminal emulator.
CM10 with Chrome
I have been using Qurax's CM9 build for a period already, yesterday, I upgrade it to CM10 build of 18-7-2012. The user experience with CM10 is excellence, however, i encountered error with Chrome. Everytime I want to launch Chrome, it replied the follow
"Critical functionality required to run Chrome is missing. Either your Chrome installation is incomplete or not compatible with this version of Android"
Chrome worked fine while I was using CM9, however not with CM10. I had tried to uninstall and reinstall from Play Store, also tried to clear cache/ dalvik cache, but nothing help.
is there anyone else also experiencing the same problem.
My device is a Defy with red lens, I use Defy+ build with 4.5.2_DHT-22_kernel.
Most certanly it will be fixed. You can also do it with a root Explorer app like solid Explorer. Really awesome how fast quarx, maniac and epy are THX for this hard Werk. It always linke a New phone
Gesendet von meinem MB525 mit Tapatalk 2
diogo65 said:
It will be fixed in next releases ? Dont want to download and write on terminal emulator.
Click to expand...
Click to collapse
According to his Github, it was fixed yesterday, so that's why I assumed it'll be.
do i have to do the factory reset if i'm flashing from cm9 gb kernel?
thanks
pemoeda911 said:
do i have to do the factory reset if i'm flashing from cm9 gb kernel?
thanks
Click to expand...
Click to collapse
I don't think it'd be needed, but it wouldn't hurt either
kur41 said:
I don't think it'd be needed, but it wouldn't hurt either
Click to expand...
Click to collapse
I tried without doing a factory reset and got stuck in a boot-loop, so will recommend it.
I noticed on the forum in the developer section that someone posted about the gallery and apollo not showing their photo's/music. I had this on CM9. I managed to fix it by navigating to my music through file explorer and getting it to play in apollo. After that all my music was listed and photo's.
OP, if you really want this thread to take off, you could collect all the problems&solutions that are mentioned in Quarx's official JB thread... That could be SERIOUSLY useful!
Not working or messed up :
-Torch in notification drawer toggles
-Some gapps builds cause double or triple apps (gallery,camera etc)
-Capacitive buttons aren't lit when the screen is on without reseting brightness
Guys that have problem with 1%battery steps :
Open /system/build.prop using Text Editor, navigate to the following line and make sure that it's the same as mine : persist.sys.one_percent_batt=1
If you can't find it, add it at the end of the prop
Tried 19.07 defy+ build. Did not have any problem with Google Apps. As expected unable to answer incoming call. Fix offered in the thread (disabling sound) did not help. IMHO CM9 is faster ATM. Google Now is cool, but gave me some FC´s.
Red lens Defy, 20th July Defy+ build by Quarx working Very Well.
Notification Power widget for 2G/3G toggle has no effect/ does not work
Settings>About Phone>Status & Settings>Wireless&Networks>ore>Mobile Networks ... No HWA
Many Many Thanks to The Developers!!!
ADOBE FLASH PLAYER STILL NOT COMPATIBLE WITH ALL MY ICS ROMs....
VERY DISAPPOINTING
ANY SOLUTION?
There would be no Flash Player support in Jellybean according to Adobe.
There is Flash Player for ICS. You can not use it with Chrome though.
SAMHUI94 said:
ADOBE FLASH PLAYER STILL NOT COMPATIBLE WITH ALL MY ICS ROMs....
VERY DISAPPOINTING
ANY SOLUTION?
Click to expand...
Click to collapse
Good for Defy
The very beginning i used this ROM, it was very fluid. I will use it, once its its ok for daily use. Thanks for Quarks.:good:
aed0101 said:
There would be no Flash Player support in Jellybean according to Adobe.
There is Flash Player for ICS. You can not use it with Chrome though.
Click to expand...
Click to collapse
I ALSO HEARD ABOUT THIS NEWS, thx!
BUT DO YOU KNOW WHY I CANT INSTALL FLASH PLAYER IN CM9 ?
Related
I'm not taking any credit for anything, i just wanna help. Credits go to the developers:
Quarx
Epsylon3
maniac103 welcome mate (we missed you)
nogoodusername for helping with bugtracking
...and others who help
***Newest version is marked with red***
Latest Froyo kernel by Epsylon3: 16 May 2012
Latest Froyo kernel by Quarx: 8 Mar 2012
Epsylon3 builds: http://defy.wdscript.fr/defy-cm9/
Quarx builds: http://quarx2k.ru/cm9-nightly-defy/
Latest GB kernel by Quarx: 11 May 2012
Latest GB kernel by Epsylon3: 16 May 2012
Quarx builds: http://quarx2k.ru/cm9-nightly-defy+/
Epsylon3 builds: http://defy.wdscript.fr/defyplus-cm9/
ICS (4.0.3) MR1 Gapps: http://goo.im/gapps/gapps-ics-20120429-signed.zip
Click to expand...
Click to collapse
CM7 (froyo) Kernel http://m.cfa.aero/misc/CM7_Kernel-signed.zip
CM9 (GB) Kernel http://m.cfa.aero/misc/CM9_Kernel-signed.zip
Click to expand...
Click to collapse
Install guide (courtesy of nogoodusername):
A How to on flashing ICS(Defy Plus Builds)
1:Head over to Stable Recovery from boot menu
2:Wipe Data (Nandroid Backup Before Doing this [optional])
3:Install Zip from SD
4:Select ur ICS(DefyPlus) zip
5:FLash
6:Flash CM9 Kernel [Note: Defy Plus users DO NOT FLASH KERNEL ZIP!]
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Flash Battery Fix(Only for Red Lens) http://dl.dropbox.com/u/29851821/ICS...tery Fix.zip
9:Clear Cache and Dalvik Cache
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash Gapps and CM7 Kernel
7:Clear Cache and Dalvik Cache
How To Update Nightlies
1:Rebot to Recovery
2:Choose Zip from SD Card
3:Select your zip
A:If U are on Nightly for Defy(Original)
~Updating to a nightly for Defy(OG)-U do not need to flash any kernel zip
~Updating to a nightly for Defy Plus-U need to flash CM9 Kernel zip and also wipe battery stats
B:If u are on Nightly for Defy Plus
~Updating to nightly for Defy Plus-No kernel flashing
~Updating to nighlty for Defy(OG)-U need to flash CM7 Kernel and wipe battery stats
4:Flash!
No Data is lost During nightly update!(Unless u do a data wipe(Duh!))
FIrst Boot will take some time...
TO CLEAR YOUR CONFUSIONS ABOUT GB KERNEL ICS AND FROYO KERNEL ICS
I have seen lot of confused user out there asking about which kernel to flash and stuff... So here u go read below...
So our beloved Awsome Developers make two types of nightlies
1-For DefyPlus(Can Also be used on Defy(RedLens))
These are the GB/CM9 kernel builds
These are found under /cm9-nightly-defy+/ folder of the servers which we have
To install these you need to follow the TuT to install ICS Defy Plus Above...
Green Lens Camera Wont work on these builds
2-For Regular Defy(Do not work on Defy plus)
These are Froyo/CM7 kernel Builds
These are found under /CM9-Nightly-Defy/ folder of the servers which we have.
To install these follow the TuT to install CM9 ICS FOR Defy stated above
3-Well there is no 3rd build(There is The MileStone2 Port by Walter79,But now that we have camera on our builds that one is not usefull...)
Click to expand...
Click to collapse
+ICS bugs (all kernel versions) http://forum.xda-developers.com/showthread.php?t=1381887
Doesn't Work (not supported yet):
-Panorama
-HWA a bit buggy
Click to expand...
Click to collapse
If you find any bug please post it here: http://forum.xda-developers.com/showthread.php?t=1381887
If the bug is specific to this kernel version please post it in this thread.
CM9 Music app (delete Music.apk from system/app, reboot, then install this):
1.http://goo.gl/CckWp Music.apk
Click to expand...
Click to collapse
How to dual boot (guide):http://forum.xda-developers.com/showthread.php?t=1375156
Click to expand...
Click to collapse
Changelog
Changelog:
Code:
[B][I]14-May-2012 - Epsylon3[Froyo]:[/I]
[/B]-boosted governor and sio sheduler option in boot menu
-new cm icons
[B][I]14-May-2012 - Epsylon3:[/I]
[/B]-HWUI video fixes
-Recovery repeat keys
-Bootmenu touch fixes to fix multiboot
[B][I]13-May-2012 - Epsylon3:[/I]
[/B]-fix shaders for chrome/opera
-new baseband switch UI
official:
-HWUI fixes
-Recovery repeat keys
-Bootmenu touch fixes to fix multiboot
[B][I]08-May-2012 - Epsylon3:[/I]
[/B]-HWUI on Froyo Kernel
-Render effects
-Androidian
[B][I]07-May-2012 - Epsylon3:[/I]
[/B]-return to normal gcc
-official themes support
-tether fix
-camcorder and barcode
[B][I]28-Apr-2012 - Epsylon3:[/I]
[/B]- waiting for feed
[B][I]16-Apr-2012 - Epsylon3:[/I]
[/B]- sorry but i've been out for a while...
[B][I]06-Apr-2012 - Epsylon3:[/I]
[/B]-Bootmenu 1.1.8
-prepare teamwin recovery 2.1support
[B][I]02-Apr-2012 - Epsylon3:[/I]
[/B]-CRT off
[B][I]29-Mar-2012 - Epsylon3:[/I]
[/B]-Android 4.0.4
[B][I]19-Mar-2012 - Epsylon3:[/I]
[/B]-Multitouch pressure,
-DSP manager,
-Trebuchet column count and wallpaper scrolling
[B][I]17-Mar-2012 - Epsylon3:[/I]
[/B]-Camera Video Recording fix,
-Root control setting,
-Profiles,
-Quiet hours
[B][I]08-Mar-2012 - Quarx:[/I]
[/B]-HW Acceleration (not full...yet)
[B][I]05-Mar-2012 - Quarx:[/I]
[/B]-Camcorder
-Fixed laggy videos
[B][I]05-Mar-2012:[/I]
[/B]-Camcorder
-Fixed laggy videos
[B][I]04-Mar-2012:[/I]
[/B]-fixed screen off animation
[B][I]03-Mar-2012:[/I]
[/B]-DroidWall Working
-Restart of fm radio fixed.
-Custom camera apps should work
[B][I]02-Mar-2012:[/I]
[/B](GodSlayer)
-Video recording
-Fixed Bayer camera jpeg encoder( Froyo )
-Removed 4VSEL(?)
-No Wallpaper Scrolling
[B][I]01-Mar-2012:[/I]
[/B](Arjoma)
-Camera Preview works... still require some tuning
-TODO: Fix Camera videos
[B][I]29-Feb-2012:[/I]
[/B]- Camera Preview
- Camera works also on Red lens
[B][I]26-Feb-2012:[/I]
[/B](ChirmiPlay)
- Hw acceleration (buggy)!!!
- Wallpaper scroll
- Chrome now -partially- works.
[B][I]24-Feb-2012:[/I]
[/B](thanks Shubhamqweasd)
- NEW CM9 boot animation (ONLY HALF).
- FM radio works (BUGGY ON RESTART) .
- CAMERA (TESTS)(STILL NO PREVIEW)
[B][I]20-Feb-2012:[/I]
[/B]-Tethering via Wifi and Bluetooth is supposed to work in the latest build.(Arjoma)
[B][I]18-Feb-2012:[/I]
[/B]-Microphone fix
-Some french translations
-Wifi teather basic.
-Refreshed boot menu.
-Fixed video playback
Note- to take a photo , change the resolution between 4MP and 5MP, with focus set to auto, flash LED can be buggy too.
[B][I]15-Feb-2012:[/I]
[/B]-Default camera kinda works (no preview) (press twice on shutter button, send the camera app to background <press home> return to camera and a picture is taken) (doesn't work every time)
-Mic still down
-1% battery (eppy's build didn't have it)
[B][I]10-Feb-2012:[/I]
[/B]-Faster camera than Epsylon3's build (still no preview, but you can take more photos fast. if you exit camera app and want to take pictures again you have to reboot)
-1% battery
[B][I]4-Feb-2012:[/I]
[/B]-Basic Camera support for green lens (we have no previews but if you click on shutter a picture is taken, you have to exit camera to take another picture)
[B][I]31-Jan-2012:[/I]
[/B] Feedback:--GodSlayer--:
Comes with Google Apps pre installed
Added Defy ROM Updater
Camera one step foward: There is shutter opening sound( or something of that sort ), Camera app doesn't just Force Close anymore. Still cannot connect to camera
UI is somewhat faster.
What is Defy ROM Updater?
A ROM Manager like app, it allows to
Check for updates
Perform all wipes( Davlik, app, data )
Backuping and Restoring the ROM
Entering Recovery Mode.
[B][I]29-Jan-2012:[/I]
[/B] Feedback:--GodSlayer--:
UI is much faster
3G Works rather well
Added Interface: Launcher, Interface:Themes, Launcher:System in settings
Added Personal:Profiles in Settings
Added System:Performance in Settings
Camera very very soon - when you usually open camera, there is that sound, in this build, it has that sound but camera app force closes.
Added Music app( CyanogenMod 7 )
Added Dev Tools - ( don't remember it in previous version, perhaps I am mistaken )
[B][I]12-Jan-2012:[/I]
[/B]-Fix wifi
-Dual Storage Notification
-APNs
[B][I]11-Jan-2012:[/I]
[/B]-Fix sensors
-mms.apk
-music.apk
-pin-code...etc
good job...maybe you can make the same for maniac cm7 builds...
On my defy...from ICS...yes!!! in your face Motorola!!!
Fix for mobile data (APN)
Just push the file in the link given below to /system/etc/ and go to Settings ==> Access Point Names ==> Press Menu button and clear defaults.
http://db.tt/SBlND1Fb
Sent from my MB525 using XDA App
the video is 8th december version?
jayeshrc said:
the video is 8th december version?
Click to expand...
Click to collapse
Yes, sim, oui, да, ja, हां, ya...
No the latest version, but 8th december.
Give proper Credits!...
Sent from my MB525 using xda premium
Thanks for the froyo kernel version, Quarx.
Defy with Soc cam has hope to get ICS now.
feh_pexto said:
Yes, sim, oui, да, ja, हां, ya...
No the latest version, but 8th december.
Click to expand...
Click to collapse
yes, video is from 8 dec version, it serves the purpose of a demo
nogoodusername said:
Give proper Credits!...
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
I will, sorry but i posted it at 4 am...i was sleepy
sorry...i don't know what happened but I doubleposted
Please mention maniac103 as author.
XianHuen said:
Please mention maniac103 as author.
Click to expand...
Click to collapse
i really wish he will join, but until now he didn't work on ICS
Great work! But the link for the user bug fix 2 does not work for me.
2.MMS.apk is missing + Calendar Sync issue (fix available here: http://forum.xda-developers.com/show...&postcount=551 )
Click to expand...
Click to collapse
maprix said:
Great work! But the link for the user bug fix 2 does not work for me.
Click to expand...
Click to collapse
fixed!
10 Char
adi4motion said:
i really wish he will join, but until now he didn't work on ICS
Click to expand...
Click to collapse
That's correct. I'll join forces as soon as I see a perspective for getting the camera to work. Unfortunately, that isn't the case at least at this moment.
maniac103 said:
That's correct. I'll join forces as soon as I see a perspective for getting the camera to work. Unfortunately, that isn't the case at least at this moment.
Click to expand...
Click to collapse
I know that camera is far away from being fixed, but you could help eliminating other bugs from system...we could have a very stable system and when someone have an idea about fixing camera, we fix that too
Hi,
Many things are okay but sadly I can't make a single call.
how do you do to activate or deactivate the pin code (the setup option doesn't work on my defy) ?
Tx
terrydaia said:
Hi,
Many things are okay but sadly I can't make a single call.
how do you do to activate or deactivate the pin code (the setup option doesn't work on my defy) ?
Tx
Click to expand...
Click to collapse
It's known bug, it doesn't work at all.
You ought to disable PIN check if you want use ICS on defy at the momet.
But you cannot disable it on ICS
slivabox said:
It's known bug, it doesn't work at all.
You ought to disable PIN check if you want use ICS on defy at the momet.
But you cannot disable it on ICS
Click to expand...
Click to collapse
I'll wait, it seems wiser.
Thank you very much anyway.
Works with multiboot?
edit:
Works ;D
Hello Guys, This is the port of JellyBean Pre-alpha from nexus-one by great Evervolv. This is not daily use ROM but slowly getting there.
Following features work.
BETA 4
Based on Latest Build Evervolv
Camera is fixed
More Stable.
More Faster
Added 2 method of A2SD (you can choose during installation).
Added option to disable EXT4 Journaling
Latest SecureCRT kernel
Bluetooth
Auto Button Backlight in low light area
BETA 3
Based on Latest Build Evervolv
Camera is fixed
More Stable.
Added 2 method of A2SD (you can choose during installation).
Youtube works do not update youtube at any cost
Latest SecureCRT kernel
Bluetooth
Launcher Rotation
Button Backlight
BETA 2
Based on Latest Build Evervolv
Camera is fixed
More Stable.
Added 2 method of A2SD (you can choose during installation).
Youtube works do not update youtube at any cost
Latest SecureCRT kernel
BETA 1
Based on Latest Build of Evervolv
Youtube fix credit to Xylo
Multi-touch fix Credit to Xylo
Updated to latest GAPPS
Working Camera
Alpha 6
Based on Latest Build of Evervolv
Youtube fix credit to Xylo
Multi-touch fix Credit to Xylo
Latest JB kernel by secureCRT
Latest GPU libs
Updated to latest GAPPS
Camera Does not work use other apps from market
Alpha 5 (Full Wipe Recommended)
Updated to Latest version of JB N1 rom
EVToolbox included, Remember some feature are not meant for HD2
Updated to latest JB kernel by secureCRT
Updated to latest Aderno Libs
I know Camera Crashes,so no point reporting about it. (any one who reports this will burn in hell for eons just kidding)
Added Google Now with Independent Locale from here Should allow you to use Google Now in your own language.
Alpha 4 Update 1 (This is not a complete ROM flash this over existing installation)
Modified ramdisk for better compatibility with A2SD scripts
Fixed Voice Recognition issue with A2SD installation
updater Will Wipe Dalvik Cache automatically.
Click to expand...
Click to collapse
Alpha 4 (Make sure to read Installation Instruction on post 2)
Latest Build of JB by Evervolv
Added Amurllaz A2SD script modified for JB. originally modified by lennox for MIUIv4 desire. Credit : Lennox (miuiau) if you use this script in your rom make sure to give credit to him.
Moved heavy files from internal memory to SD-CARD
Changed Superuser binary to 3.2 RC should fix remembering of permissions
Click to expand...
Click to collapse
Alpha 3
USB Mass storage Mode
Browser
Installing Apps on SD card
Superuser (included app and binary already in the rom)
Camera
Click to expand...
Click to collapse
Alpha 2
Sound
Google Now (without maps you may get FC when accessing maps related features)
USB Mass Storage
Gmail App is not included please download from market
Click to expand...
Click to collapse
Alpha 1
Working
Mobile Data 3G/2G
Calls
WiFi
Bluetooth
SMS
Sound check download page for fix -------------------------- Credit Bexton
Video Playback
USB Mass Storage ----------- Credit Bexton
Click to expand...
Click to collapse
Not Working
Wifi Teathering
Click to expand...
Click to collapse
Download
InstallationPartition Requirement :
Internal Only
System : 270MB (Min)A2SD Enabled
System : 210MB (Min)
SD-EXT : 1GB ext3/ext4Steps:
Format sd-ext, Data, System, Cache, Boot
Install Rom
If you have T-Mobile HD2 ie with 1GB Internal Memory you can choose either option but if you have International HD2 ie with 512MB Internal Memory then you should only choose Install with A2SD.
When Installation is complete Reboot the phone.
Setup your google account come to Home Screen wait for 4-5 mins then reboot the phone.do not use or try to install or do anything else on first boot.
After 2nd reboot use your phone normally.
Enable Force GPU re-endering from Settings->Developer Options->Force GPU rendering should make ROM bit smother/faster
if for any reason phone bootloops reboot go to recovery wipe dalvik cache and reboot again.
Important Note: When using Rom with A2SD normal wipe dalvik - cache will not wipe dalvik-cache properly.
ModsSecurecrt Kernelfor Alpha 1 only
http://forum.xda-developers.com/showpost.php?p=28865562&postcount=79
for Alpha 2 and above see ROM download page.Superuser Apphttp://forum.xda-developers.com/show...2&highlight=su
reserved 2
jamal2367 said:
Yes HWA Kernel from Tytung
But we still do not know if it works
Click to expand...
Click to collapse
HWA works but not as smooth as ICS. even then overall system is fast
250 MB for Portition is very much ?!
Click to expand...
Click to collapse
space required on system partition by JB is more.
google now doesn't work due to kernel issues(like in any rom except galaxy nexus and nexus 7)
hwa doesn't work correctly on n1 too
not su support
nameless517 said:
google now doesn't work due to kernel issues(like in any rom except galaxy nexus and nexus 7)
hwa doesn't work correctly on n1 too
Click to expand...
Click to collapse
Google Now appears to be working fine on my device.
System sounds, ringtones and message tones do not appear to be working.
B Dizzle said:
Google Now appears to be working fine on my device.
System sounds, ringtones and message tones do not appear to be working.
Click to expand...
Click to collapse
havent tried gnow but can confirm no sounds work at all
and i got SU from here http://forum.xda-developers.com/showthread.php?t=1742522&highlight=su
and flashed it and it seems to work
also installed apex launcher and it works so far
care to post some pics or video
+1 on sounds firefox is working
here are some screens
Good job on getting this working
Its not too bad, its a lot like when we first got ICS. It appears as so HWA isnt there, all the animations and screen movements lag a few miliseconds (but you can see it). Typing it does this too.
But, everything works otherwise besides sound (in working list) and browser (in not working list) for me. A great proof of concept, good work!
Very cool proof of concept! Booted up fine and all. Is anyone not getting responses from Google voice/search? It transcribes it fine, but the icon keeps spinning and no results come back for anything. Or is that filed under the 'google now crashing' report?
timekeeper said:
Very cool proof of concept! Booted up fine and all. Is anyone not getting responses from Google voice/search? It transcribes it fine, but the icon keeps spinning and no results come back for anything. Or is that filed under the 'google now crashing' report?
Click to expand...
Click to collapse
Voice search isn't working on any roms atm only on GNexus and Nexus 7. @OP can you please provide a different site other than filefactory? The download speed is horrible thank you :good:
Origin8 said:
Voice search isn't working on any roms atm only on GNexus and Nexus 7. @OP can you please provide a different site other than filefactory? The download speed is horrible thank you :good:
Click to expand...
Click to collapse
Funny it is for me but firefox is set default. stock browser and chrome fc.
Is there a line i can add in build.prop to enable softbuttons?
Once sounds ie ringtones, alarm, and message work This could be daily
Origin8 said:
Voice search isn't working on any roms atm only on GNexus and Nexus 7. @OP can you please provide a different site other than filefactory? The download speed is horrible thank you :good:
Click to expand...
Click to collapse
Again voice search is working through gnow. I agree the download speed was rough.
Sent from my HTC HD2 using xda premium
B Dizzle said:
Again voice search is working through gnow. I agree the download speed was rough.
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
My correction, Google voice queries work fine if you launch it from the G icon in the app launcher. Cool! not sure how to enable Google Now cards and stuff though.
Will delete if OP requests.
Mirror:
http://www.filefactory.com/file/63m81m4rbc6j/n/JellyBean_zip
B Dizzle said:
Will delete if OP requests.
Mirror:
http://www.filefactory.com/file/63m81m4rbc6j/n/JellyBean_zip
Click to expand...
Click to collapse
Code:
All the earning from Adfly is Donated in Charity please consider using ad-supported link and do not create mirror for downloads
The second Adfly link is mediafire and gives good speeds.
parker09 said:
Code:
All the earning from Adfly is Donated in Charity please consider using ad-supported link and do not create mirror for downloads
The second Adfly link is mediafire and gives good speeds.
Click to expand...
Click to collapse
When I try the ad-fly link it get's stuck on "please wait". I had no idea it was mediafire because it never went anywhere. Anyway to fix this? Thanks
I might have a fix for mass storage. Will report back in a bit.
EDIT: Instead of manually trying to fix mass storage, I'm going to port the Nexus S version as it has almost everything working.
Frequently Asked Questions
CyanogenMod 10
Android 4.1.2 Jelly Bean for Motorola Defy and Defy+
The FAQ has been updated with some information about the 2nd Boot builds with custom kernel thanks to the collaboration of the user sa3e1 who rewrte some parts of the FAQ. If you have any suggestions, corrections or some information to add, please send me an MP. For more information about JB please visit the Motorola Defy Wiki With JB Status
Click to expand...
Click to collapse
Before doing anything:
►Always start the procedures with 80% - full charge battery (if your battery die during the process, you can still go Mcgyver)
►Make a backup of your apk's (using Titanium Backup for example) and a nandroid backup from recovery.
►If you have any problem, don't blame CyanogenMod Team, Quarx, Epsylon3, the FAQ or whatever. This ROM works (except the known bugs), if it's not working for you, it's mostly because you used wrong versions or are doing something wrong.
► INDEX
- Where can I download all that I need?
- NEW What builds are "2ndBoot"?
- NEW Is this ROM for Defy or Defy+?
- NEW I don't have CM10 and I want to install it, how can I do that?
- NEW I already have CM10 and I want to upgrade to a newer nightly, how can I do that?
- NEW Is this ROM stable and ready for daily use?
- NEW What's the difference between Quarx and Epsylon3 versions?
- Can I flash an Epsylon3's build over a Quarx's one without wiping data?
- What is HWA? Is this a good thing?
- So, CM10 have HWA? How can I enable it?
- I'm on CM10 and a lot of apps give me FC and don't work properly
- Why Google Now doesn't work for me? Why I just get regular google search?
- Why are some apps duplicated?
- Why can I use Defy+ (MB526) builds on Defy (MB525) with red lense and what are the advantages?
- I lose my data connection every time, is this error related to this rom?
- I've just installed a new rom, and my battery indicator suddenly drops, is this a bug? Do I have to re calibrate it?
- How can I overclock and undervolt my Defy? And what are the advantages?
- I have problems with WiFi connections, my network get disconnected.
- NEW How can I change the DPI and keep play store compatibility?
► Where can I download all that I need?
Download Link (Quarx's builds) | Mirror | Official Thread
Download Link (Epsylon3's builds) | Mirror
Kernels | Battery Fix for red lens | New Battery Fix | Gapps (Use the last gapps-jb-2012XXXX-signed.zip)
► What builds are "2ndBoot"?
24.09 builds and before ► Normal Builds
10.10 builds and after ► 2ndBoot Builds
► Is this ROM for Defy (MB525) or Defy+ (MB526)?
For 2ndBoot Builds:
Both, since Quarx’s "2nd boot” builds we have a universal build with custom kernel supporting all Defy variants (Defy Green Lens, Defy Red Lens and Defy+). This means that the same .zip file works on the Defy green lens, Defy red lens and Defy+.
For PRE 2ndBoot Builds:
Defy Green Lens ► Froyo Kernel ► CM10-2012XXXX-NIGHTLY-mb525.zip
Defy Red Lens ► Gingerbread Kernel ► CM10-2012XXXX-NIGHTLY-mb526.zip
Defy+ ► No Kernel Needed ► CM10-2012XXXX-NIGHTLY-mb526.zip
Don't know if you got green or red lens? Click here.
► I don't have CM10 and I want to install it, how can I do that?
Pre-steps:
► Your phone has to be roooted.
► If this is the first time you install a custom rom (if you have stock froyo) you'll have to root your phone, install 2nd init (custom recovery), and some other things.
If you aren't familiar with this concepts, these posts will be useful for you:
All-in-One Defy Beginner's guide
FAQ | Guides |Tutorials for Defy
[FAQ] Cyanogenmod 7 by Quarx
► Download all the files that you need and put them on the sdcard.
► Charge your phone until you have 80-100% battery.
► Make a backup of your apps and a nandroid backup of your rom (everything you have on your phone will be deleted).
For 2nd Boot Builds
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash CM10-********-NIGHTLY-mb526.zip
4b) Install kernel update if available (for instance the update_for_11.10_v2.zip for 11.10 nightly)
5) Flash Gapps.
6) Wipe Cache and Dalvik again (recommended).
7) Restart.
Note: Sometimes you'll have to remove the battery and restart the phone.
For MB526 and PRE 2ndBoot Builds
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-2012xxxx-NIGHTLY-mb526.zip.
6) Flash Gapps.
7) Flash Battery fix (only for red lens)
8) Wipe Cache and Dalvik again (recommended).
9) Restart.
For MB525 and PRE 2ndBoot Builds
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe Cache and go to Advanced ► Wipe dalvik.
3) Go to install zip from sdcard ► Choose zip from sd card.
4) Flash froyo kernel
5) Flash CM10-2012xxxx-NIGHTLY-mb525.zip.
6) Flash Gapps.
7) Wipe Cache and Dalvik again (recommended).
8) Restart.
A little FAQ extracted from the Wiki for some 2nd Boot Builds doubts:
Where is the Package for Defy (MB525) ?
From 2ndBoot Release there is only 1 package for both Defy & Defy+.
Do I have to install the Custom Kernel separately ?
No, the Nightly Zip already includes the Custom Kernel, but there might be a newer kernel released without nightly. i.e. there is a never kernel (update_for_11.10_v2.zip for 11.10 build)
Must we change the Boot sequence to 2ndBoot in 2ndInit ?
No, the Upgrade does this for you.
Is a Data Wipe required ?
Only if you are coming from builds other than CM10 (Quarx's). There is no harm in doing a Data Wipe otherwise also.
My phone lags after Boot up.
Its a bug in the Custom Kernel. To solve just turn off Wifi/Internet, Screen Lock & keep idle for a couple of mins.
► I already have CM10 and I want to upgrade to a newer nightly, how can I do that?
Automatic update: (Using Defy ROM Updater)
1) Go to Settings ► About phone ► Additional system updates OR open Defy ROM Updater directly from the app drawer.
2) Tap Check for updates.
3) Select the newer version.
4) Select Start Download.
5) When the download finishes, install it.
Manual update:
1) Go to Recovery
2) Wipe Cache and Dalvik
3) Flash the last .zip file.
4) Flash gapps (just if you have a newer version of gapps, otherwise, this step is optional)
4.1) (ONLY DEFY RED LENS WITH PRE 2ND BOOT BUILDS) Flash battery fix (if you don't, the battery meter will display 1%)
5) Wipe Cache and Dalvik (this is also optional)
6) Restart.
► Is this ROM stable and ready for daily use?
Yes. In fact it's stable as CM7. Make a backup and try it by yourself.
► What's the difference between Quarx and Epsylon3 versions?
The new "2ndBoot” builds with custom kernel are avaible only from Quarx.
There weren’t recent updates from Epsylon lately, so if you want recent updates, and custom kernel improvements use Quarx’s builds.
NOTE: Always use the last version!
► Can I flash an Epsylon3's build over a Quarx's one without wiping data?
Yes, you can. Just follow the steps as if you were upgrading from a previous nightly. I didn't test coming from Eppy's to Quarx. EDIT: You can also flash Quarx builds over an Epsylon one without wiping data.
► What is full HWA? Is this a good thing?
This article explains everything:
"...Contrary to what we’ve always heard, Android has had some hardware acceleration for drawing 2D UI elements since before 1.0. Many of the animations we see every day on Android have been hardware accelerated the whole time. All “window compositing” is done using GPU-based hardware rendering.
Since Android 4.0 we have “full” hardware acceleration. All UI elements in windows, and third-party apps will have access to the GPU for rendering. Android 3.0 had the same system, but now developers will be able to specifically target Android 4.0 with hardware acceleration. Google is encouraging developers to update apps to be fully-compatible with this system by adding the hardware acceleration tag in an app’s manifest.
But hardware accelerated drawing is not all full of win. For example on the PVR drivers of devices like the Nexus S and Galaxy Nexus, simply starting to use OpenGL in a process eats about 8MB of RAM. Given that our process overhead is about 2MB, this is pretty huge. That RAM takes away from other things, such as the number of background processes that can be kept running, potentially slowing down things like app switching..."
► So, CM10 has full HWA? How can I enable it?
Thanks to the work of our developers on CM9, we have full HWA since the first alpha of CM10. HWA is enabled by default on CM10, so you don't have to do anything. However, you can select in which apps you want to enable it, with the HWA Selector, this app is preinstaled in all nightlys and it's easy to use.
► I'm on CM10 and a lot of apps give me FC and don't work properly
Make sure you have done a correct and clean instalation. Try wiping cache and dalvik.
► Why Google Now doesn't work for me? Why I just get regular google search?
That's related to the country you come from
USA ► pictures, knowledge graph, etc.
All the rest ► only normal google answers you also got from the website.
One solution is: In the search app, press Menu ► Go to Settings ► Privacy and accounts ► Search on google.com (activate this) and Location & Google search (deactivate this).
If this doesn't work, set your phone language to English.
► Why are some apps duplicated?
Make sure you flash the lastest Gapps or use a file explorer for root (as Root Explorer), go to system/app and delete duplicated apps (gallery and camera are more common)
► Why can I use Defy+ (MB526) builds on Defy (MB525) with red lense and what are the advantages? thanks to G00fY2
Because Defy+ has same camera as normal Defy with red lense, you can use its Gingerbread kernel and the MB526 builds. With green lense Defy you have to use Froyo kernel and MB525 builds to have working camera. But beside the use of 4 instead of 3 Vsel CPU steps there are no real advantages in using GB kernel. Both are based an 2.6.32.9 Linux kernel. Also you have to install a seperate battery fix, when using Defy+ build with normal Defy, because it has different battery size.
► I lose my data connection every time, is this error related to this rom?
No, it's a common bug related to others roms too. Check this post.
► I've just installed a new rom, and my battery indicator suddenly drops, is this a bug? Do I have to re calibrate it?
That's not a bug. Battery always show wrong percentajes when you flash a new rom. Wiping battery stats will not make any difference.
The solution is simple: You don't have to do anything. Charge your phone to 100% and wait one cicle of charge. Your battery stats will correct automatically. Your system always automatically "wipe" the stats when you charge your phone.
► How can I overclock and undervolt my Defy? And what are the advantages?
You can make your phone faster and your battery last longer. Check this article.
► I have problems with WiFi connections, my network get disconnected.
Make sure you don't have the "Avoid poor connections" option enabled. Go to Settings ►WiFi, press the menu button ►Advanced and uncheck Avoid poor connections.
► How can I change the DPI and keep play store compatibility? NEW
You'll need an file explorer. I recommend Root Explorer
1) Open Root Explorer
2) Go to /system and make sure that in the top says "Mount R/O". That means that the /system is mounted as R/W.
3) Long press on build.prop
4) Open with ► Text Editor
5) Scroll down until you see this line
Code:
ro.sf.lcd_density=240
and change that number for anyone that you want. You can try different numbers, I recommend 220, or 200.
This is how the line should be:
Code:
ro.sf.lcd_density=200
6) Menu ► Save changes.
7) That's it, when you reboot the resolution will be changed.
IMPORTANT: In order to fix the market compatibility, go to stable recovery and flash the right patch. DOWNLOAD
I'll keep updating this thread with your contributions, please feel free to correct me or suggest new questions.
I appreciate your work, but there is a similar thread, started a while ago.
vap_66 said:
I appreciate your work, but there is a similar thread, started a while ago.
Click to expand...
Click to collapse
yes, but the op of that thread just have the instalation instructions. The idea is post here the same questions that are asked over and over in the development thread.
I did this for helping some users, and i'm sure some of them will find this useful.
cdlq456 said:
yes, but the op of that post just have the instalation instructions. The idea is post here the same questions that are asked over and over in the development thread
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Very nice!
Just some corrections:
5) Flash CM9 Kernel (JUST FOR DEFY RED LENS USERS)
5) Flash CM7 Kernel
Click to expand...
Click to collapse
Never flash a kernel after the ROM, Epsylon said this long time ago, because you can revert some changes made in the ROM. You just have to flash the kernel BEFORE the ROM.
- Why are some apps duplicated?
Click to expand...
Click to collapse
This happens when you flash and old version of Gapps, if you flash latest versions this bug is not present.
And something i want to add to the OP:
If you flash this ROM on Multiboot (on your SD card) you WILL experience lag, flash it as main system before come here to complain about that.
Thank you for your work!
mato_d007 said:
Very nice!
Just some corrections:
Never flash a kernel after the ROM, Epsylon said this long time ago, because you can revert some changes made in the ROM. You just have to flash the kernel BEFORE the ROM.
This happens when you flash and old version of Gapps, if you flash latest versions this bug is not present.
And something i want to add to the OP:
If you flash this ROM on Multiboot (on your SD card) you WILL experience lag, flash it as main system before come here to complain about that.
Thank you for your work!
Click to expand...
Click to collapse
Thanks for your help! I'll edit the op in a while
2) Wipe data/factory reset
Click to expand...
Click to collapse
Arrrrrgh do I really have to?
In no case I want to lose my messages. Is there any other working possibility?
Or does that mean no JB for me? :/
Heidegeist said:
Arrrrrgh do I really have to?
In no case I want to lose my messages. Is there any other working possibility?
Or does that mean no JB for me? :/
Click to expand...
Click to collapse
When you want to flash from CM9 you can try without data wipe . It wordek for my very well Just wipe Cache and Dalvik Cache.
Heidegeist said:
Arrrrrgh do I really have to?
In no case I want to lose my messages. Is there any other working possibility?
Or does that mean no JB for me? :/
Click to expand...
Click to collapse
you can make a backup of your messages with sms backup and restore
xolo7 said:
When you want to flash from CM9 you can try without data wipe . It wordek for my very well Just wipe Cache and Dalvik Cache.
Click to expand...
Click to collapse
On the other hand, when I tried to do it without the data wipe, the OS was very slow and applications stopped responding often. After wiping it completely, it's fast and snappy. So YMMV a lot, and I recommend using SMS Backup and Restore[ and doing the factory reset.
cdlq456 said:
F.A.Q. for CM10 Jelly Bean on Motorola Defy and Defy+
- How to update from previous nightly's?
1) Go to recovery
2) wipe cache and dalvik
3) flash the last .zip file
4) flash gapps
5) wipe cache and dalvik
6) restart
Make sure you flash the lastest gapps or use a file explorer for root (as Root Explorer), go to system/app and delete duplicated apps (gallery and camera are more common)
Click to expand...
Click to collapse
no need to flash gapps every time update the nightly
or put a (....) and write "only you have an update for it"
a noob will flash a gapps every time update the nightly
ps. to many wipe cahe and dalvik
one on the begining is enough
Anyone knows why my wi-fi does not work properly?
I just do everything that the first post says but but I only managed to connect once. It took about 30 minutes to connect and disconnect after 20 minutes.
Maybe got somethin' with WPA2.
vaserbanix said:
no need to flash gapps every time update the nightly
or put a (....) and write "only you have an update for it"
a noob will flash a gapps every time update the nightly
ps. to many wipe cahe and dalvik
one on the begining is enough
Click to expand...
Click to collapse
i will clarify that, but that's the process that i've followed since my first cm7 builds (wipe before restarting) and NEVER have any problem with fc or bootloops or anything like that.
Another thread for this? I'm confused now, where are the BUG REPORTS supposed to be reported? under this thread? under the [support] thread?
leandeganis said:
Another thread for this? I'm confused now, where are the BUG REPORTS supposed to be reported? under this thread? under the [support] thread?
Click to expand...
Click to collapse
this is just a faq, if you have a question that's not answered here, post it.
vaserbanix is right, no gapps needed. Never hearded about this when just updating to new build, cause the will stored in \data not system.
Also you should add links Epsylons download link and links to kernels, battery fix and so on. Maybe the best way, is to just link to [Support] - [JB] CM10 Android 4.1.1 for the Defy(+) for questions about installation.
Maybe an other good point for FAQs:
Why can I use Defy+ (MB526) builds on Defy (MB525) red lense and what are the advantages?
Because Defy+ has same camera as normal Defy with red lense, you can use its Gingerbread kernel and the MB526 builds. With green lense Defy you have to use Froyo kernel and MB525 builds to have working camera. But beside the use of 4 instead of 3 Vsel CPU steps, and possibility for 720p recording there are no real advantages in using GB kernel. Both are based an 2.6.32.9 Linux kernel. Also you have to install a seperate battery fix, when using Defy+ build with normal Defy, because it has different battery size.
G00fY2 said:
vaserbanix is right, no gapps needed. Never hearded about this when just updating to new build, cause the will stored in \data not system.
Also you should add links Epsylons download link and links to kernels, battery fix and so on. Maybe the best way, is to just link to [Support] - [JB] CM10 Android 4.1.1 for the Defy(+) for questions about installation.
Maybe an other good point for FAQs:
Why can I use Defy+ (MB526) builds on Defy (MB525) red lense and whats the advantage?
Because Defy+ has same camera as normal Defy with red lense, you can use the same Gingerbread kernel and the same builds. With green lense Defy you have to use Froyo kernel to have working camera. But beside the use of 4 instead of 3 Vsel CPU steps, there are no real advantages in using GB kernel.
Click to expand...
Click to collapse
thanks. i'll add it to the OP
Thanks, but I habe edited my post and improved my answer. So please use this for first post.
G00fY2 said:
Why can I use Defy+ (MB526) builds on Defy (MB525) red lense and whats the advantage?
Because Defy+ has same camera as normal Defy with red lense, you can use the same Gingerbread kernel and the same builds. With green lense Defy you have to use Froyo kernel to have working camera. But beside 4 instead of 3 clock-steps, there are no real advantages in using GB kernel.
Click to expand...
Click to collapse
porhaps is only my opinion but the GB2.3.6 kernel is most stable on overcklok than froyo kernel
froyo kernel was made for Defy red/ green and cloked to 800mhz and it run to1000mhz
up on that value it give more restarts then GB2.3.6 wich i took it to 1.3ghz without problem
maybe is wrong my opinion but i test its with many rom's
G00fY2 said:
Thanks, but I habe edited my post and improved my answer. So please use this for first post.
Click to expand...
Click to collapse
done!
This is the discussion and bug report thread about arco68's [ROM][KK][4.4.2][KOT49H] CyanogenMod 11.0 (20140101-UNOFFICIAL)
Downloads and Changelogs:
2014-03-11: CM-11.0 20140311-UNOFFICIAL [DOWNLOAD]
MD5SUM: 4fe488467dfbf33a95e8363bb758871b
Updated Adreno blobs
Synced with CM
Kernel 3.4.82
2014-01-22: CM-11.0 20140122-UNOFFICIAL [DOWNLOAD]
MD5SUM: 65a6dcf31f0cd8917f0447b7bdb761e8
Disabled Low Power Audio (LPA)
New workaround for text glitch (using classic webview)
Fix zoom in camera preview (credits Dorregaray)
2014-01-17: CM-11.0 20140117-UNOFFICIAL [DOWNLOAD]
MD5SUM: 546d101784cbd493607558273459ac6b
Enabled Low Power Audio (LPA)
Fixed VOIP audio
Fixed Netflix playback
USB OTG and zRAM fixes (credits Christopher83)
Kernel 3.4.77
2014-01-10: CM-11.0 20140109-UNOFFICIAL [DOWNLOAD]
MD5SUM: 5688ddd7efccbfdf3d485804543fe8b3
Enable TARGET_USE_QCOM_BIONIC_OPTIMIZATION
Possible workaround for the graphic glitch
Updated media profiles
Increased minimum CPU frequency to 368 MHz
Lowered zRAM size to half of what it was
Kernel 3.4.76
2014-01-06: CM-11.0 20140106-UNOFFICIAL [DOWNLOAD]
MD5SUM: 588e8977250194cb3bd8bedfc6e29c8c
Fixed storage swapping
2014-01-05: CM-11.0 20140105-UNOFFICIAL [DOWNLOAD]
MD5SUM: c577b62973aac5099bdea60b20e3073d
Fixed bluetooth tethering
Implemented storage switching
Increased zRAM allocation and changed setup according to KK specs (old method is removed from CM11)
2014-01-01: CM-11.0 20140101-UNOFFICIAL [DOWNLOAD]
MD5SUM: 57e225a2955e15236c37abb00072ee9d
Switched back to updated camera app (fixed issue with preview)
Allocated more memory for PMEM (should fix issues like switching to video mode in camera app after taking pictures)
2013-12-31: CM-11.0 20131231-UNOFFICIAL [DOWNLOAD]
MD5SUM: 26910b9933dce0ff01137f278c6b49d7
Fixed activity indicators for mobile data
Fixed preview in camera after taking a picture
Enabled ZRAM by default
2013-12-28: CM-11.0 20131228-UNOFFICIAL [DOWNLOAD]
MD5SUM: 9f2c2aae9fa3143c69537e7f67b51ac1
Initial release
GAPPS:
gapps version 20131208 (Not ART compatible)
MD5SUM: a387243442413f0a9153ab1bad149199
Please verify the md5sum to be sure you got the right one.
Note: CM for Galaxy W is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Installation Steps:
Use CWM6.
Warning: Only use this recovery to flash CM-11.0. Otherwise, you risk bricking your phone, or you might experience boot and stability issues!
Wipe data and cache.
Flash update*.zip.
Flash gapps*.zip. You must flash gapps after every upgrade to CM11.0 since /system is formatted, wiping your previous add-ons.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
Warning: Do not restore backup data of system apps!
Bugs:
CM-11.0 20140311
-Movie Studio is unstable and can crash or freeze phone
CM-11.0 20140122
-Movie Studio is unstable and can crash or freeze phone
CM-11.0 20140117
-Movie Studio is unstable and can crash or freeze phone
CM-11.0 20140109
-Movie Studio is unstable and can crash or freeze phone
-Storage swapping is not yet implemented in CM11.
CM-11.0 20140106
-Movie Studio is unstable and can crash or freeze phone
-Storage swapping is not yet implemented in CM11.
CM-11.0 20140105
-Movie Studio is unstable and can crash or freeze phone
-Storage swapping is not yet implemented in CM11.
CM-11.0 20140101
-Movie Studio is unstable and can crash or freeze phone
-Storage swapping is not yet implemented in CM11.
Q&A:
-Q:How to enable transparent status bar?
A:Edit build.prop line
Code:
ro.config.low_ram=true
Change "true" to "false"
-Q:How to enable USB Mass Storage?
A:Edit build.prop line
Code:
Persist.sys.usb.config=mtp
Change 'mtp' to 'mass_storage'
How to post a bug:
Please copy the following code in your post and fill in the information:
Version: (For example 20131231)
Bug title: Write the title
Probability of occurrence: Write here "LOW/MEDIUM/HIGH" (depending on how often the bug occurs)
Description: Write how the bug appears and how you solve the bug
Log: Add a logcat if you can
Screenshoot: Make a screenshot
ATTENTION! Posts about bugs caused by custom Kernels or MODs will be ignored! Post them in the specific Kernel / MOD Thread but not here.
thanks for making this discussion thread man
okay let me start my first post here. i guess the feature we're missing atm is sdcard swap.
theoretically this should be done on ramdisk because we can't find vold.fstab anymore. i haven't got time to test this but i think swapping through ramdisk modification should be working
reference here
Can I use the recovery 6.0.44 version ?
The link you provided is not available.
freinet
freinet said:
Can I use the recovery 6.0.44 version ?
The link you provided is not available.
freinet
Click to expand...
Click to collapse
the googledrive link is working
Hhmmmhh, it gives me this : cm_ancora-ota-build1.zip
This is not the recovery I think
freinet
weihan1102 said:
the googledrive link is working
Click to expand...
Click to collapse
when I download recovery from google drive the extension file is .bin? why not .img? so how to flash it?
freinet said:
Hhmmmhh, it gives me this : cm_ancora-ota-build1.zip
This is not the recovery I think
freinet
Click to expand...
Click to collapse
sorry , it is my mistake...i put the right link now.
Racun said:
when I download recovery from google drive the extension file is .bin? why not .img? so how to flash it?
Click to expand...
Click to collapse
it should be .img
weihan1102 said:
it should be .img
Click to expand...
Click to collapse
yes I think is corrupt file because I have bad connection.
after I download again from google drive file extension is .img
Thanks and see u soon I will flash this rom and report again if I found bugs.
Img file is new for me, how to flash?
Til now I have only flashed with recovery and sometimes with odin?
What recovery version is this?
Thanks for help.
freinet
freinet said:
Img file is new for me, how to flash?
Til now I have only flashed with recovery and sometimes with odin?
What recovery version is this?
Thanks for help.
freinet
Click to expand...
Click to collapse
put the recovery file in sdcard then type this in terminal emulator
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
freinet said:
Img file is new for me, how to flash?
Til now I have only flashed with recovery and sometimes with odin?
What recovery version is this?
Thanks for help.
freinet
Click to expand...
Click to collapse
You can use adb shell like above.
Or the easiest way is using http://forum.xda-developers.com/showthread.php?t=2401988 by hornet and educk
There is "Flash RECOVERY" function on "Tools" tab.
hadidjapri said:
thanks for making this discussion thread man
okay let me start my first post here. i guess the feature we're missing atm is sdcard swap.
theoretically this should be done on ramdisk because we can't find vold.fstab anymore. i haven't got time to test this but i think swapping through ramdisk modification should be working
reference here
Click to expand...
Click to collapse
So it depends on kernel?!!
I think when cm finished and released first nightly, there will be more features and SD swap with!
Sent from my GT-I8150 using XDA Premium 4 mobile app
weihan1102 said:
it should be .img
Click to expand...
Click to collapse
Im trying download the recovery from drive, bit only have bin files...
Sent from my GT-I8150 using xda app-developers app
Recovery
I flash this very nice rom with Cmw 6.0.4.4 and not seen any problem...
What should happen?
hadidjapri said:
thanks for making this discussion thread man
okay let me start my first post here. i guess the feature we're missing atm is sdcard swap.
theoretically this should be done on ramdisk because we can't find vold.fstab anymore. i haven't got time to test this but i think swapping through ramdisk modification should be working
reference here
Click to expand...
Click to collapse
yes I confirm your theory in a 4.4 galasxy s rom i read this:
Kernel for switching internal & external SD
Because vold.fstab is no longer used and has been integrated in fstab.aries (which can only be changed before compiling the kernel, as it ends up in the ramdisk), I made a special kernel version with switched SD cards:
he make two kernel, one normal and one with swap SD
skylender96 said:
I flash this very nice rom with Cmw 6.0.4.4 and not seen any problem...
What should happen?
Click to expand...
Click to collapse
it will no any problem i think.
Spirit FM is tested and working fine
it is a good news for people who needs FM radio
PS: you need to set Method qdsp5v2 Altern to get the sound (if your phone freeze after change the Method,just long press power button , after restart Spirit FM will works fine)
i know is a stupid question, u can make the status bar trasparent on the lockscreen like cm11 by penguin
Finitore said:
i know is a stupid question, u can make the status bar trasparent on the lockscreen like cm11 by penguin
Click to expand...
Click to collapse
actually statue bar doesn't transparent is because low_ram is enabled
you can simply turn off it by change the
ro.config.low_ram=true
Click to expand...
Click to collapse
to
ro.config.low_ram=false
Click to expand...
Click to collapse
in build.prop to get the transparent status bar
Download:
http://dl.omnirom.org/find7
Kernel source:
https://github.com/omnirom/android_kernel_oppo_msm8974
Google space:
https://goo.gl/spaces/TdBgFFTWcbqDHNRYA
XDA:DevDB Information
Omni nightlies for Find 7a/7s, ROM for the Oppo Find 7
Contributors
maxwen
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Current Stable Version: 6.0
Created 2015-10-30
Last Updated 2016-02-04
Oppo Firmware package 2.1.5
You must run firmware 2.1.5 BEFORE flashing this ROM
If you come from ColorOS 2.1.5 you dont need to to anything else
flash this in recovery
https://drive.google.com/file/d/0B4vRAhHheUkxeUZuSFR3WGVxOE0/view?usp=sharing
md5sum f60e482f29cd238d9e2a5b5bcf682139
3rd party camera apps
For better camera experience using oppo camera apk is possible e. g.
http://www.xda-developers.com/coloros-camera-on-opo-great-port-great-option/
http://forum.xda-developers.com/oneplus-one/themes-apps/port-coloros-camera-cm11s-t3030369
BUT using a non standard camera app is not supported in any way so if you have issues you are on your own.
Known issues
-NFC beam not working
FAQ
How to get root?
Install SuperSU >=2.68 from recovery http://forum.xda-developers.com/apps/supersu
I cant access my internal storage after converting to LVM?
Run the following command in a terminal (you need to install SuperSU before)
Code:
su
restorecon -RF /data/media/0
Is LVM supported?
Yes - actually at the moment only LVM is tested
Non-LVM setup might work but is untested from me
How to setup LVM?
Here is one tutorial http://forum.xda-developers.com/showpost.php?p=64266122&postcount=2035
Backup link for setuplvm https://drive.google.com/file/d/0B4vRAhHheUkxLTZRMlhaRXdKS0U/view?usp=sharing
Can I upgrade from 5 to 6 by dirty flashing?
No - 6 must be flashed clean with proper gapps
I have problems with xposed,viper4android - can you help?
GTFO
Why is encrypt phone is not working?
Most prolly reason is that the /data partiton is missing the needed footer to store encryption keys
If that is the case you can run a resize partiton in TWRP
Use Wipe -> Advanced Wipe -> check Data -> press "Repair or Change ..." -> press Resize
This will resize the partition and free that little space
This is in general save and can be done without loosing data
BUT just to be sure make a backup of ALL in /data - including /sdcard
Does this ROM support Android Pay
Nope
Does this ROM support f2fs
Nope - If for whatever reason you have f2fs partitions you must convert them to ext4 BEFORE flashing
How to encrypt the device
Best do after factory reset before flashing ANYTHING - especially before xposed and SuperSU
gapps:
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
Wow!!! Exciting!!!!!
I can't wait!
wow i will waiting you
..
You're on fire.
Gapps downloaded, now waiting for the best part
In case you guys didn't notice @maxwen already uploaded a test build on 2nd post. Downloading now.
Minor bug. Distance between battery and network indicator.
Edit: new bug encounter. When switching from front camera to back it FC.
Thanks Maxwen, this is impressively stable for an early test! A lot of force closes start when adding GAPPS, but some of these can be mitigated by granting all permissions to them in Settings > Apps.
Pojiku said:
Thanks Maxwen, this is impressively stable for an early test! A lot of force closes start when adding GAPPS, but some of these can be mitigated by granting all permissions to them in Settings > Apps.
Click to expand...
Click to collapse
I didnt face any fc for any gapps. Do you use gapps provided in 2nd post?
Right now im exploring it and notice battery optimization is not there yet? Whenever i enable it for all apps it will revert back.
Oh ****... until this afternoon I can't install it
javier.pc said:
Oh ****... until this afternoon I can't install it
Click to expand...
Click to collapse
Why? For flashaholic this is something new and fun.
why am i getting different colors?
Bookmarking this
Is it LVM compatible ?
StormTrooper89 said:
Edit: new bug encounter. When switching from front camera to back it FC.
Click to expand...
Click to collapse
known: it also FCs sometimes when you exit camera
benoita74 said:
Bookmarking this
Is it LVM compatible ?
Click to expand...
Click to collapse
ONLY lvm since I wont test anything else
Pojiku said:
Thanks Maxwen, this is impressively stable for an early test! A lot of force closes start when adding GAPPS, but some of these can be mitigated by granting all permissions to them in Settings > Apps.
Click to expand...
Click to collapse
gapps are a PITA with 6
make sure you do a factory reset before flashing gapps
StormTrooper89 said:
Right now im exploring it and notice battery optimization is not there yet? Whenever i enable it for all apps it will revert back.
Click to expand...
Click to collapse
details please
i can switch that voodoo setting on and off