[q] Headphone controls - Galaxy S III Accessories

I prefer my controls on my headphones to skip tracks instead of adjusting the volumes. Is there any way to change that or is the only solution to download an app for it?

I user poweramp and with that you can easily go to the next track by holding the mute button for about a second. There is also an option to change it to a double/triple click combination.
My sgs1 worked this way as well, however I used CM7/9 with it.

Related

REQUEST - Volume Control

Ive been searching everywhere for this but either nobody has thorght about it or its not possible.
with my Touch HD the volume is far to loud to listen to music as background music or through earphones and the HTC volume control step size for the volumes is too big. its either off, medium, loud or very loud!
the default WM6.1 control is even worse!
i know that you can use your finger to adjust the HTC volume control but this still isnt sensitive enough for me.
and i also know that it is possible to adjust the volume through tweak HD or advanced config. only problem with that is that I want to be able to chose to listen to very quite music or turn it up very loud without having to go through one of those settings.
so i was wondering if anybody could make a program that either has a large step size or a user defined step size for the volume and that is activated/volume through the volume buttons.
Thanks!
P.S sorry if this is in the wrong section or if there is a requests thread but i couldnt find it.
Ok i havnt found exactly what i wanted but i did find this:
http://handheld.softpedia.com/progDownload/Volume-Control-Download-35536.html
this is an aplication which lets you choose the volume with 100 steps. and it works from the system volume so using somthing like nitrogen or media player there is another 100 steps giving me 10000 steps haha
the bad points are that you must go into filemanager and manualy start it. and even then it does not work with the volume buttons.
(if anyone knows of a way to start this when powering on the device that could be useful!)
its good but not ideal.
if anyone else can come up with somthing better speak up!
create a shortcut to the exe and add it to /device/windows/startup ?
Yep, would be nice if the volume rocker can use this little tool.
Hello,
Any news on that topic ?
Thanks
I have the same problem, i think the stepsize can be changed in the registry but i dont know where i could find this.
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
The problem is, if youre using the E100 headset (or just want to press a button in your pocket to adjust volume) it would be nice if it'd adjust 1 step instead of 3 when pressing volup or voldown..
If youre moving and just want to adjust volume its really annoying to get your phone out of your jacket/pocket, pull out your stylus and lower your volume to 1..... might be just me that is a lazybones, but still!
With Good intra headset, even one bar is too much. Is it a WM limitation that the stepsize is that big ?
khanms said:
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
Click to expand...
Click to collapse
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Same issue here. The minimum volume is still way too high. It's a waste of battery and could hurt your ear if you use in-ear earbuds.
Riceburner said:
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Click to expand...
Click to collapse
As an addition.... I think this "too much volume" thing is something to do with the HTC TF3D music player itself.
On my (stock Rom) HD - I can listen to the FM radio at "normal" volume levels (ie about halfway up the range), but with the TF3D player - I have to turn it right down again.
Haven't tested it with other players (eg TCPMP).
Another request for a better solution to volume control.
bumpity
I have the same problem, ever since getting a set of in-ear MM50 (Sennheiser).
Too loud!
Any ideas?
gromitt said:
Another request for a better solution to volume control.
Click to expand...
Click to collapse
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
fulham said:
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
Click to expand...
Click to collapse
i just proud of my name is being posted by other
None of these thins work with noise isolating headphones where 1 bar is too loud. As soon as the phone starts to ring you are deafened as the volum is A LOT LOUDER than the music. I have the same problem with WMP as I can set a low volume in system, 3 bars, and 15-40% in WMP or an other program and the music is fine but as soon as the phone rings it absolutely kills!
man if someone solves this they'll make a few insta-friends !
We need a fix.
Many this app will help some, if not all of you !
It's a freeware developed by a member of this forum and it serves the simple purpose of allowing to set "volume steps" and replacing the default volume window. It's brilliant.
Work is still in progress, but it's already a must have at this point
http://forum.xda-developers.com/showthread.php?t=598997

Adjusting Volume in Music Tab

Hey guys,
I have an issue where i am unable to change the volume when listening to music via the music tab in manilla (using 2.1 atm). The volume rocker changes the system volume, but the music does not get any louder or quieter, unless i put the device into silent or vibrate. The music tab doesnt have any volume controls either (an oversight imo). Can anyone advise me with how i can adjust the volume?
Thanks
Any ideas?
Volume rocker changes music volume fine on mine. Check on the thread for your rom, perhaps others have had similar experiences and can help you.

Repurpose the Volume Rocker

Any way to make this do something outside of volume?
I never change mine (outside of vibrate mode which I use a widget for anyway) and figured I'd see if I could get anything useful out of it.
Does you used rocker for navigation and music volumed?
I don't know how I would use it for navigation, but I don't really ever need to change my music volume, and if I did I use audiomanager.
I'm interested in ether keeping the buttons from accidentally changing my settings, or finding a new use for it.
it would be sweet if you could use it as the shutter button in the camera app
bumping this to see if anyone has any ideas. I'm sick of accidentally hitting the vol rocker and changing my ringer volume.

Stock volume app

Ever since I've changed to the AOKP or Paranoid-AOKP-Kang rom, I've noticed that even at the lowest setting (1%) my music volume is way too loud & when I have my headphones on it's all the much louder. I had to download an app called Fine Tune Volume v2 which allows me to adjust the volume in smaller increments. Is there a way or can someone share a way to make the stock volume controller work in the same manner?
Anyone?
Okay another question: Is there a way to remove the stock volume controller & have/use a 3rd party volume controller (like the one I downloaded) without having a bunch of force closes or errors?

app to control Volume with the Ring

I am kind of perplexed about the Media app built into the Galaxy Watch. It works fine, but on the display there is a Foward and Back track button, but the ring controls this also, why do I have to click the volume button to control the volume! Why cant there either be a button on the main screen of that app or let me use the ring!
I have been looking all over for an app that would let me control the volume with the Ring but to no avail on the Samsung store. Any ideas?
would be super helpful! then you would have one screen control everything!
Because it makes more sense to think that normally most people the first thing they do is press play and set the volume they want. Once set the thing they are going to use more often is the next and previous track and not the volume control.
You may think "but why?"
These days most of the audio we get on apps like Spotify, iTunes and others don't have big variations on loudness from one track to another and/or they include settings in the app so you can set them on to normalize the volume, that includes the Samsung music app, making it easier as you don't need to be turning it up and down each time a new song starts.
It could be done? Yes.
Will be? Idk, and really don't care that much because I use more the widget than the app and volume control it's really easy to access when needed in both.
You should try to make the suggestion to give you the option to configure it that way on the Samsung forums or in the galaxy store on the app.

Categories

Resources