Re: [UPDATE][KERNEL][ROM]tFF18 with FF18 repack with AGAT recovery 0.2.1 - Samsung Epic 4G Touch

Re: [UPDATE][KERNEL][ROM]tFF18 with FF18 repack with AGAT recovery 0.2.1
I tried flashing the other day and it gave me this in CWM recovery the other day and it gave me this error:
Formatting Cache...
format ( ) expects 4 args., got 3
E: error in /sdcard/tFF18_v0.1.0.zip
(Status 7)
Installation Aborted.
This error appears on every rom i try to flash exept for CyanogenMod. Any help would be greatly appreciated
Sent from my SPH-D710 using xda premium

ora282 said:
I tried flashing the other day and it gave me this in CWM recovery the other day and it gave me this error:
Formatting Cache...
format ( ) expects 4 args., got 3
E: error in /sdcard/tFF18_v0.1.0.zip
(Status 7)
Installation Aborted.
This error appears on every rom i try to flash exept for CyanogenMod. Any help would be greatly appreciated
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I had to do some searching for this. usually status 7 is a bad download. have you ran an MD5 checksum to see the file's integrity? Also though i need alittle backround. what were you flashing? how did you download it phone or PC? Usually to flash ICS use el29 direct boot kernel tar file in odin or mobile odin. then wipe everything and then try flashing. that's if your on CM9 going to a TW ICS Rom.

ora282 said:
I tried flashing the other day and it gave me this in CWM recovery the other day and it gave me this error:
Formatting Cache...
format ( ) expects 4 args., got 3
E: error in /sdcard/tFF18_v0.1.0.zip
(Status 7)
Installation Aborted.
This error appears on every rom i try to flash exept for CyanogenMod. Any help would be greatly appreciated
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Chris' cwm recovery gives this error for some reason. Use agats recovery and it will flash
Sent from my SPH-D710 using Tapatalk 2

Thanks for that. Didn't know it was an issue. I only use agats recovery.
Sent from my SPH-D710 using xda app-developers app

Thanks guys i'll give agat's kernal a shot.
Sent from my SPH-D710 using xda premium

ora282 said:
Thanks guys i'll give agat's kernal a shot.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
If i were you, after flashing agats rom, go back to Chris' recovery because agats recovery breaks a small number of apps. Make sure you are not using chris' new recovery from source though, that only works with aosp roms.
Sent from my SPH-D710 using Tapatalk 2

Related

[Recovery]ACSRecovery5 1.0.0.0

ACSRecovery was originally based on CWM4 and for the Epic 4G. I updated it to CWM5 source base, and Also ported it to ET4G.
It has menu optimizations to be more efficient
New reboot menu
PreROM wipe that wipes /data and caches
PreTheme wipe that wipes caches
ACS Branding
Various underhood tweaks.
All builds will be here:
http://chris41g.devphone.org/index.php?dir=EpicTouch/ACSRecovery/
Thanks to QBKing77 for the Review & How-To:
http://www.youtube.com/watch?v=anjwB9mhn3Q
Maybe I can talk someone into getting some screenshots..
love that this is back, thanx sir.
darren.wlsn1 said:
love that this is back, thanx sir.
Click to expand...
Click to collapse
Always the first thing on my OG Epic after a clean flash via Odin.
Sent from my SPH-D710 using xda premium
Anyone know how to flash this without ODIN? Also can't flash via cwm because of a "signature verification failed" error. I could
Flash_image recovery acsrrcovery.img
If I knew where the recovery was.
Sent from my SPH-D710 using XDA App
CBowley said:
Anyone know how to flash this without ODIN? Also can't flash via cwm because of a "signature verification failed" error. I could
Flash_image recovery acsrrcovery.img
If I knew where the recovery was.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
If I was you I would try to download it again. I installed it in recovery with no problem at all
Sent from my SPH-D710 using xda premium
Thanks Chris this is a great recovery I never used it before but I like how you have it setup . Great job
Sent from my SPH-D710 using xda premium
CBowley said:
Anyone know how to flash this without ODIN? Also can't flash via cwm because of a "signature verification failed" error. I could
Flash_image recovery acsrrcovery.img
If I knew where the recovery was.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
turn off sig verification, or unzip the cwm-flashable, and use DD to flash it
What kernel is this based on? I really like your recovery and I was wondering if I needed to flash the EK02 kernel again after updating to your recovery?
Potential mod, version, or port to the OG Epic!?...that new compatable ROM manager version just doesn't stick...I wind up in ACS CWM4 version and have to flash a zip everytime I want to use CWM5...smh
Sent from my rooted, suited, & booted Epic 4G #knowdat!
ElAguila said:
What kernel is this based on? I really like your recovery and I was wondering if I needed to flash the EK02 kernel again after updating to your recovery?
Click to expand...
Click to collapse
Its stock repacked EF02 with ACS Recovery. You flash this and you're all set unless I am in the wrong thread but I don't think I am. After you flash it, go to settings /about phone and check there
Sent from my SPH-D710 using xda premium
hey guys im in need of some help! im trying to help my friend root his phone and get cwm all in one im not a noob i know my way around odin and instaling kies now i tried getting some help on rootswiki but cant get a response i was looking at the ACS RECOVERY clockworkmod thread that was posted thier but that just redirects me to the acs website where i odin the cwm tar and than flash the root file throug cwm do i do the same method for this?? im just trying to give hime the most current PLEASE HELP THANKS
dc iz 2 legit said:
hey guys im in need of some help! im trying to help my friend root his phone and get cwm all in one im not a noob i know my way around odin and instaling kies now i tried getting some help on rootswiki but cant get a response i was looking at the ACS RECOVERY clockworkmod thread that was posted thier but that just redirects me to the acs website where i odin the cwm tar and than flash the root file throug cwm do i do the same method for this?? im just trying to give hime the most current PLEASE HELP THANKS
Click to expand...
Click to collapse
That should work just fine. Just think of the ACS Recovery as a streamlined version of CWM with quicker options to wipe
Sent from my SPH-D710 using xda premium
Uploaded ACS5 repacks for all builds..
Sent from my SPH-D700 using Tapatalk
Anyone having issues with ADW Launcher EX after this is flashed? I flashed this and the Blazer ROM and am not sure what is causing my bootloops whenever I load ADW launcher EX onto my phone. Any help is appreciated. I am going to post this in that thread as well.
chris41g said:
Uploaded ACS5 repacks for all builds..
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Any updates made to the recovery? On 1.0.0.0 wipe data does not appear to be working. Also when you backup to internal SD it skips android_secure because it is looking for it on internal SD.
AJordanWise said:
Anyone having issues with ADW Launcher EX after this is flashed? I flashed this and the Blazer ROM and am not sure what is causing my bootloops whenever I load ADW launcher EX onto my phone. Any help is appreciated. I am going to post this in that thread as well.
Click to expand...
Click to collapse
No issues on ADW EX here but I am not on that ROM
Sent from my SPH-D710 using xda premium
Thanks for thr recovery first off
Second im currently running cwm latest and im installing the zip thru cwm it successfully installs and switches over to acs recovery but when I reboot and go back in to the recovery again cwm is there and not acs recovery idk why this is happening can anyone give me some ideas thanks in advance
Sent from my SPH-D710 using XDA App
vash469 said:
Thanks for thr recovery first off
Second im currently running cwm latest and im installing the zip thru cwm it successfully installs and switches over to acs recovery but when I reboot and go back in to the recovery again cwm is there and not acs recovery idk why this is happening can anyone give me some ideas thanks in advance
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
It does this when you power down then boot to recovery with volume up and power?
Sent from my SPH-D710 using xda premium
JohnCorleone said:
It does this when you power down then boot to recovery with volume up and power?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yes it goes to cwm instead of acs recovery even tho I flashed the acs recovery zip file with cwm
Sent from my SPH-D710 using XDA App
vash469 said:
Yes it goes to cwm instead of acs recovery even tho I flashed the acs recovery zip file with cwm
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
That is strange indeed. Did you try wiping Cache partition and Dalvik cache and reflashing the zip?
Sent from my SPH-D710 using xda premium

Cannot install any AOKP/CM9 rom anymore?

Everytime i try to install a AOKP rom or CM9 Alpha 4 rom which i previously had no issues doing, but now i get assert failed: getprop("ro.product.device") and a bunch of gibberish in the recovery and cannot continue with the install of the zip files.. ive tested the MD5 checksum and they're good downloads and i cant seem to figure out whats going on.. im wiping everything and im using the EL26 stock recovery to flash...
Instead of wiping, flash caulks format all, then rom and gapps
Sent from my SPH-D710 using xda premium
ya use calks format all do not use cwm or acs to whip data! it can lead to a brick on ur phone make sure also u have all the gapp files right and make sure odin properly went through.
You should be using clockwork recovery not stock
Sent from my SPH-D710 using xda premium

Can not flash any rom

having issues flashing d2tmo roms i can only flash frosty slim 2.6.0 d2att? i have tried using twrp and updating my cwr. any help would be appreciated
davidjz87 said:
having issues flashing d2tmo roms i can only flash frosty slim 2.6.0 d2att? i have tried using twrp and updating my cwr. any help would be appreciated
Click to expand...
Click to collapse
Is it a Tmobile phone? or Wind or Mobilicity variant?
Is it rooted? How did you root?
Did you try installing a different recovery manager to flash roms with?
Did you try Odin?
Did you bring it back to 100% factory to try fresh from scratch?
sidmuer said:
Is it a Tmobile phone? or Wind or Mobilicity variant?
Is it rooted? How did you root?
Did you try installing a different recovery manager to flash roms with?
Did you try Odin?
Did you bring it back to 100% factory to try fresh from scratch?
Click to expand...
Click to collapse
its a tmobile phone. i rooted with Samsung GS3 tool kit. yes i tried using twrp and cwmr and both give me an install fail.
Try using Mobile Odin to flash.
Also you could use MrRobinsons root66 UVALH2 with odin to go back to factory stock but rooted. Then install your recovery and try again.
Sent from my SGH-T999 using xda app-developers app
Are you sure the roms are completely downloaded. Have you checked the md5?
Sent from my SGH-T999 using xda app-developers app
i was able to flash 2 roms gigajoule n frosty slim 2.6.0 d2att. it seems i cant flash any cm10 roms
Turn off signiature verification?
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Turn off signiature verification?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
i tried that too .
i get a message saying:
assert failed: getprop(ro.product.device') = = "d2tmo"
E;error in / external_sdcard/liquid - jb-v2.0-Rc3-d2tmo
(status 7)
ive tried everying :crying: could i edit the buildprop?
i finaly got it i reflash stock recover and rom re rooted using tool kit and and re download rom manager and udated to 6.0.1.2 except this time it gave me an option for galaxy s3 tmobile before it didnt .. thank you guys for the help
davidjz87 said:
i tried that too .
i get a message saying:
assert failed: getprop(ro.product.device') = = "d2tmo"
E;error in / external_sdcard/liquid - jb-v2.0-Rc3-d2tmo
(status 7)
ive tried everying :crying: could i edit the buildprop?
Click to expand...
Click to collapse
I believe this happened because this line in build.prop was changed:
ro.product.device=d2tmo
It couldve been changed by the rom dev, a mod, or you may have changed it to gain compatibility for the play store, or other app.
If you see that again, look for that line in build.prop and make sure its d2tmo.
It could be something entirely different, as well. But thats the first place id look.
Sent from my SGH-T999 using xda app-developers app

Can someone help please

I was on cm10 build 10-12 and tried to update to 10-18 and something happened.. it would not start and now when I boot into recovery CWM it says "E:can't open /cache/recovery/log" and "E:can't open /cache/recovery/last_log". Now when I try to flash a zip just just says its flashing and freezes.. also if I try to wipe data/factory reset is gets stuck formatting. I was alble to flash back to a old rom but now it seems I can't flash anything else. I'm at a loss
Sent from my SGH-T679 using xda app-developers app
HoustonsBirdman said:
I was on cm10 build 10-12 and tried to update to 10-18 and something happened.. it would not start and now when I boot into recovery CWM it says "E:can't open /cache/recovery/log" and "E:can't open /cache/recovery/last_log". Now when I try to flash a zip just just says its flashing and freezes.. also if I try to wipe data/factory reset is gets stuck formatting. I was alble to flash back to a old rom but now it seems I can't flash anything else. I'm at a loss
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
Odin flash CWM, then flash the recovery you want. I highly suggest TWRP 2.3.1.1.
Sent from my SGH-T989 using xda premium

Can't flash modem

Everytime I try to flash a modem using CWM,I get an Aborted/error message that says:"script aborted(no error message)E:Error in /sdcard/download/FI27.zip
(status 7)
Does anybody know how to fix this?!
Sent from my SPH-D710 using xda app-developers app
QUIQUE1978 said:
Everytime I try to flash a modem using CWM,I get an Aborted/error message that says:"script aborted(no error message)E:Error in /sdcard/download/FI27.zip
(status 7)
Does anybody know how to fix this?!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
What recovery are you using?
Sent from my SPH-D710 using xda app-developers app
Are you wiping your Cache and dalvik?
Sent from my SPH-D710 using XDA
QUIQUE1978 said:
Everytime I try to flash a modem using CWM,I get an Aborted/error message that says:"script aborted(no error message)E:Error in /sdcard/download/FI27.zip
(status 7)
Does anybody know how to fix this?!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
First off hope you're not using ROM manager - that doesn't work with this device and has been know to brick it.
Sounds like you are. and if not...
As Blues already asked, What recovery are you using.
Also if you are using Mobile Odin you also cannot flash modems with it.
Also more unasnswered questions:
What ROM are you on? GB, ICS, JB?
What Kernel? And what recovery with that kernel?
What modem where you trying to flash.
What steps did you actually take to get into recovery
Toggle Script Asserts to Disabled if it is the same FI27.ZIP from xda then it is a good file. I've used it. Look below on the menu when you get to ”select zip” you want to install. Should show enabled or disabled when you select the script asserts toggle.
Sent from my SPH-D710 using xda app-developers app
QUIQUE1978 said:
Everytime I try to flash a modem using CWM,I get an Aborted/error message that says:"script aborted(no error message)E:Error in /sdcard/download/FI27.zip
(status 7)
Does anybody know how to fix this?!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Guessing you figured it out.....
If you ask a question it's a great help to all if you post a follow up. That's how a forum works.

Categories

Resources