Which car mount should I get? - Galaxy S III Accessories

I have a drop low car that if you go through train track it will bump you off your seat. So I need a car mount that will have the least vibration. Here are two I found on ebay. If any of you have purchase one or other please give a brief description of your experience.
1: http://www.ebay.com/itm/Samsung-GUN...070739?pt=PDA_Accessories&hash=item3379e03c53
2: http://www.ebay.com/itm/New-OEM-Sam...163139?pt=PDA_Accessories&hash=item2a20d08603

ProClip. They have the most solid mount system I have ever used.
Sent from my SPH-L710

I pre-ordered two of these: iBolt Galaxy S III Charging Dock
For a completely vibration free driving experience the ROK Solid mount is included, featuring a strong 70 mm suction cup. Attach to windshield, or use the included disc to place on dashboard. A ball-joint connector system allows the driver to adjust to almost any viewing angle. The female ball connector is an “industry standard” 17 mm size, allowing any dash, vent or bike mount designed for Garmin to work with the cradle as an alternative to the suction mount.
Click to expand...
Click to collapse

+1 for ProClip. I find mine rock solid, and it is better located in my car than a suction cup or CD mount would be. The big con is that it's likely the most expensive mount on the market. Still, I'm glad I went with it.

I'm going to be going with the ProClip once I get my phone for both myself and my fiancee. It looks like it's great and will fit both of our cars. I still have my old suction cup mount that I've been using for a couple years now that I think would work well enough when I want to do dashcam stuff.

I just received my ProClip mount last week and it is quality as usual. I've had them for at least five different devices, so I knew what to expect. I got the one that is wired for power, very convenient.

Does the proclip offer a landscape mounting option?

I have just bought the Samsung car dock. While some may say its not a well built as say the proclip ones. My logic is, should the dock fail, i can at least say Samsung it was your dock that failed. The samsung dock seems very good tho and has performed well on the bad roads i have near me.

I got a universal mount from DX (SKU 81246 if the link does not work). It works well and was inexpensive. That being said, I had the Samsung mount for my Fascinate which would put the phone into car mount mode when you plugged it into the micro-USB which IMHO is superior to any of the universal mounts in many ways. Anybody know if Samsung will be releasing a mount like this for the S3?

CZ Eddie said:
Does the proclip offer a landscape mounting option?
Click to expand...
Click to collapse
I have the powered ProClip dock that plugs into the socket on my dash (not the one you have to wire in). Mine holds my phone tightly enough to use in landscape, and that is how I keep it. I slide the phone in and out from the right side, and it works great.

I am using the iOttie mount and it is perfect. Easy to setup and move if needed and the phone sits securely inside. You can do landscape or portrait mode for your phone.
Not a powered solution however.
http://www.amazon.com/gp/product/B007FHX9OK/ref=oh_details_o02_s00_i00
19.99 (and Prime) here at Amazon.

I'm working on a rear view mirror mount for the SGS3 (and others)
works great and keeps the phone out of driving view while keeping it where the eyes can see it.
I will post pictures later for anyone interested.

CZ Eddie said:
Does the proclip offer a landscape mounting option?
Click to expand...
Click to collapse
It is a tilt/swivel mount so you can have it either landscape or portrait. I keep mine in portrait but I have tried it landscape and it was still very solid.

iBOLT dock with car mode & integrated 9 ft cable...
Our iBOLT Dock (www.ibolt.co/ibpf-33307) works the same way as the old S2 car dock. It puts the phone into car mode (sVoice) but you can download the CarHome Ultra and this application will install itself as the default app opening when inserted into the Dock if you want. With CarHome you can drag and drop apps, short numbers or just about anything to your car home screen.
The dock also comes with a 9ft (yes, 2.7 meters!) long charging/aux-out cable. This allows you to place the Car Dock on the left side of the steering wheel and tuck the cable down the drivers door, under the carpet and up to the center console for USB charging and 3.5 aux-in. The home screen also turn horizontal. Look the video and see if this is an option... Feel free to contact us and ask questions.

Related

Droid 2 AC Vent Car Mount!

Here's a review of the Droid 2 AC Vent Car Mount:
http://droid2accessories.com/droid-2-accessories/droid-2-car-mount-review/
Works fine!
i like it...but see..the only problem i see is the little leg below...i own a 240...and unlike ur SUV...it desnt have a section that stick out below the AC center vents...its all flush
pic for reference...not my car
http://www.superstreetonline.com/featuredvehicles/130_0604_1989_nissan_240sx/photo_12.html
sigh...
Proclip is what you want. proclipusa dot com.
Get the car specific base mount for your ride, and then pick up either a "ball" mount (i.e. ball and socket - Garmin Nuvi 660 piece will work), or look at the "dual prong T" mounting clip with tilt-swivel. This should fit into the back of the OEM car mount (just slide this in instead of the supplied bits). I haven't tested the dual-prong T thing, but it looks like it should work.
I have tested the ball and socket method and it does work, although it's not quite as snug as I'd like. Proclip's swivel adapters are a lot more secure / stiffer.
Especially with the D2, where the mount is way more elaborate. The original D1 mount worked better with the ball & socket setup since it was lighter.
i found this one during my search
http://cgi.ebay.com/ws/eBayISAPI.dl...&_trkparms=algo=LVI&its=I&otn=2#ht_2177wt_911
its looks to be D2 specific...so ill post up some pics once i get it
I've been using Pro-Clip for years (ATT 8525, Tilt, Fuze, VZW TP2), so I've got the vehicle mount already.
I picked up the OEM D2 mount, but was still scratching my head on how to mount it to the Proclip vehicle mount (I HATE suction cups on the windshield). So, I just ordered the two-prong T plate
http://www.proclipusa.com/store/pro...)-mounting-plate-with-tilt-swivel-215199.aspx
Looks like it should work great - will see in a few days when the order arrives.
Finally got the two-prong plate for the proclip mount and put it on last night. The OEM car mount cradle fits it like a glove, and I've got the ability to adjust for angle too! Definitely a great way to go (although not cheap when I add up all the individual components).
Now to figure out just which apk's to rename to disable that ghey "Cardock" app - the media player it links is TERRIBLE!
I know this is an old thread, but I got a Proclip and love it. Just wanted to say thanks for the lea.

Samsung official car dock

Hey I have not seen it posted yet but the official samsung car dock is out for $50....
Sent from my SAMSUNG-SGH-I897 using XDA App
xpeppyx said:
Hey I have not seen it posted yet but the official samsung car dock is out for $50....
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
LINK ? ? ?
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-M981BEGSTA
Sent from my SAMSUNG-SGH-I897 using XDA App
Still overpriced.
Newegg has it for $34.99. http://www.newegg.com/Product/Product.aspx?Item=N82E16875998664
I have the BodyGlove case from ATT, does anyone know if I'd have to take the phone out of the case to put it into this dock?
badabam1 said:
I have the BodyGlove case from ATT, does anyone know if I'd have to take the phone out of the case to put it into this dock?
Click to expand...
Click to collapse
Judging from the pictures, it looks like you probably do have to take it out of the case. It seems to be a pretty snug fit. I haven't been able to find any reviews/feedback about the car dock, tho. So I can't confirm.
Finally available, I'll probably get it from the egg. Does anyone know if the phone detects that it is in a dock as apposed to just being plugged in?
Sent from my SAMSUNG-SGH-I897 using XDA App
Now you can watch your non-functioning GPS with ease while on the go!
trekie86 said:
Finally available, I'll probably get it from the egg. Does anyone know if the phone detects that it is in a dock as apposed to just being plugged in?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
The desk dock does trigger the phone to pull up either desk home or other things like some dock clock apps. I'd imagine the car dock will either will do the same thing, or know that's it is the car dock and do something specific to that.
One annoying thing on the desk dock is it has an audio out port, which would be great as the speaker is hard to hear considering the dock fits nice and snug. But they also give a nice announcement paper with the dock saying the audio out feature will work when Froyo is released for the phone.
With all the background noise in a car, audio out would be even more important. Since they seem to have cut a hole out in the mount where the speaker is, I'm guessing they're going the practical route with it and not counting on Froyo.
Voicebox said:
...
With all the background noise in a car, audio out would be even more important. Since they seem to have cut a hole out in the mount where the speaker is, I'm guessing they're going the practical route with it and not counting on Froyo.
Click to expand...
Click to collapse
That's where the bluetooth comes in handy.
TexUs said:
Now you can watch your non-functioning GPS with ease while on the go!
Click to expand...
Click to collapse
Not if you get one of these.
http://www.amazon.com/gp/offer-listing/B000HZI2YY/ref=dp_olp_new?ie=UTF8&condition=new
Got mine on sale for $15.
Reefermattness said:
Not if you get one of these.
http://www.amazon.com/gp/offer-listing/B000HZI2YY/ref=dp_olp_new?ie=UTF8&condition=new
Got mine on sale for $15.
Click to expand...
Click to collapse
That's interesting so this pretty much proves the GPS issue is because of the hardware in the phone, right?
TexUs said:
That's interesting so this pretty much proves the GPS issue is because of the hardware in the phone, right?
Click to expand...
Click to collapse
Thats what I thought at first too, but Im not entirely sure. The TomTom has its own GPS software in it as well, so you're bypassing the i987 entirely, both software and hardware. There is an app called "Bluetooth GPS Provider" that just reads what the TomTom is transmitting and uses it instead.
I received the Samsung Captivate Vehicle Mount and I'm very impressed with the quality of the piece. I had been using one of the generic mounts (mGrip) and although it did it's job, I wasn't satisfied. Most generic mounts use a flexible gooseneck stalk to hold the phone. This flexibility allows the phone to bounce and vibrate - it's just not steady.
There is no flexibility in the Samsung mount. No bobbing and weaving . . . none!! The phone is positioned in the mount securely and accurately, and once the phone is installed the piece with the power usb connector slides into the phone to secure the connection. There is also an external speaker jack that will become functional once we receive froyo 2.2.
When the phone is put into the mount and the mount connector piece is slid into position to mate with the phone, the phone automatically goes into the navigation desktop providing 5 large icons for the navigation functions.
The mount comes with a car charger cord included, no need to purchase one separately. Price is kind of high at $50, but it will be cheaper on eBay or discount sides if you're willing to wait awhile longer.
If you're looking for a high quality mount that provides an exact fit for your phone, proper automatic insertion and alignment (via the sliding power bracket) of the mini-usb connector and rock solid stability, this unit is the one to get.
Be aware that this mount will ONLY work with the Captivate - the other Galaxy S phones will not fit. AND Samsung mounts for the other Galaxy S phones will not work with the Captivate because of the case shape differences and the differing positions of the usb connector.
Hope this helps those looking for a vehicle mount for their Captivate.
Reefermattness said:
Thats what I thought at first too, but Im not entirely sure. The TomTom has its own GPS software in it as well, so you're bypassing the i987 entirely, both software and hardware. There is an app called "Bluetooth GPS Provider" that just reads what the TomTom is transmitting and uses it instead.
Click to expand...
Click to collapse
Hmmm...
I guess the question is... Where does it do the GPS calculations at- the software that runs on top of the OS or the driver that runs below it? I don't know enough about it to know for sure- but if we knew it should help narrow it down.
gary1949 said:
I received the Samsung Captivate Vehicle Mount and I'm very impressed with the quality of the piece. I had been using one of the generic mounts (mGrip) and although it did it's job, I wasn't satisfied. Most generic mounts use a flexible gooseneck stalk to hold the phone. This flexibility allows the phone to bounce and vibrate - it's just not steady.
There is no flexibility in the Samsung mount. No bobbing and weaving . . . none!! The phone is positioned in the mount securely and accurately, and once the phone is installed the piece with the power usb connector slides into the phone to secure the connection. There is also an external speaker jack that will become functional once we receive froyo 2.2.
When the phone is put into the mount and the mount connector piece is slid into position to mate with the phone, the phone automatically goes into the navigation desktop providing 5 large icons for the navigation functions.
The mount comes with a car charger cord included, no need to purchase one separately. Price is kind of high at $50, but it will be cheaper on eBay or discount sides if you're willing to wait awhile longer.
If you're looking for a high quality mount that provides an exact fit for your phone, proper automatic insertion and alignment (via the sliding power bracket) of the mini-usb connector and rock solid stability, this unit is the one to get.
Be aware that this mount will ONLY work with the Captivate - the other Galaxy S phones will not fit. AND Samsung mounts for the other Galaxy S phones will not work with the Captivate because of the case shape differences and the differing positions of the usb connector.
Hope this helps those looking for a vehicle mount for their Captivate.
Click to expand...
Click to collapse
Thanks for the review bud, I ordered one myself from the Egg. Taking my Rocketfish (temp solution, it worked ok) one back ASAP.
I prefer the style from the samsung website. But its just to expensive.
This is my captivate. There are many like it but this one is mine.
Voicebox said:
The desk dock does trigger the phone to pull up either desk home or other things like some dock clock apps. I'd imagine the car dock will either will do the same thing, or know that's it is the car dock and do something specific to that.
One annoying thing on the desk dock is it has an audio out port, which would be great as the speaker is hard to hear considering the dock fits nice and snug. But they also give a nice announcement paper with the dock saying the audio out feature will work when Froyo is released for the phone.
With all the background noise in a car, audio out would be even more important. Since they seem to have cut a hole out in the mount where the speaker is, I'm guessing they're going the practical route with it and not counting on Froyo.
Click to expand...
Click to collapse
If you look at the pictures on newegg (they let you zoom), you will see that it has an audio out. I did order mine yesterday, should have it soon, it ships from their NJ warehouse.
gary1949 said:
There is also an external speaker jack that will become functional once we receive froyo 2.2.
Click to expand...
Click to collapse
I assume you're reading that from the included instructions. If so, that would make two places (home dock) where Samsung has mentioned in writing their intent to provide the update of Froyo to Captivate owners. They need to get it out already.

My Tbolt Car Mount Install Acura MDX

I just wanted to share my car install experience. Notice that I only used the holder portion of the mount, and I cannot swivel to landscape mode. This works for me since I already have built in Acura navigation, and I mainly use my Tbolt for streaming MOG radio which is portrait mode only. This install location works perfectly for lack of glare, cable placement, accessibility, and allows me to keep my focus on the road.
** note: I used an agressive mounting tape capable of holding up to 5lbs and dealing with high temperatures. This is available at Home Depot in the paint department for $4. I mounted the car holder directly to the fake black wood panel that has a glass finish gloss surface. PLEASE do-not blame me if you ruin the $95 panel should removal cause the fake wood to crack, etc.
1- The car mount is at Verizon stores & online part # HTC6400MNT for $29.
2- The micro USB port on the mount has two metal dimples that are evil and require WAY too much force to install & remove the Thunderbolt. I recommend using a single edge flat xacto blade to remove as much of the dimples as possible. Once removed the Thunderbolt slides on and off the mount properly.
3- ******* Before mounting!!! Attach the micro USB power cable & route the audio cable and choose a location that allows the mount to remain flat against the surface & gives the audio cable enough play to be connected & removed.
4- Prep both surfaces with alcohol to remove any surface contaminants.
5- Remove the double side adhesive mounting tape covering and carefully align and lightly press the mount on ONE tiny leading edge only... allowing you to slightly adjust alignment prior to fully pressing the mount into place. **It's strong adhesive and you only get one shot so be careful.
This process has worked perfectly for my needs, and the mount is rock solid. I have a full view of the screen from my seating position, easy reach to the display, and as much as I wish the micro USB port on the mount passed audio.. it's really not a big deal dealing with the audio plug.
I hope this helps and streaming 320Kbs from MOG's 10 million database of music over 4G is such a thrill. They currently have a major Android player bug but an update will release soon.
Wow.. looks good!
Dude MOG on Android has sucked since day 1. Hopefully they will get it straightened out one of these days, I gave up.
Nice job - looks very similar to mine except I went horizontal down by the AC controls (Explorer) and switched to the Google Car Home - it is sweet. I like the 90 degree cable - where is it from?
6 foot 3.5mm male to RCA male cable
I got very lucky and found this at Radio Shack... even the inept sales guy kept saying it didn't exist... then I located exactly what I needed on his rack It might be easier to find it online & get it shipped. If I can pull the package out of the trash I'll replay to this thread with the Radio Shack part number.
The clearance between the car mount plastic & the 3.5mm jack of the Thunderbolt is very tight. Fortunately this cable has a thinner section closer to the base of the metal jack allowing it to clear the plastic of the mount.
Re: MOG... yes I'm relaying email to their Android staff daily. Fingers crossed as the audio quality & features are much better than Pandora One.
boingboingbilly said:
Dude MOG on Android has sucked since day 1. Hopefully they will get it straightened out one of these days, I gave up.
Nice job - looks very similar to mine except I went horizontal down by the AC controls (Explorer) and switched to the Google Car Home - it is sweet. I like the 90 degree cable - where is it from?
Click to expand...
Click to collapse
Google car home, is this the same as car dock home? I searched androlib and couldn't find it. Thanks
looks cool
esoteric1311 said:
Google car home, is this the same as car dock home? I searched androlib and couldn't find it. Thanks
Click to expand...
Click to collapse
It's the one made by Google, it's the best - very customizable. You won't be able to find it via market on your phone since it is "incompatible" because of stupid sense. Just download the apk and side load via USB or dropbox. when you choose the car panel app it will prompt you for which app to use - choose the Google one and set to default. Then when you put the bolt in the dock, it will launch google car home.
hubba said:
I got very lucky and found this at Radio Shack... even the inept sales guy kept saying it didn't exist... then I located exactly what I needed on his rack It might be easier to find it online & get it shipped. If I can pull the package out of the trash I'll replay to this thread with the Radio Shack part number.
The clearance between the car mount plastic & the 3.5mm jack of the Thunderbolt is very tight. Fortunately this cable has a thinner section closer to the base of the metal jack allowing it to clear the plastic of the mount.
Re: MOG... yes I'm relaying email to their Android staff daily. Fingers crossed as the audio quality & features are much better than Pandora One.
Click to expand...
Click to collapse
Thanks I'll track one down. I have a regular coil cord but want to hide the aux cable like I did with the power cable. Plus it sticks out just enough to hit my knee - the 90 degree will do the trick though.
Radio Shack 3.5mm to RCA Cable
Goto their website & search for 42-492 and it should come up.
No matter what phone dock I get, I always adapt it to a vehicle specific mount. I hate suction cups and vent mounts
I have my set up nearly the same only in the left bottom corner of my windsheild... I long ago hard wired a dual cigarette charge port to the inside of my dash and have routed power to a couple differnet devices and places using standard car chargers and makes the install seemless...
The next step in my install is to find a 4 conductor 3.5mm male to 2 female 3.5mm adapter or make one myself (one mono and one stereo on the female ends) and hardwire that to a mic element I have and the rear aux input of my car stereo... hopefully this setup will yeild much better speech recognition and usable docked speakerphone calls without buying an expensive bluetooth setup.
nice looking setup
I'm thinking about getting this mount.... What's your thoughts OP? Can you charge the phone? Looks like the bracing covers the USB input.
Kudos for a job well done!
Definitely saving this thread. That's a genius idea. I'll be doing the same with my car soon I'm sure.
Sent from my ADR6400L using Tapatalk
!Warning-Paid Product Placement Ahead!
Hi Guys,
Excuse my brief hijacking of the thread, but I feel this relates to the discussion.
I have recently released a new media player for Android, and the focus is on easy browsing, huge album art and a "no-look" playing screen that let's you control the functions with gestures. There is even an option to keep the screen on if connected to power. Works great in the car.
It's called simplePLAY, and you can see it running on my Thunderbolt here:
http://www.youtube.com/watch?v=N9V8wKmI4YI
Sorry for the interruption.
Josh

[Q] car kit that can rotate to landscape

i have the universal car kit from verizon, and i got it mounted in front of one of my air vents so i can keep the phone cool. the only problem is that it doesn't rotate. has anyone seen a car kit that i can mount in front of the vents that can rotate from portrait to landscape?
this is the kit i have
http://assets1.htchaven.com/images/product_images/accessories/large/1744.jpg
Use the other mount that came with it (3m tape and ARM). Position it in front of a vent and that way it can turn sideways. It has a ball/lock collar that allows 180 rotation. I have the same one.
typing from my bag phone
oh crap, i think i might've thrown it away, nooooooooooooooo!!!!!!!!!!!!
theres an app that will auto rotate the screen check on the market
http://amzn.to/lYnUYB
I have this mount and i love it, it sticks to the dash, window, or vent mount, it rotates 360. and its $14!!!
jakaro said:
I have this mount and i love it, it sticks to the dash, window, or vent mount, it rotates 360. and its $14!!!
Click to expand...
Click to collapse
this is the one i use and love it.
The Thunderbolt specific car dock has the ability to run in landscape or portrait. It also gives you the ability to charge while its docked. I hard-wired in my car dock so I dont have cables running all over. The picture actually shows it in portrait. So my .02c just pay the dough and get the verizon dock. LINK
stedrocklp said:
The Thunderbolt specific car dock has the ability to run in landscape or portrait. It also gives you the ability to charge while its docked. I hard-wired in my car dock so I dont have cables running all over. The picture actually shows it in portrait. So my .02c just pay the dough and get the verizon dock. LINK
Click to expand...
Click to collapse
2 one-hundredths of a cent? Haha but I'm thinking about getting that mount and hard-wiring myself. Then a tasker profile that when the phone is docked it turns WiFi off, GPS on, BT on, and opens Torque. Hmm...maybe a project for this week. Any tips for hard-wiring it? I'm sure I can do that.
bock/charge/external battery cover
Be great to find a charging car dock that works with a case, otterbox preferably
stedrocklp said:
The Thunderbolt specific car dock has the ability to run in landscape or portrait. It also gives you the ability to charge while its docked. I hard-wired in my car dock so I dont have cables running all over. The picture actually shows it in portrait. So my .02c just pay the dough and get the verizon dock. LINK
Click to expand...
Click to collapse
how does it charge while docked. does that mean i don't have to plug my car charger into it?
also, how would it work if i wanted to keep the phone in front of the vent because the only place in the car that i could mount that too is the window and i don't wanna go that route especailly livin in alabama. the highs don't get below 90 degrees, so my phone would be toast
wait a minute you can totally use that mount sideways, ive used it like it many times. loosen the nut on the back of mount and rotate.
I would recommend mounting in front of the vent that way your A/C will be cooling the phone. I've got mine mounted low but would vent mount it if I had to do it again.
I use the Spiderpodium for my TB in the car. Ultimate flexibility!
check out breffo.com
ucpro said:
how does it charge while docked. does that mean i don't have to plug my car charger into it?
also, how would it work if i wanted to keep the phone in front of the vent because the only place in the car that i could mount that too is the window and i don't wanna go that route especailly livin in alabama. the highs don't get below 90 degrees, so my phone would be toast
Click to expand...
Click to collapse
Yes, you will need to plug your car charger into it. There is a pass-thru port on the back of the dock.
In includes a sticky base part that is suction cup compatible; perhaps you could put that on your dash in a location that allows you to bend the arm down over the A/C vent? I have mine mounted in a more conveniently accessible dash location, but if I shifted it to another position I'm sure the arm could hold it over my vent.
Also, it's available on Amazon for slightly less than through Verizon
ucpro said:
how does it charge while docked. does that mean i don't have to plug my car charger into it?
also, how would it work if i wanted to keep the phone in front of the vent because the only place in the car that i could mount that too is the window and i don't wanna go that route especailly livin in alabama. the highs don't get below 90 degrees, so my phone would be toast
Click to expand...
Click to collapse
the official dock has a plug inthe back of it to put the carcharger into. It then puts a port in the bottom of where you place the phone where the charging port in to transfer the power from the input to the output. The thing is that although you can rotate the dock to any degree you want (vertical, horizontal) the phone itself does not actually enter a dock mode so you need to either keep it vertical or you need to have fun reading from the side besides when you use any app that will change to its horizontal mode (maps, navigation, internet, videos, night clock)
This kit is not too bad
Sent from my ADR6400L using Tapatalk
NTATKD said:
I use the Spiderpodium for my TB in the car. Ultimate flexibility!
check out breffo.com
Click to expand...
Click to collapse
wow that thing looks awesome! does it rotate though? if so i might have to get that for $11 from amazon.
I just bought the Macally Mcup car bracket. It won't suit everybody's needs, but it fits the bill perfectly for me. However it will NOT hold a T-Bolt in a case, only bare. But since I only use a silicone skin which slips off in a second, it's a non-issue for me. I also had to dremel a tiny notch in it so I could plug in the USB cable while it's in the dock. But the positioning of it is perfect for my car and me, and it rotates 360*. Cheap enough too at less than 20 bucks shipped from any number of places.

Love the official car dock, need help extending mount length

So I have the official car dock:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K1D9BEGSTA
And love the functionality of not having to plug in power or audio out all the time.
My only issue is that I want to be able to extend the arm length as it doesn't fit any where great in my car.
Has anyone seen a vent mount or extending arm accessory that is compatible with the official holster?
Thanks in advance for any help or suggestions. I'm sure I could get creative with a solution but didn't want to reinvent the wheel if there is something out there already.
Nice! Is that mount horizontal only, or can it rotate to hold the phone upright too?
Bazirker said:
Nice! Is that mount horizontal only, or can it rotate to hold the phone upright too?
Click to expand...
Click to collapse
It can fully rotate 360 degrees and pivot in any direction. The holster is attached to the arm via a ball and socket connection so you have virtually unlimited options of angle etc... and then you just turn a knob to 'lock in' the position you like. I definitely worship the dock, just need a longer arm : (
OK one other question....if you have a case on your phone, do you have to take it off to use the dock? It looks like you would.
I searched around to try and find a longer arm, and no luck
Bazirker said:
OK one other question....if you have a case on your phone, do you have to take it off to use the dock? It looks like you would.
I searched around to try and find a longer arm, and no luck
Click to expand...
Click to collapse
Thanks for trying to help.
You definitely can't use a case.
The fit is meant to be 'perfect' so it's easy to lock in your phone with the microusb plug so power and audio work.
I love it!!! but no case would work.
Unless you can find a way to mount the flat circle to a longer arm and suction to that there isn't a viable arm extension. I have looked also. My maxima gives a long reach to the dock to where I like the mount to sit.
I bought the infuse dock but instead of using the arm that came with it I bought a proclip center console mount for my car. Looks nice and works great although it was expensive. Attached the infuse dock to proclip car mount and a proclip swivel mount.
I have the Infuse mount which I'm guessing has the same design as yours. Anyway, I found that the vent clip mount that I've been using for my Galaxy Tab mates perfectly to the Infuse mount. I can't be positive but this looks like the same vent mechanism.
Looks like I'm not allowed to post links so search for "Black Car Air Vent Holder With Clip For Nokia " on ebay and you should find it for $3.34.
Sorry to be off topic, but does the car dock have a cut out for the camera lens? I'm not sure from the pic.
Subiegsr said:
Sorry to be off topic, but does the car dock have a cut out for the camera lens? I'm not sure from the pic.
Click to expand...
Click to collapse
yep it does. So does the infuse dock. Its on the right hand side of the pic
Mikest1978 said:
yep it does. So does the infuse dock. Its on the right hand side of the pic
Click to expand...
Click to collapse
Awesome thanks! Might have to pick this up then!
so, i have a meta question about this dock. it looks pretty cool, and it *might* work to put it vertically in the space in the center console of my '98 honda accord, hopefully putting it right at my fingertips. that part's a crap shoot however. what i don't understand though is the audio out jack. how the heck does that work?? the audio jack on the phone is at the top, but the audio jack on the dock is on the bottom next to the usb plug. i just don't get how they route the audio out there. this might be a stupid question.
anastrophe said:
so, i have a meta question about this dock. it looks pretty cool, and it *might* work to put it vertically in the space in the center console of my '98 honda accord, hopefully putting it right at my fingertips. that part's a crap shoot however. what i don't understand though is the audio out jack. how the heck does that work?? the audio jack on the phone is at the top, but the audio jack on the dock is on the bottom next to the usb plug. i just don't get how they route the audio out there. this might be a stupid question.
Click to expand...
Click to collapse
The phone only needs to be plugged into the microusb port on the dock for both power and audio to be piped through. The actual headset jack on the phone is not used. So phone goes into dock (just microusb port) then the audio out on the dock will work.
tahlsr said:
The phone only needs to be plugged into the microusb port on the dock for both power and audio to be piped through. The actual headset jack on the phone is not used. So phone goes into dock (just microusb port) then the audio out on the dock will work.
Click to expand...
Click to collapse
The desk dock works the same way. Only USB plugs into the phone, but the audio jack on the back of the dock does route the sound to external speakers.
This dock and mount is way better than that one. Plus ball locking might fit yours.
https://www.gpscity.com/ram-mount-universal-top-clamping-hook-cradle.html
https://www.gpscity.com/ram-mount-cradle-plate-suction-mount-lite-rap-b-166-2u.html
Wow.. I'm glad you posted.. I just started to search to see if audio via the usb was possible and wasn't finding anything. Couple of questions..is there a usb/line out volume adjustment or is it fixed? Also.. I already have a micro usb hard wired in my car.. is it a micro usb on the end of the cigarette lighter adapter? Also are these available at any local stores.. just hoping I could pick one up instead of ordering.. I checked the local Sprint store and they just have the universal mount kits. thanks for any info!
tri0xinn said:
Wow.. I'm glad you posted.. I just started to search to see if audio via the usb was possible and wasn't finding anything. Couple of questions..is there a usb/line out volume adjustment or is it fixed? Also.. I already have a micro usb hard wired in my car.. is it a micro usb on the end of the cigarette lighter adapter? Also are these available at any local stores.. just hoping I could pick one up instead of ordering.. I checked the local Sprint store and they just have the universal mount kits. thanks for any info!
Click to expand...
Click to collapse
the dock that's specifically for the E4G includes a cig lighter power adapter, but the infuse version does not. i have power going to the infuse from cig lighter, then a standard audio cable going from the back of the dock to my car radio. works well. the volume level adjustment has to be done in software. i'm currently evaluating CarHome Ultra, which has configurations so that when you put the phone in the dock, it sets media volume to whatever you desire, then when you remove the phone from the dock, it reverts back to what it was.
---------- Post added at 11:03 AM ---------- Previous post was at 11:00 AM ----------
one thing that kind of baffles me with the dock - when my phones in the dock, if i try to speak commands to it, it seems it can't hear me. the phone's microphone is covered by the adapter block you slide in to lock the phone and make usb connection. i have the infuse dock, but it looks identical to the E4G-specific dock.
does anyone else have trouble speaking commands when docked? it's frustrating, it makes it much less of a hands-free experience than what i was hoping for!
yang704 said:
This dock and mount is way better than that one. Plus ball locking might fit yours.
https://www.gpscity.com/ram-mount-universal-top-clamping-hook-cradle.html
https://www.gpscity.com/ram-mount-cradle-plate-suction-mount-lite-rap-b-166-2u.html
Click to expand...
Click to collapse
How easy is it to snap the phone on there? I have a solution and an Idea I'd like to use and was looking for a dock that the back will screw into a mount I have, this looks perfect but I really want ease of snapping on/off.
tahlsr said:
So I have the official car dock:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K1D9BEGSTA
And love the functionality of not having to plug in power or audio out all the time.
My only issue is that I want to be able to extend the arm length as it doesn't fit any where great in my car.
Has anyone seen a vent mount or extending arm accessory that is compatible with the official holster?
Thanks in advance for any help or suggestions. I'm sure I could get creative with a solution but didn't want to reinvent the wheel if there is something out there already.
Click to expand...
Click to collapse
I ended up modding mine to fit the ProClip car mount I already had. Pics are in the original deal thread if you are interested.
Sent from my SPH-D710 using xda premium
Seems like most people use some form of case (thicker than the zagg)
Does anyone know of a dock like this samsung dock but able to fit a phone with a case? Alternatives (docks that work with a case) dont seem to connect automatically to the micro usb. Just wondering if anyone knows of something that will do both? Shouldn't this exist? am I way off?

Categories

Resources