Develop Bugs

[MOD] [UCALG1/UCALH1] Enable Call Recording

I take no credit for this modification, it is not an original idea nor does it contain original code. It's an adaptation of the modification for the GT-I9300 by wanam which can be found here. I simply made a few slight modifications to accomodate the SGH-I747.
That being said, I have not tested this on anything other than a SGH-I747, running a stock, deodexed UCALG1 or UCALH1.
"CWM" HOWTO
Download the appropriate package for your firmware (eg. UCLAG1, UCALH1)
Boot into recovery.
Make a nandroid backup.
Flash package.
Note: Recordings are saved to /sdcard/Sounds.
Also included are *-Rollback.zip files. These will "revert" or "rollback" this modification, returning you back to the STOCK Dialer (without recording). Be sure to flash the appropriate one for your firmware!

Question, where does it store the recording?
White Hot! GS3.
---------- Post added at 06:11 PM ---------- Previous post was at 05:54 PM ----------
Never mind found it!
White Hot! GS3.

What's the rollback zip for? Is that a revert file in case we want to go back to the original phone?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

baghera1979 said:
What's the rollback zip for? Is that a revert file in case we want to go back to the original phone?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yep, exactly.

Works as stated ! Great Mod for documenting my crazy exwifes calls
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

magn2o said:
Yep, exactly.
Click to expand...
Click to collapse
Thanks. Was wondering what rollback was. I'm used to seeing a file say revert.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

will this remove the no increasing ringtone mod or does this already incorporate that as well. Looking at the original thread by wanam there were 2 different versions available for download. Just curious. pretty sure I can figure out how to incorporate the no increasing ringtone.
Thanks.

hansonmi said:
will this remove the no increasing ringtone mod or does this already incorporate that as well. Looking at the original thread by wanam there were 2 different versions available for download. Just curious. pretty sure I can figure out how to incorporate the no increasing ringtone.
Thanks.
Click to expand...
Click to collapse
No, this does not include the "no increasing ringtone" patch. However, I could include that if you like.
Sent from my Samsung Galaxy S III

magn2o said:
No, this does not include the "no increasing ringtone" patch. However, I could include that if you like.
Sent from my Samsung Galaxy S III
Click to expand...
Click to collapse
Sure. If you don't mind. Otherwise, when i get my dev box set back up, I am pretty sure I can figure it out.
Currently working on a UCALG1 stock firmware build that has all the potential of the phone unlocked (deodexed, zipaligned, BT and WiFi tether enabled, etc.) since i have only been able to find that for the previous firmware (UCALEM). Just makes it easier instead of having to flash to stock UCALG1 and then run a bunch of updates to get back. This way flash back to rooted stock with all the bells and whistles through odin without tripping the counter. :fingers-crossed:
Once I feel like taking the risk of bricking my phone, was going to work on doing the same to UCALH1 and test it out.

i flashed the UCALG1-DEODEX-EnableCallRecording.zip through CWM stock rom but with no flash counter rooted phone yet i do not see the recording feature. is there something i'm missing? any word of advice folks?
i was able to flash the tether app and debloated app through CWM without any issue; so i'm not sure what i'm missing here. thanks in advance

cruzad3r said:
i flashed the UCALG1-DEODEX-EnableCallRecording.zip through CWM stock rom but with no flash counter rooted phone yet i do not see the recording feature. is there something i'm missing? any word of advice folks?
i was able to flash the tether app and debloated app through CWM without any issue; so i'm not sure what i'm missing here. thanks in advance
Click to expand...
Click to collapse
Is your current ROM deodexed?
Sent from my Samsung Galaxy S III

if i understand correctly, deodexed is a custom rom? if so then no i'm still on stock ATT rom just rooted.

cruzad3r said:
if i understand correctly, deodexed is a custom rom? if so then no i'm still on stock ATT rom just rooted.
Click to expand...
Click to collapse
You CAN deodex a stock ROM, but gig would have to either flash a deodexed stock ROM or deodex your apks yourself. In order to apply custom modifications or themes, you'll need a deodexed ROM.
I, personally, run a stock ROM.. stock TouchWiz, etc, justed rooted and deodexed.
Sent from my Samsung Galaxy S III

I am not deodexed. To run I simply renamed the phone apk and phone odex files in system/app folder to .old then moved the phone apk from the zip to the system/app folder using es file explorer. Rebooted .... record calls!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Be careful what state you are in when you use this. Lots of us states require two party notification to record calls (caller and called party)
Sent from my SAMSUNG-SGH-I747 using xda premium

Call Recording + No Increasing Ring
Attached is a CWM update that incorporates not only the Call Recording found in this thread, but also the mod to not have the increasing ringer which was by yoelsd. Thanks goes to both the OP and yoelsd and too many others that gave guides for decompiling and editing APKs... I also used the CWM zip that yoelsd gave with his update, as the update-script will remove the .odex file since the SecPhone_ATT.apk file is deodexed.
I just tested this out on my stock "Odexed" rooted SGS-III using the UCALG1 Firmware and it works like a charm. Best of both worlds. Maybe the OP can put a link in the first post to this. :fingers-crossed:
CHEERS!

what is this Odexed and De-Odexed business? What's the benefit and why are we doing it?

hansonmi said:
Attached is a CWM update that incorporates not only the Call Recording found in this thread, but also the mod to not have the increasing ringer which was by yoelsd. Thanks goes to both the OP and yoelsd and too many others that gave guides for decompiling and editing APKs... I also used the CWM zip that yoelsd gave with his update, as the update-script will remove the .odex file since the SecPhone_ATT.apk file is deodexed.
I just tested this out on my stock "Odexed" rooted SGS-III using the UCALG1 Firmware and it works like a charm. Best of both worlds. Maybe the OP can put a link in the first post to this. :fingers-crossed:
CHEERS!
Click to expand...
Click to collapse
Will this work with deodexed stock?
:EDIT: Yes is does!!

cruzad3r said:
what is this Odexed and De-Odexed business? What's the benefit and why are we doing it?
Click to expand...
Click to collapse
Odex means there are .odex files present for an application. Example: SecPhone_ATT.apk also has an odex file named SecPhone_ATT.odex. A deodexed application basically has the .odex file complied differently into a .dex file which resides in the .apk. the purpose of odex was for speed but you lose a bit of storage and you cannot usually mod them as easy since part of the program is in 2 places. Deodexed apps tend to use a bit more memory and are not totally optimized for speed (zipalign helps with memory and speed and for the most part differences are negligible) but are the only way you can really make any changes to roms or programs.
There are plenty of resources out there that explain "odex vs deodex" on the interweb via search engine and on this site if searched.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

ahfu25 said:
Will this work with deodexed stock?
:EDIT: Yes is does!!
Click to expand...
Click to collapse
Yup... the update that I posted is good for odexed and deodex roms since I borrowed the update-script that will delete the .odex file when you install it.
See my original post for who all I thanked for their stuff that I used. The only thing I did is take the OPs SecPhone_ATT.apk file for UCALG1 and modify it to include the no increasing ringer... there were guidss int he forums here that showed how to do it. It was easier to do that way, then to try to figure out how to enable call recording and mofiying the other APK to include it... lol
So if you used a DeOdexed rom, you will not notice anything. If you use an Odexed (i.e. stock) rom like I do, you will get a message when the phone boots that android is updating and the only file that will be deOdexed will be the SecPhone_ATT.apk file. If you are rooted, you can verify using file managers on your phone to verify that there is not a SecPhone_ATT.odex file in System/App after the update. If there is, then you can delete it (only if you actually did the update though).

Port CM10 Phone.apk to 4.2

Hey guys, since I am a noob in Android development in general, can someone please port the Phone.apk (attached) to Stock JB 4.2 with or without odex file.
I haven't tested this apk yet on 4.2 because I am paranoid. Or anyone can provide me information regarding if it would work directly (without porting).
My main idea behind porting is because of vibration (while call pickup and hang up) stuff that CM provides.
Thank you.

*BUMP*
I tried on Bigxie's Deodexed 4.2 ROM and it force closes. So can anyone please port it.

Install as a system apk and it should work just fine.
Sent from my Galaxy Nexus using xda app-developers app

It's the people app AFAIK, that package contains the dialler and contact list.

5pace said:
*BUMP*
I tried on Bigxie's Deodexed 4.2 ROM and it force closes. So can anyone please port it.
Click to expand...
Click to collapse
just pull it from the rom and push to system

Not going to work.
I read somewhere that the Phone.apk have to be signed by the signature that sign the ROM.
I'm pretty sure the way i phrase is not completely correct but i'm sure you can get the idea.

To the guys who are saying to install as a system app: I, in the first place pushed the APK using zip file but it didn't work. Mach3.2 might be correct. If you guys want to know why I want a port for it, just ask away.

5pace said:
To the guys who are saying to install as a system app: I, in the first place pushed the APK using zip file but it didn't work. Mach3.2 might be correct. If you guys want to know why I want a port for it, just ask away.
Click to expand...
Click to collapse
Make sure you set permissions.
Sent from my Galaxy Nexus using xda app-developers app

Smokeey said:
Make sure you set permissions.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I did. I am not that of a noob that I don't know stuff like this.

you can try to replace phone.apk with Galaxy SII's CM10.1 phone.apk, I'm not sure does it work and its resolution HDPI, at least apollo music player and trebuchet launcher works well on Stock JB 4.2..

manumanfred said:
you can try to replace phone.apk with Galaxy SII's CM10.1 phone.apk, I'm not sure does it work and its resolution HDPI, at least apollo music player and trebuchet launcher works well on Stock JB 4.2..
Click to expand...
Click to collapse
Link? Can't seem to find it.

5pace said:
Link? Can't seem to find it.
Click to expand...
Click to collapse
on XDA-developers go to "Portal" and the select Galaxy S II CM10.1 and download ROM or download only phone.apk: http://ge.tt/3LxoHIS/v/0

[MODS] General Mods for Stock Jellybean

Until the bootloader is unlocked. Attached is some mods to improve upon Jellybean.
Also, I urge people to bring any modifications(or test yourself) some of the mods in the Nexus 4 section that I can hopefully start transposing onto the LG Optimus Jellybean. I suggest if you're unsure if a mod will work. Ask me first, it's better to ask than brick your phone.
I'll make flashable zips and incorporate into lifeless eventually.
thermald-8064.conf
- Download file (this is NOT flashable)
- Extract the file
- Replace the extracted file with the same file in System/etc (Using Root Explorer or similiar)
- This improves the overheating issue based on the modified stock thermaconfig from ICS
Camera-Mod by _EPIC
- Same exact directions as above
- Excep replace the media_profiles with the media_profiles file attached.
More to come

Seems to be working thanks!
Sent from LG Optimus Prime G

Both work great, as always! :good:

Wifi Teather Root
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.

tomclarke24 said:
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
Click to expand...
Click to collapse
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium

Re: [READ] thread
_Epic said:
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Thanks,for the direction I have placed the same question in the [discussion] thread from your direction. Please clarify if this question can be evaluated there, if not is there a link to where this has been brought up.
Thanks Again,

_Epic said:
See the thread that says [READ]?
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
LMAO LOVE IT!!!!! So, about these mods, what exactly do they do? What should I be looking for??
Edit: The better question is HOW do they work? How do they do what they do? Im trying to learn...

Enzopreme said:
LMAO LOVE IT!!!!! So, about these mods, what exactly do they do? What should I be looking for??
Edit: The better question is HOW do they work? How do they do what they do? Im trying to learn...
Click to expand...
Click to collapse
The JB mods thread?
I didn't realize I was in this thread. The camera mod is one I made. It greatly improves camera and video. The thermal one helps with overheating.
Sent from my LG-LS970 using xda premium

tomclarke24 said:
Hello,
Hope this is the right forum, just recently updated to jelly bean LS970ZVB from this forum. Was able to retain root access; however lost my ability to use Wifi Tether for Root Users. Evidently FreeGee hasn't came up with a way to unlock the bootloader just yet after the update. Is there a way with this update to utilize free WIFI wireless tethering. I've looked around everywhere, and nothing has seemed to work. I have all green check marks on the log within the application. Please help!!!!:confused.
Maybe Sqlite will work with forcing entitlement changes; however , cant find this either.
Click to expand...
Click to collapse
Um, wifi tether works fine for me. Not sure why you need an unlocked bootloader to run wifi tether.

_Epic said:
The JB mods thread?
I didn't realize I was in this thread. The camera mod is one I made. It greatly improves camera and video. The thermal one helps with overheating.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I really liked your camera mod for ics so I wanna give this a shot. I don't know where to put the XML file though. I don't see anything names camera_profiles. Does this replace something or just get dropped in somewhere. Thanks for your work. Sorry for my lack of smarts

bowhunt2005 said:
I really liked your camera mod for ics so I wanna give this a shot. I don't know where to put the XML file though. I don't see anything names camera_profiles. Does this replace something or just get dropped in somewhere. Thanks for your work. Sorry for my lack of smarts
Click to expand...
Click to collapse
Its media_profiles and you replace that file.
Sent from my LG-LS970 using xda premium

AdriVelazquez said:
Its media_profiles and you replace that file.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Drop in system/etc folder then overwrite
Sent from my LG-LS970 using xda premium

Didn't see that in the etc folder the first time. Anyway, I replaced it now. Thanks

I can't seem to DL the thermal zip correctly. It says it dl's but when I open it there is nothing in there. The cam mod zip worked fine.
Sent from my LG-LS970 using xda premium

Adri, the bootloader is unlocked, but the boot image that freegee has is for ics and therefore won't boot. If you just flash the recovery and aboot, you are unlocked, but can't debloat since the security error is fixed with the custom boot image. We haven't figured out how to fix it on jb hence the delay.
Sent from my LG-LS970 using xda app-developers app

This one sounded interesting. Wonder if there's a similar mod that would work for us:
http://forum.xda-developers.com/showthread.php?t=2028289
It changes the synaptic driver out to increase touch screen responsiveness.
Nothing else really comes to mind though.
There's a virtual CD ROM mod I saw floating around, but I would have to find it again.
Sent from my LG-LS970 using xda app-developers app

Shelnutt has updated freegee to properly work and boot for us (the jb boot image and stuff has been taken care of). Now that is out of the way and we are unlocked/rooted zvb, could you make flashable zips for the 2 mods? would love to try them out
thanks

Always look forward to you and Epics stuff.
thanks op!

AC!D Audio Engine V7.0 NOT working on ZVB
(Update) after installing just 2805, it's working.
I have installed AC!D Audio Engine V7.0 and can confirm it is working for me.
install at your own risk.
pre-requisites:
Rooted, unlocked, custom recovery
procedure:
Read the main AC!D Audio Engine V7.0 thread here
Go to the download and installation thread here
Download the 2805 build
Place it on your /sdcard
reboot into recovery
!!!!!!!DO A NANDROID BACKUP!!!!!!!
!!!!!!!DO A NANDROID BACKUP!!!!!!!
!!!!!!!DO A NANDROID BACKUP!!!!!!!
install 2805 build
!!!!!!!CLEAR DALVIK & CACHE!!!!!!!
reboot
test with music

Awesome!
Thanks for the mods, especially the thermal mod. Appreciate the work you did on lifeless especially working with the i-crap sandwich code you and the other devs had to deal with. Looking forward to your jb roms. Keep up the good work and thanks again to you and the rest of the devs! :good:

Hotspot on 4.3 TouchWiz?

Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk

asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I flashed the hotspot mod for 4.2.2 and it works for me.

NiN39Z said:
I flashed the hotspot mod for 4.2.2 and it works for me.
Click to expand...
Click to collapse
Thank you! I'll check around for that then. Much appreciated!

On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.

Tether/hotspot only seems to work on 4.2 roms tried 4.3 and 4.4 none works or seems to have no support at least nobody answer to this kind of issue
Sent from my SGH-M919 using XDA Premium 4 mobile app

TheArtiszan said:
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Click to expand...
Click to collapse
That is good to know. I will migrate my way over there and look for that. Now all I have to do is get smart on how to modify framework.

TheArtiszan said:
On Jovys rom I posted a link with modified framework and files that will allow tethering if you are using the MK2 modems.
Click to expand...
Click to collapse
The 2 xml files , where they go? I know framework where it is, but the other 2 file dont, can you point me in the right direction thank u
Sent from my SGH-M919 using xda app-developers app

asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm using infamous v9 (4.3) and tethering works fine for me.. I'm still on the MDL baseband tho
Sent from my SGH-M919 using XDA Premium 4 mobile app

Nivle said:
The 2 xml files , where they go? I know framework where it is, but the other 2 file dont, can you point me in the right direction thank u
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
They go under /system/csc folder
You should be able to just overwrite the two that are there.
I typically delete thme out and then write the new ones and change permissions.
Reboot and it will read the new files.

Thank u, using without a problem in Jovys23 4.3 stock rom
Sent from my SGH-M919 using xda app-developers app

That's great news.
Feel free to hit the thanks button if it worked for you too.

asimons81 said:
Has anyone managed to get a hotspot workaround running for 4.3 yet?
I'm liking the ROM on now, but I really need hotspot and it doesn't seem to work on any of the posted stock 4.3 ROMs out of the box.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
KitKat carbon got it must use David instead of ART
Sent from my SGH-M919 using XDA Premium 4 mobile app

melqui2004 said:
KitKat carbon got it must use David instead of ART
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not David sorry is Dalvik
Sent from my SGH-M919 using XDA Premium 4 mobile app

where's the link to those files?
does anyone have a link to those framework files for hotspot tethering with the mk2 baseband?

Framework Files
Hello Agelistus,
the files you can find them on this thread http://forum.xda-developers.com/showthread.php?p=47983804&highlight=tether#post47983804
It will be Post #225
I didn't copy the direct URL as I don't own the link of files. Would be glad to post them here if TheArtiszan is ok with that or re-upload them to make them available in more than one spot.
agelistus said:
does anyone have a link to those framework files for hotspot tethering with the mk2 baseband?
Click to expand...
Click to collapse

Much obliged!!
Hey southsidexz, thanks a million!! xda is an entire universe of information and I would have truly burned the midnight oil looking for this to no avail. Gonna try it out now. So far that's my only issue with infamous 9, it seemed that wifi tethering worked natively on 8.0. Again, many many thanks!

Your welcome
Your welcome. Always glad to help people around.
On another note I was dumb enough to rename the framework to old before I replaced it so my Phone got killed..... However thanks to cabloomi and his Recovery Image to .tar.md5 odin flash, I was able to flash CWM latest recovery so it could read my MicroSD card and then flash the zip I created that flashed the framework file. (Thanks to ScatteredHell)
If in case someone else does it... and doesn't want to re-flash the rom or restore old backup.
You can flash Framework via recovery, following this thread instrucitons to get the framework apk into a flashable format for recovery:
http://forum.xda-developers.com/showthread.php?t=1840098
If in case you have a recovery that won't read your external SD card (like I did) you can use this link to flash any recovery via ODIN.
http://forum.xda-developers.com/showthread.php?t=2281287
(Side Note: if you get errors, please see post #23 on the link above, it provides the solution if you get errors)
Note:I am not responsible for damaging or further damaging your phone, I am just providing help/alternate solutions. Your phone is your responsibility
I follow the steps above and got back up running.
agelistus said:
Hey southsidexz, thanks a million!! xda is an entire universe of information and I would have truly burned the midnight oil looking for this to no avail. Gonna try it out now. So far that's my only issue with infamous 9, it seemed that wifi tethering worked natively on 8.0. Again, many many thanks!
Click to expand...
Click to collapse

Just to make this easy I had the same problem on replacing framework, too. Then I searched on some other forums here and found out you can copy or move the framework apk into system folder and fix permissions then move that framework I to the framework folder to replace over the existing apk and just reboot. Just make sure to make a nandroid before doing anything just incase something goes wrong.

Thanks
Thanks Carlos2200,
I would've taken that route but sadly I couldn't get into the system folder. I wasn't able to do a nandroid restore as my SD card got messed up and the backup was gone.
Definitely for anyone, make sure you have a good Nandroid before anything.
I will update that the method I mention above does remove all your accounts only. So you will have to re-add them.
Carlos2200 said:
Just to make this easy I had the same problem on replacing framework, too. Then I searched on some other forums here and found out you can copy or move the framework apk into system folder and fix permissions then move that framework I to the framework folder to replace over the existing apk and just reboot. Just make sure to make a nandroid before doing anything just incase something goes wrong.
Click to expand...
Click to collapse

An alternative....
For those who don't care to bother with the framework files in the event that 3minit is updated to work with 4.3, I came across an app on the play store called "wi-fi tether router" that seems to work, though I haven't a clue why it does. Changing the user agent on the browser renders it successful it seems. Good luck to all!

[MOD] Google Wallet NFC fix (TW 4.3, wallet 2.0+)

This nfc fix is designed for 4.3 TW roms.
For older versions, see here: http://forum.xda-developers.com/showthread.php?t=1769083
Install Instructions:
Navigate to /system/csc
Open features.xml
Look for <!-- NFC -->, and replace that section with the following:
Code:
<!-- NFC -->
<CscFeature_NFC_SetSecureEventType>GOOGLE</CscFeature_NFC_SetSecureEventType>
<CscFeature_SmartcardSvc_SetAccessControlType>NONE</CscFeature_SmartcardSvc_SetAccessControlType>
<CscFeature_NFC_DefaultCardModeConfig>ESE</CscFeature_NFC_DefaultCardModeConfig>
<CscFeature_NFC_CardModeRoutingTypeForEse>ROUTE_ON_WHEN_SCREEN_ON</CscFeature_NFC_CardModeRoutingTypeForEse>
[COLOR="Red"]<!-- If you want the NFC icon in the statusbar add this line, otherwise remove it -->[/COLOR]
<CscFeature_NFC_StatusBarIconType>Att</CscFeature_NFC_StatusBarIconType>
Download file below
Flash file in recovery
Install wallet by following the instructions here: http://forum.xda-developers.com/showthread.php?t=2457569
Notes:
If you installed any other nfc fix, you'll need to revert back to your rom's "stock" system. Just flash your rom again.
This will work on either odexed or deodexed roms, as it will remove any associated .odex files.
Devs:
This is a modified Nfc.apk taken from a Sprint build.
Here's a rundown of what's happening:
NfcService looks at /system/etc/nfcee_access.xml and checks for the Google wallet signature.
It also looks at /system/etc/security_nfc_profile.dat for certain files and their sha-1. If it can't match the file with it's sha-1 it marks the system as tampered and will not allow access to the secure element.
This modified Nfc.apk will always return true when it looks at security_nfc_profile.dat.
To-do:
Create a script that will modify features.xml during install.
Download:
SGS3_4.3_TW_nfc_fix.zip

Report: I just installed wallet according to the new post of yours and it all went well. I'm on MBJ bootloader and also on yours att deodexed 4.3 Rom. Here's the screenshot:
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Thanks works great and no pop ups.
Sent from my SGH-T999 using Tapatalk

Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
cybok0 said:
Thanks works great and no pop ups.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse

jeremyds45 said:
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
Click to expand...
Click to collapse
I dont think you would have any problems.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

jeremyds45 said:
Stupid noob question, will this work on ota 4.3 that is rooted and has custom recovery? Been wanting wallet tap to pay to work for a while now, Thanks a lot, I searched but could not come up with anything
Click to expand...
Click to collapse
Yes, it will work fine
Sent from my SAMSUNG-SGH-I747

Thanks a lot for this, got it working good. Had to mess with it some, had some previous wallet files that needed to be removed and the like, thanks, I've always wanted to use tap to pay but never wanted to screw with the secure element
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Works great! Been trying everything in the Wallet thread for weeks and never got it working until now!
Sent from my SGH-T999 using XDA Premium 4 mobile app

Also, after I made the changes to the feature.XML file, I made a copy to my sdcard so I can just paste it should I have to reflash my ROM. Might not work if I upgrade or change my ROM, but if I bork and have to reflash it.
Sent from my SGH-T999 using XDA Premium 4 mobile app

does this fix work on att note 2?= running international touchwiz 4.3?

DeathEvil said:
does this fix work on att note 2?= running international touchwiz 4.3?
Click to expand...
Click to collapse
This is the s3 forums, I have a working zip for the note2, but androidfilehost is down right now. So here it is. I'll probably be making some threads soon.

I can finally upgrade to 4.3, just needed a working Wallet. Thanks so much for figuring this out!:laugh:
EDIT: Finally flashed to 4.3. This is what I did. I forgot to disable Wallet, so I did so through the website, wallet.com. After flashing I edited the xml file, then I booted into recovery and flashed the nfc fix. Then I downloaded and pushed the new .apk. When I booted up, the wallet icon did not appear in the notification bar. And after setting up, I have tap and pay not available. What went wrong?
T-Mobile SGS3, Stock rooted T-Mob 4.3, nfc fix from your thread and modded 2.0-R141-V14 .apk
EDIT: I just noticed that auto-upate is on by default in the playstore. I didn't notice any update, but I wonder if that's what did it. Never mind, somehow I got the wrong .apk.
EDIT: Turns out it was the old MD5 modem. I was on wifi the whole time after flashing and didn't notice I did not have a cell signal. Wallet tap and pay is setting up! Thanks!!!

Thank you very much for the work that went into this NFC fix and for the work that has gone into the modified Wallet.apk. I had forgotten to reboot after pushing the app to system/app and the tap to pay feature kept failing. As soon as I rebooted and tried again, it worked. The real test will come when I can actually make it to a store to test. Thanks again.

After I pushed the right .apk and flashed the right modem to get a cell signal, everything set up fine. Used it tonight and had to explain to someone who was so impressed he wants to buy a Nexus or a Sprint GS3.

loserskater said:
This is the s3 forums, I have a working zip for the note2, but androidfilehost is down right now. So here it is. I'll probably be making some threads soon.
Click to expand...
Click to collapse
This worked for my TW 4.3 Note 2

Thanks so much for this thread. I'm happy it give the technical nitty gritty details as well as instructions. Tap to pay is now working on my T999 running rooted stock 4.3.

will this work for a vzw sgs3 with isis as well? i have isis and wallet on my vzw s3 and both are working right now. but not when i upgrade to 4.3 so i've temporarily reverted back to 4.1.2

Does this has to be done on s4 running 4.3 rom?
Sent from my SCH-I545 using Tapatalk

Does this work on 1747m (bell) ? I'd love to be able to use wallet.

cnlson said:
will this work for a vzw sgs3 with isis as well? i have isis and wallet on my vzw s3 and both are working right now. but not when i upgrade to 4.3 so i've temporarily reverted back to 4.1.2
Click to expand...
Click to collapse
It should work, although I haven't tested or heard of anybody that has. If it works for you please let me know.
dseda86 said:
Does this has to be done on s4 running 4.3 rom?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No, this is in the S3 forums for a reason.
longjohnsteve said:
Does this work on 1747m (bell) ? I'd love to be able to use wallet.
Click to expand...
Click to collapse
Yes, it should work fine.
Sent from my SAMSUNG-SGH-I747