I recently just wipe did a factory reset on a encrypted (factory encryption) Galaxy S3, after rebooting it i have found that i am unable to get past the initial password prompt screen. I have tried to flash stock ROM, multiple times, to no avail as after each reboot i get the same password prompt screen. i have tried to flash custom ROM, multiple times, this to to no avail as it will not even go onto the device through push in Samsung toolkit v7 or slideloader. i have wiped the ROM to the point of nothing being on the phone and re-installed the factory ROM again this to with not avail as it still has the password screen. Now before i go back to t-mobile and see if they will help me, i decided to get community input to see if there is anything that can be done outside of the Factory as i have void warranty using Samsung Galaxy S3 Toolkit v7.
******UPDATE******* for those with similar problem, i just fixed this. Issue is as follows with possible fix action:
Issue was that encrypting the Samsung Galaxy S3 with the factory encryption and then wiping the system will cause the password file to be deleted but the encryption to stay on the phone. My fix action was that download original ROM from the provider, delete existing ROM on phone till it is basically a brick with USB debugging on and re install the original providers ROM. After it is re install you have to go in and wipe the phone's data one more time. This resulted in the password prompt screen disappearing and the basic start setup being initiated as if you just bought the phone from the store. Although this is my fix and other fixes for future reference would be much appreciated to. *********UPDATE************
zidale said:
I recently just wipe did a factory reset on a encrypted (factory encryption) Galaxy S3, after rebooting it i have found that i am unable to get past the initial password prompt screen. I have tried to flash stock ROM, multiple times, to no avail as after each reboot i get the same password prompt screen. i have tried to flash custom ROM, multiple times, this to to no avail as it will not even go onto the device through push in Samsung toolkit v7 or slideloader. i have wiped the ROM to the point of nothing being on the phone and re-installed the factory ROM again this to with not avail as it still has the password screen. Now before i go back to t-mobile and see if they will help me, i decided to get community input to see if there is anything that can be done outside of the Factory as i have void warranty using Samsung Galaxy S3 Toolkit v7.
******UPDATE******* for those with similar problem, i just fixed this. Issue is as follows with possible fix action:
Issue was that encrypting the Samsung Galaxy S3 with the factory encryption and then wiping the system will cause the password file to be deleted but the encryption to stay on the phone. My fix action was that download original ROM from the provider, delete existing ROM on phone till it is basically a brick with USB debugging on and re install the original providers ROM. After it is re install you have to go in and wipe the phone's data one more time. This resulted in the password prompt screen disappearing and the basic start setup being initiated as if you just bought the phone from the store. Although this is my fix and other fixes for future reference would be much appreciated to. *********UPDATE************
Click to expand...
Click to collapse
When you say you reinstalled the original provider's ROM, I'm not sure if you mean you used ODIN. I believe ODIN install is the only way to recover from this as it reformats the partitions.
An ODIN flash back to OTA did not help my issue.
My company now requires the encrypt device policy for exchange, so I went ahead encrypted the device while running CM10. The encryption succeeded, but every time the screen timed out, it would turn off the device instead of just turn off the screen (CM10 bug?) - didn't want to have to deal with having to cold boot the device every time I want to do something, not to mention the phone being off :/
So I did a nandroid restore to my last known state and now I get prompted for the unencrypt password. However, the password doesn't work. Probably because the password file was deleted, but the system and data partitions are still encrypted.
I've tried doing a full wipe in TWRP and flashing multiple ROMs. I've also tried ODIN flashing root66 and OTA JB 4.1.1 with no success. It still asks for the unencrypt password. I suspect the only way to fix this is to completely re-create the system and data partitions.
If anyone knows how to accomplish this, I'd be grateful because I have a soft brick right now (i.e. can't get past unencrypt password prompt with any ROM)
OMG THANK YOU SO MUCH FOR THIS. I was in the same exact situation you were in and thank god for this thread. I thought my phone was pretty much done for.
fix
BTT8 said:
OMG THANK YOU SO MUCH FOR THIS. I was in the same exact situation you were in and thank god for this thread. I thought my phone was pretty much done for.
Click to expand...
Click to collapse
flash ur rom. then flash CF-Auto-Root, boot to recovery, factory restore, done
Hi all,
I recently got a HK N7105 and because it lacked the possibility to use a french keyboard I upgraded to a stock unbranded ROM from Sweden (XXDLL1) and succesfully rooted with the relevant CF_autoroot through Odin. Also installed TWRP 2.3.3.1.
Then, I connected the Note 2 to my corporate exchange server which enforced a full encryption policy (device and external SD card) so I had to type in a password at each boot time (with a "nice" swedish prompt that took ma while to decypher), plus a password to unlock the screen. All was well as the root survived the process.
Next I upgraded to a later stock ROM from France (XXDLL4 from SFR) to try and get rid of the swedish prompt. That worked fine (and root was loast in the process, as expected) but I hated the branded stuff so much I reverted to XXDLL1 until a proper unbranded "english" or "french" ROM is available.
At this point I decided to root again. I was running XXDLL1 like the first time and used the same autoroot tar from Chainfire. Except my Note 2 was still encrypted and after that it would not accept my boot password (a four digit PIN) anymore so I was guted and had to factory reset and root then reinstall everything before reconnecting to the exchange server.
Question 1: Does anyone know of a safe, proven way to root a fully encrypted Samsung device so I can go another upgrade without having to wipe the device first?
Why reinstall everything? Why not backup everything first so you can restore after the wipe? Well, it so happens that no recovery (at least neither CWM or TWRP) can read any encrypted media on the Note 2 at the moment. And no Recovery can actually fully backup the device as well.
Question 2: Does anyone know of a proper way to handle this situation with minimum hassle?
So far, the best I can think of is doing a Titanium backup and FTP the files to my NAS so I can retrieve them later. But (Question 3) will this be enough to restore my phone to the expected state after a stock firmware upgrade?
Thanks in advance,
François
frankieGom said:
Hi all,
I recently got a HK N7105 and because it lacked the possibility to use a french keyboard I upgraded to a stock unbranded ROM from Sweden (XXDLL1) and succesfully rooted with the relevant CF_autoroot through Odin. Also installed TWRP 2.3.3.1.
Then, I connected the Note 2 to my corporate exchange server which enforced a full encryption policy (device and external SD card) so I had to type in a password at each boot time (with a "nice" swedish prompt that took ma while to decypher), plus a password to unlock the screen. All was well as the root survived the process.
Next I upgraded to a later stock ROM from France (XXDLL4 from SFR) to try and get rid of the swedish prompt. That worked fine (and root was loast in the process, as expected) but I hated the branded stuff so much I reverted to XXDLL1 until a proper unbranded "english" or "french" ROM is available.
At this point I decided to root again. I was running XXDLL1 like the first time and used the same autoroot tar from Chainfire. Except my Note 2 was still encrypted and after that it would not accept my boot password (a four digit PIN) anymore so I was guted and had to factory reset and root then reinstall everything before reconnecting to the exchange server.
Question 1: Does anyone know of a safe, proven way to root a fully encrypted Samsung device so I can go another upgrade without having to wipe the device first?
Why reinstall everything? Why not backup everything first so you can restore after the wipe? Well, it so happens that no recovery (at least neither CWM or TWRP) can read any encrypted media on the Note 2 at the moment. And no Recovery can actually fully backup the device as well.
Question 2: Does anyone know of a proper way to handle this situation with minimum hassle?
So far, the best I can think of is doing a Titanium backup and FTP the files to my NAS so I can retrieve them later. But (Question 3) will this be enough to restore my phone to the expected state after a stock firmware upgrade?
Thanks in advance,
François
Click to expand...
Click to collapse
I think using Exynos Abuse apk will do the work
http://forum.xda-developers.com/showthread.php?t=2050297
Thanks for the heads up, I'll look into it. But to be clear, that answers question 1, correct?
Sent from my GT-N7105 using xda app-developers app
frankieGom said:
Thanks for the heads up, I'll look into it. But to be clear, that answers question 1, correct?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Yes that's a way to root the device.
Regarding encryption, very few people on xda seem to use it. So for that reason you'll have trouble finding out what works... I do use it though through choice so I can help you a bit.
When you encrypt the device, just consider /data to be off limits to anything not booted fully. That's why it asks you for your key in swedish - it can't see what language is in use until you unlock /data.
You will have issues using recovery with the device, since they can't read /data. You can use an external sd to perhaps load data to the device though.
I believe that TWRP might soon support the Samsung encryption on the device, meaning you could use it as recovery. Once you have a recovery that supports Samsung encryption, you should be able to consider it a fairly normal device.
Just be more cautious to backup your data as it is hard to recover if something goes wrong...
If your using stock rom 4.1.2, exynos abuse method of root will not work. It's been patched
Sent from my GT-N7100 using xda app-developers app
pulser_g2 said:
Yes that's a way to root the device.
Regarding encryption, very few people on xda seem to use it. So for that reason you'll have trouble finding out what works... I do use it though through choice so I can help you a bit.
When you encrypt the device, just consider /data to be off limits to anything not booted fully. That's why it asks you for your key in swedish - it can't see what language is in use until you unlock /data.
You will have issues using recovery with the device, since they can't read /data. You can use an external sd to perhaps load data to the device though.
I believe that TWRP might soon support the Samsung encryption on the device, meaning you could use it as recovery. Once you have a recovery that supports Samsung encryption, you should be able to consider it a fairly normal device.
Just be more cautious to backup your data as it is hard to recover if something goes wrong...
Click to expand...
Click to collapse
Fine, I understand. As long as I have a way to recover my data if I need to wipe I'm okay... I just have to hope Titanium backup gives me that until TWRP can manage encruption on the Note 2.
I'm really waiting for a stock rom that boots in English or French now.
Sent from my GT-N7105 using xda app-developers app
vash_h said:
If your using stock rom 4.1.2, exynos abuse method of root will not work. It's been patched
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Not the case with xxdll1. When was it patched, xxdll4 or xxdll7?
Sent from my GT-N7105 using xda app-developers app
frankieGom said:
Not the case with xxdll1. When was it patched, xxdll4 or xxdll7?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
I am on Stock 4.1.2 and Exynos Abuse did work on my device, it's successfully rooted using the Exynos AbuseAPK on 4.1.2 :good:
OK, now I have been experimenting a bit with backups and upgrade and have trouble restoring my device fully. Let me explain...
I got hold of a TWRP build that seems to handle Samsung encryption fine through one of the TWRP devs (thanks!), so I decided to go back and try to update my device.
Current ROM: N7105XXDLL1_N7105TLADLL1_N7105XXDLK7_HOME.tar (obtained from Samsung Updates)
New ROM: N7105XXDLL7_N7105OLBDLL2_N7105DXDLL1_HOME.tar (obtained from Samsung Updates)
First I performed a complete Titanium Backup on the device and pulled the files to my laptop using ADB.
Then I restarted into TWRP 2.4.0.0 (got a prompt for my password), performed a full backup and pulled the files to the laptop using ADB.
(for some reason, I could not install the new ROM from TWRP (unable to open ZIP), but the ZIP looked OK, as well as after a second download which TWRP since did not like, so I had to use Odin instead).
Next, I flashed DLL7 with Odin. It worked, asked for the password at boot, but the device was unrooted at this point (I expected that).
Then, I flashed CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar from Odin, but the boot up password would not be accepted anymore as I already knew.
Tried to flash DLL7 again from Odin, same thing
Flashed TWRP back on recovery partition, but on startup it would not ask for password anymore and the external sdcard looked empty to it.
I then copied my backup to a different, non encrypted sdcard and could restore from TWRP but the password would still not work after reboot.
I did a factory reset, restored backup, same result.
At this point I decided to factory reset, wipe Dalvik and format /data. The format did the trick and after TWRP restore of my original back up the device booted up, did not ask for password and all my data was there. Except the Exchange account I use for Corporate email wants me to restore encryption in order to work (I expected that too).
Back at DLL1, so I flashed DLL7 again with Odin (OK), rooted the phone, triangled away the flash counter and reflashed TWRP to recovery.
I was where I wanted to be except for one thing: I need to restore Corporate access. But when I let it encryp the phone it does nothing. I let it through the night and nothing). And if I reboot the phone no password is needed at boot time, yet the phone seems to behave as if it thought the device was still encrypted...
I reflashed my original, full, backup (i.e DLL1) succesfully but Exchange still wants to encrypt my device. Isn't restore supposed to restore the encrypted /data I backed up?
At this point I'm left with possibly tryinjg to go back to full factory settings, not use the backup at all, encrypt the device then restore my data from the Titanium backup I made.
Is there a better option?
[edited jan 18 - TWRP/TB behaviour]
My comments apply to encrypted devices only! I am not trying to talk down TWRP or TB here, as they provide splendid performance on non encrypted devices. I have come upon hard time trying to upgrade/restore an encrypted device using thoise tools, that's all
For those considering upgrading & re-rooting encrypted devices, don't!
I am finding the hard way that this is a one way street. At this point, my TWRP made full backup does not restore the device to the expected status. Each time I apply it, subsequent bootup takes several minutes and I end up going through the initial setup procedure. It seems the device for some reasoin goes through a complete reset procedure.
[edit]
Clarification: The TWRP build I use, 2.4.0.0 is an alpha build and I was not current when I restored my backup. I so happens that it was overwriting the encryption header on the partition, which messed things up bad, and had issues writing back the data partition, ending up in a factory reset status!
Using the latest drop as of today (jan 27) I was able to restore my original backup and am now back to my original state. All is well.
[/edit]
Titanium Backup is none better. It keeps telling me that my Android ID has changed, a host of system applications start to fail when I try to restore and generally speaking I have now spent between a good 20 hours trying to simply restore my data.
[edit]
this behaviour is probably linked to encryption. I know for a fact that TB works very well on non encrypted phones. The 20h figure is overall, not just with TB.
[/edit]
The end story is: root before you encrypt, and either don't upgrade or don't re-root if you do! If you do, be prepared for some rough times...
Unless someone has a cleat idea of how to do this properly without losing all your data, that is.
François
frankieGom said:
For those considering upgrading & re-rooting encrypted devices, don't!
I am finding the hard way that this is a one way street. At this point, my TWRP made full backup does not restore the device to the expected status. Each time I apply it, subsequent bootup takes several minutes and I end up going through the initial setup procedure. It seems the device for some reasoin goes through a complete reset procedure.
Titanium Backup is none better. It keeps telling me that my Android ID has changed, a host of system applications start to fail when I try to restore and generally speaking I have now spent between a good 20 hours trying to simply restore my data.
The end story is: root before you encrypt, and either don't upgrade or don't re-root if you do!
Unless someone has a cleat idea of how to do this properly without losing all your data, that is.
François
Click to expand...
Click to collapse
I have had no issues despite doing upgrades, with and without wipes.
Titanium is fine, just stop restoring system app data. Seriously, what data do you have in a system app that you want to restore.
Restore your user apps, their data, and the xml based call, sms, Wifi backups. It will work fine.
Device ID isn't a problem - it's just trying to help you.
pulser_g2 said:
I have had no issues despite doing upgrades, with and without wipes.
Titanium is fine, just stop restoring system app data. Seriously, what data do you have in a system app that you want to restore.
Restore your user apps, their data, and the xml based call, sms, Wifi backups. It will work fine.
Device ID isn't a problem - it's just trying to help you.
Click to expand...
Click to collapse
Sorry if I came across dissing Titanium Backup and/or TWRP. This was not the intent... I am sure both tools work real nice in general cases (and I have had success restoring data on a Jetstream before).
My main issue here is _full device encryption_ enforced by my company's corporate IT to allow me on the corporate exchange server. Do you have full device encryption on?
On my device, even after a full wipe and flashing a fresh stock rom Titanium Backup just did not work as I hoped. When I had to confirm individual popups of apps closing unexpectedly while it was proceeding and got nothing back in the end, what was I supposed to think? It could be that I don't understand how TB works... I was neither able to restore missing apps after the flash (missing apps: 0) nor installed apps data (they would close unexpectedly when started after restoring the back up). So I say: until full operation of TB on encrypted devices is documented, I will stay away from it, even though I am a registered user (and I do not plan to seek reimbursment)!
Anyway, I got to a belated happy ending (previous post edited).
frankieGom said:
Sorry if I came across dissing Titanium Backup and/or TWRP. This was not the intent... I am sure both tools work real nice in general cases (and I have had success restoring data on a Jetstream before).
My main issue here is _full device encryption_ enforced by my company's corporate IT to allow me on the corporate exchange server. Do you have full device encryption on?
On my device, even after a full wipe and flashing a fresh stock rom Titanium Backup just did not work as I hoped. When I had to confirm individual popups of apps closing unexpectedly while it was proceeding and got nothing back in the end, what was I supposed to think? It could be that I don't understand how TB works... I was neither able to restore missing apps after the flash (missing apps: 0) nor installed apps data (they would close unexpectedly when started after restoring the back up). So I say: until full operation of TB on encrypted devices is documented, I will stay away from it, even though I am a registered user (and I do not plan to seek reimbursment)!
Anyway, I got to a belated happy ending (previous post edited).
Click to expand...
Click to collapse
Yup I use device encryption Enabled manually, but it's the same encryption.
You should find that titanium shouldn't even be aware of it - the encryption is transparent!
I wonder... I'm sure lenny had that issue on a recent 4.1.2 "stock" ROM... And he doesn't use encryption...
I personally have had no issues with titanium on an encrypted device anyway
I notice you were using the newest rom - that's the one lenny had issues on.
pulser_g2 said:
Yup I use device encryption Enabled manually, but it's the same encryption.
You should find that titanium shouldn't even be aware of it - the encryption is transparent!
I wonder... I'm sure lenny had that issue on a recent 4.1.2 "stock" ROM... And he doesn't use encryption...
I personally have had no issues with titanium on an encrypted device anyway
I notice you were using the newest rom - that's the one lenny had issues on.
Click to expand...
Click to collapse
Exactly like I thought, encryption should be transparent to Titanium Backup since it runs within the OS.
I have had problems restoring into 4.1.2 DLL1 (the build I came from) and DLL7 (the one I was trying to go to)
The point is moot anyway since the DLL7 I tried was actually branded (Singtel stuff all around the launcher) and did not include French, which is why restoring my TWRP backup was a tempting proposition.
Good to know TB runs fine with encryption as well. What ROM are you running?
François
frankieGom said:
Hi all,
I recently got a HK N7105 and because it lacked the possibility to use a french keyboard I upgraded to a stock unbranded ROM from Sweden (XXDLL1) and succesfully rooted with the relevant CF_autoroot through Odin. Also installed TWRP 2.3.3.1.
Then, I connected the Note 2 to my corporate exchange server which enforced a full encryption policy (device and external SD card) so I had to type in a password at each boot time (with a "nice" swedish prompt that took ma while to decypher), plus a password to unlock the screen. All was well as the root survived the process.
Next I upgraded to a later stock ROM from France (XXDLL4 from SFR) to try and get rid of the swedish prompt. That worked fine (and root was loast in the process, as expected) but I hated the branded stuff so much I reverted to XXDLL1 until a proper unbranded "english" or "french" ROM is available.
At this point I decided to root again. I was running XXDLL1 like the first time and used the same autoroot tar from Chainfire. Except my Note 2 was still encrypted and after that it would not accept my boot password (a four digit PIN) anymore so I was guted and had to factory reset and root then reinstall everything before reconnecting to the exchange server.
Question 1: Does anyone know of a safe, proven way to root a fully encrypted Samsung device so I can go another upgrade without having to wipe the device first?
Why reinstall everything? Why not backup everything first so you can restore after the wipe? Well, it so happens that no recovery (at least neither CWM or TWRP) can read any encrypted media on the Note 2 at the moment. And no Recovery can actually fully backup the device as well.
Question 2: Does anyone know of a proper way to handle this situation with minimum hassle?
So far, the best I can think of is doing a Titanium backup and FTP the files to my NAS so I can retrieve them later. But (Question 3) will this be enough to restore my phone to the expected state after a stock firmware upgrade?
Thanks in advance,
François
Click to expand...
Click to collapse
About a backup : have you tried Online Nandroid (Playstore) (or similar, based on Onandroid) ? This makes a CWM or TWRP compatible backup while the device is running (everything should be unencrypted at this moment).
See http://forum.xda-developers.com/showthread.php?t=1620255
About rooting : you can try the same trick as above, by using ADB-shell and pushing the needed files to root to the device while it is running.
For my S3 there is a Toolkit that automates all this (http://forum.xda-developers.com/showthread.php?t=1703488), maybe there is something similar for your device ?
If not, you should still be able to do it using manual ADB-pushing.
I'm sorry I can't give you detailed instructions about the rooting as I'm not familiar with your device. Search here on XDA and you'll find more details.
pat357 said:
About a backup : have you tried Online Nandroid (Playstore) (or similar, based on Onandroid) ? This makes a CWM or TWRP compatible backup while the device is running (everything should be unencrypted at this moment).
See http://forum.xda-developers.com/showthread.php?t=1620255
About rooting : you can try the same trick as above, by using ADB-shell and pushing the needed files to root to the device while it is running.
For my S3 there is a Toolkit that automates all this (http://forum.xda-developers.com/showthread.php?t=1703488), maybe there is something similar for your device ?
If not, you should still be able to do it using manual ADB-pushing.
I'm sorry I can't give you detailed instructions about the rooting as I'm not familiar with your device. Search here on XDA and you'll find more details.
Click to expand...
Click to collapse
Thanks for the suggestions, and no I had not tried Online Nandroid as I was not aware of it. Anyway, my main issue is now resolved since TWRP has include support for Samsung TouchWiz based encryption in 2.4 and that works well.
For those interested, the only remaining issues I have with TWRP regarding encryption are that if you want to format /data from TWRP (say, to remove encryption) it will fail unless you _do not_ enter the password at boot, and the TWRP formated /data cannot be re-encrypted (you must use stock recovery to factory reset/wipe the device or else the encryption step will sit deat in the water doing nothing). I suppose the second one is a bug that will be fixed in a later version.
I will check Online Nandroid out anyway, being able to make a backup from a live system sounds good!
François
frankieGom said:
Thanks for the suggestions, and no I had not tried Online Nandroid as I was not aware of it. Anyway, my main issue is now resolved since TWRP has include support for Samsung TouchWiz based encryption in 2.4 and that works well.
For those interested, the only remaining issues I have with TWRP regarding encryption are that if you want to format /data from TWRP (say, to remove encryption) it will fail unless you _do not_ enter the password at boot, and the TWRP formated /data cannot be re-encrypted (you must use stock recovery to factory reset/wipe the device or else the encryption step will sit deat in the water doing nothing). I suppose the second one is a bug that will be fixed in a later version.
I will check Online Nandroid out anyway, being able to make a backup from a live system sounds good!
François
Click to expand...
Click to collapse
I have a similar issue. I had the device encrypted and decided to ROOT (using CF-AutoRoot). Unfortunately I cannot bypass the password screen now, although I know that I'm entering the right password. You are saying that if I flash TWRP everything will be fine?
ludovicianul said:
I have a similar issue. I had the device encrypted and decided to ROOT (using CF-AutoRoot). Unfortunately I cannot bypass the password screen now, although I know that I'm entering the right password. You are saying that if I flash TWRP everything will be fine?
Click to expand...
Click to collapse
Two separate things:
Root messing up encrypted touchwiz devices and twrp not handling touchwiz encrypted partitions properly.
The 2nd one, as much as I can tell, is fixed since before 2.5 so if youwork with the latest (2.6) you should be fine.
The first one I haven't played with in a while, but my finding is that you don't want to root a device once it's been encrypted. I've tried several different methods including rooting as you flag as is possible with twrp and all end up the same:the password is not recognised anymore!
The only thing that works for me is rooting before encrypting or only flashing pre-rooted ROMs.
frankieGom said:
Two separate things:
Root messing up encrypted touchwiz devices and twrp not handling touchwiz encrypted partitions properly.
The 2nd one, as much as I can tell, is fixed since before 2.5 so if youwork with the latest (2.6) you should be fine.
The first one I haven't played with in a while, but my finding is that you don't want to root a device once it's been encrypted. I've tried several different methods including rooting as you flag as is possible with twrp and all end up the same:the password is not recognised anymore!
The only thing that works for me is rooting before encrypting or only flashing pre-rooted ROMs.
Click to expand...
Click to collapse
Yes - I had to factory reset the phone and format the SD Card. Never root AFTER encryption :silly:
Hey guys.Im kinda a noob, so bear with me. I have a SGH i747 (att galaxy s3) and I rooted it on my mac using motochopper. I backed up all my apps and system data with titianium backup to my SD card, and i also backed up my stock ROM to my internal storage using ROM Manager. I then downloaded liquid smooth using my phones browser, and then I selected it within ROM manager and clicked "reboot and install' (keep in mind, i didn't wipe memory or anything) So it was stuck at the boot screen. Then i realized what i did and went and wiped data/factory reset, dalvic cache, and the other cache, within Clockworld mod recovery (vol up + power + home). After that, it worked, but only to find that all my apps were gone, and the play store and browser app didnt work. so basically softbricked however I can make phone calls and text (lost all contacts). Then i went into cwm and tried to restore my phone, at first it came up with two backups (neither of which had the name I named my backup) but said no files found and then when I mounted my storage, the bottom one said md5 mismatch but the top one worked. the top one would work for about 6 min then while it was restoring data it would reboot into liquid smooth and i would have like 3 apps i didnt have before (other times i would get stuck at the boot screen). I also tried restoring it right after I wiped data/ factory reset and cleared the caches, but then it would get stuck at the liquidsmooth boot screen. Tried pretty much everything.
I just want my phone back the way it was before root or anything, with all my data. But I backed up all my stuff besides apps to KIES, so willing to reset it to stock firmware if possible
need all the help i can get. thank you all very much
SuaveNNR said:
words...
Click to expand...
Click to collapse
Well, when you did a factory reset, that wiped out all your apps, contacts, personal data, etc. No big deal. Your phone is in good shape, not bricked in any way, you just don't have all your personal stuff.
The only way to get it back to stock is to flash a stock firmware via ODIN or mobile ODIN, tutorials for doing both can be found here. I'm not 100% on how to do it (ODIN) with a mac other than either booting windows if you have the capability on your computer or running windows in a virtual box and using odin that way.
Or...if you have an SD card you could stick it in your computer, download another rom or liquid smooth again and reflash the proper way in recovery to get it to work. It sounds like you neglected to flash the separate GAPPS file that is required for the AOSP ROMS.
All is good. Your phone is not in bad shape. Take a breath, do some research before you flash anything else. Don't compound the problem by flashing random things that you think might help.
worked. I owe you much gratitude
FIESTY2 said:
Well, when you did a factory reset, that wiped out all your apps, contacts, personal data, etc. No big deal. Your phone is in good shape, not bricked in any way, you just don't have all your personal stuff.
The only way to get it back to stock is to flash a stock firmware via ODIN or mobile ODIN, tutorials for doing both can be found here. I'm not 100% on how to do it (ODIN) with a mac other than either booting windows if you have the capability on your computer or running windows in a virtual box and using odin that way.
Or...if you have an SD card you could stick it in your computer, download another rom or liquid smooth again and reflash the proper way in recovery to get it to work. It sounds like you neglected to flash the separate GAPPS file that is required for the AOSP ROMS.
All is good. Your phone is not in bad shape. Take a breath, do some research before you flash anything else. Don't compound the problem by flashing random things that you think might help.
Click to expand...
Click to collapse
I went to friends PC and ran odin. worked perfectly. no problem losing all my data as long as i have a phone that works. thank you
Disclaimer: I am not responsible for any damage or liability arising out of these steps. I did not invent anything, I just tried something. Only move forward at your risk
If you don't agree ... stop reading and move on...
Background: Our phone has access to so much personal information that its scary if it fell into wrong hands. The only way to fix this is to encrypt phone. I did lot of research and here is a working solution that works for me - try at your risk.
Download Links:
a) Tested with ROM Stock 4.4.4 NH7 Galaxy S4 M919/Jfltetmo by @ShinySide
b) Tested with ROM |ROM|★KANGAKAT★|►KTU84P◄|4.4.4|Xposed|►8◄|6.26.14 by @iB4STiD
c) stock recovery AT&T S4 works with M919
d) Philz/CWM custom recovery
Encrypting with custom rom
1) Assume you are on custom recovery. - Backup everything first. Create a nandroid backup
2) Do a full wipe and install one of the two roms linked above (I have tested with few other roms ... none worked). Start the phone and set it up the way you want. Install all apps etc.
3) ODIN Stock recovery. See #c under download above. Its AT&T stock recovery but works for me. You need to know how to ODIN - find out. Doing this wrong will permanently damage your phone
4) Start your phone and turn on encryption. You will need to set lock type = password and will need to connect to charger and have 80% charge.
- Phone will do blank and stay blank for 20-30 minutes. Do not do anything. Encryption is happening behind the scenes.
- You might have to do this twice or thrice if it did not encrypt first time. For me the phone went blank first time and after 25 minutes it restarted but device was not encrypted. I redid the same steps and worked second time.
- If you interrupt the encryption process (battery pull or power up) you will see error message (encryption failed, reset device)
5) If all goes well you now have a password protected encrypted phone with custom rom!!! Check in Settings -> Security
6) You may install custom recovery ... but I don't see the point because you will need stock recovery to decrypt
To install another ROM
1) Reboot into stock recovery, then wipe data and cache (this removes encryption).
2) install your recovery of choice and install ROM using recovery. Philz/CWM
Credit goes to @Tronicus and his reply Flash a Rom on an Encrypted Android
Tronicus said:
How to Flash a rom on an encrypted Android phone (specifically this one, the I9505 SGH-I337).
The Problem: Once encrypted, you can't decrypt it easily. When encrypting the phone android will tell you you can only decrypt it using a factory reset. Naturally you assume it's talking about the "Factory Data Reset" option found in Settings --> Backup and Reset. But noooo, Android is lying through its ****ing teeth. Then you'll assume you have to wipe everything from your custom recovery mod (CWM, TWRP, or one of those). Wrong again! You'll get beautiful "can't mount /data" messages and more bull****. I read about a workaround that required installing the new rom using ADB, but I had ingeniously disabled USB debugging prior to wiping everything, so I only got so far with that option (plus it's tediously long if you haven't installed all the necessary software already and don't feel like bricking your phone because you made a typo in the command line). So, apparently the only other way to really format that partition free of its encryption is to use a stock recovery. So:
Short Version for Godlike users who know automatically how to do all this **** without any help (mimicking how most help posts are finely detailed on this site): Flash stock recovery, wipe everything, flash your custom recovery and install your new rom.
Long version for us mortals who don't know everything and haven't already downloaded already every single bit of software on earth:
Backup all the stuff you want to save. This process will truly wipe EVERYTHING. You can do it manually, or you can use an app like Titanium Backup Pro to help you (find it on Google Play Store). Here's a nice guide which recommends what to restore and what not to restore: http://forum.xda-developers.com/showthread.php?t=1480343
Flash the stock recovery using Odin. You can download a stock recovery from here: http://forum.xda-developers.com/showpost.php?p=49687791&postcount=3 It's the link called "I337MK2stockrecovery.tar.md5" In case you don't know how to flash it with Odin, this short guide will help: http://forum.xda-developers.com/showthread.php?t=1506697
In step 6 replace "recovery.tar.md5" with the stock recovery you downloaded.
Wipe everything from the Stock recovery console. This little ****er will **** up the encryption all those sissies couldn't touch. You're welcome. You boot into recovery mode from a turned off phone by pressing simultaneously the volume up key + the home key + the power key until you see blue text appearing in the top left corner of your screen.
Reinstall your custom recovery. In my case I had installed the rom BEFORE flashing in the stock recovery (apparently it works, you just can't boot because of the encryption), so I was able to boot into the new rom before I returned to my custom recovery. Weird. Anyways, I recommend CWM. You can pick it up from this link: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte
For some weird reason they call the I337 version the "jflte" version. It's bonkers. Click there, and download the latest version that ends with .tar.md5. This version is upgradable via Odin, which we already used. Use the same instructions used as when you upgraded the stock recovery rom.
Boot into your recovery mod and flash your rom like you usually do.
A word about TWRP: it cost me many hours of work and I don't recommend it. Its website is outdated, and recommends using GooManager (which is no longer mantained) and doesn't work anymore for this. GooManager suggests using a new, different app, which doesn't have the option of installing TWRP. Then I tried using their TWRP Manager app from play store and the image file wouldn't download. Then I tried manually selecting the image file in TWRP manager that I downloaded from their site for use via the ADB method, and it bricked my phone... twice (using two different methods the app sugested). I tried so much because in theory TWRP has the ability to decrypt android's 4.4 encryption, but after looking at their github site I noticed it was filled with people's reports (including people with the S4) on how it wouldn't work decrypting squat. So I gave up, and installed CWM in 30 seconds.
Click to expand...
Click to collapse
Disclaimer: I am not responsible for any damage or liability arising out of these steps. I did not invent anything, I just tried something. Only move forward at your risk
cnewsgrp said:
One of the things I needed was the ability to encrypt my phone (device only not external SD) for security purpose. Our phones today gives access to lot of information that I would rather not fall in wrong hands. I did lot of research and here is a working solution.
Credit goes to @Tronicus and his reply Flash a Rom on an Encrypted Android
The quote looks long however it is really very simple. To install another ROM
- Install and reboot into stock recovery, then wipe data and cache (this removes encryption).
- Then install your recovery of choice and install ROM using recovery. Philz/CWM
This has been tested working on |ROM|★KANGAKAT★|►KTU84P◄|4.4.4|Xposed|►8◄|6.26.14 by @iB4STiD
This did NOT work on a Touchwiz ROM by same developer
I have not tested any other ROM
Click to expand...
Click to collapse
I don't know if it matters too much or not, but the stock recovery you linked to is for the AT&T S4. A good rule of thumb is to never use Odin to flash anything not specifically for your particular device... In this case the M919.
Sent from my SGH-M919 using XDA Premium 4 mobile app
lordcheeto03 said:
I don't know if it matters too much or not, but the stock recovery you linked to is for the AT&T S4. A good rule of thumb is to never use Odin to flash anything not specifically for your particular device... In this case the M919.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tested stock recovery on M919 .. it works
Honestly im surprised its not talked about more since there is a big push for personal privacy when it comes to data. Encryption really is a pain in the ass to work with on android. Figuring out how to switch or update custom roms while encrypted will drive you insane. The easiest way is to just odin back to stock and start over, but that requires a computer anytime you need to flash anything.
I recently was trying out one of the 4.4.4 GPE roms and turned on encryption. It worked great until i started missing touchwiz and wanted to go back to HyperDrive TW. So the journey began...
First of all, i backed up everything to external storage since i knew everything on the internal storage would have to be wiped. I loaded the phone into recovery mode (using TWRP) and tried wiping, but all i got was a bunch of "Failed to mount" errors. Fine. Got the same error when trying to factory reset or wiping /system, /data, /cache, and anything else. Tried formatting to different file systems and then formatting back to the original but no luck. Fixing permissions didnt help. I just kept trying everything available multiple times.
Eventually it started wiping everything except the /data mount. Well... At least i could install new custom roms. Im not sure exactly what did it because i was just throwing everything at it. Anyways I got it to install, and booted into it. Nope.
Now it was saying I needed the password to decrypt the internal storage. It would detect wrong passwords fine, but as soon as i put the correct password in, it would allow me in, show the green android encryption picture, then blank screen. I thought it was just decrypting and setting up my rom but after a few hours my screen was still black and nothing was happening. Pulled battery and went back to TWRP.
I started wiping everything again and again and tried doing everything i could to wipe everything on the internal storage. Again, not sure what did it, but eventually got it all cleaned up and got a new rom installed and could boot into it.
The whole process probably took about 6-7 hours...
I dont even want to enable encryption on the new rom...
p-hil said:
Honestly im surprised its not talked about more since there is a big push for personal privacy when it comes to data. Encryption really is a pain in the ass to work with on android. Figuring out how to switch or update custom roms while encrypted will drive you insane. The easiest way is to just odin back to stock and start over, but that requires a computer anytime you need to flash anything.
I recently was trying out one of the 4.4.4 GPE roms and turned on encryption. It worked great until i started missing touchwiz and wanted to go back to HyperDrive TW. So the journey began...
First of all, i backed up everything to external storage since i knew everything on the internal storage would have to be wiped. I loaded the phone into recovery mode (using TWRP) and tried wiping, but all i got was a bunch of "Failed to mount" errors. Fine. Got the same error when trying to factory reset or wiping /system, /data, /cache, and anything else. Tried formatting to different file systems and then formatting back to the original but no luck. Fixing permissions didnt help. I just kept trying everything available multiple times.
Eventually it started wiping everything except the /data mount. Well... At least i could install new custom roms. Im not sure exactly what did it because i was just throwing everything at it. Anyways I got it to install, and booted into it. Nope.
Now it was saying I needed the password to decrypt the internal storage. It would detect wrong passwords fine, but as soon as i put the correct password in, it would allow me in, show the green android encryption picture, then blank screen. I thought it was just decrypting and setting up my rom but after a few hours my screen was still black and nothing was happening. Pulled battery and went back to TWRP.
I started wiping everything again and again and tried doing everything i could to wipe everything on the internal storage. Again, not sure what did it, but eventually got it all cleaned up and got a new rom installed and could boot into it.
The whole process probably took about 6-7 hours...
I dont even want to enable encryption on the new rom...
Click to expand...
Click to collapse
Yeah Encryption does not seem to work on TWZ roms. I tried on G Eye without luck.
I have updated op. Please check
Encryption will slow down your phone quite a bit. More battery usage + more CPU usage + slower phone = not worth it unless you've got some very private stuff you don't want being shared. Otherwise, 3rd party apps that lock a lot of files, can encrypt certain files, and hide others will do the trick perfectly well.'
Not trying to bash fully encrypting your phone, but I've tried it before and although I am very pro privacy, I had to eventually take it off due to all the extra hassle it created.
Don't know about slowing down. I am not seeing it. I feel differently about security.
I was using Chrome when the phone froze. I restarted it, and now the phone just hangs at the Samsung logo.
I have a completely stock unrooted Sprint SPH-L710. I'm moderately sure the phone is on MD4 since I didn't want Knox. It would be nice if there were a way to double check, though, since I don't remember why it stopped pestering me to upgrade. The phone doesn't boot far enough to get into safe mode, but it will enter recovery and download mode. Clearing the cache in recovery had no effect.
My PC and Kies don't see it when I connect it.
My contacts and photos are mostly backed up, so I'm more worried about salvaging other things, like Chrome bookmarks. My bookmarks aren't synchronized with Google. Apparently root is required to access them, so I never got around to it. It would be nice to recover text messages and gamesaves too. I haven't tried a factory reset yet since that would wipe everything.
What should I do from here? Is it possible to install a custom recovery at this point and use that to backup files?
Or should I try to flash a stock rom from the SD card or Odin? Or will that wipe everything or cause other problems?
I don't have USB debugging activated, so is there anything useful I'd be be able to do with ADB?
Or should I just shrug and go for the factory reset?
Thanks guys.
It's been an educational experience.
Without root or USB debugging enabled, it's apparently impossible to install custom firmware from soft bricked status.
ADB was never even able to see my phone. Not even in recovery or download modes.
Odin is a surprisingly temperamental program. It would see my phone, but not successfully flash until I uninstalled Kies. Rwilco's ROM's and one click flashes were all entirely unsuccessful. It's difficult to find older GS3 ROM's since link rot has claimed nearly all of them. There's about a million skeychy Samsung firmware/update sites, and most of them are worthless.
Heimdall is a little disappointing. You can't just point it at a ROM. You have to track down a Heimdall specific package. I couldn't find a suitable one.
Eventually, I found a sketchy Samsung firmware site that had the MD4 ROM, and it actually flashed in Odin. Then Odin stopped seeing my phone entirely.
So, I ordered a Tmobile Note 4 to use on Ting. It's cheaper, and I like the removable battery and microSD. Just for kicks, I factory reset the S3. To my surprise, the factory reset worked. I guess I should have tried that before I ordered a new phone
In the meantime, I guess I will still try to recover files, demote the S3 to media player/backup phone status, and use the incoming Note 4 as my daily driver.
From here on, I guess it means rooting and monthly backups.
Thanks guys.
When you boot into download mode you'll see your Knox flag if the phone has been upgraded to a Knoxed up firmware. I'm too lazy to check but it looks something like Knox: 0x0 or 0x1.