Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
hello. i dont know if the power button is messed in the inside , or what going on. since the phone is off and i charge it the screen lights up and the battery shows that its is charging. when the screen is off and i press the power button nothing happens but when i press any other physical key the screen will turn back on. is there any other way to turn it on using?
its a miracle i got it to turn on.
ok can i active this phone onto my account and get it repair ?
hi every body.please help me if u can
randomly, its not wake up the phone.i mean when the phone is on, when i press the power button,nothing happen,and the phone seems to be unresponsive
so i manually hold the power button more than 10 sec to restart the phone .that problem happened once in a while
any idea what is wrong ?
Background -
I bought this OnePlus 5T with a smashed screen to fix.
Paid 70 bucks for it plus the screen is just shy of 150 in total.
I was able to replace the screen and frame which was a little more complicated than I anticipated, but it ended well and the phone seems fine, although the screen quality isn't as good as stock.
***Problem - it seems that for unknown reasons, after turning off the screen pressing using the power button, screen becomes black and won't turn on, not until i hold the power button for ten seconds and restart the phone the hard way. Then the phone turns on and starts working again, but if I turn the phone off with the power button then it won't turn on again. I can tell the phone is working behind the black screen, vibration working, notification light working. But Everytime I turn the phone off with the power button I have to hard reboot the phone to get it back on again. Once this starts happening I have to factory reset to get the power button functioning normally again. It will work normally for a day or two and then out of no where the issue comes back again after pressing the power button - screen won't turn on.
Could it be software? I know it might be natural to suspect the screen is faulty, but the screen works normally until I use the power button to turn it off, and then works normally again for a couple of days after a factory reset ...
Thoughts ?
Hi all,
Problem: When the phone is turned on, locking the screen works beautifully. Once the display turns off, pressing the power button doesn't do anything... for about a minute. Then the display wakes up and everything is fine again. It doesn't sound like a hardware issue, as the power button works in recovery, and to lock the screen. The screen turns on instantly in recovery and when powering on the phone, so I don't think it's the screen's problem either.
Does anyone have any ideas to fix this problem? Thanks!