NFC repeat detection. - Samsung Galaxy Nexus

Hello,
I recently purchased a set of NFC stickers and using the tagstand launcher app and tasker I used the stickers to launch are mode in my car and set several settings in my case. The problem I am having is that every time I power on my phone it re detects the sticker and launches my commands. This can be annoying. if i set the phone to poll all the time it is constantly beeping and running my commands.
Is there any way to prevent the device from re detecting each time the phone is powered on and only running the commands when the sticker has gone out of range and come back in? I tried setting a timeout in the tagstand app, but that does not do the trick.
AOKP JB 1
Verizon.

@work said:
Hello,
I recently purchased a set of NFC stickers (...)
AOKP JB 1
Verizon.
Click to expand...
Click to collapse
Hi,
I use Tasker to launch Secure Settings in order to disable NFC if connected to Car Bluetooth
If Car Bluetooth no longer connected -> Enable NFC
Basically stopping NFC stops... NFC
NFC detected? -> Bluetooth on -> Disable NFC -> Bluetooth not connected? -> NFC On

Related

Automation - NFC Task Launcher, Tasker, others...

I wanted to start a thread that focused on automation idea's and how to execute them and NOT about troubleshooting apps or why you can't get any NFC tags to format etc...
There is already a thread dedicated to that here :
http://forum.xda-developers.com/showthread.php?t=1359057
So assuming there is a demand, please discuss any automation like:
-What you have done with your NFC tags
-What have you done with the app Tasker, NFC Task Launcher or any other automation app/scripts.
-Dream Idea's, like I want to have my house make a pizza and have it ready when I get home, but I don't know how to do that. anyone?
I'll try to keep a Table of Contents and link directly to useful idea's as we go.
Some useful links so far:
Tasker Guide thread by skulk3r
http://forum.xda-developers.com/showthread.php?t=890596
NFC Task Launcher info by krohnjw:
http://forum.xda-developers.com/showthread.php?t=980741
Reserved...
Nice thread! I use these every day!
NFC Task Launcher:
1) Tag on my laptops - Enable WiFi HotSpot, Set password and SSID, Disable Bluetooth if on, disable sync.
2) By my Door - I use a Home and Away Profile.
Away is triggered first and Disables WiFi, Enables 3G/4G, Enables Vibrate mode.
Home is triggered on second tap - Enables WiFi, Connects to my SSID, Disables 3/4G, Full Volume, Enable Sync if it was off, Launch gmail app to pull e-mails.
3) A small tag on my BT Headset - Enable BT and Connect to the headset. (When the headset is connected Tasker launches Rdio). Second tap disable BT and Tasker closes Rdio if open still.
Tasker:
1) If I am Near Cell ID by my house or friends house enable WiFi.
2) If SSID is near connect, if not disable WiFi.
3) Maps opens enable GPS, disable when closed.
4) When BT Headset connects open Rdio set media volume to 7
5) When wired headset is plugged in open Rdio set media to 11. (for the car XD)
6) When charging is pluged in set brightness to full, Max Ring volume, Enable WiFi if it's off, Enable Sync, Launch E-Mail for refresh.
7) When charged Vibrate for 30 Secs + Audio alert.
8) Proximity sensor Locks screen.
9) Long press search enable BT.
10) From 23:00 to 07:00 Dim screen to lowest setting, Vibrate mode, launch clock.
I can export them if anyone wants to use them!
Nice job! You should export those and attach them here anyway. Even if someone doesn't need exactly what you have done the profiles could be a really good learning tool. Really nice job on some of those.
I am trying to have interactions with specific programs using tasker without much luck. What I would love to do is turn my TV on and go to my DVR using the Google TV app when I place my phone on the coffee table with a nfc sticker.
Sent from my Galaxy Nexus using XDA App
Ive got a 'beacon for android' coming in the mail. when it gets here im hoping to hide a nfc card in the arm rest of my couch so when i put the phone down it will turn on the tv and will launch to the universal remote part of the dijit program.
Im thinkin all that might take some work tho. Also i would love to be using iRule/GC-100-12 or the logitech revue/harmony but cant afford to set those systems up.
I also have another NFC card on my desk so when i put my phone down it starts my computer (Using NFC launcher and tasker).
One idea i would love your opinons on is, can tasker determing if a microusb plugged in is a charger or computer or MHL/HDMI connection? i would love for my gallary or emulation to pop up when i plug it into a tv
unknownkwita said:
Ive got a 'beacon for android' coming in the mail. when it gets here im hoping to hide a nfc card in the arm rest of my couch so when i put the phone down it will turn on the tv and will launch to the universal remote part of the dijit program.
Im thinkin all that might take some work tho. Also i would love to be using iRule/GC-100-12 or the logitech revue/harmony but cant afford to set those systems up.
I also have another NFC card on my desk so when i put my phone down it starts my computer (Using NFC launcher and tasker).
One idea i would love your opinons on is, can tasker determing if a microusb plugged in is a charger or computer or MHL/HDMI connection? i would love for my gallary or emulation to pop up when i plug it into a tv
Click to expand...
Click to collapse
Wait... are these possible?
I would love a 'Morning TV' tag:
Launch Google TV app
Turn on TV
Turn on Speakers
Change to channel 70 (ESPN)
Open __ url
I'd pay someone to make that for me.. and many others.
Sent from my Galaxy Nexus using xda premium
itsjusttim said:
Wait... are these possible?
I would love a 'Morning TV' tag:
Launch Google TV app
Turn on TV
Turn on Speakers
Change to channel 70 (ESPN)
Open __ url
Click to expand...
Click to collapse
its entirely possible, just takes alot of apps and hardware.
1. NFC Card launches the particular activity in the universal remote app (dijit/irule/harmony/etc) this may require tasker.
2.Remote app performs its functions.
2.1.connects via BT/WIFI to a controller (these can emit IR/RF/rs232/TCP)
2.2.the controller sends out all the commands to all the devices, alot of this will need to be programmed in your remote app
3. NFC launcher/tasker then launches the app activity that shows you the remote.
There is alot of stuff to get your head around in controlling a home theater because there are so many differant ways of doing the same thing. How you make all this work will depend on your current system and how much your willing to spend.
For example some tv's come with HDMI-CEC (look it up on wiki), this feature allows the tv to turn on the av receiver over the hdmi cable and swap it to the correct input when you change sources.
when it comes down to it the android app is the easiest part of the system to set up, even if its the most featureless.
Well the Google TV app acts as a remote. Is there a way to record touch actions on top of opening apps? If so it should be easy as its just a few buttons to turn on everything and get to the right channel, would just be amazing if it can all be automated.
- GSM Galaxy Nexus
x942 said:
Nice thread! I use these every day!
NFC Task Launcher:
1) Tag on my laptops - Enable WiFi HotSpot, Set password and SSID, Disable Bluetooth if on, disable sync.
2) By my Door - I use a Home and Away Profile.
Away is triggered first and Disables WiFi, Enables 3G/4G, Enables Vibrate mode.
Home is triggered on second tap - Enables WiFi, Connects to my SSID, Disables 3/4G, Full Volume, Enable Sync if it was off, Launch gmail app to pull e-mails.
3) A small tag on my BT Headset - Enable BT and Connect to the headset. (When the headset is connected Tasker launches Rdio). Second tap disable BT and Tasker closes Rdio if open still.
Tasker:
1) If I am Near Cell ID by my house or friends house enable WiFi.
2) If SSID is near connect, if not disable WiFi.
3) Maps opens enable GPS, disable when closed.
4) When BT Headset connects open Rdio set media volume to 7
5) When wired headset is plugged in open Rdio set media to 11. (for the car XD)
6) When charging is pluged in set brightness to full, Max Ring volume, Enable WiFi if it's off, Enable Sync, Launch E-Mail for refresh.
7) When charged Vibrate for 30 Secs + Audio alert.
8) Proximity sensor Locks screen.
9) Long press search enable BT.
10) From 23:00 to 07:00 Dim screen to lowest setting, Vibrate mode, launch clock.
I can export them if anyone wants to use them!
Click to expand...
Click to collapse
Yes, I personally would love to use about 2/3 of those commands. Can you export those for the rest of us?
itsjusttim said:
Well the Google TV app acts as a remote. Is there a way to record touch actions on top of opening apps? If so it should be easy as its just a few buttons to turn on everything and get to the right channel, would just be amazing if it can all be automated.
- GSM Galaxy Nexus
Click to expand...
Click to collapse
So far I haven't found a way. It would be awesome for more than just google tv. If tasker, or another 'macro' type program could be set to record touches on the screen based on location coordinates or something. Like a mouse macro program on a pc. That would allow all sorts of things. For example all of this would be reality with this one hurdle:
1) When I approach my home using tasker, open my ADT app and disable the alarm in my house
2) Open my garage door with HTN app.
3) Turn the lights on with the HTN app.
4) Walk inside, and using a NFC sticker, trigger a welcome home message from my denon reciever app (hooked up to speakers throughout the house) and start some jazz music. Of course set my phone profile correctly, and maybe turn the google tv on and navigate to the cheesy firplace app.
All of this is easy, with one macro app that is the missing link.
There are apps out there that use your cell tower to turn your wifi on/off when you enter/leave your home/cell tower. you'd be surprised how accurate it is and how it doesn't drain your battery. They do other things like control gps/bluetooth/etc.
and their free and dont require purchase of tags. You could easily do this exact thread with just the app below.
They might not be able to turn your tv on, but for quality automation, you should check em out.
For one I highly recommend, try Llama in the market. Free too!
https://market.android.com/details?...t#?t=W251bGwsMSwxLDEsImNvbS5rZWJhYi5MbGFtYSJd
btw, I am not affiliated with llama in any way. Just love this app and many of your comments reflect that you would love this.
igl007 said:
So far I haven't found a way. It would be awesome for more than just google tv. If tasker, or another 'macro' type program could be set to record touches on the screen based on location coordinates or something. Like a mouse macro program on a pc. That would allow all sorts of things. For example all of this would be reality with this one hurdle:
1) When I approach my home using tasker, open my ADT app and disable the alarm in my house
2) Open my garage door with HTN app.
3) Turn the lights on with the HTN app.
4) Walk inside, and using a NFC sticker, trigger a welcome home message from my denon reciever app (hooked up to speakers throughout the house) and start some jazz music. Of course set my phone profile correctly, and maybe turn the google tv on and navigate to the cheesy firplace app.
All of this is easy, with one macro app that is the missing link.
Click to expand...
Click to collapse
Yes! Now we just need someone smart who can create this for us. Honestly if someone made this, the possibilities of NFC would be endless.
.
kegman913 said:
There are apps out there that use your cell tower to turn your wifi on/off when you enter/leave your home/cell tower. you'd be surprised how accurate it is and how it doesn't drain your battery. They do other things like control gps/bluetooth/etc.
and their free and dont require purchase of tags. You could easily do this exact thread with just the app below.
They might not be able to turn your tv on, but for quality automation, you should check em out.
For one I highly recommend, try Llama in the market. Free too!
https://market.android.com/details?...t#?t=W251bGwsMSwxLDEsImNvbS5rZWJhYi5MbGFtYSJd
btw, I am not affiliated with llama in any way. Just love this app and many of your comments reflect that you would love this.
Click to expand...
Click to collapse
We don't really need location profiles as we can just use an nfc tag to set any automation we want... right?
- GSM Galaxy Nexus
itsjusttim said:
Yes! Now we just need someone smart who can create this for us. Honestly if someone made this, the possibilities of NFC would be endless.
.
We don't really need location profiles as we can just use an nfc tag to set any automation we want... right?
- GSM Galaxy Nexus
Click to expand...
Click to collapse
Well we still need them a little. For example, I go to the same grocery store each week. So I like to have it that when I arrive, it connects to their wifi and launches the Grocery IQ app. Then it sends a text message to my wife saying "I just arrived at Wegmans, if there is any last minute items to get add it to Grocery IQ now."
alicious said:
Yes, I personally would love to use about 2/3 of those commands. Can you export those for the rest of us?
Click to expand...
Click to collapse
Will do! I have to recreate them (my HTC Amaze had them and I forgot to export before doing a reset). I should have them up tonight!
x942 said:
Will do! I have to recreate them (my HTC Amaze had them and I forgot to export before doing a reset). I should have them up tonight!
Click to expand...
Click to collapse
Thanks. I'll keep a look out for them
X942 - you didn't forget about us did you?
Sent from my Galaxy Nexus using xda premium
I used to use Locale, until it just ate up too much juice on my phone. One nice thing I could do with it is change my Google Voice settings based on my location. I had it set to disable my desk phone if I wasn't at work, and to enable it when I arrived at the office. Can you do something like this via NFC? IIRC Tasker is compatible with Locale plugins, so I could just use that.
kimboinatl said:
I used to use Locale, until it just ate up too much juice on my phone. One nice thing I could do with it is change my Google Voice settings based on my location. I had it set to disable my desk phone if I wasn't at work, and to enable it when I arrived at the office. Can you do something like this via NFC? IIRC Tasker is compatible with Locale plugins, so I could just use that.
Click to expand...
Click to collapse
I totally agree with you about locale
Sent from my Galaxy Nexus using xda premium
x942 said:
3) Maps opens enable GPS, disable when closed.
Click to expand...
Click to collapse
How did you get it to allow Tasker to control GPS? It tells me this functionality is not allowed on my Nexus...I am trying to enable it in Actions -> Misc -> *GPS
Do you on a ROM that has disabled the restriction that does not allow access to GPS?
**** UPDATE ****
Ok, did some more searching and found this...
http://www.reddit.com/r/tasker/comments/nk6m2/use_secure_settings_to_enable_gps_and_other_fun/
NFC Task Launcher
EDIT: My Questions were answered on a different board.

Custom programmed nfc tag ideas.

I bought some nfc tags from the good people over at tagsfordroid.com and took the weekend to program a few of the tags. I thought it would be cool to list some of the programs/actions people have programmed into the tags so others can get some good ideas.
Program: NFC Task Launcher.
Work tag:
~switch tag.
1. Get to work:
Disable wifi
set ringer type vibrate
set brightness to 26
disable bluetooth
2. Leave work:
Enable Wifi
Set Ringer type Normal
Enable Auto-Brightness
Ringer Volume 7
NFC on key chain.
~switch tag.
1. hotspot on:
enable portable hotspot
set brightness to 16
disable wifi
disable bluetooth
2. hotspot off:
disable portable hotspot
enable wifi
enable bluetooth
enable wifi
That's all i have for now. lets see what else everyone is programming into their nfc chips.
i also put an nfc tag by my calendar at my work to pull up my calendar app when i tap my calendar.
Put a tag on my car dock to turn off wifi, turn up ringer and media volume, and start pandora
Have one on my valet at home to turn on wifi and set ringer to vibrate
Sent from my Galaxy Note using xda premium
neevz said:
Put a tag on my car dock to turn off wifi, turn up ringer and media volume, and start pandora
Have one on my valet at home to turn on wifi and set ringer to vibrate
Sent from my Galaxy Note using xda premium
Click to expand...
Click to collapse
cool!
alicechong89 said:
Here is another page for Creative Uses for NFC Tags
http://forum.xda-developers.com/showthread.php?t=1447678&highlight=nfc+tags
Click to expand...
Click to collapse
good article i saw that one when doing a search.
Just thought it would be cool to actually show the action items that were posted to the tags so someone could reproduce it if they thought it was a good idea.
has anyone figured out how to turn on and off an exchange account with NFC? I would love the tag that i use when i leave my office to turn on my exchange account mail so i can get my e-mail while im at home. I dont need it on while im at work because im in front of a computer all day and have access to my e-mail.
chambers7867 said:
has anyone figured out how to turn on and off an exchange account with NFC? I would love the tag that i use when i leave my office to turn on my exchange account mail so i can get my e-mail while im at home. I dont need it on while im at work because im in front of a computer all day and have access to my e-mail.
Click to expand...
Click to collapse
I'm sure that you could set something up using a combination of NFC Task Launcher and Tasker.
Also, while I'm tooling around trying different tags, It seems that placing tags on a metal background causes them to not work... I have had no success placing them on the side of the front door (metal door...) so I can touch it on my way out the door. Also all the desks and everything else for that matter is metal at work (Navy) so placing a "work" tag has proven to be rather difficult to accomplish successfully... May have to try different types of tags to see if there is success with another type.
Ammontj said:
I'm sure that you could set something up using a combination of NFC Task Launcher and Tasker.
Also, while I'm tooling around trying different tags, It seems that placing tags on a metal background causes them to not work... I have had no success placing them on the side of the front door (metal door...) so I can touch it on my way out the door. Also all the desks and everything else for that matter is metal at work (Navy) so placing a "work" tag has proven to be rather difficult to accomplish successfully... May have to try different types of tags to see if there is success with another type.
Click to expand...
Click to collapse
Get metal isolating tags, they have an isolation layer between the IC and the surface you place them on so they work on metal. They are a bit thicker as a result.
place them on so they work on metal
There is a mod in the EVO 4g LTE and HTC one x forums that let's you choose when NFC can be read.
Screen on and unlocked,
Screen on and locked, or
Screed off (obviously locked)
I modded the phone to read tags when the screen is on and even if the phone is still locked. Allowing it to read while the screen is off may be a security risk for some.
Anyway,
On my keychain:
Switcher:
WiFi off, Bluetooth on, volume up, brightness up, latitude check in, plays media player.
This is great because it automatically connects to my car Bluetooth headset and the HTC aux stereoclip so music starts playing through my car speakers wirelessly via swipe of the keychain.
Tap again to disable all these and check in again w latitude.
I also have a separate tag in my car low on the dash to enable GPS and open maps so I don't have to fiddle w my phone througg the settings and open the app drawer to open maps. Makes driving that much safer. Also, I don't always use GPS, so having a separate tag for it from my keychain saves battery by using it only when needed.
Trying to set up a tag to enable WiFi tether for root users and stick it to my laptop/pc for quick swiping and enabling. But that has been tricky as you either have to use tasker or a custom activity in NFC task launcher.
Can't think of any others relevant to my interests. I don't see the need in making 38583983 tags. I definitely use the ones in the car tho.
I may order a wristband and think up something creative for it. Assigning a "sync all" activity would rock for it as I keep auto-syncing on my phone off and only sync email and such when I see fit.
Phew.
Sent from my EVO using XDA
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Since the phone would be constantly against the tag, though, would it be continually triggering switches back and forth? Or would the initial switch trigger upon putting it in the dock, but in order to trigger the 2nd switch upon removal I'd need to move it away from the tag, then tap it back on the tag to initiate another trigger?
Thanks for your help. Trying to fully grasp how the NFC tags work.
hollywoodfrodo said:
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Since the phone would be constantly against the tag, though, would it be continually triggering switches back and forth? Or would the initial switch trigger upon putting it in the dock, but in order to trigger the 2nd switch upon removal I'd need to move it away from the tag, then tap it back on the tag to initiate another trigger?
Thanks for your help. Trying to fully grasp how the NFC tags work.
Click to expand...
Click to collapse
With android there's no indication that a tag has gone out of "range" broadcast to the system. Essentially to get the tag to re-fire you'd need to either move out of range and then back in or turn the screen off (disables NFC) and then back on and unlock the device (restarts NfC and re-reads the tag).
hollywoodfrodo said:
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Since the phone would be constantly against the tag, though, would it be continually triggering switches back and forth? Or would the initial switch trigger upon putting it in the dock, but in order to trigger the 2nd switch upon removal I'd need to move it away from the tag, then tap it back on the tag to initiate another trigger?
Thanks for your help. Trying to fully grasp how the NFC tags work.
Click to expand...
Click to collapse
Two important points
1) NFC doesn't usually work with screen off, so you either need to patched NFC.apk (for example AOKP b40 has this feature) - otherwise, everytime you switch on screen, it would trigger the tag again
2) there really is no way to trigger action on tag removal
I solved this (sort of) by having two tags - one in dock and other one that resets to "default" settings that I swipe after I leave. Not pretty but working...
Or you can set the actions as toggles, so one touch - set for dock mode, and second touch - revert back. But it obviously doesn't work for everything.
Simple solution to that, get an app that detects other hardware features so it can detect when its being moved, ie proximity detection, orientation.
You could also get a fabric nfc tag and sew it into your pocket?
Sent from my GT-I9300 using xda premium
I created a tag that does the following:
->Turns WiFi on
->Waits until I'm connected to my home WiFi connection.
->Sends a WOL packet to my desktop at home
->Wait 20 seconds
->Turn Wifi Off
So when I get home from work I can put my phone down on the tag and my PC will automagically begin booting
For the obvious uses, don't forget night mode - turn ringer off (or on, depending) turn off mobile data, connect to home wifi, etc.
If you just want to mess with tags, go to your local tmo or bestbuy store and pick up a pack of the samsung tectiles. They aren't as cheap as you get online ($15 for 5 vs $1-$2 each) but they are decently large and work just fine. Once you run out you know its time to order a bunch, and you'll probably have a better idea which ones you want to order.
As an old-school embedded hacker, does anyone know of a vendor that sells the DESfire E2V tags with a tag dev kit? I've got a bunch of ideas for cool apps, but I need to be able to modify the OS on the tag. (Take a look at the specs, its pretty neat. up to 32k of storage, with security etc, all running on an old Intel embedded CPU from the 80s.) The only ones I've found so far have the firmware distinctly read-only. I suspect it is using the on-chip ROM, which means it would take impossibly delicate surgery to replace. (There is a pin that toggles between booting on-chip and external.) In theory a dev kit would be set to external and come with a jig or other tool to write it, as well as OS binaries for the standard NFC OS..
As a random easy example of stuff you could do, think of a write-only tag that took vcards for a mailing list (or a roll call) but didn't let anyone but the authorized user read them out again. Right now you'd need to put a full embedded computer behind an active NFC module to do that - a lot more expensive and more failure-prone than a custom tag..
The command IF
neevz said:
Put a tag on my car dock to turn off wifi, turn up ringer and media volume, and start pandora
Have one on my valet at home to turn on wifi and set ringer to vibrate
Sent from my Galaxy Note using xda premium
Click to expand...
Click to collapse
I think that without the command "IF" and "SWITCH" the use of this tags is too easy and useless.
Are these two commands available?
hollywoodfrodo said:
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Click to expand...
Click to collapse
I had problems with double-reading when I'd fumble putting the phone in the car dock. It snaps into place the dock, and it would sometimes read when it got close to the dock, then again when it snapped into the cradle.
I put the tag on my sun visor instead. Sit down, touch the phone to the visor, put it in the car dock. Arrive at work, pull the phone from the dock, touch the visor, and go.
Same thing with my at work tag - I put it on the side of my desk so it wouldn't re-trigger if I removed the phone from my work dock to answer it.
Anything is possible with Tasker
mmameli said:
I think that without the command "IF" and "SWITCH" the use of this tags is too easy and useless.
Are these two commands available?
Click to expand...
Click to collapse
You can definitely do "IF" commands if you use Tasker along with NFC Tags. Since Tasker doesn't natively support NFC, switch isn't a possibility, but since switch is built into many NFC apps, that's an easy one.
I programed my vcard on a tag and put it in my wallet.. Instead of exchanging info if they have an android or blackberry with nfc I just hold my wallet to their phone for a second and it will open the vcard on their phone and ask if they want to save it.
The tag is always in my wallet ready to go.
Surprisingly I've used it more then I thought I would already.. It's kind of fun also and people get a kick out of it.
Sent from my SAMSUNG-SGH-I747 using xda premium

[Q] New to NFC. Couple of Qs.

I'm not new to android but this is my first phone with NFC. I got some tags from tagstand and have been using the NFC Task Launcher with great success but I have a couple of questions.
Is there any way to silence the notification when reading an NFC tag? Its usually ok but when I use the tag next to my bed to turn off sounds etc. and my wife is already asleep and it makes that sound it drives her nuts. I have the notification ringtone set to silent in the NFC Task Launcher app.
Is there a mod that works with CM10 to allow for scanning nfc tags with the screen off? Having to turn on the screen and unlock the phone defeates most of the purpose of using the NFC tags. I found this thread with a mod but it only works for the stock rom (I tried it and it killed all NFC for my on CM10).
Thanks for the help!

[Q] LG Tag+ confirmation when scanning a NFC tag

I was playing around with the NFC tags that came with the phone, and the default setting for the LG Tag+ app is to show a confirmation dialog when you scan a tag. But after I checked the box to skip the confirmation I can't find the option to turn it back on again. Anyone know where I can turn it back on?

NFC proximity app?

Is there an NFC tag writer that will allow a tag to work in proximity? What I'm looking to do is to mount a peel and stick tag to my car's windshield mount. Then when the phone is in the mount, it will trigger the tasks I've programmed. When i remove the phone from the mount, I'd like the phone to toggle back to the way it was before it was placed into the mount.
I thought i had an app a while ago that would allow this, but i can no longer find it.
I personally haven't tried it, but I did a quick search in the play store for " tasker nfc" and this sounds like it may do the trick for you:
NFC Retag freehttps://play.google.com/store/apps/details?id=com.widgapp.NFC_ReTAG_FREE
Sent from my Optimus G Pro using xda app-developers app
CapnPez said:
I personally haven't tried it, but I did a quick search in the play store for " tasker nfc" and this sounds like it may do the trick for you:
NFC Retag freehttps://play.google.com/store/apps/details?id=com.widgapp.NFC_ReTAG_FREE
Sent from my Optimus G Pro using xda app-developers app
Click to expand...
Click to collapse
I have that app and i don't see a proximity setting. BTW, that app allows you to set what i would call macros on your phone. Unlike other NFC apps that write directly to the tag, this one stores the tag's ID on your phone, and then you associate a bunch of commands with that tag ID. So when the phone "sees" the tag, it then executes the stored commands that were stored on the phone, without anything having to be stored on the tag itself.
andygold said:
I have that app and i don't see a proximity setting. BTW, that app allows you to set what i would call macros on your phone. Unlike other NFC apps that write directly to the tag, this one stores the tag's ID on your phone, and then you associate a bunch of commands with that tag ID. So when the phone "sees" the tag, it then executes the stored commands that were stored on the phone, without anything having to be stored on the tag itself.
Click to expand...
Click to collapse
Oh, I see what you mean. I hadn't understood what you meant by the "proximity setting" (I've never used NFC tags). Just to be clear, is the difference in that the profile is changed depending on whether the tag is either in contact or not, i.e. car mode when in contact and then detects the loss of connection when removed and restores to previous profile?
Again, I'm not sure if this helps, but I found this thread from a GS3 forum:
http://forum.xda-developers.com/showthread.php?t=2171952
It sounds more like what you were asking, but I'm not sure if it's only for the GS3.
CapnPez said:
Oh, I see what you mean. I hadn't understood what you meant by the "proximity setting" (I've never used NFC tags). Just to be clear, is the difference in that the profile is changed depending on whether the tag is either in contact or not, i.e. car mode when in contact and then detects the loss of connection when removed and restores to previous profile?
Again, I'm not sure if this helps, but I found this thread from a GS3 forum:
http://forum.xda-developers.com/showthread.php?t=2171952
It sounds more like what you were asking, but I'm not sure if it's only for the GS3.
Click to expand...
Click to collapse
Yeah, I saw that when I searched. That is basically what I'm looking for. The thing is, I could have sworn that at one point I had an app that had proximity built in as standard. Maybe it was just for rooted phones, I don't remember...
I hadn't actually used it back then for proximity, but I thought it was there to be used.
To answer your question, Yes! With proximity, you could set your phone for the normal day to day operation. Then for example, at bed time, you could place your phone into a charging dock that has a peel and stick NFC tag on it's face, and when the phone gets near enough, the tag would activate the tasks you have programmed into the tag. For example, you could turn off WiFi, turn off the ringer, Turn the brightness down to minimum, set a wake alarm/volume/tone, etc... Then, in the morning, when you remove the phone from the dock and it loses proximity with the NFC tag, the tasks will revert to their "daytime" mode, and the brightness will come back up, the WiFi will turn back on, etc...
I realize that all of this can be done by setting the tag to "toggle" functions in that the first swipe of the tag could turn WiFi off, and the next swipe of the same tag would turn it back off, but obviously I don't want to "toggle" by using multiple swipes. I want proximity. (another way would be to use two separate tags near each other and one would be the daytime tag and the other would be for nighttime...)
for the car, I want to turn brightness down a bit (I do most of my driving at night), turn on bluetooth (to sync with my handsfree device), turn WiFi off while driving, start my music app and play a specific playlist, turn the volume up to max (my cassette adapter has very low volume, and the phone automatically lowers the volume when the headphone jack is plugged in), and announce each thing as it is happening (yes that's currently an option)....
i dont use NFC
phamtung8xhd said:
i dont use NFC
Click to expand...
Click to collapse
Thanks for posting your helpful and insightful comments. They truly add to this thread!!
Anyone else have any thoughts as to whether or not an app exists that allows NFC to work with a proximity setting?
Might this help you?
I understand that what you're probably looking for is an app to "program the NFC tag" itself but I hope you find this helpful until you find what you are looking for.
You can try using an app like Llama (the location aware Brazilian camel ...) to set different profiles (with settings and all) for home, work, CAR,etc. Have Llama identify the Areas first (Don't worry about car at this point just tweak the settings for the car profile). In the events tap you can define a condition (NFC tag detected) to an action (activate profile A: Car).
For when you arrive to your destination and want your phone settings to change to suite your new location i.e. activate a different profile, you can create an event -also in the events tab- triggered when the condition (Enter/In Area)is met. Llama will then alter your settings to the ones you have set for the new area you arrived to i.e. change Car profile to Home or Work. The reason why you have to create another event to change profiles after you get out of the car, after NFC tag disconnected, is that Llama can't detect when a certain NFC tag is disconnected -my understanding- so you have to create a new trigger to bring about a new event.
Keep us informed of your progress as I am really interested in Automation myself. Cheers.

Categories

Resources