[SOLVED] Galaxy SIII recovery issue - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hello,
Let me start off by saying if this is the wrong place to post this please inform me of the right forum.
I just recently got a Samsung Galaxy SIII (on August 29) and everything was working really well, until today. Yes it is rooted. I plugged the phone into my computer and Kies said there was a firmware update for my phone. I began doing the upgrade and my beloved windows computer got the blue screen of death during the actual update process.
After restarting my computer, I began to do the update recovery to continue with my upgrade. Same blue screen. I spoke to a rogers tech rep and he requested I re-install my Kies software, which I did. Upon having no success from that I began to do more research, however most of them are saying to reflash the stock firmware (which I have) using ODIN. I have no success here as well. Every time i do get into download/recovery mode, ODIN recognizes my phone, but fails when i click start.
In my recovery mode the information i see is as follows:
ODIN MODE
PRODUCT NAME: SGH-1747M
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
Is there anything at all I can do to fix this? Or am I one of those most unfortunate people who just got screwed lol.
ANY assistance is VERY MUCH appreciated!
Thanks in advance

If you have clockwork recovery, try formatting the system first then flash the ROM. Just dont reboot without flashing the ROM first.
Have you tried the emergency firmware load through KIES?
Sent from my SGH-I747M using xda app-developers app

cue_32 said:
If you have clockwork recovery, try formatting the system first then flash the ROM. Just dont reboot without flashing the ROM first.
Have you tried the emergency firmware load through KIES?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
thank you for the quick reply! sorry for my late one, just got home from a family emergency...
no I don't have CWM.. I'm very familiar with it though I didn't put it on my SIII (i was planning to do so tonight)
I've tried the emergency firmware, however it asked for a code which I don't have :S
I'm new to Samsung's version of Android, previously I owned an Xperia X10

Try running Odin on a different computer

If you're using a desktop use the usb ports on the back Odin don't like the usb hub on front, or try different computers, I have one computer that Odin will never work on but I go right to my other one and works fine, try restarting pc or uninstall Odin and download a different version, also try downloading a few different roms try these below, I've been in that position then finally after trying and trying a Rom will finally take
http://forum.xda-developers.com/showthread.php?t=1739426
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

rob1216 said:
If you're using a desktop use the usb ports on the back Odin don't like the usb hub on front, or try different computers, I have one computer that Odin will never work on but I go right to my other one and works fine, try restarting pc or uninstall Odin and download a different version, also try downloading a few different roms try these below, I've been in that position then finally after trying and trying a Rom will finally take
http://forum.xda-developers.com/showthread.php?t=1739426
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
that worked!!!!!!!!! thank you, i just changed the USB port lol.. its always something so simple you wouldn't think to do it initially!
thanks so much!

Related

Help Please: Phone not booting up

Strange thing happened to my phone yesterday night. I was watching netflix for a while and after some time the screen just went blank. I am not able to restart the phone. It got struck in the kernel bootup(Darkside kernel, TDJ's darkside rom) and it was restarting again and again till i remove the battery.
I am able to get into recovery mode but not able to restore any of my backup's. It just went blank during restoring system. I tried installing the same ROM(Darkside Digitsl warfare v2.5.1) from my internal SD card but it just went blank after some time. I tried the juggernaut-5 . It didnt throw up any error but when i restart it its again displaying the darkside kernel and boot looping.
Any one can you please help me to get out of this mess. I need to travel on Monday so desperately need my phone fixed before that. Please help. I have not installed anything new over the last 1 month and didnt have any problems till now. Thank you
System Details:
ROM: Darkside Digitsl warfare v2.5.1
ClockworkMod Recovery v5.0.2.7
Flash super wipe kernel cleaner then reflash the ROM then go back if you made a nandroid backup restore the data and system
Sent from my SGH-T989 using xda premium
Help please
I am not able to connect my phone in USB mode, Can i be able to do an ODIN?.
I am able to connect in download mode,recovery mode.Please help. Thank you
peppersu812 said:
Flash super wipe kernel cleaner then reflash the ROM then go back if you made a nandroid backup restore the data and system
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
LORD_VOLDEMORTT said:
I am not able to connect my phone in USB mode, Can i be able to do an ODIN?.
I am able to connect in download mode,recovery mode.Please help. Thank you
Click to expand...
Click to collapse
Which recovery version are you running?
LORD_VOLDEMORTT said:
I am not able to connect my phone in USB mode, Can i be able to do an ODIN?.
I am able to connect in download mode,recovery mode.Please help. Thank you
Click to expand...
Click to collapse
Yes Odin back to stock..... flash recovery and then restore
Sent from my SAMSUNG-SGH-I727 using xda premium
Danial723 said:
Yes Odin back to stock..... flash recovery and then restore
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
What he said. Just remember to put the rom file into the PDA field in Odin
Sent from my SAMSUNG-SGH-T989 using xda premium
Yeah Odin should fix all that but If your on Telus I wouldnt run any Tmobile roms although they work it can cause headaches like this IMO
Sent from my SGH-T989D using XDA
When i try to ODIN the stock room it failed in the middle now i am struck in the screen download mode. I cant go anwhere from here. Is that the end?.Please help.
Also can i send it to samsung for warranty exchange?.Any phone numbers for samsung pls help. THank you
Will they be able to make it i installed custom rom in it. In the ODIN mode it still shows custom binary mode : NO
Firmware upgrade encountered an issue.Please select recovery mode in Kies and try again.
LORD_VOLDEMORTT said:
When i try to ODIN the stock room it failed in the middle now i am struck in the screen download mode. I cant go anwhere from here. Is that the end?.Please help.
Also can i send it to samsung for warranty exchange?.Any phone numbers for samsung pls help. THank you
Will they be able to make it i installed custom rom in it. In the ODIN mode it still shows custom binary mode : NO
Firmware upgrade encountered an issue.Please select recovery mode in Kies and try again.
Click to expand...
Click to collapse
Try it again. The phone has to be in download mode before you plug it into the computer. And are you flashing it as PDA? People have reported it taking a couple tries.
Usually if you can get into download mode you can fix it. If you're stuck and your computer won't recognize your phone, try getting back into download mode. If you're sending it in for repair anyways, it's better to have a full brick so they can't see that you rooted.
Another option if you can't get into download mode, buy a USB Jig, they are usually less than $10 and they can sometimes get you back into download mode.
Sent from my SAMSUNG-SGH-T989 using xda premium
It does take a few tries sometimes
Sent from my SGH-T989 using xda premium
Thanks. I tried it multiple times but still the same screen. I tried with a USB jig, and still the same screen. I am not able to go past that?. Is that a full brick?.
I called T-Mobile and they are sending me a new phone on Tuesday. But need make sure its fully bricked. Thank you
LORD_VOLDEMORTT said:
Thanks. I tried it multiple times but still the same screen. I tried with a USB jig, and still the same screen. I am not able to go past that?. Is that a full brick?.
I called T-Mobile and they are sending me a new phone on Tuesday. But need make sure its fully bricked. Thank you
Click to expand...
Click to collapse
What screen are you talking about? The download screen?
If you're seriously wanting to give up trying, and want to brick it, try flashing a stock rom from a different phone via Odin.
Sent from my SAMSUNG-SGH-T989 using xda premium
Towle said:
What screen are you talking about? The download screen?
If you're seriously wanting to give up trying, and want to brick it, try flashing a stock rom from a different phone via Odin.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Yes its struck in the download screen with the error.I was trying to ODIN to stock tmobile ROM and see if it brings back the phone but it failed inbetween and after that i am struck with the download screen with the below error message. I tried different modes, normal power on, recovery mode, download mode, USB jig - download mode but no sucess?. Is that the end. Please help. Ami i good for a exchange? Thanks a lot
"Firmware upgrade encountered an issue.Please select recovery mode in Kies and try again."
LORD_VOLDEMORTT said:
Yes its struck in the download screen with the error.I was trying to ODIN to stock tmobile ROM and see if it brings back the phone but it failed inbetween and after that i am struck with the download screen with the below error message. I tried different modes, normal power on, recovery mode, download mode, USB jig - download mode but no sucess?. Is that the end. Please help. Ami i good for a exchange? Thanks a lot
"Firmware upgrade encountered an issue.Please select recovery mode in Kies and try again."
Click to expand...
Click to collapse
Bricked...
alphadog32 said:
Bricked...
Click to expand...
Click to collapse
So Am i good for an warranty exchange? or will samsung would be able to know i installed custom roms. In the ODIN mode it still shows custom binary mode as NO.
The strange thing is i didnt do anything on my phone for last 1 month. The only thing i could think off is, one of scheduled titanium backup ran at 3.00 AM when i was in netflix with the phone charging,and i got a msg that the backup failed. When i woke up it started boot looping. And during the ODIN i tried today, I was making sure i am doing right by following the guidelines(ODIN back to stock).
I have all my nandroid backups(different rom versions) & titanium backups, will i be able to use it in my new phone after rooting with the same recovery version?
Thank you. I really appreciat all your help.
LORD_VOLDEMORTT said:
So Am i good for an warranty exchange? or will samsung would be able to know i installed custom roms. In the ODIN mode it still shows custom binary mode as NO.
The strange thing is i didnt do anything on my phone for last 1 month. The only thing i could think off is, one of scheduled titanium backup ran at 3.00 AM when i was in netflix with the phone charging,and i got a msg that the backup failed. When i woke up it started boot looping. And during the ODIN i tried today, I was making sure i am doing right by following the guidelines(ODIN back to stock).
I have all my nandroid backups(different rom versions) & titanium backups, will i be able to use it in my new phone after rooting with the same recovery version?
Thank you. I really appreciat all your help.
Click to expand...
Click to collapse
It's not bricked, dude. It's still in dl mode when it says that. It will just take some more tries to get a tar to flash.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Make sure you use Samsung usb cable when Odin and if use Win 7 use run as Administrator mode
Sent from my SGH-T989 using xda premium
Plug it in to computer, what recognized device does it say?
alphadog32 said:
Plug it in to computer, what recognized device does it say?
Click to expand...
Click to collapse
my ODIN still recognoize my device but when i try to ODIN the stock rom or the kernel its faliling in the nadroid write - failed. Now i could see my binary counter as 1.
Am i doomed. Please hellpppppp. My computer doesn not recognize my device but the ODIN does. Please help
LORD_VOLDEMORTT said:
my ODIN still recognoize my device but when i try to ODIN the stock rom or the kernel its faliling in the nadroid write - failed. Now i could see my binary counter as 1.
Am i doomed. Please hellpppppp. My computer doesn not recognize my device but the ODIN does. Please help
Click to expand...
Click to collapse
Are you running Odin as administrator?
Manually download the device drivers from the how to root thread and install them on your computer. right click on Odin and run as administrator. Open the stock rom file in the PDA field and run it.. There is no reason it shouldn't work if you can get into download mode.
Try downloading the stock rom again, maybe it's a bad download.
Sent from my SAMSUNG-SGH-T989 using xda premium

ISSUES UPDATING TO Jelly bean

I have an ATT Galaxy S3 its been two days I've been trying to update from 2 different computers. I don't know what else to do. Someone please help me
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
GrapePopRocks said:
I have an ATT Galaxy S3 its been two days I've been trying to update from 2 different computers. I don't know what else to do. Someone please help me
Click to expand...
Click to collapse
Couple of questions before anyone can answer...
1 . How are you trying to update .. through KIES or ODIN ?
2 . How are you connecting it to your computer via USB .. Front or Rear ports ?
Using Kies and side ports on laptop
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Are you using the micro usb cable that came with the phone?
A lousy cable or as mentioned above a crummy usb port could be a source of problems. Also is the laptop plugged in and the s3 fully charged?
Kies uses Odin to flash the firmware update via the USB cable to the phone, so technically you are using Odin. You wouldn't really notice Odin was being used during the flash unless you look carefully at the small dialog in the upper left corner of the s3 screen during the update.
hi, what im trying to do is use odin to install root66 jb rom but before i do that i am running aokp 4.1.2 . do i first need to wipe phone before i use odin to flash rom or is it ok to just go head and install with odin? what i mean by wipeing phone is to wipe data /factory reset wipe cash wipe dav format system and what ever else there is in cwm to do. im just not sure havent done this before so some help would great.. thanks
ralphie1267 said:
hi, what im trying to do is use odin to install root66 jb rom but before i do that i am running aokp 4.1.2 . do i first need to wipe phone before i use odin to flash rom or is it ok to just go head and install with odin? what i mean by wipeing phone is to wipe data /factory reset wipe cash wipe dav format system and what ever else there is in cwm to do. im just not sure havent done this before so some help would great.. thanks
Click to expand...
Click to collapse
You'll need to do that wipe sooner or later (otherwise the stock ROM will fail to boot); you can either do it now or wait until after you've done the flash and use the stock recovery to do the wipe. I'd consider doing the wipe first to be easier.
Actually what I'm having issues with is Kies itself. I used a separate computer so that I could download Kies new but it's also a problem. Is there an easier way?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
GrapePopRocks said:
Actually what I'm having issues with is Kies itself. I used a separate computer so that I could download Kies new but it's also a problem. Is there an easier way?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Are you using the kies version from the support page on Samsung.com for YOUR phone? If you're trying to use kies instead of a mini version for a US phone, that hasn't worked for any of the other Galaxy line phones (at least in my experience).
Sent from my SGH-I747 using xda app-developers app
I don't know if this qualifies as easier (it would for me), but if Kies isn't working for you for whatever reason, you might try just using Odin directly. You can get Odin itself over in this thread, and completely stock images over in this thread; if you want the latest AT&T build, that would be this one.
(If you're slightly more ambitious, you could also try the rooted-but-otherwise-stock images found here, as a gateway to future customisation, but that's entirely up to you...)
Yes it's Kies from the support page. I will try with Odin directly see how that goes. If not I will be back LOL
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
To put it kindly, Kies is a steaming pile of cr4p. To be honest, upgrading via Odin with the official ROM is the best way to go. I spent days trying to get my phone to connect to Kies and it was a mess. I went to the AT&T store and they told me that there wasn't anything that they can do, this is an open issue. It works for some people, not others.
Finally I downloaded Kies on my wife's Mac and it worked. So maybe try a Mac?
My sister has a Mac I will try that
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] Need help ASAP! :c

Hello all, My name is Zach. I've been around XDA for a while, but haven't really posted anything, I thanked devs for work and have been flashing my phone for a while now. Well, last night, I was exhausted, and shouldn't have done what I did. I flashed the full "CODE_SPH-D710.GA10_818252_REV00_user_low_ship.tar.md5" to my phone via mobile odin from an ics rom (Phantoms ff18 I believe). Everything was going fine until the phone just shut off, and it booted straight into recovery mode.
Well now my phone will not boot, and I have no access to my external memory card via CWM-based Recovery v5.0.2.3 that was installed from the tar. All of my roms are on my external.
Every time I plug it into the computer I get "USB device is not recognized" and it installs an "Unknown Device" driver from windows. So I can not mount it in CWM to send the files to internal.
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?
I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium
evo3d6 said:
I would try redownloading drivers on a diffrent computer if possible and make sure you have original cord. You can also try to wipe data via stock recovery and try to boot again just some quick thoughts also could try to find one of the one clicks and pull cord out and put back in once you open the one click (not during the one click) and see if it will show then start the one click also make sure you have the correct drivers install if you go to sextapes site they have everything you need. Hope it turns out ok:beer:
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I have tried both my laptops, original cord, multiple other cords, have tried wiping in the CWM to nothing new, I do have the correct drivers and have tried multiple versions of them :/
Opening a one click and plugging the phone in just gives me "USB device not recognized"
Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium
Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app
evo3d6 said:
Im a little confused you have cwm?
Reading your post cwm does not come with the leaked build you have to flash agats recovery after. So im going to assume that your talking stock recovery.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Maybe it stuck from phantom's ff18 rom? But yes CWM-based recovery 5.0.2.3
If I could get it to recognize my external SD card then I can flash a rom.
chris-allen said:
Sad to say it sounds like you 1/2 way between soft bricked and hard bricked...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I hope its fixable :/
Get a Micro SD USB adapter. You can transfer the files with that.
Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.
ZachZombify said:
I have tried removing all drivers and kies, restarting, reinstalling, then plugging my phone back in about 1000 times now.
Now some good news, I can get into Odin mode, but odin does not recognize it due to the problem above^
My question is, is there still hope? and can anyone help me?
Click to expand...
Click to collapse
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.
graydiggy said:
Get a Micro SD USB adapter. You can transfer the files with that.
Click to expand...
Click to collapse
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
caaznkid said:
Well. If your phone still turns on there's hope. After you plug it into your computer and it installs that unknown device or whatever go to control panel -> system -> device manager.
Right click on the unknown device, update driver, browse my computer for drivers, let me pick from list of drivers, then forcefully install the samsung driver through there and then try to odin a stock ICS tar http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Samsung Epic 4G Touch/FI27/Original TAR/.
After the you install the tar I would boot into recovery and wipe data and cache then reboot to make sure it's clean. Then after you're back to stock then you can root recovery whatever and try flashing JB again. I suggest using CWM and a zip file this time around though. Good luck.
Click to expand...
Click to collapse
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
Febby said:
I'm not sure what exactly happened but it sounds as if you are screwed if Odin doesn't recognize it at this point. It sounds like something went very wrong with the bootloader to me, maybe Mobiletech can help repair your device for $50 if all other advise fails.
http://mobiletechvideos.mybigcommerce.com or email at [email protected]
If they can't fix it they will refund you back your money.
Click to expand...
Click to collapse
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.
ZachZombify said:
I cannot access the external memory card from CWM, it says "No files found", if I could, I would have flashed a new rom already.
I tried this, there are like 20-30 different samsung drivers to pick from, I tried a few, getting "Error 10, the device could not be started" unplugged phone, plugged back in and just get "USB device not recognized"
I honestly wish I could spend that 50$, but I am going to college and jobless at the moment, so all my money goes to them.
Click to expand...
Click to collapse
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link
If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium
bigdaddy619 said:
Have you tried the drivers found here http://rwilco12.androidfilehost.com/LeakSite/?dir=Leaks/Misc Files
Delete all Sammy drivers from your laptop restart your laptop then install the drivers you get from the link
Click to expand...
Click to collapse
I tried this, but even after uninstalling the sammy drivers, some remains in the "update driver" thing. I'm still getting "USB device is unrecognized"
Tr0LL-$_$ said:
If that doesn't work then why don't you boot into the ROM, use mobile Odin and flash the modem and recovery you want t seperately(if you can)
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Read the original post , the phone does NOT boot into android, it stays on the splash screen, forever.
Is it possible to boot an android OS from my external memory card? I know you could do it on the NOOK Color
Any help at this point would be greatly appreciated.
ZachZombify said:
Any help at this point would be greatly appreciated.
Click to expand...
Click to collapse
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?
There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.
MoHoGalore said:
So, to recap:
You were on FF18 with custom recovery, went to flash the GA10 tar via MO, phone died during process, isn't recognized when phone is in Odin mode and connected to a pc, you can still get to recovery and download mode on the phone but can't flash because it's not recognized, removed/re installed
Correct?
Have you tried another pc? Have you tried another cable? Have you pulled the sd card out and tried reading that on a pc?
Click to expand...
Click to collapse
Id didn't die, it just turned off, and restarted straight into the recovery. I have tried 3, and 4 different cables, the SD cards reads in the computer but isn't showing up in the recovery, I get "No files found" and since I cant boot, I cant change the directory for the SD card.
PanchoPlanet said:
There is some sort of lesson to be learned here. :sly:
People pay attention.
Many can profit from the outcome of this thread. :thumbup:
Pp.
Transmitted from another galaxy with a Jellybean infused P-5113 full of Unicorn porn.
Click to expand...
Click to collapse
Yes, But hopefully my phone is revivable!
Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
MoHoGalore said:
Have you tried another pc?
And was it a full flash? You saw pass and it restarted?
:edit: Just saw your post about using both laptops.
What gets me, the flashing process and a restart and still you're left with the custom recovery. I'm interested in where the flash got to.. since the tar doesn't flash a custom recovery..
One thing to try - Put the phone in Odin mode, have it plugged into the laptop, then start odin. Try it backwards..
Which version of Odin are you using?
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
I've tried a few different versions, but I've been trying to use a one-click that way it will just install everything

USB only works to charge/triangle away doesn't work/ can't revert to stock.

I'm currently running task650's current ROM and ktoonz newest kernel . I'm unable to connect my phone to my PC via USB. I've tried 3 different USB cables including the original one that came with the phone. I'm trying to revert to stock to swap out phone, but I can't flash through Odin(cant restore stock recovery) and triangle away won't let me reset flash counter. I'm at a loss for ideas, I've been looking through the forums for days and I can't find anything . I've tried flashing different ROMs/kernels with no luck.
Sent from my SGH-I747 using xda premium
is USB debugging mode on? did you make a nandroid when you first rooted? that would contain the original firmware you were using before flashing anything. are you connecting to your PC after putting the phone in download mode or recovery mode? just covering all the bases, buddy.
Yes I've done all the above, however during a flash of cm10 i soft bricked somehow...and lost all data on my internal.. So I no longer have my original nandroid I'm not new to flashing at all and never imagined that would happen I've learned to expect the unexpected now.
Sent from my SGH-I747 using xda premium
Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock
-Psychosomatic- said:
Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock
Click to expand...
Click to collapse
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium
mtnichols04 said:
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
where are you getting the stock firmware tar from? have you tried a different source location?
xBeerdroiDx said:
where are you getting the stock firmware tar from? have you tried a different source location?
Click to expand...
Click to collapse
I've tried root66_Att_I747uckl3.tar.md5
Only ROM I've tried. I'll try another. I've tried the Samsung toolkit and it doesn't work properly cause I'm not getting proper connection. I have a theory that my USB doesn't work properly because my file directories are messed up on phone and are in a folder emulated/0/...
Sent from my SGH-I747 using xda premium
here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.
xBeerdroiDx said:
here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.
Click to expand...
Click to collapse
thats where I downloaded from before, Everytime I get into Odin it gets stuck on Getting PIT for mapping..........sits there, then fails. phone is in download mode, USB cord that came with phone. ive tried reinstalling USB drivers a million times.
have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.
xBeerdroiDx said:
have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.
Click to expand...
Click to collapse
Tried mobile Odin, it soft bricked my phone, had to plug in to a full charge before I could even get it back into recovery. The first 24 hours it wouldn't even go back into download or recovery... I thought I was going to have to get a new phone. Weirdest thing ever. Downloaded and tried a new stock firmware. I feel like I'm running out of options.. Lol and every time I triangle away I reboot and my triangle is back..lol
Sent from my SGH-I747 using xda premium
Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.
USB Cord matters...
AverageCanadian said:
Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.
Click to expand...
Click to collapse
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.
thegodsquirrel said:
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.
Click to expand...
Click to collapse
Yes, Ive tried every USB plug under the sun. My phone sometimes gets detected by my computer, and I can browse files but if I try to copy something from it, it freezes half way through, then becomes undetechable. Ive tried to flash through odin but it never works....just get stuck then fails.

Odin Fails to flash my device

Hi Everyone, I actually have a SGH-I317m (Rogers Note 2), but thought I would post here since this gets more traffic.
I have been having constant problems with Odin trying to flash files to my Note 2.
Currently using the factory Samsung USB cable, disconnecting any other USB devices connected (BT gamepad) to my computer, and being sure to run Odin as "Administrator" in Windows 7 (64bit).
I've used the recommended Odin 1.85 as well as the latest Odin 3.x, with the newest release being somewhat more reliable.
Basically I've grown too paranoid to try and flash custom roms, and even the root package to my phone in fear of a permanent soft brick. KIES failed to update my phone to stock 4.3, so I then used Odin to flash it. I recently tried to flash a root package, which failed every time, then my stock image, which failed about 14 out of 15 tries. Once the Stock ROM flashed successfully, I breathed a sigh of relief and gave up.
Is there something specific that could be causing Odin to fail so consistantly? My phone is stock 4.3,recovery, unrooted, with locked bootloader and SIM.
I've seen recommendations that a Factory Reset be performed after flashing a new ROM, which I have not done. What is the logic behind this?
I'd be willing to try, but without root (aka without Titanium BackUp) a Wipe is not ideal. That being said, if I put all these flashing issues behind me, I'd happily give it a try.
I am curious to try Mobile Odin as well, which of course requires root.
The fact that both Odin and Kies failed to flash my device is curious. I'd like some suggestions on how to proceed.
I'd be happy not flashing custom ROMs, however I do feel that root access is a requirement for my usage.
Anyone?
Sent from my SGH-I317M using xda app-developers app
what root package did you use?
The one found in http://forum.xda-developers.com/showthread.php?t=2004650this thread, which is for my device.
Sent from my SGH-I317M using xda app-developers app
search for newest samsung mobile usb driver... make sure its the latest one and download it
uninstall the good for nothing kies software... reboot your pc and install the samsung mobile usb driver.
then connect your device and let windows reinstall the driver....
then try odin again.
Thanks. I ditched Kies once it failed to flash my device, then failed to recover it.
I will try reinstalling the driver. The one I have installed likely came from the "Galaxy Note 2 Toolkit", which hasn't been updated awhile.
I will try and report back.
Sent from my SGH-I317M using xda app-developers app
Interesting. Samsung's Canadian site does not have USB drivers, and the US version doesn't include my model... I will keep digging.
Sent from my SGH-I317M using xda app-developers app
Ok, I've resolved my issues and will post here for others should they have the same. My issue was caused by usb drivers. Uninstall Kies, and any Samsung drivers you may have installed. Reboot your pc, and install the latest Samsung drivers from here, for your device.
http://m.samsung.com/us/support/owners/product/SGH-I317TSAATT
After, plug in your phone, and let Windows install what it needs. Then proceed with Odin as normal.
Thanks to everyone for their help.
Sent from my SGH-I317M using xda app-developers app

Categories

Resources