Removed.
Do it yourselves.
Tutorial
Better Snag Post #2 While I Still Can!
Nice!
Good to have choices, especially bleeding edge up to date stuff.
Thanks.
if Chrome says its Malicious... like Jubakuba says in the post below its not! TYVM! for the kick a*s rom.
I assure you chrome is wrong...
Not that it's any "proof" but
<-----
I've put quite a bit of time into this site.
And I love AOKP.
If my intentions were malicious it would all go to waste, obviously.
So far Its running great, very nice work! *had to flash a kernel to get it to boot
Jubakuba, pm sent.
12
Just a bump...and a reminder that this exists
Oh, and Build 2 mods have been out since release...
Yay!
Git being down kept builds from being made.
And it coming up yesterday right when I was heading to class didn't help.
To make up for it...
I picked a BUNCH of cherries.
Some had to be rebased... but it seems I've done everything correctly in my testing on grouper.
Mods MIGHT not make it in.
My PC is slooowwww. And I have class.
Grouper up now.
Toro and Maguro sometime soon (a few hours).
TORO and MAGURO UP!
And I'll go ahead and make the mods...I think I have time to finish Maguro up too.
Mods soon.
Dual Panel at any DPI is pretty dope!
Even looks nice on TORO.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't care...I'm bumping this again.
To the ToroPlus testers that I sent the 9/24 build to...thank you for testing!
Your mods (center lock and no nav...please read OP for info since ya'll are new) are up.
As are the official Build 3 mods.
Jubakuba said:
I don't care...I'm bumping this again.
To the ToroPlus testers that I sent the 9/24 build to...thank you for testing!
Your mods (center lock and no nav...please read OP for info since ya'll are new) are up.
As are the official Build 3 mods.
Click to expand...
Click to collapse
AOKP_Build_3_MAGURO_CenterLock.zip
Boot Loop
jackpham said:
AOKP_Build_3_MAGURO_CenterLock.zip
Boot Loop
Click to expand...
Click to collapse
Are you running the official build 3?
And did you boot up once before applying?
Can anyone else confirm?
I'm not at home to decompile it and make sure everything is correct but I'm fairly certain it should be OK...been doing these for a while now.
Unless I just derped somewhere ..
Jubakuba said:
Are you running the official build 3?
And did you boot up once before applying?
Can anyone else confirm?
I'm not at home to decompile it and make sure everything is correct but I'm fairly certain it should be OK...been doing these for a while now.
Unless I just derped somewhere ..
Click to expand...
Click to collapse
Yes, I running the official build 3 for marugo
Download here
http://androtransfer.com/?developer=AOKP&folder=maguro
My phone boot up once boot loop immediately!
jackpham said:
Yes, I running the official build 3 for marugo
Download here
http://androtransfer.com/?developer=AOKP&folder=maguro
My phone boot up once boot loop immediately!
Click to expand...
Click to collapse
Just had a user confirm it's working for him on Maguro.
So you flashed the ROM...and booted up.
Then you reboot recovery and flash the mod? It might take a few extra seconds to boot the first time but it should without issue.
Jubakuba said:
Just had a user confirm it's working for him on Maguro.
So you flashed the ROM...and booted up.
Then you reboot recovery and flash the mod? It might take a few extra seconds to boot the first time but it should without issue.
Click to expand...
Click to collapse
He can capture a screen shot confirm it's working on Maguro!
jackpham said:
He can capture a screen shot confirm it's working on Maguro!
Click to expand...
Click to collapse
Without answering my questions I can't help, man...
Process:
Install build 3.
Boot up.
Reboot recovery.
Install mod.
Don't wipe anything. Boot up again.
The only reason I outline this is I thought I was boot looping myself once so I reflashed after booting up from then on.
Jubakuba said:
Without answering my questions I can't help, man...
Process:
Install build 3.
Boot up.
Reboot recovery.
Install mod.
Don't wipe anything. Boot up again.
The only reason I outline this is I thought I was boot looping myself once so I reflashed after booting up from then on.
Click to expand...
Click to collapse
Continued to boot loop for marugo
Perfect!
Flashed without wipe on AOKP JB Build 3....works perfectly.
(although i prefer the centered clock to be a tad lower)
GREAT JOB!
tribaleps said:
Flashed without wipe on AOKP JB Build 3....works perfectly.
(although i prefer the centered clock to be a tad lower)
GREAT JOB!
Click to expand...
Click to collapse
Maguro, correct?
Awesome. Thanks!
<-----I iz not complete newbz.
Jubakuba said:
Maguro, correct?
Awesome. Thanks!
<-----I iz not complete newbz.
Click to expand...
Click to collapse
Sure not Maguro!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will be building every three daysfor Maguro, Toro and Toroplus. Because both PA's and CM's developers add awesome new functions everyday, and who doesn't want to be the first one to use them?
CWM: YOU NEED TO FULLWIPE IF YOU WERE USING ANOTHER ROM BEFORE
CWM: Install Zip:
pa_maguro-2.55-20121124-124741-Utacka.zip - 152.78 MB
pa_toro-2.55-20121124-133023-Utacka.zip - 159.19 MB
pa_toroplus-2.55-20121124-141924-Utacka.zip - 159.16 MB
CWM: Install Gapps: gapps-jb-20121011-signed.zip - 88.41 MB
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot and edit your Apps Dpi & Layout under Settings/Paranoid Settings
go rocking
go rock!
yes!
Good Job
thank you for this:good:
Whaa-hoo!!! Thank ye kindly, sir!
Thank you! I can't wait to try this out. Was waiting for an update before switching from cm10. Nandroid gong on now!
So says Latinmaxima, so it shall be done!
navbar customization?
killersloth said:
navbar customization?
Click to expand...
Click to collapse
Only on phone / phablet mode for now. Built from the latest sources.
so which gapps would anyone recommend to flash with this rom?
nyjohn said:
so which gapps would anyone recommend to flash with this rom?
Click to expand...
Click to collapse
Depends. You want Picasa sync or CM camera features? Me, I've opted for camera and am using the 7/26 Gapps.
Sucks if you're stopping the dropbox, it would of been an instant way to know a new update is out, at least from a PC. Still (mostly) any method of getting PA is good enough for me.
Good to see this here! Thanks again!
Removed by request
btux81 said:
My mirror
pa_toroplus-2.13-17SEP2012-183430.zip
Click to expand...
Click to collapse
Please don't mirror, I can't track those downloads. What's wrong with devhost anyway?
gangsterjoop said:
Please don't mirror, I can't track those downloads. What's wrong with devhost anyway?
Click to expand...
Click to collapse
I removed the links. I am not aware of devhost having a problem but thought I'd share my unused bandwidth. It's also good in case devhost does go offline. If you ever change your mind I'd be happy to mirror files for you
How are dirty flashes going? I usually just wipe system, but I'm feeling lazy. I am running the 9-15 nightly.
slow88lx said:
How are dirty flashes going? I usually just wipe system, but I'm feeling lazy. I am running the 9-15 nightly.
Click to expand...
Click to collapse
Dirty flash running smooth here! A few new goodies in this build too!
Jays2Kings said:
Sucks if you're stopping the dropbox, it would of been an instant way to know a new update is out, at least from a PC. Still (mostly) any method of getting PA is good enough for me.
Click to expand...
Click to collapse
I would have to upload twice, if I can write a script to do this completely automatically I might resume Dropbox. But for now it will be only devhost because Dropbox is too much of a hassle.
Ah Man,Don't Do that ! Don't Stop Sharing on Dropbox !!! You were doing a great job !!
So I downloaded and installed last night. First let me say thank you!
While it may not seem like much, Blackboard Learn works on this ROM on toroplus, something that was lacking still in CM10. I am still adjusting to the hybrid features and really love what options this gives. Sorting through the custom settings for individual apps is taking some adjusting to but that is with any new ROM. It takes some adjustment.
I have had one instance where I changed the DPI on an app. Email and it asked to reboot. The phone was charging and failed to reboot. I had to pull the battery. I couldn't replicate this issue but I did feel like some feedback should be documented in case someone else experiences this.
I flashed as a clean install after a nandroid of CM10 and then wiped everything.
Thanks again!
Anyone having problems with gmail under the latest sept 17th toro build? It crashes for me no matter what settings I change in paranoid settings. I was able to change settings in previous builds and get Gmail to work...
Sent from my Nexus 7 using Tapatalk 2
Hello everyone, I thought we could start some Ubuntu Touch porting so wanted to share thoughts, ideas, development and maybe do this as a community work. I'm currently preparing everything (slow adsl) and trying to figure out which are the steps to be followed
It's not very difficult according to: https://wiki.ubuntu.com/Touch/Porting
But we've a first problem, the porting requires the use of CM10.1 repos and cm10.1 for our device is a bit of a dream atm, better, there's the repo but no nightly at all. Would we be able or would it be worth to try to use one of the cm10.1 porting available for the hox or we must wait for an official nightly?
I think I should give a try, but I don't really want to waste my time so I may be missing something important which absolutely requires the official repos.
Ideas?
P.s sorry if this isn't the most appropriate section, tell me and even move the thread if necessary, but I'd prefer to stay away from "nice thanks", "fantastic" and so posts, they make no sense now since it's too soon and just distract.
Can't we use tbalden's kernel and device trees? It's as official as it gets.
TToivanen said:
Can't we use tbalden's kernel and device trees? It's as official as it gets.
Click to expand...
Click to collapse
You mean this https://github.com/cyanogenmod/android_device_htc_endeavoru? I haven't followed cm10.1 porting and development very much so it's pretty much what I was asking, when compiling a rom starting from this repo, will it work?
virtualflyer said:
You mean this https://github.com/cyanogenmod/android_device_htc_endeavoru? I haven't followed cm10.1 porting and development very much so it's pretty much what I was asking, when compiling a rom starting from this repo, will it work?
Click to expand...
Click to collapse
The builds from that repo have all been really solid. I guess it'll serve as a base.
Thanks, will start from it tomorrow, it's midnight here and still waiting for the download to finish...
Moved to Q&A
Nevermind this post.
I'm trying to port it too but download is really slow. We have CM10.1 for our device. but i think it's juste usefull to boot.
Keep following your work too.
I've synced 3 hrs now and only have fetched 2Gb. They should probably invest in some servers.
lol... my download crashed during the night... now i'm at 88% for phablet.. and waiting also for CM10.1...
Edit: My download crashed again at 15.45 pm...... i'll become crazy...
Call to all:
I've finished the actual porting process. Now I have to iron out compiling errors. Hopefully I'll be able to boot soon!
TToivanen said:
Call to all:
I've finished the actual porting process. Now I have to iron out compiling errors. Hopefully I'll be able to boot soon!
Click to expand...
Click to collapse
Exciting news! I'm waiting for it
can you put your progress in Ubuntu's site like Lloir did? it'd be more official and i can be a tester =)
Compiled!! We'll see how it boots....
TToivanen said:
Compiled!! We'll see how it boots....
Click to expand...
Click to collapse
Please report ASAP, we're dying to hear the outcome
Sent from my HTC One X using xda app-developers app
Well, as expected, the build failed to boot. Back to the drawing table.
EDIT: utopykzebulon will build soon with my patches. Hopefully he comes up with something.
TToivanen said:
Well, as expected, the build failed to boot. Back to the drawing table.
EDIT: utopykzebulon will build soon with my patches. Hopefully he comes up with something.
Click to expand...
Click to collapse
yes but ATM it's impossible to have the complete repo...
tell you the WIP as soon it's possible....
Built 2nd and 3rd time, not booting.
Debugging is extremely difficult because logcat seems to be broken.
Anyways here's a last_kmsg if somebody has time to look into it: http://pastebin.com/FyPR58c3
Seems like we're falling behind - Desire Bravo has a booting image already lol!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shiftone said:
Seems like we're falling behind - Desire Bravo has a booting image already lol!
Click to expand...
Click to collapse
Looks little bit strange
All subsequent builds and any issues will be posted on this thread only! http://forum.xda-developers.com/showthread.php?t=2383143
Good work! Thanks RIPng!
Bugs experienced so far:
Trebuchet will FC randomly
Phone speaker will crackle with some notification sounds/music
Report back:
-Seems to be running great. I've had it running around 8 hours so far. No recent FC's.
-Volume +/- works great when setting to skip tracks for music apps when screen is off.
-Homescreen padding actually makes sense. (more room)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Homescreen)
(Focal Camera)
(About)
CM 10.2 MMS with "Quick reply" and the Focal camera:
Flash in recovery:
DOWNLOAD FLASHABLE ZIP HERE
Always use at your own risk!
Looking forward to flashing this. This a working link to the 20130726-gapps
http://usprobam.no-ip.org/gapps-jb-20130726.zip
ksujace said:
Looking forward to flashing this. This a working link to the 20130726-gapps
http://usprobam.no-ip.org/gapps-jb-20130726.zip
Click to expand...
Click to collapse
I have the gapps in the OP, but I will add this link as well for convenience
It is live! https://mega.co.nz/#!OYR3TSoY!bu771DsU5VKJpNWiDKQnbQIsXPEO0KwPxV7D2E8epns
I am very interested in testing this ROM. One of the only reasons I haven't switched to CM or 4.3 is because I can't let go of the stock camera features.
zeyoner said:
I am very interested in testing this ROM. One of the only reasons I haven't switched to CM or 4.3 is because I can't let go of the stock camera features.
Click to expand...
Click to collapse
The Focal camera will be amazing, so I suggest you try it!
Already downloaded it doing a nandroid as I'm posting. Mega has some real nice downstream. :victory:
zeyoner said:
Already downloaded it doing a nandroid as I'm posting. Mega has some real nice downstream. :victory:
Click to expand...
Click to collapse
Mega is wonderful for downloading I upload at nearly the maximum throughput of my line as well.
zeyoner said:
I am very interested in testing this ROM. One of the only reasons I haven't switched to CM or 4.3 is because I can't let go of the stock camera features.
Click to expand...
Click to collapse
I personally felt the same way but after trying 4.3 cam I had a change of heart. I don't find myself using all the features and one reason is because I find the tw cam very laggy and awful with low light setting. 4.3 is just faster and more straight forward for that quick point and shoot and still great quality.
I337
Does this auto loki and have super user and root already done?
Thanks again!
idle0095 said:
Does this auto loki and have super user and root already done?
Click to expand...
Click to collapse
I don't think it has loki and it has the root files, you just need to use the SuperSU update zip to update the binaries
Okay so I would have to use the loki patch to flash then. Ill wait until the official one is updated to cm10.2
idle0095 said:
Okay so I would have to use the loki patch to flash then. Ill wait until the official one is updated to cm10.2
Click to expand...
Click to collapse
Or you just flash the loki KT kernel, it works quite well with CM
RIPng said:
Or you just flash the loki KT kernel, it works quite well with CM
Click to expand...
Click to collapse
Whats the difference between this one http://forum.xda-developers.com/showthread.php?t=2383143 and the one here??
idle0095 said:
Whats the difference between this one http://forum.xda-developers.com/showthread.php?t=2383143 and the one here??
Click to expand...
Click to collapse
Those are my builds as well, I build the JFLTECAN/JFLTEATT/JFLTEXX
Here is the camera for people to test out before switching from TouchWiz (if you're still deciding). DOWNLOAD FOCAL
EDIT: Reportedly works on various 4.2.2 and 4.3 builds.
Did a clean install and I had no APN's. It wouldn't allow me to add one either. Also tried KT kernel and it booted upon first boot with no boot animation but when I rebooted, it stayed on the black screen. Anyone else have these issues?
Sent from my SGH-I337 using xda premium
Jah0n said:
Here is the camera for people to test out before switching from TouchWiz (if you're still deciding). DOWNLOAD FOCAL
EDIT: I haven't tested to see if it would function in anything other than CM 10.2 yet.
Click to expand...
Click to collapse
anybody on 4.2.2 try this apk out yet? may give it a shot later this evening when i have time. cheers
In Rom Manager Premium I see very first official build of CM10.2, build is dated 10.2 20130814 and build number is 38010. Can anyone confirm this ?
Thanks !
CM section is now visible under rom manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
first build
changelog
russiandivxclub said:
In Rom Manager Premium I see very first official build of CM10.2, build is dated 10.2 20130814 and build number is 38010. Can anyone confirm this ?
Thanks !
Click to expand...
Click to collapse
Yes
http://download.cyanogenmod.com/?device=flo&type=
YAY !
Here we GO Gentleman !
You know we can take screenshots now right?
aooga said:
You know we can take screenshots now right?
Click to expand...
Click to collapse
Hold power and volume down button. Its much easier than taking pics with your camera. :thumbup:
hold onto your seats!
russiandivxclub said:
In Rom Manager Premium I see very first official build of CM10.2, build is dated 10.2 20130814 and build number is 38010. Can anyone confirm this ?
Thanks !
Click to expand...
Click to collapse
Yes 100% and I have 2 building right now, 1 will complete, the second might not complete as im building with linaro. Will post the offical cm10.2 nighly tonight in the forums
flashed it and running fine. Few things are fixed that the unofficial build had issues with.
Anyone have touchscreen problems before flashing it? Like the multitouch issues being reported? How are the problems after flashing?
I would like to know the bug/issue list first before installing =]
macaumen said:
I would like to know the bug/issue list first before installing =]
Click to expand...
Click to collapse
As with all opensource projects, that is a bit of a loaded question. If you really wanna know, there is always
https://jira.cyanogenmod.org/secure/Dashboard.jspa
...or you could just flash it and try for yourself
uprightbass360 said:
As with all opensource projects, that is a bit of a loaded question. If you really wanna know, there is always
https://jira.cyanogenmod.org/secure/Dashboard.jspa
...or you could just flash it and try for yourself
Click to expand...
Click to collapse
No specific bug/issue list for our FLO?
dirtyfingers said:
Hold power and volume down button. Its much easier than taking pics with your camera. :thumbup:
Click to expand...
Click to collapse
Absolutely guys, for some reason didn't work for me. I also tried on my i337 CM10.1 it didn't work as well , wtf ? Now really hold power right ? It's both at same time ? I mean I tried all kind of combinations ...don't work :|
Anyhow, how is new CM10.2 and how come no official thread yet ?
russiandivxclub said:
Absolutely guys, for some reason didn't work for me. I also tried on my i337 CM10.1 it didn't work as well , wtf ? Now really hold power right ? It's both at same time ? I mean I tried all kind of combinations ...don't work :|
Anyhow, how is new CM10.2 and how come no official thread yet ?
Click to expand...
Click to collapse
both at the same time.... and keep hold of them, after a couple of seconds or so you will hear the shutter noise and see the notification in the top left about the screenshot
Very stable ROM. I haven't come across any issues other than the screen not adjusting properly when switching to Extended Desktop.
Multi-Touch issues still persist. I haven't confirmed this yet, but it seems I'm not getting Hangouts notifications. I will confirm this later.
---------------------------------------------------------------------------------
CyanogenMod12 for the XT907
---------------------------------------------------------------------------------
SOURCES:
> https://github.com/dhacker29?tab=repositories
> https://github.com/CyanogenMod/
CHANGELOG: (MASTER)
> http://www.cmxlog.com/12/xt907/
---------------------------------------------------------------------------------
DOWNLOADS
---------------------------------------------------------------------------------
CM12 Thread:
> http://forum.xda-developers.com/droid-razr-m/development/rom-cyanogenmod-12-t2994972
---------------------------------------------------------------------------------
SCREENSHOT
---------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow
Thanks for sharing
Odesláno z mého XT907 pomocí Tapatalk
Can't wait to see the finished product!!!
Seriously...? And what bootloader is supported?
Dr. Mario said:
Seriously...? And what bootloader is supported?
Click to expand...
Click to collapse
The 3.4 kernel indicates KKBL, but I don't know if anyone is or will be working on a JBBL version.
Ouch... Still it's possible to get Linux v. 3.4 kernel to work with Jelly Beans bootloader, just takes a bit work in figuring out how to make it work. I didn't like Kit Kat bootloader, too much problems.
Dr. Mario said:
Ouch... Still it's possible to get Linux v. 3.4 kernel to work with Jelly Beans bootloader, just takes a bit work in figuring out how to make it work. I didn't like Kit Kat bootloader, too much problems.
Click to expand...
Click to collapse
You have to realize people are probably going to stop supporting JB at some point.
Sent from my HTC6525LVW using Tapatalk
Well, still. I was put off by the Kit Kat bugs, and I wouldn't want it to happen again, I had to replace the battery due to slow thermal damage (the phone obviously ran too hot - I noticed the damage was already done by the time I downgraded my RAZR M back to Jelly Beans in order to run cooler, I tried calibrating it, the runtime nosedove).
https://twitter.com/dhacker29/status/533142687873265664
Looks like at least a test version of CM12 is out
seasonone said:
https://twitter.com/dhacker29/status/533142687873265664
Looks like at least a test version of CM12 is out
Click to expand...
Click to collapse
Yeah its over here no idea if it boots if it will flash or what gapps to use... flash at your own risk
Edit... Maybe these Gapps
We cannot teach people anything; we can only help them discover it within themselves.
So I've downloaded it and flashed it, while flashing it returned an error with mounting something regarding msm8960 in /data but in the end it said that flashing is done. The ROM doesn't boot on my phone, it's possible that I did something wrong I was in school when I tried it.
Shefczenko said:
So I've downloaded it and flashed it, while flashing it returned an error with mounting something regarding msm8960 in /data but in the end it said that flashing is done. The ROM doesn't boot on my phone, it's possible that I did something wrong I was in school when I tried it.
Click to expand...
Click to collapse
How long did you wait for it to boot? I know when I flashed Lollipop on my Galaxy Nexus, it took forever..... to boot.
EDIT:
On CM12 Test build the sim card doesn't work. Nevermind got working. I wiped everything + formatted data, then I pulled my sim then re-inserted it.
ATTACK said:
How long did you wait for it to boot? I know when I flashed Lollipop on my Galaxy Nexus, it took forever..... to boot.
EDIT:
On CM12 Test build the sim card doesn't work. Nevermind got working. I wiped everything + formatted data, then I pulled my sim then re-inserted it.
Click to expand...
Click to collapse
Thanks Attack. Care to comment on what works and what does not?
ATTACK said:
How long did you wait for it to boot? I know when I flashed Lollipop on my Galaxy Nexus, it took forever..... to boot.
EDIT:
On CM12 Test build the sim card doesn't work. Nevermind got working. I wiped everything + formatted data, then I pulled my sim then re-inserted it.
Click to expand...
Click to collapse
About 15 minutes, guess that wasn't long enough. Gonna test it again later in the evening and I wíll report back on how it went.
jdb3654 said:
Thanks Attack. Care to comment on what works and what does not?
Click to expand...
Click to collapse
So far, everything seems to work. WiFi, Data, Sms (idk Mms) and GPS (after mfastbooting these commands)
Code:
mfastboot erase modemst1
mfastboot erase modemst2
Shefczenko said:
About 15 minutes, guess that wasn't long enough. Gonna test it again later in the evening and I wíll report back on how it went.
Click to expand...
Click to collapse
Yeah... 15 mins. is a bit to long, but you should see around 2 - 5 mins on first boot.
Agreeable. 15 minutes are a tad too long.... ART typically take a good while recompiling the apps on the first boot but I am surprised that it took so long.
Anyways, know of any good Kit Kat ROM that doesn't have overheating problems? I might flash the bootloader and jump to Lollipop at some point.
'Kay, so I've downloaded the files again, installed it and the system came up right away (~3 minutes) so I have no idea what I did wrong in the morning. Nevermind that the system is working perfectly, smooth, fast and fully working. I actually didn't though that first build will be daily driver quality, the only thing I noticed is bit buggy animation when closing apps but that is minor thing. I will test battery life tomorrow.
Only problems I've seen so far is the video on YouTube doesn't work and the compass icon won't go away at least for me but it looks like it could a dd.
I just installed lp, first impressions are good everything seem to work and is mostly smooth and snappy.