Develop Bugs

[GUIDE] Huawei Ascend Y300 IMEI Hack & Firmware update

WARNING: I WILL NOT BE RESPONSIBLE OF ANY FAULT THAT MAY OCCUR TO YOUR DEVICE. YOU`RE DOING THIS AT YOUR OWN RISK.
Okay so after you`ve accepted taking the risk, let`s start...​
So,i was spending alot of time trying to make The "OEMINFO-Hack-Tool-v1" to work, I discovered a Simple And way safer procedure...
MAKE SURE YOUR DEVICE IS ROOTED!( Or it won`t work )​
1. Download The App ( 5iromtoolbox ) in the attachment & install it in your rooted device...
NOTE: I recommend The "Kingo App" for rooting, its way quick and simple...
2. Click on IMEI backup...
3. After Its completion, connect your phone in MTP ( Media Transfer ) mode, browse to SDCARD
4. Copy the whole folder somewhere in your PC ( Backups are Always Important )...
5. Now, browse to SDCARD/5irom/imeibackup/ and click copy on the file "5.img"
6. Back to SDCARD ( root ), Create a folder named "OEMINFO-BACKUP" & paste "5.img" file in there...
7. Open Up "OEMINFO-Hack-Tool" folder & run "2-oeminfo-hack-windows"...( This time it should Be successful, if u had troubles...)
NOTE: If it says "ADB/Shell denied superuser access", Change your superuser App to SuperSU...
8. After completion, Copy the "Dload" folder of your firmware to the SDCARD & and Turn off your device...
9. Hold "Volume up + Volume Down", then hold the power button ( The Firmware Update process Will start )...
10. After Completion the device will Boot up, But!, Unrooted... ( If your dial *#06# you`ll notice a Blank IMEI )
11. To fix that, Root the Device ( Kingo App recommended) & install the "5iromtoolbox" app again...
12. Go to your "file manager" app and Copy the "5irom" folder to the "internal storage"...
13. Launch "5iromtoolbox" and restore your IMEI...
14. After Completion, RESTART! the device, ( It will do a Hard Reset )
15. After Reboot, Dial *#06#, this time the IMEI would be back to Original....
AND THATS ALMOST IT!
HIT THANKS IF THIS HELPED YOU.​

hello
after using your method i get stuck on blue screen and the phone wont boot into recovery or fastboot, so i tried flashing the original rom trough download mode but it gets stuck on around 50%, any ideas on how to fix it? i could really use some help here, my phones like this for about a month and i googled everything, nothing seems to work so far

androidnoob2212 said:
after using your method i get stuck on blue screen and the phone wont boot into recovery or fastboot, so i tried flashing the original rom trough download mode but it gets stuck on around 50%, any ideas on how to fix it? i could really use some help here, my phones like this for about a month and i googled everything, nothing seems to work so far
Click to expand...
Click to collapse
did you follow the procedures well?
was your phone rooted?
is it a Y300?
where were you in the steps until the error occured?
try to find ways to unbrick your device, because thats seems to be whats going on...
ps: I don`t really use the device no more, so it be pretty hard to help you with that.

ill probably send it to service but thanks
fastboot doesnt work, twrp is gone, only accesible mode is download mode
my phone is a rooted huawei y300(EU) with twrp recovery and a oficial rom, it failed after the step where i have to reboot, i can read the imei using dc unlock and its not 0 or my original imei, and i think that might be the issue, idk where i messed up, tried using dsf cdma tool but dont really know how to use it and the tutorials out there on the web dont work for me, anyways thanks for the reply
ps. i got a new one to but its a waste to just let it collect dust

not booting

I replaced build.prop and restarted. Then black screen and led lightning from color to color. I did factory hard reset to...
Something to do with it?maybe with a pc?
Thx!

Have your tried the methods described in this thread? http://forum.xda-developers.com/showthread.php?t=2799647

LG G3 Verizon Stuck on splash screen
sic0048 said:
Have your tried the methods described in this thread? http://forum.xda-developers.com/showthread.php?t=2799647
Click to expand...
Click to collapse
Can this work for the Verizon version VS985?
Im having the same Problem, I tried changing the Speaker volume levels with Root Explorer and now my phone will not boot from
the Verizon splash screen.
Any help would be great thanks.

This might be your only option... Without a proper build prop I believe the lg flash tool won't recognize the phone as any varient of the G3. Youre only choice might be to flash tot file thought fastboot itself. Only way to get to fastboot is as described in this thread
http://forum.xda-developers.com/showthread.php?p=54270708
Make sure to read up on this though. I'm not familiar with how lg doesn't allow booting into fastboot easily.
Sent from my LG-D850 using XDA Premium 4 mobile app

Ghost401 said:
Can this work for the Verizon version VS985?
Im having the same Problem, I tried changing the Speaker volume levels with Root Explorer and now my phone will not boot from
the Verizon splash screen.
Any help would be great thanks.
Click to expand...
Click to collapse
pull your battery... wait 15 seconds.... put it back in.
hold power button and down key at the same time until you see the lg splash screen, then let go for a second, and immediately hold the same two back bezel keys until you see "factory reset"... your phone will work afterwords but will be back to square one... its a shame, but its got to be done if you don't have a custom recovery.
Its also Possible to make an update.zip with just the build.prop in it. Copy it to sdk/platform-tools and then use adb to sideload the zip to replace the build.prop and fix your misinformed tinkering... if youre on the stock recovery you would probably need a signature on the zip for it to flash, which is troublesome.
what model is your G3?
if usb debugging is not enabled and your pc is not authorized... you are buggered (excuse the pun)

B4rnzEE said:
pull your battery... wait 15 seconds.... put it back in.
hold power button and down key at the same time until you see the lg splash screen, then let go for a second, and immediately hold the same two back bezel keys until you see "factory reset"... your phone will work afterwords but will be back to square one... its a shame, but its got to be done if you don't have a custom recovery.
Its also Possible to make an update.zip with just the build.prop in it. Copy it to sdk/platform-tools and then use adb to sideload the zip to replace the build.prop and fix your misinformed tinkering... if youre on the stock recovery you would probably need a signature on the zip for it to flash, which is troublesome.
what model is your G3?
if usb debugging is not enabled and your pc is not authorized... you are buggered (excuse the pun)
Click to expand...
Click to collapse
Thanks a lot bro,I have the Verizon VS985,
I do not mind starting from scratch as long as i can get my phone back up and running lol i will try the factory restore method. Hope this works.
:fingers-crossed:
---------- Post added at 03:13 PM ---------- Previous post was at 02:45 PM ----------
B4rnzEE said:
pull your battery... wait 15 seconds.... put it back in.
hold power button and down key at the same time until you see the lg splash screen, then let go for a second, and immediately hold the same two back bezel keys until you see "factory reset"... your phone will work afterwords but will be back to square one... its a shame, but its got to be done if you don't have a custom recovery.
Its also Possible to make an update.zip with just the build.prop in it. Copy it to sdk/platform-tools and then use adb to sideload the zip to replace the build.prop and fix your misinformed tinkering... if youre on the stock recovery you would probably need a signature on the zip for it to flash, which is troublesome.
what model is your G3?
if usb debugging is not enabled and your pc is not authorized... you are buggered (excuse the pun)
Click to expand...
Click to collapse
Thanks bro but that Did not work, The only option was turn off, safe mode, reset Factory Data, and power off.

Ghost401 said:
Thanks a lot bro,I have the Verizon VS985,
I do not mind starting from scratch as long as i can get my phone back up and running lol i will try the factory restore method. Hope this works.
:fingers-crossed:
---------- Post added at 03:13 PM ---------- Previous post was at 02:45 PM ----------
Thanks bro but that Did not work, The only option was turn off, safe mode, reset Factory Data, and power off.
Click to expand...
Click to collapse
Reset factory data

B4rnzEE said:
Reset factory data
Click to expand...
Click to collapse
I did and all it does is reboots and gets stuck at the Verizon splash screen..

Ghost401 said:
I did and all it does is reboots and gets stuck at the Verizon splash screen..
Click to expand...
Click to collapse
1) go to download mode
2) install this and download the correct .kdz file for your phone
-Modelnumber is ...
-serial number is your imei number
- wait until the download is done
3) run the lgflashtool2014.exe from this zip
-Select type= cdma
-phone mode= Diag
-reset time=33000
-Should be like this when You run it
-select kdz file= is where you need to find the kdz file you just downloaded(step 1)
-then press cse flash
-in the now pop-up window select start
-select your language
-ignore error (cannot connect to lg server)
-check progress on phone up to 100% then boots in recovery installs and restarts
-wait untill it goes to the welcom screen then you can unplug
-now the most inportant step Like my post
to enter download mode do this:
--You must switch off the device to start the process.
--Then press and hold the “Volume Up” and connect the USB cable from phone to PC.
--Use the original USB cable. Because, other device’s cable may not be detected in the Computer. So, only we recommend it to use the original-- one that you got it when you bought the phone.
--Wait for the driver installation on PC.
--Then you will get the download mode screen in your phone.
--That’s it.

suljo94 said:
I don't have the links to the tread where I got these from but lets just hope I don't get banned.
1) go to download mode
2) install this and download the correct .kdz file for your phone
-Modelnumber is ...
-serial number is your imei number
- wait until the download is done
3) run the lgflashtool2014.exe from this zip
-Select type= cdma
-phone mode= Diag
-reset time=33000
-Should be like this when You run it
-select kdz file= is where you need to find the kdz file you just downloaded(step 1)
-then press cse flash
-in the now pop-up window select start
-select your language
-ignore error (cannot connect to lg server)
-check progress on phone up to 100% then boots in recovery installs and restarts
-wait untill it goes to the welcom screen then you can unplug
-now the most inportant step Like my post
to enter download mode do this:
--You must switch off the device to start the process.
--Then press and hold the “Volume Up” and connect the USB cable from phone to PC.
--Use the original USB cable. Because, other device’s cable may not be detected in the Computer. So, only we recommend it to use the original-- one that you got it when you bought the phone.
--Wait for the driver installation on PC.
--Then you will get the download mode screen in your phone.
--That’s it.
Click to expand...
Click to collapse
Im Sorry but im an idiot man, I open the tool but there is no option to download anything.
I see a section for Version and open kdz. but not to DL anything, sucks! lol

Ghost401 said:
Im Sorry but im an idiot man, I open the tool but there is no option to download anything.
I see a section for Version and open kdz. but not to DL anything, sucks! lol
Click to expand...
Click to collapse
so typing in
VS985
(your imei)
pressing save doesn't work

suljo94 said:
so typing in
VS985
(your imei)
pressing save doesn't work
Click to expand...
Click to collapse
Thank you For your time and help bro, I was able to restore the firmware through a different tool and used the DLL + TOT files.
so far so good, setting now,
I'll make sure I flash a custom Recovery this time. lol

Ghost401 said:
Thank you For your time and help bro, I was able to restore the firmware through a different tool and used the DLL + TOT files.
so far so good, setting now,
I'll make sure I flash a custom Recovery this time. lol
Click to expand...
Click to collapse
you cant flash a recovery (bootloader is locked)
try rooting (IOroot)
then install this kind of recovery it doesn't replace you recovery but you can flash and backup(tru the app

suljo94 said:
you cant flash a recovery (bootloader is locked)
try rooting (IOroot)
then install kind of recovery it doesn't replace you recovery but you can flash and backup(tru the app
Click to expand...
Click to collapse
I suggest you remove that link asap.
Sent from G3

Tarzan- said:
I suggest you remove that link asap.
Sent from G3
Click to expand...
Click to collapse
done but why ?

suljo94 said:
done but why ?
Click to expand...
Click to collapse
I think you put the wrong link there because one of the files in your folder was a cracked apk, thought to give you a heads up

Tarzan- said:
I think you put the wrong link there because one of the files in your folder was a cracked apk, thought to give you a heads up
Click to expand...
Click to collapse
okee here is a fixed link
it is an app that boots into a cmw-like recovery

Bro,you saved my phone.Thank you so much.

[HELP] Unbrick Huawei GR3 (TANGO) - TAG-L23

Guys: I need your understanding, experience, patience and HEEELP!!!
The history:
2 months ago, I bought a new HUAWEI GR3 (TANGO) TAG-L23. Processor = MT6753T
I tried to root it using KingoRoot. I Messed it up... Got a soft-brick: splash screen boot loop. At that moment, I still had access to Fastboot and Recovery mode (stock recovery).
After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3.
I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm.
Tired of searching a stock/custom firmware for GR3 TAG-L23, I decided to download and flash a GR3 TAG-L22 rom using TWRP.
Result = Messed it up again... this time worst... Hard-bricked I think: the phone didn't show any light, couldn't boot it again in any mode... Dead...
The only hope I had is that it is detected by Windows for about 10 seconds as MEDIATEK USB PORT (COMxx) where xx changes when I connect it from one USB port to another.
Since then, I tried almost every tutorial/video/solution/forum/website over the internet, tried almost every SP Flash tool version from v3.1224 to v5.1628, downloaded every scatter.txt for MT6753 processor, tried changing with/without battery option in SPFT, pressing every phone buttons combos, with no luck...
I always get the same error: S_FT_ENABLE_DRAM_FAIL (0xFC0)
Downloaded and installed almost every driver I found on internet: not overwritting them... I created a Virtual Machine, and test them separately using snapshots. Result = Same DRAM_FAIL error.
last week, got another HUAWEI GR3 TAG-L23, untouched, brand new...
I did the following with the new one:
Flashed TWRP recovery using fastboot commands = OK
Rooted it using SuperSU = OK
executed tons of ADB commands that found over the internet, to dump the partition table and stock rom using dd command = OK (I think... what I got is a bunch of files - system, lk, boot, logo, cache, frp, userdata, secro, recovery, nvdata, protect1 and 2, tee1 and 2, and so on).
Using the partition table information, edited one scatter.txt file for MT6753 and, one by one, adjusted the partition info (start and lenght). I did it because when using any downloaded scatter file, and selecting the files that I got from dd commands, SPFT showed error messages saying them were wrong. After editing it and loading the files that I got from the second phone, SPFT recognized them as good ones.
But.... I'm still getting the d...mn S_FT_ENABLE_DRAM_FAIL (0xFC0) error
Also tried to get a rom backup and scatter file from the second phone using MTK DROID ROOT & TOOLS v2.5.3 with no luck: it shows all phone information (except IMEIs), a green rectangle shows up, but... a weird message appears at right: "ERROR: TotalBytesPerChunk Not Found. Set Default Page/Spare=2048/64 !!!". Then I click on "BLOCKS MAP" button, a new window appears showing the partition info (that already got using adb command prompt) and "create scatter file" button is grayed out... And if I try to perform the backup, it starts fine, but ends with error, and no file is backed up...
Let me mention that I already read and googled the totalbytesperchunk error and the grayed out button stuff and tried all alternatives too, and nothing worked.
My work environment:
PC = Laptop With 8 GB RAM / Windows 10 pro x64
Virtual Machines: Windows 7 pro 32 bits, Windows XP 32 bits, Ubuntu 32 and 64 bits...
What else can I do?
How can I use the second, rooted and working phone to get a rom/firmware working dump? it is possible?
If someone decides to help me, let me know what do you need (dumped files, downloaded scatter.txt files, screenshots, whatever you need...)

COM## is a COM port. You can use a terminal program to directly interact with the device.
You are not completely bricked yet.
I do not have any further details to help you, but I can tell you there is still hope.
Connect the dead device to PC, load up a terminal app (if on windows, just load up the app named Terminal)
See where you can get with that.
good luck

Please Help cesarr4: my TAG-L23 bricked - Need your TWRP
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.

antonioroa said:
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.
Click to expand...
Click to collapse
I attached the recovery I'm currently using in the second GR3. I'm still looking forward the stock rom and a way to recover the first one... have u found a way to unbrick it?
Here you can find the recovery too: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-0-huawei-tag-l01-p8-t3433520

I have the same problem with kingroot, and cannot find TAG-L23 rom.
I sent my phone to huawei support and they said it's a board problem and need to replace, the cost is near to the phone's original price.... No way!
In clangsm web page there's a stock rom but you need to pay for vip membership.
Please help with this issue.

I'm still trying to get a working rom image from the 2nd GR3 that I bought... No luck yet... I'm plenty sure that there is no need to do hardware replacement... can anyone point me to a tool/step-by-step guide to readback and save a flashable rom image from GR3 phone, and a SP tools that works with GR3 chipset/PCB?

Hi, i have a TAG-L01 and i got the same problem, i've tried a lot with no lucky, it seems sp flash tool don't support our device(or is huawei that don't want).
If you have some ideas please tell me, i will help(our devices are exactly the same, all TAG-Lxx are the same)

Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.

srgg01 said:
Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.
Click to expand...
Click to collapse
Done. Where can I share it for you?

cesarr4 said:
Done. Where can I share it for you?
Click to expand...
Click to collapse
please share your ROM in google drive. i've got same problem here.

Any link to the TAG-L23 ROM? please share as I believe mine is corrupted.

Lenovo K8 Note Red State Bootloop After Flashing Custom Recovery

Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks

beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.

Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?

beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't

k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....

DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839

thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse

I have the same problem. please help us!

HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe

I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.

custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists

I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd

custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033

Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.

I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.

custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds

Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:

custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official

Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.

Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...

[Guide]Lenovo S5 K520: TWRP, Root and Decrypt data

Hello everyone, after struggling for a few hours I managed to finally disable force encryption in my phone (so that TWRP could backup the data partition).
I'd like to write a quick list of what I did in the form of a guide to unlocking the bootloader, installing TWRP and getting root with Magisk. I'm just a user, not a developer and this guide is brief, it's not a detailed tutorial and does not include trivial steps (like how to install drivers for your OS).
Warnings: Although small, there is always the chance this bricks your phone. I take no responsibilities.
This will factory reset your phone so back up everything before you start.
My phone is Lenovo S5 (K520) Global version (see screenshot) I don't know if this will work for other firmwares.
Prerequisites:
Install Phone, ADB and Fastboot drives. You can get ADB and Fastboot binaries from here:
https://forum.xda-developers.com/showthread.php?t=2588979
Download this archive:
http://www.mediafire.com/?4dcvzw1hdmzfn10
It contains all the files used in this guide.
Alternatively, download all the files used from their sources.
You will need an SD card or a USB flash drive with an OTG adapter.
Copy the following files to it:
A. "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3817389 )
B. "Magisk-v18.0.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3473445 )
C. (optional) "\stock\boot.img"
(Downloaded from the global firmware @ 4pda)
If you chose to use Micro SD card, you can insert it now.
Note: I know there is a way to push these files directly to TWRP from PC through USB instead of using SD Card/Flash drive but I've never tried it.
Lets start:
1. Go to 'Settings>About phone' and tap on "Lenovo version" several times until developer options are enabled.
2. Go to 'Settings>System>Developer options' and enable "OEM unlocking" (Note: for me this option was greyed out and I had to connect to wifi and wait for a minute or two).
Optional: Enable "USB debugging" if you wish to enter fastboot via ADB.
3. Turn off the phone and press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" on the phone screen (alternatively, don't turn off the phone and instead enter fastboot mode via ADB (adb.exe reboot bootloader)).
4. Connect the phone to the PC via USB and open a command prompt in the location that you installed fastboot binary to.
Type (after each command press enter):
Code:
fastboot devices
To verify that the phone is recognized. And if it is type:
Code:
fastboot oem unlock
Now on the phone LCD navigate to "Yes" with volume buttons and press power to select it.
Your phone will factory reset, this will take a few minutes. Let it finish.
5. Put the TWRP image in your fastboot path. I used "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" downloaded from this URL:
https://forum.xda-developers.com/android/development/lenovo-s5-k520-twrps-t3863860
But I included 2 more files that I found (I did not try them).
6. Enter fasboot mode again and type:
Code:
fastboot flash recovery recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img
(Substitute "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" with the recovery filename of you choice)
7. If successful, disconnect the USB cable and enter Recovery mode, do not turn off or reboot the phone because upon restart the phone will revert to stock recovery (I.E. delete TWRP).
To enter Recovery mode press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" and from there choose "Recovery mode" with the volume buttons and confirm with the power button.
(Alternatively, you can try holding 'Volume up'+'Power' to directly enter Recovery mode but I found it a little finicky)
8. In TWRP, swipe to allow changes. Press cancel when asked for a password to decrypt data.
If you chose to use a USB flash drive with an OTG adapter, connect it and mount it (Mount>usb-otg).
9. Go to Wipe>format data, type "yes" and confirm (if you have any data like installed apps, contacts etc., it will be deleted).
10. Go to Install and install "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
The files will be in (/external_sd/ or /usb-otg/).
11. Install "Magisk-v18.0.zip"
Important note: If you want to keep encryption (if you don't care if TWRP can't access /data/) and just obtain root, skip steps 9 and 10.
12. Reboot to system and wait for a few minutes for the initial setup.
If for some reason boot fails (nothing happens after 10 minutes) and you can still enter TWRP (hold 'Volume up'+'Power'), then you can revert the changes by restoring the stock boot image (TWRP>Install>Install image>boot.img - put a checkmark on "boot").
If this worked for you, please tell us by replying to this thread.

Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
C4lculated said:
I also wanted to root but I didn't want to run a bunch of unknown programs (from XN Logos), so I managed to install TWRP and root with magisk. I wrote a guide on how to do it:
https://forum.xda-developers.com/ge...ide-lenovo-s5-k520-twrp-root-decrypt-t3882402
Click to expand...
Click to collapse
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide

does anyone enable lte bands, 4 and 28?

just bought this phone, currently on shipping..
I'll first try with twrp + aosp 9 GSI

Hi man, have you upgrade to gsi
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
Click to expand...
Click to collapse
Kindly drop the procedure am hitting brick with all the method i used .????????

Stock firmware lenovo k520
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.

Working on S5 Pro too?
Hi! Can it work on S5 Pro too? I really want to root this device and I don't find out a way to get this happening. Thanks!

Does this work for s5 pro l58041?
Thanks

B4ph0 said:
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Click to expand...
Click to collapse
Hi! Sorry for offtopic!
Could you please PM me the link on AOSP extended image which you installed. Thank you!

Hello! Did somebody managed to install GCAM to Lenovo S5? I'm trying and I can;t do this, magisk modules are not loading...

so far I've used 2 alternative rom and works fine, aosp & octopus os, especially octopus os

I need some help..
Did anyone had lenovo s5 persist.img..
I lost my persist afer flashing global rom.208st via qfil..
I check the rom has no persist.img

Please visit to https://youtu.be/wbpV59kutJM for tutorial flash and upgrade Lenovo S5 in YouTube

hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?

has anyone achieved unlocking bands in this phone?

Please port miui 11 9.10.30 mi-room pie 9.0 redmi note 4x SD625 to lenovo S5.
https://megaroms.net/miui-11-9-10-30-stable-port-for-redmi-note-4-4x/
https://sourceforge.net/projects/miui-ports.whats-new.p/files/mido/miroom/

After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
Suryo75 said:
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
Click to expand...
Click to collapse
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ

jychung93 said:
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
Click to expand...
Click to collapse
thank you i'll try

Could you plz make tutorial about getting back to stock unroot...thx

Twrp gone
Hello sir thank you for this wonderful tutorial,
But I have a problem , after booting to TWRP , then boot to system after that when I try to go back to recovery mode TWRP , twrp is gone , stock recovery back