Develop Bugs

Defender VS commuter

Hi,
Does anybody knows what is the bulk/size difference between the 2 cases?
same with trident aegis.
I bought my bro the commuter, but the store didnt have the defender to feel.
I think that the commuter is slick and nice, and hope the the defender is doing so as well.
Thanks!

BADtoBONE said:
Hi,
Does anybody knows what is the bulk/size difference between the 2 cases?
same with trident aegis.
I bought my bro the commuter, but the store didnt have the defender to feel.
I think that the commuter is slick and nice, and hope the the defender is doing so as well.
Thanks!
Click to expand...
Click to collapse
I have the defender case and I love it. It does add bulk to the phone. It actually makes the phone look huge, but I love it. It feels save and secure. I feel like if I were to drop my phone 5 feet down onto concrete, my phone would be fine. If you like the slick feel of the commuter, then I suggest you stay with that case. :good:

I have the commuter and I have to say that I love it and after dropping my phone from shoulder height which is prob around 5 ft high I can honestly say that this case does a great job protecting the phone.
A second thought is that there are cases like the commuter series that have a stand clip. Which is great if your going to use your phone as a media device. my sister just got the casemate pop which looks awesome.
Sent from my SCH-I535 using xda app-developers app

ergibson83 said:
I have the defender case and I love it. It does add bulk to the phone. It actually makes the phone look huge, but I love it. It feels save and secure. I feel like if I were to drop my phone 5 feet down onto concrete, my phone would be fine. If you like the slick feel of the commuter, then I suggest you stay with that case. :good:
Click to expand...
Click to collapse
I use a generic very bulky case right now.
I dont care about thickness, and i ment slickness - i like the feel of the material in the commuter.
anyway, what is the size difference between them?

The size difference is not much. I have both cases. I am no longer using the Commuter case because the back is hard plastic and very slippery. The button plastic is very hard. I use the Defender case now because the silicone cover give me a better gripe and buttons are easy to press.
Sent from my SGH-I747 using xda premium

Thanks, thats basically the answer i was looking for.
what is you opinion regarding the plastic screen protector compared to a sticker?

It's not bad, it will probably protect it better but isn't optically as good as a high end shield.
Sent from my SPH-L710 using Tapatalk 2

contradude said:
It's not bad, it will probably protect it better but isn't optically as good as a high end shield.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
such as?

zagg shields are the typical goto screen protector.... There are cheaper ones, but you typically get what you pay for.

Commuter: 5.61 in x 3.10 in x 0.56 in / 142.5 mm x 78.84 mm x 14.28 mm
Defender: 5.88 in x 3.47 in x 1.41 in / 148.84 mm x 88.14 mm x 35.81 mm

Hey badtobone. I'll give you my experiences with the cases i've bought and the zagg shield cover i purchased. At first i had a tpu case with the zagg shield and the corners started coming up where the tpu case would rub on it. Scratch that idea. Then i bought the casemate phantom. The screen protector for the case pops on the front of the phone and then you cram the phone inside the outer shell of the case. Snapped the screen protector part putting the phone in the case one day and to boot the case is huge compared to the defender series but it was on backorder of course and i couldn't wait. So scratch that idea. I've always been an otterbox fan so i was finally able to order the defender for it. Awesome to a point. The case is somewhat smaller than the phantom which is awesome and great protection but i just don't like the screen protector. I've always liked the commuter cases screen protector because it was crystal clear on my other galaxy s phones and you can appreciate the screen more. If otterbox still offers the seperate screen protector for the commuter i'll probably use that along with the defender for the ultimate case. Just my 2 cents. Hope i could help.
Sent from my GT-I9300 using Tapatalk 2

I've never had an otterbox before a few days ago, but went with the defender model.
For previous Androids i've gone with the trident cases, and like them. The ones i've had are not comparable to the defender version of the otterbox, but i'll say now that any non-slide phone in the future for me will take into consideration defender case availability as part of the purchase decision.
It just feels safe now, the device.
Some things that could be better - the trident cases I've used have covers for speaker/mic with a filter behind to keep the dust out. This is decidedly lacking on the otterbox.
The holster is awesome, though. It's like the final stage of usefulness/protection. It makes a hard plastic shield over the screen and is an extra structural reinforcement of the protection level to the device.
Already i've turned it around in the holster, screen out, and clipped it to my visor in my car. Improv GPS mount.
In the same way you can just put something in the clip for back support and have a desk/tabletop mount for the device anywhere. Sitting in a hotel room watching a movie off the nightstand is much easier with this case.
My first impression of the clip on the holster was to cut it off and make a smooth outer shell for pocket carry. I may very well buy another case to try this out. The clip being on the case has literally proven it's case not to be cut off by how immediately useful it's been.
Another drawback, my only other complaint, the built-in screen protector.
Here again is another reason to buy a second case. Beyond trying it out without the belt clip, is trying it out without the screen protector.
I've seen a lot of threads where people mention cutting the on-board screen protector out of the defender with an xacto knife or something. Owning one, I now see why. I sit here debating the ramifications of the overall case structure if I do cut it out, because I would very much like to.
The silicon shell should still hold the case together, as well as the clips underneath that hold the case together, but I do worry about separation of the front of the case to the sides without the screen protector to hold them together. Especially given the holster clip will encourage that separation through use.
When the phone came in at the verizon store, I made sure that the first thing done to the device was to put a screen protector on it. Few days later I got the otterbox. It's whole life after unboxing, it's had a screen protector adhered to it's face. That part is important, as the otterbox screen protector just sits on the face, not adhered to it. This, to me, is an unacceptable level of compromise in protection of the device.
Without being adhered, the screen is subject to dust and oils getting between the screen protector and the screen itself. Once that happens, you are looking at the overlaid 'protector' acting like a piece of sandpaper with the dirt under it every time you touch it.
All in all, I can't see myself using anything but a defender to protect the SGSIII - a few slight modifications to the case and I will be completely satisfied.
I never played with a commuter model, but here are some thoughts on the defender.

Blue6IX said:
Another drawback, my only other complaint, the built-in screen protector.
Here again is another reason to buy a second case. Beyond trying it out without the belt clip, is trying it out without the screen protector.
I've seen a lot of threads where people mention cutting the on-board screen protector out of the defender with an xacto knife or something. Owning one, I now see why. I sit here debating the ramifications of the overall case structure if I do cut it out, because I would very much like to.
When the phone came in at the verizon store, I made sure that the first thing done to the device was to put a screen protector on it. Few days later I got the otterbox. It's whole life after unboxing, it's had a screen protector adhered to it's face. That part is important, as the otterbox screen protector just sits on the face, not adhered to it. This, to me, is an unacceptable level of compromise in protection of the device.
Without being adhered, the screen is subject to dust and oils getting between the screen protector and the screen itself. Once that happens, you are looking at the overlaid 'protector' acting like a piece of sandpaper with the dirt under it every time you touch it.
Click to expand...
Click to collapse
You don't need an xacto knife to remove the built-in screen protector. The screen is adhered to the case by a strip of removable glue. Just push the screen protector in with a little force and it pops right off. You can then remove the glue around the edges by simply pulling the one long strip up around the edge.
The built-in screen protector does suck. It makes the screen very pixalated and dust does get trapped under the screen protector.
Try this out... Remove the built-in screen protector and buy a best skin ever wet protector. Apply that wet protector, let it dry completely, now place you defender case (with built-in protector removed) on the phone. This is the setup I have and it is absolutely perfect. I promise you'll love this setup. I'm extremely anal about my screen protector and case combinations for my phones and I've tried 5 different combinations before going with the BSE/defender combination. Trust me, it doesn't get better than this combination. My screen quality is perfect and my phone is secure and safe.
Sent from my SGH-T999 using xda app-developers app

Thanks to all the repliers!
so buying the case knowing that youre gonna take of the screen might be a good idea?
anl links or clips from people who did it?
anything in youtube?

BADtoBONE said:
Thanks to all the repliers!
so buying the case knowing that youre gonna take of the screen might be a good idea?
anl links or clips from people who did it?
anything in youtube?
Click to expand...
Click to collapse
You don't need any videos or anything. All you're gonna need to do is pop the screen protector off by pushing it away from the case. It's actually really simple and doesn't require much effort at all. U won't break the case doing it. Just know that once u remove the screen protector, you can't reapply it. So u may want to see what the screen clarity looks like before removing the built in screen protector. You may think the screen quality is ok with it.
Sent from my SGH-T999 using xda app-developers app

had a chance to check out both the other day.
imo there's no real comparison between the two..and the commuter is almost useless to choose over the defender
its harder to take the commuter on and off imo...
it doesn't feel as nice as the defender..and its slippery..
the buttons are hard to press.... no where near impossible or anything like anyone really says when they complain but it's definitely not convenient and its fairly annoying...I actually had the phone try to slip out of my hand a few times while squeezing the phone to press the buttons.
and....the defender for the SG3 isn't as big as you'd think it is (especially in comparison to the commuter)
best part....the silicone otterbox uses on there defender has always been my main complaint...but they've used some stiffer stuff, doesn't flop off at all (or really stretch like at all) and it doesn't feel like it will collect a ton of lint or snag too much coming out of a pocket. It's just the right amount of grip

Can anyone post pic of the 'improved' defender (without plastic screen)?

I am loving my commuter. Buttons are fine for me even the power being hard to press Is not a deal breaker. My main gripe is screen protectors seem to be an issue if they are full like the curved crystal. Lesson learned, I am going to try the one that came with the case today.
Sent from my SPH-L710

alexyaz said:
I have the commuter and I have to say that I love it and after dropping my phone from shoulder height which is prob around 5 ft high I can honestly say that this case does a great job protecting the phone.
Click to expand...
Click to collapse
Definitely. I was thinking of getting a thinner case, but I drop my phone often enough that Commuter is worth it. I have the green one and I imagine it can get quite dirty in the future.
Buttons are definitely hard to press, but I can get used to it I guess. Definitely worth it for the protection alone.

BADtoBONE said:
Can anyone post pic of the 'improved' defender (without plastic screen)?
Click to expand...
Click to collapse
It looks exactly like the defender.. Just without the plastic screen protector. Think of it as a window with no glass. The window will still look the same, it just has no glass. U will be using a wet screen protector instead of the builtin screen protector.
Sent from my SGH-T999 using xda app-developers app

Current cases insufficient, need a new one, narrowed it down

Hi guys, I need a new case but have a couple questions about the causes I've narrowed it down to. I'm a student so I want to eliminate the need for having to buy another case if I dislike my purchase.
I have 2 tpu cases currently that were cheap at local cell shops.
The first one flexes too much where the volume rocker is so it causes my screen protector to bubble every time I press it. SUPER annoying.
The second seems to be somehow scratching the edges of glass that arent protected by my screen pro.
I'm guessing this case is a bit looser and has minimal movement and allows small particles to find their way in between the glass and the case.
I'm torn between two cases and I need some info on them that I havent been able to find reading the forums or from watching youtube reviews.
1) Incipio frequency: My main concern with this case is the sides flexing and causing my screen protector to bubble. Is there anyone that owns this case and can comment on this?
2) Seidio Surface: I've always wondered about just how snug these 2 piece cases are. Does the phone have enough space in the case that it is allowed to rattle at all? or is it just snug enough to keep the phone stable without scratching it?
COLES NOTES
-Need new case
-Incipio frequency or Seidio surface
-Will incipio case cause screen pro to bubble when volume rocker pressed
-Will seidio surface slowly scratch away at the aluminum finish/curved glass edges
All input is appreciated:cyclops:

So I'm writing this because of the "All input is appreciated"
Will you consider a third case? If so, take a look at the Trident Aegis case. You can find it brand new on eBay for $20 with shipping. I've used their cases before and they look extremely nice and on top of that, they do a good job with protecting the phones. I bought one brand new from eBay and I just got it today. It looks really top-notch. I'm waiting for my phone to come in. Hopefully I'll have it tomorrow so I can play around with it and give you some more feedback on Friday.

I've had the Seidio surface for over a month and so far no scratches on the glass or aluminum body. The inside of the case is soft with a carbon fiber sticker covering the inside. The phone fits snuggly but I can see a problem if you use a thick screen protector because of the tight fit.
All the cutouts are perfect with a nice beveled edge for the camera.
The case doesn't add a lot of extra bulk, which is the reason I got, I hate giant bulky cases.

Thanks for the replies guys!
I checked out the Triden Aegis but there's something about it I just didn't like.
I ended up ordering an incipio dual pro. I like the fact that the silicon insert seems to be more rigid than normal silicon inserts

I have a surface and uag. Had the surface first and like the feel but it doesn't really offer much protection. I saw the write-up on the uag and gave it a try. My surface stays on the ready but I haven't used it since receiving the uag.
Sent from my M7 using Tapatalk 4 Beta

Testingchip said:
I have a surface and uag. Had the surface first and like the feel but it doesn't really offer much protection. I saw the write-up on the uag and gave it a try. My surface stays on the ready but I haven't used it since receiving the uag.
Sent from my M7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for all the suggestions guys!
My incipio dualpro finally came in and I have to say I'm pleasantly surprised. I had my doubts after ordering that it would be too bulky or the silicon insert would be too flimsy.
I'm pleased to say that this case exceeded my expectations. There is some bulk added, however it isnt bad. It gives the phone some heft and just feels a little more solid. Fitment is perfect.
The only negative so far is that the volume rocker is a little harder to press

[REVIEW] Incipio Feather for HTC One

I had this case on the HTC 8X in grey and it was easily one of the best cases I've ever had on any phone. The thinness, feel and texture was great.
As a first case for the HTC One I decided to buy this one but in black instead of grey to match with the light aluminum. It's a great case, it feels great, adds grip and the matte color is awesome. The grip and feeling on the back is superb. However, for that matte look, the black case texture/material is a little different than the one I had on the grey for the 8X.
It attracts finger prints and sweat or grease of your fingers. If it wasn't for this, this case would be perfect, at least for me.
If you don't live on a humid place or don't have have problems with finger prints, get this case by all means. Where I live it's almost 80%-95% humid all year so even if I don't have sweaty hands, it's inevitable that they get moist.
To sum up, it's a wonderful case, despite the problem with the smudges on the back. For that detail alone, it won't be for anyone as it would need to be cleaned two or three times a day to avoid the greasy/moist look on the back.
I do plan to get one in grey as the one I had on the 8X had an even better texture and feel and it didn't attract stains or finger prints at all. AT ALL. It was also a much of a darker grey that it showed on the pictures and I liked it even more when I got it.
For scratch protection, minimum bulk and great look and feel, this is a very good case.
View attachment 2097786 View attachment 2097787 View attachment 2097788 View attachment 2097789 View attachment 2097790
PS: I have a MEIFENG (Bear Motion) in grey and a black Nillkin case on the way. I will post about them when they get here.

WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!

My problem with the case is the open top and bottom.

djq said:
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
Click to expand...
Click to collapse
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
OGhoul said:
My problem with the case is the open top and bottom.
Click to expand...
Click to collapse
I like the open top and bottom because it adds to the lightweight of the case and allows the natural aluminum color to be displayed prominently. The accessibility of the USB port and the power button is great because there is nothing around them.
This kind of case is only for scratch protection but that's the kind I'm always looking for.

I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!

ajua said:
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
Click to expand...
Click to collapse
thats why i love this forum i learn something i may have never found out about

joudbren said:
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
Click to expand...
Click to collapse
I'm very careful with my phones and cases. I hope yours was only a detail you didn't see when you bought it.
How are you doing with the finger smudges on the back of this case? It's better than I initially thought but I still have to clean it often.
djq said:
thats why i love this forum i learn something i may have never found out about
Click to expand...
Click to collapse
Everyone is learning something on this forum all the time

Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.

Tuppidsay said:
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Click to expand...
Click to collapse
You can contact Incipio about this. The case comes with a one year warranty and I'm sure they'd be willing to cover that and replace it.:good:

I've bought a few cases for the One and this is definitely my favorite, all the rest I enjoyed but missed the slim line feel. The incipio is the best of both worlds.
Sent from my HTC_PN071 using Tapatalk 4 Beta

Just ordered one of these.
I'm seeing a lot of reviews on Amazon with the lighter colored ones hazing up flash pictures. Seems to be a common thing with close cutouts for the LED. Black cases are going to be the best to avoid flash interference.

Got mine and yes it's definitely one of the most minmalist cases I've ever used. Be careful with this one as it doesn't afford much in the way of drop protection but you already knew that...
The lip over the screen is a bit shorter than I'd like, still need to be wary of setting it down screen down just in case.
However for those that prefer the naked feel but don't want to be paranoid of scratching the back when sitting on a table, you will like this!
Be wary the plastic cutout piece along the top where the volume rockers and usb charging port are quite thin and can break if stressed too hard when putting the case on and especially taking it off, just take you time and be gentle.
The black finish does show finger grease but is easily cleaned. The incipio dual is the same way. At least it doesn't scratch super easy like some of the smooth and glossy backs.
No case is perfect, that's why I have a drawer full of different cases!

I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...

I picked up a case for my HTC One at best buy. It looks 100% identical except for the logo on the back of the case. Very nice case.

icepixie said:
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
Click to expand...
Click to collapse
There is the Poetic Palette and Nillkin Hard Case/Shell. I can't say about the front lip for the screen as I don't own them but you can search for pictures and see if it is more prominent than the lip on the feather.

Looks nice and very slim!! :laugh:

Where can I find power bank wireless charger?
Where can I find power bank wireless charger?
I want to get one.How Can i get it

Least obtrusive way to protect your phone/Poetic Bumper

Can anyone recommend the thinnest case/screen protector etc that will protect the phone incase it were to drop. All the one's I've seen still take away so much from the look of the phone, and make it look thicker. All of my previous phones including my current galaxy nexus have always been naked. The gnex has dropped on concrete and been fine, however the n5 doesn't look like it can take a fall at all.
I've stumbled across the Poetic Bordering Bumper. This looks like it's very thin. Has anyone had any experience with them before, I have no idea if this would protect a fall?
http://www.poeticcases.com/borderline-bumper
Thanks

Sympathy bump

The Poetic bumper doesn't clear the camera on the back. So laying the phone on it's back could potentially scratch the glass there. I wouldn't recommend it.
I've tried the Spigen Slim Armor, the Diztronic Nexus 5 case, and the official Nexus 5 case. Of the three the Diztronic is the easily the most svelte and closest to the shape of the original phone. I do like the official case... but no doubt it's way overpriced and it does add substantial girth to the sides of the phone. I returned the Slim Armor. It's not slim and it was flawed. At $10 on Amazon the Diztronic case is easy to recommend.

Never saw the point of worrying about the camera lens on the back. Does it stick out a little bit on this phone? Sure.
I've never used a case on a smartphone and any of the phones I've had in the last 4 years the screens looked perfect after keeping them in my pocket when I wasn't using them. Things that are hard (gorilla glass is relatively hard) are really difficult to scratch. (Being brittle, ie: shattering is another story)
Your keys won't scratch them, (the glass is harder) neither will coins, and the like. The main common material that can scratch the glass is sand. (quartz is significantly harder than the screen)
So yeah, if you live in California or Hawaii or something...you might want a FULL cover...otherwise personally it's not something you should really worry about. You spend all this money on a nice phone, with a nice feel to it...ENJOY it.
(And no, I have no idea if the glass on the camera lens is the same as on the face...personally it wouldn't surprise me if it was even harder...since ya know, it's smaller (harder but more brittle materials can be easily strengthened by being thicker) and doesn't require a touch interface)

My combo is Rhino Shield (protect from direct impact to the screen) + dbrand frame skin (protect from dents).
Also, the phone seems to be quite durable if the point of impact is on the sides, according to Android Authority's drop test.

I'll try this just for 5$ http://www.aliexpress.com/item/Goog...PC-Combo-Cases-For-LG-Nexus-5/1504212977.html

I'm very happy with this case, Ringke Slim. I tried a few others and they were either too bulky or hurt my ear. I can also still use the nexus wireless charger.

The diztronic case adds very little in size and even has a soft touch very similar to the nexus 5

The little black magnetic ring around the camera acts as a bit of a lip. I still think they should have made the camera like the n7. Love the poetic bumpers BTW :thumbup:
>^.^< Sent From Meow nexus5

The Diztronic case looks chunkier than the rinkge slim to me. Am I being blind?
Ghost and Jeff - You both have the bumper right? Is it true what I've read about the buttons being rubbish?

relax24 said:
The Diztronic case looks chunkier than the rinkge slim to me. Am I being blind?
Ghost and Jeff - You both have the bumper right? Is it true what I've read about the buttons being rubbish?
Click to expand...
Click to collapse
Yes the buttons are wack. The volume isn't as bad as the power button but they still both have very little feedback. They work well though but I'm hoping that poetic will fix the bad feedback on the buttons.
>^.^< Sent From Meow nexus5

Recommendations for a Slim, Soft-Touch TPU Case?

I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.

This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.

Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.

Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.

Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!

joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent

Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.

joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get

Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.

joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.

P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.

joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.

I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.

christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.

I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.

I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.

emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:

RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.

If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.

https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .