Develop Bugs

[ROM] New Update 08/10/2012 - [email protected] - Custom Rom based on Asus JB 4.1.1 !

Hi to everyone !
This is my first Custom Rom for Asus Transformer TF300T !
New Update : 08/10/2012 ![email protected]_V02.01
This Custom Rom [email protected] V02.01 is based on Official Asus JB 4.1.1 SKU - WW Firmware 10.4.2.13 !
Change log - V02.01 :
added custom windows animation ;
increase I/O - dynamic fsync() ;
deadline I/O scheduler ;
enabled Cleancach & Zcache ;
enabled control voltage ;
overclock GPU 520MHz ;
overclock CPU - maximum 1.6GHz !
also all stuff from [email protected]_V01 & V02 ( see Included : & Change log V02 )
Download :
please download from here the last update V02.01 -> [email protected]_Vo2.01.zip
Installation :
only over [email protected]_V02 ;
copy [email protected]_V02.01 on your device ;
go to TWRP recovery ;
wipe -> cache & dalvik-cache ;
Install ;
********************
Update : 28/09/2012 ![email protected]_V02
This Custom Rom [email protected] V02 is based on Official Asus JB 4.1.1 SKU - WW Firmware 10.4.2.13 !
Also this Rom is rooted , some tweaks was added for a better performance , android system image comes with icons modified and contains custom kernel ( building on Asus source code ! ) .
Change log - V02 :
removed custom windows animation ;
removed goole app ( ...like G-Mail, Google+, Maps , Youtube ...) - you can downloaded & install from Play Store !
deodexed Rom ;
zipaligned all apk on boot ( /system/app/* & /data/app/* );
enabled zRAM !
cifs & md4 loaded on kernel ;
tweak database with sqlite3 ;
enabled 1.4GHz & 1.5GHz !
increase I/O data speed !
also all stuff from [email protected]_V01 ( see Included : )
Download [email protected]_V02 : MD5 Sum: 2726f27a287590a159656acd02b6e853 !
*****************************************************
First release : 16/09/2012 [email protected]_V01 !
This Custom Rom [email protected] V01 is based on Official Asus JB 4.1.1 SKU - WW Firmware 10.4.2.9 !
Included :
new bootanimation ;
root access ;
enabled /init.d to run scripts ;
enabled USB debugging ;
odexed for running faster ;
zipaligned all apk in /data/app ;
/system ext4 tweaks ;
fix permission tweaks ;
build.prop tweaks ;
extended power off menu ;
transparent battery ;
also icons was replaced (90%) ! ;
windows animation ;
customization Launcher2 ( some wallpapers was replaced ) ;
Superuser & all Google app was updated on 16/09/12 ;
Download [email protected] :
Please download from here [email protected] ;
Your download [email protected] must be unzipped before use in [email protected] !
Installation :
Your device should be unlocked !
Installs only over the official version JB 4.1.1 or over another version ( Custom Rom ) which is based on the original version Asus JB 4.1.1 !!!
Also you need this version of Recovery ( TWRP 2.2.2.0 Recovery ! ) - to make sure it will not damage the device during install !!!
Save your [email protected] on your device ( /sdcard or /Removable/MicroSD) ;
Check Recovery mode on Power Off menu ... or just come in TWRP recovery mod !
On TWRP menu :
Check Wipe -> Factory Reset , Dalvik Cache & Cache !
Check Install and choose [email protected] !
...please wait till your installation will be ready !
...now just check Reboot and [email protected] will be ready to use in your device !
This Custom Rom should be work on any Asus Transformer TF300T ...and also you can use as a daily Rom !
I am not in any way responsible of your device failures during installation ! so, download and run this Custom Rom at your own risk ! Thanks for your attention !!!
bootanimation :
[email protected] in images :
Credits :
A Great THANKS to amazing developers : Scrosler & Seanzscreams , which help me for added some stuff !
& also to eyeballer for this wonderful recovery TWRP !
regard,
Surdu Petru

Hi !
If you have any issue with Google Search , please delete ( remove) Velvet.apk in the /system , than re-download Google Search from PlayStore !
Thanks @countryteazer for attention ! :good:

This looks awesome another dev for our tablet! Look forward to trying this one out! Thanks man
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

Charle692 said:
This looks awesome another dev for our tablet! Look forward to trying this one out! Thanks man
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Yes ! Thanks !
I had just moved from Archos dev. and I managed to port [email protected]_V03 from Archos on the Asus [email protected] !
Good luck ! :good:

Nice!
Bonjour!
Looking forward to your work
Sent from my Nexus S 4G using Tapatalk 2

Thanks for this. It's good to see development is picking up here. However, I just order the Galaxy Note and not sure if I will keep my tf300. But I will definitely try this.

surdu_petru said:
Yes ! Thanks !
I had just moved from Archos dev. and I managed to port [email protected]_V03 from Archos on the Asus [email protected] !
Good luck ! :good:
Click to expand...
Click to collapse
So do you need to be on ICS to flash this, or if I have already flashed JB on my TF300, will I be able to try this out?

Looks great! looking forward to it when its ready. do you think you can add onskreen cornerstone?

Thanks and Beatiful rom, when for download?
The changelog?

Great work ! Thanks for the TF300's users !

Turbojugend said:
So do you need to be on ICS to flash this, or if I have already flashed JB on my TF300, will I be able to try this out?
Click to expand...
Click to collapse
Hi !
No , as long as a Rom is based on Stock Android ! ...so you must have installed a ROM based on Asus JB ! :good:
Shu. said:
Looks great! looking forward to it when its ready. do you think you can add onskreen cornerstone?
Click to expand...
Click to collapse
Hi!
... as I think you know ....the source is just for ICS and is currently available for AOSP, AOKP & CM9 - 10 !
...sorry but I can not include a build source into official stock android ( Asus JB 4.1.1 ) !
- sure, if source will be updated for JB , I'd like to try a build AOKP with this "onskreen cornerstone" in ! So, sooner or later will be run on our device ! :good:
stevtec86 said:
Thanks and Beatiful rom, when for download?
The changelog?
Click to expand...
Click to collapse
Hi !
...downloade will be available soon ! ...also my thread will be completely today with all instructions ! :good:

[email protected] now available !
Hi !
My new custom rom [email protected] was released and is available for download !
Please check in the first post ! Thanks ! :good:

Well done my friend
Cool theme and animations :thumbup:
Sent from my Nexus S 4G using Tapatalk 2

u should but out a custom theme. . .it looks awsome

Wow man, phenomenal job on this! I mean all around excellent job. In addition to being visually beautiful, it's also the most smoothest and functionally badass ROM I've ever tried on this tablet. Thanks so much for sharing. Can't recommend it enough!
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Hi!
Thank you very much for appreciation ! ...now I use it as a daily rom ! :good:

Love the boot animation
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Hello sir, thanks for your work. You're a gentleman and a scholar
Sent from my SGH-I727 using xda app-developers app

i flashed this rom....beatiful....
only one question:
the recovery in this rom, has the cwm touch 6.0.1.3 confirm?

Well done and great stuff :good:
Inserted in the TF300 index

[KERNEL] Gingerbread 2.6.32 kernel with new Governers for LGP-350

hi...guys this is my first kernel
I m introducing gingerbread kernel with more benchmark score and more smoothness...
U can fill it
ADDED New Governors
-lagfree
-SmartassH3
-minmax
Note- This governors are preconfigured in source thanks to PECANCM and thanks to Venkatkamesh for informing me.
[ Installation ]
1. Reboot to recovery
2. Apply zip from SDCard
3. Reboot
4. DONE!
After installing this kernel plz give me benchmark score of new kernel and old kernel
if u get more than press thanks
Enjoy....
Download:-
kernel_v1
wifi fix {if u face wifi error than flash this}
Credits:-
-Thanks to PECANCM for kernel source
Kernel source-https://github.com/PecanCM

swapn said:
hi...guys this is my first kernel
I m introducing gingerbread kernel with more benchmark score and more smoothness...
U can fill it
ADDED New Governers
-lagfree
-SmartassH3
-minmax
[ Installation ]
1. Reboot to recovery
2. Apply zip from SDCard
3. Reboot
4. DONE!
After installing this kernel plz give me benchmark score of new kernel and old kernel
if u get more than press thanks
Enjoy....
Download:-
kernel_v1
Credits:-
-Thanks to PECANCM for kernel source
Click to expand...
Click to collapse
Do you thing the three governors are new ?
there are already configured in kernel sources and you can activate more governors using this command " make menuconfig "
you will get an gui select the other to activate
good luck

venkat kamesh said:
Do you thing the three governors are new ?
there are already configured in kernel sources and you can activate more governors using this command " make menuconfig "
you will get an gui select the other to activate
good luck
Click to expand...
Click to collapse
Thanks I dont know about that and about this menuconfig btw i am new in this kernel stuff and sorry for that

this kernel can be installed on a stock Froyo ROM ?

marcocea said:
this kernel can be installed on a stock Froyo ROM ?
Click to expand...
Click to collapse
i think no.i tested in cm7 its working nice.

[KERNEL][GB-I9000][Linaro 4.7.4 o3][10-dec-2013] (UV/OC) DMORE.Kernel

update: 10-dec-2013 Dmore-kernel-rev03-BM.Tar or CWM version with 367 MB available RAM
Why this GB Kernel for our old I9000 device ?
Answer: I still use this old device and i developed a new DMORE 3.6 ROM (link);
So I take some time for build this kernel and now i finally condivided with you; After a year with Cyanogen Jellybean, I turned back with GB: I re-love the amoled bright screen, the stock Samnsung Camera performances, but above all , the low battery drain !!!
Of course, Performances are not equal to a Galaxy S2 or a younger devices but for all people that do not have the possibility to change phone, this my work could help them !!
I merged Stratosk, Hardcore, Mialwe git's repositories and the last official Samsung GB Kernel release (GB_Update3) for all roms based on stock JW5/6/7/8/9/B firmware;
I continued thier hard work with my little knowledge and skill and now i condivided it with you.
NOTE: This Dmore Galaxy S-i9000 kernel can used as base with your ROMs if you like.
I personally tested it with different devices using also other kernels;
OVERVIEW – DMORE.Kernel#rev03 GingerBread GT-I9000 Galaxy S Device
- Based on latest GB Samsung base kernel (GT-I9000_Opensource_GB_Update3)
- compatible with all Samsung GT-I9000 GB ROMS (JW5/6/7/8/9/B based firmware)
- support for RFS and EXT4 partitions
- autoROOT, init.d support, su binary
- OverClock using script with recovery (1000MHz default – range 1300/1200/1.128/1000 Mhz)
- User Voltage control for CPU and Core
- backlightnotification (use*BLN Control), VoodooSound10 (use*VoodooControl)
- some tweaks, Useless debugging removed.
- for ADB users: adb shell remount
- All stock features are supported
- Tweaked ramdisk: optimized mount options & VM settings
- Compiled with last Linaro gcc 4.7.4 toolchain optimized by Christopher83, flags opt (-O3)
- I/O scheduler SIO / BFQ / Deadline / NOOP (default*SIO)
- Read ahead tweaks (512Kb cache)
- CPU governor tweaks:Governors – SmartassV2 (default), Ondemand, Smoove
- Kernel compression mode GZIP
- ARM RWSEM optimization*
- Added optimized CRC32,AES,SHA1 algorithms*
- CWM v5.0.2.7 Semaphore Recovery
- 364 MB - 367 MB available RAM (download Dmore.Kernel-revxx-BM version for 367 Mb)
- Reworked cpufreq driver. cpu states 100-200-400-800-1000/1128/1200/1300.
- automatic cleaning of old "su" binary and busybox (if you coming from Semaphore or Chainfire)
- busybox 1.20.2r2 linusyang
- hardcore gamma and RGB profile
DEFAULTS
CPU 1000Ghz by default, SmartassV2, SIO 512Kb .
For change IO Scheduler, Cpu Gevernor and for manage OC/UV use System Tuner app from PlayStore
https://play.google.com/store/apps/details?id=ccc71.pmw&hl=en
INSTALL
(Dmore-Kernel-RevXX-CWM.zip for installation with ClockWorkMode or DMore-Kernel-RevXX.zip Odin/Heimdall)
Flash from recovery using CWM files or flash extracted zImage using*Heimdall*or flash downloaded TAR archive with Odin*
For change Cpu Freqency clock simply install DMore-Kernel-CPUXXXX.zip (XXXX = 1000,1128,1200,1300)
Personally i use 1200MHZ like Freq CPU
Tips & Tricks:
If you want change the Cpu Frequency manually, you can also using Adb shell commands instead DMore-Kernel-CPUXXXX.zip CWM file.
Simply type this commands on a DOS/Linux terminal shell
adb shell
su
mount –o remount, rw /system
echo 0 > /system/dmore-cpufreq.conf #cpu= 1000Mhz
reboot
(for clocks CPU 1128,1200,1300 use echo 1, echo 2, echo 3
echo 1 > /system/dmore-cpufreq.conf #cpu= 1128Mhz
echo 2 > /system/dmore-cpufreq.conf #cpu= 1200Mhz
echo 3 > /system/dmore-cpufreq.conf #cpu= 1300Mhz )
DOWNLOAD (changelog @ post #2)
Link here: http://goo.im/devs/dmore/gt-i9000/gb-i9000-kernel
SOURCES
Github repository: https://github.com/dmore70/kernel-GB-I9000
THANKS
Big thanks devlopers and especially*mailwe(midnight kernel), stratosk(Semaphore Kernel),*hardcore (SpeedMod Kernel) ,*supercurio*(Voodoo),*neldar*(BLN) and everybody else developing Open Source software, helping or reporting, Christopher83 for optimizated Linaro *cross compiler toolchains suitable for Samsung S Phone.
NOTE: next week , monday i'll published the new GB DMORE.ROM

10-dec-2013 Added more free available RAM (367 MB) ----> download DMore.Kernel-rev03-BM

Amazing, an updated GB kernel has been needed for so long. Can't wait to try new rom. Well done
Sent from my LG-E975 using XDA Premium 4 mobile app

A captivate version, pls

Welcome back David, I've used your old DMORE GB ROMs & they were really good! It is amazing that there are still devs out there which believe in good old GB for a good old phone!
Thank you & cheers!

Thank fron kernel friend

Well done David! :laugh:
Waiting for Your new Rom.

Cool , a new GB Kernel.
A few weeks ago, me and Fishears was having this discussion about how nice it would be to have a new updated GB kernel.
You just provided a solution.
This kernel is based on JWB kernel source right ?
Also , if you have the source on github, I would like to tweak some governors for the best performance, I used this setup when running GB.

nchc said:
Amazing, an updated GB kernel has been needed for so long. Can't wait to try new rom. Well done
Sent from my LG-E975 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
For all people don't want wait until tomorrow for the tread ,following link where you can download the new DMORE3.6 ROMs + others useful my addons:silly: (simply install with CWM recovery)
Link: http://goo.im/devs/dmore/gt-i9000/DMORE3.6-NewRom
HoangTuBot said:
A captivate version, pls
Click to expand...
Click to collapse
Sorry , I have only Galaxy S devices in my hands
ts1506 said:
Cool , a new GB Kernel.
A few weeks ago, me and Fishears was having this discussion about how nice it would be to have a new updated GB kernel.
You just provided a solution.
This kernel based on JWB kernel source right ?
Also , if you have the source on github, I would like to tweak some governors for the best performance, I used this setup when running GB.
Click to expand...
Click to collapse
Yes kernel is based JW9-JWB kernel source; In this moment i'm uploading git repository;
Link here: https://github.com/dmore70/kernel-GB-I9000
I'm working for a new cpu-freq.c module where there are 5 different frequencies level (100-200-400-800-1000-1200MHZ) coming from CM10.1 github repository. Dmore-kernel rev03 use 4 different levels (stratosk kernel) , so it uses a higher battery drain; Actually I have a problem with /sys/devices/system/cpu/ directory governor interface , but i hope to solve it in the next days.

can i flash this over CM7 baseband i9000XXJVU

pryerlee said:
can i flash this over CM7 baseband i9000XXJVU
Click to expand...
Click to collapse
NO You can't

If you add fast charge support I'll kiss you

fishears said:
If you add fast charge support I'll kiss you
Click to expand...
Click to collapse
Ok I'll not add fast charge support :laugh::laugh: so you'll not kiss me.
The problem is only to have a little bit of free time for this my hobbies.
In any case if you suggest me some link where i can have more informations, I might try :silly:

davidmore said:
\
Sorry , I have only Galaxy S devices in my hands
\
Click to expand...
Click to collapse
I can be your tester

nice, I'm using Saurom right now, so this kernel will fit perfectly

How do I flash this with Odin? I don't see any .tar files in the download page

MIUI
I wish you could make a MIUI Gingerbread version or even better teach me how to do it my self

Could you made another version of your kernel with bigmem like in semaphore? (384.5MB - breaks 720p video recording, front camera pictures) I used to use this, when I was on GB.

midnight911 said:
Could you made another version of your kernel with bigmem like in semaphore? (384.5MB - breaks 720p video recording, front camera pictures) I used to use this, when I was on GB.
Click to expand...
Click to collapse
Added DMore.Kernel-rev03-BM.tar or CWM file
Here's Bigman(377MB - breaks 720p)
Here's more 3MB (364+3 = 367MB) - 720p video recording works
For 384 Mb i 'm searching on web the mach-aries.c good module

Ok... I've flashed this - DMore-Kernel-rev03-BM.tar - after reverting to stock rom from CM11 and now I am stuck in a bootloop... Any ideas?
LE: I reverted back to stock with Odin following this guide:
Step 1: Start Odin
Step 2:
a. Select PIT file as 's1_odin_20100513.pit'?
b. Select PDA file as 'PDA_DXJV9_Deodexed_Zipaligned.tar'?
c. Select PHONE file as 'PHONE_DXJV9.tar'?
d. Select CSC file as 'CSC_OLBJV9.tar'?
Step 3: Under Options: Check Re-partition, Check Auto Reboot and Check F. Reset Time
Step 4: Start the phone in the download mode
Step 5: Once ID:COM/phone is 'Added!!' click Start
Step 6: You will see a lot of red text after the flash is done, don't panic, just do a 'wipe data/factory reset' and reboot the device when done.
Step 7: Let the device boot all the way then turn it off.
Step 8: Re-enter Download Mode and re-flash only the CSC file [Step 2 d] without pit and without re-partition.
I had the files on my computer from previous revert. If anyone has the same issue and has trouble downloading all the files, just let me know.
Now, being back on stock I really want to try your KERNEL. Should I make sure of any steps before attempting to flash it with Odin as PDA? Thanks!

[Kernel][O3/OC/UC/UC/GPU OC/Zram/Exfat/Read/Scheds/Govs][G-Kernel][AOSP 4.4.X][v3]

G-Kernel​
Welcome to G-kernel : the kernel meant to drive ​
Features :​
Upstreamed Linux Kernel Source to 3.4.11
Compiled with googles 4.6.1 gcc toolchain
Sammy Kernel Spam halted
Faux Sound support
Frandom Support
Lion Heart gov
Intelliactive gov
Lagfree gov
Smartmax gov
Interactive gov as defualt in kernel
zRam Supported with kernel module with 400mb swap
Frandom supported with kernel module
Init.d Supported
GPU OC Upto 533mh
Full Exfat support
Experimental F2FS support
Cpu boost driver
Enabled KSM (kernel sampage mereging)
BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
Ondemmand plus gov
Whealthy gov
Smart Ass v2 gov
Ability to underclock
Cpu OC upto 2.1
Cpu Booster and Smooth scroll tweaks
O3 flags to speed up things
Fast Charge Support !
Read Ahead Tweaks
AND WAY MORE TO COME ...
Kernel Samepage Merging :
It lets the system share identical memory pages among different processes or virtual machines. This is done by scanning through the memory finding duplicate pages. The duplicate pair is then merged into a single page, and mapped into both original locations. The page is also marked as "copy-on-write", so the kernel will automatically separate them again should one process modify its data.
Click to expand...
Click to collapse
What is Frandom :
Frandom as quoted from rawintellect from this thread here
frandom will allow you to use crossbreeder to it's full potential. Reducing lag by orders of magnitude over the regular RNG (random number generator). please take a trip over to the crossbreeder thread here for more info.
Click to expand...
Click to collapse
Source Code
THE SOURCEE CAN BE FOUND OVER HERE
ISSUES :
This bad op
nothing in general
Downloads :
FROM V2 AND ONWARDS REFER TO MY G-DRIVE FOLDER WHICH CAN BE FOUND HERE
Mon , June 23rd v1
Tus , June 24th v2
Fri, July 4th v3

G-KERNEL CHANGELOG
Mon , June 23rd
--------------------
initial build
Tus , June 24th
--------------------
refer to my git for changelog beacuse alot to be listed here
Fri, July 4th
--------------------
Added KSM
Added experemintal f2fs support
Upstreamed source to 3.4.11
Gpu oced to 533mh
added smartmax gov
Added fastcharge
Rewrite of exfat

Credits :
Sonic-Developers
spegelius
1.ktoonsez
2.googyanas
3.Samsung
4.Google
5.Xda
6.All others who involved directly or indirectly to the development of this kernel

HOW TO OC YOUR DEVICE :
FIRST : I AM NOT RESPONISBLE TO ANYTHING THAT HAPPENES TO YOUR PHONE WITH THIS , I PROVIDE THESE INSTRUCTIONS AS IS SO IF YOU TRY THIS AND YOUR PHONE EXPLODES DONT COME CRYING
1. If you have cm rom with cm performance settigs do :
A. Open Settings > Performance
B. Choose Performance or Smartx as governor
C. If you have 444 cm there will be a slider , use that to oc
D. Use kernel tweaker to tweak other features of the kernel
d. profittttttttttttttttttttttttttttttttt !
1. If you have non cm rom without cm performance settings do :
A. Download Rom Toolbox lite from playstore
B. Go to performance tab
C. Open Cpu Control
D. Choose Performance or Smartx as governor
E. Use the slider to oc
F. Use kernel tweaker to tweak other features of the kernel
G. profittttttttttttttttttttttttttttttttt !

Going to give this a try Seems smooth

wow ... i am going to upload a version with oc uv uc , exfat , gpu oc , increased read ahead , and many more !!

New update is up !

Oh nice, gonna have to try his when i get time

Hello. How can I download the second version of kernel?
Sent from my GT-I9295 using XDA Premium 4 mobile app

6783 said:
Hello. How can I download the second version of kernel?
Sent from my GT-I9295 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
click the link ... click file from the bar that appears above the folder structure then hit download :angel:

mythi said:
click the link ... click file from the bar that appears above the folder structure then hit download :angel:
Click to expand...
Click to collapse
Thanks! It doesnt appear on mobile browsers. i had that problem, too...Now on my desktop PC i can download the kernel. Will flash it on my Vanish Rom and report back!

moviecut said:
Thanks! It doesnt appear on mobile browsers. i had that problem, too...Now on my desktop PC i can download the kernel. Will flash it on my Vanish Rom and report back!
Click to expand...
Click to collapse
what is vanish rom

Sorry, VanirAOSP!

moviecut said:
Sorry, VanirAOSP!
Click to expand...
Click to collapse
ohhhh lol ... did it boot nicely , hows your impressions so far

Both thumbs up! Latest vanir nightly + v2 kernel. Great so far!
Gesendet von meinem GT-I9295 mit Tapatalk

Seems that this wont go higher than normal maximum frequency.

ElakNovAlamak said:
Seems that this wont go higher than normal maximum frequency.
Click to expand...
Click to collapse
ya ... i noticed this strange behaviour ... does it make bench marks scores higher if you go up in frequencies i couldnt test beacuse i have bad experince with benchs
edit : try using kernel tweaker app to oc

mythi said:
ya ... i noticed this strange behaviour ... does it make bench marks scores higher if you go up in frequencies i couldnt test beacuse i have bad experince with benchs
edit : try using kernel tweaker app to oc
Click to expand...
Click to collapse
I tried both rom's own processor settings and Rom Toolbox Pro. Both show 2214 MHz as max, but tried almost every test and all I got is default 1890 MHz
Governors and schedulers work fine. Also uc works fine too.

ElakNovAlamak said:
I tried both rom's own processor settings and Rom Toolbox Pro. Both show 2214 MHz as max, but tried almost every test and all I got is default 1890 MHz
Governors and schedulers work fine. Also uc works fine too.
Click to expand...
Click to collapse
ya ... something strange ... all features work only oc i will look into this more

mythi said:
ya ... something strange ... all features work only oc i will look into this more
Click to expand...
Click to collapse
do you know where I can find the original kernels for the device?
not sure how the modem could be affected - but my signal is way lower than normal - no more 4G where is used to get it - also goes doen from H+ to H most of the time.

[KERNEL] [3.4.113] [STABLE] [NEW UPDATE 070217] The-Light-Weight-Kernel

This kernel is what i use personally and i'm just sharing it for anyone who wants a stable kernel with good battery.
THE LIGHT WEIGHT KERNEL
DOWNLOADS :
LWK-i9500 Folder
[ Do Not Mirror! ]
Code :
GCM : For CM13
RR : Resurrection Remix
NOTE : WIPE APPDATA OF YOUR KERNEL APP BEFORE FLASHING !
USE GEAR/TWRP RECOVERY TO FLASH THE KERNEL.
Bugs/Workarounds :
* Rarely Random Reboots can occur.
Sources : Github
Latest
Credits :
* Andreilux (For many things)
* Voltaqe (always helpful)
* halaszk (LMK Optimisations)
* Alberto96 (f2fs support)
* MemAllocatoR (vibration control)
* jwchen (occasional compiling)
* arter97 ( lazyplug )
* and many others

CHANGLOG :
* Just check my github !

It looks promising , I hope to see more features coming for this kernel in future. Keep up the good work bro

Great job mate!??

Woow good to see our i9500 have new kernel.. Waiting for more features.. Hope you can make for kitkat too sir.. Lol

thank you so much and i hope this little project gets bigger and bigger good luck mate

Noriyuki_Fariz said:
Woow good to see our i9500 have new kernel.. Waiting for more features.. Hope you can make for kitkat too sir.. Lol
Click to expand...
Click to collapse
You have the PERFECT kernel for kit Kat a.k.a. Perseus ( is it not available ? Rom switcher uses it )

asad007 said:
PS:
=> This kernel DOES NOT support init.d ( yet )
=> I am still learning , Help is always welcome
Click to expand...
Click to collapse
As far as I try, I can't make init.d support for enforcing samsung official LP OA7 to work by editing its ramdisk.
Even using term-init.sh for universal init.d enabler on official rooted OA7 enforcing and prism barebone enforcing, will not work.
Have u tried to enabled it but fail?
I think, maybe becoz your kernel boot at enforcing state.
If you completely remove enforcing and set permissive or disable selinux only, its different story
I'm sorry for my bad english.

If I disable selinux , the kernel would not boot ( I tried doing that ) so I'll see what I can do about booting in the permissive mode itself

And then maybe the code for init .d in the ram disk may work :thumbup:

asad007 said:
You have the PERFECT kernel for kit Kat a.k.a. Perseus ( is it not available ? Rom switcher uses it )
If you want I can compile from Perseus kit Kat sources but that would not be my work ( Perseus is the best kernel so far )
Click to expand...
Click to collapse
Yeah i know it sir thanks to Andrei.. But 1 problem is with v19.1 alpha tethering not detected in other device.. I only hope it will fixed soon by Andrei or by other dev.. And Romswitcher v3.1 still need more features i think like zram so swap will work too..

OP updated with second release
changelog :
using LZO compression instead of XZ , kernel is heavier but execution is faster (eg; booting time is less) also this should fix the high battery drain
Kernel boots as permissive
PS:
1) The code in the init.rc does not get executed for init support ( ill work on it soon after my exam in a day or two )
2) Please test the battery life and performance on this one
Thank You

What are the two frequencies available?

The min and max
BTW I found that on some apps the frequency can't be set
For example in aero control you can't set frequency but you can use memory tweaks like ksm on it
On the other hand in no frills you can use only min and max frequency
While on cpu tuner you get three frequencies min , max and 600Mhz
It's your call mate what you want

asad007 said:
The min and max
BTW I found that on some apps the frequency can't be set
For example in aero control you can't set frequency but you can use memory tweaks like ksm on it
On the other hand in no frills you can use only min and max frequency
While on cpu tuner you get three frequencies min , max and 600Mhz
It's your call mate what you want
Click to expand...
Click to collapse
Battery backup seems to be promissing... but after 45min of usage when i clicked the app drawer it got rebooted. pls add LUCurative or smartassv2 governer and init.d support.
---------- Post added at 01:09 PM ---------- Previous post was at 12:48 PM ----------
itsme12345 said:
Battery backup seems to be promissing... but after 45min of usage when i clicked the app drawer it got rebooted. pls add LUCurative or smartassv2 governer and init.d support.
Click to expand...
Click to collapse
Also cpy spy dont show up the frequency usage it says kernel not supported. pls look that also.
---------- Post added at 01:30 PM ---------- Previous post was at 01:09 PM ----------
Second reboot...

^ That is because I removed debugging stuff to make the kernel lighter If I add it ,size would grow (let's see)

What would be cause of reboot...may be ram issue..

Have Stweak support?

THANK YOU SO MUCH <3 I have been dying and searching for a good KERNEL since the stock drains battery just when the screen is turn on for even 5 mins
THANK YOU SO MUCH MAN REALLY APPRECIATE IT

OP updated ,
Minor Update , Not much of a changelog present ( just minor changes here and there )
Second post updated with Touchscreeen sensitivity tweak ( this is a must , it makes the whole interface buttery smooth )
and some battery saving defaults ( cause at the end of the day , battery is all that matters)