Related
I have flash my rom with RUU ultilities. It get error(132): Signarure error
It said please get the correct ROM Update too :sadly: i dont know how to solve the problem.
My phone buy from Taiwan, TW320e, Cid is 621. thanks if Anyonehelp
p/s: please help
Wrong Section, try this thread http://www.filefactory.com/f/0eafb9c43276c308/ second from the top.
I have done to this session
here is the log from fastboot:
c:\fastboot>fastboot flash recovery recovery_signed.img
sending 'recovery' (4372 KB)...
OKAY [ 2.638s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 3.134s
c:\fastboot>
tell me how to solve thing if you know. pressed the thanks
that recovery is of older ruu and if u updated ur fone to the latest 1 the bootloader has also been changed so older 1 cant work and sadly new ruu is not available.. soo if u ready to shell out some bucks then contact football
Sent from my One V
So out there no way to get back to stock rom now. Custom roms are good, but it suddenly unstable for now. may be 1 month or more. I just want to go back for stable and good battery. that is all i need for now. another help please?
YEsterday i have bought my htc one x and as all te other phones i wanted a custom rom,to simunlock it , so i unlocked the bootloader , put CWMR, Root and did a nandroid backup , Then i used this guide http://forum.xda-developers.com/showthread.php?t=1920060http://
But now my phone dont want to boot and i have forgotten to put the rom on my phone either XD i did a restore already and cleaned the cache but it isn working.. who can help me ?
At wich point you are?
For put the rom into sd you can use the mount sd from recovery
I was at the poit where you put the command,fastboot oem rebootRUU, and i got straight away the silkver HTC letters and i tried to flash firmware but that didnt worked .:/
VivaLaPascal said:
I was at the poit where you put the command,fastboot oem rebootRUU, and i got straight away the silkver HTC letters and i tried to flash firmware but that didnt worked .:/
Click to expand...
Click to collapse
What was the error you got?
Dis you lock the bootloader?
Sent from my HTC One X using xda app-developers app
What is the error?
hej guys he's talking about simunlocking....that's not going to work by unlockng the bootloader ! totally different
but.....
you only need to do this :
lock the bootloader (like stated above)
fastboot oem lock
then
fastboot oem rebootRUU
then
Fastboot flash zip firmware.zip (with the firmware.zip in the fastboot folder)
that's all.....
the problem is that i cant flash the firmware, yes i locked it again , at the moment its unlocked and now hen i turn on my phone it gets stuck at the o2 screen, you are simlock free when you change your rom as far as i now:laugh: ps where is my fastboot folder?
The firmware.zip must be in the folder where you have fastboot.
Because if the zip isn't in this folder, fastboot can't flash this.
No you are not simlock free when changing Rom !
I don't know where you left it do a search for fastboot.exe file or adb.exe file it should pop up somewhere
Mr Hofs said:
No you are not simlock free when changing Rom !
I don't know where you left it do a search for fastboot.exe file or adb.exe file it should pop up somewhere
Click to expand...
Click to collapse
lol i unlocked my sensation that way XD so i put the firmware in the folder and try to push it to the phone ?
I Tried to flash the firmware again, the first two times it failed and the third time it is gets stuck at sending frimware ... C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
OKAY [ 1.747s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 3.245s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
FAILED (remote: (00030003))
finished. total time: 0.000s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
I know because you had a S-OFF device. The HTC oke X is S-ON so you will not get it simunlocked this way !
And yes you put the firmware.zip inside the fastboot folder and then execute the commands i wrote earlier
Did you download the corresponding firmware for your CID ?.
VivaLaPascal said:
I Tried to flash the firmware again, the first two times it failed and the third time it is gets stuck at sending frimware ... C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
OKAY [ 1.747s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 3.245s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
FAILED (remote: (00030003))
finished. total time: 0.000s
C:\Users\Home\Desktop\One_X_All-In-One_Kit_v2.3\data> fastboot flash zip C:\firm
ware.zip
sending 'zip' (13033 KB)...
Click to expand...
Click to collapse
Fastboot oem readcid
Then download the proper firmware from mike1986 firmware post.
Sent from my HTC One X using xda app-developers app
Mr Hofs said:
I know because you had a S-OFF device. The HTC oke X is S-ON so you will not get it simunlocked this way !
And yes you put the firmware.zip inside the fastboot folder and then execute the commands i wrote earlier
Did you download the corresponding firmware for your CID ?.
Click to expand...
Click to collapse
AAh lol ok XD sending the firmware still doesnt work , my cid: O2___001 , that is equal to cidnum: HTC__001 right? i have downloaded my firmware from here http://d-h.st/users/baadnewz/?fld_id=3041#files
Nooo ow god ! They are different......O2 - HTC ....VERY DIFFERENT !
Go here and download the EXACT matching firmware
http://forum.xda-developers.com/showthread.php?t=1957376
O2__001 firmware to hboot 1.36 !
Mr Hofs said:
Nooo ow god ! They are different......O2 - HTC ....VERY DIFFERENT !
Go here and download the EXACT matching firmware
http://forum.xda-developers.com/showthread.php?t=1957376
O2__001 firmware to hboot 1.36 !
Click to expand...
Click to collapse
so i flash this and then flashthe rom ? thank you very much! feel so stupid xd
VivaLaPascal said:
AAh lol ok XD sending the firmware still doesnt work , my cid: O2___001 , that is equal to cidnum: HTC__001 right? i have downloaded my firmware from here http://d-h.st/users/baadnewz/?fld_id=3041#files
Click to expand...
Click to collapse
Hi Mate,
02__001 is not the same in anyway as HTC__001. HTC__001 is unbranded uk, 02__001 is then obviously 02 branded, do not confuse the two. Right if you have made a nandroid back up and still have custom recovery installed, have you extracted a copy of your boot image from your nandroid if so, flash the boot image using fasboot command, when phone is connected to PC, then boot in to recovery and restore nandroid.
If this is not the case you need to supply some more info about your phone, what base it was on when you got it, what HBOOT you are currently on, because if your are on a lower HBOOT than a JB firmware then you will not be able to do a JB RUU, you may have to do a ICS RUU.
So for starters
is your bootloader ***unlocked***
are you using international HOX ie ENDEAVORU
what is HBOOT ...
once the community know exactly what you are working with and what you have done people will be best placed to help you. Please bare in mind the HOX is not fully unlocked like previous HTC devices ie no "S-OFF" unless you are very lucky, so it is not as easy as just flash, there are a lot of fastboot commands to be aware of a little reading prior to actioning anything on your phone will go a long way.
Qball
qball11 said:
Hi Mate,
02__001 is not the same in anyway as HTC__001. HTC__001 is unbranded uk, 02__001 is then obviously 02 branded, do not confuse the two. Right if you have made a nandroid back up and still have custom recovery installed, have you extracted a copy of your boot image from your nandroid if so, flash the boot image using fasboot command, when phone is connected to PC, then boot in to recovery and restore nandroid.
If this is not the case you need to supply some more info about your phone, what base it was on when you got it, what HBOOT you are currently on, because if your are on a lower HBOOT than a JB firmware then you will not be able to do a JB RUU, you may have to do a ICS RUU.
So for starters
is your bootloader ***unlocked***
are you using international HOX ie ENDEAVORU
what is HBOOT ...
once the community know exactly what you are working with and what you have done people will be best placed to help you. Please bare in mind the HOX is not fully unlocked like previous HTC devices ie no "S-OFF" unless you are very lucky, so it is not as easy as just flash, there are a lot of fastboot commands to be aware of a little reading prior to actioning anything on your phone will go a long way.
Qball
Click to expand...
Click to collapse
Please read the thread next time queball
We know what he is doing ..... he just got the wrong firmware. And i already gave him the link to the right one so......
And yes flash the right firmware, flash a custom recovery, flash the boot.img from the desired rom, full wipe in recovery and a clean install of the new Rom.
Hello,
Im having reallly big problem with my Desire HD device and unfortunately,I realize this is only my fault and inadvertence. Im hoping that someone will help me with my problem...
First of all, I've had stock 2.3.5 on my device and every possible blockade. I've used Downgrade_v2 files (with adb and Gingerbreak and 1.32 stock android) but it wasn't working as it supossed to do. I've found nice tool to unblock DHD, called EasyAceRootTool. Everything went OK, new H-Boot was uploaded, unblock process went smoothly, Revovery Touch was uploaded to DHD as well, Superuser was installed too.
And at this level I've hurried too much, because I've installed by recovery new rom on Android 4.0.4 , this one : http://forum.xda-developers.com/showthread.php?t=1839004
And of course... I know now iVe forgot to make S-OFF, android doesn't start, nothing happens at all....
My Hboot now says :
Hboot :
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.0020029
RADIO -26.14.04.28_M
Ive tried a lot of soutions
1)Install PD98IMG.zip on sdcard (2 different stock roms) but when Bootlader is checking image, it says, that newer android is already on device
2)Install RUU, It says that there is a problem with Hboot and i need to wait for upgrade
3)Install PD98IMG.zip (pulled out from stock RUU) by recovery, it says that this image is "bad"
4)Restore backed up adnroid from this thread http://forum.xda-developers.com/showthread.php?t=920876&highlight=hboot, from section "Install stock Vodafone ROM", but it didn't helped as well, it says MD5 checksum failed...
5) When im trying to unlock Hboot in EasyAceRootTool, it communicating with device, but then it says : "Your device is not recognized"
Please guys... what else should I do ??
ps. I know there's a lot of grammatic mistakes, sorry for that. I was trying to check what I was writing
You've relocked your bootloader. You need to re-unlock it. Also, each time after you flash a ROM, you need to extract the boot.img from the ROM zip and
Code:
fastboot flash boot boot.img
bananagranola said:
You've relocked your bootloader. You need to re-unlock it. Also, each time after you flash a ROM, you need to extract the boot.img from the ROM zip and
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
tried to do that in bootloader is fastboot mode, and it says :
C:\win>fastboot flash boot boot.img
sending 'boot' (2932 KB)... OKAY [ 0.496s]
writing 'boot'... INFOsignature checking..
FAILED (remote: signature verify fail)
finished. total time: 0.973s
peanek said:
tried to do that in bootloader is fastboot mode, and it says :
C:\win>fastboot flash boot boot.img
sending 'boot' (2932 KB)... OKAY [ 0.496s]
writing 'boot'... INFOsignature checking..
FAILED (remote: signature verify fail)
finished. total time: 0.973s
Click to expand...
Click to collapse
Like I said, you relocked your bootloader. First you need to re-unlock your bootloader.
bananagranola said:
Like I said, you relocked your bootloader. First you need to re-unlock your bootloader.
Click to expand...
Click to collapse
Sorry, I haven't read properly
C:\win>fastboot flash unlocktocken Unlock_code.bin
sending 'unlocktocken' (0 KB)... OKAY [ 0.014s]
writing 'unlocktocken'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.019s
It's an unlock coode made in HTCDev.com, with a signature of my handset...
Is your phone in fastboot mode?
bananagranola said:
Is your phone in fastboot mode?
Click to expand...
Click to collapse
OK, there was a trivial bug, I've wrote unlocktocken instead of unlocktoken it is working now !!
Thanks man, I was fighting with this device for more than whole week, thanks for your help
peanek said:
OK, there was a trivial bug, I've wrote unlocktocken instead of unlocktoken it is working now !!
Thanks man, I was fighting with this device for more than whole week, thanks for your help
Click to expand...
Click to collapse
Ok, Im having other problem, tried to use fastboot flash boot boot.img, everything went OK, file was sended, but nothing happens, Hboot is still 2.00.0029, tried to use RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed, but after reboot, when i see HTC on black screen, when RUU should send new update, error is occured.
PD98IMG.zip on sdcard can't install too.
peanek said:
Ok, Im having other problem, tried to use fastboot flash boot boot.img, everything went OK, file was sended, but nothing happens, Hboot is still 2.00.0029, tried to use RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed, but after reboot, when i see HTC on black screen, when RUU should send new update, error is occured.
PD98IMG.zip on sdcard can't install too.
Click to expand...
Click to collapse
The boot.img isn't the bootloader. You need to flash the ROM (not RUU), then fastboot flash the boot.img.
bananagranola said:
The boot.img isn't the bootloader. You need to flash the ROM (not RUU), then fastboot flash the boot.img.
Click to expand...
Click to collapse
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.277s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.750s
or 2 others zip with ROM I've downloaded. Hboot is unblocked for 100%
Wait, no. Flash the ROM from recovery. You can't flash zips like that in fastboot. You can flash ROM images, but it makes more sense for you to get a recovery and flash zips instead.
If you don't have a recovery, first you need to install one. If you have a rooted ROM, you can install a recovery from apps: ROM Manager for ClockworkMod, 4ext Updater apk (from 4ext's website) for 4ext, and GooManager for TWRP. If you don't, download a recovery.img and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
.
If you do, just go straight to flashing the zip from recovery. Then,
Code:
fastboot flash boot boot.img
.
bananagranola said:
Wait, no. Flash the ROM from recovery. You can't flash zips like that in fastboot. You can flash ROM images, but it makes more sense for you to get a recovery and flash zips instead.
If you don't have a recovery, first you need to install one. If you have a rooted ROM, you can install a recovery from apps: ROM Manager for ClockworkMod, 4ext Updater apk (from 4ext's website) for 4ext, and GooManager for TWRP. If you don't, download a recovery.img and flash it from fastboot:
Code:
fastboot flash recovery recovery.img
.
If you do, just go straight to flashing the zip from recovery. Then,
Code:
fastboot flash boot boot.img
.
Click to expand...
Click to collapse
OK, first of all, I'm having recovery, 5.8.7.2 Touch version that was installed with EasyAceRootTool.
I can't install any .apk, because I have now installed 4.0.4 rom, and because of S-ON, it will not start. I was trying to install few roms from recovery of course (Stock versions downloaded from xda, 1.32 versions and 2.3.5.), but every time I am doing this, revovery give me a error "installation aborted (bad)" it's from a PD98IMG zip downloaded from xda and rom.zip pulled out from "RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed"
When I am trying to do in fastboot mode :
Code:
fastboot flash system system.img
(system.img from stock roms, they are uploading, says OK for writing, but when I reboot phone, I see green HTC on white screen, then black screen, and then everytime phone reboots in recovery.
Few minutes a go i tried :
Code:
fastboot eease cache
fastboot oem rebootRUU
fastboot flash zip PD98IMG.zip
but every time it says :
Code:
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.215s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.713s
peanek said:
OK, first of all, I'm having recovery, 5.8.7.2 Touch version that was installed with EasyAceRootTool.
I can't install any .apk, because I have now installed 4.0.4 rom, and because of S-ON, it will not start. I was trying to install few roms from recovery of course (Stock versions downloaded from xda, 1.32 versions and 2.3.5.), but every time I am doing this, revovery give me a error "installation aborted (bad)" it's from a PD98IMG zip downloaded from xda and rom.zip pulled out from "RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed"
When I am trying to do in fastboot mode :
Code:
fastboot flash system system.img
(system.img from stock roms, they are uploading, says OK for writing, but when I reboot phone, I see green HTC on white screen, then black screen, and then everytime phone reboots in recovery.
Few minutes a go i tried :
Code:
fastboot eease cache
fastboot oem rebootRUU
fastboot flash zip PD98IMG.zip
but every time it says :
Code:
C:\win>fastboot flash zip UPDATE.zip
sending 'zip' (336097 KB)... OKAY [ 57.215s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 62.713s
Click to expand...
Click to collapse
What are you trying to do?? If you have an unlocked bootloader a RUU will never flash. Besides, being S-ON requires the specific RUU for your device.
If you have CWM and an unlocked bootloader, you can flash any custom rom in recovery but need to flash boot.img after flashing the rom.
You can't flash apks in recovery, only zips. Then fastboot flash the boot.img.
bananagranola said:
You can't flash apks in recovery, only zips. Then fastboot flash the boot.img.
Click to expand...
Click to collapse
glevitan said:
What are you trying to do?? If you have an unlocked bootloader a RUU will never flash. Besides, being S-ON requires the specific RUU for your device.
If you have CWM and an unlocked bootloader, you can flash any custom rom in recovery but need to flash boot.img after flashing the rom.
Click to expand...
Click to collapse
Ok, I was trying to put this device on feet, because it wasn't load any ROM I was flashing. There's a lot of tools and tutorials that I was reading before flashing DHD on xda and other forums. I was convinced, that I need S-OFF to use custom ROM. Few minutes a go I flashed Sabsa-Prime ROM by Recovery, then i searched for boot.img in Sabsa_Prime_v16.0_By_AlirezaB.zip, flashed it in fastboot, anddddd tadaaam...Everythings working perfectly
Thank You gyus, I really appreciate your help !! I was really stuck on this device...
Best Regards !
I need help...NOOB!!!
Hi there i need help.. my phone is stuck on a relocked screen and i cant get it tp power up... i will post a pic so maybe someone can help me out asap...
good
hiii please help mee!!
peanek said:
Hello,
Im having reallly big problem with my Desire HD device and unfortunately,I realize this is only my fault and inadvertence. Im hoping that someone will help me with my problem...
First of all, I've had stock 2.3.5 on my device and every possible blockade. I've used Downgrade_v2 files (with adb and Gingerbreak and 1.32 stock android) but it wasn't working as it supossed to do. I've found nice tool to unblock DHD, called EasyAceRootTool. Everything went OK, new H-Boot was uploaded, unblock process went smoothly, Revovery Touch was uploaded to DHD as well, Superuser was installed too.
And at this level I've hurried too much, because I've installed by recovery new rom on Android 4.0.4 , this one : http://forum.xda-developers.com/showthread.php?t=1839004
And of course... I know now iVe forgot to make S-OFF, android doesn't start, nothing happens at all....
My Hboot now says :
Hboot :
***Relocked***
ACE PVT SHIP S-ON RL
HBOOT-2.0020029
RADIO -26.14.04.28_M
Ive tried a lot of soutions
1)Install PD98IMG.zip on sdcard (2 different stock roms) but when Bootlader is checking image, it says, that newer android is already on device
2)Install RUU, It says that there is a problem with Hboot and i need to wait for upgrade
3)Install PD98IMG.zip (pulled out from stock RUU) by recovery, it says that this image is "bad"
4)Restore backed up adnroid from this thread http://forum.xda-developers.com/showthread.php?t=920876&highlight=hboot, from section "Install stock Vodafone ROM", but it didn't helped as well, it says MD5 checksum failed...
5) When im trying to unlock Hboot in EasyAceRootTool, it communicating with device, but then it says : "Your device is not recognized"
Please guys... what else should I do ??
ps. I know there's a lot of grammatic mistakes, sorry for that. I was trying to check what I was writing
Click to expand...
Click to collapse
Hello everyone, I started to play around with all the diff things you can do with a rooted phone had plans for getting a custom ROM for my phone. Let me stat by saying that I am very new to all this.
I day ago i was getting ready to install the custom ROM for viper (ViperOneM8_1.7.1) reason being is coming from a htc one m7 with sense i wanted to get back to sense from my stock GPe m8.
I was able to unlock my bootloader and get my phone rooted I fallowed this video (How to Root your HTC One M8 - Full Guide) From Sakitech... or least I think im rooted still... I'll come back to you as to why I say "I think I'm rooted".
I thought it would be very simple just fire up the custom recovery and flash the ROM and sit back while it flashed, well everything went down hill from this point. Let me tell you what i did.
First i got to the custom recovery and I did a wipe I did advanced wipe and checked the boxes this is where I think I deleted the OS(after this I could not get back on the phone to do anything only will boot to recovery and it say no OS installed then asks if I want to get SuperSU installed this is where I already thought I was rooted but maybe on not??? I'm very confused about that
Then I used the sideload method to push the rom zip and try to flash the rom at this point I cant get it to flash. First I was getting the MD5 error I checked that off now it will just fail either saying error executing the binary from the zip or that zip is corrupted. (I tried re-downloading the ROM even from mirror link)
At this point I am very frustrated and feel helpless. I tried my best to keep from posting this and try to research to see if i can find the solution myself but I'm having no luck I have my days off from work to get my phone up and running or ill just have to go but another phone. At this point I really need some help. All I want is a working phone if i can get back to GPe stock that would be fine or make the ViperOne work.
Attempts to solve my problem: I tried flashing GPE4.4.3_m8.zip and other stock GPe ROMs nothing works
Thanks for reading and all your help I will sit nest to my comp and answer anything to try make everything as clear as possible. Thank you again
So I tried ViperOne again and it was starting to install but then fails. I searched around and I found that i need to have s-off to be able to install the ROM.
Can I get s-off from the recovery or bootloader/fastboot?
Demonwarrior said:
So I tried ViperOne again and it was starting to install but then fails. I searched around and I found that i need to have s-off to be able to install the ROM.
Can I get s-off from the recovery or bootloader/fastboot?
Click to expand...
Click to collapse
no offense, buy you need to read before you continue anything else.
rbouza1 said:
no offense, buy you need to read before you continue anything else.
Click to expand...
Click to collapse
None taken, I appreciate the reply and I will continue to do more research. Do you have any info I could use?
Demonwarrior said:
None taken, I appreciate the reply and I will continue to do more research. Do you have any info I could use?
Click to expand...
Click to collapse
Try this :
Do a full wipe in the recovery, install viper rom but do not choose to do a full wipe in the aroma installer. Once finished you flash the boot.img via fastboot and then reboot the phone.
You do not need s-off to flash custom roms. But the GPE thingy can be the problem....
Mr Hofs said:
Try this :
Do a full wipe in the recovery, install viper rom but do not choose to do a full wipe in the aroma installer. Once finished you flash the boot.img via fastboot and then reboot the phone.
You do not need s-off to flash custom roms. But the GPE thingy can be the problem....
Click to expand...
Click to collapse
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Demonwarrior said:
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Click to expand...
Click to collapse
fastboot flash img boot.img
---------- Post added at 06:28 PM ---------- Previous post was at 06:25 PM ----------
try that command, and what model did you have originally and did you convert to gpe or flash a gpe ROM.
gave me an error
Code:
FAILED (remote: signature verify fail)
Its a stock Google play edition I bought from the Google paly store, I didnt flash any other rom the ViperOne rom was going to be the first flash on the phone
Do you have an SD reader on your laptop? You can buy a big SD that you can put a small SD card inside it, then put the ROM zip file inside the SD card, after that plug it in your M8 and flash it via twrp.
Let me know if you couldn't understand any point cuz my English is not that good.
iHagbani said:
Do you have an SD reader on your laptop? You can buy a big SD that you can put a small SD card inside it, then put the ROM zip file inside the SD card, after that plug it in your M8 and flash it via twrp.
Let me know if you couldn't understand any point cuz my English is not that good.
Click to expand...
Click to collapse
I know how to push the rom trough adb to flash it thats not the problem the problem is that i cant get it to install properly. Thanks for the reply though i appreciate it.
Demonwarrior said:
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Click to expand...
Click to collapse
Correct command is fastboot flash boot boot.img
status 7 means you don't have right recovery for that ROM
Also search about Stock GPE partition layout, is it same as normal non-GPE. I doubt it as I seen somewhere about people do full conversion to GPE, they need to reflash firmware to correct the partition for Sense ROM. This is what I understand from this thread : http://forum.xda-developers.com/showthread.php?t=2708589
ckpv5 said:
Correct command is fastboot flash boot boot.img
status 7 means you don't have right recovery for that ROM
Also search about Stock GPE partition layout, is it same as normal non-GPE. I doubt it as I seen somewhere about people do full conversion to GPE, they need to reflash firmware to correct the partition for Sense ROM. This is what I understand from this thread : http://forum.xda-developers.com/showthread.php?t=2708589
Click to expand...
Click to collapse
I have researched about the partition layout and I think you are right. How do i get the right partition layout? this is all a learning experience for me lol. I just hope i can get my phone working again.
In thats case then i might be worse off then i though my phone is s-on an there is no way for me to get it s-off in its current bricked state... to the the Ruu to install
correct me if im wrong but then what i have to do is just flash the stock rom for gpe beacuse since my phone was already stock GPe the the frieware(partition layout) will apcct it... right?
I want to thank everyone at the this point it looks like i have a lot of learning to do. Thank you
Demonwarrior said:
I know how to push the rom trough adb to flash it thats not the problem the problem is that i cant get it to install properly. Thanks for the reply though i appreciate it.
Click to expand...
Click to collapse
I know, but I told you this way in case that the adb didn't flash the whole zip file!
Demonwarrior said:
I have researched about the partition layout and I think you are right. How do i get the right partition layout? this is all a learning experience for me lol. I just hope i can get my phone working again.
In thats case then i might be worse off then i though my phone is s-on an there is no way for me to get it s-off in its current bricked state... to the the Ruu to install
correct me if im wrong but then what i have to do is just flash the stock rom for gpe beacuse since my phone was already stock GPe the the frieware(partition layout) will apcct it... right?
I want to thank everyone at the this point it looks like i have a lot of learning to do. Thank you
Click to expand...
Click to collapse
Follow the link in the post you quoted:
http://forum.xda-developers.com/showthread.php?t=2708589
You should really read carefully before doing stuff with your phone, especially when you are unexperienced.
If you are unsure about anything, ask before you try messing with something and hope that it will work.
You didnt, and now you have the mess.
But now even now you are not able to follow the instructions people are giving you.
In the post you just quoted there are instructions how to go from GPE to Sense and also back (#1 and #2 post)
j to the 4n said:
Follow the link in the post you quoted:
http://forum.xda-developers.com/showthread.php?t=2708589
You should really read carefully before doing stuff with your phone, especially when you are unexperienced.
If you are unsure about anything, ask before you try messing with something and hope that it will work.
You didnt, and now you have the mess.
But now even now you are not able to follow the instructions people are giving you.
In the post you just quoted there are instructions how to go from GPE to Sense and also back (#1 and #2 post)
Click to expand...
Click to collapse
I tried the instruction on the thread it didnt work... I think its because i have s-on
Code:
C:\Users\owner\Desktop\htc one\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.058s]
finished. total time: 0.061s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.483s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.846s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.484s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.665s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.479s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.662s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.478s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.661s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.458s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.641s
C:\Users\owner\Desktop\htc one\platform-tools>
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.470s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.650s
C:\Users\owner\Desktop\htc one\platform-tools>
The post says to try it a few times but still giving me the say error
This is gonna be long, so BIG thanx in advance for reading this post.
I will give as much info as possible to let u guys better determine whats going on, be prepared for a long read.
I have been fiddling with android 4-5 years ago, but that's it, so I consider my self a noob.
here it goes...
1) I have purchased an "international ver. HTC M8 brand new" from amazon third party seller for 200.00 USD
2) came with many evidence showing it's not brand new, but well disguised to look like new. See details:
1. I can tell it's a resealed package from experience; cable is a generic one that tries to mimic the original HTC cable, and it only charges (no data transfer). The charge brick has no film and has micro scratches.
2. Phone has no carrier logo, boot screen has no carrier logo, system has no carrier bloatware. The firmware seems to be unlocked/developer, but the CID(T-MOB010) and MID(0P6B13000) of the phone is T-Mobile!
3. As a brand new phone, it came rooted and S-Off.
4. OTA update fails indicating device has been modified.
3) Coming from a marshmallow phone, I decided to manual upgrade to Android 6. I downloaded the unlocked/developer & T-Mobile RUU from HTC, but both update fails at the black screen with silver HTC logo. (I forgot to mark down the error code, since I'm still a bit rusty from couple of years not digging this deep.)
4) I went ahead and unlocked the bootloader through HTC dev, then performed the same RUU. Same result.
5) I setup adb, then performed CID and MID change to make it the Dev ver. (BS_US002 + 0P6B12000). Ran the same RUU, same result.
6) Then I extracted the zip from the RUU and placed it in the ext sd to flash in hboot. Result was an error of file being too big.
7) I installed TWRP recovery, used it to flash the zip, received error of extraction fail. performed RUU, same result as above, noticed the error 155.
8) Next at fastboot usb, performed command <fastboot flash zip 0P6BIMG.zip> ends up with FAIL and Remote: not allowed message.
9) Finally, I tried RUU mode. Ended with the 32 header error:
Code:
C:\fastboot-win>adb reboot bootloader
C:\fastboot-win>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.031s]
finished. total time: 0.031s
C:\fastboot-win>fastboot flash zip 0P6BIMG.zip
sending 'zip' (1537810 KB)...
OKAY [ 50.275s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 50.415s
C:\fastboot-win>
which according to Sneakyghost's post, he doesn't know what is the cause
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792
I have dug through many xda post and google, but had no luck.
I felt pretty helpless and frustrated now, makes me wonder what is going on with this phone.
This is gonna be my last resort, pls if someone knows what's going on and how to fix this, teach me, Please!
feel free to ask about more info, I will try to explain in further details.
I give you the basic idea as I'm away from my PC.
1. To install the official marshmallow RUU exe, you need to fastboot flash its firmware first.
You should be able to find the official firmware in my thread linked in my signature on post #5
2. To fastboot flash a rom.zip, you need to use htc_fastboot not the generic fastboot which gave you the error.
Read this for 3 options on how to install rom.zip - http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749