Develop Bugs

[Q] WFS CM9 and Reloaded ICS

Hi,
I flashed modpunk's CM9 rom, and tested Reloaded ICS on it.
http://forum.xda-developers.com/showthread.php?t=1531222
When I reboot the phone, it starts to FC all apps.
Did somebody test the couple, and got same issue?
Thanks
Ale

I did the same, without problems. Maybe you can reinstall it?
Sent from my HTC Wildfire S A510e using xda premium

I did it few times already...
Tested also 1.7 release, but no success.
How did you install it? I mean, what did you "clean" from recovery? Dalvik, data...
I see it FC Swiftkey X every time it get loaded, and many other apps.
I'm using Go Launcher and link2SD.

Did you mount the system in recovery mode... it's written in their instructions........ try reflashing your Rom, mount system and then flashing the reloaded ICS package....... this worked for me

I'll try later, flashing rom again and install immediately Reloaded ICS.
What do you mean with "mount the system"? start the phone until it boots?
By the way, I see that when I restart the phone, I get the message of space limit almost reached...
As I said before, I use link2SD, and with rom and Gapps I have about 54 MB free.
It sounds strange

Don't wipe dalvik after install.

aleflocco said:
What do you mean with "mount the system"?
Click to expand...
Click to collapse
I mean mounting the system in recovery mode
To do it,just go to "Mounts and storage" in recovery and select "mount system"

I got it both ways:
- start over, so new rom installation, reloaded ICS and restore all apps
- CM9 installed and fully customized, than install reloaded ICS without clean Dalvik
Just another question, quite nooby, I know...
How to remove it? Just in case

Make a backup before you install it.
Sent from my HTC Wildfire S A510e using xda premium

wrong thread lol! sorry

http://forum.xda-developers.com/showthread.php?t=1531222
Try the latest version frm there. It worked for me
Sent from my HTC Wildfire S A510e using XDA

I have this problem also. Latest CM9 Alpha 3 and latest Reloaded ICS.
I re-flashed CM9 to fix it.

Doesn't work. :X

butlerm205 said:
I have this problem also. Latest CM9 Alpha 3 and latest Reloaded ICS.
I re-flashed CM9 to fix it.
Click to expand...
Click to collapse
I've tried on ALPHA3 version, it's not working on me too...
BTW, i already tried this solutions...
1- mount /system -nothing has changed
2- do not wipe cache -nothing has changed
BTW, is there any other way to get transparent status bar on CM9?

If you read the op of the reloaded ics thread, the dev himself says that it doesn't work with the latest versions of cm9
Sent from my Wildfire S A510e using xda app-developers app

vbhtt said:
If you read the op of the reloaded ics thread, the dev himself says that it doesn't work with the latest versions of cm9
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
I know, what I'm asking is that, CAN SOMEONE MAKE IT WORK WITH ALPHA 3? That'll be awesome.

parasthakur37 said:
I know, what I'm asking is that, CAN SOMEONE MAKE IT WORK WITH ALPHA 3? That'll be awesome.
Click to expand...
Click to collapse
Dev will make it

Liudvis987 said:
Dev will make it
Click to expand...
Click to collapse
He's not, he is on a more awesome preject -he says So we'll have to find some hack or mod to make it work with our device.

BTW, is there any other way to get transparent status bar on CM9?
Click to expand...
Click to collapse

[Q] AOKP JB - restarts itself after turning of screen

Hi all,
I've just installed AOKP as I read a lot of nice thing about it, but either if I push the power button to turn my HOX off (send it to sleep), or let it go to sleep after 30 seconds of inactivity, it reboots automaticaly.
Do you have any idea why?

deadakos said:
Hi all,
I've just installed AOKP as I read a lot of nice thing about it, but either if I push the power button to turn my HOX off (send it to sleep), or let it go to sleep after 30 seconds of inactivity, it reboots automaticaly.
Do you have any idea why?
Click to expand...
Click to collapse
Full wiped before flashing?
Boot.img flashed and erased cache?
Maybe U have to flash boot.img again after flashing rom. Some people reported that this was working for them.

icke said:
Full wiped before flashing?
Boot.img flashed and erased cache?
Maybe U have to flash boot.img again after flashing rom. Some people reported that this was working for them.
Click to expand...
Click to collapse
I've done everything according to the instructions. I double checked md5, flashed boot.img, erased cache, flashed zip. I tried to erase cache after installing the zip also, I tried to flash boot.img after installing zip, etc. I'm completly stuck.
I used to change roms, as I try to find the best one, and I didn't have problems - even bootloop - until AOKP JB.
I'm keen on its battery life and I hate sense so I like to try this rom, but until now it is a complet disaster for me. :/

Try another kernel, like ncx.

Uh, that is what I never tried.
Could you maybe post a link or google is my friend?
Sent from my HTC One X using xda premium

Check under original dev section.
Sent from my HTC One X using xda premium

eyosen said:
Check under original dev section.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Is this kernel suggested for AOKP JB? And what about SlimBean?
[Kernel|05|10][ncx-217_v8_beta2 |UV-C|AOSP|CM|AOKP|SENSE_v7.3 + v.8 beta1|base:2.17|]

Today I tried with ncx kernel and aokp made the same restarts.
Other idea?
Sent from my HTC One X using xda premium

Bricked makes my box bricked also.
Sent from my HTC One X using xda premium

I also tried ncx with slim bean. But on the first screen every touch on my screen makes a phone reboot.
Sent from my HTC One X using xda premium

[Q] where can I get a stable JB 4.1 for CWM T989!

I have been looking all over and my eyes are about ready to have a critical meltdown.
I have a T-Mo T-989 (Hercules) and have been looking for a JB ROM all night and found some shady threads or ROMs that don't work. I dunno, maybe I've installed something wrong, little help here?
Generally the ones that will install get hung up during the initial boot, wtf? Have run across some that wouldn't even install and would abort.
I should say I am using CWM 5.0.2.6... I think, its been so long since I have done anything to this phone so I forget but I know its ither Odin or CWM (or are they both one in the same? x.x ) I've been using Darkside Evolution ICS ROM all this time and would be nice to move up to JB if there is a stable one out there

Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

iburnhearts said:
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hmm, well I got goo manager and its now stuck on the TWRP's boot screen and just reboots after so long of sitting there :/ and its already deleted the rom, so I guess I have to go through the CWM rooting proceeders again?

Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<

i would say, to use twrp and download the latest cm10 Here.
i recommend twrp for stable flashing cause there's bugs in latest cwm...

PorscheHusky said:
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
Click to expand...
Click to collapse
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium

LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app

John imilitym
bzlik88 said:
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
CWR 5027 isn't bad at all it's just that using darkside scripts with certain new recoveries has caused some people boot loops and also with the newer recoveries they aren't required since the built in wipe options work just fine.Personally I use the recovery here http://forum.xda-developers.com/showthread.php?t=1844637
and have had zero issues with it plus it has the darkside scripts built in

Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app

arthurgreeeen said:
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
+1. You can't go wrong with that Rom! I been running it for over a week now with zero complaints
Sent from my SGH-T989 using xda app-developers app

With the v3 sbean I couldn't get my home button to work when I ask tmo twice he didn't respond to my question. I'm looking at slimbean next we'll see how that goes
Sent from my SGH-T989 using xda app-developers app

I would recommend trying either AOKP OFFICIAL Build 5 (not sure if by time you read this if theres a newer one) or a CM10 Nightly. I've tried tons of different JB roms from 4.1 to 4.1.2 and those work good. Decent battery life without changing too many settings (I'm afraid to change too many things because I've hard bricked my phone before but barely got it replaced under the 20 day full exchange warranty). No random reboots or force closes for me so far. Highly recommend trying them out, very simple to flash.

Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app

duckied said:
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
And I haven't had anything go majorly wrong with cm10 since the nightlies went official. I'm on the 10/24 nightly right now.
Sent from my A100 using Tapatalk HD

Nice nice... I wanna test out CMX maybe I'll make a nand backup and check it out
Sent from my SGH-T989 using xda app-developers app

LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Actually... I have CMW6 now the touch one. Does that have something to do with it? The main issue I have with SBean and CM9's JB is eveyrone complains that they can't hear me, that I sound like a robot and the call is badly broken up or that I'm not speaking up like my mic isn't picking up on my voice very well.
Is this a ROM error or a kernel error? rather annoying frankly @[email protected]

Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium

duckied said:
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
This is a sure fix then? This would make me the happiest Porsche Husky on Earth if I could go back to Sbean
The customization features of it are to die for

Ooooo, wait a tic... I feel like such n00b now...
I kept downloading V1 thinking it was the newest one xD I think the V6 at the way bottom is the newest one. I'll try that for a few days then report back.
Edit: QUESTION - my screen is flickering (just installed SBEAN V6)... is that a bad install or did I have to fix permissions?

That pretty common in most JB rom but it usually goes away after few mins for me. You can go to settings and then developer options then disable hw overlay but you would need to do it on every boot because it won't stick after a reboot.
Btw you should check out official aokp-milestone-1 it not on here but Google aokp and download the one for our phone. Its pretty sick and stable.
Sent from my SGH-T989 using xda premium

Q:- So Important Xperia S WiFi Not Working

I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do

How is it not working? You can't acces wifi settings? Scanning doesn't result anything? You can connect but internet still doesn't work? Which kernel are you using?

Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S

Ben36 said:
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
i already did what u said ... and it Just keep searching for networks for hours and nothing Happens.... :S Really i got Mad

Keep In Mind That I Have Backup For Ice cream Sandwich Rom On That Rom WiFi Working Normally
And Installed Nova Kernel... And Nova Rom.... Before Nova I Installed Paranoid and its Kernel and The Same Prop.
What I Have To Do....

That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S

Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app

anadarco7 said:
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Bro I cant Find any module Working.. What To Do???

Ben36 said:
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
OkaY But I Know No One Will Answer Me

Ask in the xsspeed kernel thread as there was definitely a flashable zip of wifi modules in there somewhere. But ages ago
Sent from my Jellybean Xperia S
---------- Post added at 11:26 AM ---------- Previous post was at 11:16 AM ----------
Found this -
http://db.tt/q6pBu6Ub
Sent from my Jellybean Xperia S

Here is the WiFi module link
http://www.sendspace.com/file/56jxga
Flash/paste it to /system/lib/modules
With correct permissions
X X
X
X
Reboot and than report

paste what????

after flashing and coping and fixing i reboot then its stopping on boot animation ... :S

Any 'help???

MaDa.. said:
Any 'help???
Click to expand...
Click to collapse
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app

Jmjguru said:
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
i didnt understand ...

I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S

MaDa.. said:
I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
Click to expand...
Click to collapse
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium

seb_labine said:
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
How May I Change My Baseland....

Ben36 said:
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
I Tried To Clean Install With Out Any More Data Its Same Prop..

X crashes all processes upon startup

Hi Xda,
I was working on putting a custom ROM on my one x as a result of it being slow.
everything started out fine, bootloader was unlocked fairly easy, gaining perm root as well.
however after a couple of tries I haven't been able to get a custom rom working properly. it will start up the system, passed the startup, then as soon as the first start screen opens up, every possible process starts crashing. (the only really visible crash is com.android.phone, however as soon as I click "ok" it will pop-up again within a second)
I've done the following:
Remove lock,
gain root access,
install CWM
downloaded ROM and Gapps (put it on the SD card)
performed a full wipe (Dalvik Cache, factory Reset)
install ROM and Gapps.
after this the problems started occurring.
a few solutions i tried:
1. I've retried the above process and included the boot.img loading using fastboot, then clearing the cache again.
2. I've wiped all possible data using the "superwipescript"
3. tried a different ROM which gave me the exact same errors.
atm i'm getting desperate because I've run out of options.
Is there a workaround for this problem?
Thanks in Advance!

Have you flashed boot.img via fastboot?
Sent from my GT-N8000 using Tapatalk HD

this might be a silly question, but it's not an AT&T one x? there have been a few of those here who shouldn't be here.
if it isn't...then check your HBOOT version

csec said:
Have you flashed boot.img via fastboot?
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
yeah i've flashed the boot.img and then cleared the cache!

jeroen2303 said:
yeah i've flashed the boot.img and then cleared the cache!
Click to expand...
Click to collapse
Does your hboot meet the required version for the ROM You flashed ?
Sent from my GT-N8000 using Tapatalk HD

csec said:
Have you flashed boot.img via fastboot?
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
ace9988 said:
this might be a silly question, but it's not an AT&T one x? there have been a few of those here who shouldn't be here.
if it isn't...then check your HBOOT version
Click to expand...
Click to collapse
No i'm on the international one x (Dutch, T-Mobile)
my HBOOT Version is 1.39.0000
I've tried installing Paranoid Android 3.10 and 3.15 and ICJ422
Is that the correct version?

jeroen2303 said:
No i'm on the international one x (Dutch, T-Mobile)
my HBOOT Version is 1.39.0000
Is that the correct version?
Click to expand...
Click to collapse
Yes. You have the latest hboot.
You may wait for more expert replies.
Sent from my GT-N8000 using Tapatalk HD

csec said:
Yes. You have the latest hboot.
You may wait for more expert replies.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
I've tried waiting with installing the Gapps till after the first boot but the same problem keeps occurring.
any other advice?

jeroen2303 said:
I've tried waiting with installing the Gapps till after the first boot but the same problem keeps occurring.
any other advice?
Click to expand...
Click to collapse
Reboot into recovery and under advanced, select fix permissions.
Sent from my GT-N8000 using Tapatalk HD

csec said:
Reboot into recovery and under advanced, select fix permissions.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
tried but won't work!

Make a clean wipe manually twice
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the rom

Mr Hofs said:
Make a clean wipe manually twice
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the rom
Click to expand...
Click to collapse
I've tried the above but it gives the same exact error. as soon as the systems has started up it gives: "Unfortunately, the process com.android.phone has stopped" when i press ok there is a second error about messages but i'm not able to read this since the first message will pop up again.
should I start to get worried by now?

jeroen2303 said:
I've tried the above but it gives the same exact error. as soon as the systems has started up it gives: "Unfortunately, the process com.android.phone has stopped" when i press ok there is a second error about messages but i'm not able to read this since the first message will pop up again.
should I start to get worried by now?
Click to expand...
Click to collapse
Do you get this on all ROMs??
Try using a Sense ROM....
Sent from my HTC One X using xda app-developers app

Boot the phone without the simcard....

athulele said:
Do you get this on all ROMs??
Try using a Sense ROM....
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I've tried using a Sense ROM without success. I Can't seem to get passed the HTC ONE logo.
as for the simcard, i've tried booting inserted and left out but none of the two work..

jeroen2303 said:
I've tried using a Sense ROM without success. I Can't seem to get passed the HTC ONE logo.
as for the simcard, i've tried booting inserted and left out but none of the two work..
Click to expand...
Click to collapse
Flash the boot.img from the sense ROM.zip.. and then fastboot erase cache...then it won't be stuck at HTC logo...
Which roms did your try??? :S
I was having the same problem on Paranoid Android... not all the time like you but 4-5 times a day... Changed to ICJ and everything is stable now! Also make sure you have flashed the proper gapps...

jeroen2303 said:
I've tried using a Sense ROM without success. I Can't seem to get passed the HTC ONE logo.
as for the simcard, i've tried booting inserted and left out but none of the two work..
Click to expand...
Click to collapse
I gave the phone a good hour and my phone seems to be working for now!
Thanks for all the help,
This is on a sense ROM!

Hmmm! Good to hear that m8!

vin4yak said:
Hmmm! Good to hear that m8!
Click to expand...
Click to collapse
felt only happy for a while, but back to problems now.
the ROM takes an hour to boot on average and won´t let me make any calls. besides the settings menu will crash as soon as I try to open anything.
I´m going to try another Sense based ROM now and will see what happens next!

jeroen2303 said:
felt only happy for a while, but back to problems now.
the ROM takes an hour to boot on average and won´t let me make any calls. besides the settings menu will crash as soon as I try to open anything.
I´m going to try another Sense based ROM now and will see what happens next!
Click to expand...
Click to collapse
Maybe this could help you: http://forum.xda-developers.com/showpost.php?p=40817031&postcount=42