Develop Bugs

[Q] Please Help! Looping

Ok... here's the deal. I just decided to switch roms finally to see what is new out there. I had been running an old version of Uber Kingdom. Here is the problem I am having. It is boot looping. Relatively simple problem to fix usually. But wait, there's more! It is boot looping in every single rom I install. Sometimes it won't boot to clockwork properly either and I have to pull the battery. Is there someway I can fix this? Or is this a hardware problem (which I kind of doubt)? I just don't understand what the heck is going on. I have been flashing different roms left and right for the past few hours trying to get this thing to stabilize. Sometimes it will boot up into the rom, I will get mostly through the google accounts setup, and then it will restart, and then loop. Other times it won't even get past the white incredible screen, and then sometimes it will make it into the rom splash screen. I have attempted to install CM7 nightly, Uber kingdom, and Synergy so far. I can flash the new rom, I can mount the SD card in clockwork, but then it begins to loop again as soon as I leave clockwork.
Let me know if you need any other information.
Is there a way to just completely redo EVERYTHING, clockwork, rom, everything, just to make sure I have a nice clean slate?
Thanks a ton for reading through this novel. I am extremely frustrated.
~Will
PS, I may not get back to this thread until morning. I have to get to sleep for work. Sorry if I don't respond right away to information requests. Thanks again!

If you can mount the SD card, download the stock RUU from www.dougpiston.com, put it on the root of the SD card named exactly PB31IMG.zip, and boot into hboot to install it. Your phone should be restored to stock, a clean slate.

Tried a different SD?
Sent from my ADR6300 using XDA Premium App

How are you downloading and flashing the ROM? I had this problem when trying to do everything through Rom Manager. Even trying to flash in recovery with a ROM downloaded through ROM Manager would loop.

Update
Well, I was just getting ready to flash the original RUU when I tried one last time to restore my old Uber rom setup and it worked (whereas the last 3 times of doing exactly the same process didn't). It stopped looping at least, even though I am still running the same rom I was before. I think tonight I am still going to attempt to flash the RUU anyway and start over anew.
To answer the questions before, No, I did not try a different SD. I didn't know it could make that much difference. Still on the original one that came with the phone.
As the downloading and flashing process goes, I was downloading direct from the XDA forums on my laptop, then transferring the files via USB. I have never really liked using the Rom Manager. It cuts me out of the XDA loop and I don't get to see all the bleeding edge discussions, etc...
So I will try to flash everything new tonight, and then post my results for anyone who is curious. Thanks for the help guys!

HELP! I rooted my phone and not touchwiz is gone

Hello,
Last night I rooted my device using this (http://forum.xda-developers.com/showthread.php?t=1265429) method and file from zedomax and everything worked great except when I booted my device there was a yellow triangle with a black “!” in it. I figured that just indicated the device was rooted or running a 3rd party kernel so I didn’t worry about it.
Today I launched my camera app and it failed to load the interface but showed the image from the camera momentary then crashed back to the home screen. I restarted my device and when the device restarted it was very slow and unresponsive and after unlocking it my live wallpaper was gone replaced with the last background I used before selecting a live background a couple weeks back. No icons or widgets loaded and I am unable to open the settings tray. The only things I am able to do with the phone is pull down the notification bar, respond to text messages, adjust the volume and hold power to restart the phone. All of which are very slow and delayed.
When I connect the device to my computer windows is no longer able to load the drivers and Kies is unable to connect with the device. I am not sure what caused this or how to resolve this issue so any advice or known fixes would be fantastic! I am unable to get to clockwork mod to restore my backup and I am unable to get to Kies or the phone settings to do a factory reset so I really don’t know what to do they were supposed to be a last resort and now I don’t even think I can do them. I am an experienced techie but I am new to android and this is the first device I have rooted so any advice would be great no matter how basic it may be.
UPDATE: I just connected the phone via USB to my laptop at work and it was able to discover and install everything it needed to connect with the phone. I am installing Kies now so at least there is hope of a factory restore, although I really hope it doesn't come to that!

Boot into download mode and flash the stock eg30 tar file from crawrj.
Sent From My Evo Killer!!!

Thanks Already started doing that waiting for it to download now

Still no touchwiz... great!

Try flashing a stock rom via clockworkmod.

efarley said:
Still no touchwiz... great!
Click to expand...
Click to collapse
You can root again and restore your backup, or go to this website www.lostandtired.com (midnight roms blog) click on android development and download and flash the sprint bloat and TW restore zip. Hope that helps.

I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.

efarley said:
I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.
Click to expand...
Click to collapse
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.

dallastx said:
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.
Click to expand...
Click to collapse
Ohhhh that's what happened! Awesome thanks. I will be much better prepared with backups out the wazoo this time haha.
Now if only I could figure out why Touchwiz died in the first place hmmm....

I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.

Khilbron said:
I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.
Click to expand...
Click to collapse
haha SPRINT removed it?! So that person thinks sprint monitors every device and has a team of techies on staff to hack your phone and brick it if you break their rules?... yeah that totally makes more sense than a file got corrupted when you were messing with the kernel.. some people maybe shouldn't be rooting their devices in the first place haha

Samsung Galaxy S4 Problem

Hello everyone,
I really need your help with my wife's Metro PCS Samsung GS4 M919N.
The thing is, we are now living outside the US so I had to unlock her phone. After ordering the unlock codes, I decided to root the phone and use a custom ROM while waiting for the codes.
That is why I found this guide here: androidforums.com/metropcs-galaxy-s4-all-things-root/790899-metropcs-galaxy-s4-all-things-root-guide.html
So while reading the guide, I aimed to have the following accomplished at the end:
Recovery: TWRP
Custom ROM: CyanogenMod 10.2.1
I then started doing the guide for the TWRP recovery by using Odin. I got the message saying that the flashing passed and went ahead to restart to recovery to install CM 10.2.1 as a custom ROM. The thing is that I keep on restarting to the stock recovery not TWRP. So I went to YouTube and found a video showing how to flash TWRP using GooManager. After following that guide, I went to restart to recovery and I successfully got into TWRP.
Now, to achieve my goal, all that's left to do is to flash CyanogenMod 10.2.1 (jfltetmo).
Before doing that, I decided to make a backup. After using TWRP to do a backup, I proceeded to installing the custom ROM + gapps (wiped with the default settings). Everything was working I think (I handed the phone to my wife so she was he one testing it). After some time, she decided she wants the stock ROM instead so I decided to download the androidforums.com/metropcs-galaxy-s4-all-things-root/783769-rom-recovery-flash-able-stock-m919nuvuamf2-rooted-deodexed-rom.html ROM.
I flashed the newly downloaded ROM + gapps (same file). This time, I couldn't get the gapps to work probably because it was meant for another version. So I decided to just restore from the backup I created earlier.
So, the usual stuff. Wipe. Restore. Restart.
Seems to be going smoothly because my wife was happy to see the old ROM she was used to.
Until the phone started to restart on it's own. (It's pretty much downhill from here on out).
At first I thought it was just a random thing that probably would never happen again. I was wrong as it became more frequent as days went by.
Recently I can't just restart the phone, I would have to remove the battery and then restart it. Now, it's getting really hard to restart the phone. Please help me fix this. I prefer to leave the phone rooted, but if the fix unroots the phone then so be it, anyway my wife prefers the stock ROM so only the unlocking was necessary.
Metro PCS Samsung Galaxy S4 M919N
Recovery:
TWRP 2.6.3.1
ROMs:
Stock Metro PCS
CyanogenMod 10.2.1
Let me know if you need more information from me. Hopefully I can restart the phone so I can give you some version numbers.
Thanks everyone!

I didn't read everything but just wanted to say
VERY GOOD THREAD!
this is how threads should be done. Very descriptive, organized, told us everything you did and asked for help! Good job man! Only negative is it prolly should have gone in Q&A section but irregardless very good thread!
About your issue, I recommend flashing stock Odin tar file to everything back to stock and reroot and start over. Flashing stock will not lock it again it will remain unlocked. But should get you back up and fresh. Just be aware it will erase all your data and all of the internal SD card.
Sent from my SGH-M919 using Tapatalk

dokgu said:
Hello everyone,
I really need your help with my wife's Metro PCS Samsung GS4 M919N.
The thing is, we are now living outside the US so I had to unlock her phone. After ordering the unlock codes, I decided to root the phone and use a custom ROM while waiting for the codes.
That is why I found this guide here: androidforums.com/metropcs-galaxy-s4-all-things-root/790899-metropcs-galaxy-s4-all-things-root-guide.html
So while reading the guide, I aimed to have the following accomplished at the end:
Recovery: TWRP
Custom ROM: CyanogenMod 10.2.1
I then started doing the guide for the TWRP recovery by using Odin. I got the message saying that the flashing passed and went ahead to restart to recovery to install CM 10.2.1 as a custom ROM. The thing is that I keep on restarting to the stock recovery not TWRP. So I went to YouTube and found a video showing how to flash TWRP using GooManager. After following that guide, I went to restart to recovery and I successfully got into TWRP.
Now, to achieve my goal, all that's left to do is to flash CyanogenMod 10.2.1 (jfltetmo).
Before doing that, I decided to make a backup. After using TWRP to do a backup, I proceeded to installing the custom ROM + gapps (wiped with the default settings). Everything was working I think (I handed the phone to my wife so she was he one testing it). After some time, she decided she wants the stock ROM instead so I decided to download the androidforums.com/metropcs-galaxy-s4-all-things-root/783769-rom-recovery-flash-able-stock-m919nuvuamf2-rooted-deodexed-rom.html ROM.
I flashed the newly downloaded ROM + gapps (same file). This time, I couldn't get the gapps to work probably because it was meant for another version. So I decided to just restore from the backup I created earlier.
So, the usual stuff. Wipe. Restore. Restart.
Seems to be going smoothly because my wife was happy to see the old ROM she was used to.
Until the phone started to restart on it's own. (It's pretty much downhill from here on out).
At first I thought it was just a random thing that probably would never happen again. I was wrong as it became more frequent as days went by.
Recently I can't just restart the phone, I would have to remove the battery and then restart it. Now, it's getting really hard to restart the phone. Please help me fix this. I prefer to leave the phone rooted, but if the fix unroots the phone then so be it, anyway my wife prefers the stock ROM so only the unlocking was necessary.
Metro PCS Samsung Galaxy S4 M919N
Recovery:
TWRP 2.6.3.1
ROMs:
Stock Metro PCS
CyanogenMod 10.2.1
Let me know if you need more information from me. Hopefully I can restart the phone so I can give you some version numbers.
Thanks everyone!
Click to expand...
Click to collapse
I agree with Elesbb. If the goal is jus tto get back to stock, just do an odin flash of the stock ROM. Be advised if you flash the latest Kit Kay update you will nto be able to go back to Jelly Bean. From your post it seems like you are partial to Jelly Bean. So if that's what you want, but sure you use the stock 4.3 ROM. You can find it around here on XDA somewhere with a quick search to make sure you have the right one.
As Elesbb said, you won't loose the 'sim unlock'. But you will lose root. However you can root the stock ROM just fine.
You might also consider one of the myriad of TouchWiz based custom ROMs. They are look just like TouchWiz that your wife wants, but have a lot of optimizations and options in them. Those should flash just like any ROM. If you still get the reboot issue then do the Odin back to stock, reroot, then flash the custom TW roms.
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------

Thread cleaned.
Rather than bashing a ROM or user let's keep on topic and help the OP resolved the problems he's having. Arguing over the virtues of a ROM doesn't help anyone.
Thank you,
Rwilco12

Before posting this thread I sent the aforementioned guide's poster (arocker). He sent me a reply saying not to use gapps as the stock ROM for Metro PCS already comes with Google apps. I'll try his suggestion first and see if the phone still reboots a lot.
If the problem persists, I will try the solutions mentioned here. Thanks a lot!

elesbb said:
I didn't read everything but just wanted to say
VERY GOOD THREAD!
this is how threads should be done. Very descriptive, organized, told us everything you did and asked for help! Good job man! Only negative is it prolly should have gone in Q&A section but irregardless very good thread!
About your issue, I recommend flashing stock Odin tar file to everything back to stock and reroot and start over. Flashing stock will not lock it again it will remain unlocked. But should get you back up and fresh. Just be aware it will erase all your data and all of the internal SD card.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
After trying arocker's suggestion to not flash gapps, the phone still reboots. So now, I am going to try your solution guys.
But before I do, I want to make sure that I am on the correct paths/links.
Here's what I found for the following:
ODIN
forum.xda-developers.com/galaxy-s3/themes-apps/27-08-2013-odin-3-09-odin-1-85-versions-t2189539
I've had a couple of chances to use ODIN but only using specific functions like flashing a recovery file while the phone is in download mode. I don't however have any experience using ODIN to put the phone back to stock where the phone gets unrooted. Having the phone unrooted is fine by me as I only needed to have the phone unlocked.
Any step-by-step guides for using ODIN for this specific purpose guys? I don't want to mess this up again.
Thanks and sorry for the trouble.

dokgu said:
After trying arocker's suggestion to not flash gapps, the phone still reboots. So now, I am going to try your solution guys.
But before I do, I want to make sure that I am on the correct paths/links.
Here's what I found for the following:
ODIN
forum.xda-developers.com/galaxy-s3/themes-apps/27-08-2013-odin-3-09-odin-1-85-versions-t2189539
I've had a couple of chances to use ODIN but only using specific functions like flashing a recovery file while the phone is in download mode. I don't however have any experience using ODIN to put the phone back to stock where the phone gets unrooted. Having the phone unrooted is fine by me as I only needed to have the phone unlocked.
Any step-by-step guides for using ODIN for this specific purpose guys? I don't want to mess this up again.
Thanks and sorry for the trouble.
Click to expand...
Click to collapse
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.

PanchoPlanet said:
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
Click to expand...
Click to collapse
Hello PanchoPlanet,
Thanks for the link. I went ahead and tried to unroot without Windows (Mobile Odin) as per the instructions on the link. I downloaded everything and went ahead to install the Mobile Odin APK. When I ran it to install the Flash Kernel, the app told me that the device is not supported.
To my understanding the guide is for M919 devices but should work for my wife's device as well (M919N - Metro PCS). I would like to try the guide for using Windows but I'm not really expecting for it to work or I might mess it up more. I'll try to search some more and provide the links where this forum will lead me to. But if you have any ideas, please let me know asap. Thanks!

PanchoPlanet said:
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
Click to expand...
Click to collapse
Ok, here's what I found:
forum.xda-developers.com/showthread.php?t=2446497
It seems like the perfect thread for what I am trying to achieve. Will let you guys know if it is successful. But it will have to wait for tomorrow. Gonna catch some sleep.

Okay, I'm running out of options. I was able to flash the stock ROM using Odin 3.07. The recovery looks like it came back to the stock recovery as I no longer have TWRP installed. When I install Root Checker, I see that I am no longer rooted. That's good.
But my original problem is still here. The phone reboots a lot. The phone is so unstable that it is barely usable.
I am now going to try one more thing.
I have a Galaxy S4 (I337M) from Rogers Canada (my wife has Metro PCS M919N). Mine got rooted and has CyanogenMod 10.2.1 as a custom ROM. My phone is working perfectly while hers reboots a lot. I was thinking it was because of a faulty battery. So I am doing an experiment by swapping the batteries. So far no reboots have occurred, but I will continue to monitor this.
Any ideas why the battery is kinda messed up?

This thread talks about battery stuff and reboots:
http://au.ibtimes.com/articles/530338/20131216/samsung-galaxy-s4-problems.htm
Batteries can go bad a lot of ways. Extreme temperature, factory defect, phone drops, moisture, etc.
Sent from my SGH-M919 using XDA Premium 4 mobile app

Android_Monsters said:
This thread talks about battery stuff and reboots:
http://au.ibtimes.com/articles/530338/20131216/samsung-galaxy-s4-problems.htm
Batteries can go bad a lot of ways. Extreme temperature, factory defect, phone drops, moisture, etc.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And 100% of the time, they eventually just get old.

dokgu said:
Okay, I'm running out of options. I was able to flash the stock ROM using Odin 3.07. The recovery looks like it came back to the stock recovery as I no longer have TWRP installed. When I install Root Checker, I see that I am no longer rooted. That's good.
But my original problem is still here. The phone reboots a lot. The phone is so unstable that it is barely usable.
I am now going to try one more thing.
I have a Galaxy S4 (I337M) from Rogers Canada (my wife has Metro PCS M919N). Mine got rooted and has CyanogenMod 10.2.1 as a custom ROM. My phone is working perfectly while hers reboots a lot. I was thinking it was because of a faulty battery. So I am doing an experiment by swapping the batteries. So far no reboots have occurred, but I will continue to monitor this.
Any ideas why the battery is kinda messed up?
Click to expand...
Click to collapse
That's a wierd situation, by swapping batteries you basically performed a battery pull, which acts as a reset, that in it self may have cleared your issue.
Now if battery is bad that could be an unusual problem. Maybe just replacing the battery will be the end of your mystery.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)

The battery should be brand new as the phone was just recently purchased this April.
Anyways, so far no reboots have happened and any instability has not been shown at all. Everything looks ok, yet.
Anyone know if it is safe to swap batteries? Our phones have different S4 models. I'm not sure what the implications would be. Also what is this battery pull which acts as a reset? We've been pulling the battery a lot of times but the reboot still happens but not when we swapped batteries.

The batteries are all the same. Don't worry about that.
Even if its a new battery if could have just been bad. A manufacturing defect perhaps.
Sent from your phone. You should be more careful where you leave that thing.

dokgu said:
The battery should be brand new as the phone was just recently purchased this April.
Anyways, so far no reboots have happened and any instability has not been shown at all. Everything looks ok, yet.
Anyone know if it is safe to swap batteries? Our phones have different S4 models. I'm not sure what the implications would be. Also what is this battery pull which acts as a reset? We've been pulling the battery a lot of times but the reboot still happens but not when we swapped batteries.
Click to expand...
Click to collapse
This battery thing is wacky, anyway swapping batteries should not be a problem, it's just an energy storage container. Pulling the battery isn't like powering down the phone or resetting/rebooting ,sometimes devs request a battery pull to get the proper wipe effect that reboots can't provide.
You inadvertently solved your problem by accident. That's a good thing.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)

PanchoPlanet said:
You inadvertently solved your problem by accident. That's a good thing.
Click to expand...
Click to collapse
I have quite literally solved the vast majority of my problems this way.
Its a preferred method.
Sent from your phone. You should be more careful where you leave that thing.

Sometimes it's that "total disconnect "of power that kind of gets all the ducks lined up in a row and everything flows in the dynaflow.
Good.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)

its very important topics and it might seen for every galaxy s4 users.just wonderful topics.

This exact same thing happened on my mother's 6-month old S3. If you're still wondering, you could try putting the old battery and running a CPU stress test app. It should increase the current draw and trigger a shutdown.
EDIT: whoops, sorry to kind of zombie. Didn't check the date.
Sent from my Galaxy S4

PLEASE HELP!! Can't Restore and NO Signal when flashing any rom and more!

Hey everyone, I'm Having trouble with tons of issues with my Sprint note 2 that came with version 4.4.2.
I've been struggling for weeks trying to fix this on my own so any help will be EXTREMELY appreciated.
Here's the problem:
-EVERY TIME i make a backup of ANYTHING it does not restore. I sit there waiting on the load up screen for over an hour about 6 times now. I have TWRP version 2.7.0.0 because the 2.7.1.0 does not work and will not work for me for some reason. To fix it i have to flash the complete stock rom on it like it comes from the factory with odin. Then i have to root the phone again and try it all over again. Please if anyone has any idea whats going on here please help!.. i tried recovering with almost every option and i cant find help anywhere! :crying:
-Now this is a big problem. Since i cant recover from my backup when i flash a new rom it is taking a lot of my time. i flash a rom to my device and every time i have no signal. Like i flashed Omni and Liquidsmooth for example and they work perfectly! except i have no signal!.. I've read some forums and they said to type in some numbers to call and reset your phone for latest Profile and crap but it says no signal obviously so i cant call anything. What I'm wondering here is if there is a fix to my problem. I flash my phone to stock every single night after i try and work on it for hours and hours so i can have service the next day at least. I've been doing this for 2 weeks straight and i'm kinda getting sick of it. And if i call sprint support to help get signal back to my device would i get in trouble or something because i'm using a custom rom? so they would most likely not help me?
-I also have an issue with my Sprint Airwave as when i root my phone or flash a rom it immediately stops working! I'm not to worried about that as much as the other issues i have . But i thought i would just throw that out there!
I hope someone knows some of these problems. Like i said ANY help will be greatly appreciated.
Please look into this issue for me as i have spent way to much time on this and i just want a rom on my dang phone ... Thanks for your time!

Have you tried using Philz Recovery instead of TWRP?
ANDROID...A New Digital Revolution Of Incredible Developers

askills said:
Hey everyone, I'm Having trouble with tons of issues with my Sprint note 2 that came with version 4.4.2.
I've been struggling for weeks trying to fix this on my own so any help will be EXTREMELY appreciated.
Here's the problem:
-EVERY TIME i make a backup of ANYTHING it does not restore. I sit there waiting on the load up screen for over an hour about 6 times now. I have TWRP version 2.7.0.0 because the 2.7.1.0 does not work and will not work for me for some reason. To fix it i have to flash the complete stock rom on it like it comes from the factory with odin. Then i have to root the phone again and try it all over again. Please if anyone has any idea whats going on here please help!.. i tried recovering with almost every option and i cant find help anywhere! :crying:
-Now this is a big problem. Since i cant recover from my backup when i flash a new rom it is taking a lot of my time. i flash a rom to my device and every time i have no signal. Like i flashed Omni and Liquidsmooth for example and they work perfectly! except i have no signal!.. I've read some forums and they said to type in some numbers to call and reset your phone for latest Profile and crap but it says no signal obviously so i cant call anything. What I'm wondering here is if there is a fix to my problem. I flash my phone to stock every single night after i try and work on it for hours and hours so i can have service the next day at least. I've been doing this for 2 weeks straight and i'm kinda getting sick of it. And if i call sprint support to help get signal back to my device would i get in trouble or something because i'm using a custom rom? so they would most likely not help me?
-I also have an issue with my Sprint Airwave as when i root my phone or flash a rom it immediately stops working! I'm not to worried about that as much as the other issues i have . But i thought i would just throw that out there!
I hope someone knows some of these problems. Like i said ANY help will be greatly appreciated.
Please look into this issue for me as i have spent way to much time on this and i just want a rom on my dang phone ... Thanks for your time!
Click to expand...
Click to collapse
I've had this same problem, I know a bit about flashing custom roms, but only cause i've learned through trial and error. I also have a note 2 on sprint, the L-9000. What I done was found a stock, or close to stock (something was changed cause it shows as custom in my phone instead of stock). that got my signal working again. But what I have read (and anyone that knows more than I do, which is going to be alot of people here, feel free to correct me) is, it has to do with your APN settings which seems to be telling the phone how to interact with the towers. so here is how I would handled it (if there are any devs that disagree by all means enlighten the both of us on this issue)
1. if you haven't already, get a custom boot loader like Clock Work Mod
2. flash stock rom
3. re-boot to boot loader
4. make back up of phone in functioning state and then copy over to your computer
5. download custom roms and tinker away. if you ever brick the phone or mess up and have no service, load the backup from step 4.

Need help wiping EVERYTHING!!!

Okay this is really getting on my nerves and I've never had this much problem from a phone. I've been modding and helping develop for years, but I've never had this issue. So for five days now, I've been playing around with my old DINC that my daughter messed up somehow, and I can't install a ROM and make it work to save my life. I've run countless ROM's on this thing in the past with no issues. The problem now is, no matter what recovery I use or what I wipe, all of the old apps keep showing up on boot and crashes the phone. Meaning while it says "Android is upgrading" it shows every app that has ever been installed on this phone, even though I wipe and format every partition, and I haven't installed a single app. Heck... I can't even get into the system to install an app. The furthest I've gotten on a clean install is to pick a launcher in Carbon, but then it reboots.
Someone please help with a solution if you know one. I would hate to make a mess on the concrete outside with this phone, but I'm almost to that point. Thank you in advance!

ludeawakening said:
Someone please help with a solution if you know one. I would hate to make a mess on the concrete outside with this phone, but I'm almost to that point. Thank you in advance!
Click to expand...
Click to collapse
What recovery are you running?
I've been using CWM 5.0.2.0 since 2011 and haven't had an issue, and I still flash things on it. I found an active mediafire link with it from a post on Rootzwiki that is flashable through HBOOT. Just put it on the root/top level of an SD card formatted FAT32 and it will load the recovery image, press volume up to flash it, then you should be on an up to date recovery and you can try wiping from there. I had issues with some of the older ones and TWRPs earlier versions.
I'd also recommend CyanogenMod 7.2 stable, but that's just what I've ran the last few years. Never had an issue with it and it is stable as can be. Always a good start. In fact, it's more stable than stock on my phone, plus I over clock a bit.
It's a good device to have around when you have to send in your current device for exchange or damage it etc. I used it full time not long ago while exchanging my M8.

BrettApple said:
What recovery are you running?
I've been using CWM 5.0.2.0 since 2011 and haven't had an issue, and I still flash things on it. I found an active mediafire link with it from a post on Rootzwiki that is flashable through HBOOT. Just put it on the root/top level of an SD card formatted FAT32 and it will load the recovery image, press volume up to flash it, then you should be on an up to date recovery and you can try wiping from there. I had issues with some of the older ones and TWRPs earlier versions.
I'd also recommend CyanogenMod 7.2 stable, but that's just what I've ran the last few years. Never had an issue with it and it is stable as can be. Always a good start. In fact, it's more stable than stock on my phone, plus I over clock a bit.
It's a good device to have around when you have to send in your current device for exchange or damage it etc. I used it full time not long ago while exchanging my M8.
Click to expand...
Click to collapse
I've tried every recovery you can think of for this device. All versions of the CWM and TWRP touch and non-touch, including CWM 5.0.2.0. And I use HBOOT to flash all of the recoveries. It doesn't matter what ROM or recovery I flash, I still get the same results. And the ROM I used the most on this phone was Condemned CM7.2, but like I said, it won't matter how stable a ROM is, I can't get it to boot to even use it now. For some reason there is a partition somewhere that will not wipe. I've used VR Superwipe, which was recommended on some ROM's in the past, but it doesn't help at all either. No matter what, while booting for the first time, it still shows every app that has ever been installed to this device over the years, which causes everything to crash or just immediately reboot. All of the apps crash even if I go back completely stock by flashing a PB31IMG of stock firmware with HBOOT. That includes trying it with S-ON and S-OFF. As you can tell, this isn't my first rodeo at all. Lol
I've been doing this for years and have helped develop ROM's on a couple of sites, but I've never seen or heard of anything like this. Thanks for the input though.
I guess I'll risk completely bricking it, and manually re-partition the device and push the bootloader and everything else to it with ADB Shell. I've got nothing to lose, it's already a paperweight that just lights up. Haha

ludeawakening said:
No matter what, while booting for the first time, it still shows every app that has ever been installed to this device over the years, which causes everything to crash or just immediately reboot.
Click to expand...
Click to collapse
Sounds like a bad NAND to me (like one partition is fried and is now read-only). Good luck with the repartitioning. If you're feeling adventurous, you could try this. If you're feeling really adventurous, I seem to remember reading a post from someone who had actually unsoldered the NAND chip and got the phone to boot using only an sdcard. I can't find the post right now though.