Hi,
Today i builded the touch recovery 6 as i tought it would be a nice adition to our phone.
It's made for jelly bean sense only!
Please try and report how it works for you!
PLEASE REMEMBER, I am not responsible for ANY kind of damage. You are responsible for what you're doing with your device, not me... So dont blame me, if you screw it up
Credits go to:
Badnewzz for boot.img
All makers and contributors of: http://builder.clockworkmod.com/
Changelog : initial release .
Download :http://www.mediafire.com/?1apw0bt77251s12
Video:
http://youtu.be/t8UuS6pSa8I
Great news
Where's the video ??
frooss said:
Great news
Where's the video ??[/QUOTE
http://youtu.be/t8UuS6pSa8I
Click to expand...
Click to collapse
Why exactly is a recovery ROM/Android version specific?
Dunc001 said:
Why exactly is a recovery ROM/Android version specific?
Click to expand...
Click to collapse
Exactly my question.
DiederikC said:
Hi,
Today i builded the touch recovery 6 as i tought it would be a nice adition to our phone.
It's made for jelly bean sense only!
Please try and report how it works for you!
PLEASE REMEMBER, I am not responsible for ANY kind of damage. You are responsible for what you're doing with your device, not me... So dont blame me, if you screw it up
Credits go to:
Badnewzz for boot.img
All makers and contributors of: http://builder.clockworkmod.com/
Changelog : initial release .
Download :http://www.mediafire.com/?1apw0bt77251s12
Video:
http://youtu.be/t8UuS6pSa8I
Click to expand...
Click to collapse
So you made CWM 6 with touch! Awesome! It does have all CWM 6 features right?
Sent from my HTC One X using xda premium
Its touch anyway isnt it? Is for me anyway.
And it really shouldnt be rom specific
Not working for me. gives a lot of errors at start (about cache etc), can't install zip because "Can't mount /sdcard/"
edit.: also twrp and prew. CWM are not working. maybe my device is dying. (
backfromthestorm said:
Its touch anyway isnt it? Is for me anyway.
And it really shouldnt be rom specific
Click to expand...
Click to collapse
The CWM 6 I have isn't touch :S Could you link to the touch version?
Sent from my HTC One X using xda premium
All, you have to use the fastboot command to flash while your phone is in fastboot mode.
Sent from my HTC One X using Tapatalk 2
it's just a test version i'll make it better soon did it work good for any one?
DiederikC said:
it's just a test version i'll make it better soon did it work good for any one?
Click to expand...
Click to collapse
are the USB Mass Storage working?
jamm513 said:
are the USB Mass Storage working?
Click to expand...
Click to collapse
not yet i'm working on it
nothing working here also..just navigation through the program...like a demo version lol...
zopostyle said:
nothing working here also..just navigation through the program...like a demo version lol...
Click to expand...
Click to collapse
ok i'm up to a new release: )
with fixed touch and all functions should work.
great ... thanks ...
so with the currently posted version...USB mount works? ADB too?
are there any known problems I should be aware of?
---------- Post added at 10:25 AM ---------- Previous post was at 09:34 AM ----------
OK...just tried it...notthing mentioned as fixed is working so version in OP is outdated still...reverting back to 5.8.4.0
Man,keep workin on this!! I had a screen replacement on my One X and every recovery i tried showed the black screen,but not yours! Yours is only that works nice with screen replacement phones !
Now It can't flash roms and do staf but i belive that it would work 100% so far
Wow! So this is why you are so silent? Mind to put bug list?
Sent from my HTC One X using Tapatalk 2
Hi,
here is my first test.
mount SDCard: doesn't work
adb: doesn't work
usb flash device: doesn't work
cheers
starbase64
Related
For anyone who doesn't look at the VillainROM forums often, I thought I'd post the updated kernels I have made for some of the ROMs.
More to follow, and this is OPTIONAL, and at your own risk. It should fix green camera issue.
http://www.villainrom.co.uk/viewtopic.php?f=24&t=662
(I post a link off-site to save me updating too many places and missing one. Just click the links to download - you don't need to be registered)
Flash these like any update.zip
P
This is behnaam's Ben#8 kernel (sorry, I forgot, as I typed this up as i was leaving the house)
Can I use this kernel with VanillaEclair? Or only for Villain stuff only?
villainrom 5.5.0 - no green on camera CONFIRMED - working for me.
thanks
Dude, you made my day. A camera fix exactly on the day of my first outdoor dance festival.
I was on Chronos but moving back to villain as we speak.
Thanks a lot m8
are those OC enabled?
anon2122 said:
For anyone who doesn't look at the VillainROM forums often, I thought I'd post the updated kernels I have made for some of the ROMs.
More to follow, and this is OPTIONAL, and at your own risk. It should fix green camera issue.
http://www.villainrom.co.uk/viewtopic.php?f=24&t=662
(I post a link off-site to save me updating too many places and missing one. Just click the links to download - you don't need to be registered)
Flash these like any update.zip
P
Click to expand...
Click to collapse
Would be nice if u told where the kernel came from
Just tried the Villain 5.5 version on BeHero+1.2........failed.
reboot all the time...
so sad....
behnaam said:
Would be nice if u told where the kernel came from
Click to expand...
Click to collapse
Yeah. 'BenKernel8-signed.zip' said enough..
So, we allready have a thread for this new kernel.
behnaam said:
Would be nice if u told where the kernel came from
Click to expand...
Click to collapse
Corrected post. Sorry mate I did it as i was literally leaving the house
rankjie said:
Just tried the Villain 5.5 version on BeHero+1.2........failed.
reboot all the time...
so sad....
Click to expand...
Click to collapse
These are made up ONLY for Villain folks. Sorry It isn't compatible with other ROMs
thanks, confirm remove green in camera, and phone response is more fast
Sent from my HTC Hero using the XDA mobile application powered by Tapatalk
Is there a new kernel for Vanillain3.0 (CyanogenMod5)
Cheers
Demologic said:
Is there a new kernel for Vanillain3.0 (CyanogenMod5)
Cheers
Click to expand...
Click to collapse
Yeah. I am just finishing packaging it just now folks. Bear with me. I'll also do one for Slide
rrhg said:
thanks, confirm remove green in camera, and phone response is more fast
Sent from my HTC Hero using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Don't thank me - thank behnaam. I just repackaged his kernel and module. He is the one who fixed this. I just 'borrowed' it
Thanks . good work
anon2122 said:
Yeah. I am just finishing packaging it just now folks. Bear with me. I'll also do one for Slide
Click to expand...
Click to collapse
Sorry to quote oneself, but Vanillain is now up.
See http://www.villainrom.co.uk/viewtopic.php?f=24&t=662
I will do SlideVillain now
Anyone managed to get the OC Patch up and running on it?i know benhaam was waiting for toastcfh to pass it over?
Added SlideVillain 1.1.0 kernel to the original link (http://www.villainrom.co.uk/viewtopic.php?f=24&t=662)
can seem to get past the lock screen with the patch
The touch screen does not seem to function
Should i try a wipe
Any ideas
Demologic said:
can seem to get past the lock screen with the patch
The touch screen does not seem to function
Should i try a wipe
Any ideas
Click to expand...
Click to collapse
Sorry, which ROM are you using? Try pressing menu to unlock?
EDIT: These kernels make games playable, as behnaam has fixed the performance issue when your finger touches the screen tested on benchmark, and mike has tried some games
Ok guys this is built from source,nandroid backups cant be taken to or from TWRP. Changelog is now in post 2
*THIS HAS NOW BEEN ACCEPTED INTO THE CWM GIT FOR OFFICIAL CWM*
ALL IN ONE TOOL for windows (minimizes chances of breaking something + quicker)
if you prefer to flash it through fastboot then: you need to adb reboot bootloader then type this fastboot flash recovery recovery.img
Thanks to gannon5197, broncogr for pointing us towards the USB problem and Sandvold for making this possible and the CWM team
CDMA USERS PLEASE DO NOT USE THIS IT WILL NOT WORK
if there's anyone else i need to say thanks to please hit me
DOWNLOAD
here is a mediafire link the link above is much quicker and has no wait time or ads
http://www.mediafire.com/?7srmy72ld4ung7f
What doesnt work
WHAT WORKS
Offline charging (thanks Gannon5197)
USB Mounting
Everything
TO BE DONE
and any bugs listed above
CHANGELOG
27-6-12
usb mount now working
25-6-12
Version Update from 5.0.2.8 to 5.5.0.4
added files to recovery in preparation for possible fix
offline charging SHOULD be fixed, i need confirmation please
OP updated
thank you for this! much easier to use than the first CWM we got
USB mount doesn't work (nothing new i'm reporting here!!)
NVM
Nice
OP Updated, also can people try this new one and tell me if there's any bugs NOT LISTED please? ALL BUGS to me now please
thanks
Op updated! WORKING USB STORAGE!
Lloir said:
Op updated! WORKING USB STORAGE!
Click to expand...
Click to collapse
Nice ****... The twrp recovery just hangs sometimes and also the ui is not appealing... I'll still wait for the touch recovery
Sent from my HTC One V using XDA
before i work on touch recovery i'll be working on getting the internal drive to mount, then i'll work on touch.
Can people who have downloaded this please report back and say if usb mounting is working...i know it's working for me....but i want to be 100% certain
thanks guys
-Lloir
I confirm that USB mounting is working
hlavicka82 said:
I confirm that USB mounting is working
Click to expand...
Click to collapse
are you using a stock rom?? or the alpha cm9 rom??
I am using myONEv 2.0
hlavicka82 said:
I am using myONEv 2.0
Click to expand...
Click to collapse
Brilliant!!! so now i know it works for stock + the CM9 alpha \o/
I’m pausing this project to help Sandvold with CM9 I’m NOT giving up on this nor quitting but it's working perfectly right now.
It looks like there's no reason for me to maintain this.... Koush (maker\dev of clockwork mod and rom manager) is probably very very likely going to take it into CWM OFFICALLY! :victory:
Lloir said:
It looks like there's no reason for me to maintain this.... Koush (maker\dev of clockwork mod and rom manager) is probably very very likely going to take it into CWM OFFICALLY! :victory:
Click to expand...
Click to collapse
Nice...
Sent from my HTC One V Running SuPrimo v4.1(28/6/12)
shubhamchamaria said:
Nice...
Sent from my HTC One V Running SuPrimo v4.1(28/6/12)
Click to expand...
Click to collapse
it means i can focus on CM9 100% now.
Lloir said:
it means i can focus on CM9 100% now.
Click to expand...
Click to collapse
I think that's what everyone wants...sorry I just disconnected from irc but my internet stopped working for some time...
Sent from my HTC One V Running SuPrimo v4.1(28/6/12)
Hi guys!
CyanogenMod have released cm10.2 for several days on github.
I have tried to build cm10.2 for SU640/P930 with the help of dczz Feishui,Men and so on.
Now,Phone can get into system,but I came across a serious problem:easily hot reboot.
In the days,I don't have time to fix the problems.
so post it out now!
Anyone can change and fix this rom as long as you are interested .
I will open sourse on github.com as soon as I can.
===================================================================
Aug.28:
Today,I will post the cm10.2's sourse of LG su640.
Anyone can download and use as long as you are interested .
My github:https://github.com/joyoki
Noticefication:
1)my sourse come from Rmcc's CM10.1,so Thx again.
2)I have checked Rmcc's cm10.2 sourse of P930,he focus on kernel and display and fix many bugs and errors.
3) I'm freshman,so just can fix display and apps,kernel don't change. you can directly use cm10.1' kernel sourse to build.
4)About P93X,Rmcc have post offical cm10.2 on Aug. 27.I have check his sourse,It's better than mine,so there is no need to post P93X's version.sorry...
Hope can help you!
============================================================
Aug.26:
chalog:
Fix rebooting
Fix Sdcard (Thx for Rmcc)
bugs:
Reported by you
Rom Download:
Su640:
Release3-cm-10.2-20130826-UNOFFICIAL-su640
p93x:
Release3-cm-10.2-20130826-UNOFFICIAL-p930
Rom is Uploading...
==========================================
Aug.25:
Rebooting is Fixed,but not perfect. you should switch on "Disable HW overlays" in Settings-Develoer options.th
This is theView attachment cm10.2-8.20log.txt caught by Feishui about hot rebooting
sdcard is the problem of Fstab. It will be fixed in the later version.
Today, I provide two way to flash the rom:The Backup To Restore and The Flashable ZIP
If you are interested,you can have a try.
At last,Looking forward to Rmcc's offical CM10.2.
Rom Download:
The Backup To Restore
The Flashable ZIP
Notification:
1.The Rom is released for developers and experienced users.You may come across serviral rebooting.
2.If your phone get into system,but easily rebooting, you must go Settings-Developer options to switch on "Disable HW overlays"
3.The Backup To Restore is same with The Flashable ZIP,you don't need to download all.
4.Above all,This is a Dev ,There are many bugs,so I am not responsible for bricked devices, dead SD cards, or any other issues that may arise from flashing this ROM !
5.About P93X,LU6200 and VS920 ,it is Dev version and is easy to port based on this rom, so don't provide for the moment.
P93X port guide: you just delete "etc" and "boot" of this rom instead of P93X'CM10.1,It will work well.Good luck to you
=========================================
Aug.23:
I have find a method to Fix Rebooting.
I will test again to make sure the method is working. The Fixed Rom will be post as soon as possible.
Please Just Wait a Moment.
New ScreenShot:
http://note.youdao.com/share/?id=387922c50460a2716c8a406dc6809b95&type=note
Rom Download: Please Wait For Fix Rom...
Very cool. Thanks for sharing
Sent from my LG-P930 using Tapatalk 4
Waiting for P930. Anyway thanks for developing.
Delete post
Any responses from susers?
slg1119 said:
Thanks...
I want fix this rom
but....
I'm only have SHW-E210S
Navik, You will check this github
https://github.com/OPENSEMC
https://github.com/Team-Hydra
Click to expand...
Click to collapse
Very thanks.I have check some days ago,but not work.
Now I kil the HW,Hot Rebooting is fixed.
Anyway thx again.
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
notzippy said:
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
Click to expand...
Click to collapse
No, Data work well.you can use hiapn(an apn manage app in google play) to set apn.It's very easy.
I have built P93X's CM10.2 yesterday,but my network has some problem,uploading is very slowly.
if you cant slove ,you can try to port mine to p93x.
Good luck to you!
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
nexwave-mat said:
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
Click to expand...
Click to collapse
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
What kernel is in this rom?
ancifil said:
What kernel is in this rom?
Click to expand...
Click to collapse
Kernel is 3.0.87,wind kernel.
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
navik said:
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
Click to expand...
Click to collapse
Try this, http://pastebin.com/N0qr2nCP
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
Click to expand...
Click to collapse
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 kernels(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
ancifil said:
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 roms(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
Click to expand...
Click to collapse
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
Especially considering they released it for its virtual twin the su640.
Sent from my LG-P930 using xda app-developers app
nexwave-mat said:
Try this, http://pastebin.com/N0qr2nCP
Click to expand...
Click to collapse
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
It's not just LG's problem，It also depend on AT&T.
Sent from my LG-SU640 using xda premium
navik said:
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
Click to expand...
Click to collapse
I'm pretty sure this line is the problem. Just can find the source of the problem.
Code:
[ 27.999572] init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode
Is it just my imagination, but are the only download links for the su640?
Sent from my LG-P930 using xda app-developers app
so as title says it all for some reason i cant use touch on none of recoveries on my hox international version , dont know why i tried 3 clockworkmods and 3 twrp with touch none worked pls help and how to enable and use it , the volume rocker is almost dying on this thing..
Flash this one
http://db.tt/7Pcsg6sj
Fixed
sent from my venomized piece of technology
Mr Hofs said:
Flash this one
http://db.tt/7Pcsg6sj
Fixed
sent from my venomized piece of technology
Click to expand...
Click to collapse
woah this one is awsome also touch works thanks mate you really are something, in every case of mine you helped haha <3 <3
No problem
sent from my venomized piece of technology
link not working
can someone reupload this fix? I am having the same problem
arjaylight said:
can someone reupload this fix? I am having the same problem
Click to expand...
Click to collapse
http://techerrata.com/file/twrp2/endeavoru/openrecovery-twrp-2.4.0.0-endeavoru-JB.img
here you go
Twrp doesn't have ums and adb support.
This one has !
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
thanks
Thanks both of you!
this is awesome!
so one question? i will never be able to use twrp 2.6.3.0? because some of ROMs requires twrp, please advise!
They don't require, they are advised
Ok let me try, because im having an error flashing some of the roms. Thanks man!
Sent from my HTC One X using Tapatalk
Tell the error !
Hey...
Not sure if more people have no touch if they update to new hboot..
I had this problem...so i repacked official cwr with my kernel and my touch works again in recovery..
CHANGELOG
Code:
-changed and compiled to autobuild version 6.0.4.4
=brings some nice options to reboot to bootloader
-workaround version
=repacked with philz Zimage
=working touch
=working usb (wait around a min..or update driver)
=tried with many reboot of recovery and usb mount works..but needs time (around a min..to mount..that's why workaround...but it works..)
if anyone want..here it is
http://sourceforge.net/projects/ale...oms/Sense 5/recovery/cwr_6.0.4.4.img/download
original cwr is here
http://forum.xda-developers.com/showthread.php?t=1594819
ok..i just see no usb..will fix it..must be edit the kernel source usb files..rest work as it should..
Hi Alex,
we (users of TWRP) are waiting for a kernel developer to create custom kernel based on 3.1.10 (working touch in recovery) and usb/adb support. It will be great if you extend your kernel with usb/adb support in recovery. Could you test your development kernel with latest TWRP ramdisk?
Thanks in advance
Dark_Avenger said:
Hi Alex,
we (users of TWRP) are waiting for a kernel developer to create custom kernel based on 3.1.10 (working touch in recovery) and usb/adb support. It will be great if you extend your kernel with usb/adb support in recovery. Could you test your development kernel with latest TWRP ramdisk?
Thanks in advance
Click to expand...
Click to collapse
doesn't work too repacked with his kernel but he only needs to edit a few files
Dark_Avenger said:
Hi Alex,
we (users of TWRP) are waiting for a kernel developer to create custom kernel based on 3.1.10 (working touch in recovery) and usb/adb support. It will be great if you extend your kernel with usb/adb support in recovery. Could you test your development kernel with latest TWRP ramdisk?
Thanks in advance
Click to expand...
Click to collapse
One-X-master said:
doesn't work too repacked with his kernel but he only needs to edit a few files
Click to expand...
Click to collapse
I just build a cwr 6 using a auto builder..give some nice options back..but still no working touch or with kernel repack no usb..will try some things in the next days..if anyone know some things more let me know
Sent from my HTC One X using xda app-developers app
Alex-V said:
I just build a cwr 6 using a auto builder..give some nice options back..but still no working touch or with kernel repack no usb..will try some things in the next days..if anyone know some things more let me know
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Hi Alex,
this is the old 2.6 endeavoru kernel used by TWRP. What I know is that this is the original HTC kernel with hacked/enabled usb and adb support in recovery. This kernel is used in the official One X TWRP, but after the firmware update (tp.img) the touch is not working. Repacking the TWRP with the official HTC kernel from 4.18.402.2 recovery brings the touch back, but in a price of missing usb and adb support.
I think that this is the source of the 2.6 kernel (with hacked usb and adb in recovery) used in official TWRP. Maybe you could get some ideas from the commit history.
Hope this helps
Dark_Avenger said:
Hi Alex,
this is the old 2.6 endeavoru kernel used by TWRP. What I know is that this is the original HTC kernel with hacked/enabled usb and adb support in recovery. This kernel is used in the official One X TWRP, but after the firmware update (tp.img) the touch is not working. Repacking the TWRP with the official HTC kernel from 4.18.402.2 recovery brings the touch back, but in a price of missing usb and adb support.
Hope this help
Click to expand...
Click to collapse
much thx...this will help me a lot...will look to this tomorrow evening...(must go to bed now...work in the morning) ...try to repack twrp with philz Zimage..should give the same workaround i have...will change tommorow the usb files from my source with yours...its only a lun problem...so if i think about..it can only be 2 files...so i hope we can get this working...
Got to ask. Is it possible to add the wipe em all (except sd) option? Otherwise tnx works great on 1.72
Sent from my HTC One X using Tapatalk 4
and313 said:
Got to ask. Is it possible to add the wipe em all (except sd) option? Otherwise tnx works great on 1.72
Sent from my HTC One X using Tapatalk 4
Click to expand...
Click to collapse
i can look..but i used an autobuilder for build this version...
till now i make user wipe and direct after this a system format...thats all you need to flash a new rom...
thx for let me know that it works
Alex-V said:
i can look..but i used an autobuilder for build this version...
till now i make user wipe and direct after this a system format...thats all you need to flash a new rom...
thx for let me know that it works
Click to expand...
Click to collapse
Yes i know its not that important to add it. Usb fix and other stuff are far more important so tnx again
Sent from my HTC One X using Tapatalk 4
and313 said:
Yes i know its not that important to add it. Usb fix and other stuff are far more important so tnx again
Sent from my HTC One X using Tapatalk 4
Click to expand...
Click to collapse
yeah..but i know what you mean...
thx for using
hboot 1.73 cid_044 work thank alex
itthipon555 said:
hboot 1.73 cid_044 work thank alex
Click to expand...
Click to collapse
nice to hear
Alex-V said:
yeah..but i know what you mean...
thx for using
Click to expand...
Click to collapse
Tnx for building/developing
Sent from my HTC One X using Tapatalk 4
Had not much time to look today..but I will have a look in the next days..it's all working we know..but this wait before it mounts it's not nice..
Sent from my HTC One X using xda app-developers app
Alex-V said:
Had not much time to look today..but I will have a look in the next days..it's all working we know..but this wait before it mounts it's not nice..
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
If you have some spare time, could you build a TWRP version with usb fixed? I´ve tried to repack but no luck (not sure if I´m doing something wrong)
Hi Alex,
You are talking about fixing usb only. Does your kernel support adb in recovery mode? For me (or people which are modding existing ROM) adb in recovery is the more important feature than usb.
Juanig said:
If you have some spare time, could you build a TWRP version with usb fixed? I´ve tried to repack but no luck (not sure if I´m doing something wrong)
Click to expand...
Click to collapse
if the new kernel run, you can use it also for twrp
Dark_Avenger said:
Hi Alex,
You are talking about fixing usb only. Does your kernel support adb in recovery mode? For me (or people which are modding existing ROM) adb in recovery is the more important feature than usb.
Click to expand...
Click to collapse
can be patched
Working OK on hboot 1.72 VODAP304
Just missing Wipe Batt. Stats option.
Thank alex.
HuronTheGreat said:
Working OK on hboot 1.72 VODAP304
Just missing Wipe Batt. Stats option.
Thank alex.
Click to expand...
Click to collapse
thx...
this option never did much