Develop Bugs

[ROM][15-08-2012] ~×~ EliteMod & Kernel ICS ~×~ [sd-ext/swap/dataswap]

EliteMod ICS 120728 + EliteKernel ICS 120906
Turbo just got a new meaning.
This mod is a custom ROM based on AOKP ICS ROM and modified CM9 Kernel.
The primary aim is to dramatically increase device speed while also maximizing battery life. Secondary aim is to provide a platform with seamless app2sd integration. The bonus is getting rid of some annoying post-flash steps and settings.
To achieve this required highly experimental steps outside of the scope of Android's security system and direct intervention in userspace.
Be aware that I made this mod primarily for myself, I went to extremes to squeeze the last bit of performance out of my device. Expect no flashy stuff, just raw power and great base for your customization. I guarantee no support whatsoever and any modifications you make to your device are solely your responsibility. It's a good idea to always nandroid backup first!
Warnings - must read:
1) Do a nandroid backup, this ROM is not for everyone.
2) Full /data /cache /sd-ext wipe is mandatory before moving to EliteMod from any other ROM, even from AOKP! Not kidding!
3) This ROM relies heavily on the bundled EliteKernel. Flashing any other kernel unless I explicitly put a link in download area is probably a bad idea.
4) Flashing gApps or any performance-boosting packages is not recommended. Latest gApps are already included and tweak scripts may in some extreme cases break sd-ext support.
5) The ROM requires a manual reboot after account setup, you will see REBOOT REQUIRED on screen. Tap it and reboot the device as usual to apply additional tweaks. Any settings done before this reboot may be lost.
6) If you want to do a "Factory Reset" of this ROM, wiping /data /cache /sd-ext wipe is not enough. You must re-flash the zip to really start clean.
The usual: Do not use TitaniumBackup to restore System components unless you know what you're doing. Restoring Apex user data will forfeit fine-tuned launcher settings. Opera performance tweaks get applied after you first run it and then reboot, so it may not handle so well on first run.
Some screenshots - my customized homescreen, antutu score with this ROM and AOKP settings:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
Big thanks to all the amazing devs who made this compilation possible.
adamz667 for the base AOKP ROM
jerl92 for the base CM9 Kernel
Cyanogen and crew for their amazing ROM base
Nanling Zheng for the best gallery app
SparksCo for the original sd-ext mounting script
JaeKar99 for the boot anim
Sybregunne for his OC daemon
Andromadus team
...Awesome... for the BEATS module
And many others I'm sure I forgot to mention - thank you and keep it up.
.

Downloads:
High-speed download:
(see THIS for sd-ext and ext4 migration)
http://elite-force.eu/elitemod/EliteModICS120728.zip
Mirrors:
http://www.mediafire.com/?thaqutwrff9jzhu
Standalone ICS Kernel for AOKP-based ROMs and EliteMod (already included, unless this is newer version):
http://elite-force.eu/elitemod/MOD_EliteKernelICS_120906.zip
Standalone ICS Kernel for other ROMs like CM9:
http://elite-force.eu/elitemod/MOD_EliteKernelICS_120815-compatible.zip
(All kernels include sd-ext support! SEE THIS if you have sd-ext or swap partition on your SD card)
Old versions:
I will be triimming old versions soon, here are most mirrors http://www.mediafire.com/?613ufmrzd2ovt
Click to expand...
Click to collapse
Additional mods tested for this ROM and kernel:
DataSwap mod:
- complements sd-ext
- dramatically improves multitasking (please read this)
http://elite-force.eu/elitemod/MOD_DataSwap_64MB.zip (recommended size, flashable)
http://elite-force.eu/elitemod/MOD_DataSwap_96MB.zip (flashable)
http://elite-force.eu/elitemod/MOD_DataSwap_OFF.zip (flashable)
Google Talk:
http://elite-force.eu/elitemod/MOD_GTalkICS.zip
Google Gallery (needed for G+ picture sync):
http://elite-force.eu/elitemod/MOD_GalleryICS.zip
Click to expand...
Click to collapse
Kernel source:
https://github.com/niker/elitekernel-msm7x30
Click to expand...
Click to collapse
Frequently Answered Questions:
- if the phone is not smooth, make sure you only have ONE app that controls CPU active at a time. Daemon OR SetCPU OR System Tuner etc.
- to save even more battery, undervolt your CPU by following the guide below and my easy to use UV TOOLS package. Alternatively use this program to modify your voltages https://market.android.com/details?id=com.incredicontrol .
Click to expand...
Click to collapse
How do I use the kernel modules (USB support, FUSE, NTFS, Network drives etc.)
All available modules are in folder /system/lib/modules/*.ko
As you may have noticed only wi-fi module is enabled automatically. Because with each extra module the kernel can incur tiny performance hit, you need to chose modules you want to use and enable them automatically. To do so I recommend putting the required commands to /data/local/userinit.sh file.
Commands:
lsmod - shows the list of all active modules
insmod /system/lib/modules/xxx.ko - installs a module
Currently available modules:
cachefiles.ko - Filesystem caching on files
cifs.ko - CIFS support (advanced network filesystem)
fscache.ko - General filesystem local caching manager
fuse.ko - FUSE (Filesystem in Userspace) support
ntfs.ko - NTFS file system support (RW enabled)
usbcore.ko - Support for Host-side USB
usbhid.ko - USB Human Interface Device (full HID) support
usbkbd.ko - USB HIDBP Keyboard (simple Boot) support
usbmon.ko - USB Monitor
Click to expand...
Click to collapse
Recommended SetCPU settings (daily driver - EliteKernel only):
P6 (Temp > 46C) @ 122-768 smartassV2
P5 (Screen Off) @ 122-768 smartassV2
P4 (B < 15%) @ 122-844 smartassV2
P3 (B < 30%) @ 122-902 smartassV2
P2 (B < 50%) @ 122-940 smartassV2
P1 (B < 101%) @ 122-1228 smartassV2
Click to expand...
Click to collapse
These settings implement my own "Final Fortress"(tm) philosphy of battery management. The speed will decrease progressively with battery discharge - basically this will make your battery last longer the longer you are not charging. The goal is to save that precious last drop of power you might need in a tight situation at the end of a long day. All that without sacrificing speed when you have plenty of charge left. You should not notice significant speed decrease until you hit the reserve @ 15%.
UV hint: If you've built your own stable undervolting table, you can maximize speed with no impact on battery by aligning the max frequencies to your specific voltage peaks. (example: if there are 3 different frequencies stable on the same voltage, always use only the fastest of the group)
~CHANGELOG:
(changes with ! require full wipe)
120906 (kernel only)
- re-introduced SQLite tweaks
120815 (kernel only)
- performance improvements
- stability improvements
- included latest GPU drivers (removed in revision 2 due to HW overlay problems)
120728
- synced most changes of CM9 RC2 kernel
- minor performance improvements
- less aggressive launcher protection
- 2x faster swap transfers
- zram compiled as module (wasted 0.25% of total RAM even when inactive)
- built-in AGPS fix
- updated to AOKP milestone 6
- updated all apks
- updated su
- added smileys from HTC One X
120706
- fixed app persistence without using sd-ext
- opera tweaked again
- updated vending and gMusic to jelly bean
- update all apks
! improve new user experience (mainly default keyboard language and weather widget)
! enabled scrolling cache by default
120705 (kernel only)
- restored old resolution timer (probable cause of wakelocks and wakeup lags)
- re-added device mapper encryption support (needed for asec)
120704 (kernel only)
- reduce launcher killing without any swap (not very aggressive though, that would slow down loading of heavy apps)
- merge CM9 RC1 changes
- finally fix the ring skipping
- mild performance increase
- possibly less ANRs
- dropped support for legacy apps that control wi-fi
- enabled high-resolution system timer
- experimental audio changes may break some call recording apps (please test)
- added device mapper encryption support as module
- optimized all modules for faster loading
120627
- opera loading mobile versions fixed
- opera blocking /? pages fixed
- general audio skipping greatly reduced
120626
- better opera tweaks
- mild opera ad-blocker
- move Incredicontrol to device so that it can be easily replaced with SetCPU if desired (full ROM only)
- synced to AOKP b40 base
- kernel 120625 without changes
+ added GTalk and Gallery to mods, if you need it - flash it.
120625
- merged CM9b14 changes
- voltage minimum is capped at real hardware minimum - 750mV
- Smartass2 is more conservative to hopefully allow for a bit higher frequency/voltage ranges (expect 100-200MHz improvement tops)
- Optimize swap sweet spot to the 20-40MB range without introducing lags again
- very mild increase of in-call mic gain
120624
- improve network throughput
- 3G tweaks
- fix the random scrolling/pinching bug
- eliminate extreme lags on background app ANRs
- improve memory management when using DataSwap
- fix root always mounting as RW
- include Awesome BEATS
- update all apks
- revert default max freq to 1228800 (some CPUs are bumping to limits on 1248000)
- I/O tweaks for better multitasking, sometimes I have a feeling I'm the only one who actually RTFM
120621 (kernel only)
- more relaxed swapping
? try to reduce lags after apk installation
- faster ramping scary
120620 (kernel only)
- increased smoothness when using DataSwap mods or sd swap
- removed useless OC daemon and replaced it with simple CPU control app
(sleep profile is built into Smartass2, there is no advantage having a daemon sleep profile at all)
- increased CPU throughput slightly (more smoothness)
- fix overlapping shots on camera
120619
- elitekernel tweaks override AOKP Rom Control profiles that affect already tweaked tunables
- better memory management, reduced launcher killing
- better cache management
- custom fast module deployer in the kernel source (sh compile)
- BFS CPU scheduler revamped for better throughput and concurrency
- SIO I/O scheduler revamped for lower latencies and better performance on flash devices
- possible battery improvements
120616
! decrease default trackpad speed
- remove DSP manager until I find one that is working
- remove picoTTS engine
- include K9mail
- improve performance by re-enabling VM registry mapping (my bad)
- improve memory management a bit
- update GPS lib to .19 radio
- fix userspace undervolting
- re-add scary
- revert to slower but safer sqlite3
- improve sd card performance by writing larger blocks
120609-2
- fixed freezing/crashing due to enabled GL tiling
! fixed installation script possibly causing corruption of APKs
- greatly improved sd-ext stability
! disabled automatic creation of widgets and auto-updates without wifi for market
120609
+ first public release (AOKP build38 + CM9b10-based kernel)
Click to expand...
Click to collapse

reserved for future goodies

Waiting....
edit
Downloading...
edit
Installed.
THX

Folks just make sure you always have those backups somewhere, there are bound to be some bugs
Swap is now tested and working. Still can't recommend it though.

just installed
thanks

Superb. Could you see about getting the camera to work for yahoo video call? For me, that's the only thing missing on ICS roms.
Sent from my HTC Vision using XDA

Awesome ROM, as always!
But does anybody else's QuickPic keep crashing on startup?

Reboot might fix that or fix_permissions. The installation script can have a mind of its own Something about how AOKP handles init scripts asynchronously.
Sent from my Desire Z powered by EliteMod

Please if you have problems with some apps not working after installation, tell me if you have sd-ext partition or not, it is important for me to debug at this point.
The problem with PicFolder may be that the file is half-copied to /data and is pulled to /sd-ext by another script mid-copying, corrupting it as a result. But it's just a wild theory based on the fact that it's completely random occurence (I had this happen 1 out of 4 installations).
Scheduled changes for now is to try to time the init scripts properly and disable market auto-creating desktop widgets by default. Any other bugs I should know about?
the_gnome : The first one is that when i open the "messaging" app and click on settings the phone just freezes and i have to remove the battery and reboot. It happens on several other apps as well and the bad part is that it can't reboot, the booting animation just goes on and on, i left it for couple of hours and in the end i just reinstalled the whole rom.
Click to expand...
Click to collapse
Froze for me alright, but reboted well after battery pull. I'll see what can I do about this.
UPDATE: I nailed this down to build.prop, so hopefully it's just one line affecting all those freezes.
TEMP FIX: change"debug.enabletr=true" to false in build.prop. I call this an unforseen side-effect Apex was also returning tiling-related error logs in appdrawer.

Many freezes. For example if I open the menu of Nova Launcher or when I type something into the keyboard (e.g. in Google Play Store or Titanium Backup).
Back to your Gingerbread ROM.

I finally got the init scripts to block properly and wait for each other. Taking down both ROM and kernel for now, revised versions will come up shortly.
Code:
06-09 19:25:50.090: W/log(1321): sd-ext:mountsd: Commencing sd-ext mounting
06-09 19:25:50.110: W/log(1322): sd-ext:mountsd: ensure SD Card is present
06-09 19:25:50.371: W/log(1323): sd-ext:mountsd: Try SD...
06-09 19:25:50.391: W/log(1340): sd-ext:mountsd: SD not present, waiting 1s
06-09 19:25:51.382: W/log(1411): userinit: Start userinit handling
06-09 19:25:51.412: W/log(1416): userinit: SD-ext still running, postponing
06-09 19:25:51.802: W/log(1420): sd-ext:mountsd: SD found
06-09 19:25:51.852: W/log(1421): sd-ext:mountsd: find SD Card now or never
06-09 19:25:51.862: W/log(1423): sd-ext:mountsd: wait for the device to settle
06-09 19:25:51.872: W/log(1424): sd-ext:mountsd: SD card should be settled if present
06-09 19:25:51.882: W/log(1426): sd-ext:mountsd: Check skipped
06-09 19:25:51.892: W/log(1428): sd-ext:mountsd: transfer apks to sd-ext
06-09 19:25:52.373: W/log(1437): sd-ext:mountsd: /sd-ext first created
06-09 19:25:52.373: W/log(1438): sd-ext:mountsd: mount and set perms
06-09 19:25:52.633: W/log(1444): userinit: SD-ext still running, postponing
06-09 19:25:52.863: W/log(1452): sd-ext:mountsd: Mounted, migrating apks
06-09 19:25:53.213: W/log(1465): sd-ext:apps2sd: Commencing sd-ext integration
06-09 19:25:53.213: W/log(1467): sd-ext:apps2sd: create directories if necessary.
06-09 19:25:53.333: W/log(1468): sd-ext:apps2sd: Mounting into system
06-09 19:25:53.333: W/log(1470): sd-ext:apps2sd: /data/app bound!
06-09 19:25:53.414: W/log(1472): sd-ext:apps2sd: /data/app-private bound!
06-09 19:25:53.424: W/log(1474): sd-ext:apps2sd: Apps2SD successfully activated
06-09 19:25:53.884: W/log(1513): userinit: Userinit active!
06-09 19:25:54.034: W/log(1531): complete: Start init completion script
06-09 19:25:54.064: W/log(1533): complete: userinit still running, postponing
06-09 19:25:55.075: W/log(1560): complete: Complete init active!
Can't believe that took me a week to figure out

New version
New version is now released
* Stability improved tenfold
* installation is now safe
* you may experience lags after final boot, this is normal, there is fix_permissions running on background, just let it settle for 2 minutes If you reboot during the fixing, it will start up on every boot until it completes.
Please full-wipe coming from first version, some parts of your ROM might have been corrupted during installation and just updating would not fix all issues.
120609-2
- fixed freezing/crashing due to enabled GL tiling
- fixed installation script possibly causing corruption of APKs
- greatly improved sd-ext stability
- disabled automatic creation of widgets and auto-updates without wifi for market

Is there something that doesn't work? What about camera and camcorder, for example?

Well there's no working FM Tuner for ICS I know of. Camera and camcorder work although only 480p video. Other than that I don't really miss anything

nik3r said:
Well there's no working FM Tuner for ICS I know of. Camera and camcorder work although only 480p video. Other than that I don't really miss anything
Click to expand...
Click to collapse
spirit fm free may25 works in andro/cm9/aokp normally and in yours (already dl your rom i not have time will test in next 2 hours)
1843mhz and 1900mhz makes my phone rebooting and freezing all time. are these speeds experimental?

Anything above 1248MHz should be used with performance governor only (maybe conservative/scary might handle it).
The other governors are too aggressive and you would need to raise the minimum frequency to stabilize them. This is a hardware limitation of voltage switching on our CPU. The cost we have to pay if we want awesome battery life
BTW: is it just me or DSP equalizer has no effect whatsoever? I am certain it was fine few builds ago though

Did a full wipe of all partitions and sd card.. wow this rom is FAST. But unfortunately camera app crashes when I try to record video. Tried fix permissions. Still nothing. I don't see where to change the resolution of the camera? Is it set to 480 by default or do I need to change it
Never mind.. I had external sd turned on in it.. turned that off and it works like a charm.. if I can keep up this level of speed on this rom after a few days I'll be very happy!
Sent from my HTC Vision using xda premium

I loaded my 250+ apps on it, running LWP and it didn't break a sweat
Sent from my Desire Z powered by EliteMod

nik3r said:
Anything above 1248MHz should be used with performance governor only (maybe conservative/scary might handle it).
The other governors are too aggressive and you would need to raise the minimum frequency to stabilize them. This is a hardware limitation of voltage switching on our CPU. The cost we have to pay if we want awesome battery life
BTW: is it just me or DSP equalizer has no effect whatsoever? I am certain it was fine few builds ago though
Click to expand...
Click to collapse
you are wright for the both. only one personal request if you can . crt on

[Updated][Aroma] Scripts and Tweaks: All in One [04/07/13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
Ive make this "Aroma installer" for the ease of installing different scripts and tweaks with just simple click of a button.
Now, you can install multiple scripts and Save the trouble of installing one script at a time(like before).
With aroma installer all your scripts are stored at one package ; its well organise and also makes your phone clean
Disclaimer:-
I hold no responsibility of use, misuse, no use, unuse of this Installer. I held no responsible of whatever that happens OR DO NOT happens with your phone.
However, constructive criticism is always welcome, appreciated and needed.
Click to expand...
Click to collapse
Note: Root Access is Required and Init.d Folder Support
Screenshots:
Features:
1. Andrenaline Engine
2. Geeky Engine
3. Supremacy Script
4. Velocity Tweaks
5. Blaidy Scripts
6. Loopy Smoothness
7. Net- Fork
8. Cronmod Scripts
a. Cronmod Unofficial
b. Cronmod data2sd-fixed
c. Cronmod data2ext
9. Beats Audio
Note: Make sure you know the scripts/tweaks and then Install. Cause it might "Brick" your Device. Also the scripts/tweaks might not be supported by all devices. If you know what you are doing, go ahead .
Installation Instructions:
1. Place AllinOne.zip in sdcard
2. Goto Recovery
3. Install AllinOne.zip
4. Follow the Instructions in the wizard.
5. Install selected scripts and tweaks.
6. Reboot
7. Done. Enjoy
Download:
Download AllinOne v1.0.zip
Download AllinOne v2.0.zp
Credits:
1. Amarullz for Great AROMA Insatller
2. Iamareebjamal for helping me.
3. Slayer321(me) for making.
Special Thanks goes to Scripts’ and Tweaks’ Maker
1. forever king
2. ImbaWinde
3. Emwno
4. Ne.Xt
5. Eoghan2t7
6. DroidFolks
7. Slaid480
8. Styrke
9. RockoDev
10. iamareebjamal
11. ANDY
Incase, if i miss out anyone. Im sorry for that (Do PM Me).

Changelog v1.0
Added:
1. Andrenaline Engine v4.4
2. Geeky Engine
3. Supremacy Script v3
4. Velocity Tweaks v2.1.1
5. Slaidy Boost v2.3
6. Loopy Smoothness
7. Net- Fork v3.0
8. Beats Audio v6.27
9. CronMod Script
Click to expand...
Click to collapse
Changelog v2.0
1. Cosmis Tweak LightSpeed
2. Bravia Engine
3. New Wizard UI
4. Uninstall Option Added
5. Scripts/Tweaks Info Added
6. More tweaks and scripts will be added soon.
Click to expand...
Click to collapse
Scripts and Tweaks Info
REQUIRED: Init.d folder Support and Root Access.
NOTE: The following Scripts and Tweaks have not been tested on every devices. It might not be supported.
CAUTION: They may "Brick" Your device!!
Note: Make a NANDroid Backup before Proceeding(Installing).
Conflict OR No-Conflict?:
(My view)Performance based, Internet speed and Touch Impre=ovement scripts/tweaks has no conflict with each other. Except for more Power Drainage.
Cronmod Script: Should be aproach with caution. Get more info about it first.
Entertainment Scripts can be install with any other script. As you wish.
Andrenaline Engine
Thread Link:
Properties: Increase Phone Performance
Features
? Increase touchscreen sensitivity
? Less RAM usage through zipalign. | World first smart zipaligning
? Reduced /dbdata, /data, /sdcard usage of *.db files and faster database access. | World first smart sqlite optimizing
? Faster disk access through remount script (noatime, disabled barrier etc) | World first smart remounting
? Better network throughput from TCP tweaks and 3G tweaks
? Tons of prop tweaks
? Overall Better Performance and Battery Life
? Less lags through LMK Tweak and Various VM Tweaks
? Faster SDCARD Read/Write Speed
? Bypass website like thepiratebay.se | Thanks !
? CWM Flashable
? Transform your phone to Lamborghini. (joke , lol)
Geeky Engine
Thread Link
Properties: Increase Phone Performance.
Features:-
Some xbin tweaks
Many init.d tweaks
Many ddefault.prop tweaks
VM Tweaks
SD card tweak
Better Battery Life through Battery Tweaks
Reduced /dbdata, /data, /sdcard usage of *.db files and faster database access. | World first smart sqlite optimizing
Increase touchscreen sensitivity
much of prop tweaks
CWM Flashable
Less lags through LMK Tweak and Various VM Tweaks
Loopy Smoothness
Thread Link
Properties: Feel the Smooth in Touch.
Features:
- Entering your PIN with minimal/no delay/lag
- Minimising delay with lock screen pattern/unlock (not the time it takes to wakeup, but the touchscreen response lag)
- Having smoother notifications on the status bar, and smoother pulldown menu response
- Minimising Launcher lag while Media Scanner is running (can scroll through screens without heavy pauses)
- Minimising lag when scrolling through the market while icons are still loading
- Installing/Uninstalling apps while continuing other tasks
- Minimising/eliminating intermittent lag spikes in gaming
- No delay in being able to answer phone calls
Supremacy Script
Thread Link
Properties: Better Performance || More Speed || Much Less Lag
Trilogy Features:
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
Net Fork
Thread Link
Properties: Increase Internet Speed.
Features:
(Faster internet from that of previous Netforks tweaks): Increase internet speed (EDGE, 3G, WLAN, VPN). Works with all browsers including Opera with all APNs.
- Compressing pages and then decompressing for less data usage & smooth browsing.
- Bypass slow downloads and let you full speed downloads from some file sharing site which requires premium account for fast downloads. Like depositfiles etc.
- Boosting network signal strength so to have no call drops.
- Faster downloads from Android Market / Google Play (all versions).
- No sudden disconnection of internet when you are using internet.
Cronmod Script
Thread Link
What it does :
It moves data/app data/local and data/dalvik-cache to sd-ext.
Data/data is moved in Data2ext version.Other files are still in internal memory.
It binds data to /internal so you can acces to app, dalvik-cache, local and data/data which are in internal memory.
Attention: It does not move the whole data to sd-ext because gps won't work.
In settings you'll see your internal memory instead of sd-ext memory.
Note: This script may brick your device. So proceed with caution; get more info first.(visit xda)
Beats Audio
Thread Link
Properties: Enhanced Speaker, Quality of sound etc.
Features:
*Beats Libs
*Beats Bins
*ETC Files
*SRS
*somewhat of a .jar file
*New HW files(Could affect boot for some phones)
Slaidy Boost
Thread Link
Properties: Increase Performance.
Features:
-RAM Manager,Less Lags,better Multitasking(LMK and MinFree Completly adapted For SGM)
-Automatic Zipalign(Zipalign xbin is included)
-TCP and 3G Tweaks For Better Network
-SD Card Read Speed ahead Set to 3072kb(4096 is Very agressive)
-Better Battery Life through Battery Tweaks and Linux Battery Tweaks too
-VM Tweaks
-Mutch More Smoother Phone!!
-A Lot More!!!
Velocity Tweaks
Thread Link
Properties: Increase Performance.
Features:
-Browse your file system faster
-Enjoy more free RAM! Play All You Want!
-Multitask with no lags!
-Surf the internet with no limits!
-More Battery life!
-More,More, Features you will love!
Cosmis Tweak Light Speed
Thread Link
Properties: Increase Performance.
I don't know why but when I installed Simplicity, RAM consumption was very high even after opening 2 apps. (More than 200)
So, I included loopy smoothness, adrenaline script and simplicity is simply like a RED BULL
So, what does the mod do?
It gives your mobile wings
Smoothness by loopy smoothness
Better RAM consumption by adrenaline tweak
And prerajulisation and farhanitration by kuro Tweaks and other Tweaks
RAM consumption is great and also device is very snappy
Features:
ZRam Tweak
Adrenaline Tweak
Loopy Smoothness Tweak
Kuro Tweak 1
Kuro Tweak 2
Sysctl Tweak
Droidwall Modules
Bravia Engine
Thread Link
Properties: Enhance Graphic Proccessing and Output. Hence Better graphics.
While the latest BRAVIA ENGINE builds on tried and tested BRAVIA ENGINE technology, it does so with the advantage of a new chipset and picture processing software.
This new technology has allowed BRAVIA ENGINE to improve - even in respect to its own dazzling performance:
Contrast. Increased depth and clarity, as well as new light control technology to control peak brightness levels, means stunning images even on the brightest of scenes.
Colours. New colour histogram technology detects and optimises overall colour distribution of each frame. This technology delivers breathtaking colour by making millions of improvements to each frame before you even see it.
Detail. Advanced Noise Reduction lies behind BRAVIA’s ability to show you every blade of grass on a football pitch and really put you at the heart of the action.
ERROR??
1. Report the error your facing.
2. Save the Logs after installation
3. Attach log file here.
Click to expand...
Click to collapse
Thanks,

Screenshots Added!! I hope you like it. Its just a small contribution from my side.

awesome!!!

Can provide more information?

Madalinsuny said:
Can provide more information?
Click to expand...
Click to collapse
Will do that in my next update as soon as im free. I will add more too...there's a lot to do...so be patience, im doing my best.
Send from Batman's Bat- Phone

Thread Updated!!!
Download Link? Uploading ASAP.
Edit: Download Link Added.

Gonna try this soon
Sent from my GT-I8190 using Tapatalk 2

[Q] noob
what happen if i install all of this on my gt s-5830i.. v.2.0
Slayer321 said:
Introduction:
Ive make this "Aroma installer" for the ease of installing different scripts and tweaks with just simple click of a button.
Now, you can install multiple scripts and Save the trouble of installing one script at a time(like before).
With aroma installer all your scripts are stored at one package ; its well organise and also makes your phone clean
Note: Root Access is Required and Init.d Folder Support
Screenshots:
Features:
1. Andrenaline Engine
2. Geeky Engine
3. Supremacy Script
4. Velocity Tweaks
5. Blaidy Scripts
6. Loopy Smoothness
7. Net- Fork
8. Cronmod Scripts
a. Cronmod Unofficial
b. Cronmod data2sd-fixed
c. Cronmod data2ext
9. Beats Audio
Note: Make sure you know the scripts/tweaks and then Install. Cause it might "Brick" your Device. Also the scripts/tweaks might not be supported by all devices. If you know what you are doing, go ahead .
Installation Instructions:
1. Place AllinOne.zip in sdcard
2. Goto Recovery
3. Install AllinOne.zip
4. Follow the Instructions in the wizard.
5. Install selected scripts and tweaks.
6. Reboot
7. Done. Enjoy
Download:
Download AllinOne v1.0.zip
Download AllinOne v2.0.zp
Credits:
1. Amarullz for Great AROMA Insatller
2. Iamareebjamal for helping me.
3. Slayer321(me) for making.
Special Thanks goes to Scripts’ and Tweaks’ Maker
1. forever king
2. ImbaWinde
3. Emwno
4. Ne.Xt
5. Eoghan2t7
6. DroidFolks
7. Slaid480
8. Styrke
9. RockoDev
10. iamareebjamal
11. ANDY
Incase, if i miss out anyone. Im sorry for that (Do PM Me).
Click to expand...
Click to collapse

dj88 said:
what happen if i install all of this on my gt s-5830i.. v.2.0
Click to expand...
Click to collapse
First if all, Dont qoute the whole OP post.
If you install all, you will face battery drainage(ALot).
And some of the script are very dangerous. they might brick you phone (like cromod sript). So proceed with caution.
Get to know the script first and then install them. Some of them are almost the same. Like scripts on performance based. So its your choice. A little experimentation with them will let you know; which one is better.

Thnx sir
N sry m noob
Sent from my GT-S5830i using xda app-developers app

Slayer321 said:
Screenshots Added!! I hope you like it. Its just a small contribution from my side.
Click to expand...
Click to collapse
How you took screenshots of Aroma installer?

bsuhas said:
How you took screenshots of Aroma installer?
Click to expand...
Click to collapse
You nedd Android SDK, and you cantake the SS from DBMS.bat or monitor.bat

Can iinstall it on TWRP?? Love this AIO tweak

[Aroma]Tweaks and Scripts: All in One [25/07/13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
Ive make this "Aroma installer" for the ease of installing different scripts and tweaks with just simple click of a button.
Now, you can install multiple scripts and Save the trouble of installing one script at a time(like before).
With aroma installer all your scripts are stored at one package ; its well organise and also makes your phone clean
Disclaimer:-
I hold no responsibility of use, misuse, no use, unuse of this Installer. I held no responsible of whatever that happens OR DO NOT happens with your phone.
However, constructive criticism is always welcome, appreciated and needed.
Click to expand...
Click to collapse
Note: Root Access is Required and Init.d Folder Support
Screenshots:
Features:
1. Andrenaline Engine
2. Geeky Engine
3. Supremacy Script
4. Velocity Tweaks
5. Blaidy Scripts
6. Loopy Smoothness
7. Net- Fork
8. Cronmod Scripts
a. Cronmod Unofficial
b. Cronmod data2sd-fixed
c. Cronmod data2ext
9. Beats Audio
Note: Make sure you know the scripts/tweaks and then Install. Cause it might "Brick" your Device. Also the scripts/tweaks might not be supported by all devices. If you know what you are doing, go ahead .
Installation Instructions:
1. Place AllinOne.zip in sdcard
2. Goto Recovery
3. Install AllinOne.zip
4. Follow the Instructions in the wizard.
5. Install selected scripts and tweaks.
6. Reboot
7. Done. Enjoy
Download:
Download AllinOne v1.0.zip
Download AllinOne v2.0.zp
Credits:
1. Amarullz for Great AROMA Insatller
2. Iamareebjamal for helping me.
3. Slayer321(me) for making.
Special Thanks goes to Scripts’ and Tweaks’ Maker
1. forever king
2. ImbaWinde
3. Emwno
4. Ne.Xt
5. Eoghan2t7
6. DroidFolks
7. Slaid480
8. Styrke
9. RockoDev
10. iamareebjamal
11. ANDY
Incase, if i miss out anyone. Im sorry for that (Do PM Me).

Changelog v1.0
Added:
1. Andrenaline Engine v4.4
2. Geeky Engine
3. Supremacy Script v3
4. Velocity Tweaks v2.1.1
5. Slaidy Boost v2.3
6. Loopy Smoothness
7. Net- Fork v3.0
8. Beats Audio v6.27
9. CronMod Script
Click to expand...
Click to collapse
Changelog v2.0
1. Cosmis Tweak LightSpeed
2. Bravia Engine
3. New Wizard UI
4. Uninstall Option Added
5. Scripts/Tweaks Info Added
6. More tweaks and scripts will be added soon.
Click to expand...
Click to collapse
Scripts and Tweaks Info
REQUIRED: Init.d folder Support and Root Access.
NOTE: The following Scripts and Tweaks have not been tested on every devices. It might not be supported.
CAUTION: They may "Brick" Your device!!
Note: Make a NANDroid Backup before Proceeding(Installing).
Conflict OR No-Conflict?:
(My view)Performance based, Internet speed and Touch Impre=ovement scripts/tweaks has no conflict with each other. Except for more Power Drainage.
Cronmod Script: Should be aproach with caution. Get more info about it first.
Entertainment Scripts can be install with any other script. As you wish.
Andrenaline Engine
Thread Link:
Properties: Increase Phone Performance
Features
? Increase touchscreen sensitivity
? Less RAM usage through zipalign. | World first smart zipaligning
? Reduced /dbdata, /data, /sdcard usage of *.db files and faster database access. | World first smart sqlite optimizing
? Faster disk access through remount script (noatime, disabled barrier etc) | World first smart remounting
? Better network throughput from TCP tweaks and 3G tweaks
? Tons of prop tweaks
? Overall Better Performance and Battery Life
? Less lags through LMK Tweak and Various VM Tweaks
? Faster SDCARD Read/Write Speed
? Bypass website like thepiratebay.se | Thanks !
? CWM Flashable
? Transform your phone to Lamborghini. (joke , lol)
Geeky Engine
Thread Link
Properties: Increase Phone Performance.
Features:-
Some xbin tweaks
Many init.d tweaks
Many ddefault.prop tweaks
VM Tweaks
SD card tweak
Better Battery Life through Battery Tweaks
Reduced /dbdata, /data, /sdcard usage of *.db files and faster database access. | World first smart sqlite optimizing
Increase touchscreen sensitivity
much of prop tweaks
CWM Flashable
Less lags through LMK Tweak and Various VM Tweaks
Loopy Smoothness
Thread Link
Properties: Feel the Smooth in Touch.
Features:
- Entering your PIN with minimal/no delay/lag
- Minimising delay with lock screen pattern/unlock (not the time it takes to wakeup, but the touchscreen response lag)
- Having smoother notifications on the status bar, and smoother pulldown menu response
- Minimising Launcher lag while Media Scanner is running (can scroll through screens without heavy pauses)
- Minimising lag when scrolling through the market while icons are still loading
- Installing/Uninstalling apps while continuing other tasks
- Minimising/eliminating intermittent lag spikes in gaming
- No delay in being able to answer phone calls
Supremacy Script
Thread Link
Properties: Better Performance || More Speed || Much Less Lag
Trilogy Features:
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
Net Fork
Thread Link
Properties: Increase Internet Speed.
Features:
(Faster internet from that of previous Netforks tweaks): Increase internet speed (EDGE, 3G, WLAN, VPN). Works with all browsers including Opera with all APNs.
- Compressing pages and then decompressing for less data usage & smooth browsing.
- Bypass slow downloads and let you full speed downloads from some file sharing site which requires premium account for fast downloads. Like depositfiles etc.
- Boosting network signal strength so to have no call drops.
- Faster downloads from Android Market / Google Play (all versions).
- No sudden disconnection of internet when you are using internet.
Cronmod Script
Thread Link
What it does :
It moves data/app data/local and data/dalvik-cache to sd-ext.
Data/data is moved in Data2ext version.Other files are still in internal memory.
It binds data to /internal so you can acces to app, dalvik-cache, local and data/data which are in internal memory.
Attention: It does not move the whole data to sd-ext because gps won't work.
In settings you'll see your internal memory instead of sd-ext memory.
Note: This script may brick your device. So proceed with caution; get more info first.(visit xda)
Beats Audio
Thread Link
Properties: Enhanced Speaker, Quality of sound etc.
Features:
*Beats Libs
*Beats Bins
*ETC Files
*SRS
*somewhat of a .jar file
*New HW files(Could affect boot for some phones)
Slaidy Boost
Thread Link
Properties: Increase Performance.
Features:
-RAM Manager,Less Lags,better Multitasking(LMK and MinFree Completly adapted For SGM)
-Automatic Zipalign(Zipalign xbin is included)
-TCP and 3G Tweaks For Better Network
-SD Card Read Speed ahead Set to 3072kb(4096 is Very agressive)
-Better Battery Life through Battery Tweaks and Linux Battery Tweaks too
-VM Tweaks
-Mutch More Smoother Phone!!
-A Lot More!!!
Velocity Tweaks
Thread Link
Properties: Increase Performance.
Features:
-Browse your file system faster
-Enjoy more free RAM! Play All You Want!
-Multitask with no lags!
-Surf the internet with no limits!
-More Battery life!
-More,More, Features you will love!
Cosmis Tweak Light Speed
Thread Link
Properties: Increase Performance.
I don't know why but when I installed Simplicity, RAM consumption was very high even after opening 2 apps. (More than 200)
So, I included loopy smoothness, adrenaline script and simplicity is simply like a RED BULL
So, what does the mod do?
It gives your mobile wings
Smoothness by loopy smoothness
Better RAM consumption by adrenaline tweak
And prerajulisation and farhanitration by kuro Tweaks and other Tweaks
RAM consumption is great and also device is very snappy
Features:
ZRam Tweak
Adrenaline Tweak
Loopy Smoothness Tweak
Kuro Tweak 1
Kuro Tweak 2
Sysctl Tweak
Droidwall Modules
Bravia Engine
Thread Link
Properties: Enhance Graphic Proccessing and Output. Hence Better graphics.
While the latest BRAVIA ENGINE builds on tried and tested BRAVIA ENGINE technology, it does so with the advantage of a new chipset and picture processing software.
This new technology has allowed BRAVIA ENGINE to improve - even in respect to its own dazzling performance:
Contrast. Increased depth and clarity, as well as new light control technology to control peak brightness levels, means stunning images even on the brightest of scenes.
Colours. New colour histogram technology detects and optimises overall colour distribution of each frame. This technology delivers breathtaking colour by making millions of improvements to each frame before you even see it.
Detail. Advanced Noise Reduction lies behind BRAVIA’s ability to show you every blade of grass on a football pitch and really put you at the heart of the action.
ERROR??
1. Report the error your facing.
2. Save the Logs after installation
3. Attach log file here.
Click to expand...
Click to collapse
Thanks,

Slayer321 said:
Introduction:
Ive make this "Aroma installer" for the ease of installing different scripts and tweaks with just simple click of a button.
Now, you can install multiple scripts and Save the trouble of installing one script at a time(like before).
With aroma installer all your scripts are stored at one package ; its well organise and also makes your phone clean
Click to expand...
Click to collapse
Netforks Tweaks is fake.
zeppelinrox said:
For the ****z n giggles I ran it...
Code:
[email protected]:/data # /data/netforks_tweak
[email protected]:/data #
oh no error?
So I turn on debugging...
Code:
[email protected]:/data # sh -x /data/netforks_tweak
+ su
[email protected]:/data #
No error because all it does is run "su"
Everything else after that isnt even seen... so no errors show up.
Kinda like how you can't see what don't exist lol
Click to expand...
Click to collapse

I've installes some of these acripts and tweaks including Beats Audio. But my question is how to to modify Beats Audio's settings?

Anyone?

Thanks !
Thanks A Lot !!

Thanks!

Wow! Very good tweaks! Thanks man

Anyone tested on JellyBread 5.1 ?
Sent from my GT-S5660 using Tapatalk 2

Gyovany96 said:
Anyone tested on JellyBread 5.1 ?
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I've installed adrenaline engine and loopy smoothness

[ROM][5.1.1][i9000] A-5.1.1 rom - 7.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​ROM​
A-5.1.1 ROM​Information and thanks:
A-ROM: v7.0
Last Update: 29.01.2016
Anroid: 5.1.1
Bulid: Omni rom/CodeROM
Kernel with bigmem: Omni kernel edit by Coldwindofnowhere
CHANGE-LOG 7.0-STABLE:
- fix usb connect
- Optimaliz dithering,fast dormancy
- Change Heapsize for APP-48mb for 512mb ram
- Cache size set 0
- Off google location and google network location
- set hidden apps limit 14
- set max strarting apps 6
- fstrim script
- cpu tuner
- Update bussybox
- Fix crash (?)
Change-log old version:
- Add better ram manager
- Slimmed 149 mb
- New Better look and Slimmer Apk Music
- Trebuchet Launcher (smoother)
- Fix "In setting and language option when you exit from it you have error with closing this option"
- less font file (its better for system)
- Add tweaks for battery life and performance
- Smooth keboard
- Super Smooth SystemUI
- Add Script "Seeder"
- Fixed dalvik
- Disable autologin Browser
- Optimalize bulid.prop
- Tined color Browser
- new better stock clock
- delete apps
- Change DPI (210)
- Gallery material light
- remove auto update omni
- Dialer fix delay
- Less RAM usage
- Disable logcat
- 16bit transp.
- Disable Logers
- Enabled purgeable
- Download Manager Fix
- Optimization start system
- Disable JIT
- Fix move to sd card
- improved stability
- Add kill media server
- Disable Android Device Check In.
- Disable Extended JNI Checks
- Optimization ART (faster application loading)
- New Material Calendar
- System Apps Optimizing (such as: Calculator, Phone, SystemUI, Mms etc.)
- Add Webview optimalization
- Patch Bigmem, now You can watch Youtube with MAX RAM (426mb)
- fix lags, when watch video (e.g youtube)
- Balanced video quality
- improved speed ext4 (file System)
- improved sqlite
- improved OOM_ADJ Settings
- improved net buffer
- Smooth FOREGROUND apps
- Disable debugging notify icon on statusbar (Offloads CPU)
- Performance boost in deodexed (Stop verify bytecode in system & data apps)
- Scroll (should will better)
- Watch Video should will better (Add bulid.prop code video.accelerate.hw=1)
- Change Logo
- Add more song notify etc.
- Change ICON
- Change Default wallpaper
- Launcher from 6.0 AOSP (smoother)
- Delete permissions
- VM optimization
- More dalvik improved (run data only in dexopt)
- Optimaliz dithering,fast dormancy
- Change Heapsize for APP-48mb for 512mb ram
- Cache size set 0
- Off google location and google network location
- set hidden apps limit 14
- set max strarting apps 6
- fstrim script
- cpu tuner
- Update bussybox
And more...
DOWNLOAD
ROM 7.0:
A-7.0 5.1.1
GAPPS:
OPEN GAPPS
VIDEO v2.9.0
https://www.youtube.com/watch?v=5Cccn9zZz4o
​
________________________________________________________________________________
Questions / Help
You install rom and have a very many "Google Services has been stopped"?
Off Phone>GO to recovery>(without wipe)Install rom>reboot to recovery>Install gaps>reboot to system
YOU CAN'T DOWNLOAD APK?
GO SETTINGS> Apps>ALL>Download Manager>CLEAR DATA
If WiFi stucks on "WiFi is starting..." message then:
- Unmount and remove SD card
- Reboot
- Turn WiFi on, connect to network
- insert SD card back (by alex_rex)
How to faster:
More ram:
GO SETTINGS>Advanced>Bigmem>Change to Bigmem/Max Ram
Background process limit:
-About phone, and 10 click in "Bulid number"
-Now go to settings>Developer options
- Background process limit
- Change "At most, 3 processes"
Browser faster:
Go to Browser>Settings>Advanced (here disable JavaScript)
Turn OFF Autoupdate APPS:
Go to Google Play>Settgings
Overclock:
Go to Settings>Performance>Change for 1400
THANKS FOR USE ! A-TEAM​

there was a time when none was ready to build a lollipop build... now we have so many builds we get confused which 1 should we try

I'm waiting the 2.7.0 release...

Great bro

this rom is really good so far would like to see 2.7 or even what 2.8 would bring.
i have install this on a friends i9000 works good ,BUT this device stalls for no good reason (stayes in sleep or just hangs randomly) fixed this issue with raising base clock to 200 mhz (i suspect that its device related this one is quite battle scared - let the clash of clan continue)
great work keep the A+'s coming

I'll try asap bro
Many thanks

Flashed the 2.7.0 and it is really smooth and fast, and there are also some build prop mods added to increase performance which is really great. I even underclocked/undervolted to about 1000 and it freaking fast. The only thing i miss about omni is the custom header which make it really beautiful. Haven't actually checked the battery life but overall a really great ROM to flash. I dont actually know how effective build prop is but it would be nice to have some battery or performance enhancing build prop tweaks
Keep up the great work

Those who have installed this ROM, Is Dialer delay realy fixed ?

fathi48 said:
Those who have installed this ROM, Is Dialer delay realy fixed ?
Click to expand...
Click to collapse
Wait marshmallow delay in callui is totally fixed

Hey dracov76. Yesterday I installed your ROM in 2.6.1 version and it works smoothly, but there is warm phone syndrome on 1.4GHz (what's not the case in Omni from pure source - UC to 1.2 cooled it down). Anyways, now I'm going to install 2.7.0 (almost finished config on 2.6.1 and I see 2.7.0 ).
I've some concerns about 2.7.0's Messenger app:
- Did you name this app Mms in 'priv-app' folder? It can cause conflicts for people packing Messenger in GApps package.
[If app is to stay, please change it's name from Mms to Messaging in 2.8.0].
- Also, it's archaic version 1.0.131 for X02 variant (no libs and for 160DPI I think), while out there is 1.6.043 variant X34 (libs for ARMv7 and 240DPI [ours]).
[There is newer version [take -34.phone]: http://gappsandroid.blogspot.com/2015/11/messenger-apk-download.html].
Ouch, and about our navigation bar (that one at bottom of the screen):
- We have hardware control, so we can disable it.
- If we want it, then we also want to disable hardware navigation bar.
It's 'hw vs sw' nav war
Until 2.8!

Hey, messenger application with my gapps works very well, because optimized for our phone, thank you for helping me.

Hi dracov76,
I cannot move apps to SD :crying:

Hi, I know
One user wrote to me on this subject, and he gave me a solution (I think): D
I try fix this

Ram for this rom ?

yah7733 said:
Ram for this rom ?
Click to expand...
Click to collapse
GO SETTINGS>Advanced>Bigmem>Change to Bigmem/Max Ram
Normal - 383mb
MAX - 427mb

dracov76 said:
GO SETTINGS>Advanced>Bigmem>Change to Bigmem/Max Ram
Normal - 383mb
MAX - 427mb
Click to expand...
Click to collapse
need Wipe with fs2f ?
1 . Normal
2. bigmem camera and video work ? ?
3 . Max sure camera not work .
thank you very much your reply .

yah7733 said:
need Wipe with fs2f ?
1 . Normal
2. bigmem camera and video work ? ?
3 . Max sure camera not work .
thank you very much your reply .
Click to expand...
Click to collapse
You don't need it.
XLMem-All work
Bigmem - without 720P
Max Ram (breaks camera)

dracov76 said:
You don't need it.
XLMem-All work
Bigmem - without 720P
Max Ram (breaks camera)
Click to expand...
Click to collapse
:good::good: thanks you

Hey, man... This ROM is so awesome, fast as hell, and sick how you manage to slim it to this small size xD the only detail is that doesn't have DSP Manager :c anyone knows where to find a flashable zip of DSP? Or at least the apk?

iagm12 said:
Hey, man... This ROM is so awesome, fast as hell, and sick how you manage to slim it to this small size xD the only detail is that doesn't have DSP Manager :c anyone knows where to find a flashable zip of DSP? Or at least the apk?
Click to expand...
Click to collapse
Thanks for your opinion.
No problem, There you go DSPManager

[ROM][4.4.2][i9000] A-4.4.2 rom

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM​
Information and thanks:
A-4.4.2 ROM
A-ROM: 1.2
Last Update: 16.02.2016
Anroid: 4.4.2
Bulid: OmniROM/Mackay
This rom is very smooth, and looks great.
I know that few people are will benefit because they prefer to 6.0.1
Changelog 2.0:
-Fix Crash Store
-Fix Back key problem
-Fix All problem with keyboard
-Correct A-ROM logo
More less problem.
Normal 4.4.2 vs this:
A-ROM CHANGELOG:
- Remove any unnecessary permissions
- VM optimization
- Slimmed 135 mb
- Disable Security
- New Better look and Slimmer Apk Music
- less font file (its better for system)
- Add tweaks for battery life and performance
- Add Script "Seeder"
- Optimalize bulid.prop
- new better stock clock
- delete apps
- Change DPI (210)
- remove auto update omni
- Less RAM usage
- Disable logcat
- 16bit transp.
- Disable Logers
- Enabled purgeable
- Disable JIT
-Optimization system/bin
-Disable Android Device Check In.
-Disable Extended JNI Checks
- Optimization ART (faster application loading)
- Corrected Dalvik
- Fix lags, when watch video
- Change video quality
- improved sqlite
- improved OOM_ADJ Settings
- improved net buffer
- Smooth FOREGROUND apps
- Disable debugging notify icon on statusbar (Offloads CPU)
- Performance boost in deodexed (Stop verify bytecode in system & data apps)
- Watch Video should will better too (Add bulid.prop code video.accelerate.hw=1)
- Fast reboot
- 390mb ram
- Chenge ICON
- Change Keyboard
- Launcher like MM
And more..
Mackay Changelog:
-Mackay kernel
-Christopher86's cortex-A8 optimized Linaro toolchain (January version)
-O3 optimization
-updated to linux kernel version 3.0.101
-SLQB memory allocator (default, should be slightly faster)
-XZ compression of kernel & initramfs
-396MB RAM
-SIOplus scheduler
-Added Lagfree governor
-ROW scheduler (tweaked, default scheduler)
-FIOPS scheduler (tweaked)
-XZ compression of kernel & initramfs
-many improvements to IO schedulers in general
-Deadline tuning (thanks to DerTeufel)
-Ondemand tuned (updated based on code of stratosk)
-SmartassV2 governor
-OndemandX governor
-Interactive governor (updated to android 3.4 code + fixes)
-Wheatley & Lulzactive governors
-Conservative tuned
-Call volume hack (use “Settings>Mackay Settings”* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using “Settings>Mackay Settings”*)
-Battery life extender (set through “Settings>Mackay Settings”*)
-CustomVoltage (set using NSTools)
-USB OTG support (needs external power supply)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks: http://lwn.net/Articles/489734/
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
-Unaligned CPU access
-Improvements to RWSEM code
-Improvements to binder code
-Improvements to tmpfs
-Added frandom (much faster random number generator)
-Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
-Many parts of the code build as module to reduce effective kernel size
-Updated wifi driver to 5.90.195.114
-Updated GPU driver to DDK [email protected]
-Proportional Rate Reduction for TCP
-Introduce timer slack controller
-Zram patched
-Low RAM switch option (default off)
DOWNLOAD
A-ROM 2.0
A-4.4.2-2.0
GAPPS:
A-GAPPS 4.2.2
​________________________________________________________________________________
________________________________________________________________________________
Questions / Help
How to faster:
Clean:
Once every 2 days Clean Cache (Settings>Storage & USB)
Background process limit:
-About phone, and 7 click on "Bulid number"
-Now go to settings>Developer options
- Background process limit
- Change "At most, 3 processes"
Browser faster:
Go to Browser>Settings>Advanced (here disable JavaScript)
Turn OFF Autoupdate APPS:
Go to Google Play>Settgings
Overclock:
Go to Settings>Performance>Change for 1400
KSM ENABLE:
-About phone, and 7 click on "Bulid number"
-Now go to settings>Performance>Memory>Enable KSM
THANKS FOR USE ! A-TEAM​

☺?nice work bro

Force closes on playstore,keyboard on boot.Back button and menu button don't work.It looks promising if you fix this problems.:good:
ps:A ROM logo on boot is half cutted.

Hello,
Thank you for you great work. All A-ROM that I have tested are amazing
My Galaxy S has never been as many times formatted :silly:
I installed A-4.4.2 ROM coming from A-5.1.1 ROM. I performed a full wipe (Date, System, Cache, Dalvik Cache).
I installed only the ROM and reboot the phone. At this point, all functionality are OK and phone is responding very well.
Then reboot to recovery to install last OPEN-GAPPS (open_gapps-arm-4.4-pico-20160217).
After successful install and Reboot, problems start and the ROM is become unstable.
The error "Unfortunately, Android Keyboard (AOSP) has stopped" is occurred all the time. Keyboarding is impossible.
Also "Back Key" is not working in any application or menu. There is no way to go back.
Hope that you will find a solution. Meanwhile I go back to A-5.1.1 ROM :good:
PS: the boot logo is corrupted.

HamZeus said:
Hello,
Thank you for you great work. All A-ROM that I have tested are amazing
My Galaxy S has never been as many times formatted :silly:
I installed A-4.4.2 ROM coming from A-5.1.1 ROM. I performed a full wipe (Date, System, Cache, Dalvik Cache).
I installed only the ROM and reboot the phone. At this point, all functionality are OK and phone is responding very well.
Then reboot to recovery to install last OPEN-GAPPS (open_gapps-arm-4.4-pico-20160217).
After successful install and Reboot, problems start and the ROM is become unstable.
The error "Unfortunately, Android Keyboard (AOSP) has stopped" is occurred all the time. Keyboarding is impossible.
Also "Back Key" is not working in any application or menu. There is no way to go back.
Hope that you will find a solution. Meanwhile I go back to A-5.1.1 ROM :good:
PS: the boot logo is corrupted.
Click to expand...
Click to collapse
Flash gapps without keyboard libs

I Fix:
-Crash Store
-Back key problem
-All problem with keyboard
-A-ROM logo
More less problem.
Link tomorrow.

dracov76 said:
I Fix:
-Crash Store
-Back key problem
-All problem with keyboard
-A-ROM logo
More less problem.
Link tomorrow.
Click to expand...
Click to collapse
Hello,
I installed the new A-ROM version with the GAPPS package and now it's OK:
- No Keyboard crash.
- No Store crash.
- Back Key working.
- Boot logo OK.
The only problem I found til now is with cLock app : weather is not displayed (No data all the time).
I used the phone with 1GHz CPU and KMS activated.
With Antutu BenchMark v5.2 I got max 5939.
PS : For 1.2GHz CPU, the phone is not very stable. Random reboots are observed.

i don't like GAPPS, and yeah, it's a very good rom, but i have an interesting problem: my keyboard crashing sometime. Special: When I make a vertical position to horizontal. And boom, crash time.
How can i fix? Because i use another Android Keyboard app, and this is a goooooood rom, better than 6.0 roms now.

AndroidJohny said:
i don't like GAPPS, and yeah, it's a very good rom, but i have an interesting problem: my keyboard crashing sometime. Special: When I make a vertical position to horizontal. And boom, crash time.
How can i fix? Because i use another Android Keyboard app, and this is a goooooood rom, better than 6.0 roms now.
Click to expand...
Click to collapse
try google keyboard from playstore thats the only soution

play the new Arom video streams? Zatto/Clipfish??? All other Arom Version play nothing.

same here - horizontal keyboard crash crash crash
i'm on 4.4.2 on an LG g2 mini. yes, stock 4.4.2 is better than CM12.1 that i was on before.
yes, i think your ROM has the same keyboard as i had found somewhere and like.
Android_Keyboard_(AOSP).APK. i think it's one for ICS. "Unfortunately, Android keyboard (AOSP) has stopped"
so yes, i'll love if you can fix your ROM's keyb-issue - and tell me how to extract the keyboard as an APK so that i can give it a go.
the google keyboard from the play store doesn't crash, but it misses the long-press characters (and i don't remember if swiping works on it).

cant find any custom recovery to install this rom :/ any help

side said:
cant find any custom recovery to install this rom :/ any help
Click to expand...
Click to collapse
This is simple :
1. YOU NEED TO HAVE THE ORIGINAL 3 FILE JVU (STOCK!) 2.3.6 ROM
2. After that: CWM recorvery for the 3 file JVU 2.3.6 rom
3. Find the right Semaphore kernel, and do it
4. AND NOW INSTALL THIS ROM!

AndroidJohny said:
This is simple :
1. YOU NEED TO HAVE THE ORIGINAL 3 FILE JVU (STOCK!) 2.3.6 ROM
2. After that: CWM recorvery for the 3 file JVU 2.3.6 rom
3. Find the right Semaphore kernel, and do it
4. AND NOW INSTALL THIS ROM!
Click to expand...
Click to collapse
cant find the semaphore kernel

side said:
cant find the semaphore kernel
Click to expand...
Click to collapse
DOWNLOAD LINK FOR THE SEMAPHORE 2.3.0 KERNEL

Can you tell me how to add persian language? thanks for this Rom.

Can anyone tell me how to add arabic/persian language to this rom or even if its possible? Thanks
Sent from my SM-N9005 using XDA Premium 4 mobile app

Anyone?
Sent from my SM-N9005 using XDA Premium 4 mobile app

amin12345 said:
Can anyone tell me how to add arabic/persian language to this rom or even if its possible? Thanks
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ya there is an one way just copy fonts from other rom and place in this rom and flash it. (Go to system> copy Fonts folder and place in this rom)

Hi there,
Rom is really good. There is a problem with my phone. I can use some of the sdcard1 sdcard0 but I can not see my computer. Sdcard1 part does not appear in the pictures in the gallery.
I do computer connection via TWRP I see sdcard0 and sdcard1. Sdcard intact. Also Settings \ Storage seems to sdcard size.
What do I need to use some Sdcard1.