Hi guys,
I have recently added support for the Galaxy S3 for my Android ROM kitchen, and have confirmed that ROMs can successfully be built and flashed for the GS3 variants for AT&T, T-Mobile and International.
Since I don't have the Sprint device, I was wondering if some of you can confirm it works for the SPH-L710 (and also the C Spire SCH-L710).
Please follow the instructions below to use the kitchen for your GS3. These are T-Mobile instructions but should also work for the Sprint model:
http://forum.xda-developers.com/showthread.php?t=1939420
Would be greatly appreciated!
No one wants to give this a shot? It should definitely work, since the file format of the Sprint S3 custom ROMs are similar to that of the other S3 variants.
dsixda said:
No one wants to give this a shot? It should definitely work, since the file format of the Sprint S3 custom ROMs are similar to that of the other S3 variants.
Click to expand...
Click to collapse
I will give it a try this weekend. Sorry I can't do any sooner than that. I figured people would be all over this. Thanks for everything that you do.
What experience level is required to effectively use this?
Samsung Galaxy S3
OdexedBlue ROM
LI3 Stock Kernel
LIF Baseband
XDA Premium - Support our developers, modders, & themers!
DrgnRebrn said:
What experience level is required to effectively use this?
Samsung Galaxy S3
OdexedBlue ROM
LI3 Stock Kernel
LIF Baseband
XDA Premium - Support our developers, modders, & themers!
Click to expand...
Click to collapse
No ROM customizing experience required, maybe some basic Linux/UNIX command knowledge... but the FAQ should help you out.
Excellent! I've been studying up on Android development. I can't wait to get familiar with this! Thank you for this opportunity!
Samsung Galaxy S3
OdexedBlue ROM
LI3 Stock Kernel
LIF Baseband
XDA Premium - Support our developers, modders, & themers!
Running this right now on a Linux box(Mint 13 Cin.). Will report back. Attempting to do the latest jelly bean leak.
How'd it go? Make sure you have latest version of kitchen.
Ran it and it wouldn't flash on my phone. Attempting to use my windows box just to see if it wasn't something that I did that made it not work.
Same thing happened on my other box. Keeps failing when it says updating cache. Says it expects an arguement of four but is only getting three.
lostcausenjtown said:
Ran it and it wouldn't flash on my phone. Attempting to use my windows box just to see if it wasn't something that I did that made it not work.
Same thing happened on my other box. Keeps failing when it says updating cache. Says it expects an arguement of four but is only getting three.
Click to expand...
Click to collapse
Updating cache? What did you try to do to your rom? Did you start with a stock, unmodified rom? The error about the arguments has to do with the update-binary, but first I need to know what you are doing. Simplest thing to do is to just root it and then flash that.
I am definitely interested in this. I'll try to get it prepped if the gf relinquishes my pc to me =(. Wb dsixda. Saw your kitchen was on hiatus before. Now to cook up some custom roms for myself and friends.
Sent from my SPH-L710 using Tapatalk 2
dsixda said:
Updating cache? What did you try to do to your rom? Did you start with a stock, unmodified rom? The error about the arguments has to do with the update-binary, but first I need to know what you are doing. Simplest thing to do is to just root it and then flash that.
Click to expand...
Click to collapse
I had the stock deodexed LIH update. It was in zip format. All I did was run it through the kitchen. (Make a working folder and the option 99 to build from working folder). I made no edits whatsoever. I used the interactive mode to build the rom. Both times, it failed on me with the same code. I can upload the update-binary from the one I built if that will help.
lostcausenjtown said:
It was in zip format. All I did was run it through the kitchen.
.
Click to expand...
Click to collapse
No no... that's not the way I intended it. I linked a guide on the first post, please do not ignore the instructions. The kitchen will not work with someone else's zipped ROM - everyone uses their own methods. Start with an untouched stock ROM image and root it, then flash it.
dsixda said:
No no... that's not the way I intended it. I linked a guide on the first post, please do not ignore the instructions. The kitchen will not work with someone else's zipped ROM - everyone uses their own methods. Start with an untouched stock ROM image and root it, then flash it.
Click to expand...
Click to collapse
Ok got it. Read the instructions wrong. Only have the LG8 in tar format that I will try. I flash this via odin when I have problems. Will report back.
Ran the odin files through the kitchen and the rom booted up just fine.
lostcausenjtown said:
Ran the odin files through the kitchen and the rom booted up just fine.
Click to expand...
Click to collapse
Awesome, you made the flashable zip? Root working?
If he doesnt confirm back with you, i'll take a shot at it... i'm really familiar with the kitchen because of my old evo view rom
Sent from my SPH-L710 using Tapatalk 2
contradude said:
If he doesnt confirm back with you, i'll take a shot at it... i'm really familiar with the kitchen because of my old evo view rom
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
That would be great..
dsixda said:
Awesome, you made the flashable zip? Root working?
Click to expand...
Click to collapse
Yes the zip did flash and root is working. I even deodexed now and it works as well(not that I expected anything different). Thank you for your awesome work.
lostcausenjtown said:
Yes the zip did flash and root is working. I even deodexed now and it works as well(not that I expected anything different). Thank you for your awesome work.
Click to expand...
Click to collapse
Thank you for your awesome work as well!
Related
Hi All,
I have a Rogers I747 system Dump uploaded to my drop Box.
https://www.dropbox.com/sh/5zbwf3fjpimethj/BfgAAhppni
Enjoy!
Awesome, thanks! I've been looking to go back to my Rogers stock (on dietics now), but couldn't find out how. Can I just flash this or does something need to be done to it first?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Nelsocracy said:
Awesome, thanks! I've been looking to go back to my Rogers stock (on slimics now), but couldn't find out how. Can I just flash this or does something need to be done to it first?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I am sort of new to this too... I was told by the good people at xda to provide a dump for system... i am sure someone can compile it or something to make it workable.... if anythign is required on my part i will gladly help
Thanks a lot I can'T wait for roms and kernels for my device!
I'd love to flash back to stock rogers as well. Anyone able to make it a flashable .zip?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Yeah this is just what i needed before i start flashing like crazy !
Slim ics for real ...loved it on my infuse
Sent from my SGH-I747M using Tapatalk 2
Would this help with Root and not updating the counter?
Do not flash system dump
Hello, everyone.
DO NOT flash the Rogers System Dump, or any system dump for that matter.
It's simply a set of system files from a Rogers unit, which will help developers design a ROM around a Rogers base.
I sent my Rogers system dump to a few developers for this purpose. Hopefully, over the next few days, we'll have a new ROM with all the features of the Rogers ROM, and without the AT&T influence (they have a habit of ruining good features).
If you're looking for a stock Rogers ROM, you'll have to wait.
Peter
PeterHTC said:
Hello, everyone.
DO NOT flash the Rogers System Dump, or any system dump for that matter.
It's simply a set of system files from a Rogers unit, which will help developers design a ROM around a Rogers base.
I sent my Rogers system dump to a few developers for this purpose. Hopefully, over the next few days, we'll have a new ROM with all the features of the Rogers ROM, and without the AT&T influence (they have a habit of ruining good features).
If you're looking for a stock Rogers ROM, you'll have to wait.
Peter
Click to expand...
Click to collapse
Do you, or anyone, know if there is a stock.tar rogers firmware floating around? Would be great to provide to the devs here http://forum.xda-developers.com/showthread.php?t=1739426 so that we can have a root only solution for Rogers.
I wish I knew ...
David Dee said:
Do you, or anyone, know if there is a stock.tar rogers firmware floating around? Would be great to provide to the devs here http://forum.xda-developers.com/showthread.php?t=1739426 so that we can have a root only solution for Rogers.
Click to expand...
Click to collapse
I'm also looking for such a file. I'd like to have it, just in case.
Peter
P.S. To anyone who knows the answer, what happens if I take an existing custom ROM, for example, the DIET ICS ROM, and overwrite the system files with my Rogers system dump, repack the ZIP file and then flash? Would this work? Would this then become a flashable stock Rogers ROM?
Although I'm quite experienced and familiar with rooting, flashing, etc., this is getting a bit beyond me.
can you post just the modem.. so we can try flashing to at&t and see if we can get the ability to choose 3g/4g /networks thanks.
PeterHTC said:
I'm also looking for such a file. I'd like to have it, just in case.
Peter
P.S. To anyone who knows the answer, what happens if I take an existing custom ROM, for example, the DIET ICS ROM, and overwrite the system files with my Rogers system dump, repack the ZIP file and then flash? Would this work? Would this then become a flashable stock Rogers ROM?
Although I'm quite experienced and familiar with rooting, flashing, etc., this is getting a bit beyond me.
Click to expand...
Click to collapse
Lol, sometimes these things are best left to the devs, trust me.
You're right ...
David Dee said:
Lol, sometimes these things are best left to the devs, trust me.
Click to expand...
Click to collapse
LOL
You're right. I played around with a custom ROM, tried a few tests, and none worked. Fortunately, I did a Nandroid immediately beforehand, so all is well.
I'll wait for a real developer to make a proper ROM.
Peter
---------- Post added at 01:21 PM ---------- Previous post was at 01:20 PM ----------
lgkahn said:
can you post just the modem.. so we can try flashing to at&t and see if we can get the ability to choose 3g/4g /networks thanks.
Click to expand...
Click to collapse
I wish I could, but I have no idea how to extract the modem.
Peter
Anyone want to post steps to do a dump? I've got a Telus model here that's just aching to be helpful to the cause. Although I have already rooted/installed CWM....
I could always just go borrow someone else's for 20 minutes and dump to my SD card though.
dstruct2k said:
Anyone want to post steps to do a dump? I've got a Telus model here that's just aching to be helpful to the cause. Although I have already rooted/installed CWM....
I could always just go borrow someone else's for 20 minutes and dump to my SD card though.
Click to expand...
Click to collapse
I'd also like the steps too plz, thx. Can dump my bell model.
Uss_Defiant said:
I'd also like the steps too plz, thx. Can dump my bell model.
Click to expand...
Click to collapse
To Dump...
go to your command prompt and type
"adb pull /system C:/sgs3/system.img"
C: is your C drive and sgs3 is a folder which you would have to create.
Takes about 15 - 20 minutes and i believe this is a system dump....
I am not sure how to do a modem dump... i guess it would be a folder in there which needs to be pulled.
Rogers Modem
Hello guys,
I followed this guide here: http://forum.xda-developers.com/showthread.php?t=1705650 (credits to: UpInTheAir)
And I extracted my Rogers modem!
Here it is! Rogers SGH-i747M Modem DUMP (I747MVLLE8) :good:
Flashable version! modem_CWM_Rogers_i747M.zip
Is it the modem or the ROM that allows LTE toggle on our Canadian I747M (compared to our AT&T neighbors) ? Based on my experience with modem flashing from Nexus S and i9100M, my download and upload speeds, and latency and overall connection stability were affected.
If this modem is flashable, I want to try using AT&T modem to see if I get better connection stability.
Sent from my SGH-I747M using Tapatalk 2
lgkahn said:
can you post just the modem.. so we can try flashing to at&t and see if we can get the ability to choose 3g/4g /networks thanks.
Click to expand...
Click to collapse
I cannot believe AT&T doesn't offer the option to disable LTE. I guess they are after increased data consumption, but at the expense of customer dissatisfaction due to worse battery life...come on! I guess we really don't have it as bad as we think with Rogers.
nk_blu said:
Is it the modem or the ROM that allows LTE toggle on our Canadian I747M (compared to our AT&T neighbors) ? Based on my experience with modem flashing from Nexus S and i9100M, my download and upload speeds, and latency and overall connection stability were affected.
If this modem is flashable, I want to try using AT&T modem to see if I get better connection stability.
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
It's the rom that supports the lte toggle, not the modem.
Sent from my SGH-I747M using Tapatalk 2
Considering the similarities between the domestic variants of the Note 2 and their international counterparts, would anyone be willing to test some of the success that the folks over in the AT&T forum have had with porting the international N7100/N7105 firmware/ROM's over to the T-Mobile Note 2
Check out these two threads over in the AT&T forum and see what you all think:
http://forum.xda-developers.com/showthread.php?t=2016575
http://forum.xda-developers.com/showthread.php?t=2018411
The basic gist of the procedure is to use a custom recovery like CWM or TWRP to flash a stock N7100/N7105 firmware, and then flash your carrier specific modem/kernel.
Why would anyone want to do this? Well, for starters, you would benefit from built-in stock-supported tethering, and a few other features that carriers disable (YMMV). But mainly this means that the domestic versions of the Note 2 can benefit from the development of the international versions! So, when the latest version of Android comes out for the rest of the world, we aren't stuck here waiting for our carrier to catch up to everyone else...
So what do you all think? Anyone willing to try?
I have see this post on att
Sent from my SGH-T889 using xda premium
Jade Eyed Wolf said:
So what do you all think? Anyone willing to try?
Click to expand...
Click to collapse
Well, why don't you try and tell us if it works...
distortedloop said:
Well, why don't you try and tell us if it works...
Click to expand...
Click to collapse
It works I flashed the rom tmo modem and kernel
Sent from my SGH-T889 using xda premium
It works guys, been using omega since yesterday
Sent from my JellyBean Galaxys3
any instructions / links to get omega on the tmobile note 2
haldi15 said:
any instructions / links to get omega on the tmobile note 2
Click to expand...
Click to collapse
Second that
Sent from my SGH-T889 using xda premium
haldi15 said:
any instructions / links to get omega on the tmobile note 2
Click to expand...
Click to collapse
+1
noted for future reference on my Note 2
So can we flash aosp roms too?
fix-this! said:
So can we flash aosp roms too?
Click to expand...
Click to collapse
If we have CM10 / AOSP kennel then yes we can .
simplelife said:
If we have CM10 / AOSP kennel then yes we can .
Click to expand...
Click to collapse
Actually, there is a port of cm10 for the ATT Note 2 device, it was ported from the official cm10 for the N7100 device by madmack. I'm running it on the T-Mobile Note 2 and to tell you the truth, it is very stable so far even if it's coming from a nightly build. Check out this link http://forum.xda-developers.com/showthread.php?t=2024495.
Once you go to that link, go to page 24 or 25 because you need to download 3 zip files in order for the rom to function correctly, also make sure to download the modem or radio because you need to flash that as well. Before you flash anything make sure to go to the OP for that rom and follow instructions thoroughly. If you're concerned for the S Pen functionality, don't worry, it works, I just had to download an app from the play store called Memo (which doest the same stuff as S Note.
Well if you wanna try, I don't have the time but .....
Here is some stuff to help you..
Do a Nandroid backup. or Titanium backup.
Do a full wipe,
Flash the rom you want, if given the option don't flash the modem
then flash Jedi-X Kitchen http://forum.xda-developers.com/showthread.php?t=2106549
Then if you had to flash another Modem for that Rom then flash http://downloadandroidrom.com/file/GalaxyNote2/tmoroms/JediX/T889V_Modem.zip if that fist your PHONE (tmO)
I may do a video on it in Youtube if i get time but the omega rom was just taking too long to download so i am not trying it tonight.
I am going to flash Jedi X
Nite...
See you on yTube. http://bit.ly/YT-DL-SG
It didn't work
DeLaguna said:
Here is some stuff to help you..
Do a Nandroid backup. or Titanium backup.
Do a full wipe,
Flash the rom you want, if given the option don't flash the modem
then flash Jedi-X Kitchen http://forum.xda-developers.com/showthread.php?t=2106549
Then if you had to flash another Modem for that Rom then flash http://downloadandroidrom.com/file/GalaxyNote2/tmoroms/JediX/T889V_Modem.zip if that fist your PHONE (tmO)
Click to expand...
Click to collapse
I just tried this, and while the Omega ROM flashed just fine, I had no radio signal, no data, no calls, and the phone would not recognize my SIM Card. That is after flashing the Jedi Kitchen and the radio provided in the link.
The Omega ROM looks pretty awesome, it would be nice to have it working on TMO Note II's.
Disclaimer:
I have to admit, I've flashed 4 different ROM's so far, and only two of them have completed the install. The rest have failed during the update, or caused a boot cycle. This includes the Jedi Master ROM. So it's entirely possible I'm doing something wrong.
fix-this! said:
So can we flash aosp roms too?
Click to expand...
Click to collapse
ROOT BOX is an ATT ROM that works well
CARBON NIGHTLY | KROZ HUE THEME | CRACK FLASHER
It is actually posted in the n7100 that all roms need to be ported to us carriers and gives procedures on how to do so
Not saying the guys in the posts before mine are wrong but need to be careful when flashing n7100 roms without porting them the proper way
Sent from my SGH-T889 using xda premium
Did You?
fuzzymusket said:
I just tried this, and while the Omega ROM flashed just fine, I had no radio signal, no data, no calls, and the phone would not recognize my SIM Card. That is after flashing the Jedi Kitchen and the radio provided in the link.
The Omega ROM looks pretty awesome, it would be nice to have it working on TMO Note II's.
Disclaimer:
I have to admit, I've flashed 4 different ROM's so far, and only two of them have completed the install. The rest have failed during the update, or caused a boot cycle. This includes the Jedi Master ROM. So it's entirely possible I'm doing something wrong.
Click to expand...
Click to collapse
Hey did you ever try a complete wipe using TWRP as your recovery factory wiping then system wiping as well, I Also found depending on your SD card if you can back up your Sd cards Sometimes it is helpful to start with just the files you need to flash on the sd. Make sure that you only flash the correct radio. For me that was the latest radio I think its the second down in the list for the jedi kitchen part.
Feel free to contact me but I am very busy so I apologize ahead of time for being slow.
Can anyone answer if 4G and LTE is still working or is it 3G only? Are you able to still roam the same?
Can anyone tell me how to create a flashable ROM from the MVLDMF1 firmware released for Odin in the link below?
I am unable to download it because I am not a "Premium Member", I'd really like to use this as my ROM's base, if anyone can help or throw me a suggestion, I'd be very grateful!!!
http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=0
Sorry, I don't know, but dang.... it;s FINALLY released!
Am looking forward to what you can do with it @Adizzzle!
saj222 said:
Sorry, I don't know, but dang.... it;s FINALLY released!
Am looking forward to what you can do with it @Adizzzle!
Click to expand...
Click to collapse
Thanks man, I've already got some stuff lined up to make building the Rom a much quicker process, just gotta get my hands on the actual Rom now!
Adizzzle said:
Thanks man, I've already got some stuff lined up to make building the Rom a much quicker process, just gotta get my hands on the actual Rom now!
Click to expand...
Click to collapse
You only need to sign up to download links, no need to pay or anything.
Anyway, here is the link provided :
https://hotfile.com/dl/230576652/80088bb/I747MVLDMF1_I747MOYBDMF1_TLS.zip.html
BTW, do you know how to apply this update if I'm rooted and don't want to loose it? I'd also love not to reinstall everything, is it possible?
Does thia work for AT&T S3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
loginatnine said:
You only need to sign up to download links, no need to pay or anything.
Anyway, here is the link provided :
https://hotfile.com/dl/230576652/80088bb/I747MVLDMF1_I747MOYBDMF1_TLS.zip.html
BTW, do you know how to apply this update if I'm rooted and don't want to loose it? I'd also love not to reinstall everything, is it possible?
Click to expand...
Click to collapse
I figured that out just a few minutes ago, and am currently downloading!
Now I just gotta figure out how to make a flashable .zip from an Odin firmware... :silly:
Ljdd said:
Does thia work for AT&T S3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yes it should my good sir.
Adizzzle said:
I figured that out just a few minutes ago, and am currently downloading!
Now I just gotta figure out how to make a flashable .zip from an Odin firmware... :silly:
Yes it should my good sir.
Click to expand...
Click to collapse
Going to give it a try, can you give me instructions or point me to the instructions?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Ljdd said:
Going to give it a try, can you give me instructions or point me to the instructions?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Download the appropriate Odin firmware from the link in the first post. (you gotta have a SamMobile account)
Flash using Odin, like you did to originally root your S3. (Assuming that was your root method)
Though i'm almost certain your root privileges will be gone.
OR
Wait until someone creates a flashable .zip, and then flash in Recovery.
:highfive:
Don't you need a new modem for att
Sent from my SAMSUNG-SGH-I337 using xda premium
erstad said:
Don't you need a new modem for att
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I have no idea how this works, but correct me if I'm wrong. I'm rooted with a custom recovery. Can In download this and flash it through Odin? Will it work even though i'd lose the custom recovery and root?
No, the ROM version and the modem version don't have to be the same or in sync. But don't cross flash modem firmware, i.e. flash i747M to i747 or vice versa, you can brick your phone.
erstad said:
Don't you need a new modem for att
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I'm building the I747MVLDMF1 rom right now.
Will upload for other Devs to use after it's tested,
so far so good in the good ol' kitchen! :victory:
Adizzzle said:
I'm building the I747MVLDMF1 rom right now.
Will upload for other Devs to use after it's tested,
so far so good in the good ol' kitchen! :victory:
Click to expand...
Click to collapse
Can anyone extract the latest Paper Artist.apk from this update (should be in system apps) to put on my S4? I gave away my S3 to my cousin..
Xdenwarrior said:
Can anyone extract the latest Paper Artist.apk from this update (should be in system apps) to put on my S4? I gave away my S3 to my cousin..
Click to expand...
Click to collapse
Here ya go: https://docs.google.com/file/d/0B7PBbhHg95GkVHh4MkhVenR5WTg/edit?usp=sharing
I ripped it out of deTmobilized 1.3 (6-18-13) (UVDMD5 4.1.2 Premium Suite) AT&T Port (http://forum.xda-developers.com/showthread.php?t=2317259)
They SHOULD be the same.
Xdenwarrior said:
Can anyone extract the latest Paper Artist.apk from this update (should be in system apps) to put on my S4? I gave away my S3 to my cousin..
Click to expand...
Click to collapse
I sure can, Sadly though the build isn't working correctly as I wasn't able to extract the META-INF folder
properly, and I was a [email protected] and used the META-INF from the MVLDLK4 build.
Will this work on AT&T
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Ljdd said:
Will this work on AT&T
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Eventually
Installed 4.1.2 (stock) sd card not recognized (fixed)
So I tired OTA, well that didn't work, server probably busy so I went and fired up Kies and got the update that way.... while I was looking for what changed I noticed the SD card wasn't mounted... nor would it mount. So I popped it into the computer, sure enough everything was still there.. back to s3... nothing.... back to the computer again... check the format.. yep fat32.... back to s3 nothing....popped an old card in and it recognized it.... take that one out, put in the one it couldn't read before... and there it is.... weird right? Now it works fine...
Ljdd said:
Will this work on AT&T
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
In stock form, yes and no. The Rom would probably run, but the Canadian modem will most likely destroy your imei.
I got it running good aside from not having the correct basband and no data.. hope someone can suggest something so I can get this amazing rom running properly.
This is a Stock Root Flashable Version Of the newest JellyBean 4.3 N900VVRUBMJE
Requirements: This Build is Compatible with both the Developer Edition and Retail Verizon Note 3
We Got an OTA Yay!!!
Features:
Rooted
insecure boot.img(for DevEditions)
BusyBox
Zipaligned
Deodexed/Odex
Init.d support
Bash
Sqlite3
Nano
adb as root(for DevEditions)
Removed Knox Apks
SysRW/SysRO
DeOdex Download: http://www.androidfilehost.com/?fid=23269279319198553
md5: e23eb50cf24d16c5acf228ea91ade0c8
Disclaimer: no apks have been edited this is a full stock rom that you would expect to get from verizon minus the knox crap i removed, If You use this as a Base For your rom please give credit where it is due, other than that feel free to use this as u see fit. thanks guys
Thanks to:
Hashcode- for Safestrap For Retail Note 3's
Scrosler - for being himself lol
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
KingoApp- for the MJE root method
Retail: if you are on a retail note3 it is highly recomended to flash the MJE tar then root/install safestrap then install this (that way u have the most current firmware as the kernel and modem changed alot)
Dev Editions: i will have a flashable firmware package up soon
Reserved Just incase
Enjoy Guys!!!!
Awesome job!
Congrats on new release!
That was quick ! Thank you Beans
Sent from my SM-N900V using Tapatalk
beanstown106 said:
Retail: if you are on a retail note3 it is highly recomended to flash the mj7 tar then take the ota and root/install safestrap then install this (that way u have the most current firmware as the kernel and modem changed alot)
Click to expand...
Click to collapse
I don't have phone service and I don't get over-the-air updates so I'm still on MI9 de la Vega. Can I use B4.3?
Frank
SGH-I717(AoCP6.4)/SM-N900V(MI9-dlV)/XDA Premium
beanstown106 said:
Retail: if you are on a retail note3 it is highly recomended to flash the mj7 tar then take the ota and root/install safestrap then install this (that way u have the most current firmware as the kernel and modem changed alot)
Dev Editions: i will have a flashable firmware package when we can pull the MJE tar from kies/update assistant on a retail. however this works fine with our current modems because we can update kernels retails cannot unless they take ota
Click to expand...
Click to collapse
If we already on MJ7, just take update and re-root, install safestrap.. then we can flash this if need be?
Gunthermic said:
If we already on MJ7, just take update and re-root, install safestrap.. then we can flash this if need be?
Click to expand...
Click to collapse
ya basically well i would do this for all mje based roms, obviously once u do it once you dont need todo it again
beanstown106 said:
ya basically well i would do this for all mje based roms, obviously once u do it once you dont need todo it again
Click to expand...
Click to collapse
Thnx for reply.
I will be using this as my Base for DarkHorse Revolution ROM...
Gunthermic said:
Thnx for reply.
I will be using this as my Base for DarkHorse Revolution ROM...
Click to expand...
Click to collapse
anytime
Ps- Deodex is now live. time to get some zzzZZZzzz's LOL
Gunthermic said:
Thnx for reply.
I will be using this as my Base for DarkHorse Revolution ROM...
Click to expand...
Click to collapse
Hmmmmm ?
Sent from my SM-N900V using Tapatalk
So I can flash thks in one slot...then reboot in other slot and keep the new modem??
suzook said:
So I can flash thks in one slot...then reboot in other slot and keep the new modem??
Click to expand...
Click to collapse
Correct, modems are in place for all partitions so updating it will apply to all slots
Is the only way to update the kernal on the retail edition to take the OTA?
Hit thanks if I helped you out.
Sent from my Galaxy Note 3 running Jelly Beans
Previous Devices: S4, Note 2, Droid Charge, Fascinate
Posted by a Indirect Verizon Rep that actually knows what your talking about.
Is it possible to post a flashabpe zip of the new modem?
ButterBoost Rom Developer
Just asking is this the new ota update we are talking about and if so since im rooted with mj7 safestraped should i unistall safestrap an take the update?
DutchDogg54 said:
Correct, modems are in place for all partitions so updating it will apply to all slots
Click to expand...
Click to collapse
Hey Dutch,
So just to make sure that I understand this response correctly, if I back up my current stock slot [Running B4 in Stock slot], flash this ROM over it, then restore the backup I just made, would I pretty much be all set with the JE update?
Thanks!
hctimin said:
Hey Dutch,
So just to make sure that I understand this response correctly, if I back up my current stock slot [Running B4 in Stock slot], flash this ROM over it, then restore the backup I just made, would I pretty much be all set with the JE update?
Thanks!
Click to expand...
Click to collapse
Flashing via safestrap only updates the framework to the latest build so I believe you'd still have the old kernel and modem. As far as I know, (correct me if I'm wrong @beanstown106), since our bootloader is locked we have to use Odin to flash modems & kernels.
DutchDogg54 said:
Flashing via safestrap only updates the framework to the latest build so I believe you'd still have the old kernel and modem. As far as I know, (correct me if I'm wrong @beanstown106), since our bootloader is locked we have to use Odin to flash modems & kernels.
Click to expand...
Click to collapse
Gah,...that's a bummer.
I'm looking at how to unroot and was worried I'd softbrick the phone or something if I flashed an older/incompatible firmware
I made a backup of my original stock TW installation, but when I hit the Update button in About Phone, my Settings app just force closes and stops responding.
This kernel has moved to http://forum.xda-developers.com/note-4/unified-development
Support and discussion specific to AT&T can be found at:
http://forum.xda-developers.com/showthread.php?t=2931217
View the complete list of warnings, interfaces, and "namebrand" features
Additional information for AT&T version:
Potentially Unavailable:
Potentially Unsafe:
Incomplete / Inactive:
Figured I would get this set up since all it needs is a stock boot.img to start publishing builds
twistedumbrella said:
Figured I would get this set up since all it needs is a stock boot.img to start publishing builds
Click to expand...
Click to collapse
I'm not very knowledgeable on kernels, but don't we need root for this?
pr0cl1v1ty said:
I'm not very knowledgeable on kernels, but don't we need root for this?
Click to expand...
Click to collapse
Correct. But it is also possible to inject a kernel if a bootloader unlock isn't available.
You can download the stock boot.img from here:
https://drive.google.com/file/d/0B84GmjBmdnKpUjhWdi1tbC1GdDg/view?usp=sharing
twistedumbrella said:
Correct. But it is also possible to inject a kernel if a bootloader unlock isn't available.
Click to expand...
Click to collapse
So, help me out here... I am doing research on the kernel... basically it is like a pre-rooted thing? Wouldn't think trip knox? Thanks.
pr0cl1v1ty said:
So, help me out here... I am doing research on the kernel... basically it is like a pre-rooted thing? Wouldn't think trip knox? Thanks.
Click to expand...
Click to collapse
Rooting trips knox. By the time you get here you've already made your peace with that
Modified builds are uploading now. The stockish backups will be compiled later tonight.
Sent from my iPad using Tapatalk
I notice the builds are up. Just one question... How to flash this?
Monsi said:
I notice the builds are up. Just one question... How to flash this?
Click to expand...
Click to collapse
Read the part after the download link
You are the best! Just download starkissed....?
Anybody flash this yet? Never flashed a kernel before having root, so I'm a little outta my element here
brittoking said:
Anybody flash this yet? Never flashed a kernel before having root, so I'm a little outta my element here
Click to expand...
Click to collapse
You need to be rooted.
Sent from my iPad using Tapatalk
twistedumbrella said:
You need to be rooted.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Thank you for the quick reply. Haha I figured as much but they way the post is set up, it seemed like you could use heimdall to flash it. Knew it was too good to be true yet! Awesome work getting it set up already though
The fact that there's something posted in the development section for this phone gives me some hope that we'll achieve root soon.
silentecho13 said:
The fact that there's something posted in the development section for this phone gives me some hope that we'll achieve root soon.
Click to expand...
Click to collapse
Just to prevent any false hope, the configuration for the kernel was included with the T-Mobile version of the source so that is what made porting it so quickly possible. Root may not be as easy. I do hope it is, though.
Sent from my iPad using Tapatalk
So is this flashable on the At&t Note 4?
tampaboy1984 said:
So is this flashable on the At&t Note 4?
Click to expand...
Click to collapse
With the prerequisites (rooted, working Heimdall / copy of flashify), yes
There is a root method for the At&t Note 4 now?