The initial Wild Blood 1.0.7 had full effects and it ran bad on Tegra 3 devices (especially the slower ones like the Nexus 7)
Gameloft quickly botched the game with the v1.0.8 update and downgraded most effects to make it run well on Most Tegra 3 device
check this post for screenshots comparison and how to return your game to v1.0.7
Interestingly the game runs well on stock 2.17 kernel with gaming boost, yet it runs very bad on the One X gaming optimized kernels like Faux, Tegrastats revealed it's using only one core, without gaming boost it rarely crossed 50% load and with boost it rarely crosses 82% load, in other words this game is not using the Tegra 3 CPU at all
Not only it doesn't even begin to use the CPU, Gameloft still fails to optimize their games for the Tegra 3 GPU shortcomings for example Wildblood has an high level of Anisotropic filtering and our GPU is pixel fill rate bound, a reduction to this filtering could have been enough to relief the GPU instead of killing off all the effects
The very best way to play wildblood v1.0.7 is using the One X base 2.17 stock with gaming boost 2.1 or even better with the custom gaming enhanced stock 2.17 kernel
For some very specific reason it runs perfectly playable on this kernel even with full effects as long as you use gaming boost
However if you like to force this game to run well on custom kernels like faux and franco, continue with the following methods
Since this game and many Gameloft games don't uses Tegra 3 cores, we will want the maximum out of our single core
How to Run Wildblood and many Gameloft games at the maximum possible performance on custom One X kernels
First Method: Dual Core lock
- Download the latest Renovate Gaming boost
- Download any CPU control app like SetCPU
- First Enable boost in the gaming boost app, this will set the maximum background free memory and tweak the GPU
- Then change the CPU Governor to Performance mode using your CPU app, this will lock Tegra 3 to dual core mode at maximum clock speed, since two cores are disabled for safety in this governor you don't have to worry about overheating
Run Wildblood 1.0.7, you will notice it runs at least 2 to 3x the performance of default values
Recommended custom kernel for this method is Faux 11 mainline but also works with stock kernel, make sure you don't use an OC kernel since this method will push the device and you don't want it to overheat
OCed kernel might have issues with this method
Don't use this method and game on the charger otherwise your device might overheat
This tips is for non Tegra optimized games, using it with the THD games will surely cause high heat
Once you are done gaming disable boost mode and restore your CPU governor to ondemand to conserve your battery
Alternative method: Quad Core + Throttle lock
This is a much more aggressive method and will heat the device
for some reason the game runs in full quad core on the userspace governor using faux 12b1 and it runs over 30fps with full effects v1.0.7
we also need an OC kernel like faux' variant free this is because we don't want it to throttle all the way down to 1200MHz which always cause a massive drop in speed, I think its related to linked memory speed, so faux variant free or ultra or beta, will throttle to 1350
I didn't try any other kernel like stock but Franco doesn't have userspace and ondemand is only single core on this game, the stock kernel has userspace but I didn't try
so using faux 12b1 enable gaming boost 2.1
using setcpu or ur fav CPU app switch to userpace gov and Noop scheduler
set the min and max clock to 1400, this will lock to the throttle speed of 1350mhz at full quad
run the game and be surprised
u can reduce the lock a little if u feel its too hot, but don't set min below 900 because this governor has a mind if its own
In theory this should also work on stock kernel but it will lock to throttle speed of 1200mhz at full quad
Don't use this method and game on the charger otherwise your device might overheat
This tips is for non Tegra optimized games, using it with the THD games will surely cause high heat
Once you are done gaming disable boost mode and restore your CPU governor to ondemand to conserve your battery
This is cool to use on stock kernels?
Nice tip thanks hammy! XD
Any other CPU tuners worth mentioning? I'm skint atm and cant afford to pay for it XD
The-Last-Hylian said:
This is cool to use on stock kernels?
Nice tip thanks hammy! XD
Any other CPU tuners worth mentioning? I'm skint atm and cant afford to pay for it XD
Click to expand...
Click to collapse
yes tons of free CPU apps just search in google store, system tuner is one of them
AND YES it works on stock kernel, although it beyond me why you insist on not trying a custom kernel like faux (2 to 3x the frame rate in Beach buggy)
hamdir said:
yes tons of free CPU apps just search in google store, system tuner is one of them
AND YES it works on stock kernel, although it beyond me why you insist on not trying a custom kernel like faux (2 to 3x the frame rate in Beach buggy)
Click to expand...
Click to collapse
TBH I can't seem to ever get round to flashing a custom kernel, also I'm still not 100% confident enough to do it. I'm not sure on which kernel to flash tbh and I'll be jumping up to ARHD 11.1 soon so don't see the point until after then.
I haven't played beach buggy yet.
Nice tip, thanks a lot!
This method is working perfectly for Faux 11 mainline and the device remains so cool :laugh:
Hamdir,
It's possible to get full effects whit v1.0.8?
What for?
This update addresses performance problems experienced by some users on Tegra 3 devices (including Nexus 7).
The update is NOT required for non-Tegra devices.
Click to expand...
Click to collapse
They've changed only graphics, this update does not contain any bug fixes.
jamm513 said:
Hamdir,
It's possible to get full effects whit v1.0.8?
Click to expand...
Click to collapse
+1, updated to 1.0.8 since it went live - would be great if this can be done on this current version.:fingers-crossed:
krohme said:
+1, updated to 1.0.8 since it went live - would be great if this can be done on this current version.:fingers-crossed:
Click to expand...
Click to collapse
Both version is same, just for 1.0.8 version, they've decreased the graphic.. so hamdir just giving us how to revert back to 1.0.7 that hold full graphic enable for those have update to 1.0.8. So, this is the way to make it full effect enable.
@nashshafrulrezza im also getting freezes with the game, Faux11 mainline it's but not the kernel because i press home and i can exit the game, so i think there is something wrong with TB back of v1.0.7
extremely fun and smooth though , this method proves the real problem is that Gameloft is not using the CPU well
@everyone else v1.0.8 made the game smooth by killing effects so you don't really need this method, its only for those who want to play it with full effects enabled on v1.0.7
hamdir said:
@nashshafrulrezza im also getting freezes with the game, Faux11 mainline it's but not the kernel because i press home and i can exit the game, so i think there is something wrong with TB back of v1.0.8
extremely fun and smooth thought , this method proves the real problem is that Gameloft is not using the CPU well
@everyone else v1.0.8 made the game smooth by killing effects so you don't really need this method, its only for those who want to play it with full effects enabled on v1.0.7
Click to expand...
Click to collapse
Guess you out of luck too hamdir. Have you try it with franco? I'm not in mood to change kernel today, so hoping for others to report it.
nashshafrulrezza said:
Guess you out of luck too hamdir. Have you try it with franco? I'm not in mood to change kernel today, so hoping for others to report it.
Click to expand...
Click to collapse
no im sure it's the games fault, i remembered it also happened pre 1.0.8 update while i can play beach buggy with this method and it gets very hot but rock stable
plus didn't you hear? faux 11 mainline is now glued to my one X until JB source is released, me and my One X are exhausted :laugh:
hold on, i just remembered i have UV50, so next time i play ill try with out UV
anyway i don't think its the kernel fault, if the kernel the entire device would freeze and not just the game
hamdir said:
no im sure it's the games fault, i remembered it also happened pre 1.0.8 update while i can play beach buggy with this method and it gets very hot but rock stable
plus didn't you hear? faux 11 mainline is now glued to my one X until JB source is released, me and my One X are exhausted :laugh:
hold on, i just remembered i have UV50, so next time i play ill try with out UV
anyway i don't think its the kernel fault, if the kernel the entire device would freeze and not just the game
Click to expand...
Click to collapse
It just the same.. already try it without uv and it really working great at 1st.. then when it comes to lot monster stage.. the game hang as before.
Agree.. it's the game could be.. just need anyone to test it with latest franco.. cause before this, franco kernel working better when it comes to wildblood.. Maybe we'll found out an answer to this freeze problem.
BTW, I don't want to glued my HOX yet.. Still hoping for better gaming experienced. Not because gaming experienced is bad with our HOX but I'm just hoping gaming will last longer with our HOX, maybe same as iphone.
nashshafrulrezza said:
It just the same.. already try it without uv and it really working great at 1st.. then when it comes to lot monster stage.. the game hang as before.
Agree.. it's the game could be.. just need anyone to test it with latest franco.. cause before this, franco kernel working better when it comes to wildblood.. Maybe we'll found out an answer to this freeze problem.
BTW, I don't want to glued my HOX yet.. Still hoping for better gaming experienced. Not because gaming experienced is bad with our HOX but I'm just hoping gaming will last longer with our HOX, maybe same as iphone.
Click to expand...
Click to collapse
will last with all the focus Tegra is getting and not even a word about Tegra 4 so far
why dont u try Franco for us
but correct me if im wrong, when you had franco and no trouble before, you were using your own v1.0.8 and not my 1.0.7 TB
I did the tweaks: Enable Boost and Performance Mode
Beach Buggy Blitz is much smoother at full resolution. But the device still gets overheated I can blame either the chip in 'my' One x or like other people said the jb builds heat up while gaming.
I remember when playing beach buggy blitz normally without tweaks, the lag in the tunnel/dark areas was the most. With these tweaks the lag is barely there
Thanks Hamdir!
death__machine said:
I did the tweaks: Enable Boost and Performance Mode
Beach Buggy Blitz is much smoother at full resolution. But the device still gets overheated I can blame either the chip in 'my' One x or like other people said the jb builds heat up while gaming.
I remember when playing beach buggy blitz normally without tweaks, the lag in the tunnel/dark areas was the most. With these tweaks the lag is barely there
Thanks Hamdir!
Click to expand...
Click to collapse
While it works great, this tip is not intended for Beach buggy ill make it clear in the first post
beach buggy and other real Tegra games uses the CPU core and GPU pretty well and they get heated as they are with gaming boost
unlike wildblood which is barely pushing the GPU or the CPU, with this tip it remains very cool
so yea this tip is for wildblood 1.0.7 and maybe other non Tegra optimized games like the ones from GL
the JB kernel is confirmed by many as hotter (so far) if they didnt' fix this, our kernel gods will deal with it, of course this means waiting for the kernel source, once the OTA roles out ill be annoying HTC with requests about the kernel source on Elevate
This is why im now happy that my devices has Asian OTA and will gladly update later when the gaming situation is clear
Alright. Thanks once again.
hamdir said:
will last with all the focus Tegra is getting and not even a word about Tegra 4 so far
why dont u try Franco for us
but correct me if im wrong, when you had franco and no trouble before, you were using your own v1.0.8 and not my 1.0.7 TB
Click to expand...
Click to collapse
Nope, when I'm using Franco.. I'm owning the one from google play.. I'll test it after finish my work.. I really want to know the result.
nashshafrulrezza said:
Nope, when I'm using Franco.. I'm owning the one from google play.. I'll test it after finish my work.. I really want to know the result.
Click to expand...
Click to collapse
oh and maybe we should trying playing it for while without the performance gov on faux, to see if the gov is to blame (i know its hard lol)
Related
I have played the free version of Fruit Ninja THD and it is a little laggy sometimes. Is there anyone with the same problem? Maybe a solution?
I also played reckless racing 2, and the tar looks very very bad. I have uploaded the screenshot of reckless racing 2 to dropbox. The link http://dl.dropbox.com/u/78880032/Screenshot_2012-05-24-16-38-20.png
I know this sound stupid but on an ipod touch the graphics look better for Reckless racing 2 and Fruit ninja plays much smoother. Is this normal for a quad core beast?
timlambo said:
I have played the free version of Fruit Ninja THD and it is a little laggy sometimes. Is there anyone with the same problem? Maybe a solution?
I also played reckless racing 2, and the tar looks very very bad. I have uploaded the screenshot of reckless racing 2 to dropbox. The link http://dl.dropbox.com/u/78880032/Screenshot_2012-05-24-16-38-20.png
I know this sound stupid but on an ipod touch the graphics look better for Reckless racing 2 and Fruit ninja plays much smoother. Is this normal for a quad core beast?
Click to expand...
Click to collapse
Which software version is you One X running on?
Then dont Try Drag Racing with Tiresmoke Enabled
It Lags on my Hox so bad its Unbelievable
fekle said:
Which software version is you One X running on?
Click to expand...
Click to collapse
I'm running on Leedroid v6.00, with build number 1.29.401.7.
In one word, optimization.
Developers of these games didn't care enough (or weren't paid enough) to bother optimizing it for Tegra GPU.
Install Shadowgun on your HOX and let iPhoneys weep in tears of amazement.
PS: Ever tried installing an HD texture pack in Minecraft, along with a bunch of mods? It will lag like CRAZY, I'm talking around 25-30 fps. That's with i7 @ 3.2GHz and double gtx570. Engine just isn't using the hardware to its full potential (or ANY potential). Slow, inefficient drawing procedures, zero usage of actual GPU acceleration, most likely making CPU do all the work.
Shadowgun doesn't run that great on my One X and its pretty much nearly stock since I bought it.
Nit3m4re said:
Shadowgun doesn't run that great on my One X and its pretty much nearly stock since I bought it.
Click to expand...
Click to collapse
Shadowgun doesn't run so great??? Have you tried Shadowgun THD??? It's graphics are equal to the iPad 3! And the performance is superb, greatly optimized for Tegra3 devices and especially HOX. Go and try it! And my HOX is stock too! I've downloaded many games till now, and none were laggy.
Tegra GPU is overhyped, but it isn't the GPU performance, its the CPU scaling from the 4 cores at a low 'Mhz', put it to dual-core and it should run smoother.
MrPhilo said:
Tegra GPU is overhyped, but it isn't the GPU performance, its the CPU scaling from the 4 cores at a low 'Mhz', put it to dual-core and it should run smoother.
Click to expand...
Click to collapse
I don't know if it's "over-hyped" or not, but in my case, it sure as hell does far more than its job in every situation...
wrong the dual core trick is no good for quad games like shadowgun thd
all you have to do is root, download system tuner and switch to interactive governor when u game, the problem is the stock on-demand giv is tweaked fro battery saving
performance gov is also no good for quad optimized games eitherer, since it locks o dual core mode
with supercharger and interactive shadowngun thd is smooth like butter for me, s4
e2 is running pretty awesome too
hamdir said:
wrong the dual core trick is no good for quad games like shadowgun thd
all you have to do is root, download system tuner and switch to interactive governor when u game, the problem is the stock on-demand giv is tweaked fro battery saving
performance gov is also no good for quad optimized games eitherer, since it locks o dual core mode
with supercharger and interactive shadowngun thd is smooth like butter for me, s4
e2 is running pretty awesome too
Click to expand...
Click to collapse
waited soo long for your post
jonas2295 said:
waited soo long for your post
Click to expand...
Click to collapse
I think I'm gonna give up soon
hamdir said:
all you have to do is root, download system tuner and switch to interactive governor when u game, the problem is the stock on-demand giv is tweaked fro battery saving
Click to expand...
Click to collapse
+1 absolutely my experience as well.
If not enough you can try performance governor (locked dual core 1.4 no scaling)
Thanks eventually got fruit ninja to play smooth. Used the performance governor with supercharger. Playing smoother than an idevice for me.
Sent from my HTC One X using xda premium
Honestly. Should we be having to do such tweaks for a phone that is being marketed as the best gaming experience on a smartphone (see HTC keynote at E3)
The "new" iPad is marketed as a gaming device and I've not had to be tweaking anything or other to get my games smooth etc.
HTC must get their act together.
Sent from my iPad using Tapatalk HD
hamdir said:
wrong the dual core trick is no good for quad games like shadowgun thd
all you have to do is root, download system tuner and switch to interactive governor when u game, the problem is the stock on-demand giv is tweaked fro battery saving
performance gov is also no good for quad optimized games eitherer, since it locks o dual core mode
with supercharger and interactive shadowngun thd is smooth like butter for me, s4
e2 is running pretty awesome too
Click to expand...
Click to collapse
about tuning the interactive governor thingy, can we revert it back to the original settings after playing games?
mikey0105 said:
about tuning the interactive governor thingy, can we revert it back to the original settings after playing games?
Click to expand...
Click to collapse
Yes just change it back to ondemand using system tuner.
Sent from my HTC One X using xda premium
mikey0105 said:
about tuning the interactive governor thingy, can we revert it back to the original settings after playing games?
Click to expand...
Click to collapse
Yes you can. The performance governor is only for games which do not use all 4 cores. See which governor works best for you. The best governors for games is interactive and performance(Hamdir). You can switch back to ondemand when you're finished gaming. Also you might want to use supercharger/"development settings trick" to make sure only the game is running.
Sent from my HTC One X using xda premium
lt iibad said:
Honestly. Should we be having to do such tweaks for a phone that is being marketed as the best gaming experience on a smartphone (see HTC keynote at E3)
The "new" iPad is marketed as a gaming device and I've not had to be tweaking anything or other to get my games smooth etc.
HTC must get their act together.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
yes and no its not just HTC fault
to be honest i always had to do this governor switch with all my old android devices
i think its android fault + manufacturer fault + app developer fault (for not requesting full performance)
for example glowball immediately requests full performance quad mode without any tweaking
thanks for the quick response... what's this supercharger/"development settings trick"? how to do it?
Hi there, thinking about getting SetCPU - I have some questions before I do because I hear it can be dangerous?
- I've heard it can brick your phone?
- What if you set it too high?
- Do you personally have to monitor it?
- What are the benefits?
- Use alot of battery?
- Is it really worth using?
- Is it optimized for different phones - example the One X?
Thanks guys!
JDBurnie said:
Hi there, thinking about getting SetCPU - I have some questions before I do because I hear it can be dangerous?
- I've heard it can brick your phone?
- What if you set it too high?
- Do you personally have to monitor it?
- What are the benefits?
- Use alot of battery?
- Is it really worth using?
- Is it optimized for different phones - example the One X?
Thanks guys!
Click to expand...
Click to collapse
Hi, i have read that SetCPU cannot view all the cores i have read alot saying that System Tuner works fine you might want to try that.
I used to use SetCPU on my sensation and never hand any issues with it i did not monitor the app at all
Benefits allows overclocking if available in kernel
it can be overclocked and cause some issues such as overheating but if set correctly will be fine doesnt use much battery if any
and no i dont think you can brick your phone
if you set it too high i believe i had to reflash rom nothing major
BTW this is based on my own knowledge and usage
Hope this helps
Thanks man
JDBurnie said:
Thanks man
Click to expand...
Click to collapse
How much battery life can you save using setCPU?
lamenramen said:
How much battery life can you save using setCPU?
Click to expand...
Click to collapse
None in theory, if the CPU is slower it takes longer to go from
idle - process - idle
Faster speeds allow it to get it over and done with faster and get back to idle.
Of course it will at times stop the CPU going higher than it needs too which could save battery.
Under volting will save more batter then underclocking ever will.
Sent from my HTC One X using xda premium
SetCPU can not see Tegra 3 yet
Use System Tuner and its free
hamdir said:
SetCPU can not see Tegra 3 yet
Use System Tuner and its free
Click to expand...
Click to collapse
Thanks. I have system tuner, but what do I need to do in order to improve battery life?
I have set the governor to powersave. Is there anything else? How would I undervolt using this app?
lamenramen said:
Thanks. I have system tuner, but what do I need to do in order to improve battery life?
I have set the governor to powersave. Is there anything else? How would I undervolt using this app?
Click to expand...
Click to collapse
undervolting requires your phones kernel to support it, currently on these forums there is only one that does but i haven't tested it, sticking firm to the "stock kernel is best" and will do untill the kernels have more time to mature.
you could limit your max speed to 1 GHz, if you are rooted you can use Core control to turn off cores and run your phone as a dual core.
treebill said:
undervolting requires your phones kernel to support it, currently on these forums there is only one that does but i haven't tested it, sticking firm to the "stock kernel is best" and will do untill the kernels have more time to mature.
you could limit your max speed to 1 GHz, if you are rooted you can use Core control to turn off cores and run your phone as a dual core.
Click to expand...
Click to collapse
Not to be lazy, but would running the phone as dual core and limiting it to 1 ghz result in a perceptible battery savings? I'm trying to get a feel for how much I should expect custom ROMs to make my One X perform up to par. Thus far, I've installed two custom ROMs and felt like the improvements were all safely in the minor category.
I did install cyanogenmod 7 on a phone last year wow, that resulted in major benefits.
lamenramen said:
Not to be lazy, but would running the phone as dual core and limiting it to 1 ghz result in a perceptible battery savings? I'm trying to get a feel for how much I should expect custom ROMs to make my One X perform up to par. Thus far, I've installed two custom ROMs and felt like the improvements were all safely in the minor category.
I did install cyanogenmod 7 on a phone last year wow, that resulted in major benefits.
Click to expand...
Click to collapse
Running on 2 cores stops the phone from using and 2 cores uses less power then 4, playing games and using all cores is over kill 2 cores will run the game without lag use less power and make less heat.
You'll maybe get 10% from doing that but I haven't tested.
Really the only time any of this saves battery is during demanding programs, tegrea has a super low power companion core, for all your power saving needs.
Sent from my HTC One X using xda premium
I tried conservative governor while downloading sd files for Nova3 gave execllent results
I strongly advice not to undervolt tegra3
t3 is not like any other chip and UV or OC should not be attempted
OC because the chip is already at the max of its thermals
UV for the same reason n might end up with problems like flicker
changing governors and UC should be enough
So i am using trinity's stable kernel on 1.2 ondemand gov and deadline i/o sched. My question is: why am I havving terrible performance for example after playing like 10-15 mins subway surfers? It works really nice until i get like 600.000 points,after that I barely can see what's happening,verry low fps especially when i'm touching the screen(might this be i/o related?). So,does anyone have the same issues? Can someone tell me the optimal kernel/freq/gov and i/o sched? And btw i'm on cna 3.8.0 if that's helping with anything.
calinoii said:
So i am using trinity's stable kernel on 1.2 ondemand gov and deadline i/o sched. My question is: why am I havving terrible performance for example after playing like 10-15 mins subway surfers? It works really nice until i get like 600.000 points,after that I barely can see what's happening,verry low fps especially when i'm touching the screen(might this be i/o related?). So,does anyone have the same issues? Can someone tell me the optimal kernel/freq/gov and i/o sched? And btw i'm on cna 3.8.0 if that's helping with anything.
Click to expand...
Click to collapse
CNA 3.8.0 is based on android 4.1.2 and there are many stable trinity kernels for 4.1.2. Each with different clock speed for CPU and GPU. So which one are you using? Try another one with higher GPU. There is one with 1420MHz CPU and 512MHz GPU so give it a try if you are not already using it
I'm using the 1420 Mhz CPU and 384 Mhz GPU because of the battery drain in the 512Mhz GPU one. I already have issues with my battery drain cause my phone is thinking that it's charging and my screen is turned on almost non stop so...
calinoii said:
I'm using the 1420 Mhz CPU and 384 Mhz GPU because of the battery drain in the 512Mhz GPU one. I already have issues with my battery drain cause my phone is thinking that it's charging and my screen is turned on almost non stop so...
Click to expand...
Click to collapse
What about trying the 512 GPU for a little while just to confirm whether the performance still drops after 600,000 or it will be fine???
Accordingly, I hope we will be able to narrow the cause of this lag
Hope you reach a higher score this time
I'll do this tomorrow at work and i will post the results,now i need some sleep
try a 1344mhz kernel or a 1536mhz trinity kernel. for some reason many devices dont like 1420mhz.
simms22 said:
try a 1344mhz kernel or a 1536mhz trinity kernel. for some reason many devices dont like 1420mhz.
Click to expand...
Click to collapse
Same thing for me I tought nexus has a good performance,and it's also oc to 1500...what should i do?
calinoii said:
Same thing for me I tought nexus has a good performance,and it's also oc to 1500...what should i do?
Click to expand...
Click to collapse
Actually I play the same game nowadays but never reached this 600,000+ score. Generally I noticed that the game is not as smooth as it used to be before the last update with christmas theme. Only yesterday I checked the settings and there is an option to turn this new christmas theme (called Holiday Theme) off. I don't think that the power in GNex is not enough to run this game, but maybe this new theme is having some bugs causing this lag. So try turning it off and see if you still face the same lag you are talking about
Ok so I noticed that not only when I'm playing Subway surfers the phone is lagging but when I'm in the drawer or just switching between the screens...I'm on franco's r300 kernel with 384Mhz GPU. So,what' wrong with my phone?
calinoii said:
Ok so I noticed that not only when I'm playing Subway surfers the phone is lagging but when I'm in the drawer or just switching between the screens...I'm on franco's r300 kernel with 384Mhz GPU. So,what' wrong with my phone?
Click to expand...
Click to collapse
I don't think there is anything wrong with your phone. It is not very weird to get lags from time to time while using the phone, so please make it easier on yourself
My advice is to try different ROMs and kernels until you are satisfied
Any sugestions for something nice ?
calinoii said:
Any sugestions for something nice ?
Click to expand...
Click to collapse
I can't help you in ROMs because I didn't try any but using my own AOSP one. As for kernels, I always used Trinity and it is very fine with me.
Just search around for other users' experiences and mostly you will find something attractive to your liking
My phone is perfect right now in every way except for the tiny little video lag i get in pocket legends. Question:
Is there a good kernel for GPU overclocking besides just the usual CPU overclocks? I heard you can overclock the GPU from 400 to 800, is this correct? If so what kernel and on what rom, also does STweaks work with it?
Has anyone overclocked their GPU to 700-800mhz, did they notice a difference playing 3d games like pocket legends?
I dont really want to blow my phones config if its not worth it, its working so perfect right now with the free tether app (which only crashes my wifi radio on occasion). Other then that it is solid, no crashes no freezes, smooth as a babies first sword.
Alot of viewers in just the little bit of time this thread has been, people want to know
I've compiled Resurrection Remix with over clocked CPU (@2.2ghz) and GPU (@800mhz) and it's not that much of an improvement. I'd say PUBG runs little better now and some improvement in benchmarks. Well, I wasn't expecting miracles either but let me know if anyone wants an over clocked ROM or kernel. I am trying to add exfat support (I'd be happy if any devs can help me with that) as many user wants but I'm getting nowhere for now.
I can even take it to next level with CPU @2.4ghz and GPU @850mhz but I think that would be overkill.
I'm interested
How is the battery life?
Pitagoras2000 said:
I'm interested
How is the battery life?
Click to expand...
Click to collapse
I think it's little less than the stock ROM but now it depletes faster while gaming (as gaming pushes all cores to max).
Manish355 said:
I think it's little less than the stock ROM but now it depletes faster while gaming (as gaming pushes all cores to max).
Click to expand...
Click to collapse
Nice. That kernel would be great to VR
Well , good idea is to make only OC kernel and then setup it via kerenel audiutor eg. -- OC @ gpu would be nice because it is weakest part of MZP . I've just made benchmark on stock oreo antutu 7.1.3 = 75716 pts. while on latest Cosmos 3.2 rom result was 81703 pts.
i would be interested in a undervolting one
JonasVFC said:
i would be interested in a undervolting one
Click to expand...
Click to collapse
Yeah, that would be interested. I was playing wirh that, I think it was, Atrix time... Don't expect miracles but could add a bit to battery life. And a bit more in freezing the phone or crashing the apps
Sent from my XT1635-02 using Tapatalk
Zeljko1234 said:
Yeah, that would be interested. I was playing wirh that, I think it was, Atrix time... Don't expect miracles but could add a bit to battery life. And a bit more in freezing the phone or crashing the apps
Click to expand...
Click to collapse
Under volting is not a good idea, it creates a lot of issues. To increase battery life use smart pixels, build prop tweaks and also amplify and greenify. However for screen on time, lowering resolution and smart pixels are best options.
sebx_g1 said:
Well , good idea is to make only OC kernel and then setup it via kerenel audiutor eg. -- OC @ gpu would be nice because it is weakest part of MZP . I've just made benchmark on stock oreo antutu 7.1.3 = 75716 pts. while on latest Cosmos 3.2 rom result was 81703 pts.
Click to expand...
Click to collapse
Yeah, nice idea
I think stock runs on 8.0 while Cosmos on 8.1 so that might've improved it somewhat,
I wish if there was some tweak to OC GPU of normal ROM.
Manish355 said:
I've compiled Resurrection Remix with over clocked CPU (@2.2ghz) and GPU (@800mhz) and it's not that much of an improvement. I'd say PUBG runs little better now and some improvement in benchmarks. Well, I wasn't expecting miracles either but let me know if anyone wants an over clocked ROM or kernel. I am trying to add exfat support (I'd be happy if any devs can help me with that) as many user wants but I'm getting nowhere for now.
Click to expand...
Click to collapse
I think a kernel with overclocking possibilities would be nice. In fact, what I would really love was to see a port of Elemental X or Blu Spark kernels.