[ROM][STOCK][CWM Flashable] - Samsung Galaxy W I8150

THIS THREAD IS NOW DISCONTINUED
------------------------------------------------------------------------------------------------
NOTE: BECAUSE OF MY PHONE WAS STOLEN, I WILL NOT TESTING AGAIN..
Hi there friends! I've succesfully made stock roms to be flashable via CWM. for those who stucked, and can't use ODIN, can use this as alternative..
IF YOU HAD SOME BRICK (can't access recovery or etc), DON'T FLASH STOCK ROM WITH THIS!! USE ODIN TO RECOVER YOUR PHONE!! AND DON'T USE THIS ZIP. DOWNLOAD FROM SAMMOBILE
How to flash:
- Use ClockWorkMod Recovery v6.0.1.2 or lower version, how to flash this, refer to this thread ~> [GUIDE] How to Flash ClockWorkMod (CWM) with Terminal Emulator by me, or by "MyDestinate" ~> [GUIDE] How to flash CWM6 with Odin for SGW
- "wipe data/factory reset"
- "mounts and storage" ~> "format /system"
- install zip from sdcard
- find your zip
- flash it
OR
refer to this thread for instructions ~> Rooting, ClockworkMod and Custom ROMs...an A to Z beginners Guide (by keithross39)
features:
- UNTOUCHED = NO ROOT, NO BUSYBOX, EVERYTHING STOCK
- UPDATED SYSTEM APPS: GameHub, Google Mail, Adobe Flash Player, Kies Air, Google Maps, PlayStore, Google+ Plus, Samsung Apps, Street View for Google Maps, TalkBack, Google Voice Search, YouTube (Updated at 14 Oct 2012)
- GooglePlay Services and SAMSUNG Services INJECTED TO SYSTEM APP
- Not changing your baseband, so every ROM region can be used every where, your baseband keeps same
NOTICE:
- THIS WILL NOT CHANGE YOUR BASEBAND
- THIS WILL NOT CHANGE YOUR RECOVERY
- want to change your baseband? refer to this thread ~> [HOW TO] Extracting baseband from .tar.md5 ROM by yewsiong
- want to fully flash back to stock? needs ODIN ~> [HowTo] Flash a firmware with ODIN on Samsung Galaxy W(I8150) by THE-E
NOTE: THIS ROMs ARE NOT ROOTED!
IF YOU WANT TO ROOT, SEE MY THREAD ~> HERE
THIS VERSION IS , The newest ROM in Nordic Countries (Europe)
~~~>>>DOWNLOAD HERE<<<~~~
(Google Docs)
THIS VERSION IS DXLM3, The newest ROM in South East Asia
~~~>>>DOWNLOAD HERE<<<~~~
(Google Docs)
THIS VERSION IS ZCLG1, The newest ROM in China-Hong Kong-Taiwan
~~~>>>DOWNLOAD HERE<<<~~~
(Google Docs)
I tested everything and it's fine, so I NOT RESPONSIBLE IF YOUR PHONE BRICKED
special thanks:
- acro68 (gives me inspiration to help people having Galaxy W and for his CWM Recovery and CM9)
- yewsiong (using Cygwin terminal, and gave me logic to use dsixda's Android Kitchen)
- Brian_SGW_CM9 (gives me ideas)
- pepoluan (gives me ideas with /dev/block partition for baseband, boot, and other things)
- dsixda (for his Android Kitchen)
- MyDestinate who gives instruction for flashing CWM via ODIN
- keithross39 for his sticky thread for flashing ROMs..
- THE-E for his posts that refers to ODIN and rooting
- every people who gave me ideas and inspiration that I can't mention
- developers on XDA..
- you guys on XDA
if there's no you guys, I can't do such this thing..
HAVE A GOOD DAY!

IvanKurnia said:
Hi there friends! I've succesfully made stock roms to be flashable via CWM. for those who stucked, and can't use ODIN, can use this as alternative..
How to flash:
- Use [RECOVERY] ClockWorkMod v6.0.1.2 Recovery or lower version, how to flash this, refer to this thread ~> [GUIDE] How to Flash ClockWorkMod (CWM) with Terminal Emulator by me, or by "MyDestinate" ~> [GUIDE] How to flash CWM6 with Odin for SGW
- "wipe data/factory reset"
- "mounts and storage" ~> "format /system"
- install zip from sdcard
- find your zip
- flash it
OR
refer to this thread for instructions ~> Rooting, ClockworkMod and Custom ROMs...an A to Z beginners Guide (by keithross39)
features:
- UNTOUCHED = NO ROOT, NO BUSYBOX, EVERYTHING STOCK
- UPDATED SYSTEM APPS: GameHub, Google Mail, Adobe Flash Player, Kies Air, Google Maps, PlayStore, Google+ Plus, Samsung Apps, Street View for Google Maps, TalkBack, Google Voice Search, YouTube (Updated at 14 Oct 2012)
- GooglePlay Services and SAMSUNG Services INJECTED TO SYSTEM APP
- Not changing your baseband, so every ROM region can be used every where, your baseband keeps same
NOTICE!:
- THIS WILL NOT CHANGE YOUR BASEBAND
- THIS WILL NOT CHANGE YOUR RECOVERY
- if you want to root with CWM (I didn't test this, so it's your own risk), mount /system, /data,/and cache first.. link ~> [HowTo] Root/Unroot Samsung Galaxy W (I8150) by THE-E
- want to change your baseband? refer to this thread ~> [HOW TO] Extracting baseband from .tar.md5 ROM by yewsiong
- want to fully flash back to stock? needs ODIN ~> [HowTo] Flash a firmware with ODIN on Samsung Galaxy W(I8150) by THE-E
CURRENTLY, only one ROM I uploaded, MORE REGIONS TO COME!
THIS VERSION IS XXLMD, The newest ROM on Nordic Countries (Europe)
~~~>>>DOWNLOAD HERE
Click to expand...
Click to collapse
great job. do you use dsixda kitcheh for this?

hadidjapri said:
great job. do you use dsixda kitcheh for this?
Click to expand...
Click to collapse
oh i didn't give you much ideas... i just gave u a useless link XD
thanks a lot for your work and time!

hadidjapri said:
great job. do you use dsixda kitcheh for this?
Click to expand...
Click to collapse
yes haha
Brian_SGW_CM9 said:
oh i didn't give you much ideas... i just gave u a useless link XD
thanks a lot for your work and time!
Click to expand...
Click to collapse
ah! haha but I think you've helped me

IvanKurnia said:
yes haha
ah! haha but I think you've helped me
Click to expand...
Click to collapse
this will surely helped people who are lazy to flash from odin
just reminder, people will still need odin incase they can't access their recovery mode
Sent from my GT-I8150 using xda premium

yes. But did you see the first paragraph on my first post? What did it says? "for people who stucked and can't use odin" yeah there
But ok it's noted. I'll edit and add those to "notice" on my post

Wrong

Wrong what?
Hey friends, sorry that the first post is messed up.. I'll fix it later when I using PC
EDIT: I've finished fix it!!

IvanKurnia said:
Wrong what?
Hey friends, sorry that the first post is messed up.. I'll fix it later when I using PC
EDIT: I've finished fix it!!
Click to expand...
Click to collapse
What changed?
Pressing "Thanks" button will be much appreciated if user's posts useful for you

reddvilzz said:
What changed?
Pressing "Thanks" button will be much appreciated if user's posts useful for you
Click to expand...
Click to collapse
no, exactly nothing.. hehehe but before, the first post messed up, I edited it with my phone.. then I restore my previous post before edit

DXLM3 is ready and tested! If I can I will upload as soon as possible.. uploading in Indonesia for 300Mb takes up +6 hours

great work Bro..
downloading.. for next time use
THANKS

awesome job my friend.
already dwnloaded for future use.
once again good job
Sent from my GT-I8150 using xda app-developers app

Whoa... saw my name there... what did I do?
Aaanyways, I'm bookmarking this thread, just in case
-- GT-I8150 + DXKL1 + CM9b3 + xda --

Thanks for the link to my thread Ivan...and Congrats on this one...gonna bookmark when I get on my PC....
From my Galaxy W on CM9 and CWM6 with Tapatalk 2

Any new firmware for this kind of baseband xxlmb?
I need a firmware because i flash my phone into a custom rom and my back up firmware is already deleted..
Thanks
Sent from my GT-I8150 using xda premium

sorry mate.. if I not wrong, XXLMD is update for XXLMB.. and I will not make older version.. just the newest..
I've tried to upload DXLM3 but it was failed -_- will do it again another day

IvanKurnia said:
sorry mate.. if I not wrong, XXLMD is update for XXLMB.. and I will not make older version.. just the newest..
I've tried to upload DXLM3 but it was failed -_- will do it again another day
Click to expand...
Click to collapse
Ok thanks for the info
By the way can i use any stock rom whenever my baseband is not same to the stock rom??
Sent from my GT-I8150 using xda premium

yes.. you can

Related

[ROM] NO SENSE: 4/Aug 2.15.531.3 r1 - HTC Vision Stock ROM (rooted/radio/de-odexed)

I'm pleased to present my repack of the stock ROM for the HTC Vision! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know.
Remember that if you use this ROM, you do so entirely at your own risk!!
About MoDaCo stock ROM repacks
Unlike a MCR (MoDaCo Custom ROM) release, a stock ROM repack is as close to the stock ROM as possible. Only root / Superuser and an insecure boot image is added. The benefits of the repack are providing a rollback option in update zip format as well as providing an online kitchen to remove parts that are not required.
A MCR release of this ROM is also available!
Requirements
In order to use this ROM on your device, you must have a custom recovery image installed (Clockwork Mod).
THIS ROM SHOULD RUN ON BOTH THE G2 AND THE DESIRE Z!
Features
Repack of the 2.15.531.3 (OTA) Gingerbread ROM
Pre-rooted with su and Superuser Permissions by ChainsDD
Insecure boot image (ro.secure=0)
Changelog
Please see 2 posts below this one for the changes in each release.
Installation
To install this ROM:
Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card
Restart your device in recovery mode
PERFORM A NANDROID BACKUP FROM THE MENU
Select the option to apply an update zip, and select the zip file you copied to your memory card
Upgrading
No wipe is explicitly required in order to use this ROM (you should be particularly safe if coming from a near-stock ROM), however if you do encounter issues of any kind, it is recommended that you wipe your device and reproduce the issue before raising it here.
Downloads
The ROM is packaged for installation via ClockworkMod. The radio / baseband is packaged for installation via either renaming to PC10IMG.zip and copying to SD card then rebooting to bootloader or by 'fastboot flash'ing the radio (both of which will likely require your device to be 'S-OFF / ENG' bootloader).
A MCR will follow soon.
[Edit: It looks like Mediafire are having some issues with redirects atm, if you get a 404, give it a few tries!]
ROM 2.15.531.3 - DOWNLOAD - MD5: e4043e741d75dfc7e3771ff457f6c49d
ROM 2.15.531.3 de-odexed - DOWNLOAD - MD5: 7e878091f419a4d518cdc0c8a4bfedf8
Radio / Baseband 26.08.04.30_M3 - DOWNLOAD - MD5: 54df99c578a0cc1b39b7fc6911ef8ec4
Thanks
It's impossible to mention everyone who contributes to the Android community by name, but to everyone out there who does great work and shares it with us all - you have my gratitude and respect.
And finally...
Details on how to donate should you wish to do so are in download topic at MoDaCo.
Enjoy!
P
OMG I LOVE YOU SO MUCH. To clarify, we can install this just like any other rom right? Does not have to be on top of stock froyo?
Yeah, you can flash it on top of anything. Usual caveats apply, backup first blah blah etc. etc.
P
paulobrien said:
Yeah, you can flash it on top of anything. Usual caveats apply, backup first blah blah etc. etc.
P
Click to expand...
Click to collapse
Thank you so much. I'm sure there are lots of people that are gonna be very happy when they see this
Paul, the download link for the ROM isn't working for me. I can get through the text verification, but then the download fails. Any idea?
edit: nevermind, worked on 3rd try
tun4f1sh said:
Paul, the download link for the ROM isn't working for me. I can get through the text verification, but then the download fails. Any idea?
edit: nevermind, worked on 3rd try
Click to expand...
Click to collapse
Yes, it looks like Mediafire have some issues atm.
P
De-odexed version now online!
P
Nice work! Tyvm
Sent from my HTC Vision using XDA App
Can you elaborate on the "uncensored" DNS servers? What's wrong with the defaults? Is it easy to revert to the defaults?
Paul, can you clarify if this requires you to be running the last FroYo tmo OTA? Or can this be flashed from a clean wipe? I looked at the file system in the zip, and it looks like a full ROM, but I just flashed the odex'd version and got stuck at the HTC splash. Thanks man.
its a full rom i cleaned wiped & flash the deodex & it runs great so far
Love this ROM. Super clean &fast. I just have 2 questions. 1 Is there a taptowake link some one can send me or post. 2 do I really need to flash the new baseband & radio seems fine without it.
Duplicate Post
Lockedown said:
Can you elaborate on the "uncensored" DNS servers? What's wrong with the defaults? Is it easy to revert to the defaults?
Click to expand...
Click to collapse
Uh what?
P
paulobrien said:
Uh what?
P
Click to expand...
Click to collapse
Is it required to flash baseband & radio & could you post a link or anyone else for taptowake?
tun4f1sh said:
Paul, can you clarify if this requires you to be running the last FroYo tmo OTA? Or can this be flashed from a clean wipe? I looked at the file system in the zip, and it looks like a full ROM, but I just flashed the odex'd version and got stuck at the HTC splash. Thanks man.
Click to expand...
Click to collapse
You can flash this on top of anything, probably without wiping if coming from a near stock build as the actual ota is non wipe.
P
Vandale said:
Is it required to flash baseband & radio & could you post a link or anyone else for taptowake?
Click to expand...
Click to collapse
Baseband / radio recommended.
P
Vandale said:
Love this ROM. Super clean &fast. I just have 2 questions. 1 Is there a taptowake link some one can send me or post. 2 do I really need to flash the new baseband & radio seems fine without it.
Click to expand...
Click to collapse
Its not ABSOLUTELY NECESSARY BUT they built this rom to work SPECIFICALLY with that radio. So why not have it work at 100%?
paulobrien said:
Uh what?
P
Click to expand...
Click to collapse
The uncensored DNS servers was listed in the original thread:
http://forum.xda-developers.com/showpost.php?p=16322309&postcount=466
Also, anyone on rooted stock 2.2 tried this?

[HOW TO] Deodexing the note2 international version

EDIT* After trying for so much on learning how to deodex a rom I finally found the way to do it. I take NO credit for what I'm going to post. i Found this tutorial browsing and searching online for a while and thanks to WANAM for telling me he uses dsinxda to deodex his roms. and DSIXDA for making the tool. Im just going to post the steps I did in order to get my stock rom deodexed. If I make a mistake or use wrong any term please forgive me I'm learning as you are. I just want to help you guys to be able to deodex your rom. I'M NOT GOING TO POST DOWNLOAD LINKS, JUST THE THREADS WHERE YOU NEED TO GO AND DOWNLOAD EVERYTHING FOR YOURSELF. (This to avoid issues with OP of other threads)
DOWNLOAD YOUR STOCK ROM IN A FORMAT TO BE FLASHED BY ODIN. GO TO http://sammobile.com and download your rom. After you have it REMOVE the .md5 at the end. Leave it as .tar
First of all you need to have java, android SDK installed and adb. for this FIRST OF ALL go here and follow the steps
STEP 1 http://www.support-4-you.com/main/i...d-adb-installation&catid=40:how-tos&Itemid=57
http://www.dummies.com/how-to/content/downloading-and-installing-the-java-development-ki.html
Afterwards go here and read a little bit. It will give you an overall of what you need http://forum.xda-developers.com/showthread.php?t=1939300 (Yeah I now is for the s3 BUT BELIEVE ME IT WORKS) leave it open just in case.
then visit this thread
http://forum.xda-developers.com/showthread.php?t=633246 and READ IT!
-Download the kitchen and afterward go to post number 3 to install it, I used the option number one for windows 7. i downloaded dsixda_cygwin_install.zip. If you have other operating system I honestly don't know how to do it.
Also click where it says ''RECOMMENDED: Click here for a pictorial guide to assist you with the Cygwin install (thanks to carl1961).'', it will give you a tutorial on how to install the kitchen. Be patient. sometimes you make the steps and it seems is not doing anything, but its working it's just slow.
follow that pic guide on how to install and when you're setting up your rom when it opens the ext2explore tool you dont see your system.img close the kitchen and delete the working folder and start again setting it up and it will work. (at least for me, the 1st time i had no ext4_system.img, the second time I did)
VERY IMPORTANT. After you extract the system, EXTRACT THE CSC If not your rom WON'T WORK.
(Diskinternals linux reader is found on the kitchen folder, then tools. FYI)
ok. after you have Installed the kitchen and the working folder is ready
go to the working folder and delete ext4_system.img from system folder if there is any. Then
-Choose option 0- Advanced Options
-Then choose option 11 Deodex files in your rom
-Then ''bb'' IF YOU WANT
-Then ''v'' and set android level to 16
-then option ''b'' and sit back and wait.
-Then option ''x'' when it's done
-Choose option 99 and follow the steps. remember to zipalign the apps and sign your rom, then change the name of the rom if you want.
- I did not rooted my rom. i use the method 2 from here http://forum.xda-developers.com/showthread.php?t=1896696 to root it aftwerwards. :fingers-crossed:
FINAL STEP! MANDATORY! PLEASE PRESS THANKS IF THIS POST HELPED YOU! :good: :victory: :highfive:
Then copy the rom to your external sd and wipe data, cache , dalvik and go to mount and storage and format system.
go back and flash rom from external sd.
:angel: there you go, your deodexed rom! :fingers-crossed:
I hope this have been helpfull
Hi I have a stick rom that is deodexed and I use this works like a charm
http://forum.xda-developers.com/showthread.php?t=1953705
Hope it helps
Sent from my GT-N7100 using xda premium
Thanks this id the one that I plan to use after I deodex my rom
I was able to deodex my rom with dsixda! Thanks to wanam for showing me that tool.
plotinus said:
I was able to deodex my rom with dsixda! Thanks to wanam for showing me that tool.
Click to expand...
Click to collapse
Can you explain how to do it ? I mean, how can we do it ?
Laynee1 said:
Can you explain how to do it ? I mean, how can we do it ?
Click to expand...
Click to collapse
Of course. Im working but let me get home and i will post exactly what i did
plotinus said:
Of course. Im working but let me get home and i will post exactly what i did
Click to expand...
Click to collapse
Thanks in advance mate!
Waiting for your reply
Sent from my GT-N7100 using xda premium
THREAD UPDATED. enjoy
Thanks a lot mate.. Due to my exam obligations, ill do this bit later.
Still, thanks! You are awsome..
P.s. And thanks to wanam and rest devs who created threads that this post is reffering to!
Sent from my GT-N7100 using xda premium
Laynee1 said:
Thanks a lot mate.. Due to my exam obligations, ill do this bit later.
Still, thanks! You are awsome..
P.s. And thanks to wanam and rest devs who created threads that this post is reffering to!
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Ok excellent good luck in the exams! Let me know how it goes once you do it

[Tutorial][primou gsm] POmega installation tips & tricks...

Some will say, this tutorial is the same as this (input &%/$% of your choice) did for Shpongle rom!!!
Well, like I wrote in tutorial for Shpongle rom: "It should work with Primou POmega...", but, unfortunately, no one seems to read or remember that.
So, YES, almost the same tutorial, but, as usual, for some, title is important
OK, that's what you can do with your hov, primou gsm. I did! With latest TWRP recovery. Link: http://techerrata.com/browse/twrp2/primou
First of all, you are already rooted!!! If not, follow guidelines on XDA, like: http://forum.xda-developers.com/showthread.php?t=1598964 and http://forum.xda-developers.com/showthread.php?t=1713257 or use WinDroid HTC One V Toolkit: http://forum.xda-developers.com/showthread.php?t=2471243
Second, NO GUARANTEE at all that your hov is like mine!!! So, if you do anything, here's a touch: I'm not responsible for burning, bricking, destroying, misplacing, loosing, exploding, leaking poison or whatever possible and impossible YOUR hov will do!
1. Download latest POmega rom, http://forum.xda-developers.com/showthread.php?t=2600510. Yeah, also gapps - choose one: http://www.androidfilehost.com/?w=files&flid=5649 (or, my favourite, Slim gapps: http://forum.xda-developers.com/showthread.php?t=2265564.
And kernel: http://d-h.st/gEg. I personally use Ironman Kernel: http://forum.xda-developers.com/showthread.php?t=2367804 It's up to you..., both working like a charm!
2, Factory reset/Nandroid backup or else... Copy all backups to PC or cloud!
3. Backup sd card to pc
4. Reboot into recovery
5. In recovery, wipe system and everything else in advanced wipe, everything, sdcard included!!!
6. In recovery, copy backup of sd card from pc to phone sd card (POmega, backups, gapps and everything else you want, of course). If you don't know how to mount sdcard in twrp, ignore this tutorial or learn first how to do that…
7. Flash kernel with: http://forum.xda-developers.com/showthread.php?t=1747168. Program is discontinued, but working like a charm!!! THANKS shubhamchamaria. Now, of course, you can use also WinDroid HTC One V Toolkit: http://forum.xda-developers.com/showthread.php?t=2471243 THANKS WindyCityRockr or Android Ultimate Toolbox Pro: http://forum.xda-developers.com/showthread.php?t=1886562 THANKS despotovski01. It's up to you which tool U use, not just for kernel install, also for recovery, apks...
8. Boot into recovery
9. Flash latest POmega rom
10. Reboot system
11. Reboot recovery
12. Some say, that it's better to flash kernel AFTER flashing rom. Up to you, try and see, I didn't...
13. Reboot recovery
14. Flash gapps
15. Reboot system
16. Add whatever apk you need... and you're on your own...I restored all apps from backup that I did with Android Ultimate Toolbox Pro. Link already somewhere in this post... :angel:
17. Install one app with which you can uninstall or freeze system apps... Which app it will be, it's up to you, search around a bit... Then uninstall or freeze what you don't need. One by one and not important ones... You'll learn by mistakes...
Then install (I installed in that order, rebooting into recovery and wiping cache/dalvik between installs) :
- V6 SuperCharger: http://forum.xda-developers.com/showthread.php?t=991276 Awsome!!! Thanks zeppelinrox!!! Read carefully!!!. Sorry if you brick your hov, your fault!
IMPORTANT: POmega rom has Fly-On Mod Tweaks included. So you have to uninstall them first, before installing V6 Supercharger. If you don't know how, it's better to skip installation of V6!
- Turbo boost: http://forum.xda-developers.com/showthread.php?t=2145133 Triple swap, recommended values… (Edit: use guideline in post #4 of Shpongle rom tutorial, if you experience any trouble. BIG THANKS to nereis) also, some users suggest to use just 50 MB in /cache. I still have 75 and everything working well, but... SOME SUGGEST that SwapItOn is better: http://forum.xda-developers.com/showthread.php?t=2359182 - up to you!
- CrossBreeder: http://forum.xda-developers.com/showthread.php?t=2113150, don't touch a thing, unless you know why…
- Viper4Android FX (sound) http://forum.xda-developers.com/showthread.php?t=2191223 Yes, XHiFi is already in rom, but you can have both...
- The New Pure Audio: http://forum.xda-developers.com/showthread.php?t=2293589 YES, it's working GREAT with V4A If your hov protests, put V4A in compatibility mode...
- One Power Guard (battery) – still the best, forget other battery apps… http://forum.xda-developers.com/showthread.php?t=1947559 - - NOW EVEN BETTER: http://forum.xda-developers.com/showthread.php?p=47760222 Some users said that there are better battery apps out there... Please, use them, I just like that, because it's working for me...
For 3rd party camera, install what you like, here's the thread: http://forum.xda-developers.com/showthread.php?t=2314084
Also XblastTools are great: http://forum.xda-developers.com/showthread.php?t=2294419. You can tweak, well, a lot...
However, GravitiBox (included in POmega) and XblastTools are almost (I said almost) identical, so you can choose just one (works for me, just one, but I will not tell which one).
I DID ALSO FOLLOWING (PLEASE, PLEASE, you're doing that on YOUR OWN):
While on POmega and HellBoy/Ironman kernel, you can (please in THAT order):
- S-OFF: http://forum.xda-developers.com/showthread.php?t=2558740
- Remove Red Text: http://forum.xda-developers.com/showthread.php?t=2164185
- Change CID: http://forum.xda-developers.com/showpost.php?p=48317726&postcount=14
- Change Splash Screen: http://forum.xda-developers.com/showpost.php?p=48373936&postcount=14
AGAIN, you're doing that on your own. Your hov may differ from mine a lot!!!
Now, if you know to read and if you follow the guidelines, you SHOULD NOT have any problems. If you do, you did something wrong, sorry for that, do everything again, correctly... :angel:
And go to POmega thread and hit "thanks" to Aiko0923... :victory:
bratusm said:
I DID ALSO FOLLOWING (PLEASE, PLEASE, you're doing that on YOUR OWN):
While on POmega and HellBoy/Ironman kernel, you can (please in THAT order):
- S-OFF: http://forum.xda-developers.com/show....php?t=2558740
- Remove Red Text: http://forum.xda-developers.com/show....php?t=2164185
- Change CID: http://forum.xda-developers.com/show...26&postcount=4
- Change Splash Screen: http://forum.xda-developers.com/show...6&postcount=14
AGAIN, you're doing that on your own. Your hov may differ from mine a lot!!!
Click to expand...
Click to collapse
Those last 4 links are broken. I S-OFF'ed my HOV and I want to try to remove the red text.
disaster1080 said:
Those last 4 links are broken. I S-OFF'ed my HOV and I want to try to remove the red text.
Click to expand...
Click to collapse
I just checked... Working... Strange
Here's again for red text: http://forum.xda-developers.com/showthread.php?t=2164185
bratusm said:
I just checked... Working... Strange
Here's again for red text: http://forum.xda-developers.com/showthread.php?t=2164185
Click to expand...
Click to collapse
I guess he is talking about the donwload link for removing the red text, not the link you gave
Ringford said:
I guess he is talking about the donwload link for removing the red text, not the link you gave
Click to expand...
Click to collapse
You're right :silly: Sorry, I didn't check the link from the thread...
Here it is:
- for red text: https://app.box.com/s/8o4r6lkndpzl41v9c9gw
- s-off, Windows: https://app.box.com/s/9axh9f1jmxc3pjn8mj4f Linux: https://app.box.com/s/wllfllih0y3d8cp8bpn8 - of course, everything is also here: http://rumrunner.us/, but, just in case...
Unfortunately, hboot is stil not there for primou...
Can I use the ultimate tool to flash kernel if I'm S ON?
Cause flashing kernel on W8. 1 makes me have a headache
Thanks
Sent from my HTC One V using xda app-developers app
sonrics1993 said:
Can I use the ultimate tool to flash kernel if I'm S ON?
Cause flashing kernel on W8. 1 makes me have a headache
Thanks
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
Yes
What is the android-info.txt values for POmega?
igylan said:
What is the android-info.txt values for POmega?
Click to expand...
Click to collapse
Look here: http://forum.xda-developers.com/showpost.php?p=48381443&postcount=25
bratusm said:
Look here: http://forum.xda-developers.com/showpost.php?p=48381443&postcount=25
Click to expand...
Click to collapse
Much appreciated bro! :good:
Remove xposed framework
Can anyone guide me to remove the xposed framework is by default installed in the rom
also did anyone install spirit fm
i am not able to get the audio after installing the app
rajkiranjgupta said:
Can anyone guide me to remove the xposed framework is by default installed in the rom
also did anyone install spirit fm
i am not able to get the audio after installing the app
Click to expand...
Click to collapse
Use Xposed Disabler - It's in zip file of installer: http://forum.xda-developers.com/showpost.php?p=44013064&nocache=1&z=2542518959380686
My backup of Disabler: https://app.box.com/s/actam34crfruoafk4ffu Just flash it in recovery...
I have Spirit FM, no problems at all, working like a charm...
Thanks for this guide!

[Sammy][I9500][5.0.1] MboKarna Rom I9500 Stock Side Odexed-Deodexed

Disclamer
----Always Do With Your Own Risk---
This is just for GT-I9500 International Model Not for Other
All good in my GT-I9500 but donno in yours
Im not responsibility if this rom make any trouble with your phone, sdcard etc
BACK UP your EFS first before try with your recovery!! Or Any Tools that you know!
I dont give that tools in my rom
aLWAYS dO wITH yOUR oWN rISK
=================
Discription
THIS IS JUST PURE STOCK FLASHABLE ZIP ROM
-Last sammobile firmware I9500 see in sammy cridit
-Odexed dan Deodexed
-Zipaligned
-Rooted
-Busybook
-Deknoxed
-No Compressed
-Conservatif Dedblooted
-Multy csc and languange around the world
-Zip flashable Rom from Custom recovery
-Ready Undeblood botlawere odex and deodek, if you want back look like original full stock
-No any custom mod added
-Stock Kernel in rom
-No any modem added you can flash alone from boatloader
I will Try Update if any Deferend Code Firmware in somemobile Update
Rom
V.1
9 Agustus 2016
ODEXED ROM
MboKarna_i9500_PF1_Odx
md5:42ac400d50c0b88dfe47964235f08d15
DEODEXED ROM
Mbokarna_i9500_Deo
md5:e4859fa6ac44f4ed365d88b52e0b415a
Known Issue/Bug
---platform original stock problem with write external media look like titanium backup
Be solved
---give me know other i will try solve althoung not promise can solved all---
Exposed If Needed
Exposed
Boatloader
A. sboot.bin
Sboot.bin
To flash sboot you can see my guide in here
Guide Vidio
B. Modem
modem Odin flash
Modem Odin Flashable
note : extrak zip file.
sboot.tar.md5 insert in BL odin column
modem.tar.md5 insert in AP odin column
Modem Recovery flash (TWRP or other)
modem recovery flash
Boatlaware/Undebloat If Want Back
Odexed
Odexed boatlaware_PF1
Deodexed
Deodek Boatlawere Pf1
note : Extrat that file boatlaware.zip
Than you can flash as your target boatlawere or extrat it to pust file if you want just necessary file
In there you will see to like knox or any other stuff that i have deblot in rom before.
Installation
Must be install From Stock Lolipop/custom lolipop
A. Included Boatlader Sboot.bin
1. Download Rom Target in HP
2. Download sboot.tar.md5.zip in computer windows
Extrat that file in windows computer until you get
sboot.tar.md5
Insert that file to BL in odin collum
Than done From HP
Reboot to custom recovery (Recom TWRP)
Wipe cache, dalvic data, system
Instal zip rom
Reboot to download mode to flash sboot.bin from odin computer
Instal sboot bin in BL Codin computer
Reboot outomatically
...
You can see my tutorial how instals sboot.bin in here
video tutorial
B. Without boatloader sboot.bin
In your Hand Phone
--Download Rom target
--Download KUD Kernel from here
KudKernel
Reboot to custum recovery (Recom TWRP)
Wipe system, data, cache, dalvic
Instal mbokarna.zip rom
Instal KUD kernel.zip after that
reboot
Note :
My recomendation is use stock kernel and install boatloader first for the best result!!
If you want switch to other kernel easy be doing after that...
This is original kernal i9500 PF1 if you want back to original after try with other kernel.
Original Kernel I9500-PF1
Cridit to Sammy
i9500-PF1 as Rom Based
I will give update if any sammy deferend code update
Cridit for Developper
@dsixda for the legend kitchen
@JustArchi for Archi Kitchen
@Chainfire for Supersu
@JesusFreke for smali-backsmali
@_riddle for oat2dex tools
@SuperR. for deodek secribt linux
@osm0sis for many templete scribt
@krasCGQ for Kud Kernel if user not want flash sboot.bin
Debian jessie for os to cooks this rom.
@hansonchen as my pathner since in s3 forum
@all I9500 moderator, rom maker and user
*pm me if im forget other
zuzie--thankyou
reserved
reserved for all thing or nothing
Will apps have full access to extsdcard like saving directly to extsdcard ?
jinvidia said:
Will apps have full access to extsdcard like saving directly to extsdcard ?
Click to expand...
Click to collapse
My bad...
Im not edit system/etc/permissions/platform.xml just stock have.
Will see it if make problem to externel...i will give path to solve that...
Sent from my GT-I9500 using XDA Free mobile app
Screenshots please
Just stock have
Sent from my GT-I9500 using XDA Free mobile app
Great work for a stock based rom
https://mega.nz/#!XZ5jUATB!bgIpy47rf-CWI7sWrtMUY8yNDB8ljqZAPPVXPgLoJLY
Solve external write media in platform.xml
Im not change stock have before so that will make problem looks like titanium backup. Just flash with that to solve it.
Sent from my GT-I9500 using XDA Free mobile app
If you want I can give you examples like easy voice recorder Will only save to Android folder of extsdcard and not to the root folder. Please enable the functionality so that third party apps as well as inbuilt apps can access the root of extsdcard. Thanks
jinvidia said:
If you want I can give you examples like easy voice recorder Will only save to Android folder of extsdcard and not to the root folder. Please enable the functionality so that third party apps as well as inbuilt apps can access the root of extsdcard. Thanks
Click to expand...
Click to collapse
You want like this ? Or other means ?
Sent from my GT-I9500 using XDA Free mobile app
This is with the default app. I am talking about the folder structure in the extsdcard.
jinvidia said:
This is with the default app. I am talking about the folder structure in the extsdcard.
Click to expand...
Click to collapse
What folder structure...you give voice record for example and i have give that.
And This is titanium backup. That can akses to external to. That not defold app.
If you not belive...and you in stock rom now. Flash my path in anyrom stock lolipop that you have...than see it...
Sent from my GT-I9500 using XDA Free mobile app
Yes I mean saving directly to storage/extsdcard. Most apps will only save to android folder in extsdcard.
I'm extremely happy to see you here @zuziemanis. Thank you for making an odex stock for i9500. I've just Odin my phone back to original pf1 Russia downloaded from sammobile because i bought a new battery & can't get nfc to work on vova rom. Then i found out the nfc placement is differently placed on other model of phones, i tested with an Xperia Z Ultra.
Now I've to download yours & flash it. I find odex rom is faster in performance
hansonchen said:
I'm extremely happy to see you here @zuziemanis. Thank you for making an odex stock for i9500. I've just Odin my phone back to original pf1 Russia downloaded from sammobile because i bought a new battery & can't get nfc to work on vova rom. Then i found out the nfc placement is differently placed on other model of phones, i tested with an Xperia Z Ultra.
Now I've to download yours & flash it. I find odex rom is faster in performance
Click to expand...
Click to collapse
Hehe finally just stock have...
As you know im stock lovers
Thank you for your respect mr...
Will try other possibility after this.
Sent from my GT-I9500 using XDA Free mobile app
zuziemanis said:
Hehe finally just stock have...
As you know im stock lovers
Thank you for your respect mr...
Will try other possibility after this.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Ok sounds really good. Btw, if anyone may ask for xposed for odex rom, this one by dkcldark works:
Installer v85.0 : https://www.dropbox.com/s/tbjlemu0w3j6nb4/xposed-v85.0-samsung-5.0.x-sdk21-test-by-dkcldark.zip?dl=0 (md5: d3769d44cec2adffd73ce0444a5f3bbf)
UNINSTALLER v83.0 : https://www.dropbox.com/s/l4bijfx55...-5.0.x-sdk21-uninstaller-by-dkcldark.zip?dl=0 (md5: 544636ff7a42766ac3db4d84f8b10986)
Changelog & comment by him:
Spoiler
This works with stock odexed / deodexed Samsung 5.0.x SDK21 Touchwiz firmwares. Debloating is not needed but there is a little possibility that it doesn't work on some devices. Have to use the bundled uninstaller when you want to revert it.
IMPORTANT: It is only a test version which means it's not stable. Don't try this unless you enjoy beta testing.
I appreciate all the feedbacks. Thank you guys!
[Change log]
v80.0:
1. Based on arter97's v79 test (http://forum.xda-developers.com/showpost.php?p=64900847&postcount=3681)
2. Made it work with stock odex firmware without debloating /system
3. Merged official xposed v80 changes (http://forum.xda-developers.com/showpost.php?p=65113226&postcount=28)
4. Added MatrixDJ96's fix regarding Flashfire support. (http://forum.xda-developers.com/showpost.php?p=65230465&postcount=3900)
v80.1
1. Fixed an issue where KakaoTalk crashed.
v83.0
1. Updated to v83 (http://forum.xda-developers.com/showpost.php?p=66512549&postcount=31).
2. Modified the installd binary not to exclude dexopt process on '*.odex' files. As a result, the installer script v83.0 doesn't append '.xposed' on odex files any more (Have a look at the flash-script.sh). This is kind of an experiment and probably needs more testing.
v85.0
1. Updated to v85 (http://forum.xda-developers.com/showpost.php?p=67062979&postcount=34)
Users coming from v80.1 or below MUST uninstall it using THIS_UNINSTALLER_v80.0 https://www.dropbox.com/s/cst4vy137...-5.0-uninstaller-by-dkcldark.zip?dl=0 first!!
He may have updated to newer version, anyone interested can follow this thread:
http://forum.xda-developers.com/showpost.php?p=65373013&postcount=3960
Edit: he updated to v85, just visit the link above for the new updated xposed
hansonchen said:
Ok sounds really good. Btw, if anyone may ask for xposed for odex rom, this one by dkcldark works:
Installer v83.0 : https://www.dropbox.com/s/2yam8krwgi5rznr/xposed-v83.0-samsung-5.0.x-sdk21-test-by-dkcldark.zip?dl=0 (md5: a26db26c69acba856eb01e8d29642650)
UNINSTALLER v83.0 : https://www.dropbox.com/s/l4bijfx55...-5.0.x-sdk21-uninstaller-by-dkcldark.zip?dl=0 (md5: 544636ff7a42766ac3db4d84f8b10986)
Changelog & comment by him:
Spoiler
This works with stock odexed / deodexed Samsung 5.0.x SDK21 Touchwiz firmwares. Debloating is not needed but there is a little possibility that it doesn't work on some devices. Have to use the bundled uninstaller when you want to revert it.
IMPORTANT: It is only a test version which means it's not stable. Don't try this unless you enjoy beta testing.
I appreciate all the feedbacks. Thank you guys!
[Change log]
v80.0:
1. Based on arter97's v79 test (http://forum.xda-developers.com/showpost.php?p=64900847&postcount=3681)
2. Made it work with stock odex firmware without debloating /system
3. Merged official xposed v80 changes (http://forum.xda-developers.com/showpost.php?p=65113226&postcount=28)
4. Added MatrixDJ96's fix regarding Flashfire support. (http://forum.xda-developers.com/showpost.php?p=65230465&postcount=3900)
v80.1
1. Fixed an issue where KakaoTalk crashed.
v83.0
1. Updated to v83 (http://forum.xda-developers.com/showpost.php?p=66512549&postcount=31).
2. Modified the installd binary not to exclude dexopt process on '*.odex' files. As a result, the installer script v83.0 doesn't append '.xposed' on odex files any more (Have a look at the flash-script.sh). This is kind of an experiment and probably needs more testing.
Users coming from v80.1 or below MUST uninstall it using THIS_UNINSTALLER_v80.0 first!!
He may have updated to newer version, anyone interested can follow this thread:
http://forum.xda-developers.com/showpost.php?p=65373013&postcount=3960
Click to expand...
Click to collapse
Thankyou...
edit pos one
Give link to here to exposed.
Sent from my GT-I9305 using XDA Free mobile app
zuziemanis said:
What folder structure...you give voice record for example and i have give that.
And This is titanium backup. That can akses to external to. That not defold app.
If you not belive...and you in stock rom now. Flash my path in anyrom stock lolipop that you have...than see it...
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
This is what he meant (photo). As far as i know this started on kitkat, some apps doesn't allow or don't have the option to choose custom extsd folder/location. So it's not rom related
hansonchen said:
This is what he meant (photo). As far as i know this started on kitkat, some apps doesn't allow or don't have the option to choose custom extsd folder/location. So it's not rom related
Click to expand...
Click to collapse
Ok..only stock way in here...
Look like that depending from each aplication have. Or any other ristriction from os.
Never think abaout it before. Will try see it if i have free time to understand more about it first.
Sent from my GT-I9300 using XDA Free mobile app

|UPK| - Upgrade Kit Samsung Galaxy S ( GT-I9000 )

|UPK| - Upgrade Kit Samsung Galaxy S ( GT-I9000 ) ​
To root the phone use the command line tutorial in Firmware Package folder The UPK contains:
-Driver for Samsung Galaxy S (GT-I9000)
-Heidmall-Frontend
-All modified files for root flash (zImage – ROOT+CWM and more files for root with CWM)
-CWM – ClockWorkMod recovery flashed directly into zImage (to add that use the read me tutorial at section cmd flash or command line flash
DOWNLOAD:
https://drive.google.com/file/d/0B6_txh7wLxtAOGlFTFUzMGtRd2c/view
OR
https://thepiratebay.org/torrent/18011017/_UPK__-_Upgrade_Kit_Samsung_Galaxy_S_(_GT-I9000_)___
From Synapse. to XDA-Forum USERS. :good::angel:[/COLOR]
??
What ?
Sent from my LG-P970 using XDA Free mobile app
Synapse. said:
What ?
Sent from my LG-P970 using XDA Free mobile app
Click to expand...
Click to collapse
Maybe what he is trying to say is we don't know what your "upgrade kit" is for.
Can you add a small description and install instructions? (I know there is already instructions in the Firmware Package folder)
Also, can you write your post in bigger font size, I cannot read? :silly: (just kidding, reducing the font size should help too, use titles)
alex-pex said:
Maybe what he is trying to say is we don't know what your "upgrade kit" is for.
Can you add a small description and install instructions? (I know there is already instructions in the Firmware Package folder)
Also, can you write your post in bigger font size, I cannot read? :silly: (just kidding, reducing the font size should help too, use titles)
Click to expand...
Click to collapse
I am so sorry but I already closed that gt-i9000 upk kit project . If you want more help about installing or other things I can help you with everything.
Nah, you're nice but I flashed a custom rom last night. It was a long time I didn't do that and it was hard to find the tools / roms / cf-root, but I did it.
alex-pex said:
Nah, you're nice but I flashed a custom rom last night. It was a long time I didn't do that and it was hard to find the tools / roms / cf-root, but I did it.
Click to expand...
Click to collapse
I am glad to hear that and if you can tell me what should I do next time when I will make an UPK.

Categories

Resources