[Q] Xperia Arc won't boot after CWM crash - Xperia Arc Q&A, Help & Troubleshooting

I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?

Been doing flashtool ftf recoveries whenever this occured. Do not power on arc s with it stuck. let flashtool self boot to flash mode and you will be back in buisness again.
Sent from my GT-P6800 using xda app-developers app

if you could tell me what to do a bit more precise I'd really love you! like a small guide

I assumed you have flashtool since you mention about kernel downgrade. if no get it installed
the step actually same as flashing the kernel with phone power off.
reference link to a online guide
http://www.thespicygadgematics.com/2012/06/how-to-fix-bricked-sony-xperia-android.html
Sent from my GT-P6800 using xda app-developers app

Sparfen said:
if you could tell me what to do a bit more precise I'd really love you! like a small guide
Click to expand...
Click to collapse
1. Flash ready to rood ics 562 with flashtool. Here's a youtube tutorial.
2. Root your phone
3. get cwm and follow these steps to install custom rom with locked bootloader
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install custom rom from sd card without rebooting
works every time for me

TRY THIS!
Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
ok first since ur stuck flash back to stock using flash tools n then follow the procedure.. i had a similar problem n i fixed it.. it was a very simple prob.. for installing these custom roms u ve to format system/ , so if ur using the cwm app by pvyparts ul loose the cwm after wiping it.. all u ve to do is after flashing the custom rom ul ve to install CWM back (use cwm version 5 available in the thread by pvyparts.. not the latest one..)
here's the thread for CWM
n post back if it works..

Thanks guys, really appreciate it, will try these methods out.

Still won't work
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.

Sparfen said:
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.
Click to expand...
Click to collapse
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)

jader13254 said:
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)
Click to expand...
Click to collapse
Yeah, that I know and that's what I'm doing. When I hold down the back key and connect to the pc all that happens is that the green led lights up. Flashtool won't recognise it and it still says that I should hold down the back key and then connect to the PC...

http://forum.xda-developers.com/showthread.php?t=1126358

XperienceD said:
http://forum.xda-developers.com/showthread.php?t=1126358
Click to expand...
Click to collapse
Thanks but flashtool won't recognise it and i have a locked bootloader.

Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
This happened to me once, if i remember right, i've used the repair phone option in sus ( since my phone cannot be recognized i did the click your phone option) it did not repair my phone since sus said i have the latest version installed BUT then i pulled out my battery, reinsert it; open flashtoool, clicked flashmode and entered it successfully

Sparfen said:
Thanks but flashtool won't recognise it and i have a locked bootloader.
Click to expand...
Click to collapse
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S

THANK YOU!
jman2131 said:
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S
Click to expand...
Click to collapse
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!

Which rom u flashed??
Sparfen said:
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!
Click to expand...
Click to collapse
I was also stuck at Sony logo and it reboots every time just after sony logo. Then i used flashtool, flashed using "LT15i_4.1.B.0.587_Kernel.ftf".....
Now it boot further, but only to XPERIA logo, and then reboots....but certain times i have seen it getting past the logo, like it shows a display asking for pc companion, even the taskbar too with time and blutooth icon on it....but all of a sudden it reboots. i have tried rebooting more than a 100 times, while taking out battery everytime.
Also, I'm not able to get into recovery mode. I tried this using the combination of power on, and when sony logo appears, pressing and releasing volume down repeatedly. I hope i'm doing right.
So what should I do?? am not able to use this phone for a week...
Please help me out.
Ok got it working. I just unlocked the boot loader from sony bootloader site(sorry couldn't post the link, because of low post count)
So, it booted up but show error as soon as put a sim, that "Unfortunately keypad has stopped working".
I figured out the culprit, it is the build version with i flash it. I reflashed it with LT15i_4.1.B.0.431_kernel.ftf, now it working fine like a charm.
So much relief...!!
Hope this may help someone too...so i shared!!!

Related

[Q] Phone doesnt start

Hello,
I'm using Arconium rom when i tryed to install the CM9 to test, well i just flashed with fastboot the new img from FX and install the rom. The instalation started but returned an error that i don't remember something about lt8i (my phone is lt5i).
I go to flashtool and tryed to get back to stock rom, but without sucess, now my phone show the Sony Ericsson logo and later it stay black.
Thinking i can fix this i relock the bootloader with flashtool files (found on Xperia Arc forum) and still not fix. Now i cannot unlock the bootloader "oem failed" and the phone doesnt start.
Please someone can help-me with a tutorial or something else ?
Take battery out, connect it to pc, press the back button and now plug in the battery again and see if it connects in flashmode then.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Take battery out, connect it to pc, press the back button and now plug in the battery again and see if it connects in flashmode then.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
Yes, the phone conect on flashtool and fastboot normally, but only show the SE logo.
Update[/B
I tryed to flash a fresh rom with flashtool .42 but no success.
Fix finally
Hey, i finally fix the problem, i downloaded the stock .62 and flashed with flashtool and works.
HELP
THIS MAY HELP U
http://forum.xda-developers.com/showthread.php?t=1322827

Stuck at Sony logo

So, I was using .431 generic global world (GGW) build for my xperia arc till today.
Today, I noticed that .587 GGW came out and decided to update.
I already had unlocked bootlader with no root with .431.
First, I backup everything & factory-wiped my phone.
I tried to enter flash mode with no avail for over 10+ tries.
Then I decided to trick SPC update to force my phone into flash mode.
It put the phone to flash mode as I thought.
I successfully flashed .587.
Then I started to root.
I used the guide at this post:
http://forum.xda-developers.com/showpost.php?p=26805903&postcount=3
After the 2nd step I noticed that I can't enter the flash mode even with SPC trick.
I deleted all previous usb drivers and settings.
I also reinstalled all sony software and drivers from scratch.
I was still unable to enter flash mode.
Then, I noticed I could enter fastmode.
So, I renamed the ftf file to zip and extracted the files.
Then, I used fastboot mode to flash new kernel.
Phone was rooted and working.
I installed CWM and got a full backup.
So, I thought why not try a custom mod after the root.
I decided to try Hybrid MooDeD JB-ICS 100.0.
http://forum.xda-developers.com/showthread.php?t=1526717
I followed all the instructions to the letter and made the install.
The phone asked for reboot and when it rebooted it got stuck at Sony logo.
I checked the thread a little bit more (my fault for not checking all before but in my defence it's 101 pages..) and it seems it's kernel is based for .431 and I was using .587.
So now, I can't enter the flash mode nor fastmode and the phone is stuck at sony logo.
Help please...
can you enter recovery if yes then flash appropriate rom
and also try to remove battery for 30 or more sec and connent phone while holding back button to get in flashmode or search to get in fastboot
Have you tried flashtool to flash it to 4.1.B.0.587 ?
Have you tried flashtool to flash it to 4.1.B.0.587 ?
y2023958 said:
Have you tried flashtool to flash it to 4.1.B.0.587 ?
Click to expand...
Click to collapse
creative_md said:
can you enter recovery if yes then flash appropriate rom
and also try to remove battery for 30 or more sec and connent phone while holding back button to get in flashmode or search to get in fastboot
Click to expand...
Click to collapse
You didn't read the first post completely, did you?
alpatalik said:
So now, I can't enter the flash mode nor fastmode and the phone is stuck at sony logo.
Help please...
Click to expand...
Click to collapse
OP: How come you can't access flashmode or fastboot mode? Then you are doing something wrong. Besides, problem is that you didn't install proper custom kernel for the ROM.
And previous ROM has nothing to do with it, doesn't matter which ROM you had earlier, new one will install and delete/replace all the files.
Sent from my Xperia Arc S using xda premium
Someguyfromhell said:
OP: How come you can't access flashmode or fastboot mode? Then you are doing something wrong. Besides, problem is that you didn't install proper custom kernel for the ROM.
And previous ROM has nothing to do with it, doesn't matter which ROM you had earlier, new one will install and delete/replace all the files.
Click to expand...
Click to collapse
I realise that. I put all the info up to OP so that ppl won't waste time by asking me what happened exactly.
Nevertheless, I really can't access flash/fastmode at all. I tried removing the battery and start clicking all the things before putting the battery back on. But nothing happens. I just see the sony logo.
Someguyfromhell said:
You didn't read the first post completely, did you?
Click to expand...
Click to collapse
Yes I did read all post but for your kind information if you can boot upto se logo most probably you can get in recovery.... And he cannot go in fast boot so taking off battery is too helpful someTimes
And think before you post
Sent from my R800i using xda premium
If nothing is working for you then relock bl and use seus to reflash stock firmware. ..
Sent from my R800i using xda premium
creative_md said:
If nothing is working for you then relock bl and use seus to reflash stock firmware. ..
Sent from my R800i using xda premium
Click to expand...
Click to collapse
How, if he's phone won't go in flashmode, which is required to lock BL and for SEUS?
hmmmm
alpatalik said:
I realise that. I put all the info up to OP so that ppl won't waste time by asking me what happened exactly.
Nevertheless, I really can't access flash/fastmode at all. I tried removing the battery and start clicking all the things before putting the battery back on. But nothing happens. I just see the sony logo.
Click to expand...
Click to collapse
So as soon as you place your battery back in does your phone turn on ?
if it doesnt i think you should be able to access either flashmode or fastboot mode
Kzpl0x125 said:
So as soon as you place your battery back in does your phone turn on ?
if it doesnt i think you should be able to access either flashmode or fastboot mode
Click to expand...
Click to collapse
When I put the battery back, nothing happens. Phone doesn't get powered up. As soon as I try the key-combo for flash/fastmode, phone starts up as if it's going to enter the modes but only sony logo shows up and gets stuck. I really have no idea how this could happen.
Damn !
hmm thats odd isnt it ? Are you sure your holding the specified buttons before pressing the power on button ? Sorry about all the Questions just making sure
Install stock rom with flash tool and u will be ok browse the forum for a tutorial
gogobaba said:
Install stock rom with flash tool and u will be ok browse the forum for a tutorial
Click to expand...
Click to collapse
He Says he cant enter flashmode :S
Someguyfromhell said:
How, if he's phone won't go in flashmode, which is required to lock BL and for SEUS?
Click to expand...
Click to collapse
Yeah sorry for that...
Sent from my R800i using xda premium
---------- Post added at 05:52 PM ---------- Previous post was at 05:15 PM ----------
alpatalik said:
When I put the battery back, nothing happens. Phone doesn't get powered up. As soon as I try the key-combo for flash/fastmode, phone starts up as if it's going to enter the modes but only sony logo shows up and gets stuck. I really have no idea how this could happen.
Click to expand...
Click to collapse
if you can boot upto se logo so your semcboot is not broken
so now tell me if you could enter fastboot before you unlocked bl?
and try to unlock it again using test point method (there is also a free one with S1TOOL if you had bl unlock allowed = yes if you could recall) i recommend not to use paid one bcoz you can pay that to sony to recover it and may be after that you could get into fastboot mod
if it didn't helped try to repair semcboot or trim area contact alejandrissimo for that it also follows testpoint method and its free
i think now only way to connect phone to pc is using testpoint!!!!!
Kzpl0x125 said:
hmm thats odd isnt it ? Are you sure your holding the specified buttons before pressing the power on button ? Sorry about all the Questions just making sure
Click to expand...
Click to collapse
yes. I was. I even tried all possible button combinations for xperia.
nevertheless, I had left my phone at a local repair place. It seems they fixed the phone but downgraded to GB.
thanks to all who have replied.

Bricked ION.... need help

So, i have update my ion to ICS LT28h, my wife's ion we waited for the official AT&T update. I downloaded PC Companion, connected the phone, started the update process. I did all i was told on every screen. the phone never updated and now does not power on. no lights when plugged in to charge or connect.
help?
Wrong Section
wrong section
1) hold the power + volume down for like 15 secs...(untill you feel a vibrate)
2) download flashtool at http://androxyde.github.com/
-----Install
3) download whatever FTF you want at http://forum.xda-developers.com/showthread.php?t=1752345
----move it to C:\Flashtool\firmwares
make sure drivers are installed(find them in C:\Flashtool\drivers
4) Launch Flashtool
5)select the thunderbold
----select the ftf
6)insert the micro usb end into phone (leaving the regular usb out of computer)
----it will tell you some instructions on how to flash but they are for different xperia phone
7) while holding the volume down button while the phone is off (From step 1)
insert REGULAR usb into computer
it should say flashing, or your comp might say installing driver, or it might just say drivers not installed..
ONLY IF YOU CHOOSE TO INSTALL LT28H FTF--------------repeat this step but now install the file from (FOR LTE)
-----------------http://forum.xda-developers.com/showthread.php?t=1815636&highlight=lte
--------------------(just scroll down) (was too lazy to give dl link) XD
8) if it works, thank me XD
trf000 said:
So, i have update my ion to ICS LT28h, my wife's ion we waited for the official AT&T update. I downloaded PC Companion, connected the phone, started the update process. I did all i was told on every screen. the phone never updated and now does not power on. no lights when plugged in to charge or connect.
help?
Click to expand...
Click to collapse
If it is an AT&T phone do you really want to update to LT28h?
why not install lt28h
all you have to do is just flash the extra ftf
and then just change the APN
which i as well as spectre have posted
http://forum.xda-developers.com/showthread.php?t=1770813
The att version works fine has root and cwm
Sent from my LT28at using xda premium
424aca said:
why not install lt28h
all you have to do is just flash the extra ftf
and then just change the APN
which i as well as spectre have posted
http://forum.xda-developers.com/showthread.php?t=1770813
Click to expand...
Click to collapse
No reason to use the LT28h anymore since the LT28i and LT28at both have ICS and root.
In hope that someone's still looking at this thread, here is my situation: I tried flashing a prerooted image via fastboot and landed in a Sony bootloop. Then somehow I was stuck in fastboot-mode (led: static blue) and let the phone drain its battery. Now I'm able to get into flashmode but when flashing the chinese FTF with the Flashtool it stops at 1% with status "Processing .......sin" (sorry don't know the file exactly).
When I'm trying to power it up now the Sony logo comes up followed by an exclamation mark in a triangle... could you tell me what options there are left? I saw these prerooted images (http://forum.xda-developers.com/showthread.php?t=1669906), but there is none for the Ion, so I don't know what could be the next step. If I just had back my normal system... I used to flash my Galaxy S many times so I'm not that unexperienced, but it seems I really have a problem here:crying:
Any help is appreciated!
Ruler85 said:
In hope that someone's still looking at this thread, here is my situation: I tried flashing a prerooted image via fastboot and landed in a Sony bootloop. Then somehow I was stuck in fastboot-mode (led: static blue) and let the phone drain its battery. Now I'm able to get into flashmode but when flashing the chinese FTF with the Flashtool it stops at 1% with status "Processing .......sin" (sorry don't know the file exactly).
When I'm trying to power it up now the Sony logo comes up followed by an exclamation mark in a triangle... could you tell me what options there are left? I saw these prerooted images (http://forum.xda-developers.com/showthread.php?t=1669906), but there is none for the Ion, so I don't know what could be the next step. If I just had back my normal system... I used to flash my Galaxy S many times so I'm not that unexperienced, but it seems I really have a problem here:crying:
Any help is appreciated!
Click to expand...
Click to collapse
What model are you working with? And where did you get this prerooted image (the one you tried to flash)? From the link you posted I don't see one for the ion. Anyway, based on my own soft brick experience, you'll prolly need to let the phone battery drain, then charge (process can take a day or so), then try and flash your stock FTF via Flashtool.
Ruler85 said:
In hope that someone's still looking at this thread, here is my situation: I tried flashing a prerooted image via fastboot and landed in a Sony bootloop. Then somehow I was stuck in fastboot-mode (led: static blue) and let the phone drain its battery. Now I'm able to get into flashmode but when flashing the chinese FTF with the Flashtool it stops at 1% with status "Processing .......sin" (sorry don't know the file exactly).
When I'm trying to power it up now the Sony logo comes up followed by an exclamation mark in a triangle... could you tell me what options there are left? I saw these prerooted images (http://forum.xda-developers.com/showthread.php?t=1669906), but there is none for the Ion, so I don't know what could be the next step. If I just had back my normal system... I used to flash my Galaxy S many times so I'm not that unexperienced, but it seems I really have a problem here:crying:
Any help is appreciated!
Click to expand...
Click to collapse
Try using SUS to do a repair of the phone.
Ruler85 said:
In hope that someone's still looking at this thread.
Any help is appreciated!
Click to expand...
Click to collapse
I have had the 1% happen to me. I just unplug phone close and reopen flashtool and try again. Took me 3 times to get to flash once.
If still no luck, like spectre51 said use repair option in pc companion.
If all else fails use this thread
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my LT28i using xda app-developers app
ToledoJab said:
I have had the 1% happen to me. I just unplug phone close and reopen flashtool and try again. Took me 3 times to get to flash once.
If still no luck, like spectre51 said use repair option in pc companion.
If all else fails use this thread
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my LT28i using xda app-developers app
Click to expand...
Click to collapse
Thx for your hints! It is kinda frustrating to wait until it is fully loaded, then try flashing, then load and wait again... but the 1%-bug seemed to be a major bug as it is fixed now in the new version 0.9.8 of the flashtool.IGonna tray again tomorrow and report my status. I already checked popfan's thread to get a point if mydevice really is bricked or not. So again thanks to all of you!
Just out of curiosity: is there a possibility to flash a prerooted ftf-file? I live in Switzerland where I bought the lt28h version. And I haven't found a prerooted. img file for flashing via fastboot. Just want to root it, custom roms etc. later
Alright, I was able to flash the chinese FTF and got my phone back working:laugh:
But I had to install the newest version 0.9.8 of the flashtool to not get the 1%-bug again. After this roooting via bin4ry's script worked well and now I'm happy happy happy. Thank you all!
I also had problems with flashtool 9.7. I used 9.0 with no problems. Didn't know about 9.8.
Sent from my LT28at using XDA
as the OP of this thread, thought i'd update. After reading a few threads i discovered the power/volume button trick. tried volume down with no luck, but power and volume up worked. PC Companion did not work in upgrading the phone. just kept telling me to disconnect my battery, and that if the batter cannot be disconnected to skip that step. But it wouldn't go to the next step. So I tried SUS. Worked perfectly.
So, My phone is running lt28h and my wife is on lt28at. There are some differences in the way data is downloaded. looking at my AT&T bill, the data downloads, i assume for apps that get updated, seem to be different sources. also my phone has significantly larger downloads even though we have similar apps. I do have a couple of weather apps she doesn't have that might be responsible for that.
I'd like to do some additional comparisons, but think i'll be flashing the AT&T rom on my phone soon.

[Q] Bricked Xperia S??

Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps
iamdumps said:
Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps
Click to expand...
Click to collapse
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app
HooLIMAN87 said:
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Ofcourse
patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.
iamdumps said:
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.
Click to expand...
Click to collapse
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)
patato800 said:
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)
Click to expand...
Click to collapse
Yes I can connect to flashtool in flash mode. Sorry I'm a bit lost on where to go from here. All help greatly appreciated at this point.
If you can find a way to copy a ROM file into the fone we can flash it. The fone isnt being recognized by the PC , but the CWM works and it cannot mount as a USB Storage as some lunfile is missing . I am also on the same page and struggling for hours
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
It worked , Finally , thank you so much .
patato - thanks mate, will get on it and cry if I have any more questions. :laugh:
sarandeep - good work!!
patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!
iamdumps said:
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!
Click to expand...
Click to collapse
Search youtube on how to unlock the bootloader and install CM10 there is one very good video but i can't give the link now as I'm on my phone
Glad I helped you ;D
Sent from my Jellybean Xperia S!
A tip for the newbies out here:
Read everything carefully. Chances of bricking a Sony device is quite low because of Sony's dev support but you will have moments of anxiety and lots of torn hairs. As a way to start, please go through all the top stickied posts in the Dev section and understand what are the many processes happening. It doesn't take more than a couple of hours to go through them but in the long run, helps you to enjoy your device better. Hope you will have a good time with the S

HELP Needed - Sony Xperia M Dual on BootLoop after Bootloaded Unlocked

hi guys, need some help here. I'll try to keep this short and precise to describe how i ended up in the problem
i did not have (and do not have) any custom recovery installed before this day, never needed to go in recovery mode.
1. Root using TowelRoot app (no problem so far)
2. Installed SuperSu app (no problem so far)
3. Unlocked bootloader using Fastboot and followed official sony guides
---after unlocking the bootloader, phone went in bootloop. It can go in Fastboot mode. It can go in FlashTool Mode, but when I tried flashing FTF file, it ended up in boot again. instead of Sony logo + colourful animation. now it's stuck at sony logo only.
I tried using Sony PCC, to repair it but it says there's any error, can't proceed - it's a dead end.
Do you think it's cause I actioned in incorrect order i.e. should have unlocked bootloader first before rooting?
Thanks for all the help/advices/direct links.
leavitnow said:
hi guys, need some help here. I'll try to keep this short and precise to describe how i ended up in the problem
i did not have (and do not have) any custom recovery installed before this day, never needed to go in recovery mode.
1. Root using TowelRoot app (no problem so far)
2. Installed SuperSu app (no problem so far)
3. Unlocked bootloader using Fastboot and followed official sony guides
---after unlocking the bootloader, phone went in bootloop. It can go in Fastboot mode. It can go in FlashTool Mode, but when I tried flashing FTF file, it ended up in boot again. instead of Sony logo + colourful animation. now it's stuck at sony logo only.
I tried using Sony PCC, to repair it but it says there's any error, can't proceed - it's a dead end.
Do you think it's cause I actioned in incorrect order i.e. should have unlocked bootloader first before rooting?
Thanks for all the help/advices/direct links.
Click to expand...
Click to collapse
Flash ftf file with flashtool. Just wait It must boot. First boot take more than 10 min
Thanks mate, i shall wait for it then. After the flashin waa completed, The flashtool asks to click on back button, i dont have it, any suggestion?
Thanks in advance
Sent from my Mi 4i using XDA Free mobile app
leavitnow said:
Thanks mate, i shall wait for it then. After the flashin waa completed, The flashtool asks to click on back button, i dont have it, any suggestion?
Thanks in advance
Sent from my Mi 4i using XDA Free mobile app
Click to expand...
Click to collapse
turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
Flashing Guide - http://forum.xda-developers.com/show....php?t=2697277
Don't forget to hit the thanks button
Sureshtuty said:
turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
Flashing Guide - http://forum.xda-developers.com/show....php?t=2697277
Don't forget to hit the thanks button
Click to expand...
Click to collapse
Sorry, I was away for few days, finally your trick help, it did take 20 minutes after ftf update. Thanks everyone else who helped here.
help me please
i have xperia m, after unlocking bootloader it stuck on bootlooping, i have not enable usb debugging...any way to fix it?
catmob said:
i have xperia m, after unlocking bootloader it stuck on bootlooping, i have not enable usb debugging...any way to fix it?
Click to expand...
Click to collapse
Flash stock rom(FTF File) with flashtool. No need to enable usb debugging. Just try it will work.
Flashing Guide - http://forum.xda-developers.com/showthread.php?t=2697277
Sureshtuty said:
Flash stock rom(FTF File) with flashtool. No need to enable usb debugging. Just try it will work.
Flashing Guide - http://forum.xda-developers.com/showthread.php?t=2697277
Click to expand...
Click to collapse
many many thanks sir....my problem is solved
catmob said:
many many thanks sir....my problem is solved
Click to expand...
Click to collapse
Don't say thanks Hit the Thanks Button

Categories

Resources