Develop Bugs

[KERNEL] HO!NO! Palace...

To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel V4
Mirror
HO!NO! GitHub

Sweet thank you ! Cant wait for a CM9 hehe
Sent from my LG-P930 using XDA

Thanks for all ur work!
Sent from my LG-P930 using xda premium

Advice
HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel to come when CM9 will be in RC stage....
Click to expand...
Click to collapse
Sir ,maybe you can improve your kernal for deep searching the cm9 kernal,hoping that would be a good resource for your ref.Meanwhile expecting your new ver Of your home-made kernal. keep up your job！

HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel to come when CM9 will be in RC stage....
Click to expand...
Click to collapse
Can u change the charging animation of LU6200 when it's power off. The original one is really ugly. Thank you very much.

great job! Thanks very much.

THX 4 UR HARD WORK 4 OUR LU su!
啤酒是必须的~

Can't wait for CM9 kernal! Anyone see an improvement in battery life with the current kernals?

Thank you for all your work in main this phone one of the best out there

HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
Click to expand...
Click to collapse
restored my phone to original att nitro hd rom, then flashed the corresponding kernel, wiped dalvik cache and rebooted.. now i dont have root access? any way to resolve this issue besides rerooting it.. the kernel shouldnt affect it right?

kumayam said:
restored my phone to original att nitro hd rom, then flashed the corresponding kernel, wiped dalvik cache and rebooted.. now i dont have root access? any way to resolve this issue besides rerooting it.. the kernel shouldnt affect it right?
Click to expand...
Click to collapse
Your original nitro rom is maybe not rooted...
And no kernel does not change one thing about root.

HO!NO! said:
Your original nitro rom is maybe not rooted...
And no kernel does not change one thing about root.
Click to expand...
Click to collapse
i rooted the stock att nitro rom with super on click, then i made a backup and thats what ive been using, everytime i flash the corresponding kernel, it says i have no root access
Edit: I just rerooted it using super one click and everything works fine now, thanks for everything

rsalan said:
Can't wait for CM9 kernal! Anyone see an improvement in battery life with the current kernals?
Click to expand...
Click to collapse
Wasn't much better than on Bell Stock ROM the first days... but now after some days with tweaking and battery calibration the best battery life i have had so far!

Cromson said:
Wasn't much better than on Bell Stock ROM the first days... but now after some days with tweaking and battery calibration the best battery life i have had so far!
Click to expand...
Click to collapse
What sort of tweaks?

rsalan said:
What sort of tweaks?
Click to expand...
Click to collapse
heres some tweaks
http://androidforums.com/triumph-al...-performance-tweaks-updated-04-03-2012-a.html
http://forum.xda-developers.com/showthread.php?t=1560588
http://forum.xda-developers.com/showthread.php?t=1227269
http://forum.xda-developers.com/showthread.php?t=1289554

init.d support
Any chance of adding init.d support? I have a set of sick tweaks that really promotes battery life and performance.
However, I can only install part of it (manually).

thomas.raines said:
Any chance of adding init.d support? I have a set of sick tweaks that really promotes battery life and performance.
However, I can only install part of it (manually).
Click to expand...
Click to collapse
init.d support is already in my rom, this is why i don't see important to make it native in the first version.
In next release it will be native.

Thank you very much

HO!NO! said:
init.d support is already in my rom, this is why i don't see important to make it native in the first version.
In next release it will be native.
Click to expand...
Click to collapse
Which ROM? I installed Kernelpan1c Nitro HD ROM and my wife is liking it very much (it's her phone). But she wants me to hook it up with my init.d scripts as she knows how much battery life and performance is improved. However, when I tried to add the init.d forlder manually, the phone soft bricked. I guess I should post this in the ROMs thread, but I am using this kernel, and as far as I knew, in order for init.d scripts to work, your kernel has to be compatable.

I love this kernel but I love to use cm9.
I know the developer here wants to wait cm9 to rc stage in order to make the kernel for cm9, I would like to ask if you can change your mind cos cm9 original kernel is so lagging. Pls help!
Sent from my LG-P930 using xda premium

(KERNEL) Team Pecan Kernel V2 For LG Optimus Me P350

TEAM PECAN V2 KERNEL FOR LG OPTIMUS ME P350
HEY USERS BROUGHT TO YOU LATEST LG KERNEL V10i V2 THIS IS COMPILED FROM SOURCE. THIS IS FIRST FROYO MODDED KERNEL FULLY HACKED THIS IS V2 AS I ALREADY GIVEN THE FEATURES SAME THINGS IT HAVE BUT ONE MORE FEATURES ADDED IS MODDED SO IT TOOKED MORE IT IS BEST KERNEL FOR LG PECAN. GUYS YOU WILL SURELY ENJOY THIS KERNEL ALL THE FEATURES OF V2 AS LISTED ALREADY
FEATURES OF V2 :
MODDED KERNEL FULLY HACKED KERNEL SOURCE
KERNEL SOURCE : 2.6.32.9 FULLY MODDED (HACKED) ( THANKS TO RON)
LG V1Oi SOURCE CODE
FASTEST KERNEL EVER FOR FROYO OR CM6
WIFI FULLY STABLE
LATEST MODUELES
OVERCLOCKABLE AT 844 (THANKS TO RON)
NEW GOVERNOR SMARTASSV2 ( THANKS TO RON)
BUGS :
NO BUGS AT ALL
Link to Source Code of Kernel : http://github.com/teampecan
LINK FOR TEAM PECAN V2 KERNEL : http://www.mediafire.com/?r95w2z6lwi6by80
GUYS THIS IS SUPERB KERNEL FULLY STABLE BETTER THAN DRAP KERNEL SPECIAL THANKS TO RON GOKHLE. TRY IT ONCE BEST FOR FROYO LOVERS
Guys If You Think I helped You Plz press Thanks Button On my XDA​

this is froyo kernel but good to post with addition of performance from v10i can u give me a link for v10i.kdz ? thanks in advance

#venkat v10i.kdz is not released lg just released it's sources i compiled it
#venkat v10i.kdz is not released lg just released it's sources i compiled it from sources of v10i bro can u help me in adding new governors and overclocking any kernel as im new to this stuff

kdmaru said:
#venkat v10i.kdz is not released lg just released it's sources i compiled it from sources of v10i bro can u help me in adding new governors and overclocking any kernel as im new to this stuff
Click to expand...
Click to collapse
hmmm i know how to compile the kernel and i am too getting learn of adding governors and i will surely help u on that work almost i learned it overclocking is easy

So venkat bro can u teach me overclocking my v10i kernel
Sent from my LG-P350 using XDA

wow no one need this kernel? no comment,no thanks ( that 1 thanks is my) well i wasted my time to add 844mhz and new gov on kernel

Rite Bro Now Im much Disappoint

Guys nO rEPLY nOTHING VEERY MUCH DISAPPOINTEED :'(

gUYS PLZ POST UR REVIEWS !

Does it work for cm7?
Sent from my XPERIA X8 using Tapatalk 2

It works With CM7 but Wifi Will not Work !!

rom2maru said:
It works With CM7 but Wifi Will not Work !!
Click to expand...
Click to collapse
I send grats from Poland
i used this kernel, its really nice ...
governor smartassv2 works for me fine
for now i thank U for the good work
peace
PS . wifi works fine for me, like others stuff

bernardblack76 said:
I send grats from Poland
i used this kernel, its really nice ...
governor smartassv2 works for me fine
for now i thank U for the good work
peace
Click to expand...
Click to collapse
you used on cm7?

ron gokhle said:
you used on cm7?
Click to expand...
Click to collapse
no, im used this at froyo 2.2.2 v10a ... once i have a CM, some old version, i dont like it .. i kno, im the only one ... i wait for a NIghtly with this .35 kernel
- back the topic: OC 806MHz stable, antutu benchmark passed etc - i will test higher later
- wifi works perfectly, and i supose wifi responds a little quicker then on oryginal kernel
- rest i see is working with no bugs
- OC with antutu CPU Master
- battery life with no bigger drain
thx ron

Ok ron good work, the phone is a little better but on games it lags is the kernel or the rom stock v10e?

This is a bit off-topic but kinda relevant. Here's the deal, somewhere I read that V10I is not rootable, so just to confirm, up to which version of stock rom is rootable? V10G? Wanna go back to stock rom, root, load kernel (making it relevant)...

So I just went ahead and played safe... Flashed V10G, rooted it and installed the kernel... All I can say is thanks! Blazing fast even the first day it wasn't overclocked... Dont run benchmark tests, I dont trust them, but compare experiences, and by far this is the best!

I'm testing this kernel with Froyo 2.2.2. Do you planning to release kernel v3? Battery life is still bad.
Thanks.
Sent from my LG-P350 using Tapatalk 2

nikolaiffb said:
I'm testing this kernel with Froyo 2.2.2. Do you planning to release kernel v3? Battery life is still bad.
Thanks.
Sent from my LG-P350 using Tapatalk 2
Click to expand...
Click to collapse
How long does it lasts on your device? My batt can go for day and a half on normal usage...

dbarrera said:
How long does it lasts on your device? My batt can go for day and a half on normal usage...
Click to expand...
Click to collapse
Same to me but battery is drying at night while I sleep.
12% was consumed in 8 hours of sleeping.
Maybe Dev of kernel can add more Governors, like ondemandX, interactiveX.
Edit : I changed governor to conservative and now it's a bit better.

Unofficial-Official JellyBean for P930/935/936 + Sphinx V4.1

Unofficial-Official JellyBean for P930/935/936
Unofficial-Official JellyBean for P930/935/936 - N2 - with working WiFi. Just clean ROM like original from SU640.
Download: (Need minimum 630mb free size on System part )
http://dfiles.ru/files/w4gujg5ef
For information:
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
I unpack KDZ from SU640, and repack System part.
Deleted all Operator Apps and Google Apps, remove SecurityCheck, adapt ROM for GSM, and now size of ROM ~ 630mb. And we can flash it via CWM without problem on old partition table and it working with old MODEM.
I ported new kernel 3.4 from LG F120S and SU640, adaptive it for P930.
My port Sphinx V4.1 - 4.1.2 JB for P930
Probably fix copability with different bootloaders;
Rework battery and charger drivers;
Translated to RUS/UKR
Need 646mb. free space on System part!
Download:
http://dfiles.ru/files/1er0nv65u
First patch for Sphinx ROM
Fix some bugs in sound driver;
Fix proximity sensor;
Some fixes for telephony.
Download: Global_Patch_1.zip
Second patch for Sphinx ROM
Fix random boots during sleep;
Added 2 new LG apps: PhotoAlbum widget + Photo wallpaper;
Restore EasySettings.
Download: Global_Patch_2.zip
Bugs:
Blue screen of death on Widows PC (try different mode connections); - turn-off "USB-debug"
Big thanks All authors who made Sphinx ROM!

Link available!

Awesome, awesome work. Can't wait to have official 4.1.2 on the P930!

miroslav_mm said:
Unofficial-Official JellyBean for P930/935/936
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
Click to expand...
Click to collapse
Will this introduce any problems if switching between the already existing ICS, CMx ROMs other than needing the corresponding gapps lite from there on out?

I would be interested in your 3.4 kernel. Do you have the source on github?

I also be interested in his 3.4 kernel
tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse

tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.

miroslav_mm said:
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.
Click to expand...
Click to collapse
Thanks for your work!
I have flashed this rom on my ATT P930，but Phone has been restarted and cant get into system.
so I restore to 20E.
Looking forward to your 3.4 kernel too!

navik said:
Thanks for your work!
Phone has been restarted and cant get into system.
so I restore to 20E.
Click to expand...
Click to collapse
Did you wipe your Phone via recovery? Its working without any problem.

miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Yeah no problems here. But I did install through CWM and not ROM manager. Out of habit I install new ROMs through CWM due to issues I have had with installing new ROMs through ROM manager.
Sent from my LG-P930 using xda app-developers app

miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Sure，I used recovery 5.82 and had wiped data ，wipe cache and wipe dalvik cache.
Thanks for reply and your work.
I will try again！
Sent from my LG-SU640 using xda premium

What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
EDIT: Got the answer here for those interested: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
Btw, great work.

just1nsama said:
What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
Click to expand...
Click to collapse
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....

miroslav_mm said:
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....
Click to expand...
Click to collapse
Alight thanks ... i found more specifics here: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
I see you created the repo on your github, but as of now it is empty, will you be adding the content in the near future ? Would really like to compile a PAC build with it and try it out
Thanks and keep up the good work :good:

Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.

tdmcode said:
Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.
Click to expand...
Click to collapse
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!

miroslav_mm said:
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!
Click to expand...
Click to collapse
CM took the lu6200 ICS sources and added display stuff from caf.
The original lge ICS ota was unstable for all iproj devices.
I have a weak p930 that will be the judge of the new 3.4 kernel. It reboots about every 5 to 15 minutes under the ics kernel. I will try when I get sources... No sources, no install...

Can't wait to flash this once WiFi is working
I don't have unlimited data and use WiFi a lot.

Flashed this ROM. It looks very good except WIFI issue. Am now testing battery drain. Looking for WiFi fix.

I've been checking this thread every
Hour for a WiFi fix... I use this as a WiFi only device so the lackthereof is a killer right now for me... That being said if anyone has a lead on what's breaking it I would love to help find a fix for the problem. Really never thought we would see a jb release for our device from LG but I believe it will be a major stepping stone for future development of our P93x's. Once again I wanna thank miroslav and all the other great devs and tinkerers who bust their asses to make our phones into beasts, and I look forward to seeing what awesomeness will come with these recent leaks.
Sent from my LG-P930 using xda app-developers app

[Q&A][FAQ] PAC-man 4.3

This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE

wedgess said:
This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE
Click to expand...
Click to collapse
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??

arc_n_krizt said:
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??
Click to expand...
Click to collapse
Finally some one who uses the Q&A.yes it should support AOKP/CM themes.

I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.

setup wizard pac-man
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1

ghostmirror said:
I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.
Click to expand...
Click to collapse
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
dimmalimm said:
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1
Click to expand...
Click to collapse
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.

i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance

Bagne said:
i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance
Click to expand...
Click to collapse
See I'm pretty sure its the kernel giving random reboots. But with LuPuS or Fusion kernel, WiFi and Bluetooth will not work on 4.2.

Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?

Bobby2013 said:
Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?
Click to expand...
Click to collapse
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.

wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!

Bobby2013 said:
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!
Click to expand...
Click to collapse
Paranoid was last updated before 3.x kernels were released.
Sent from my PAC-ed LT18i.
Press the thanks button if I helped.

wedgess said:
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.
Click to expand...
Click to collapse
I instal the ROM with full gapps and it is running fine now. In one day of testing I got one fc and one random reeboot. Thanks for the info.
Sent from my Xperia Arc S using xda app-developers app

wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
yea do this as soon as possible. 2.6 kernel + cm10.1 = Super Awesome and stable
Sent from my Xperia Arc using xda premium

Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app

theNfan said:
Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app
Click to expand...
Click to collapse
Yes u can post here also. Comparing any 4.2 ROM to STOCK ICS, stock ICS would be the winner in terms of stability. 4.1 is the best if you want JB IMO. But 4.2 and especially PAC 4.2 has a lot more features, customization amongst other things. It doesn't matter on the kernel its going to be the same. This is why FXP stopped developing after CM10 for the XPERIA 2011 line-up. It will never be 100% stable as will any 4.2 ROM for Xperia 2011.

I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.

sinholueiro said:
I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.
Click to expand...
Click to collapse
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.

wedgess said:
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.
Click to expand...
Click to collapse
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium

jithuelad said:
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium
Click to expand...
Click to collapse
yes and that's instability my friend
Sent from my Xperia Arc S using xda premium

(Q) Which Kernel?

Which kernel is best and most stable to use with stock ROM as I'm new to this device just seeing what other users opinions are that have been using it for some time.
Also does Odin have to be used for flashing is can it be done threw the standard procedure of going into recovery and flashing via install zip?
Thanks in advance
Sent from my GT-I9195 using Tapatalk

Most stable is the kernel by arco68 made for rooted stock roms.
Yes, some kernels can be flashed via CWM provided they are the correct format.

Whosat said:
Most stable is the kernel by arco68 made for rooted stock roms.
Yes, some kernels can be flashed via CWM provided they are the correct format.
Click to expand...
Click to collapse
Would you be able to link that kernel thread as the 1 I have found closest to that was 1 based on arco68 kernel.
Thanks again for the help and responses much appreciated.
Sent from my GT-I9195 using Tapatalk

Scopewiz said:
Would you be able to link that kernel thread as the 1 I have found closest to that was 1 based on arco68 kernel.
Thanks again for the help and responses much appreciated.
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=43622999
Optional: Flash GT-I9195_Kernel_v1.zip to use a custom stock kernel, which might fix battery drain for some.
Kernel changelog: https://github.com/arco/android_kernel_samsung_msm8930-common/commits/stock
Click to expand...
Click to collapse
Its an attachment in the post

I noticed that before as I used that guide for rooting but was looking for a kernel with a few more features but if this is the best to date I'll stick with that, thanks again.
Sent from my GT-I9195 using Tapatalk

You're looking for stability so that's the most stable.
I'm personally using f4ktion's 1.3.6 but that version is currently only for AOSP roms. Sticking with Samsung stock roms you only have f4ktion's 1.3.0 to play with but some have reported that its features (BLN) are not working.

Vikinger Kernel is based on arcos modified stock kernel with the extra of bln-feature. Should be as stable as arcos. Never faced unstability and I am using it since release

junkyde said:
Vikinger Kernel is based on arcos modified stock kernel with the extra of bln-feature. Should be as stable as arcos. Never faced unstability and I am using it since release
Click to expand...
Click to collapse
Are you talking about his kernel? http://forum.xda-developers.com/showthread.php?p=47893414
Sent from my GT-I9195 using Tapatalk

yes

My favourite would be F4ktion's, and I spent the last week on it.
Unfortunately the wifi seems to be broken - works at first, but sooner or later (typically within a few hours) something happens, phone becomes hot, wifi can't be switched off, and everything becomes laggy.
Battery will last two-three hours once that happens and the phone will blame wifi for 90% of battery usage.
Only reboot fixes it, until it happens again.
During the last week I was experimenting with different solutions such as using stock's configuration files (the stuff under etc/firmware/wlan/prima) as well as trying to replace the prima kernel module from other kernels. Nothing helped.
(well, most of my attempts made wifi not work lol, the few that worked didn't fix the problem)
If anyone has any ideas what else to try, it would be great -- the kernel was great otherwise (after lowering minimal frequency down to 160-ish MHz battery prediction exceeded 6 days, and that's before I undervolted anything).
In the meantime I'm on Vikinger's kernel - not because I use its features but because installing it was the easiest way to get wifi working again,

Does Vikinger's custom kernel support performance control where you can change clock support etc?
Sent from my GT-I9195 using Tapatalk

Scopewiz said:
Does Vikinger's custom kernel support performance control where you can change clock support etc?
Click to expand...
Click to collapse
No
No clock change beyond what stock has, no undervolting.
It doesn't have any interesting governors either.

like I said. It's just arcos kernel with the extra of bln support. you could have get that information from the first post of the vikinger kernel thread. all features are mentioned there