Baseband Update Tutorial
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Tool
Stock ICS Baseband
A PC
Patience
Now can't force more......
Click to expand...
Click to collapse
Install drivers
Open Download tool, set your handset into QPST Download mode (Power key+ Voice down key) and connect your phone with USB cable.
Click set path>Browse folder>Select 591379_8376_WCDMA_V000003(By Guneet) where you extracted it
Click Check Port
Take a deep breath and Click Download All
Click to expand...
Click to collapse
Congrats You have successfully updated your baseband
Your splash.img will disappear and blank screen will come don't worry just flash Recovery again(See Downloads
--------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------
Baseband
Download Tool
Updated CWM Recovery
Himalayoee
Prasad
Arjun Rajput
Me
Hereis the Official thread for ICS/JB for Karbonn A5/A7 and Walton Primo
Video Tutorial for Installing Drivers(By Vikas)
succed! thanks a lot!!!!
yes it will work fine!
thanks:laugh::laugh::good::good:
How to donwgrade baseband!
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
The Droid Master said:
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
Click to expand...
Click to collapse
thanks very very much:laugh::laugh::victory::victory:
helpppp
The Droid Master said:
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
Click to expand...
Click to collapse
How to downgrade baseband in a7+??????????? i mean which is the factory baseband???? links plssssssss
ankit99 said:
How to downgrade baseband in a7+??????????? i mean which is the factory baseband???? links plssssssss
Click to expand...
Click to collapse
i dont own that device and u try out with the a7's stock baseband it will work fine.
The Droid Master said:
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
Click to expand...
Click to collapse
Doesn't help...
I did everything correctly...
and when I click on download....It checks the NRP.....file and says go ok.
Then.....BP Download failed.....
Arushvds said:
Doesn't help...
I did everything correctly...
and when I click on download....It checks the NRP.....file and says go ok.
Then.....BP Download failed.....
Click to expand...
Click to collapse
dont add the nprg file to the gb baseband it will fail then i have already mention there in block letters
The Droid Master said:
dont add the nprg file to the gb baseband it will fail then i have already mention there in block letters
Click to expand...
Click to collapse
I haven't added it...But still it fails...
Do we have to delete the old NRPG file...???
Arushvds said:
I haven't added it...But still it fails...
Do we have to delete the old NRPG file...???
Click to expand...
Click to collapse
what is the size of the file you downloaded.have you download the right one which i have mentioned.
The Droid Master said:
what is the size of the file you downloaded.have you download the right one which i have mentioned.
Click to expand...
Click to collapse
File Name: 591316_8376_WCDMA_V3025
File Size: (before extraction) : 23.2 MB
(after extraction) : 70.1 MB
Arushvds said:
File Name: 591316_8376_WCDMA_V3025
File Size: (before extraction) : 23.2 MB
(after extraction) : 70.1 MB
Click to expand...
Click to collapse
then you have downloaded the right file.Have you installed the right drivers.
The Droid Master said:
then you have downloaded the right file.Have you installed the right drivers.
Click to expand...
Click to collapse
Yes I do have the proper drivers..If I didn't have had them then how would I have updated my baseband..
The Droid Master said:
then you have downloaded the right file.Have you installed the right drivers.
Click to expand...
Click to collapse
And yeah the procedure was further done...
after the go ok...it starts downloading some files...
After that....A red screen with Ap (and some chinese language written) appears on the fastboot status screen.......
and then nothing happens..My phone boots with the normal way...
When I restore any backup, it says, MD5 mismatch...
and when I install any new ROM, it says download complete but nothing happens.....
Great Job !
Awesome ! Just Great Job .....
Hopefully these Chinese Phones are Kicking Ass Outta the other phones in the Range ! :laugh:
Arushvds said:
And yeah the procedure was further done...
after the go ok...it starts downloading some files...
After that....A red screen with Ap (and some chinese language written) appears on the fastboot status screen.......
and then nothing happens..My phone boots with the normal way...
When I restore any backup, it says, MD5 mismatch...
and when I install any new ROM, it says download complete but nothing happens.....
Click to expand...
Click to collapse
the chinese message will come its all normal you have not properly backed up the rom i think so you should download the backup file provided in the group(fb).
The Droid Master said:
the chinese message will come its all normal you have not properly backed up the rom i think so you should download the backup file provided in the group(fb).
Click to expand...
Click to collapse
The Chinese message comes on a RED SCREEN...
Tried many backups and also tried the Storm rom.....But doesn't work..
Really stressed...Phone is bricked...
Related
This is not my work, all credits goes to mr. devcon69.
Original Site
- THIS IS INTENDED FOR LG OPTIMUS LTE (SU640) ONLY. PLEASE DON'T TRY ON OTHER LG OPTIMUS LTE VARIANTS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- I'M NOT LIABLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE. DO AT YOUR OWN RISK.
- PLEASE USE A LAPTOP OR A PC WITH A BACKUP POWER SUPPLY IF POSSIBLE TO AVOID HARD BRICKING YOUR PHONE IN CASE OF POWER FAILURE.
- AVOID USING CHEAP USB CABLES, USE THE ORIGINAL LG CABLE.
- I saved the tutorial for customizing the LG OPTIMUS LTE (SU640) as a PDF document.
- All the applications and the PDF tutorial are included in the zip file.
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
[Tutorial deleted, please use the old method at the end of this post or follow this one] We'll wait for mr. devcon69 for update. Sorry guys.
V30C JELLYBEAN FIRMWARE:
Mirror 1:
Mirror 2:
Mirror 3:
V30C_00.kdz MD5: E6EEA12AA5D164AC053203EC03A12AEA
After downloading the file run Md5Checker from the DRIVERS folder. Click Add and browse for the V30c_00.kdz file to verify the MD5 Checksum.
If it's different from the MD5 posted above then the downloaded file might be corrupted or incomplete.
Redownload the file. Use a download manager for faster downloading.
Click to expand...
Click to collapse
CUSTOM ROMS:
1. SU640 V30C ROM by TNT V3
Download: <click here for link>
Credits to tedofu_katozi and TNT Team
Based on Stock Jellybean V30c.
Can be used as daily driver
No SMS Limit
USSD Working
Qslide Available
Fixed bugs from v2
2. SU640 CyanogenMod (CM9/CM10)
Link
GAPPS (GOOGLE APPLICATIONS)
Flash after installing Cyanogenmod. Choose the right package please.
DON'T DO ANY WIPES AT ALL.
ICS/CM9: Link
JB/CM10: Link
Click to expand...
Click to collapse
3. GFAN.COM ROMS (Use google translate and register to the site to access all ROMS).
Link
4. TINHTE.VN ROMS (Use google translate)
Link
Link
5. Some other ROMS and stuffs
Link
To set english as default language on GFAN.COM & TINHTE.VN ROMS:
Open the rom/zip file on your PC with Winrar/Winzip. Open "system" folder and look for the "build.prop" file.
Extract the file and open with notepad or any text editor.
Look for these lines:
ro.product.locale.language=xx
ro.product.locale.region=XX
replace with
ro.product.locale.language=en
ro.product.locale.region=US
Save the file and place it back on the archive. DONE!
In case that the system folder is in "img" format (system.img). Search for ways to extract and edit android img files and how to recompile them.
Click to expand...
Click to collapse
***************************** CREDITS TO ALL THE VIETNAMESE & CHINESE DEVELOPERS *******************************
Click to expand...
Click to collapse
APN SETTINGS FOR GLOBE/TM/SMART/SUN (For Philippines only)
If you're not receiving any settings for your networks GPRS/3G/Mobile Internet configuration then download the file below and flash with CWM.
Don't do any wipes at all.
APN Settings for CWM: <click here for link>
After a successful flash. Go to Settings> More > Wireless & Networks > Mobile Networks > Access Point Names and Select desired setting.
Click to expand...
Click to collapse
DOWNLOAD MODE TROUBLESHOOTING:
If you have problems with booting to download mode.
TURN OFF the device, remove and reinsert the battery. Don’t turn on yet, hold VOLUME UP BUTTON THEN connect to your PC.
Click to expand...
Click to collapse
In case of a bootloop or if the device gets stuck on the bootscreen after a successful flash with stock firmware. Just hold power button to turn off the device, if it doesn't turn off remove the battery instead. Insert the battery to do a FACTORY RESET. Same as booting to CWM Recovery on custom rom.
(Press and hold Volume Down Button + POWER Button. Wait until a FACTORY HARD RESET prompt is displayed then release. Press POWER button TWICE to confirm FACTORY RESET)
Click to expand...
Click to collapse
IN CASE YOU'RE HAVING PROBLEMS WITH THIS METHOD TRY THE OLD ONE HERE:
TUTORIAL AND COMPLETE FILES: (Use Winrar/Winzip to extract files)
Mediafire
Mirror 2: GDrive
Mirror 3: FileFactory
V10i GINGERBREAD FIRMWARE:
Mirror
Mirror 2: GDrive
Mirror 3: Mediafire
(Join the files with HJSPLIT. A "V10i_00.kdz" file will be created)
Part 1
Part 2
Part 3
Part 4
Part 5
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
If you experience FC/not responding/errors on flashing the KDZ file TRY THIS METHOD.
Lg Nitro HD(P930/P935) rom ported for Su640
Thanks man! this is a precious guide. i used and successfully flash Cm9 on my phone!
i am just wondering if there is any At&T or Bell's rom ported for SU640 as i got one for LU6200 here
http://forum.xda-developers.com/showthread.php?t=1859922
thanks in advance, hope you will help me out!
GBU :good:
Re: [GUIDE] SU640 Rooting and CWM Recovery
I don't know if there's one, have you tried searching on other sites? I think there's a method where you will have to flash baseband.img in order to install roms for p93x. I didn't try, I'm happy with miui. and I'm not sure about the method.
well thanks! i will search that. thanks for help
help
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...
Re: [GUIDE] SU640 Rooting and CWM Recovery
That's weird. Have you wiped the device? Wipe data, cache, and dalvik?
Re: [GUIDE] SU640 Rooting and CWM Recovery
Danial Ahmad said:
ok brothers i have done every thing fine i succesfully instaled custom rom on it but after one day i wanted to change the rom so i made backup of it and since then .I HAVE MESSED UP AND I DONT KNOW WHAT TO DO I INSTALLED THE ROM AND MADE BACKUP OF IT THROUGH RECOVERY AND NOW AFTER THAT WHEN I REBOOT MY LG SU640 IT STARTS BUT AFTER COMPLETLY OPENING WHEN I UNLOCK THE LOCK SCREEN IT HANGS AND RESTARTS AND SAME SAME AGAIN AND AGAIN. I REINSTALLED THE ROM ClEARED EVERYTHING AND REINSTALLED THE ROM STILL THE PROBLEM PRESIST.... GOT ANY IDEAS BROTHER? I TRIED ANOTHER ROM ALSO ON IT AND STILL THE SAME PROBLEM...
Click to expand...
Click to collapse
Ate you sure that the rom you installed is for su640?. Installing ROMs for p93x is incompatible with our device. Make sure that the developer of the rom states that its compatible for su640.
well thanks! i will search that. thanks for help
Dear expressions104!
TUTORIAL AND COMPLETE FILES links are dead.
Is it possible that you may re-upload the files.
Looking forward.
Links are up..
Thanks OP!
This made my life easy.
Thread updated! Links are up!
..
expressions104 said:
Links are up..
Click to expand...
Click to collapse
burahin mo n to pre, pra sating mga pinoy lang to eh.. tsk tsk
Hindi naman po masama mag share sir. Buburahin ko lang po ito pag kailangan ng burahin. Plus meron po akong permission from mr. Devcon69 na irepost dito sa xda ung thread.
Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?
Vol down + power button doesnt take you to recovery? Have you tried rebooter?
In case cwm is not installed try it once again. If it has the same result try the OLD METHOD.
rooting and cwm recovery
Arhum1994 said:
Thanks for the guide but i have a problem.
I cant install CWM recovery. Tried it two times but to no avail. The tutorial states that CWm is installed adn then it doesnt boot into CWM.
The device rooted succesfully though.
Any solution?
Click to expand...
Click to collapse
it simply means that your mobile is not rooted properly.thats why mobile not rebooting to cwm.
kindly root the mobile properly.if it again gives error , tell me
Attach a picture of the rooting guide after that it takes five minutes until the tutorial states that it is booting into CWM which it doesnt. I tried using rebooter to boot into CWM but using that i stumble upon a dead android with a exclamation mark over its stomach after the phone shuts down and tries to reboot into CWM.
Any solution?. And i updated my phone thorough LG software for the jellybean update.
Hi Guys, I'm currently on Custom PACROM and I'd like to try this Rom. Do I need to Flash this through LG Flash software? or I can just flash this through recovery?
Bootloop on SU640 V30C ROM by TNT V3
hey im having bootloop on that rom. ive done clean wipes but still bootlooping.
is it me whos doing wrong?
LG G2-D802 Unbrick Device by g0dsend313 (mlm1102003)
how to unbrick LG G2
v.2
learn how to unbrick your device when it cann't go to recovery/downloadmode or stuck in fastboot !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
important:
befor using this program:
1.make sure you cann't go to recovery menu or DownloadMode
Recovery menu : hold power+volume down,release when you see lg logo then hold again
DownloadMode : hold volume up then connect to pc
if you could go to downloadmode ,flash stock tot files
if you could go to recovery menue(twrp) go to advance=>terminal command then type
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
to fix downloadmode
2.make sure you install all needed drivers
Code:
http://storagecow.eu/Xda/LG%20G2/Stock/KitKat%204.4.2%20Firmwares/TOT%60s/LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1.exe
3.Fix 1 allways get everything fixed !(it is just for android 4.2.2)
its in order !if you cannt fix your device by "fix 1" then use fix2 and others(in order)
4.if you stuck at fastbootmode and cannt go to recovery menu/DownloadMode
(in other words you cannt do anythings!)
use "fix 4" if it cannt fix your device then use "fix 5"
befor using "fix 4"
you must download laf.img from this link and put it in bin folder
Code:
http://downloads.codefi.re/autoprime/LG/LG_G2
befor using "fix 5"
download "laf.img" and "recovery.img" from this link and put them in bin folder
Code:
http://downloads.codefi.re/autoprime/LG/LG_G2
(choosing carefully and wisely)
added : Fix 6
for 32gb d802 which show 16gb
first install 4.2.2 then root with supersuer
then use fix 6
then flash 4.2.2 with kdz
after first boot just hard reset ! and all done and the problem get fixed !
download the updated program in first post
if you have recovery but stuck at downloadmode
first download v2 then fx22.zip from one of the below links
and put that in bin folder
Code:
http://d-h.st/lhP
http://uptobox.com/30ag9syz0mj4
http://ul.to/6an3gxn4
then go to recovery menu choose apply update from sideload(or such thing)
then use fix 7
5.after each one test if you can go to recoverymenu/downloadmode
6.I'm not responsible if anything goes wrong !
Download :
Code:
http://d-h.st/FWK
http://ul.to/9lx9kqmz
http://uptobox.com/282ll0q1e77r
http://www.mirrorcreator.com/files/1XPDWBM1/LG_G2_Unbrick_g0dsend313_v2.zip_links
pass:
asrejavan
English : fix_en
Persian : fix_fa
sources:
Code:
http://forum.xda-developers.com/showthread.php?t=2451696
http://forum.xda-developers.com/showthread.php?t=2449670
http://forum.xda-developers.com/showpost.php?p=48765620
Thanks:
thecubed
WACOMalt
Partager.info
"asrejavan forum"
"[email protected]/\/\ID"
"dj yaghoob"
for helping and testing the program
How to enter into fastboot on D802?
Wysłane za pomocą LG G2 przez TWRP
Hazard17 said:
How to enter into fastboot on D802?
Wysłane za pomocą LG G2 przez TWRP
Click to expand...
Click to collapse
sometimes because of flashing the wrong file or power lost in flashing or something go wrong in flashing the rom does not fully flashed and just go to fast boot mode(like the picture in the first post)
mlm1102003 said:
sometimes because of flashing the wrong file or power lost in flashing or something go wrong in flashing the rom does not fully flashed and just go to fast boot mode(like the picture in the first post)
Click to expand...
Click to collapse
He asked how to enter fastboot, like on nexus devices
Sent from my LG-D802 using Tapatalk
black87 said:
He asked how to enter fastboot, like on nexus devices
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
i know what he asked i answered that because
(i think) there is no way to go to fastboot normally
I think the same. I tried enter fastboot and download via adb, and phone reboots normally .
If we had fastboot access, we'd easy can downgrade software. It's very simillar as NVflash in Tegra devices - you can't enter it normally, but only after flashing special custom AndroidRoot bootloader. Fastboot would allow us to install custom recoveries over official KitKat - so it has been removed from Samsung Devices, and repleced by Odin.
My Phone's Memory 32 gbt fell to 16 gbt please help
@up
Try to install stock for your phone
Hazard17 said:
@up
Try to install stock for your phone
Click to expand...
Click to collapse
I m try try try but 16 gb again
Had you installed stock for 32GB variant?
Wysłane za pomocą LG G2 przez TWRP
cimbom said:
I m try try try but 16 gb again
Click to expand...
Click to collapse
flash 32gb stock by tot method(using flashtool)
mlm1102003 said:
flash 32gb stock by tot method(using flashtool)
Click to expand...
Click to collapse
I m try. http://forum.xda-developers.com/showthread.php?t=2475045 this method but It did not work
cimbom said:
I m try. http://forum.xda-developers.com/showthread.php?t=2475045 this method but It did not work
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2432476
method 2
mlm1102003 said:
http://forum.xda-developers.com/showthread.php?t=2432476
method 2
Click to expand...
Click to collapse
thanks I m look now
cimbom said:
thanks I m look now
Click to expand...
Click to collapse
ı m try this method but It did not work (( again 16 gb
cimbom said:
ı m try this method but It did not work (( again 16 gb
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showpost.php?p=50790181&postcount=49
no hope?
Hello,
I just bricked my G2 (802) while flashing a recovery.img and now I only could boot to download mode.
If i want to boot to recovery it says secure boot failed or something like that.
I tried to flash back to stock by using .tot file but in Flash Tools i get a error message saying:
Model information check Fail!
If i try to flash a .kdz file I get a Page Error.
Someone knows another solution ?
UPDATE
I could fix it with another .ddl file using flash tools! (see attachment)
mlm1102003 said:
http://forum.xda-developers.com/showthread.php?t=2432476
method 2
Click to expand...
Click to collapse
Kickoff said:
Try this: http://forum.xda-developers.com/showpost.php?p=50790181&postcount=49
Click to expand...
Click to collapse
2 days at the comment does not ...Is there anything else I can try please
cimbom said:
2 days at the comment does not ...Is there anything else I can try please
Click to expand...
Click to collapse
Did you try my method? Did not work? Why?
Kickoff said:
Did you try my method? Did not work? Why?
Click to expand...
Click to collapse
I doing
On the phone use Total Commander to copy the files to /system/bin and change the permission to 755 on each. And
Type code in adb but Nothing's happening on the screen it was adb should remain
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.16 by @Androxyde
XZDualRecovery 2.7.90 BETA or newer.
Current rooted FW version: 10.4.1.B.0.101.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.123 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 10.5.A.0.230:
Files (Find them on the DevDB Download tab!):
For C6502: Download C6502_10.5.A.0.230.flashable.zip (890MB) and C6502_10.5.A.0.230_Stripped.ftf (17MB)
For C6503: Download C6503_10.5.A.0.230.flashable.zip (902MB) and C6503_10.5.A.0.230_Stripped.ftf (17MB)
For C6506: Download C6506_10.5.A.0.230.flashable.zip (903MB) and C6506_10.5.A.0.230_Stripped.ftf (17MB)
Save them somewhere you remember;
Put 'C65XX_10.5.A.0.230.flashable.zip' on (the external) SDcard1;
Put 'C65XX_10.5.A.0.230_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C65XX_10.5.A.0.230.flashable.zip' in TWRP (if you notice your phone reboot during the update process, update to the latest XZDualRecovery and try again);
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C65XX_10.5.A.0.230_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 10.4.1.B.0.101;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C650X][4.4] Update to 10.5.A.0.230 [Root & XZDR], ROM for the Sony Xperia ZL
Contributors
[NUT]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Abandoned
Current Stable Version: 10.5.A.0.230
Stable Release Date: 2014-05-24
Created 2014-05-24
Last Updated 2014-08-20
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
edit : availability 0 in torrent . :S
demonicangell™ said:
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
Click to expand...
Click to collapse
no, you didn't
That's the beauty of the DevDB, it allows me to create 2 more posts just under the OP if I need them
demonicangell™ said:
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
edit : availability 0 in torrent . :S
Click to expand...
Click to collapse
If you have a C6506 that's correct: I ran out of space ... created some and it will be online soon.
[NUT] said:
If you have a C6506 that's correct: I ran out of space ... created some and it will be online soon.
Click to expand...
Click to collapse
no trying to download 02 version ..
edit - same with 03 now ..
demonicangell™ said:
no trying to download 02 version ..
edit - same with 03 now ..
Click to expand...
Click to collapse
Well... then something is wrong at your end, as I am watching 7-10 people downloading both the 02 and 03 version.
06 version is now online.
[NUT] said:
Well... then something is wrong at your end, as I am watching 7-10 people downloading both the 02 and 03 version.
06 version is now online.
Click to expand...
Click to collapse
ok it started now dont know why it took so much time .. :good:
Ooww Great Work!
Thanks!
Sent from my C6503 using XDA Premium 4 mobile app
happy to report no lags in anything .. notification bar /settings or keyboard ..
flashed c6502 version .
Hi,
Can I go straight from 4.2.2 FW .67 rooted or do I need to update first to 4.3 FW .101 ?
I didn't try it yet, downloading files first.
It works with locked bootloader, right?
Thx!
Works fine as everytime. Thanks [NUT]!
---------- Post added at 05:18 PM ---------- Previous post was at 04:31 PM ----------
If you have issues writing to the external sdcard use this:
https://play.google.com/store/apps/details?id=nextapp.sdfix
Hi, I've got existenz ROM v5 installed. Can i install directly from that after doing a complete data/cache wipe?
fabioascoelho said:
Hi,
Can I go straight from 4.2.2 FW .67 rooted or do I need to update first to 4.3 FW .101 ?
I didn't try it yet, downloading files first.
It works with locked bootloader, right?
Thx!
Click to expand...
Click to collapse
It should work, but as I have no ZL to play with nor did I test it on anything else then 101 I'd say: create a solid backup and just go for it. In theory it should work between any stock rom based on 4.2.2 and up.
[NUT] said:
It should work, but as I have no ZL to play with nor did I test it on anything else then 101 I'd say: create a solid backup and just go for it. In theory it should work between any stock rom based on 4.2.2 and up.
Click to expand...
Click to collapse
I have the same configuration and it worked for me!
sid3091 said:
Hi, I've got existenz ROM v5 installed. Can i install directly from that after doing a complete data/cache wipe?
Click to expand...
Click to collapse
Me, too. Since Existenz 5 is .101 will it work? Would love to update on my upcoming nightshift!
detective zero said:
Me, too. Since Existenz 5 is .101 will it work? Would love to update on my upcoming nightshift!
Click to expand...
Click to collapse
yea i came from existenz v5 too . no issues
Once more we must thank @Nut a lot for making it possible to have the latest Xperia FW with root. Thanks very much. Still I have one question. On .569 and .101 though I installed the SuperSU fix, after installing rom, I still had problems using Foldermount with remount/reboot issue.
Then I solved it again applying your Remount/Reboot fix tool kit.
Could you please tell me if the issue hapens again with 4.4.2, I will be able to fix with the same tool?
Best regards.
demonicangell™ said:
yea i came from existenz v5 too . no issues
Click to expand...
Click to collapse
Did you do a full wipe or just update?
I don't get it to work. I'm always stuck on "formatting system" and screen flickers. Tried both updating and full wipe first... Any ideas?
detective zero said:
Did you do a full wipe or just update?
I don't get it to work. I'm always stuck on "formatting system" and screen flickers. Tried both updating and full wipe first... Any ideas?
Click to expand...
Click to collapse
Update xzdualrecovery to the latest version and try again, if it still fails...
I know this is going to sound odd but do it, for real:
Grab another external sdcard or use an USB otg device....
lclaudiogb said:
Once more we must thank @Nut a lot for making it possible to have the latest Xperia FW with root. Thanks very much. Still I have one question. On .569 and .101 though I installed the SuperSU fix, after installing rom, I still had problems using Foldermount with remount/reboot issue.
Then I solved it again applying your Remount/Reboot fix tool kit.
Could you please tell me if the issue hapens again with 4.4.2, I will be able to fix with the same tool?
Best regards.
Click to expand...
Click to collapse
Foldermount really needs to get fixed somehow because the reboot remount fix is fully integrated in xzdualrecovery... It's probably even better in xzdualrecovery then in the fix... Foldermount probably does something which just sets all alarms off in the rom or screws about with something zygote goes mad about...
Hello All
Lollipop Official FlashFile is Here
Sorry I was not came online from last many days. So Sorry for all the person who msg me but i cant able to help them..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please find links Of Flash File, Flash-tool And Drivers
Links ::
FlashFile L Update :: Download From Here
Old Flash File KK :: Click Here
Download Tool :: Click Here
Drivers :: Click Here
Note ::
i)For Flashing Lollipop There is no change in Process of Flashing
ii)Bootloader Must b unlock before Flashing ( This is for Who who not able to flash..)
Flashing procedure :: As per request got from Many users ...
Download the Flashtool From Here Flashtool
Extract it to a any location on ur pc
In Folder of SP Flashtool u can file One exe file "flash_tool.exe" Open It
in right hand site there is Option for "Scatter-Loading" Click on it
Now give path to your folder where ur flashfile is Extracted Nd Select "MT6582_Android_scatter.txt" This file from it
Now Simple Click on Download Button which is available on Left hand Side or Simpally use Ctrl+D Connect your phone without bettry.(if Not Flashing then u need to unlock your Bootloader)
Then Flashing will started.
Any query Feel free and contact me...
Hi how did u get this flash file??
coolkoushik07 said:
Hi how did u get this flash file??
Click to expand...
Click to collapse
Why Any Issue with this ????
mohsin24 said:
Why Any Issue with this ????
Click to expand...
Click to collapse
No if u have made this stock rom by dumping or some other process then i wanna know because i have spice variant and i also wanna get the stock rom..
Sent from my D5503
mohsin24 said:
Hello All
Any query Feel free and contact me...
Click to expand...
Click to collapse
This seems legit.
I have successfully booted both the recovery and bootimg and can confirm that the build prop matches that of the mmx android one on mounting system and oem.
How did you get this?
Did you dump this or is it leaked?
EDIT : Now I see how you got it
joshuab227 said:
This seems legit.
I have successfully booted both the recovery and bootimg and can confirm that the build prop matches that of the mmx android one on mounting system and oem.
How did you get this?
Did you dump this or is it leaked?
EDIT : Now I see how you got it
Click to expand...
Click to collapse
coolkoushik07 said:
No if u have made this stock rom by dumping or some other process then i wanna know because i have spice variant and i also wanna get the stock rom..
Sent from my D5503
Click to expand...
Click to collapse
This Is Original Stock Flash-file Without any Changes See My profile.. u will knw that from where i got this file
mohsin24 said:
This Is Original Stock Flash-file Without any Changes See My profile.. u will knw that from where i got this file
Click to expand...
Click to collapse
Hi can you manage stock flashable rom for spice variant too??
coolkoushik07 said:
Hi can you manage stock flashable rom for spice variant too??
Click to expand...
Click to collapse
K I will try .if i got.. i will mirror it...
I have successfully flashed the factory images provided.
It also restores the warranty value to yes which can be viewed using "fastboot getvar all".
You are a true Android messiah for saving my phone. Thanks man... keep it up!!!
joshuab227 said:
I have successfully flashed the factory images provided.
It also restores the warranty value to yes which can be viewed using "fastboot getvar all".
Click to expand...
Click to collapse
Mence bro ..sorry i cant got u .. that what u want to say..
mohsin24 said:
Mence bro ..sorry i cant got u .. that what u want to say..
Click to expand...
Click to collapse
I was just saying that the images you posted work perfectly and also resets the warranty of the phone which is lost after unlocking the bootloader.
Relocking the bootloader does not reset the warranty but flashing your images did.
joshuab227 said:
I was just saying that the images you posted work perfectly and also resets the warranty of the phone which is lost after unlocking the bootloader.
Relocking the bootloader does not reset the warranty but flashing your images did.
Click to expand...
Click to collapse
:angel::angel: K bro Thanks
joshuab227 said:
I have successfully flashed the factory images provided.
It also restores the warranty value to yes which can be viewed using "fastboot getvar all".
Click to expand...
Click to collapse
Nice. truly a savior. Thanks @mohsin24, you rock buddy
can we flash it on micromax unite 2 a mtk6582 device??
Flashing procidure is same as like Normal MTK Phone Flashing ..
Any query Feel free and contact me...
Dear Mohsin bhai,
I am using micromax unite 2 A106 it has same hardware mtk6582 processor 1GB RAM 4GB ROM.
can we flash it on micromax unite 2 a mtk 6582 device??
if some modifications required in unite 2 A106 kindly advice and give some solution also.
a sharma
sharing is power
asharma7 said:
Flashing procidure is same as like Normal MTK Phone Flashing ..
Any query Feel free and contact me...
Dear Mohsin bhai,
I am using micromax unite 2 A106 it has same hardware mtk6582 processor 1GB RAM 4GB ROM.
can we flash it on micromax unite 2 a mtk 6582 device??
if some modifications required in unite 2 A106 kindly advice and give some solution also.
a sharma
sharing is power
Click to expand...
Click to collapse
Do not flash it directly.. You need to b port this rom to your device if porting is success then you can able to use this rom to you Unit 2 phone.. My 1 Frind trying to port this rom to A106 (Unit 2) if he wills success then i will infrom you
mohsin24 said:
Do not flash it directly.. You need to b port this rom to your device if porting is success then you can able to use this rom to you Unit 2 phone.. My 1 Frind trying to port this rom to A106 (Unit 2) if he wills success then i will infrom you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2887916
100℅ genuine ROM thank u mohsin bro
Sent from my Micromax AQ4501 using Tapatalk 2
varunrocks17 said:
100℅ genuine ROM thank u mohsin bro
Sent from my Micromax AQ4501 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Bro
I can't able to flash, I have install the drivers,
I have flashed other mtk android phones but this phone cannot detect.
Is there any boot key to press before inserting usb cable? cos my usb connector is good, i use it before to copy files.
My phone is pattern lock and I want to flash to reset the lock, It can't hardreset. after pressing volup+pwr and going to recovery mode, the factory reset option is not showing, it stuck on android triangle logo.
Need help.
Today, I use the Nexus's wire brush reboot into Nokia N1's Bootloader successfully .
So, I think the Nexus's rom could be worked on Nokia N1.
I had checked the Nokia N1 's kernel version , it seems like the Asus Pad rom.
I hope someone could give me a hand to finish it together .
Thank you !
Velunce said:
Today, I use the Nexus's wire brush reboot into Nokia N1's Bootloader successfully .
So, I think the Nexus's rom could be worked on Nokia N1.
I had checked the Nokia N1 's kernel version , it seems like the Asus Pad rom.
I hope someone could give me a hand to finish it together .
Thank you !
Click to expand...
Click to collapse
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:
sadfrog_lin said:
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:
Click to expand...
Click to collapse
It's a really good news.
sadfrog_lin said:
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:
Click to expand...
Click to collapse
Can you post more detailed instructions ? please !
And wich Nokia ROM version you have ?
sadfrog_lin said:
I've rooted my N1 and installed GAPPS by following This Post. Really Thanks to the author to complete N1.
You need to download the IntelAndroid-FBRL 05-16-2015 Public Trail Release, and choose the "T4" trigger
So, by applying tethered CWM, flush the rom into N1 can be no difficulty, I think.
Have a nice day :good:
Click to expand...
Click to collapse
I mean that ....... . I could be find a way to wire brush the Nokia N1 without root .
So , I need your rooted nokia n1's pics .
Can give me a favor?
Thanks a lot !
Velunce said:
I mean that ....... . I could be find a way to wire brush the Nokia N1 without root .
So , I need your rooted nokia n1's pics .
Can give me a favor?
Thanks a lot !
Click to expand...
Click to collapse
I can confirm. This method work fine !!!!!
I write small step by step manual for Rooting and installing GApps
http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
About pics :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rumambo said:
I can confirm. This method work fine !!!!!
I write small step by step manual for Rooting and installing GApps
http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
About pics :
Click to expand...
Click to collapse
Yesterday, I was success root and install gapps.
But Chrome was crash when run( play store said not compatible with N1 But I was install from backuped APK)
I was erase all data and cache but can't run.
Any guys have idea solve this issue?
rumambo said:
I can confirm. This method work fine !!!!!
I write small step by step manual for Rooting and installing GApps
http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
About pics :
Click to expand...
Click to collapse
How about OTA updates? Is there a way to update firmware if it stops working?
Best regards
stuck at recovery 3e
yesterday, i used temp cwm recovery to create a nandroid backup, then i restore it. After that, it alway boot into recovery 3e. Anyone have solution?
alan_greece said:
yesterday, i used temp cwm recovery to create a nandroid backup, then i restore it. After that, it alway boot into recovery 3e. Anyone have solution?
Click to expand...
Click to collapse
Have you solve your problems?
still waiting for solutions
Reflash the full device: Download the 204 update ( http://forum.xda-developers.com/showpost.php?p=59750742&postcount=2 ) and reflash the full system. If it works please write it down how it went.
syddd said:
Reflash the full device: Download the 204 update ( http://forum.xda-developers.com/showpost.php?p=59750742&postcount=2 ) and reflash the full system. If it works please write it down how it went.
Click to expand...
Click to collapse
Test that with sideload.
But it's fail. Can't write over newer build.
soondin said:
Test that with sideload.
But it's fail. Can't write over newer build.
Click to expand...
Click to collapse
did you try sideload via temp cwm?
soondin said:
Test that with sideload.
But it's fail. Can't write over newer build.
Click to expand...
Click to collapse
h_t_t_p://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN507_update.zip
this can be sideload in recovery 3e. (To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!:laugh::laugh
Xkernels said:
http://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN507_update.zip
this can be sideload(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!:laugh::laugh
http://www.fc811.com/OTA/login
waitting for hacking:laugh:
old version:http://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN410_update.zip
Click to expand...
Click to collapse
alan_greece said:
did you try sideload via temp cwm?
Click to expand...
Click to collapse
As many as I know.
Temp CWM not support Sideload
soondin said:
As many as I know.
Temp CWM not support Sideload
Click to expand...
Click to collapse
how did you install gapps and root?
---------- Post added at 05:23 AM ---------- Previous post was at 05:20 AM ----------
Xkernels said:
h_t_t_p://ota-service.oss.fc811.com/upload/Nokia/moorefield/Nokia_N1/N1-china2015/A5CN507_update.zip
this can be sideload in recovery 3e. (To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!:laugh::laugh
View attachment 3336188
Click to expand...
Click to collapse
perfect! it's work, thx
alan_greece said:
how did you install gapps and root?
Before Temp CWM copy zip files to Internal storage and install zip .
Click to expand...
Click to collapse