No signal - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hey everyone i recently install a rom posted by a user at the following threat http://forum.xda-developers.com/showthread.php?t=2033132 both mine and my gf's s3's, my install went flawlessly but hers had an issue. the signal was very weak, at first we thought it was a reception problem cause some text and calls were going through (and when i say some i mean almost none). then i went poking around and saw the imei was showing 0, the phone had been rooted with cwm installed on it, so i used so of the tools and the tutorials i found on these forums to restore the imei but still very weak and losing signal, on reboot of the phone there is no signal at all, so i kept on reading in the forums and tried to flash a modem but nothing still, then installed cm10 stable and still nothing finaly i gave up and installed stock rom unrooted the device, used triangle away and all that and still nothing even installed the latest ota updates and still nothing, im at the end of my rope lol and my gf is about ready to kill me, any help would be greatly appreciated . im with bell model number is i747m, the base band that it currently has is i747mvldlk4

ckavvouras said:
Hey everyone i recently install a rom posted by a user at the following threat http://forum.xda-developers.com/showthread.php?t=2033132 both mine and my gf's s3's, my install went flawlessly but hers had an issue. the signal was very weak, at first we thought it was a reception problem cause some text and calls were going through (and when i say some i mean almost none). then i went poking around and saw the imei was showing 0, the phone had been rooted with cwm installed on it, so i used so of the tools and the tutorials i found on these forums to restore the imei but still very weak and losing signal, on reboot of the phone there is no signal at all, so i kept on reading in the forums and tried to flash a modem but nothing still, then installed cm10 stable and still nothing finaly i gave up and installed stock rom unrooted the device, used triangle away and all that and still nothing even installed the latest ota updates and still nothing, im at the end of my rope lol and my gf is about ready to kill me, any help would be greatly appreciated . im with bell model number is i747m, the base band that it currently has is i747mvldlk4
Click to expand...
Click to collapse
I have the same problem, I am looking how to fixing it. If you find a way, please PM me.

Related

[Q] No Signal After 4.2 Camera zip Flash

Hey xda,
First time posting here and I've looked all over for a couple days to see what could fix this but here's the story:
I've been running CM10 for T-Mobile on my SGH-T999v (WIND mobile) for weeks and all has been great. Last night I reeeeeeeally messed up when I flashed a .zip file that had the Google Camera 4.2 from here. I didn't make a back-up image which was stupid of me.
Anyways, now I have no signal and when it does connect after an hour or so, it connects to Roaming. I've wiped everything and reflashed the rom to no luck and I'm beginning to think it has something to do with the radio or the files to do with it. Under Settings>About Phone>Status, my Signal Strength reads 0dBm 99asu.
Also, when I enter the SIM toolkit and try to select anything, it displays "ME encountered a temporary error" so it could have to do with the SIM files. How can I get my phone signal back to normal?
Any help would be appreciated as the last thing I want to do is send it in for repair because I can't even find a stock ROM for my phone.
Thanks so much xda!
brandonlieng said:
Hey xda,
First time posting here and I've looked all over for a couple days to see what could fix this but here's the story:
I've been running CM10 for T-Mobile on my SGH-T999v (WIND mobile) for weeks and all has been great. Last night I reeeeeeeally messed up when I flashed a .zip file that had the Google Camera 4.2 from here. I didn't make a back-up image which was stupid of me.
Anyways, now I have no signal and when it does connect after an hour or so, it connects to Roaming. I've wiped everything and reflashed the rom to no luck and I'm beginning to think it has something to do with the radio or the files to do with it. Under Settings>About Phone>Status, my Signal Strength reads 0dBm 99asu.
Also, when I enter the SIM toolkit and try to select anything, it displays "ME encountered a temporary error" so it could have to do with the SIM files. How can I get my phone signal back to normal?
Any help would be appreciated as the last thing I want to do is send it in for repair because I can't even find a stock ROM for my phone.
Thanks so much xda!
Click to expand...
Click to collapse
don't know if you noticed but you posted under tmobile usa galaxy note 2.
brandonlieng said:
Hey xda,
First time posting here and I've looked all over for a couple days to see what could fix this but here's the story:
I've been running CM10 for T-Mobile on my SGH-T999v (WIND mobile) for weeks and all has been great. Last night I reeeeeeeally messed up when I flashed a .zip file that had the Google Camera 4.2 from here. I didn't make a back-up image which was stupid of me.
Anyways, now I have no signal and when it does connect after an hour or so, it connects to Roaming. I've wiped everything and reflashed the rom to no luck and I'm beginning to think it has something to do with the radio or the files to do with it. Under Settings>About Phone>Status, my Signal Strength reads 0dBm 99asu.
Also, when I enter the SIM toolkit and try to select anything, it displays "ME encountered a temporary error" so it could have to do with the SIM files. How can I get my phone signal back to normal?
Any help would be appreciated as the last thing I want to do is send it in for repair because I can't even find a stock ROM for my phone.
Thanks so much xda!
Click to expand...
Click to collapse
There is a stock thread on the development section. I have the wind variant as well.
Sent from my SGH-T889V using xda app-developers app

[Q] Lost IMEI now stuck in boot loop after ODIN to stock

Hello,
I'm having a lot of difficulty getting my Note II (SGH T889V) in working order . I'll try to explain the situation in an organized way. Thank you for your time and kind help!
Background
I have a Note 2 from Wind Mobile in Canada - SGH T889V. I got it 2.5 months ago. It was rooted, was running TWRP and I only loaded one ROM, flashed once, on it - 4.1.2 modified touchwiz ROM. Never once had an issue. The ROM was super stable and in great working order.
I got it unlocked about 2 weeks ago because I was visiting the states. When I got to the states, I put in a T-Mobile sim card which was working great for a few days. One afternoon during my vacation I was having slow data issues, so I thought to change the modem/radio from a Wind Mobile radio to a T-Mobile radio. That gave me 4G data speeds but killed my calls. So I tried to go back to the Wind Radio and that had my phone complaining that there was no SIM card. I went back to the T-Mobile radio and I got calling back but only 2G data.
My IMEI was corrupted - it showed up as zero. I left the T-Mobile radio on the phone when I got back. My home network wouldn't recognize me and thought I was still roaming.
Attempted Fixes
Tried a basic factory reset. Tried a different ROM. Tried wiping all internal data.
I got home and tried to flash to stock ROMs found on XDA for Wind Mobile phones. That didn't solve the issue. The IMEI remained null. The phone would reboot automatically every few minutes unless I turned Airplane Mode on. I figure the phone was looking for a signal and couldn't because of the IMEI problem.
So I looked around on the net and found a link about injecting the IMEI back using QPST (http://forum.xda-developers.com/showthread.php?t=1206275) but I couldn't get the program to detect my phone so I gave up and thought I could just get my binary count to 0 and stock and I'll just take it back for warranty.
I tried Triangle Away but I couldn't get the counter to go to 0 even with stock ROM and recovery. So I thought I would take it to a cell repair shop locally. I took it there and all they did was cause an issue on the phone to make it appear that KIES firmware upgrade failed so that it would be repaired under warranty. You would see a emergency firmware upgrade error the minute you turned the phone on. However, download mode still showed the custom binary count at 1, they didn't get it down to 0.
I spoke with my carrier and with Samsung anonymously, they said the counter would be an issue if I sent it in.
I came back home and tried doing the following, with the hopes of trying Triangle Away again:
1. Installed TWRP via ODIN and ran the restore on the backup I created in TWRP when I first got the phone. I restored everything including EFS. Phone boots to the stock samsung rom but it would restart automatically every few minutes. Even with Airplane mode on, it would still reboot on it's own.
The KIES error message doesn't appear anymore.
2. Went back to ODIN. It was getting stuck on SYSTEM in ODIN version 3.07 when flashing a stock rom. So I switched the USB port on my computer and used ODIN 3.04 then the flashes went through properly with no hang ups.
So I tried to flash a prerooted (http://forum.xda-developers.com/showthread.php?t=1975560&highlight=wind) stock ROM
and
also a basic stock ROM (http://forum.xda-developers.com/showthread.php?t=2061031), along with a stock recovery
Both just get stuck in a bootloop. I tried going to the stock recovery and wiping data, cache, factory reset several times. No luck - still boot loops. Wont go into the ROM.
I did not try "Re-partition" in ODIN. I'm not sure if that'll hard brick the device but maybe that way I can repair all of the partitions? - http://forum.xda-developers.com/showthread.php?t=860432&page=2
__________
Im hoping to get back into a prerooted ROM or stock ROM to try this Triangle Away Method - http://forum.xda-developers.com/showthread.php?t=2272966 to get the custom binary down to zero.
I tried to use the Triangle Away ODIN method but it doesnt go through in ODIN, it just gets stuck.
If I can get into the ROM without it boot looping or rebooting automatically- I think I can fix my IMEI like this person did - http://forum.xda-developers.com/showthread.php?t=2145967
Outcomes Im hoping for
To stop the bootlooping/ automatic reboots, then
1. To get the custom Binary count to 0 so I can send it back in for warranty to Samsung or my carrier, Wind Mobile. The binary says Samsung Official. - http://forum.xda-developers.com/showthread.php?t=2068156
or
2. To get the phone to working order so I can try this persons method - http://forum.xda-developers.com/showthread.php?t=2145967
The phone is still responding and it's still working with ODIN. It makes me think the issue is software or partition related and not hardware related per se. If it is hardware, I just want to get this phone back to Samsung but I need to unroot/clear the binary counter.
The phone has never been dropped or damaged physically. I've really babied the phone. This is my third Samsung Galaxy phone (I've had a Vibrant and S2x before this one.)
This has really ruined my week. I need my phone for work. I greatly appreciate any kind help or guidance. I know the collective genius here at XDA will be able to find a solution.
Thank you so much!
If you have flashed the tmobile modem you will now have to keep the tmobile one in order to get your phone to boot. Flashing a t889v modem will cause loops. Dont know of any way to get back to t889v modems.
Hey, don't worry, you aren't the first to experience this problem. Many users have reported that the T889V will bootloop with the T889V modem after flashing another modem. Many have also restored IMEI and service to their phones, so there is a solution. I don't have the specifics, but there are many threads about this problem with solutions. I have quickly searched for one and I believe it has everything you need to fix it.
http://forum.xda-developers.com/showthread.php?t=2119074&page=3
Byangmang said:
Hey, don't worry, you aren't the first to experience this problem. Many users have reported that the T889V will bootloop with the T889V modem after flashing another modem. Many have also restored IMEI and service to their phones, so there is a solution. I don't have the specifics, but there are many threads about this problem with solutions. I have quickly searched for one and I believe it has everything you need to fix it.
http://forum.xda-developers.com/showthread.php?t=2119074&page=3
Click to expand...
Click to collapse
Thank you. I'm going to give that a shot. I'll install CWM then install a T889 TMobile Radio to see if it boots.
I'll report back. Fingers crossed.
I had same issue... this is how I fixed it
http://forum.xda-developers.com/showthread.php?t=2274843
sniperess said:
I had same issue... this is how I fixed it
http://forum.xda-developers.com/showthread.php?t=2274843
Click to expand...
Click to collapse
Thank you all!
I got the boot loops to stop by flashing CWM recovery, then flashing a TMobile Radio.
From there, I followed the QPST instructions of installing a QCN file on the phone to reenable the AWS spectrum. Then I used the IMEI creator and NV Writer programs and I was back.
Data seems alright, getting alright speeds on Wind right now. I just found my bluetooth a little hard to hear in the car this morning.
So with this process, I should stick with a Tmobile radio from now on right? If I flash a Wind/ T889V modem it'll boot loop?
Have you guys noticed any signal or performance issues after restoring the phone this way? I'm wondering if it's worth the trouble to get the custom binary counter to clear and return this phone for warranty. Seems to be working for the most part so far.
Thank you so much again! I thought I was going to have to pay $100 to get it JTAGed.
Glad to here your back and running.
I have a t889v using it on telus, and since I am stuck on tmobile modem I get lower phone signal but never loose signal. On a plus I now get lte speeds.
First day back it seems good for the most part.
Only issue I had was Bluetooth in my car would cut out at a high rate of speed (when I was on the highway). It worked really well while I was on local roads but once I hit the highway I couldn't hear the other side at all pretty much. I had to put them on speaker to hear them. They could hear me really well, better than before when I was driving on local roads.
Never occurred in the past. Could it be a radio issue? Signal seemed okay and I was able to continue the conversation over the phone speaker on the highway.
lilroach said:
First day back it seems good for the most part.
Only issue I had was Bluetooth in my car would cut out at a high rate of speed (when I was on the highway). It worked really well while I was on local roads but once I hit the highway I couldn't hear the other side at all pretty much. I had to put them on speaker to hear them. They could hear me really well, better than before when I was driving on local roads.
Never occurred in the past. Could it be a radio issue? Signal seemed okay and I was able to continue the conversation over the phone speaker on the highway.
Click to expand...
Click to collapse
The bluetooth issue doesn't seem to be a problem anymore. Disappeared on it's own.
lilroach said:
The bluetooth issue doesn't seem to be a problem anymore. Disappeared on it's own.
Click to expand...
Click to collapse
I noticed I have serious data issues when the network goes into HSPA+ mode. I get really good data for a minute then it'll cut out totally for like an hour. I tried rebooting, tried battery pulling. It seems the T-Mobile radio doesn't interface well with Wind's HSPA+ . I had full bars but the internet wouldn't load. It was pretty non-functional for most of the day.
It works decently when it's not on HSPA+
Tried switching to a Wind modem, went into boot loops. Went back to T-Mobile radio. Should I try a different T-Mobile radio?
how to fix your T889v if you accidentally overwrite the radio
If you get stuck with no IMEI, in my case, flashed omnirom 4.4.1 t0ltetmo, which uses Tmobile radio... it killed the Wind Mobile radio... restoring form nandroid did not help.
solution:
flash omnirom t0lte (not t0ltetmo) and your problems are gone!
lilroach said:
I noticed I have serious data issues when the network goes into HSPA+ mode. I get really good data for a minute then it'll cut out totally for like an hour. I tried rebooting, tried battery pulling. It seems the T-Mobile radio doesn't interface well with Wind's HSPA+ . I had full bars but the internet wouldn't load. It was pretty non-functional for most of the day.
It works decently when it's not on HSPA+
Tried switching to a Wind modem, went into boot loops. Went back to T-Mobile radio. Should I try a different T-Mobile radio?
Click to expand...
Click to collapse

[Q] After installing CM10.2 - No Service but have IMEI

Hello Everyone. I've searched XDA and the net high and low trying to figure out what is going on here, but it has come time to post. Hopefully someone can point me in the right direction.
Bought my S3 from T-Mobile a few years ago, have installed a number of roms on it, but most recently updated to CM 10.2. I started having boot issues (phone would stop booting after a couple of restarts, not a sudden death syndrome phone, BTW). After using ODIN to load on root66-UVUEMJC (tmobile 4.3), and running into more issues, I ended up loading Stock 4.3 from Kies (yes, I realize this is a horrible mistake now).
That got me on my feet again, I used ODIN to install clockworkmod rom manager, then re-installed CM10.2. It was at this point where I noticed that I no longer had cellular network connectivity anymore. I've tried another t-mobile SIM in my phone to make sure it wasn't that, and it had the same problems:
On startup, my phone will connect to the cellular network and fill in all the fields under Status (including IMEI), but after a minute or so, I loose that and the device goes to "No Service". Nothing I've tried has been able to get this fixed. I have attempted to flash the latest modem as well with no luck.
As mentioned, any help would be greatly appreciated on what to look for / do to get this thing working so I don't have to drop a load on a new phone.
Thank you!

[Q] Help with note 2 flashed 4.1.1 jellybean stock rom ,cant connect to my carrier.!!

First off i just want to say sorry if this is in the wrong thread but this seemed like the best one.OK so yesterday night i wanted to record my screen on my new Note 2.So i downloaded some screen recording software and none of them worked i tryed for hours trying to fix it until i read online that most screen recording apps don't work with the latest android version 4.3 with knox.So i looked online and tryed to downgrade to 4.2.1 hearing that all screen recording works on 4.2 so i looked for my note 2 stock firmware with 4.2 not .4.3.I
When i flashed my rom i forgot the last step and i though it was bricked then i read the last step was just to factory reset so i did that and everything worked it booted up and did what it usually did.And then i noticed that i wasent getting signal which i though was normal considering i never get service at my house(metropcs...).Anyways my carrier is metropcs and then i looking in my baseband and it was different then the original!
This was my original: T889UVUCMK7
Now its this:T889UVALJ1
Now this my own idea but im no expert on android but i think i changed the baseband which effect the signal.At first i tryed to take out the sim and put it back in and it worked i got signal for like 30 signals..then it reverted to tmobile even though i dont have tmobile service.I would really appreciate it if anyone could help atm i am downloading the original stock rom 4.3.I am going to try to flash the stock firm ware with the MK7 base band using odin to my phone hopefully it will restore the base band to the original.
p.s:When i check my setting and look at mobile networks its APN is t mobile i tryed putting a metropcs apn but it dident work...
-sorry if this is kind of hard to understand since i am writing this stressed over this...

Unknown Baseband after flashing rom

Okay so i have the T-Mobile Galaxy s3. It has been rooted for a while with zero problems. I got tired of the older android on it and decided to install a rom. I installed Cyanogenmod 13.0-20151208-unofficial-d2tmo running android 6.0.1. When i first got it all booted and loaded with gapps, i noticed that it recognized my sim and that i had a signal but i couldn't use any LTE or just all around data. basically i couldn't go online (in case i just didn't explain that well enough. Phone service is a mystery to me). I did some searching online and found a lot of people saying that i needed to update my baseband. i found a baseband for my model (T999) and tried to flash it in TWRM. Once i rebooted, it said "No SIM card - No service." in the upper left-hand side. i have tried flashing multiple different basebands the same way with no luck. i tried backing up my EFS folder and the restoring it because someone said to do that and that just... just no... it didn't do anything. even Odin 3 said it was a "FAIL!". So here i am with this android equivalent to an Ipod and i hate this. Everything else in this ROM works perfectly aside from this but this is a super big problem. PLEASE HELP!!!! A phone isn't a phone if you cant even send a text.
Did you update the phone's bootloader and modem to the latest version before flashing CM?

Categories

Resources