[Q] How To install Rom? 4.0.4 MiX9 Modded v5 - LG Optimus Me P350

Hello Today I Root My LG Optimus P350 Me With (LG P350 Optimus Me Pecan Toolkit [ROOT])
So Whats Next I Want To Install [ROM][ICS-Based][4.0.4] MiX9 Modded v5 [Update] - xda-developers
I download that 105MB File But i am a bit confused how To recovery and wipe it?
So anyone help me Step by Step...

Okay, i'm assuming that you're with AmonRA Recovery. SO Let's begin ->
Turn Off your phone, and press the call button + end call button + vol. down all at the same time. You will see the Recovery Interface.
Go to Backup/Restore (to make a backup of your current rom) -> Nand Backup. Wait and when it's finished ->
Go to Wipe -> Wipe ALL Data/ Factory Reset. When it's finhised ->
Go to Flash zip menu (make sure the rom is on the SD card) -> Flash zip from SD card and then choose the ROM.
If appears -> Unsigned zip. Go to Flash zip Menu -> Toggle Signature Verification and do the previous step.
Reboot the phone; The first boot will be lagged as Hell. Wait the rom to settle itself and reboot it again.
Okay, you have now Mix9 Modded v5 on your Pecan! Enjoy =D

@ DarkRising Thanx A Lot i install MiX9 Modded v5
But language i not English?
can u tell me how to set english language..

Did you have installed gaps because i did and by me it's English

Related

[FAQ] Cyanogenmod 7 by Quarx

Thanks Quarx, Epsylon3 and maniacc103 for all your hard work in CM7.
** Always start the procedures with 80% - full charge (don't worry if your battery die during the process, you can still go mcgyver =)
** Make a backup of your apk's, There's a lot of programs to do that (File Explorer, AndroZip, AppMonster, etc.). If you want to backup your configurations too, use Titanium Backup.
** If you have any problem, don't blame CyanogenMod Team, Quarx, Epsylon3, the FAQ or whatever. This ROM works, if it's not working for you, it's mostly because you used wrong versions or are doing something wrong. For real bugs, use github **
ALWAYS USE THE RECOMMENDED VERSIONS
ESSENTIAL DOWNLOAD LINKS:
- RSD Lite and Motorola Drivers
- 3.4.2-179-2 CEE DEBLUR
- SuperOneClick 2.1
- http://www.defy-cm.net/tools/SndInitDefy_2.0.apk]Defy 2ndinit 2.0
- CyanogenMod 7.1
- Google Apps
1) What SBF version should I use when flashing CM7.1?
2) How can I install CM7.1?
3) How to update from/to nightly's?
4) My market is not downloading/installing any program. What to do?
5) Flashed CM7.1 (or any other ROM) now i'm stuck at Motorola or CyanogenMod logo. What I have to do?
6) Can I restore my phone to send it to warranty after flashing CM7.1?
7) How to install CM7.1 and keep downgrade-ability? (Froyo or Eclair)
8) Can't connect to my wireless network.
9) I love this ROM, how can I help Quarx and Epsylon?
10) How can I install Defy 2nd Init?
12) Gmail (or any other software) isn't available on market. How can I install it?
13) How can I make GPS work better (be more fast and precise)?
14) How can I install swype in CM7.1?
15) How to overclock/undervolt in CM7.1?
16) My GoogleMaps (or other application that uses OpenGL) is freezing/irresponsive. What can I do?
1) What SBF version should I use when flashing CM7.1?
- You can use whatever Froyo (2.2.x) you want. I'm actually using CEE 3.4.2-179-2 as a base, but you can use SEA or any other.
2) How can I install CM7.1?
- Copy update-cm-7.1.0-11-Defy-signed.zip and gapps-gb-20110828-signed.zip to your SD Card
- Enable USB Debugging
- Root via SuperOneClick
- Reboot
- Install 2ndInit Recovey, go to the app and click "Install 2ndInit Recovery" (use the latest version) button
- Disable USB Debugging
- Reboot, and in Bootmenu select Recovery -> [Custom Recovery] or [Latest Recovery]
- Select "wipe cache partition" then "wipe data/factory reset"
- Select "install zip from sdcard", "choose zip from sdcard", then select "update-cm-7.1.0-11-Defy-signed.zip"
- Select "choose zip from sdcard", then select "gapps-gb-20110828-signed.zip"
** You can install any other patches that you have now, like Swype or GPS Fix **
- Select "+++++Go Back++++++" then "reboot your system now"
** Sometimes, during the first boot after installation, the bootanimation doesn't stop. If you dont see anymore a led activity, remove your battery and reboot
3) How to update from/to nightly's?
- Copy update-cm-7.1.0-11-Defy-signed.zip (or the nightly), gapps-gb-20110828-signed.zip to your SD Card
- Reboot and go to Bootmenu (wait for led turn blue then press Volume Down). Enter Recovery -> Custom Recovery
- Select "wipe cache" then go to "advanced", select "wipe dalvik cache"
** If you have 100% battery, algo in advanced select "wipe battery stats" to calibrate your battery **
- Go back, select "install zip from sdcard", "choose zip from sdcard", then select "update-cm-7.1.0-11-Defy-signed.zip" (or the nightly)
- Select "choose zip from sdcard", then select "gapps-gb-20110828-signed.zip"
4) My market is not downloading/installing any program. What to do?
- Just log in Google Talk
5) Flashed CM7.1 (or any other ROM) now i'm stuck at Motorola or Cyanogen logo. What I have to do?
- Go to Custom Recovery then clear cache. If the problem persists, you can try to wipe dalvik cache (in advanced) too. The next boot will take some time to build dalvik cache again. If you don't have Custom Recovery for some reason, power off your phone, press and hold Volume Down + Power to go to Stock Recovery (only to clear cache/wipe data). Use Volume Up + Volume Down to show the options at Stock Recovery.
- Some people related freeze on the first boot of CM7.1, just remove your battery ans try again.
6) Can I restore my phone to send it to warranty after flashing CM7.1?
- You can in these two situations
1 - You have a full SBF of your original ROM (for carriers that already released 2.2 is very easy to find one)
2 - You have a nandroid backup AND a fixed SBF of the version you need.
For a list of (fixed) SBF's you can check:
SBF - Service Flash - all files + fixed sbf + Bootloaders
[[sbf:defy]] And Developers
7) How to install CM7.1 and keep downgrade-ability? (Froyo or Eclair)
If you don't flash the full SBF, your downgrade-ablility is fine.
Here's the safe steps to install CM7.1 and keep your downgrade-ability:
- Copy nandroid backup of 3.4.2-179-2 CEE to your sdcard. Uncompress it in the folder clockworkmod/backup/ of your sdcard, create this if needed.
- Enable USB Debug
- Root via SuperOneClick
- Disable USB Debugging
- Install Defy 2nd Init
- Reboot to enter Bootmenu, then go to Custom Recovery
- In Custom Recovery, go to "backup and restore", then "Backup". This will take some time, your backup will be at /clockworkmod/backup. Copy it to a safe place.
- Still in recovery, go to "backup and restore", "restore", and select the nandroid backup of 3.4.2-179-2 CEE (not your backup!)
If you have MD5 mismatch error, try to rename the folder of the nandroid to something simple without spaces, like "nand"
- Reboot your system and immediately press and hold Volume Up to enter Bootloader Mode (if you couldn't enter, remove the battery, wait 10s, put it again with Power and Volume Up pressed)
- Flash Fixed SBF of 3.4.2-179-2 CEE via RSD Lite
Now go to question 2 and do all the process to install CM7.1.
If you want to go back to your original ROM
- Disable USB Debuging
- Copy your nandroid backup to your SD Card, put it in /sdcard/clockworkmod/backup (must be a folder with simple name inside backup)
- Reboot phone in Bootmenu (Volume Down when the blue led lights at Motorola logo) then go to Custom Recovery
- Wipe data/factory reset, wipe cache and wipe dalvik cache (in advanced)
- Choose "backup and restore", "restore", and select your eclair nandroid backup. If your backup doesn't show in this screen, is most likely you placed it in the wrong folder.
- Reboot your system and immediately press and hold Volume Up to enter Bootloader Mode.
6. Flash the Fixed SBF of your original ROM. For a list of (fixed) SBF's you can check:
SBF - Service Flash - all files + fixed sbf + Bootloaders
[[sbf:defy]] And Developers
8) Can't connect to my wireless network.
- Tap and hold the SSID of the network and select Forget. Try to configure the SSID again.
9) I love this ROM, how can I help Quarx and Epsylon?
Donate to Quarx
Moneybookers: [email protected]
WebMoney: USD:Z319203344726
Yandex money: 4100188263979
Click to expand...
Click to collapse
And donate to Epsylon3 (tpruvot)
PayPal: [email protected]
http://forum.xda-developers.com/donatetome.php?u=803131
Click to expand...
Click to collapse
10) How can I install Defy 2nd Init?
http://www.defy-cm.net/tools/SndInitDefy_2.0.apk
11) Gmail (or any other software) isn't available on market. How can I install it?
- Download MarketEnabler via Market
- Select US Provider (T-Mobile)
- Open Market and search for Gmail or any other software, it will be available now
- Don't forget to select your correct Baseband in Applications => Defy Baseband Switcher
12) How can I make GPS work better?
- Make a backup of your /etc/gps.conf (use a file manager to rename or copy to another place)
- Visit this thread
- Click in the link "XDA Members Click Here" at the final of the post, and search for the correct .zip for your country
- Copy the .zip to your SD Card and reboot in Bootmenu, then flash the zip via Custom Recovery
13) How can I install swype in CM7.1?
- Go to http://beta.swype.com, (create a account if needed), download the Swype Beta and install it
- Open Applications -> Swype Installer and follow the instructions on the screen
14) How to overclock/undervolt in CM7.1?
CM7.1 already comes with 1000/600/300 clock, but if you want to modify these settings or undervolt:
- Reboot and enter Bootmenu
- System -> Overclock
- Set your parameters and select [save] before exit.
Remember that if you experience freezes, reboots and other problems, OC/UV can be the cause. Try to disable in this situation.
Also, DON'T INSTALL SETVSEL!
15) My GoogleMaps (or other application that uses OpenGL) is freezing/irresponsive. What can I do?
Open terminal or adb shell and type these commands:
Code:
$ su
# mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
# echo sysctl -w vm.min_free_kbytes=4096 >> /system/etc/install-recovery.sh
# chmod 744 /system/etc/install-recovery.sh
# mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
I'm a newbie, so any help to complete this FAQ will be welcome =)
And sorry for my english =S
Thanks to everyone that helped me in this FAQ, sending suggestions and fixes.
Thx for the post.
this is awesome. I should give u credit.
Sent from my MB525 using XDA App
nice... quarx thread should be more focus about bug reporting..
The kernl of CM7 in Quarx's is Nordic , mean 3.4.2-177.5 not 3.4.3
3) How to update from Beta 4.0/4.1?
- Copy Fix.zip, CM7 and Google Apps to your SD Card.
- Reboot your Defy then go to Bootmenu (blue light at Motorola logo) then Custom Recovery
- There's no need to wipe data/cache!
- Select "install zip from sdcard", "choose zip from sdcard", then select "Fix.zip"
- Select "choose zip from sdcard", then select "update-beta5-cm7.1.0-03.05.11-Defy.zip"
- Select "choose zip from sdcard", then select "gapps gb 20110503 signed.zip"
- Select "+++++Go Back++++++" then "reboot your system now"
Click to expand...
Click to collapse
I think, after flashhing fix.zip need a reboot:
Quarx said:
Update to Beta5:
Before update you need install fix.zip and after reboot you can flash new version.
If you do not, then you get an error when installing the new version. And you will need to reflash with RSD.
Click to expand...
Click to collapse
Yes please change that. After flashing Fix.zip a reboot is absolutely necessary.
i created tutorial to install CM7 and keep the downgrade-ability to eclair.
in here: http://forum.xda-developers.com/showpost.php?p=13527057&postcount=3
maybe you can create that tutorial too in this thread.
I think we should better start a wiki that way everybody can contribute
Can we create pages on the XDA Wiki? Dunno how to but I think that's easier for everyone!
we have a wiki here:
http://forum.xda-developers.com/wiki/index.php?title=Motorola_Defy
I once made a comparison between 3.4.3_11 and 3.4.2_177, hope this can answer someone's question about the sbf.
http://forum.xda-developers.com/showpost.php?p=13244959&postcount=1806
Solution for (most of) not-connecting wifi
http://forum.xda-developers.com/showpost.php?p=13435452&postcount=2355
I'm on the US official Froyo() currently, and since the aGPS has been fixed, I'm planning to go for the CM7 made by Quarx.
Before I do, I've got a little concern. If I follow the normal procedures to flash CM7, am I able to go back to the Official Froyo I currently use? I ask because there is no SBF for this official US Froyo, there is only leaked version and the OTA.
you tuto is perfect , but the gapps has a new version , try update
boa mlk exelente topicuuu mas tu viu q o gapps ta velho saiu uma nova esse mes com o app do 2.3.4 se quiser o link pede
wyxpark said:
I'm on the US official Froyo() currently, and since the aGPS has been fixed, I'm planning to go for the CM7 made by Quarx.
Before I do, I've got a little concern. If I follow the normal procedures to flash CM7, am I able to go back to the Official Froyo I currently use? I ask because there is no SBF for this official US Froyo, there is only leaked version and the OTA.
Click to expand...
Click to collapse
Item 7 of the FAQ. You will only need a fixed SBF version that matches the number of your original ROM, there`s no need to be the same ROM. These parameters will be overrided by the parameters in your nandroid backup (version and name of your original Froyo).
FAQ Updated to Beta 5.1 (thanks Quarx!) and 2nd Init Recovery Installer 1.4 (thanks pedrodh!)
is defy bootloader unlocked?
why it can flash cm7
ygvuhb said:
is defy bootloader unlocked?
why it can flash cm7
Click to expand...
Click to collapse
using 2nd Init Recovery, so nothing to do with locked bootloader
@antony.ps : nice tutorial
One question: How do I install Custom Recovery / Clockworkmod?!!
I am trying to do step 7 but I am stuck I am unable to install Bootmenu+Clockworkmod that Quarx provided. If I use Root Explorer to install, it will not install as after reboot I don't see the System Recovery app; I have tried installing via emulator as well but same result. (I dunno which folder to extract the files to. I have even copied to the root folder and the install.sh seemed to execute but after restart it dint work and weirdly the copied folder also vanished!)
I, however, managed to take a nandroid backup of my system using DEFY SD-Recovery. However, if I try to restore the "nandroid backup of 3.4.2-177" I get md5 mismatch and the process aborts NOTE: I cannot move folders if I use this app; so instead of clockworkmod/backup/ I have to use goapkrev/backup
I am unable to proceed unless I perform the restore. Can someone help me with step-by-step solution for installing Clockworkmod Recovery, and also 2nd Init / Bootmenu as that is needed for the next step? Thanks!
candra_aja said:
using 2nd Init Recovery, so nothing to do with locked bootloader
@antony.ps : nice tutorial
Click to expand...
Click to collapse
Since we're in the FAQ-topic here can you or someone else give a little explanation what 2nd Init actually does? I'm guessing it sort of circumvents some limitations by the bootloader.
abhi.eternal said:
However, if I try to restore the "nandroid backup of 3.4.2-177" I get md5 mismatch and the process aborts
Click to expand...
Click to collapse
This has been mentioned already about 1000 times by now on this forum but the simple solution is to remove all the spaces from the folder name. Easiest is to use short simple folder names such as "nand" or something else that makes sense to you.
AgentSmith said:
Since we're in the FAQ-topic here can you or someone else give a little explanation what 2nd Init actually does? I'm guessing it sort of circumvents some limitations by the bootloader.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=12837303&postcount=1
candra_aja said:
using 2nd Init Recovery, so nothing to do with locked bootloader
@antony.ps : nice tutorial
Click to expand...
Click to collapse
Can all moto locked bootloader phone use 2nd recovery ?

[Q] Will CWM alpha work for creeds ROM v 2.0?

I need help with the CWM ty
I am not sure but I guess recovery is not dependent on ROM..
btw.. use Skin's CWM recovery from that thread..
Could u give me the link, coz the one i dloaded from the thread did not work,
i am getting, error in boot image'
i dont know if its the CWM problem
yes its work!!!
cek this out: here
I have this CWM, this is the one iam using
Iam going to install the ROM
Plz help me if i have a problem
TY
I did it this way:
1. Download the rom and the CWM by SKIN1980(You can find it in the Samsung galaxy y development, at the bottom)
2. Put it in ur sdcard(on the root of sdcard)
3. Boot into recovery. Hold Vol. UP+Home button+Power button.
4. Wipe data/reset
5. install zip from sdcard then choose CWM by SKIN1980.zip
6. Backup your rom(incase of problems)to do this: Backup and Restore -> Backup.
7. Install zip from sdcard then choose the Creeds rom v2.0.zip
8. Wait for the Rom to be finished.
9. After installing, Reboot system now.
10. Enjoy the rom,
/IGKG2L5RAF here is the link of skin's cwm. PUT IT ON MULTIUPLOAD DOT COM. JUST ADD IT ON THE ADDRESS BAR.
ty il post how it went in a while
thank you very much

ICS ROMS(Includes All ICS ROMS)/MODS FOR DEFY/DEFY+

CM9/ICS Ad-Hoc fix(WORKS ONLY FOR WINDOWS USERS): http://forum.xda-developers.com/showthread.php?t=1612454
ROOTING DEFY/DEFY+: http://forum.xda-developers.com/showthread.php?t=1614651
Is your DEFY/DEFY+ bricked??(UNBRICKING DEFY/DEFY+): http://forum.xda-developers.com/showthread.php?t=1618718
JIUI v4(MIUI v4) & JWP7(Windows Phone 7 MOD): http://forum.xda-developers.com/showthread.php?p=26890050#post26890050
DEFY/DEFY+ ICS BUILDS
Note: Please visit ORIGINAL THREAD for latest versions. I am trying my best to keep it up to date
- JIUI JB(MIUI JB) See here
-CM9
-JIUI v4(MIUI v4 Port)
-JWP7(Windows Phone 7 Mod)
-WIUI
-Codename Android 1.6.0
-IMM76I 4.0.4 AOKP
-CM9 kangs by FuZZ_
-[MOD Collection][CM9]All in One package v1.65 by Pottkopp
MODS:
CyanogenMod 9 UI Enhancements | All phones Thread Tools: http://forum.xda-developers.com/showthread.php?t=1531222
V6 Supercharger: http://forum.xda-developers.com/showthread.php?t=1531222
JIUI v4​
About JIUI v4
- Based on Epsylon 13/06/2012 and Quarx 08/03/2012
- Very Smooth
- Camera Works
- Updated drivers
- Updated Recovery(TWRP(Complete touch recovery))
Known Issues:
- Obviously wifi tether doesn't work
- FM Radio doesn't work
Original Thread: http://forum.xda-developers.com/showthread.php?t=1687856
Flashing Instructions:
1.Wipe data/factory Reset, wipe cache, wipe dalvik cache.
2.Flash JIUI v4
3.Reboot. First boot takes along time, be patient.
4.After boot, you might find it a bit lag. This happens. After first boot is complete, use it for 5 minutes and reboot it. Your lag issue will be solved
JWP7​
About JWP7
JWP7 is rom with few added apps to make it look like Windows Phone, also few tweaks are added to increase battery life. Try it, you will like it.
About JWP7(GB Stable) Also ICS version available
- Based on MIUI
- Added few applications to make it look like WP7
- Added few CPU tweaks
- Added 4-way Reboot Mod
- Added MIUI Extended Settings
- Added TWRP recovery
- V6 supercharged.
- Added WP7 style keyboard with SWIPE and lots more!!!!!!
DOWNLOAD LINKS:
Original Thread: http://forum.xda-developers.com/showthread.php?t=1687856
Flashing Instructions: (Same for all versions)
1. If you are on CWM, download and flash TWRP Recovery via CWM.
2. Reboot and enter into CWM. Mount your SDCARD(TOOLS->Share SDCARD).
3. In SDCARD you will find a folder called TWRP, open it and copy the JWP7 into TWRP->BACKUPS->0000000000 folder.
4. Now select TOOLS->Stop Usb Share.
5. Select Recovery->Stable Recovery->Wipe. Wipe Cache, Dalvik Cache, Factory Reset. Once done go back to previous menu.
6. Select Restore and now select JWP7. Restore it and go back to previous menu. Reboot->System. (Note: Don't wipe anything after selecting restore because everything is pre-configured)
CM9​
Thanks to QUARX and EPSYLON. It will easy for them to track bugs, if you guys use the thread below to report your bugs
CM9 Bug Tracking: http://forum.xda-developers.com/showthread.php?p=25458293#post25458293
Epsylon' original thread: http://forum.xda-developers.com/showthread.php?t=1353003 You can visit here for change log and related queries
Quarx thread: http://forum.xda-developers.com/showthread.php?t=1595898 You can visit here for change log and related queries
To make things easier, DEFY guys use the one in green and DEFY+/DEFY(RED LENS) use the one in RED
ROM LIST(Contains Links to CM9 All Builds)
Defy Green Lens Only
Defy CM9 nighties by Epsylon(Defy Green Lens Only): http://defy.wdscript.fr/defy-cm9/
Defy CM9 nighties by quarx2k(Defy Green Lens Only): http://quarx2k.ru/cm9-nightly-defy/
Defy RED Lens And Defy+
Defy CM9 nighties by quarx2k(Defy RED Lens And Defy+): http://quarx2k.ru/cm9-nightly-defy+/
Defy CM9 nighties by Epsylon(Defy RED Lens And Defy+): http://defy.wdscript.fr/defyplus-cm9/
Battery FIX for Defy Red Lense: http://www.4shared.com/zip/UR1QUISz/...ttery_Fix.html
GOOGLE APPS FOR CM9: http://goo.im/gapps/gapps-ics-20120317-signed.zip
YOU HAVE TO FLASH THIS KERNEL FOR CM9
Defy(GREEN LENS) Froyo kernel: http://m.cfa.aero/misc/CM7_Kernel-signed.zip
Defy(RED LENS) GB Kernel: http://m.cfa.aero/misc/CM9_Kernel-signed.zip
DEFY+ users don't flash any kernels.
FLASHING INSTRUCTIONS
Put the CM9 zip and google apps and kernel in case of DEFY(Red Lens)
Upgrading from Any version of ANDROID to CM9
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
Upgrading from CM7 to CM9 follow these steps
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
Upgrading from CM9 to new version of any CM9 follow these steps
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
Codename Android​
Codename Android is a fully open source rom that focuses on speed, usability, and getting every feature that we can get CRAMMED in there .
Our mission is to spread the Open Source Android love to as many people as possible, and get as many people involved as possible. Please visit the original thread it has lot of stuff. You will LOVE IT.
ORIGINAL THREAD:http://forum.xda-developers.com/showthread.php?t=1585905
Latest Version: http://www.wuala.com/Sesme/Android/AOSP/Codename-Android-(MOD)-1.6.0-DFY.zip/
FLASHING INSTRUCTIONS
BACKUP your APPS. Put the zip in SDCARD.
1. Make a backup
2. wipe data/factory,wipe cache, wipe dalvik cache reset in recovery
3. flash the rom
4. reboot
5. sign in(You don't have to flash GAPPS)
6. wait for the phone to restore all your apps
7. reboot
WIUI(ONLY FOR DEFY)​
Thanks to Wajk for doing a tremendous job. I am adding this to thread because this ROM is excellent.His rom are known as WIUI, its based on MIUI so don't get confused.
Note:ICS Rom by Wajk is based on CM9, so you might find the same bugs found in CM9 but UI is based on MIUI. If you want to change everything according to your wish, you can do it with this ROM. CM9 is no where near when it comes to customizing
Original Thread:http://forum.xda-developers.com/showthread.php?t=1161110
FLASHING INSTRUCTIONS
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery.
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Once installation is complete, navigate back and select REBOOT.
5.First boot will take a long time. Be patient.
IMM76I 4.0.4 AOKP​
Original Thread: http://forum.xda-developers.com/showthread.php?t=1585425
Latest build: Milestonte 5 beta 8: http://www.mediafire.com/?3css0qddwd9dl7d
aokp build 28: http://www.wuala.com/Sesme/Android/MIUI/AOPK/aopk-jordan-build28.zip/
Gapps: http://goo.im/gapps
FLASHING INSTRUCTIONS
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery.
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Once installation is complete, navigate back and select REBOOT.
5.First boot will take a long time. Be patient.
CM9 kangs by FuZZ_​
Source: http://forum.xda-developers.com/showthread.php?t=1673116
DEFY: http://fitsnugly.euroskank.com/skankwich/?id=jordan
DEFY+: http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
Flashing Instructions:
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
[MOD Collection][CM9]All in One package v1.65 by Pottkopp​
Download Link: http://dl.dropbox.com/u/66678754/Android/AiO/AiO-aroma_v1.65.zip
Original Thread: http://forum.xda-developers.com/showthread.php?t=1535540
Flashing Instructions:
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
MAKING A NANDROID BACKUP:​
- In the CLOCKWORK MOD recovery, choose Recovery->Stable or Custom Recovery->Backup and Restore->Backup(all).
- Once Backup is complete you can continue your process. NOTE: Use vol+ and vol- and power button to navigate back.
Queries Are Welcomed
​IF THIS THREAD WAS USEFUL, PLEASE RATE IT.
ANY BROKEN LINKS, PLEASE REPORT.
Old one is closed so people can use this New thread ..Good Work
Nice one -_-
Edit : OK this is helpful
Sent from my MB525 using XDA
Well this thread was made by a fan of adimotion
Enviado desde mi MB526 usando Tapatalk
GUYS, GUYS solve it down all right. If a new user wants to flash CM9 he won't know anything about Epslyon or Quark builds and finding links is not that easy. So everyone end up with adi4motion thread which was very useful as you can find everything there, no need to search for any needed stuff. Its not that he was taking credit from either of DEV's neither i do. Just making things easier for users who want to try CM9 and that's just it. No offence. Just trying to help users.
Hai,
I've got a question about the battery life. Could it be that it is a lot shorter now i'm using cm9 than when i was on cm7? I could do a hole day, from evening to evening, but now sometimes i have to charge 2 times a day! I have battery fix installed on my red lens defy.
egmruigrok said:
Hai,
I've got a question about the battery life. Could it be that it is a lot shorter now i'm using cm9 than when i was on cm7? I could do a hole day, from evening to evening, but now sometimes i have to charge 2 times a day! I have battery fix installed on my red lens defy.
Click to expand...
Click to collapse
Try using CPU tuner from market also use V6 supercharger. You will find a huge difference and don't use any task killer.
Changelog?
Hey,
I was wondering if you could include a changelog in the 1st post? It'll be useful in case anybody didn't want to update everytime a new version came out.
Thanks!
Motorola Defy running CM7.2 RC2
Columban said:
Hey,
I was wondering if you could include a changelog in the 1st post? It'll be useful in case anybody didn't want to update everytime a new version came out.
Thanks!
Motorola Defy running CM7.2 RC2
Click to expand...
Click to collapse
ya would love to do that. but i can't do that because it makes bug tracking harder this is why they closed adi4motion thread. So you want, visit the original thread and ask the builder. If it was WIUI i can say but not for CM9 builds. I will try my best to post the change log. Have to ask people before doing anything like that.
This might help a few users but wasn't needed..
Even Multiple threads about same information makes stuff confusing sometimes..
Doesn't matter from where I send it, what matters is written above
neo.ank said:
This might help a few users but wasn't needed..
Even Multiple threads about same information makes stuff confusing sometimes..
Doesn't matter from where I send it, what matters is written above
Click to expand...
Click to collapse
It is never about CM9. Its about all ICS ROM and strictly no bug reports. I don't want to confuse users.
Columban said:
Hey,
I was wondering if you could include a changelog in the 1st post? It'll be useful in case anybody didn't want to update everytime a new version came out.
Thanks!
Motorola Defy running CM7.2 RC2
Click to expand...
Click to collapse
Change log included temporarily
Thanks! I'll visit the original post and ask regarding changelog
Sent from my MB525 using Tapatalk
Columban said:
Thanks! I'll visit the original post and ask regarding changelog
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Its been added here. In the first thread itself
Isn't the latest AOKP the milestone 5 beta 8?
Sent from my MB525 using XDA
NI55AN said:
Isn't the latest AOKP the milestone 5 beta 8?
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Link added.
I know you've got a long op already but maybe it would be good to add links the various mods available to ics roms like ics reloaded and v6 supercharger.
Edit: http://forum.xda-developers.com/showthread.php?t=1535540 (CM9 all-in-one package)
http://forum.xda-developers.com/showthread.php?t=1531222 (reloaded ICS)
http://forum.xda-developers.com/showthread.php?t=991276 (v6 supercharger, 2nd post has ICS information.)
Sent from my MB525 using XDA
NI55AN said:
I know you've got a long op already but maybe it would be good to add links the various mods available to ics roms like ics reloaded and v6 supercharger.
Edit: http://forum.xda-developers.com/showthread.php?t=1535540 (CM9 all-in-one package)
http://forum.xda-developers.com/showthread.php?t=1531222 (reloaded ICS)
http://forum.xda-developers.com/showthread.php?t=991276 (v6 supercharger, 2nd post has ICS information.)
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Links will be added for sure. thanks for your suggestion.
Forgot this flash video fix for 19/5/12 epsylon defy build.
http://forum.xda-developers.com/attachment.php?attachmentid=1068736&d=1337349712
Originally posted by ShurikKb
Thread: http://forum.xda-developers.com/showthread.php?p=26254762
Sent from my MB525 using XDA
I'd consider something a little more subtle.. color wise.
The start post and your signature make my eyes hurt.

[Q] Xperia Arc Issue

Hi guys, I have recently loaded UHD 3.0.2 onto my Sony Ericcson Xperia Arc, but when trying to complete the last step below, my phone wont enter CWM. The phone isn't in a boot loop but the Wifi isnt working and I do have the modules on my SD card.
C. Install custom rom
========================
. Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
Please Help!!
Ejazr said:
Hi guys, I have recently loaded UHD 3.0.2 onto my Sony Ericcson Xperia Arc, but when trying to complete the last step below, my phone wont enter CWM. The phone isn't in a boot loop but the Wifi isnt working and I do have the modules on my SD card.
C. Install custom rom
========================
. Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
Please Help!!
Click to expand...
Click to collapse
Hi Ejazr,
When you finish with aroma press the back key, then select advanced (the last option, in the bottom), and there you'll find the option reboot recovery, select it, then follow with the wifi modules etc.
Good luck.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
BajoPrimate said:
Hi Ejazr,
When you finish with aroma press the back key, then select advanced (the last option, in the bottom), and there you'll find the option reboot recovery, select it, then follow with the wifi modules etc.
Good luck.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
Click to expand...
Click to collapse
Hi BajoPrimate,
Thank you for your quick reply I really appreciate it!, I am very very new to this, but what I try to do to enter the CWM mode is shutdown the phone, turn it back on while pressing the down volume button, but it doesn't seem to do anything, it just boots into the normal phone screen, Please help as I desperately need to resolve the issue with my Wi-Fi not authenticating.
Ejazr said:
Hi BajoPrimate,
Thank you for your quick reply I really appreciate it!, I am very very new to this, but what I try to do to enter the CWM mode is shutdown the phone, turn it back on while pressing the down volume button, but it doesn't seem to do anything, it just boots into the normal phone screen, Please help as I desperately need to resolve the issue with my Wi-Fi not authenticating.
Click to expand...
Click to collapse
Hi Ejazr, try another key, in my brother's phone it's the back key, but it could be another, reboot and try eventually you'll get it.
Edited : my brother says that with this room he uses volumen down key also, so I don't know, perhaps you could try installing x-parts from the market, but be careful, I'm not sure now. Sorry and good luck.
Good luck, and you're welcome.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
Well, just Flash the .587 ftf . and then flash the kernel, and then install ROM from CWM. It should work if your did this procedural properly.
Wish the best . :good:

Problem android.system.mui interrupted in rom ace2Nutzer

Hello guys, I need some advice ...
I have an ace with two previously a CM11, I proceeded through odin restore with original ROM JB (I8160XXNA1_I8160ITVNA1_HOME.tar) and then, once combed the new rom I proceeded to install the new rom and kernel Ace2Nutzer with this procedure:
Wipe Cache + wipe data / factory reset
Go advanced
wipe Dalvik cache
go back
install zip from sdcard
install zip from sdcard1
..then I selected the rom Ace2Nutzer (cm ROM: 20150714) and installed
..then I selected the patch Patch1 (for CM11: 20,150,714) and installed
..then I selected the gappps (HDPI_mini-gapps-kk-20150617-signed) and instllata
..then I selected kernel (latest ver 20151130) and installed
..then I selected parameters NovaThor (NovaThor Settings v1.6.6) and installed
go back and reboot system ..
At this point I figured all the phone ...
The rom is very good and congratulations for the work, but I have a problem; a low battery desktop nova flashes without background and then opens a window that says: android.system.mui the process was interrupted and I'm forced to turn off power button and put them in charge as the phone is not responding to commands
Someone kindly help me? I do not have practical installations rom, I run the right procedure of installing the kernel and rom?
Thank you
Anyone with this problem even on other rom?

Categories

Resources