So I just purchased my second Jabra Wave thinking I had a problem with the first one. I can connect my Captivate Glide with Android 4.0.4 version I927UCLJ3. It pairs and does work with a phone call however, the "A2DP" doesn't seam to work or I cannot find the correct place for settings. I want to stream my audio out to my mono Jabra Wave Bluetooth from music and things like my Pandora. I know both of the Jabra Wave headsets now do support it by using my wifes phone, pairing them and they play audio just fine and they both listed and both Jabra Wave part numbers I have say they support A2DP but no where in the phones menu settings can I find how to send the "music" audio to the bluetooth. I was also hoping the bluetooth mic would be able to be used for my voice to text engine. Has anyone gotten their audio routed to a mono bluetooth and if so, how did you send the audio to it?
Related
hi everyone. is it possible to listen to my windows media palyer mp3 and other audio in a bluetooth headset? i bought a BT headset and got it to wotrk on my xda2 for incoming and outgoing calls...but when i listen to my audio in windows mobile, the sound still comes out of the xda2...
i hope you guys have something for this...
thanks.
I have a PPC-6601 with the same issue. The platform apparently does not support "audio on demand" over bluetooth. There may be 3rd party software or a bluetooth stack tweak that fixes this but as of yet I have not found one. If it exists it is probably on this site, but I'm still searching.
Hopefully someone will post a fix.
This also causes voicecommand to not work over the bluetooth, which means that a wired headset is far superior to a bluetooth one on these phones. Hopefully it is not a hardware limitation.
good luck to us.
Wes
Its not a limitation... but the device should support AD2P profile... which is not still in there.. will will have to wait for it
Hey guys,
check out PDA2K_BroadcomCorp_BTUpdate.cab on this forum:
http://forum.xda-developers.com/viewtopic.php?t=14329
I believe this adds the AD2P and keyboard profiles to the phone. When I installed it on mine I saw a new profile for bluetooth high quality audio headphones. Unfortunately my bluetooth headset (Logitech mobile freedom) doesn't seem to support AD2P. I was hoping to get low quality audio on demand through the headset, not necessarily high quality audio. My goal is to get microsoft voice command to work over the bluetooth headset speaker and mic.
Let me know if you have any ideas for getting audio on demand over my bluetooth headset, and if you have a good set of bluetooth headphones that support AD2P, the file at the link above should get it working if you have the broadcomm/widcomm bluetooth stack.
Thanks for the link
Thanks for the link, will have to search for the update for PDA2k....
pda2k update
that file should work on any pda using the broadcomm bluetooth stack. it adds the high quality audio profile and keyboard profile.
i am looking for a way to get a headset profile to behave exactly like a wired headset. apparently this is not an option.
Is anyone using either Sony Ericsson HBH-DS970 or Nokia Wireless Stereo Headset HS-12W with Artemis? If so, how's the audio quality? Do you need to install extra software? Do all the buttons work? And do track titles show on the display?
Thanks!
Rick
rickgillyon said:
Is anyone using either Sony Ericsson HBH-DS970 or Nokia Wireless Stereo Headset HS-12W with Artemis? If so, how's the audio quality? Do you need to install extra software? Do all the buttons work? And do track titles show on the display?
Thanks!
Rick
Click to expand...
Click to collapse
i use Sony Ericsson HBH-DS970 - it's greate. use windows media for playing music. All work fine. All buttons work. But one thing - when i use it and have incoming call - music start play in headset
I have same problem I hope to find a plug to fix this. If you already have, Please let me know too. thanks in advance!
TomKlan said:
I have same problem I hope to find a plug to fix this. If you already have, Please let me know too. thanks in advance!
Click to expand...
Click to collapse
in bt settings -> tab devices -> tap on headset -> select edit -> uncheck Wireless stereo
when you need to play music turn on this option again...
Spasibo za msg
Problems Solved
I just recently got my P3300 and a nice Sony Ericsson HBH-DS970. I had a lot of problems with the original Windows Mobile 5 at first. It recognized the unit as a2dp and I set the P3300 tu use a2dp functionality of the sony headphones. NADA! Nothing happened. I could just use it as regular hands-free. Then I found this site and first upgraded mu ROM to
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.rar
I didn't like it because it was for Asian market, no localization etc. and some problems...
Then upgraded to
Tom_ART_v2.00.02_CB.rar
Brilliant!!!! Looks like WM6 and has a lot of new functionality +
working A2DP profile. Now the Sony Ericsson HBH-DS970 is working 100%. No bugs, no music while ringing or other problems. Just perfect!
The only disapointment - There is no Radio! In order to run the radio you must use the original hands-free. they say it is because it uses the wire as antena. I tried to hook both the Sony Ericsson HBH-DS970 and the original hands-free -> the sound coming only from the original. SORRY.
I read somewhere that the Nokia model has a built in Radio. So if you need the Radio go for the Nokia one. Though they say the sound from the Sony Ericsson HBH-DS970 is way better! If you prefer MP3's with better sound go for the Sony.
Hope this helps.
i use the nokia hs 12w and the sound quality is excellent.
Do you guys have enabled or disabled the registrykey "UseJointStereo"?
I'm using the HTC BHS100 Bluetooth together with a V-Moda Vibe. When I enable this key (value set to 1) I have superior sound quality but in jointstereo. When I disable this key (value set to 0) to achieve real stereo sound I hear a high pitch noise and the sound is far from superior but in real stereo. This really anoise (typo?) me alot and it doesn't matter whether I'm using the original earphones that comes with the bluetooth or the v-moda earphones or even my full sized dj headphones.
All in all i'm just looking for a wired solution to get the superior stereo sound but that is a problem too. Because a mini-usb to 3.5mm adapter doesn't disable the built-in speaker when listening to music (using an HTC Y cable)
...Because a mini-usb to 3.5mm adapter doesn't disable the built-in speaker when listening to music (using an HTC Y cable)...
Click to expand...
Click to collapse
Have you tried this update: http://www.europe.htc.com/support/software/htcp3300.html
HTC:
"HTC audio Drivers
Downloading and installing this driver update will provide your HTC mobile device with the latest available optimised software for use with the following accessories:
YC A120 Y-Cable adaptor
RC W100 Remote Controller
RC E100 Remote Controller"
Tried it just now but I get the message that I already have the latest drivers installed and then it ends the installation.
I'll try to put back the original rom and then install the driver to see if it makes any difference. That is if I'm able to put it back somehow (extended rom has original rom but hardreset still installs the modified rom).
Finally...after installing WM6, the device recognise the Y cable as a headset (registry automatically change value into 1) and now I can enjoy music in full stereo quality. WHOOHOO
Hi,
Is there any way to set the bluetooth stereo headset connection to default stereo? sorry about my english.
so If i connect may stereo headset to the phone the defaul is mono headset i have to go to bt settings and change the profile to stereo after that working fine, I can handle incoming calls etc. but I have to change the profile after reconection again. If I uncheck the headset and handsfree profiles then the stereo working fine but i cant handle the incoming calls from the haedset only with the phone.
so is there a solution to keep the default profile stereo and keep the other two profil in live?
it tries to you works in stereo
Quick question for anyone with a BT stereo headset - if i get a BT dongle, could i connect the headset to a PC and get voice comms via teamspeak to work? Assuming that the dongle and headset does all the A2DP and other profiles?
Basically I'm just trying to see if its feasible - It'd be nice to use the headset for music with the phone, then use it as a wireless headset for games and voice comms when at home.
Furbious said:
Quick question for anyone with a BT stereo headset - if i get a BT dongle, could i connect the headset to a PC and get voice comms via teamspeak to work?
Click to expand...
Click to collapse
Yes, and with VOIP & MSN etc. too. The headset appears in the audio properties box on windows or the app you are running.
Thanks -
Before i go and splash out on one - can you confirm a headset that will deliver quality stereo while using the mic
Virtually everywhere i've been, they say that as soon as you use the mic, it will drop down to 8khz mono for sound as it switches from A2DP to the headset one.
If you or anyone have a BT stereo headset, is there any chance you can play a normal 3D game and see if you can talk over teamspeak without it dropping to mono?
Furbious said:
Quick question for anyone with a BT stereo headset - if i get a BT dongle, could i connect the headset to a PC and get voice comms via teamspeak to work? Assuming that the dongle and headset does all the A2DP and other profiles?
Basically I'm just trying to see if its feasible - It'd be nice to use the headset for music with the phone, then use it as a wireless headset for games and voice comms when at home.
Click to expand...
Click to collapse
I think u need to get headset with multipoint headset if u want keep in live the phone and the PC connection same time. like jabra BT8010 or BT320s.
I use Jabra 5020 (mono) and working fine for Voip and Phone same time.
So I have a 8525, very new to it. I am using sleuths latest WM6 ROM. I paired my plantronics bluetooth handsfree which supports both profiles "handsfree and headset" it paired as handsfree and works for calls as expected. But I have yet to figure out a way to pipe all audio to the headset or pair it as a headset. I can pair it as a headset on a PC, but not the 8525. I remember having this issue with my 2125 and having to get some software to allow this, I assumed with all the stereo bluetooth work and that this was a pocket pc and not a smartphone that this was not an issue any more.
I tried searching but so many posts come up for bluetooth headset or handsfree, not having much luck.
Which headset are you using?
I have the plantronics voyager 510, works fine as the handsfree with the phone and sleauth wm6 rom. Just trying to figure out the way to get the headset side to work so I can listen to audio books and podcasts.
I will keep searching, keywords get me results just going to have to keep sifting.
You need a headset with AD2P profile or your gonna need to get some hack to route all bt audio to a mono headset.
Is there such a hack? I have the Plantronics 520 bt headset which works really well with voice, but won't play any music. I've tried all the various cabs from this forum but none has worked. The "wireless stereo" option in the bt settings when I pair it to my 8525 is grayed out ... does this mean that the headset cannot do music at all? Even though I really like this unit, if that's true, I'll need to return it and find one that does.
MrDSL said:
You need a headset with AD2P profile or your gonna need to get some hack to route all bt audio to a mono headset.
Click to expand...
Click to collapse
I'm pretty sure pocket player supports mono bluetooth headsets. Bad thing is it costs $20. Good thing is you can try it free for 30 days to make sure it does work. Or you can goto amazon and pick up the Jabra BT620 headphones for under $40; they work great for me.
Thanks to help from one of the members on here my bluetooth is now working fine for making/receiving calls.
However why does the audio from youtube app or tunein radio app not also come through my bluetooth device when paired and connected but instead through my HTC Desire loudspeaker?
Any one got any idea?
I'll try rephrasing the question.
Why doesnt a standard bluetooth in ear headset carry the full audio of my HTC Desire the way a pair of bluetooth headphones probably do and not just phone calls?
Either noone knows or the ones that do aren't seeing this thread.
I have Nokia BH-503 headset and I had the same problem. The calls would go through my headset, but everything else would play on the speaker. I noticed when I went to settings/Wireless & Networks/Bluetooth settings that my headset connects to phone audio, but not media audio.
I did some research and found a solution that works for me. I turn on the headset first, then bluetooth on my phone. Wait for a few seconds and that's that. My headset works perfectly and plays all audio from the device. When I go to settings, it says that the headset is connected to phone and media audio.
Try that and see if it works for you.
I'm only getting the option to use phone audio for some reason. I even tried switching my headset on first as you suggested.
My headset is a Nokia BH-102.
Any other ideas on how to get the media audio connected?
I think my bluetooth headset is just too crap to play media audio.
Hello, I just bought a bluetooth headset that supports both headset and a2dp mods.
I can listen to music fine.
And when i receive a call it switches to headset profile fine..
I can hear the call from earphones but..mic does not work.
I downloaded and tested with an application bluetooth mic tester and it was working fine in this application.
So no hardware problems with it.
What i suspect is, this headset doesnt have any pin code to pair devices..
You just discover the device and pair without any pins..
So, can it be a security issue not to enable microphone on calls?
And if so,
is there a way to change this behaviour, modiying a file etc on audio settings??
Thanks?